Search Results

Search found 1466 results on 59 pages for 'reliable'.

Page 28/59 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Calculating IOPS for a single HDD - what am I doing wrong?

    - by red888
    So I know there is no standardized way of calculating IOPS for a HDD, but from everything I have read it appears one of the most accurate formulas is the following: IOP/ms = + {rotational latency} + ({block size} / {data transfer rate}) Which is IOs per millisecond or what the book I've been reading calls "Disk Service Time". Also rotational latency is calculated as half of one rotation in milliseconds. This was taken from the EMC book "Information Storage and Management" -arguably a pretty reliable source right\wrong? Putting this formula into practice consider this Seagate data sheet. I am going to calculate IOPS for the ST3000DM001 model for a block size of 4kb: Seek Average (Write) = 9.5 -I'll measuring IOPS for writes Spindle speed = 7200rpm Average Data Rate = 156MB/s So my variables are: Seek Time = 9.5ms Rotational latency = (.5 / (7200rpm / 60)) = 0.004s = 4ms Data Rate = 156MB/s = (0.156MB/ms / 0.004MB) = 39 9.5ms + 4ms + 39 = IO/ms 52.5 1 / (52.5 * 0.001) = 19 IOPS 19 IOPS for this drive clearly is not right so what am I doing wrong?

    Read the article

  • How do you determine the OWNER of an Oracle Database

    - by Kwang Mark Eleven
    When you install an Oracle database in a Unix server, the Unix user id you use for the installation becomes the OWNER of the database. What is the most reliable and general way of determining in a shell script which Unix user is the owner of an Oracle installation? I mean, can you perform a grep on a file created by the installation to find this information or shall I resort to use the ls command on a specific file on a specific directory. If the name of the file to be checked is also variable, I would need to have a way of determining the name and path to the file. Thanks in advance for your time

    Read the article

  • Nexenta under KVM?

    - by Nick
    I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

    Read the article

  • Setting up podcasting for a non-tech user

    - by Force Flow
    I have a user who wants to start making podcasts, but they only have basic skills when it comes to technology. So, I was trying to get a process together that would be easy for them to follow. To upload files (the mp3's and rss feed files), I have an explorer shortcut for their FTP space. To record the podcast, I was going to either use audacity or PodProducer. For the RSS feed, I was looking for a podcast RSS generator of some sort. In my search for this, I've come across a lot of dead links and a lot of paid tools, so I haven't come up with anything too useful. Is there a free, reliable webservice or windows-based tool available that folks like to use?

    Read the article

  • Filesystem to quickly get recent modifications

    - by liori
    Hello, I've got relatively big filesystem (ext4) with lots of small files and I'd like to backup it. Making full backups often is not feasible to me so I want to have a way to make differential/incremental backups (differential preferred). But... this is laptop, and scanning for changed files takes lots of time. My questions: 1) Is it possible to get list of files changed since some date from ext4's journal? I know it wasn't designed with this idea in mind, and it might be too small for bigger timespans, but maybe it is somehow possible? 2) Is it possible to monitor filesystem modifications and maintain a list of changed files reliably? I think I could use inotify, but this might be too slow to monitor full filesystem and might be unreliable. (by reliable I mean either I get all modifications since last backup (and this list is not missing anything) or an error message). Laptop runs Debian unstable.

    Read the article

  • Windows FTP client to mirror ftp sites?

    - by user15318
    I need a Windows application that works like *nix's lftp. The Windows host will download the latest changes made to FTP Server #1, and upload those changes to FTP Server #2. Server #2 can't pull files directly from Server #1 because it's a www shared host with no shell account. The requirements are: 1. Windows app available for XP/Vista/W7 2. Must run either as icon or service. I don't want to have an extra icon open in the task bar 3. Reliable, so I don't have to worry about it. Is there an application you would recommend? Thank you.

    Read the article

  • Recommend a good DVD or BD replacement drive that can read older CD-R/DVD+R media?

    - by Irinotecan
    So I have a bunch of older CD-R (and a few DVD+R) discs that are either suffering from "bit rot", or a case of crappy no-name Chinese DVD drives being unable to read some or all of anymore. I just threw my last no-name DVD drive in the trash after it ejected a disk still spinning causing it to scratch to the point of being useless, so I'm looking for a replacement drive this time around with an eye for quality over a dirt cheap price. I'd prefer a BD drive, but I'll take any suggestions for good, reliable DVD or BD drives that people have reported having good success with for reading older burned media. Any takers?

    Read the article

  • CentOS VM, NTP synchronization problems

    - by Spirit
    We have three CentOS 5.9 VMs on an ESX3.5 host. Because of the nature of the services we provide it is required that the NTP time is synchronized and the time is correct on all three of them. However one of them constantly drifts back each day for about 66 sec. So far none of us seems to understand as why is this happening. We included the possibility that the VM may be somehow pulling the time from the host, however all of the three VMs have identical configuration settings and they did not have VMware tools installed. Although I realize that this is probably a question of an internal matter and not to ask for on a forum, I would appreciate if anyone of you knows some CentOS NTP diagnostic routines that will help me to diagnose the problem and find a reliable solution. I thank you for the assistance.

    Read the article

  • Mapping an sFTP connection to a Windows drive?

    - by Nicolas
    I'm looking for a way to map an sFTP connection to a Windows (Vista) drive. In other words, a tool that would add a new drive (let's say N:) to my computer, that would directly point to my remote server via sFTP. That way, "N:\my_dir\file.txt" would actually be something like "/home/user/my_dir/file.txt" on the remote server. Reading the file on Windows would download it, and writing content in it would upload it...network transfers being made via sFTP. I'm aware of Novell NetDrive, but it has various issues with long filenames, and seems to corrupt UTF-8 files content depending on the BOM. Do you know about any reliable alternative ? Thanks ! Edit : I have complete control of the remote server, except that it's remote enough for me not to be able to physically access it.

    Read the article

  • Redundant APC UPS units, single server set up

    - by Sholom
    Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

    Read the article

  • FoxPro 2.6 DOS on Windows 7 64-bit

    - by Rolando
    I support a company that has a very old, mission critical, FoxPro for DOS 2.6 (FPD) application. For variuos reasons the company didn't adapt/migrate their app, which, ironically, has been running even better under Windows XP (and 32-bit Win7) because the OS allowed new features like more reliable networking, distributed printing, email integration. Unfortunately for this company, most new machines now come with a 64-bit version of Windows 7, which is incompatible with their FPD app. I know this time the writing is on the wall: the only long-term solution is to migrate their app. But I wonder if anyone can suggest a temporary alternative path, which doesn't involve either: downgrade 64-bit Windows to 32-bit, or run the app on a virtualized 32-bit XP

    Read the article

  • LVM mirroring VS RAID1

    - by syrenity
    Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

    Read the article

  • Why do some web servers not respond to icmp requests?

    - by John Himmelman
    What is the purpose of blocking/dropping inbound ICMP traffic on a public web server? Is it common for it be blocked? I had to test if a server was accessible from various locations (tested on various servers located in different states/countries). I'd rely on ping as a quick & reliable method of determining if a server was online/network-accessible. After not receiving a response on a couple boxes, I tried using lynx to load the site, and it worked.

    Read the article

  • What are the IPv6 Public and Private and Reserved ranges

    - by vipin raj
    I just want to know what are all the public IPv6 ranges which ISPs or other users can use? Also need a list of addresses which can be used in private networks and also the list of addresses which never can be used in any network. I have been searching through different web sites. But none gives a reliable answer. Actually we are developing an application which allows user to plan their IP address(create supernets, subnets, hosts, assign host to ports etc). So my application should be able to distinguish between all kinds of address ranges, whether it is reserved, public, private, multicast etc

    Read the article

  • MySql calculate number of connections needed

    - by Udi I
    I am trying to figure my needs regarding web service hosting. After trying Azure I have realized that the default MySql they provide (through a third party) limits the account to 4 connections. You can then upgrade the account to 15, 30 or 40 connections (which is quite expensive). Their 15 connections plan is descirbed as: "Excellent choice for light test and staging apps that need a reliable MySQL database". I have 2 questions: if my application is a web service which needs to preform ~120k Queries a day (Normal/BELL distribution) and each query is ~150ms(duration)/~400ms(fetch), how many connection do I need? If instead of using cloud computing, I will choose a VPS, how many connections will I be able to handle on a 1GB 2 cores VPS? Thank you!

    Read the article

  • Run command before and after printing with CUPS?

    - by leto
    Hello, this is a home setup. A central printer server (Linux) manages the queue, a HP 2430DTN is attached to it via 100Mbit/sec Ethernet. The printer is hooked up to a managable power source. A shell script watches the queue on the server (lpstat -o) and turn on the printer when there is a job. If the queue is empty for 10 minutes it turns the printer off. Now this setup messes up, stops the printer etc. after a couple of weeks and is in general "not so reliable". I now know how to change the stop-printer thing, but: Is there a way to run my turn printer on script and turn printer off script directly from cups without watching the queue? That would be so cool!

    Read the article

  • Windows 7 RC sleep on Thinkpad R51?

    - by Ragesh
    I have an old Thinkpad R51 and Windows 7 just doesn't give me a Sleep option. I suspect it's because it's running the default VGA driver. The machine has an Intel 855 GME graphics adapter but there doesn't seem to be a WDDM driver available publicly. Lenovo's driver download page just says that drivers for Vista are bundled with the OS. Apparently, they aren't bundled with Windows 7 as it always defaults to a generic VGA driver. Is there a reliable way to get Sleep to work on this machine?

    Read the article

  • GPU Computing - # of GPUs supported

    - by TehTypoKing
    I currently have a desktop with 6 GPUs ( 3x HD 5970s ) in non-crossfire mode. Unfortunately, it seems that Windows 7 64bit only supports up to 4 GPUs. I have not been able to find a reliable source to deny or confirm this. If windows 7 has this limitation, is there a Linux flavor that supports more than 4 GPUs? In-case you are wondering, this is not for gaming but high-speed single precision computing. With this current setup ( if I can find 6gpu support ) I am looking to reach 13.8 Teraflops. Also, my motherboard does support 3 16x pci-xpress gen2 slots... and I have a 1500w powersupply plugged into a 20amp outlet. Windows is able to detect all 6 cores.. although, 2 of which displays the warning "Drivers failed to load". To recap: - Can windows support 6 GPUs? - If not, does Linux? Thank you.

    Read the article

  • What specs to consider when buying SSD?

    - by penyuan
    When I bought "traditional" hard drives, I have been told to consider specs like RPM (5400, 7200, etc.), buffer size (16MB, 32MB etc.), and interface (IDE, SATA, etc.). (did I miss something?) What about solid state drives (SSD)? What are some important specs to consider in terms of performance and reliability? By the way, are SSDs just as reliable as traditional hard drives now? A couple years ago I heard they're not, but that's a "long time" ago now. Thanks for your answer.

    Read the article

  • Office jukebox systems

    - by Jona
    We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

    Read the article

  • Using a second wifi router as a wireless bridge

    - by Greg-J
    I purchased a D-Link DGL-4500 to replace my aging WRT54G around a year ago, only to find it nowhere near as reliable. It's been collecting dust since. I'm wondering if there is a way to use it as a wireless bridge so I can connect it to my home network and then use it's ethernet ports to provide network access to several devices. Is this something that can be done? If not, are there devices meant for this? Any help would be appreciated.

    Read the article

  • Feedback on available mid-to-enterprise level desktop backup solutions [closed]

    - by user85610
    I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

    Read the article

  • Domain name in server other than the website

    - by med
    Hello! I'm not very popular with hosting, but I have a special situation: I live in Tunisia, I can buy a domain name with .tn extention, but the problem is that: 1- The domain could not be pointed to a server outside Tunisia 2- All servers in Tunisia are bad, no one provides really reliable hosting so, I want to use the .tn domain with a basic hosting in Tunisia, and Make other db queries and rich media on another remote server outside Tunisia. How to do it? Is there better alternatives? All suggestions are welcome :) Thank you.

    Read the article

  • Can font substitutions in MS Word be controlled?

    - by Jukka K. Korpela
    Suppose that I am typing text in MS Word (any version) and I enter a character that does not exist in the font being used. Say, I’m using Times New Roman and I type 2300 Alt X, which turns to the diameter sign “?”, which does not exist in Times New Roman. MS Word picks it up from a different font, like Arial Unicode MS. This may mess up the typographic style, or line spacing. And this happens without notice. Perhaps the most inconvenient feature here is that MS Word does not automatically return to the original font. Subsequent text appears in the replacement font, unless the user sees what is happening and realizes that he needs to change the font. The question is: Can such substitutions be controlled, e.g. by specifying the font(s) to be used as backup fonts? If not, is there any reliable documentation about it?

    Read the article

  • Why do servers go down after a lot of traffic?

    - by mohabitar
    I'm working on an iOS app that makes extensive use of databases, where users will be able to sync their data to a server. However, I'm terrified of the event that if too many users start using the app, the servers will no longer be able to handle it. I'm not a server guy at all and am not too familiar with how that works, but my question is, why do servers get overloaded and how can that be prevented? Does it have to do with who my server host is? Or is it about the efficiency of my code? If my host is a reliable server, such as Amazon AWS, am I still at risk for server problems? Bottom line is, does it have to do with the way I implement my code, or does it have to do with who my host is?

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >