nas ns - Page 28 - Developer IT

Windows 7 can't make back up

- by J. Pablo Fernández

I've been trying to get Windows 7 to make a backup for a week or so. I'm backing up to a local NAS and I'm getting this error: Windows Backup: Troubleshooting Options Check your backup Windows Backup could not create a zip file. This could be because the drive that Windows is installed on does not have enough space or it could be a temporary error. Make sure you have at least 400 MB of free space and try again. Backup time: 2009-09-07 14:48 Backup location: \VANGELIS\Shared\Backup\lennon\ Error code: 0x81000015 My local hard disk has 290GB free and my NAS has 200GB free. Any ideas what might be wrong?

Read the article

Capture RTSP stream from IP Camera and store

- by Keerthi

I've got a few IP Cameras which output an RTSP (h264 mpeg4) stream. Hitting the URL locally via VLC: rtsp://192.168.0.21:554/mpeg4 I can stream the camera and dump to disk (on my desktop). I'd like to however store these files on my NAS (FreeNAS). I was looking at ways to capture the RTSP stream and dump them to disk but I'm unable to find anything. Is it possible to capture the stream on FreeBSD or Linux (RaspberryPi) and dump the streamed content to a disk local to Linux or FreeBSD - preferably every 30minutes? EDIT: The NAS is headless (HP N55L or something) and the RaspberryPi's are headless too. I've already looked into ZoneMinder but need something small. I was hoping maybe using Motion to detect motion on the stream but that will come later.

Read the article

Backup Exec backup-to-disk folder creation - Access denied

- by ewwhite

I'm having a difficult time creating a backup-to-disk folder in Symantec Backup Exec 12.5 and Backup Exec 2010. The backend storage is a Nexenta/ZFS-based NAS filer sharing the volume via CIFS. I've also seen the issue on other *nix-based NAS devices. I've attempted mapping the drive, providing the full paths to the folder, etc. I can browse to the share just fine from within Windows, but Backup Exec fails to create the B2D folder with different variants of a Unable to create new backup folder. Access denied error. I've attempted creating service accounts in Backup Exec to handle the authentication, but nothing seems to work. What's the key to making this work?

Read the article

Is it possible to restrict fileserver access to domain users using computers that are members of the domain?

- by Chris Madden

It seems domain isolation can be used to accomplish, but I'd like a solution that doesn't require IPsec, or more accurately, doesn't require IPsec on the fileserver. IPsec if done in software has a large CPU overhead and our NAS boxes don't support any kind of offload. The goal is to avoid authenticated users using non-managed machines to access network resources. Network Access Protection (NAP) and the various enforcement points looked promsiing but I couldn't find a bulletproof way to use them [which doesn't require IPsec on the fileserver]. I was thinking when a domain user accesses the NAS box it will first need a Kerberos ticket from AD, so if AD could somehow verify the computer that was requesting the ticket was in the domain I'd have a solution.

Read the article

make sure i've configured dns correctly

- by user22817

Hi, On my server with Windows Server 2008, i've added a new zone with my new domain: biografica.ro. I've added a name server for it: ns.biografica.ro and the ip of the server. Also i added two A hosts for ns.biografica.ro and www.biografica.ro. I've also defined first that name server on the site where i bought the domain and pointed it to my ip. Now, i understood that i have to wait 24-48 hours for this new domain to be available online. Question: - is this a way to check on the server that i've succesfully configured it? For instance: nslookup biografica.ro or nslookup www.biografica.ro or ping www.biografica.ro do not work locally, on the server... Can you give me an advice? Thanks.

Read the article

Machine account authentication on Radius server

- by O.Shevchenko

My workstation is under Linux. I have an Active Directory domain controller + Radius server on Windows 2008. I can verify user account 'radius-01' using 'radtest' tool: $ radtest -t pap radius-01 password123 195.234.133.32 1812 password123 Sending Access-Request of id 98 to 195.234.73.2 port 1812 User-Name = "radius-01" User-Password = "password123" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 rad_recv: Access-Accept packet from host 195.234.133.32 port 1812, id=98, length=84 Framed-MTU = 1344 Framed-Protocol = PPP Service-Type = Framed-User Class = 0x537004f00000013700010200ac1c0... I have joined my Linux PC to Active Directory domain ARB-HRK using Samba: [root@shev-arb]# net ads testjoin Join is OK I can dump machine password: [root@shev-arb]# tdbdump /var/lib/samba/private/secrets.tdb { key(34) = "SECRETS/MACHINE_PASSWORD/ARB-HRK" data(15) = "yGgXJsquRnpT0g\00" } How can i authenticate my machine account on Radius server? Do anybody know any tools for this, like: radtest shev-arb$ yGgXJsquRnpT0g 195.234.133.32 1812 password123 (this command fails)

Read the article

slow DNS resolution

- by Ehsan

I have a DNS server that resolves all queries for an internal group of servers. It is a bind on CentOS 5.5 (same as RHEL5) and I have set it up to allow recursion and resolve direction without any forwarders. The problem I am facing is that it takes a freakishly long amount of time to resolve a name for the first time. (in the magnitudes of 20 sec) This causes clients to give timeout. When I set it to forward all to Google's public DNS, i.e. 8.8.8.8+8.8.4.4, it works very nicely (within a second). I tried monitoring the traffic on the net to see why it is doing this: [root@ns1 ~]# tcpdump -nnvvvA -s0 udp tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 23:06:36.137797 IP (tos 0x0, ttl 64, id 35903, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<[email protected]... .....N.5.(6.M=...........www.paypal.com..... 23:06:36.140594 IP (tos 0x0, ttl 64, id 56477, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.6128 > 192.35.51.30.53: [udp sum ok] 10105 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@........#3....5.3fR'y...........www.paypal.com.......)........ 23:06:38.149756 IP (tos 0x0, ttl 64, id 13078, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.52425 > 192.54.112.30.53: [udp sum ok] 54892 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) [email protected]&.....6p....5.3.q.l...........www.paypal.com.......)........ 23:06:40.159725 IP (tos 0x0, ttl 64, id 43016, offset 0, flags [none], proto: UDP (17), length: 71) 172.17.1.4.24059 > 192.42.93.30.53: [udp sum ok] 11205 [1au] A? www.paypal.com. ar: . OPT UDPsize=4096 (43) E..G....@..@.....*].]..5.3..+............www.paypal.com.......)........ 23:06:41.141403 IP (tos 0x0, ttl 64, id 35904, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.10.36942 > 172.17.1.4.53: [udp sum ok] 19773+ A? www.paypal.com. (32) E..<.@..@..@... .....N.5.(6.M=...........www.paypal.com..... 23:06:42.169652 IP (tos 0x0, ttl 64, id 44001, offset 0, flags [none], proto: UDP (17), length: 60) 172.17.1.4.9141 > 192.55.83.30.53: [udp sum ok] 1184 A? www.paypal.com. (32) E..<[email protected].#..5.(...............www.paypal.com..... 23:06:42.207295 IP (tos 0x0, ttl 54, id 38004, offset 0, flags [none], proto: UDP (17), length: 205) 192.55.83.30.53 > 172.17.1.4.9141: [udp sum ok] 1184- q: A? www.paypal.com. 0/3/3 ns: paypal.com. NS ns1.isc-sns.net., paypal.com. NS ns2.isc-sns.com., paypal.com. NS ns3.isc-sns.info. ar: ns1.isc-sns.net. AAAA 2001:470:1a::1, ns1.isc-sns.net. A 72.52.71.1, ns2.isc-sns.com. A 38.103.2.1 (177) E....t..6./A.7S......5#..................www.paypal.com..................ns1.isc-sns.net..............ns2.isc-sns...............ns3.isc-sns.info..,.......... ..p.............,..........H4G..I..........&g.. (this goes on for a few more seconds) If you look carefully, you will see that the first 3-4 root servers did not respond at all. This wastes 7-8 seconds, until one of them responded. Do you think I have setup something wrong here? Interestingly, when I dig directly from the root servers that did not respond, the always respond very fast (showing the firewall/nat is not the issue here). E.g. dig www.paypal.com @192.35.51.30 works perfectly, consistently, and very fast. What do you think about this mystery?

Read the article

How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt?

- by Stu Thompson

Prelude: I'm a code-monkey that's increasingly taken on SysAdmin duties for my small company. My code is our product, and increasingly we provide the same app as SaaS. About 18 months ago I moved our servers from a premium hosting centric vendor to a barebones rack pusher in a tier IV data center. (Literally across the street.) This ment doing much more ourselves--things like networking, storage and monitoring. As part the big move, to replace our leased direct attached storage from the hosting company, I built a 9TB two-node NAS based on SuperMicro chassises, 3ware RAID cards, Ubuntu 10.04, two dozen SATA disks, DRBD and . It's all lovingly documented in three blog posts: Building up & testing a new 9TB SATA RAID10 NFSv4 NAS: Part I, Part II and Part III. We also setup a Cacit monitoring system. Recently we've been adding more and more data points, like SMART values. I could not have done all this without the awesome boffins at ServerFault. It's been a fun and educational experience. My boss is happy (we saved bucket loads of $$$), our customers are happy (storage costs are down), I'm happy (fun, fun, fun). Until yesterday. Outage & Recovery: Some time after lunch we started getting reports of sluggish performance from our application, an on-demand streaming media CMS. About the same time our Cacti monitoring system sent a blizzard of emails. One of the more telling alerts was a graph of iostat await. Performance became so degraded that Pingdom began sending "server down" notifications. The overall load was moderate, there was not traffic spike. After logging onto the application servers, NFS clients of the NAS, I confirmed that just about everything was experiencing highly intermittent and insanely long IO wait times. And once I hopped onto the primary NAS node itself, the same delays were evident when trying to navigate the problem array's file system. Time to fail over, that went well. Within 20 minuts everything was confirmed to be back up and running perfectly. Post-Mortem: After any and all system failures I perform a post-mortem to determine the cause of the failure. First thing I did was ssh back into the box and start reviewing logs. It was offline, completely. Time for a trip to the data center. Hardware reset, backup an and running. In /var/syslog I found this scary looking entry: Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_00], 6 Currently unreadable (pending) sectors Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_07], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 171 to 170 Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 16 Currently unreadable (pending) sectors Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 4 Offline uncorrectable sectors Nov 15 06:49:45 umbilo smartd[2827]: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error Nov 15 06:49:45 umbilo smartd[2827]: # 1 Short offline Completed: read failure 90% 6576 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 2 Short offline Completed: read failure 90% 6087 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 3 Short offline Completed: read failure 10% 5901 656821791 Nov 15 06:49:45 umbilo smartd[2827]: # 4 Short offline Completed: read failure 90% 5818 651637856 Nov 15 06:49:45 umbilo smartd[2827]: So I went to check the Cacti graphs for the disks in the array. Here we see that, yes, disk 7 is slipping away just like syslog says it is. But we also see that disk 8's SMART Read Erros are fluctuating. There are no messages about disk 8 in syslog. More interesting is that the fluctuating values for disk 8 directly correlate to the high IO wait times! My interpretation is that: Disk 8 is experiencing an odd hardware fault that results in intermittent long operation times. Somehow this fault condition on the disk is locking up the entire array Maybe there is a more accurate or correct description, but the net result has been that the one disk is impacting the performance of the whole array. The Question(s) How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt? Am I being naïve to think that the RAID card should have dealt with this? How can I prevent a single misbehaving disk from impacting the entire array? Am I missing something?

Read the article

Map a drive to root of a server (\\sever) in Vista

- by Andy T

Hi, In Win XP, I can very easily map a network drive to the root of my NAS server. I browse to it in Explorer (\192.168.1.70), choose "Map Network Drive", choose the drive letter, done. In Vista, this does not seem possible. I have to go "Map Network Drive" from 'Computer', then enter the address, but it will only let me map to specific shares (sub-folders off of the server root) and NOT to the server root share. Since my NAS has built-in shares (music, photo, video, etc.) then I would have to have drive letters for all of these, which I absolutely don't want. Can anyone tell me - how come I can easily map to the server root from XP, but not in Vista? Is there something fundamentally different in the networking across the two OS's? Or do I just need to do things a different way? Hope someone can help. Thanks, AT

Read the article

How to set up hosting on Heroku and email forwarders on a WHM (cPanel)?

- by matija

Read the article

Running SQL 2008 on a VM

- by chris.w.mclean

We are pondering trying to set up a SQL 2008 instance inside a VM for a production environment. All our SQL instances use iSCSI over gigabit ethernet to talk to a NAS, as would this new instance. Any reason this is a bad idea or any considerations to make this work well? The VM would be running in Xen 5.5 or we could set it up in Hyper-V if there's a compelling case for that. And the VM's VHD would be stored on a different NAS then the SQL storage is on.

Read the article

Rsync over NFS with QoS: How to view real transfer speed?

- by Ian Mackinnon

We have a bandwidth limit between a Linux server and a NAS, created using 'tc' with an IP filter. When writing to an NFS mount of the NAS, rsync claims a very high transfer speed for each file and then waits a long time before acknowledging that everything has finished. The total time taken is consistent with the QoS limit and the time taken by the same transfer over FTP. Why does the write to the NFS mount report higher transfer speeds than are actually happening over the network? How can I monitor the actual bandwidth of the transfer?

Read the article

Cannot Boot, How to recover

- by Kendor

Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

Read the article

setting up freedns with an existing domain

- by romeovs

I've been running a webserver off of a pc at a static IP succesfully for the past 5 months. recently however, I've moved into another appartment and my ISP only provides a dynamic IP (my IP changes from time to time). I'm not an internet genius but I was thinking to fix this by using a Dynamic DNS provider. So I got on the web and found freedns. I'm a bit confused about how to set up everything though. I've managed to succesfully install the IP updater daemon on my web server. Then, in my registrars control panel, I set the NS records to point at ns1 through ns4.afraid.org (removing the old NS records). I'm not certain what I should do with the A records though (for now they are still pointing to the old static IP address). I have A records for www, blog, irc, etc. but I cannot point them at my new IP address, because it isn't Could someone explain this in the clearest possible sense (perhaps elaborating on what happens at each step of the DNS process). I never really knew what the A records are for anyway. (note that I haven't really found any documentation at the freedns website, or on google)

Read the article

I added some options to stop spam with Postfix, but now won't send email to remote domains

- by willdanceforfun

I had a working Postfix server, but added a few lines to my main.cf in a hope to block some common spam. Those lines I added were: smtpd_helo_required = yes smtpd_recipient_restrictions = reject_invalid_hostname, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client multi.uribl.com, reject_rbl_client dsn.rfc-ignorant.org, reject_rbl_client dul.dnsbl.sorbs.net, reject_rbl_client list.dsbl.org, reject_rbl_client sbl-xbl.spamhaus.org, reject_rbl_client bl.spamcop.net, reject_rbl_client dnsbl.sorbs.net, reject_rbl_client cbl.abuseat.org, reject_rbl_client ix.dnsbl.manitu.net, reject_rbl_client combined.rbl.msrbl.net, reject_rbl_client rabl.nuclearelephant.com, permit It appears my postfix is now receiving normal emails fine, and blocking spam emails. But when I now try to use this server myself to send to a remote domain (an email not on my server) I get bounced, with maillog saying something like this: Nov 12 06:19:36 srv postfix/smtpd[11756]: NOQUEUE: reject: RCPT from unknown[xx.xx.x.xxx]: 450 4.1.2 <[email protected]>: Recipient address rejected: Domain not found; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<[192.168.1.100]> Is that saying 'domain not found' for gmail.com? Why is that recipient address rejected? An output of my postconf-n is: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = primarydomain.net myhostname = mail.primarydomain.net myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = $mydestination, primarydomain.net, secondarydomain.org sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_client_restrictions = permit_sasl_authenticated smtpd_helo_required = yes smtpd_recipient_restrictions = reject_invalid_hostname, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client multi.uribl.com, reject_rbl_client dsn.rfc-ignorant.org, reject_rbl_client dul.dnsbl.sorbs.net, reject_rbl_client list.dsbl.org, reject_rbl_client sbl-xbl.spamhaus.org, reject_rbl_client bl.spamcop.net, reject_rbl_client dnsbl.sorbs.net, reject_rbl_client cbl.abuseat.org, reject_rbl_client ix.dnsbl.manitu.net, reject_rbl_client combined.rbl.msrbl.net, reject_rbl_client rabl.nuclearelephant.com, permit smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = reject_unknown_sender_domain soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_domains = mail.secondarydomain.org virtual_alias_maps = hash:/etc/postfix/virtual Any insight greatly appreciated. Edit: here is the dig mx gmail.com from the server: ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.4 <<>> mx gmail.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 31766 ;; flags: qr rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 4, ADDITIONAL: 14 ;; QUESTION SECTION: ;gmail.com. IN MX ;; ANSWER SECTION: gmail.com. 1207 IN MX 5 gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 30 alt3.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 20 alt2.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 40 alt4.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 10 alt1.gmail-smtp-in.l.google.com. ;; AUTHORITY SECTION: gmail.com. 109168 IN NS ns1.google.com. gmail.com. 109168 IN NS ns4.google.com. gmail.com. 109168 IN NS ns3.google.com. gmail.com. 109168 IN NS ns2.google.com. ;; ADDITIONAL SECTION: alt1.gmail-smtp-in.l.google.com. 207 IN A 173.194.70.27 alt1.gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:4001:c02::1b gmail-smtp-in.l.google.com. 200 IN A 173.194.67.26 gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:400c:c05::1b alt3.gmail-smtp-in.l.google.com. 207 IN A 74.125.143.27 alt3.gmail-smtp-in.l.google.com. 249 IN AAAA 2a00:1450:400c:c05::1b alt2.gmail-smtp-in.l.google.com. 207 IN A 173.194.69.27 alt2.gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:4008:c01::1b alt4.gmail-smtp-in.l.google.com. 207 IN A 173.194.79.27 alt4.gmail-smtp-in.l.google.com. 249 IN AAAA 2607:f8b0:400e:c01::1a ns2.google.com. 281970 IN A 216.239.34.10 ns3.google.com. 281970 IN A 216.239.36.10 ns4.google.com. 281970 IN A 216.239.38.10 ns1.google.com. 281970 IN A 216.239.32.10

Read the article

Feedback on available mid-to-enterprise level desktop backup solutions [closed]

- by user85610

I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

Read the article

Routers with USB plug to connect external storage

- by sixtyfootersdude

I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

Read the article

How can you configure the uPnP server on windows home server?

- by pschorf

I'm currently helping my parents with their home network set up while I'm home. I have a Synology NAS device which supports a uPnP server. I have a few MPEG-4 movies stored on the box, and simply enabling the uPnP server on the NAS streamed the video to some devices they have, including their Xbox 360 and Samsung television. They have a windows home server (HP MediaSmart.) I put one of the movies in the "Videos" folder of the device, and enabled sharing. It shows up on the television, but when played it produces an "unsupported file type" error. I have all of the transcoding settings disabled on the Synology device, so it should be streaming the same file. Is there some additional configuration I need to perform on the home server unit?

Read the article

New SPC2 benchmark- The 7420 KILLS it !!!

- by user12620172

This is pretty sweet. The new SPC2 benchmark came out last week, and the 7420 not only came in 2nd of ALL speed scores, but came in #1 for price per MBPS. Check out this table. The 7420 score of 10,704 makes it really fast, but that's not the best part. The price one would have to pay in order to beat it is ridiculous. You can go see for yourself at http://www.storageperformance.org/results/benchmark_results_spc2The only system on the whole page that beats it was over twice the price per MBPS. Very sweet for Oracle. So let's see, the 7420 is the fastest per $. The 7420 is the cheapest per MBPS. The 7420 has incredible, built-in features, management services, analytics, and protocols. It's extremely stable and as a cluster has no single point of failure. It won the Storage Magazine award for best NAS system this year. So how long will it be before it's the number 1 NAS system in the market? What are the biggest hurdles still stopping the widespread adoption of the ZFSSA? From what I see, it's three things: 1. Administrator's comfort level with older legacy systems. 2. Politics 3. Past issues with Oracle Support. I see all of these issues crop up regularly. Number 1 just takes time and education. Number 3 takes time with our new, better, and growing support team. many of them came from Oracle and there were growing pains when they went from a straight software-model to having to also support hardware. Number 2 is tricky, but it's the job of the sales teams to break through the internal politics and help their clients see the value in oracle hardware systems. Benchmarks like this will help.

Read the article

IPV6 causing issue with DNS

- by Mike Wells

I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

Read the article

SQLite DB borked when opened on a different machine

- by pruefsumme

Hello, I'm using SQLite to store some data. The primary database is on a NAS (Debian Lenny, 2.6.15, armv4l) since the NAS runs a script which updates the data every day. A typical "select * from tableX" looks like this: 2010-12-28|20|62.09|25170.0 2010-12-28|21|49.28|23305.7 2010-12-28|22|48.51|22051.1 2010-12-28|23|47.17|21809.9 When I copy the DB to my main computer (Mac OS X) and run the same SQL query, the output is: 2010-12-28|20|1.08115035175016e-160|25170.0 2010-12-28|21|2.39343503830763e-259|-9.25596535779558e+61 2010-12-28|22|-1.02951149572792e-86|1.90359837597183e+185 2010-12-28|23|-1.10707273937033e-234|-2.35343828462275e-185 The 3rd and 4th column have the type REAL. Interesting fact: When the numbers are integer (i.e. they end with ".0"), there is no difference between the two databases. In all other cases, the differences are ... hm ... surprising? I can't seem to find a pattern. If someone's got a clue - please share!

Read the article

Has anyone figured out how to use same username with different passwords (Windows)

- by Coder

Tried Googling, tried net use, and anything I could, with no results. I have a PC with users, and I have a network server with shared folders. For some users the usernames of the share and local account match, but the passwords are different (a good security practice). Unfortunately, Windows doesn't want to remap the drives on login, and asks for credentials when I try to connect. If I enter the password, the connection succeeds, but it still fails on next login, even if I have checked the "remember" checkbox. On PC: usera@machinea pass1 On NAS: usera@nas pass2 net use z: \\nasip\usera /user:nasip\usera pass2 /persistent:yes Credential store seems to have the user credentials stored... But the mapping fails all the time.

Read the article

Restoring file properties but not the complete files, from backup

- by Jon

While copying data from my old storage on a Linux computer to the new (linux-based) NAS, I accidentially failed with getting the properties (most important: the modify dates) along to the new location. I also continued to use/modify the files at the new location and hence, cannot just copy it all over again. What I would like to do is a diff between files in the old vs. the new storage, and for those being identical, restore the properties from Linux storage to the NAS storage files. Is there a clever way such as a script or a tool to do this? I could either run it on the Linux box or in worst case from a remote Windows computer. Grateful for any suggestions. /Jon

Read the article

How can I unobstrusively backup a few client's email?

- by tladuke

This is a small office. Our web/email server is a shared host. In the office we have a windows 2008 box up all the time that runs our NAS and a couple other services. I don't have access to the ISP admin stuff, but I assume it has cpanel or something like that. I can get access if I ask. I want to get email backed up from the server to our NAS without the users having to do anything. I suppose I could set up Outlook on that server with everyone's account, but that's a terrible idea, maybe (would sent mail. The boss uses outlook, but we have Apple Mail and Thunderbird clients too. I guess the important thing is that outlook look at the backups, so boss is happy. Then again, maybe it should be stored in whatever is the most portable format (that will work on NTFS) This is for about 10 users.

Read the article

Prevent Nautilus from displaying thumbnails on a specific mount

- by Zakhar

I have written a filesystem over Fuse to access a remote pseudo-NAS (the French "Freebox V6", I'll soon publish it as GPL3... when it's a little bit more polished!). The NAS is connected to a home ADSL, thus data comes down at the upload speed of ADSL, which is at best 1Mbps. My mount works fine (read-only at the moment), but Nautilus sees the mountpoint (and all sub-directories) as a "local" filesystem and tries to make thumbnails. As I have a directory full of images, this is quite horrible, because Nautilus then opens ALL the images to try to display the thumbnail. I could switch the Nautilus preferences to "Never" for thumbnails, but then I'll loose thumbnails on my "real" local filesystem. So the question is: with the preference "Only for local filesystem", how can I instruct Nautilus that my mountpoint is in fact NOT a local mount so that it will stop trying to draw thumbnails on that specific mount, but continue "thumbnailing" on mounts that are really local? Edit note: the same things happens if you use "standard worldwide" mounts such as sshfs, davfs,... as long as you mount over a relatively slow network (ADSL) and have images/movies on your mounted tree.

Search Results

Search found 1514 results on 61 pages for 'nas ns'.

Page 28/61 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35 | Next Page >

- by J. Pablo Fernández

- by Keerthi

- by ewwhite

- by Chris Madden

- by user22817

- by O.Shevchenko

- by Ehsan

- by Stu Thompson

- by Andy T

- by matija

- by chris.w.mclean

- by Ian Mackinnon

- by Kendor

- by romeovs

- by willdanceforfun

- by user85610

- by sixtyfootersdude

- by pschorf

- by user12620172

- by Mike Wells

- by pruefsumme

- by Coder

- by Jon

- by tladuke

- by Zakhar

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35 | Next Page >