Search Results

Search found 1627 results on 66 pages for 'serial'.

Page 28/66 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Setting up Ubuntu on my mother's computer

    - by idealmachine
    Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

    Read the article

  • Why wifi doesn't work in this case?

    - by xRobot
    I have a brand new notebook where I have installed Windows 7 and Ubuntu 12.04 LTS 64bit in dual boot. In windows 7 wifi works but in Ubuntu not. Could you help me please ? iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: b4:b5:1f:1b:9a:56 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:3000(size=256) memory:c2404000-c2404fff memory:c2400000-c2403fff *-network description: Wireless interface product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 84:4b:f4:0a:3a:22 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-31-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:c2500000-c250ffff lspci | grep -i net 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 02:00.0 Network controller: Ralink corp. Device 539a iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Device or resource busy eth0 Interface doesn't support scanning. lsmod Module Size Used by rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224173 1 joydev 17693 0 hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 97362 0 snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device arc4 12529 2 rt2800pci 18715 0 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 51144 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib soundcore 15091 1 snd mac_hid 13253 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev wmi 19256 1 hp_wmi i915 473240 3 cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 serio_raw 13211 0 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 rfkill list: # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • sony vaio WLAN problem using 12.04

    - by Fredrik
    I'm unable to get my WLAN to work for my Sony Vaio model VPCF23C5E No problem connecting from windows, smartphones etc. $ sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 64:27:37:92:99:0f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-29-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:f7000000-f707ffff memory:f7080000-f708ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: f0:bf:97:dd:b2:bd size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-1.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:50 ioport:9000(size=256) memory:e2104000-e2104fff memory:e2100000-e2103fff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise Linux siriedit 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no [ 1.287449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 18.273582] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS Seen some proposed solution e.g. Wireless network cannot be enabled for Sony VAIO E series but answers there don't solve my problem... I'm out of ideas :-( What else can I check? update $ ifconfig -a eth0 Link encap:Ethernet HWaddr f0:bf:97:dd:b2:bd inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f2bf:97ff:fedd:b2bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 TX packets:4444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4568435 (4.5 MB) TX bytes:610624 (610.6 KB) Interrupt:50 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1498 errors:0 dropped:0 overruns:0 frame:0 TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:114156 (114.1 KB) TX bytes:114156 (114.1 KB) wlan0 Link encap:Ethernet HWaddr 64:27:37:92:99:0f inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6627:37ff:fe92:990f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:483155 (483.1 KB) TX bytes:61031 (61.0 KB)

    Read the article

  • Which card readers support HID (Human Interface Device) and emulate keyboard input? [closed]

    - by Level1Coder
    I'm looking for a card reader to interface with an inhouse webapp and need it to emulate keyboard input to type the card data (serial number) into a web form. A simple usage scenario would be where I open notepad, have notepad focused as front most, swipe the card, and the card reader can type out the card data into notepad as plain text. As long as this works, the card data can work with any web form. Which card readers supports this kind of keyboard emulation mode?

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10 oneiric

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

  • USB hub keep changing ports

    - by Danniel Magno
    I have an external powered USB hub and I'm using gammu to send some SMSs, but every time the daemon connect to one specific modem, it has the port changed. Gammu is able to send just one SMS and after that the port is changed. I've already tried using: /dev/ttyUSB3 /dev/serial/by-path/pci-0000:00:0b.0-usb-0:3.4.3:1.0-port0 There is anything to do which will stop the ports to be changed or use any other fixed port? Thanks.

    Read the article

  • Wireless network disabled

    - by neil delmonte
    After installing Ubuntu 11.04, my network has become disabled. Here is the output oflshw in terminal: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 00:21:00:58:65:5f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:d4600000-d4603fff

    Read the article

  • IO Profiling of Applications: MPI Apps

    <b>Linux Magazine:</b> "In the last article we looked at using strace to examine the IO patterns of simple serial applications. In the High Performance Computing (HPC) world, applications use MPI (Message Passing Interface) to create parallel applications. This time around we discuss how to attack parallel applications using strace."

    Read the article

  • Quelles professions attirent le plus de psychopathes ? Le métier d'ingénieur ne figure pas sur la liste

    Quelles professions attirent le plus de psychopathes ? le métier d'ingénieur n'en fait pas partieKevin Dutton, psychologue et chercheur au Farady Institute for Science and Religion à l'université de Cambridge, explique dans son ouvrage " The Wisdom of Psychopaths: What Saints, Spies, and Serial Killers Can Teach Us About Success " comment les psychopathes réussissent mieux dans certaines professions. Avant toute chose il est important de préciser que, contrairement à la croyance populaire,...

    Read the article

  • SChannel "cannot find certificate in either LocalMachine or CurrentUser store"

    - by Chris J
    We have an in-house application that requires the use of client SSL certificates to authenticate with a remote server (not under our control). This has worked without problems before but on deploying to a new server, we're having problems getting Windows 2008 to use the certificate. The certificate exists as a .pfx file that contains a private key. The same certificate exists in the LocalMachine store, again with its private key. We've ensured the one in the LocalMachine store is correct by creating a website in IIS against that certificate, so we're happy that the certificate, certificate chain, and private key is valid. The PFX has been created by exporting from the Certificates MMC snap-in. The issue is that we get the following in the system diagnostic logs that suggests it can't find the private key: System.Net Information: 0 : [5988] SecureChannel#23264094 – Locating the private key for the certificate: [Subject] CN=internal-server.company.com, OU=Servers, OU=Devices, O=org [Issuer] CN=SubCA02, OU=CA, o=org [Serial Number] 407ABCDE [Not Before] 31/10/2013 11:08:48 AM [Not After] 31/10/2016 11:08:48 AM [Thumbprint] 4354A34F6004F019E60F055979A47E50F62D1504 . System.Net Information: 0 : [5988] SecureChannel#23264094 – Cannot find the certificate in either the LocalMachine store or the CurrentUser store. I've validated the thumbprint, issuer and serial number listed in the log with the certificate in the LocalMachine store and these marry up. From what I can tell with much searching, this appears to be a permissions issue. The user the application is running as has been granted access to the private key (Personal Certificates - right click on the certificate - all tasks - Manage Private Keys), so I'm now at a loss as to which permission(s) it may be that is causing the issue.

    Read the article

  • Smart Array P400 - Accelerator Replacement Battery Failure

    - by inflammable
    TL;DR - Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator for a Smart Array P400 controller a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? We have a slightly confusing situation with a Smart Array P400 storage controller with the 512mb battery backed accelerator addon on an HP DL380 server. The storage controller is (afaik) running the latest firmware and driver: Model: Smart Array P400 Controller Status: OK Firmware Version: 7.24 Serial Number: *snip* Rebuild Priority: Medium Expand Priority: Medium Number Of Ports: 2 The storage diagnostic (both on the both boot-up screen for the controller and within the 'Management Homepage' and the 'HP Array Diagnostic Utility') recently starting showing the following status a fault for the battery for the accelerator: Accelerator Status: Temporarily Disabled Error Code: Cache Disabled Low Batteries Serial Number: *snip* Total Memory: 524288 KB Read Cache: 25% Write Cache: 75% Battery Status: Failed Read Errors: 0 Write Errors: 0 We replaced the battery with a new unit (a visual inspection of the P400 card showing nothing unusual) and saw the same fault - but expected this to disappear over the course of a few hours/days as it charged. This didn't happy, and the fault status remains the same as above. Given the battery is a genuine part from HP, I wouldn't have expected a replacement battery to fail straight away, or to be dead-on-arrival (is that naivety on my part?). Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? Is there any diagnostic that could tell me more about the failed battery, without cracking the server open again? Many thanks!

    Read the article

  • blu-ray archiving in vmware ESXi 4

    - by spacecadet77
    Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

    Read the article

  • Problem with switch dell 6224

    - by Matias
    Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

    Read the article

  • Is it possible to shrink the size of an HP Smart Array logical drive?

    - by ewwhite
    I know extension is quite possible using the hpacucli utility, but is there an easy way to reduce the size of an existing logical drive (not array)? The controller is a P410i in a ProLiant DL360 G6 server. I'd like to reduce logicaldrive 1 from 72GB to 40GB. => ctrl all show config detail Smart Array P410i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: 5001438006FD9A50 Cache Serial Number: PAAVP9VYFB8Y RAID 6 (ADG) Status: Disabled Controller Status: OK Chassis Slot: Hardware Revision: Rev C Firmware Version: 3.66 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 3 secs Surface Scan Mode: Idle Queue Depth: Automatic Monitor and Performance Delay: 60 min Elevator Sort: Enabled Degraded Performance Optimization: Disabled Inconsistency Repair Policy: Disabled Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 15 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Enabled Total Cache Size: 512 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 412476 MB Status: OK Logical Drive: 1 Size: 72.0 GB Fault Tolerance: RAID 1+0 Heads: 255 Sectors Per Track: 32 Cylinders: 18504 Strip Size: 256 KB Status: OK Array Accelerator: Enabled Unique Identifier: 600508B1001C132E4BBDFAA6DAD13DA3 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 196 MB, / 12.0 GB, /usr 8.0 GB, /var 4.0 GB, /tmp 2.0 GB OS Status: LOCKED Logical Drive Label: AE438D6A5001438006FD9A50BE0A Mirror Group 0: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 146 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 146 GB, OK) SEP (Vendor ID PMCSIERA, Model SRC 8x6G) 250 Device Number: 250 Firmware Version: RevC WWID: 5001438006FD9A5F Vendor ID: PMCSIERA Model: SRC 8x6G

    Read the article

  • Time drift in Cloud Server - need to mainpulate GRUB config

    - by Aditya Advani
    We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

    Read the article

  • openssl client authentication error: tlsv1 alert unknown ca: ... SSL alert number 48

    - by JoJoeDad
    I've generated a certificate using openssl and place it on the client's machine, but when I try to connect to my server using that certificate, I error mentioned in the subject line back from my server. Here's what I've done. 1) I do a test connect using openssl to see what the acceptable client certificate CA names are for my server, I issue this command from my client machine to my server: openssl s_client -connect myupload.mysite.net:443/cgi-bin/posupload.cgi -prexit and part of what I get back is as follow: Acceptable client certificate CA names /C=US/ST=Colorado/L=England/O=Inteliware/OU=Denver Office/CN=Tim Drake/[email protected] /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=myupload.mysite.net/[email protected] 2) Here is what is in the apache configuration file on the server regarding SSL client authentication: SSLCACertificatePath /etc/apache2/certs SSLVerifyClient require SSLVerifyDepth 10 3) I generated a self-signed client certificate called "client.pem" using mypos.pem and mypos.key, so when I run this command: openssl x509 -in client.pem -noout -issuer -subject -serial here is what is returned: issuer= /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=myupload.mysite.net/[email protected] subject= /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=mlR::mlR/[email protected] serial=0E (please note that mypos.pem is in /etc/apache2/certs/ and mypos.key is saved in /etc/apache2/certs/private/) 4) I put client.pem on the client machine, and on the client machine, I run the following command: openssl s_client -connect myupload.mysite.net:443/cgi-bin/posupload.cgi -status -cert client.pem and I get this error: CONNECTED(00000003) OCSP response: no response sent depth=1 /C=US/ST=Colorado/L=England/O=Inteliware/OU=Denver Office/CN=Tim Drake/[email protected] verify error:num=19:self signed certificate in certificate chain verify return:0 574:error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca:/SourceCache/OpenSSL098/OpenSSL098-47/src/ssl/s3_pkt.c:1102:SSL alert number 48 574:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-47/src/ssl/s23_lib.c:182: I'm really stumped as to what I've done wrong. I've searched quite a bit on this error and what I found is that people are saying the issuing CA of the client's certificate is not trusted by the server, yet when I look at the issuer of my client certificate, it matches to one of the accepted CA returned by my server. Can anyone help, please? Thank you in advance.

    Read the article

  • Communicating via Command Mode with IBM HS22 IMM via AMM

    - by MikeyB
    On previous model blades that contained a BMC, I was able to communicate from our external management station via pass-through commands to the BMC to do things such as power blades on/off, set VPD parameters, reboot the BMC, etc. Now on the HS22, a bunch of things happen differently. For example, we can no longer use the same pass-through commands to write VPD information pages and have them persist across reboots of the IMM - it looks as though those VPD pages are populated from information contained in the IMM. How do we use the Advanced Settings Utility from an external host to communicate with HS22 IMMs? Alternatively, what TCP Command Mode commands do we need to send to the AMM to communicate with the IMM? For our purposes, we specifically cannot communicate with the IMM from the blade itself. Specific example: When I send a pass-thru IPMI command via the AMM to the blade BMC to write information (such as MTM, Serial) into VPD page 0x10, it persists on blades with a BMC (HS21 for example). I can send the same IPMI command to write data to the VPD page on the HS22, however it does not persist across reboots of the IMM. What IPMI commands do I need to send to the IMM? What IPMI commands are asu sending when it sets the MTM & Serial?

    Read the article

  • DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

    - by Kev
    I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

    Read the article

  • Are SATA II and SATA 3.0 Gbps compatible?

    - by Johnny Maelstrom
    I am trying to check that if I buy a new internal HDD it will work in the NAS I am buying. Currently I'm confused about naming schemes and once that is resolved whether there is compatibility. I will gladly author this question to be more general if there is not already an article helping with the confusion of SATA naming and standards. I see similar, but not identical questions and will accept this as a duplicate if thought as such. The specifications on the eCommerce site for the NAS says, "Controller Interface Type Serial ATA-150", the product home page for the manufacturer says, "Compatible with SATA and SATA II HDD". The specifications on the eCommerce site for the hard drives say, "Interface Type Serial ATA-300", the product home page for the manufacturer says, "Interface SATA 3.0 Gbps" Wikipedia says many things about different naming conventions, the closest being, "SATA II 3.0 Gbit/s, which was colloquially referred to as "SATA 3G" [bps] or "SATA 300" [MB/s] since 1.5 Gbit/s SATA I and 1.5 Gbit/s SATA II were referred to as both "SATA 1.5G" [b/s] or "SATA 150" [MB/s]). Therefore, they will operate with negligible differences between them." Are SATA II and SATA 3.0 Gbps the same? I feel I'm tantalisingly close to getting a definitive answer here before I purchase, but really want to clear up these naming schemes.

    Read the article

  • Ubuntu xrandr rotate issue

    - by user83544
    I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

    Read the article

  • Architecture for highly available MySQL with automatic failover in physically diverse locations

    - by Warner
    I have been researching high availability (HA) solutions for MySQL between data centers. For servers located in the same physical environment, I have preferred dual master with heartbeat (floating VIP) using an active passive approach. The heartbeat is over both a serial connection as well as an ethernet connection. Ultimately, my goal is to maintain this same level of availability but between data centers. I want to dynamically failover between both data centers without manual intervention and still maintain data integrity. There would be BGP on top. Web clusters in both locations, which would have the potential to route to the databases between both sides. If the Internet connection went down on site 1, clients would route through site 2, to the Web cluster, and then to the database in site 1 if the link between both sites is still up. With this scenario, due to the lack of physical link (serial) there is a more likely chance of split brain. If the WAN went down between both sites, the VIP would end up on both sites, where a variety of unpleasant scenarios could introduce desync. Another potential issue I see is difficulty scaling this infrastructure to a third data center in the future. The network layer is not a focus. The architecture is flexible at this stage. Again, my focus is a solution for maintaining data integrity as well as automatic failover with the MySQL databases. I would likely design the rest around this. Can you recommend a proven solution for MySQL HA between two physically diverse sites? Thank you for taking the time to read this. I look forward to reading your recommendations.

    Read the article

  • Unable to write DVD-R(Blank DVD's)

    - by FrozenKing
    I have a problem in dvd drive i.e. It can read CD/DVD and can write CD and all CD/DVD-RW but cannot write DVD DVD drive model is SH-S203B Samsung; I also have a log file created by nero burning rom 11. Actually the fact is no Blank DVD's are being read in my dvd drive only previously written dvd's can be read! Is this the problem of OS or should I try cleaning the dvd drive or my DVD drive is 4yrs old so is it going to spoil now, since it is showing this type of symptoms! OS = WinXP AV = KIS 2012 DVD Drive = Samsung SH-S203B (Also tried latest firmware and downgrade versions also) IA32 Nero Version: 11.2.4.100 Internal Version: 11,2,4,100 Recorder: <TSSTcorp CDDVDW SH-S203B>Version: SB04 - HA 1 TA 0 - 11.2.4.100 Adapter driver: <Serial ATA> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data CD-ROM: <TSSTcorp CDDVDW SH-S203B >Version: SB04 - HA 1 TA 0 - 11.2.4.100 Adapter driver: <Serial ATA> HA 1 18:58:10 #37 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 00 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000 18:58:10 #38 SectorVerify 20 File Cdrdrv.cpp, Line 12057 Read errors from sector 0 to 14 <Padding> 18:58:19 #39 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 10 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000 18:58:19 #40 SectorVerify 21 File Cdrdrv.cpp, Line 12057 Read error at sector 15 <Virtual Multisession Info> 18:58:19 #41 SectorVerify 20 File Cdrdrv.cpp, Line 12057 Read errors from sector 16 to 18 <Volume Structure Descriptor Sequence> 18:58:28 #42 SPTI -1511 File SCSIPassThrough.cpp, Line 224 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1511) CDB Data: 0x28 00 00 00 00 20 00 00 10 00 Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x3E Sense Qual: 0x02 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02 Buffer x08047340: Len x8000

    Read the article

  • ubuntu 9.10 installer doesn't recognize the hard drive

    - by dan
    I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

    Read the article

  • Xmodmap fails to remap modifier keys

    - by ZyX
    When I try to move keys, so that I have CapsLock on escape, Control on CapsLock and Escape on left control, I get the following error: % xmodmap ~/.Xmodmap X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 15 Current serial number in output stream: 15 That is the code that fails: remove Lock = Caps_Lock ! ESC keycode 9 = Caps_Lock add Lock = Caps_Lock remove Control = Control_L ! CapsLock keycode 66 = Control_L add control = Control_L ! Control_R keycode 37 = Escape ! 2*Meta_L keycode 148 = Meta_L add mod1 = Meta_L If I comment out all lines that start with either add or remove it runs without any errors, but does not do what I want. Program versions (Gentoo x86 (stable)): xorg-server-1.7.6 xmodmap-1.0.4 xf86-input-evdev-2.3.2 Xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Evdev Keyboard" "CoreKeyboard" InputDevice "Evdev Mouse" "CorePointer" EndSection Section "Module" Disable "dri" Disable "dri2" Disable "record" EndSection Section "InputDevice" Identifier "Evdev Keyboard" Driver "evdev" Option "Device" "/dev/input/event2" Option "CoreKeyboard" Option "AutoRepeat" "500 25" Option "XkbRules" "xorg" Option "xkb_rules" "xorg" Option "XkbModel" "yahoo" Option "xkb_model" "yahoo" Option "XkbLayout" "dvp2" # ,ru2 Option "xkb_layout" "dvp2" # ,ru2 # Option "XkbVariant" "" # ,winkeys Option "XkbOption" "grp_led:scroll,grp:rctrl_toggle,compose:rwin,grp:lwin_switch" # grp:lwin_switch EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "CorePointer" Option "Device" "/dev/input/event3" Option "Name" "Genius Ergo Mouse" Option "HWHEELRelativeAxisButtons" "7 6" Option "WHEELRelativeAxizButtons" "4 5" Option "SendCoreEvents" "true" Option "Buttons" "11" EndSection Section "Files" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/terminus" # FontPath "/usr/share/fonts/intlfonts" FontPath "/usr/share/fonts/ttf-bitstream-vera" # FontPath "/usr/share/fonts/ttf" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/paratype" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Section "ServerFlags" # Option "XkbDisable" "false" # Option "AutoAddDevices" "false" Option "DontVTSwitch" "false" Option "DontZap" "false" # Option "DontZoom" "true" EndSection Everything worked before update.

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >