Search Results

Search found 5697 results on 228 pages for 'upgrade advisor'.

Page 28/228 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Upgraded from 11.10 to 12.04 now no network access

  - by MadeTheLeap

  A few weeks ago I decided I should enter the Linux world and read that Ubuntu is the most widely used release. I installed version 11.10 and it worked perfectly. Just this past week I decided I would do the upgrade to 12.04. The upgrade process itself worked fine. However, when I logged in I no longer had a network connection. I am running an AMD-based PC with a D-LINK DFE-530TXS network card and as I said, it worked fine in 11.10. I have scoured the Internet and come across a thousand slightly varying solutions, but they are too convoluted for someone new to Linux. Not because I can't follow the steps, but because most of the tools/utilities that are referenced (e.g. to compile, install, etc.) are not available when I use the stated steps in the solutions. So....should I re-install 11.10 or is there hope in getting this version to use the NIC that I know works. I have the latest driver from d-link for my NIC but I have no idea how to 'install' it for Ubuntu 12.04 to use. I know you will require additional information, but I wasn't sure what you would need. Thanks in advance.

  Read the article

• Kernel Error during upgrade or update commands

  - by Ashesh

  I am getting these errors during sudo apt-get update and upgrade... I tried all possible options no success. I recently upgraded to 13.04 and had problems with Broadcom WiFi. Fixed tat issues using the clean script... but looks like it did not install the Kernel properly.. Here is the o/p of the few scripts I ran: ashesh@ashesh-HPdv4:~$ sudo dpkg -r bcmwl-kernel-source (Reading database ... 175338 files and directories currently installed.) Removing bcmwl-kernel-source ... Removing all DKMS Modules Done. update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-25-generic cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/mtd/mtd.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/mtd/mtd.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/sfc/sfc.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/sfc/sfc.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_core.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/mellanox/mlx4/mlx4_core.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/broadcom/cnic.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/broadcom/cnic.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/qlogic/netxen/netxen_nic.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/qlogic/netxen/netxen_nic.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/brocade/bna/bna.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/net/ethernet/brocade/bna/bna.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/scsi/libfc/libfc.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/scsi/libfc/libfc.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/scsi/advansys.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/scsi/advansys.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/scsi/be2iscsi/be2iscsi.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/scsi/be2iscsi/be2iscsi.ko’: Input/output error cp: reading ‘/lib/modules/3.8.0-25-generic/kernel/drivers/scsi/bnx2i/bnx2i.ko’: Input/output error cp: failed to extend ‘/tmp/mkinitramfs_8gjKwQ//lib/modules/3.8.0-25-generic/kernel/drivers/scsi/bnx2i/bnx2i.ko’: Input/output error Bus error (core dumped) depmod: ../libkmod/libkmod-elf.c:207: elf_get_mem: Assertion `offset < elf->size' failed. Aborted (core dumped) I am not a techie but I need your support to resolve this without re-installation from scratch....

  Read the article

• How to upgrade boost lib using apt-get?

  - by sam

  I use ubuntu 11.04. My boost version: sam@sam:~/code/ros/pcl$ apt-cache showpkg libboost-all-dev Package: libboost-all-dev Versions: 1.42.0.1ubuntu1 (/var/lib/apt/lists/tw.archive.ubuntu.com_ubuntu_dists_natty_universe_binary-amd64_Packages) (/var/lib/dpkg/status) Description Language: File: /var/lib/apt/lists/tw.archive.ubuntu.com_ubuntu_dists_natty_universe_binary-amd64_Packages MD5: 72efad05a3c79394c125b79e1d4eb3a7 Reverse Depends: libvtk5-dev,libboost-all-dev libfeel++-dev,libboost-all-dev Dependencies: 1.42.0.1ubuntu1 - libboost-dev (0 (null)) libboost-date-time-dev (0 (null)) libboost-filesystem-dev (0 (null)) libboost-graph-dev (0 (null)) libboost-iostreams-dev (0 (null)) libboost-math-dev (0 (null)) libboost-program-options-dev (0 (null)) libboost-python-dev (0 (null)) libboost-regex-dev (0 (null)) libboost-serialization-dev (0 (null)) libboost-signals-dev (0 (null)) libboost-system-dev (0 (null)) libboost-test-dev (0 (null)) libboost-thread-dev (0 (null)) libboost-wave-dev (0 (null)) Provides: 1.42.0.1ubuntu1 - Reverse Provides: sam@sam:~/code/ros/pcl$ How to upgrade boost to 1.44+ by using apt tools? Thank you~ When I run apt-add-repository,it shows: sam@sam:~/code/ros/pcl$ sudo apt-add-repository ppa:timklingt/ppa Error reading https://launchpad.net/api/1.0/~timklingt/+archive/ppa: GnuTLS recv error (-9): A TLS packet with unexpected length was received. sam@sam:~/code/ros/pcl$ How to fix it? Thank you~ I try to install libboost1.46-all-dev: sam@sam:~/code/ros/pcl$ sudo apt-get install libboost1.46-all-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libboost1.46-all-dev : Depends: libboost1.46-dev but it is not going to be installed Depends: libboost-date-time1.46-dev but it is not going to be installed Depends: libboost-filesystem1.46-dev but it is not going to be installed Depends: libboost-graph1.46-dev but it is not going to be installed Depends: libboost-iostreams1.46-dev but it is not going to be installed Depends: libboost-math1.46-dev but it is not going to be installed Depends: libboost-program-options1.46-dev but it is not going to be installed Depends: libboost-python1.46-dev but it is not going to be installed Depends: libboost-regex1.46-dev but it is not going to be installed Depends: libboost-serialization1.46-dev but it is not going to be installed Depends: libboost-signals1.46-dev but it is not going to be installed Depends: libboost-system1.46-dev but it is not going to be installed Depends: libboost-test1.46-dev but it is not going to be installed Depends: libboost-thread1.46-dev but it is not going to be installed Depends: libboost-wave1.46-dev but it is not going to be installed E: Broken packages sam@sam:~/code/ros/pcl$ What's these error means? And how to solve it? Thank you~

  Read the article

• apt-get fails to upgrade, install, remove etc

  - by Kieran Peat

  I upgraded from 11.10 to 12.04, had no issues that I noticed. Recently tried to install something via software center, but it was throwing errors. Changed to trying to sudo apt-get install instead but again no luck. I've genuinely tried as much as I know to fix this, but I can't so I figured I'd ask here. I've done sudo apt-get update successfully but sudo apt-get upgrade failed with... You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not installed libqt4-dbus:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-declarative:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-designer:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-network:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-opengl:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-qt3support:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-script:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-scripttools:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-sql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-sql-mysql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-svg:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-test:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-xml:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqt4-xmlpatterns:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqtgui4:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not installed libqtwebkit4:i386 : Depends: libqtcore4:i386 (>= 4:4.8.0~) but it is not installed libssl1.0.0 : Breaks: libssl1.0.0:i386 (!= 1.0.1-4ubuntu5.2) but 1.0.0e-2ubuntu4.6 is installed libssl1.0.0:i386 : Breaks: libssl1.0.0 (!= 1.0.0e-2ubuntu4.6) but 1.0.1-4ubuntu5.2 is installed E: Unmet dependencies. Try using -f. Using sudo apt-get -f install... The following packages were automatically installed and are no longer required: libgtkmm-2.4-1c2a libgtkhtml3.14-19 libglade2-0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libqtcore4:i386 libssl1.0.0:i386 The following NEW packages will be installed libqtcore4:i386 The following packages will be upgraded: libssl1.0.0:i386 1 upgraded, 1 newly installed, 0 to remove and 33 not upgraded. 20 not fully installed or removed. Need to get 0 B/3,063 kB of archives. After this operation, 9,044 kB of additional disk space will be used. Do you want to continue [Y/n]? y E: Internal Error, No file name for libssl1.0.0 I've tried sudo apt-get remove libssl1.0.0 and sudo apt-get remove libssl1.0.0:i386 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not going to be installed Depends: libssl1.0.0:i386 but it is not going to be installed libcurl3:i386 : Depends: libssl1.0.0:i386 (>= 1.0.0) but it is not going to be installed libqt4-dbus:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-declarative:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-designer:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-network:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-opengl:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-qt3support:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-script:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-scripttools:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-sql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-sql-mysql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-svg:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-test:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-xml:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-xmlpatterns:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqtgui4:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqtwebkit4:i386 : Depends: libqtcore4:i386 (>= 4:4.8.0~) but it is not going to be installed libsasl2-modules:i386 : Depends: libssl1.0.0:i386 (>= 1.0.0) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). I've also tried sudo apt-get dist-upgrade, sudo apt-get autoremove etc without any luck. I also tried to download the .deb and use dpkg -i, but that failed and did not fully understand the method to be honest. Edit This is in response to the comments ref: sudo apt-get install -f doesn't fix broken packages. And now? sudo dpkg --configure -a --force-all dpkg: error processing libssl1.0.0 (--configure): libssl1.0.0:amd64 1.0.1-4ubuntu5.2 cannot be configured because libssl1.0.0:i386 is in a different version (1.0.0e-2ubuntu4.6) dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: also configuring `libssl1.0.0:i386' (required by `ia32-libs-multiarch:i386') dpkg: error processing libssl1.0.0:i386 (--configure): libssl1.0.0:i386 1.0.0e-2ubuntu4.6 cannot be configured because libssl1.0.0:amd64 is in a different version (1.0.1-4ubuntu5.2) dpkg: too many errors, stopping Errors were encountered while processing: libssl1.0.0 libssl1.0.0:i386 ... libssl1.0.0:i386 Processing was halted because there were too many errors. Ref: Package manager doesn't work anymore moving /var/lib/kpkg/info/libssl.. kieran@kieran-EX58-UD3R:~$ sudo mv /var/lib/dpkg/info/libssl1.0.0:i386.postinst /var/lib/dpkg/info/libssl1.0.0:i386.postinst.bad kieran@kieran-EX58-UD3R:~$ sudo mv /var/lib/dpkg/info/libssl1.0.0:amd64.postinst /var/lib/dpkg/info/libssl1.0.0:amd64.postinst.bad kieran@kieran-EX58-UD3R:~$ sudo apt-get --reinstall install libssl Reading package lists... Done Building dependency tree Reading state information... Done Package libssl is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'libssl' has no installation candidate kieran@kieran-EX58-UD3R:~$ sudo apt-get --reinstall install libssl1.0.0 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not going to be installed libqt4-dbus:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-declarative:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-designer:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-network:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-opengl:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-qt3support:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-script:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-scripttools:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-sql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-sql-mysql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-svg:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-test:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-xml:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-xmlpatterns:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqtgui4:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqtwebkit4:i386 : Depends: libqtcore4:i386 (>= 4:4.8.0~) but it is not going to be installed libssl1.0.0 : Breaks: libssl1.0.0:i386 (!= 1.0.1-4ubuntu5.2) but 1.0.0e-2ubuntu4.6 is to be installed libssl1.0.0:i386 : Breaks: libssl1.0.0 (!= 1.0.0e-2ubuntu4.6) but 1.0.1-4ubuntu5.2 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). kieran@kieran-EX58-UD3R:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libgtkmm-2.4-1c2a libgtkhtml3.14-19 libglade2-0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libqtcore4:i386 libssl1.0.0:i386 The following NEW packages will be installed libqtcore4:i386 The following packages will be upgraded: libssl1.0.0:i386 1 upgraded, 1 newly installed, 0 to remove and 58 not upgraded. 20 not fully installed or removed. Need to get 3,063 kB of archives. After this operation, 9,044 kB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libssl1.0.0 i386 1.0.1-4ubuntu5.2 [1,002 kB] Get:2 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libqtcore4 i386 4:4.8.1-0ubuntu4.1 [2,061 kB] Fetched 3,063 kB in 4s (731 kB/s) E: Internal Error, No file name for libssl1.0.0 ref: libssl Dependencies removing libssl1.0.0:i386 kieran@kieran-EX58-UD3R:~$ sudo apt-get remove libssl1.0.0:i386 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies. ia32-libs-multiarch:i386 : Depends: libqtcore4:i386 but it is not going to be installed Depends: libssl1.0.0:i386 but it is not going to be installed libcurl3:i386 : Depends: libssl1.0.0:i386 (>= 1.0.0) but it is not going to be installed libqt4-dbus:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-declarative:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-designer:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-network:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-opengl:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-qt3support:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-script:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-scripttools:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-sql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-sql-mysql:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-svg:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-test:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-xml:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqt4-xmlpatterns:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqtgui4:i386 : Depends: libqtcore4:i386 (= 4:4.8.1-0ubuntu4.1) but it is not going to be installed libqtwebkit4:i386 : Depends: libqtcore4:i386 (>= 4:4.8.0~) but it is not going to be installed libsasl2-modules:i386 : Depends: libssl1.0.0:i386 (>= 1.0.0) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

  Read the article

• Forms&Reports upgrade characterset issues

  - by Lukasz Romaszewski

  Hello,This quick post is based on my findings during recent IMC workshops, especially those related to upgrading the Forms 6i/9i/10g applications to Forms 11g platform. The upgrade process itself is pretty straightforward and it basically requires recompiling your Forms application with a latest version of frmcmp tool. For some cases though, especially when you migrate from Forms 6i which is a client-server architecture to a 3-tier web solution (Forms 11g), you need to rewrite some parts of your code to make it run on new platform. The things you need to change range from reimplementing (using webutil library) typical client-site functionality like local IO operation, access to WinAPI, invoking DLLs etc. to changing deprecated or obsolete APIs like RUN_PRODUCT to RUN_REPORT_OBJECT. To automate those changes Oracle provides complete Java API  which allows you to manipulate the code and structure of you modules (JDAPI). To make it even easier we can use Forms Migration Assistant tool (written in Java using JDAPI) which is able to replace all occurrences of old API entries with their 11g equivalents or warn you when the replacement is not possible. You can also add your own replacement definitions in the search_replace.properties file. But you need to be aware of some issues that can be encountered using this tool. First of all if you are using some hard-coded text inside your triggers you may notice that after processing them by the Migration Assistant tool the national characters may be lost. This is due to the fact that you need to explicitly tell Java application (which MA really is) what kind of characterset it should use to read those text properly. In order to do that just add to a script calling MA the following line:  export JAVA_TOOL_OPTIONS=-Dfile.encoding=<JAVA_ISO_ENCODING>  when the particular encoding must match the NLS_LANG in your Forms Builder environment (for example for Polish characterset you need to use ISO-8859-2).Second issue you can encounter related to national charactersets is lack of national symbols in you reports after migration. This can be solved by adding appropriate NLS_LANG entry in your reports environment. Sometimes instead of particular characterset you see "Greek characters" in your reports. This is just default font used by reports engine instead of the one defined in your report. To solve it you must copy fonts definitions from your old environment (e.g. Forms 10g installation) to appropriate directory in new installation (usually AFM folder). For more information about this and other issues please refer to https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=1297012.1at My Oracle Support site. That's all for today, stay tuned for more posts on this topic! Lukasz

  Read the article

• iscsitarget suddenly broken after upgrade of the 12.04 Hardware Stack

  - by RapidWebs

  After an upgrade to the latest Hardware Stack using Ubuntu 12.04, my iscsi service is not longer operational. The error from the service is such: FATAL: Module iscsi_trgt not found. I have learned that I might need to reinstall the package iscsitarget-dkms. this package builds a driver or something during installation, from source. During this build process, it reports and error, and now has also broke my package manager. Here is the relevant output: Building module: cleaning build area.... make KERNELRELEASE=3.13.0-34-generic -C /lib/modules/3.13.0-34-generic/build M=/var/lib/dkms/iscsitarget/1.4.20.2/build........(bad exit status: 2) Error! Bad return status for module build on kernel: 3.13.0-34-generic (i686) Consult /var/lib/dkms/iscsitarget/1.4.20.2/build/make.log for more information. Errors were encountered while processing: iscsitarget E: Sub-process /usr/bin/dpkg returned an error code (1) and this is the information provided by make.log: or iscsitarget-1.4.20.2 for kernel 3.13.0-34-generic (i686) Fri Aug 15 22:07:15 EDT 2014 make: Entering directory /usr/src/linux-headers-3.13.0-34-generic LD /var/lib/dkms/iscsitarget/1.4.20.2/build/built-in.o LD /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/built-in.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/tio.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/iscsi.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/nthread.o CC [M] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.o /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c: In function ‘worker_thread’: /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:73:28: error: void value not ignored as it ought to be /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:74:3: error: implicit declaration of function ‘get_io_context’ [-Werror=implicit-function-declaration] /var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.c:74:21: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors make[2]: * [/var/lib/dkms/iscsitarget/1.4.20.2/build/kernel/wthread.o] Error 1 make[1]: * [/var/lib/dkms/iscsitarget/1.4.20.2/build/kernel] Error 2 make: * [module/var/lib/dkms/iscsitarget/1.4.20.2/build] Error 2 make: Leaving directory `/usr/src/linux-headers-3.13.0-34-generic' I am at a loss on how to resolve this issue. any help would be appreciated!

  Read the article

• Cross Theaded Calls - Many controls Heavy GUI Application after .net 1.1 2.0 upgrade- best way ??

  - by keepsmilinyaar

  I have recently upgraded a .net1.1 solution to .net2.0. AS this is a very heavy GUI appilcation with loads of controls and many multithreaded operations that update the GUI. While these operations worked seamlessly in .net1.1 it is throwing up Cross Threaded Illegal operations after the upgrade. Considering the fact that tehre are numerous grids, buttons and status labels that need to be updated via these multi threaded operations, I decided to code for checking the InvokeRequired solution, however doing that for every control would probably not be the best way to go about it. I was wondering if you could suggest a better way of how I can go about it or propose any OOPS based class structure that I could code around to make the code look better. Please do let me know if my question is unclear. Thanks in advance

  Read the article

• Drupal: how to upgrade a running production website to a dev version?

  - by FractalizeR

  Can you help me to understand, how do I do Drupal website deployment and development? Suppose, I developed 1.0 version of Berty&Frank website. I copied everything to their production server and it is alive and kicking now. Site is already full of contents and is growing. I am asked to add additional features to the website. I am now experimenting with the way how I can implement them in a dev version. I am creating/deleting content types, fill created nodes with demo data just to see how they look like etc. Now I found the way and I want to upgrade production website to the same structure as my dev version now. How do I do that? Is the only way to manually make every change I made in dev version?

  Read the article

• Upgrade to 4.0 Framework, then downgraded, now can't find Linq namespace?

  - by CubanX

  I just upgraded from VS2008 to VS2010. In the process, I allowed it to upgrade my DLL's to 4.0. I've decided that wasn't a good idea and now I've rolled back. It all works fine in VS2010, but when it hits my CI server (CruiseControl.Net), I get an error of: The type or namespace name 'Linq' does not exist in the namespace 'System' (are you missing an assembly reference? 3.5 is on the server, and other projects that use 3.5 build fine, so I don't think it's a framework issue. Anyone have any hints?

  Read the article

• Can't build gcc anymore since upgrade to 11.10

  - by Raphael R.

  On Monday I've upgraded to from Ubuntu 11.04 (my initial installation) to 11.10 and now I can't build gcc from source anymore. Since I forgot to uninstall the gcc package before the upgrade, Ubuntu replaced my 4.7.0 compiler with it's stable 4.6.1. So I tried to build the SVN sources again, but it fails. I've most recently tried it with SVN revision 180193. After some time, the build fails with the following message: /home/raphael/devel/gcc/build/./gcc/xgcc -B/home/raphael/devel/gcc/build/./gcc/ -B/usr/i686-pc-linux-gnu/bin/ -B/usr/i686-pc-linux-gnu/lib/ -isystem /usr/i686-pc-linux-gnu/include -isystem /usr/i686-pc-linux-gnu/sys-include -g -O2 -O2 -I. -I. -I../../src/gcc -I../../src/gcc/. -I../../src/gcc/../include -I../../src/gcc/../libdecnumber -I../../src/gcc/../libdecnumber/bid -I../libdecnumber -I../../src/gcc/../libgcc -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -isystem ./include -fPIC -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -fbuilding-libgcc -fno-stack-protector -I. -I. -I../.././gcc -I../../../src/libgcc -I../../../src/libgcc/. -I../../../src/libgcc/../gcc -I../../../src/libgcc/../include -I../../../src/libgcc/config/libbid -DENABLE_DECIMAL_BID_FORMAT -DHAVE_CC_TLS -DUSE_TLS -o _ashldi3.o -MT _ashldi3.o -MD -MP -MF _ashldi3.dep -DL_ashldi3 -c ../../../src/libgcc/../gcc/libgcc2.c \ -fvisibility=hidden -DHIDE_EXPORTS In file included from /usr/include/stdio.h:28:0, from ../../../src/libgcc/../gcc/tsystem.h:88, from ../../../src/libgcc/../gcc/libgcc2.c:29: /usr/include/features.h:323:26: fatal error: bits/predefs.h: File or directory not found. I've cofigured it with: ~/devel/gcc/build$ ../src/configure --prefix=/usr --enable-languages=c++ And make it with: ~/devel/gcc/build$ make -j4 Just to be sure, I did a rm -rf * in the build directory in case there's some broken stuff inside. Didn't help, though. That's the backstory. I tried to fix it and searched for the bits/predefs.h. It's inside /usr/include/i386-linux-gnu. I temporarily fixed the problem by doing ~/devel/gcc/build$ C_INCLUDE_PATH=/usr/include/i386-linux-gnu make -j4 Which is only temporary because now gcc complains that it can't find crti.o. Which i can find in /usr/lib/i386-linux-gnu. Now i could also set C_LIBRARY_PATH - actually it doesn't work - but I feel like I'm fighting the system here. Also, even if it succeeds, my newly built compiler would also not know about the i386-linux-gnu stuff. So I would have to set C_LIBRARY_PATH and C_INCLUDE_PATH before every build of every project I have. I could add it to my .bashrc but that subverts the system even more. So, how do I tell the build process: That there are additional include/lib directories, and That it should build a gcc which respects them too? Edit: I forgot to include the command which causes the above error message. Also I can think of another solution: Copy the stuff from /usr/include/i386-linux-gnu to /usr/include (same thing for /usr/lib/i386-linux-gnu to /usr/lib). But that doesn't feel right, either. Finally, the system's gcc 4.6.1 can compile other applications just fine, except mine, which use C++11 features not present in the 4.6 series.

  Read the article

• Performing an upgrade from TFS 2008 to TFS 2010

  - by Enrique Lima

  I recently had to go through the process of migrating a TFS 2008 SP1 to a TFS 2010 environment. I will go into the details of the tasks that I went through, but first I want to explain why I define it as a migration and not an upgrade. When this environment was setup, based on support and limitations for TFS 2008, we used a 32 bit platform for the TFS Application Tier and Build Servers.  The Data Tier, since we were installing SP1 for TFS 2008, was done as a 64 bit installation.  We knew at that point that TFS 2010 was in the picture so that served as further motivation to make that a 64bit install of SQL Server.  The SQL Server at that point was a single instance (Default) installation too.  We had a pretty good strategy in place for backups of the databases supporting the environment (and this made the migration so much smoother), so we were pretty familiar with the databases and the purpose they serve. I am sure many of you that have gone through a TFS 2008 installation have encountered challenges and trials.  And likely even more so if you, like me, needed to configure your deployment for SSL.  So, frankly I was a little concerned about the process of migrating.  They say practice makes perfect, and this environment I worked on is in some way my brain child, so I was not ready nor willing for this to be a failure or something that would impact my client’s work. Prior to going through the migration process, we did the install of the environment.  The Data Tier was the same, with a new Named instance in place to host the 2010 install.  The Application Tier was in place too, and we did the DefaultCollection configuration to test and validate all components were in place as they should. Anyway, on to the tasks for the migration (thanks to Martin Hinselwood for his very thorough documentation): Close access to TFS 2008, you want to make sure all code is checked in and ready to go.  We stated a difference of 8 hours between code lock and the start of migration to give time for any unexpected delay.  How do we close access?  Stop IIS. Backup your databases.  Which ones? TfsActivityLogging TfsBuild TfsIntegration TfsVersionControl TfsWorkItemTracking TfsWorkItemTrackingAttachments Restore the databases to the new Named Instance (make sure you keep the same names) Now comes the fun part! The actual import/migration of the databases.  A couple of things happen here. The TfsIntegration database will be scanned, the other databases will be checked to validate they exist.  Those databases will go through a process of data being extracted and transferred to the TfsVersionControl database to then be renamed to Tfs_<Collection>. You will be using a tool called tfsconfig and the option import. This tool is located in the TFS 2010 installation path (C:\Program Files\Microsoft Team Foundation Server 2010\Tools),  the command to use is as follows:    tfsconfig import /sqlinstance:<instance> /collectionName:<name> /confirmed Where <instance> is going to be the SQL Server instance where you restored the databases to.  <name> is the name you will give the collection. And to explain /confirmed, well this means you have done a backup of the databases, why?  well remember you are going to merge the databases you restored when you execute the tfsconfig import command. The process will go through about 200 tasks, once it completes go to Team Foundation Server Administration Console and validate your imported databases and contents. We’ll keep this manageable, so the next post is about how to complete that implementation with the SSL configuration.

  Read the article

• WebLogic How-to Videos: Install, Upgrade, & Patch

  - by Ruma Sanyal

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here is another great YouTube video by our product manager Monica Riccelli. She talks about installers now being standardized in Oracle for greater consistency -- no more WebLogic native installers. Also, JDK is no longer a part of the WebLogic install. The various installers she discusses include OUI, ZIP, OEPE, Coherence and more. Monica then takes us through a step by step install process. After the install process is complete the video takes us through the configuration wizard. The ZIP installer is then discussed and its effectiveness, such as it being the smallest downloadable option, easy, and very popular with our customers and limitations (such as for development only and not to be used in production) highlighted. Monica then takes us through the configuration wizard, its usage, and when to use WLST scripts. The video then discusses NodeManager and its usage and discusses how to reconfigure a WebLogic domain on upgrade – through our GUI tools or through command line interface. Lastly, it highlights Opatch – a patch application tool used by our customers and standardized across all Oracle products. Really detailed video. Check it out!  /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Upgrade Debian to unstable on VirtualBox: udev problem

  - by Ken

  I'm running Debian stable on VirtualBox on Windows Vista 64-bit Ultimate. It's been running great, but I needed some newer packages, so I put sid in my sources.list to upgrade to unstable (as I've done a dozen times on various Linux boxes over the years). When I upgraded, something went screwy and it asked me to run apt-get -f install to fix them, which gave this: (Reading database ... 77846 files and directories currently installed.) Preparing to replace udev 0.125-7+lenny3 (using .../archives/udev_151-3_amd64.deb) ... Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel. Please upgrade your kernel before or while upgrading udev. AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you understand what you are doing! dpkg: error processing /var/cache/apt/archives/udev_151-3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 insserv: warning: current start runlevel(s) (2 3 4 5) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current stop runlevel(s) (0 1 6) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current start runlevel(s) (2 3 4 5) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current stop runlevel(s) (0 1 6) of script `vboxadd-x11' overwrites defaults (empty). Errors were encountered while processing: /var/cache/apt/archives/udev_151-3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I have the VirtualBox extensions installed, and it looks like the udev install doesn't know what to make of them. But I don't know exactly where/how they're installed (I just ran the VBoxLinuxAdditions-amd64.run script, basically), so I don't know how to disable them. Any ideas? Thanks!

  Read the article

• Shoretel Upgrade Path

  - by Brian

  I currently have a Shoretel Server running Server 2003 x32 as a virtual machine paired with a ShoreGear 90 switch and another unused switch of the same model being reserved for manual failover. I am getting the software mailed to me from my partner, but with limited support since the server is in a relatively remote area. I am tempted to upgrade the OS at the same time as performing the upgrade, but want to know if there are any horror stories or advice I should know about before diving in. I'm upgrading from Shoretel 9.2 Build. I will be upgrading first to version 10.1 then finally to 11.1. The system has been bullet proof since it was installed and we are upgrading mainly to get a client that is a little more modern. My question boils down to: Should I even bother with an OS upgrade or even possibly a fresh install of Windows with an install of Shoretel 11.1 and just transfer the configuration? Should I just stay with Server 2003 since it is supported in my target version of Shoretel and the upgrade will be more than enough to keep me busy as a novice?

  Read the article

• UPK Customer Success Story: The City and County of San Francisco

  - by karen.rihs(at)oracle.com

  The value of UPK during an upgrade is a hot topic and was a primary focus during our latest customer roundtable featuring The City and County of San Francisco: Leveraging UPK to Accelerate Your PeopleSoft Upgrade. As the Change Management Analyst for their PeopleSoft 9.0 HCM project (Project eMerge), Jan Crosbie-Taylor provided a unique perspective on how they're utilizing UPK and UPK pre-built content early on to successfully manage change for thousands of city and county employees and retirees as they move to this new release. With the first phase of the project going live next September, it's important to the City and County of San Francisco to 1) ensure that the various constituents are brought along with the project team, and 2) focus on the end user aspects of the implementation, including training. Here are some highlights on how UPK and UPK pre-built content are helping them accomplish this: As a former documentation manager, Jan really appreciates the power of UPK as a single source content creation tool. It saves them time by streamlining the documentation creation process, enabling them to record content once, then repurpose it multiple times. With regard to change management, UPK has enabled them to educate the project team and gain critical buy in and support by familiarizing users with the application early on through User Experience Workshops and by promoting UPK at meetings whenever possible. UPK has helped create awareness for the project, making the project real to users. They are taking advantage of UPK pre-built content to: Educate the project team and subject matter experts on how PeopleSoft 9.0 works as delivered Create a guide/storyboard for their own recording Save time/effort and create consistency by enhancing their recorded content with text and conceptual information from the pre-built content Create PeopleSoft Help for their development databases by publishing and integrating the UPK pre-built content into the application help menu Look ahead to the next release of PeopleTools, comparing the differences to help the team evaluate which version to use with their implemtentation When it comes time for training, they will be utilizing UPK in the classroom, eliminating the time and cost of maintaining training databases. Instructors will be able to carry all training content on a thumb drive, allowing them to easily provide consistent training at their many locations, regardless of the environment. Post go-live, they will deploy the same UPK content to provide just-in-time, in-application support for the entire system via the PeopleSoft Help menu and their PeopleSoft Enterprise Portal. Users will already be comfortable with UPK as a source of help, having been exposed to it during classroom training. They are also using UPK for a non-Oracle application called JobAps, an online job application solution used by many government organizations. Jan found UPK's object recognition to be excellent, yet it's been incredibly easy for her to change text or a field name if needed. Please take time to listen to this recording. The City and County of San Francisco's UPK story is very exciting, and Jan shared so many great examples of how they're taking advantage of UPK and UPK pre-built content early on in their project. We hope others will be able to incorporate these into their projects. Many thanks to Jan for taking the time to share her experiences and creative uses of UPK with us! - Karen Rihs, Oracle UPK Outbound Product Management

  Read the article

• Stuck on preserving config file in WIX major upgrade!

  - by Joshua

  ARGH! Wix is driving me crazy. So, of course I have seen the many posts both here on stackoverflow and elsewhere about WiX and major upgrades. I inherited this software project using WiX and am releasing a new version. I need this new version to leave ONLY the one configuration file if it's present, and replace everything else. This installer works EXCEPT no matter what I have done so far, the new XML file replaces the old on every install. Even attempting to use NeverOverwrite="yes" and even trying and messing back and forth with OnlyDetect="no"! I am simply stuck and humbly request a little guidance. The file that needs to be preserved is called SETTINGS.XML and is in the All Users-ApplicationData directory. Here is (most of) my .wxs file! <Package Id='$(var.PackageCode)' Description="Pathways Directory Software" InstallerVersion="301" Compressed="yes" /> <WixVariable Id="WixUILicenseRtf" Value="License.rtf" /> <Media Id="1" Cabinet="Pathways.cab" EmbedCab="yes" /> <Upgrade Id="$(var.UpgradeCode)"> <UpgradeVersion OnlyDetect="no" Maximum="$(var.ProductVersion)" IncludeMaximum="no" Language="1033" Property="OLDAPPFOUND" /> <UpgradeVersion Minimum="$(var.ProductVersion)" IncludeMinimum="yes" OnlyDetect="no" Language="1033" Property="NEWAPPFOUND" /> </Upgrade> <!-- program files directory --> <Directory Id="ProgramFilesFolder"> <Directory Id="INSTALLDIR" Name="Pathways"/> </Directory> <!-- application data directory --> <Directory Id="CommonAppDataFolder" Name="CommonAppData"> <Directory Id="CommonAppDataPathways" Name="Pathways" /> </Directory> <!-- start menu program directory --> <Directory Id="ProgramMenuFolder"> <Directory Id="ProgramsMenuPathwaysFolder" Name="Pathways" /> </Directory> <!-- desktop directory --> <Directory Id="DesktopFolder" /> </Directory> <Icon Id="PathwaysIcon" SourceFile="\\Fileserver\Release\Pathways\Latest\Release\Pathways.exe" /> <!-- components in the reference to the install directory --> <DirectoryRef Id="INSTALLDIR"> <Component Id="Application" Guid="EEE4EB55-A515-4872-A4A5-06D6AB4A06A6"> <File Id="pathwaysExe" Name="Pathways.exe" DiskId="1" Source="\\Fileserver\Release\Pathways\Latest\Release\Pathways.exe" Vital="yes" KeyPath="yes" Assembly=".net" AssemblyApplication="pathwaysExe" AssemblyManifest="pathwaysExe"> <!--<netfx:NativeImage Id="ngen_Pathways.exe" Platform="32bit" Priority="2"/> --> </File> <File Id="pathwaysChm" Name="Pathways.chm" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\Pathways.chm" /> <File Id="publicKeyXml" ShortName="RSAPUBLI.XML" Name="RSAPublicKey.xml" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\RSAPublicKey.xml" Vital="yes" /> <File Id="staticListsXml" ShortName="STATICLI.XML" Name="StaticLists.xml" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\StaticLists.xml" Vital="yes" /> <File Id="axInteropMapPointDll" ShortName="AXMPOINT.DLL" Name="AxInterop.MapPoint.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\AxInterop.MapPoint.dll" Vital="yes" /> <File Id="interopMapPointDll" ShortName="INMPOINT.DLL" Name="Interop.MapPoint.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\Interop.MapPoint.dll" Vital="yes" /> <File Id="mapPointDll" ShortName="MAPPOINT.DLL" Name="MapPoint.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\Interop.MapPoint.dll" Vital="yes" /> <File Id="devExpressData63Dll" ShortName="DAAT63.DLL" Name="DevExpress.Data.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.Data.v6.3.dll" Vital="yes" /> <File Id="devExpressUtils63Dll" ShortName="UTILS63.DLL" Name="DevExpress.Utils.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.Utils.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraBars63Dll" ShortName="BARS63.DLL" Name="DevExpress.XtraBars.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraBars.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraNavBar63Dll" ShortName="NAVBAR63.DLL" Name="DevExpress.XtraNavBar.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraNavBar.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraCharts63Dll" ShortName="CHARTS63.DLL" Name="DevExpress.XtraCharts.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraCharts.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraEditors63Dll" ShortName="EDITOR63.DLL" Name="DevExpress.XtraEditors.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraEditors.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraPrinting63Dll" ShortName="PRINT63.DLL" Name="DevExpress.XtraPrinting.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraPrinting.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraReports63Dll" ShortName="REPORT63.DLL" Name="DevExpress.XtraReports.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraReports.v6.3.dll" Vital="yes" /> <File Id="devExpressXtraRichTextEdit63Dll" ShortName="RICHTE63.DLL" Name="DevExpress.XtraRichTextEdit.v6.3.dll" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\DevExpress.XtraRichTextEdit.v6.3.dll" Vital="yes" /> <RegistryValue Id="PathwaysInstallDir" Root="HKLM" Key="Software\Tribal Data Resources\Pathways" Name="InstallDir" Action="write" Type="string" Value="[INSTALLDIR]" /> </Component> </DirectoryRef> <!-- application data components --> <DirectoryRef Id="CommonAppDataPathways"> <Component Id="CommonAppDataPathwaysFolderComponent" Guid="087C6F14-E87E-4B57-A7FA-C03FC8488E0D"> <CreateFolder> <Permission User="Everyone" GenericAll="yes" /> </CreateFolder> <RemoveFolder Id="CommonAppDataPathways" On="uninstall" /> <RegistryValue Root="HKCU" Key="Software\TDR\Pathways" Name="installed" Type="integer" Value="1" KeyPath="yes" /> <File Id="settingsXml" ShortName="SETTINGS.XML" Name="Settings.xml" DiskId="1" Source="\\fileserver\Release\Pathways\Dependencies\Settings\settings.xml" Vital="yes" /> </Component> <Component Id="Database" Guid="1D8756EF-FD6C-49BC-8400-299492E8C65D"> <File Id="pathwaysMdf" Name="Pathways.mdf" DiskId="1" Source="\\fileserver\Shared\Databases\Pathways\SystemDBs\Pathways.mdf" /> <RemoveFile Id="pathwaysLdf" ShortName="Pathways.ldf" Name="Pathways_log.LDF" On="uninstall" /> </Component> </DirectoryRef> <!-- shortcut components --> <DirectoryRef Id="DesktopFolder"> <Component Id="DesktopShortcutComponent" Guid="1BF412BA-9C6B-460D-80ED-8388AC66703F"> <Shortcut Id="DesktopShortcut" Target="[INSTALLDIR]Pathways.exe" Name="Pathways" Description="Pathways Tribal Directory" Icon="PathwaysIcon" Show="normal" WorkingDirectory="INSTALLDIR" /> <RegistryValue Root="HKCU" Key="Software\TDR\Pathways" Name="installed" Type="integer" Value="1" KeyPath="yes"/> </Component> </DirectoryRef> <DirectoryRef Id ="ProgramsMenuPathwaysFolder"> <Component Id="ProgramsMenuShortcutComponent" Guid="83A18245-4C22-4CDC-94E0-B480F80A407D"> <Shortcut Id="ProgramsMenuShortcut" Target="[INSTALLDIR]Pathways.exe" Name="Pathways" Icon="PathwaysIcon" Show="normal" WorkingDirectory="INSTALLDIR" /> <RemoveFolder Id="ProgramsMenuPathwaysFolder" On="uninstall"/> <RegistryValue Root="HKCU" Key="Software\TDR\Pathways" Name="installed" Type="integer" Value="1" KeyPath="yes"/> </Component> </DirectoryRef> <Feature Id="App" Title="Pathways Application" Level="1" Description="Pathways software" Display="expand" ConfigurableDirectory="INSTALLDIR" Absent="disallow" AllowAdvertise="no" InstallDefault="local"> <ComponentRef Id="Application" /> <ComponentRef Id="CommonAppDataPathwaysFolderComponent" /> <ComponentRef Id="ProgramsMenuShortcutComponent" /> <Feature Id="Shortcuts" Title="Desktop Shortcut" Level="1" Absent="allow" AllowAdvertise="no" InstallDefault="local"> <ComponentRef Id="DesktopShortcutComponent" /> </Feature> </Feature> <Feature Id="Data" Title="Database" Level="1" Absent="allow" AllowAdvertise="no" InstallDefault="local"> <ComponentRef Id="Database" /> </Feature> <!-- <UIRef Id="WixUI_Minimal" /> --> <UIRef Id ="WixUI_FeatureTree"/> <UIRef Id="WixUI_ErrorProgressText"/> <UI> <Error Id="2000">There is a later version of this program installed.</Error> </UI> <CustomAction Id="NewerVersionDetected" Error="2000" /> <InstallExecuteSequence> <RemoveExistingProducts After="InstallFinalize"/> </InstallExecuteSequence> </Product>

  Read the article

• Upgrading to Ubuntu 11.04 failed

  - by Rupert

  Today Ubuntu asked me to upgrade to 11.04. The installation went completely fine until right at the end when the following packages failed: install-info ubuntu-standard The installer hung so I had to shut it down manually. Ubuntu still works fine but it says that the upgrade didn't work properly so I am hesitant to restart it until I have resolved the problem in case I can't get back in. I am running Ubuntu inside the latest version of Virtual Box and was previously running version 10.10. I have tried installing install-info manually with apt-get but I get the following error: Unhandled exception: [#<SystemStackError: stack level too deep>] /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:842:in `block in <class:Autotest>': undefined method `backtrace' for [#<SystemStackError: stack level too deep>]:Array (NoMethodError) from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `[]' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `block in hook' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `each' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `any?' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:828:in `hook' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:344:in `rescue in run' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:320:in `run' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/lib/autotest.rb:241:in `run' from /usr/local/ruby/lib/ruby/gems/1.9.1/gems/ZenTest-4.5.0/bin/autotest:6:in `<top (required)>' from /usr/local/ruby/bin/autotest:19:in `load' from /usr/local/ruby/bin/autotest:19:in `<main>' dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of info: info depends on install-info; however: Package install-info is not configured yet. dpkg: error processing info (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of ubuntu-standard: ubuntu-standard depends on info; however: Package info is not configured yet. dpkg: error processing ubuntu-standard (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: install-info info ubuntu-standard E: Sub-process /usr/bin/dpkg returned an error code (1) Any ideas on what I should try next?

  Read the article

• Error message during update from 13.04 to 13.10

  - by layonhands

  The following was reported after I attempted to report the problem back to Ubuntu: The problem cannot be reported: You have some obsolete package versions installed. Please upgrade the following packages and check if the problem still occurs: ubuntu-release-upgrader-gtk, apport, apport-gtk, apport-symptoms, apt, apt-utils, at-spi2-core, binutils, dbus, gcc-4.7-base, gdb, gir1.2-atk-1.0, gir1.2-gtk-3.0, glib-networking, glib-networking-common, glib-networking-services, gnupg, gpgv, ifupdown, initramfs-tools, initramfs-tools-bin, kmod, libappindicator3-1, libapt-inst1.5, libapt-pkg4.12, libasound2, libatk-bridge2.0-0, libatk1.0-0, libatk1.0-data, libatspi2.0-0, libc-bin, libc6, libcups2, libdbus-1-3, libdbusmenu-glib4, libdbusmenu-gtk3-4, libdrm-intel1, libdrm-nouveau2, libdrm-radeon1, libdrm2, libgail-3-0, libgcc1, libgcrypt11, libglib2.0-0, libglib2.0-data, libgnutls26, libgomp1, libgstreamer-plugins-base1.0-0, libgstreamer1.0-0, libgtk-3-0, libgtk-3-bin, libgtk-3-common, libgudev-1.0-0, libicu48, libindicator3-7, libkmod2, liblcms2-2, libpci3, libplymouth2, libpolkit-agent-1-0, libpolkit-backend-1-0, libpolkit-gobject-1-0, libprocps0, libpython-stdlib, libpython2.7, libpython2.7-minimal, libpython2.7-stdlib, libpython3-stdlib, libpython3.3-minimal, libpython3.3-stdlib, libssl1.0.0, libstdc++6, libtiff5, libudev1, libx11-6, libx11-data, libx11-xcb1, libxcb-dri2-0, libxcb-glx0, libxcb-render0, libxcb-shm0, libxcb1, libxcursor1, libxext6, libxfixes3, libxi6, libxinerama1, libxml2, libxrandr2, libxrender1, libxres1, libxt6, libxtst6, libxxf86vm1, lsb-base, lsb-release, module-init-tools, multiarch-support, openssl, passwd, pciutils, perl, perl-base, perl-modules, plymouth, plymouth-theme-ubuntu-text, policykit-1, procps, python, python-gi, python-minimal, python2.7, python2.7-minimal, python3, python3-apport, python3-distupgrade, python3-gi, python3-minimal, python3-problem-report, python3-software-properties, python3-update-manager, python3.3, python3.3-minimal, rsyslog, shared-mime-info, software-properties-common, software-properties-gtk, tar, tzdata, ubuntu-release-upgrader-core, ubuntu-release-upgrader-gtk, udev, update-manager, update-manager-core, update-notifier, update-notifier-common If this question has already been answered, I'm sorry for the repost, but I would appreciate a link to the fix. Thanks. FYI: Dell Latitude D630, Intel Centrino processor. Also, the updater is currently running what seems to be the update. I will report back when it is done going through its process to let you know if it is in fact the 13.10 update. Update 2: System went through an update, but it wasn't for the OS. I think it was an update for the error message mentioned above. Now the OS update is currently running the 'distribution upgrade' portion of the update. This is further than it had gone before. Again I will report back once this is done to let you know whether or not the update was successful. Final Update: Don't know for sure what happened, but I'm almost sure that the error mentioned above was resolved in the first update prior to the 13.10 update. All set.

  Read the article

• ZFS pool broken after upgrading to 14.04 LTS

  - by cruiserparts

  Well, I have been putting off upgrading to 14.04 for fear that I would break something. Actually for fear that it would break zfs (or I would break it). I am bascially slightly better than novice at linux. Spent the last couple of hours trying to get the pool back. Now I am at the stage where I don't think I have a complete failure, but I am worried that I may break it. So if could help me not break it, and recover it, I would be thankful. My zfs is file storage and not boot. It was working fine for a year and was working perfectly before the upgrade (scrub and everything was fine). I was confident that the upgrade would work (or at least I could fix it) because I had upgraded once in the past, the pool went missing, but I was able to get it back. I have reinstalled zfs, zfs utilities, and some dependencies (after searching this forum) I think what happened is 14.04 deleted some config file, or specified disk names differntly, but I could be wrong. When I set the pool up originally, I was using specific device Ids as I recall (because I did not want to break things if they got reassigned at boot) So see if this helps. I can confirm that old mountpoint folders are there but empty. no talloc stackframe at ../source3/param/loadparm.c:4864, leaking memory pool: naspool1 state: UNAVAIL status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM naspool1 UNAVAIL 0 0 0 insufficient replicas raidz1-0 UNAVAIL 0 0 0 insufficient replicas scsi-SATA_WDC_WD1001FALS-_WD-WMATV0990825 UNAVAIL 0 0 0 scsi-SATA_WDC_WD1001FALS-_WD-WMATV2995365 UNAVAIL 0 0 0 scsi-SATA_WDC_WD10EARS-00_WD-WMAV51894349 UNAVAIL 0 0 0 ___@ourserver:~$ sudo zpool import naspool1 cannot import 'naspool1': a pool with that name is already created/imported, and no additional pools with that name were found ___@ourserver:~$ sudo zfs list no datasets available What other output can I post to help? I'm thinking the update deleted some zfs config files. It seems like the pool exists and certainly 3 perfectly working disks did not fail at once. I am worried that I may break something without a little bit of guideance. Thanks.

  Read the article

• The upgrading service doesn`t work in South Korea

  - by Susung Park

  I am using Ubuntu, and I live in South Korea. I have installed the operating system about three months ago, so the current version in the computer is 11.04. I wanna upgrade this to the new version, and I tried some methods to do so. And when I started upgrading the computer, a message came up that it cannot download the update package because of the problem of internet connection. What should I do?

  Read the article

• After upgrading to 12.10 usb drives fail to mount

  - by John Shore

  Following upgrade to 12.10, my usb drives - both pen drives and a usb hard drive - fail to mount with the error message: Unable to mount *name of drive* volume Adding read ACL for uid 1000 to '/media/*my home file name*' failed: Operation not supported This is on a desktop Dell Inspiron 530. I also have a Dell Inspiron Mini 10 netbook which I also upgraded to 12.10 (slightly smaller installation on a flash hard drive). all devices mount automatically without problems on this computer.

  Read the article

• Update Errors in Xubuntu 12.10

  - by wil

  I updated by computer from 12.04 to 12.10 and after I finished updating when I turned on my computer I am unable to update my computer. I tried install a new copy of 13.04 but my cpu doesn't support pae. I have a IBM Thinkpad T42 with a 1.7 gigahertx Cpu. When updating through terminal This is the output. sudo apt-get upgrade: [sudo] password for wil: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: linux-image-extra-3.5.0-34-generic : Depends: linux-image-3.5.0-34-generic but it is not installed linux-image-generic : Depends: linux-image-3.5.0-34-generic but it is not installed E: Unmet dependencies. Try using -f. sudo apt-get upgrade -f: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following NEW packages will be installed: linux-image-3.5.0-34-generic 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/11.8 MB of archives. After this operation, 25.9 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 191530 files and directories currently installed.) Unpacking linux-image-3.5.0-34-generic (from .../linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb) ... This kernel does not support a non-PAE CPU. dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 No apport report written because MaxReports is reached already Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-34-generic /boot/vmlinuz-3.5.0-34-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-34-generic /boot/vmlinuz-3.5.0-34-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-34-generic_3.5.0-34.55_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) wil@wil-ThinkPad-T42:~/Desktop$

  Read the article

• problems in fetching upgrades

  - by andre

  presently using ubuntu 10.04 and I would like to upgrade to the latest ubuntu release but while trying to ugrade I have this errors . Can anybody help me how to solve this and proceed..just a beginner in using ubuntu. thanks W: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/l/linux-meta/linux-image-generic_2.6.32.38.44_i386.deb 404 Not Found [IP: 91.189.92.166 80] W: Failed to fetch http://security.ubuntu.com/ubuntu/pool/main/l/linux-meta/linux-headers-generic_2.6.32.38.44_i386.deb 404 Not Found [IP: 91.189.92.166 80]

  Read the article

• ACPI=OFF in Ubuntu 11.10

  - by Mark

  When I tried to upgrade from 11.04 to 11.10 the system froze, so I've been playing around with a couple other linux builds (Fedora, Mint, and Puppy) the last couple days and I keep coming around to the same problem: a lockup during boot; each build referencing a kernel error. On another board someone suggested booting with a boot up line of "ACPI = off". It works with other OS', but I'm not sure where to put this command. Can anyone 'enlighten' me, please?

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >