Search Results

Search found 11003 results on 441 pages for 'usb storage'.

Page 28/441 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Backup folder on sometimes attached external usb harddrive

    - by ctrler
    My girlfriend no longer has space her laptops drive to store her photos. The drive she has now is 750GB, so to go to a bigger drive would be expensive, as there isn't many 1.5tb 2.5 inch 9.5mm hdd on the market (as of now, there is only one). Because of that, I am thinking of moving her pictures to a cheap external usb hdd. As of now, I'm automatically backing up her important folders (My Documents, Pictures, etc.) using Windows 7 default backup software to a network drive. My problem is that I don't know of a good solution to automatically backup a folder residing on an usb disk. The usb disk won't be attached to the computer all the time, so I can't just treat it as a normal backup folder. Sometimes the backup would run and the folder would not be there! Anyone knows any software or methodology to backup folders on external usb hard drives that are not always present? Thanks

    Read the article

  • Using multiple USB webcams in Linux

    - by rachelderp
    Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

    Read the article

  • USB devices don't work after restoring from Stand By

    - by Steve
    Hi. I'm running Windows XP SP3 on a NEC Versa L1100 laptop. If I wake my laptop up from Stand By, no attached USB devices will function. Device Manager shows all USB entries to be working properly. There is an option to "Allow the computer to turn off this device to save power" in the Power Management properties of USB entries. Is this causing the issue or something else? I have the latest drivers for my motherboard installed.

    Read the article

  • USB drivers stopped working in Windows 8

    - by Maxim V. Pavlov
    I have installed an MSDN version of Windows 8 Professional (x64) RTM. For about 3 restarts everything worked well. But once I've rebooted again - USB drivers (all of them, inluding the USB 3 drivers) stopped working. Device Manager properties said that the USB driver is not compatible with the system. Gigabyte doesn't list Windows 8 drivers for my MB X58A-UD3R. Tried to reinstall windows 7 USB drivers - system said the current driver is fine and didn't want to reinstall. Is this the common Windows 8 problem? How can solve it or debug it even more?

    Read the article

  • Cheap NAS for connecting a USB drive to the network

    - by olaeld
    I am looking for a cheap way of hooking up a USB drive to the LAN. This could be a router with a USB port, or possibly a more regular NAS device with a USB port. I am hoping to find something below $200. But if there is a device with "magical properties" I may be interested to hear about it anyway.

    Read the article

  • "Boot Error" message when booting Ubuntu 9.10 from USB sticks (Occurs only on 1 PC)

    - by xeross
    Hey, Since today suddenly both my USB ubuntu installations (2 different USB sticks) try to boot and nothing loads but all I see is a message saying "Boot Error". When I press space it continues booting from the main hard drive. I tried reinstalling ubuntu on the USB stick but same error. This only happens on 1 computer and started happening today, before it worked just fine. Any idea what's causing this ? Regards, Xeross

    Read the article

  • Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

    - by user93353
    I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

    Read the article

  • Performance of external USB disk with ESXi5

    - by PeterMmm
    I have a new HP DL120 G7 server with ESXi5. One VM is a Win2003 instalation and I have an external USB2.0 drive attached by USB Controller and USB Device. I copy a 4GB file from external USB to server disk. In the VM that takes up to 10 minutes. On a native Win2003 that takes aprox. 3 minutes. I have no explaination for that diference: In any case the bottleneck is the USB connection, much slower than the disks (SAS, RAID1). If the USB connection on the VM would be USB1.1 and not USB2.0 it would take much more time. (The disk performance between server partitions on the VM is correct. - see update) Could be that my native box is extremely fast and the VM is the normal case. ??? Update I try with passtrough and a first run copy the same data in aprox. 7 minutes. Still 2 times slower than the native connection. I also did another messure and the copy between partitions on the same VM takes 3 minutes.

    Read the article

  • USB 3.0 Device not detected in Windows 8

    - by Tek
    About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

    Read the article

  • all USB "randomly" disconnect and reconnect

    - by teuneboon
    I'm having a weird issue currently: at seemingly random times(although it seems to happen mostly when USB is used a lot, ie downloading + uploading over my WiFi stick or viewing an HD video from my external hard-drive) all my USB devices disconnect and reconnect after a few seconds. This wouldn't be a HUGE problem if I didn't have to rely on my USB for my internet, because now every time this happens my internet, and with it stuff like remote desktop, crashes. I'm running Windows 8 Pro 64 bit with a Gigabyte 990FXA-D3 motherboard. Now the weird thing: I had the same problem with my previous pc, which had a different motherboard(I think it was an Asus M4A785TD-V EVO). I googled a bit and didn't really find anything about this, only found out I could check if something shows up in the Event Viewer, and I get this error there when the USB crashes: "A timeout occurred while waiting for the EHCI host controller Interrupt on Async Advance Doorbell response." If you require any extra information I'm happy to provide it.

    Read the article

  • How can I keep a folder synchronized to an external USB hard drive in Ubuntu?

    - by Cesar
    I have a growing music collection which I manually keep in sync with an external USB drive. Sometimes I edit their ID3 tags, add or delete a file in either the hard drive or the USB drive, and I would like to keep those changes synchronized between both. Does Ubuntu has something available that would help me with this scenario? Preferably something easy to use with a UI. Update: To clarify my question, changes may happen on both the local hard drive or the USB drive, so the sync process must be on both directions.

    Read the article

  • How do I get my mac to boot from an Ubuntu USB key?

    - by Vinay Gupta
    so if you select "mac" and "usb" on this download page, it gives a series of command line instructions to make a USB key which the MacBook will boot into Ubuntu from. http://www.ubuntu.com/desktop/get-ubuntu/download I've followed them to the letter two or three times on different USB keys, and it doesn't work. There's a very great deal of technical discussion about EFI etc. but this set of instructions seems to suggest it should Just Work, and it doesn't. Help? I'm increasingly unhappy with the more locked-down approach Apple is taking, and I'd quite like to start using Linux with a view to transitioning over to using it as my main operating system, but booting from the CD takes forever, runs slowly and I'm really hoping to get it moving off USB. Can anybody help me?

    Read the article

  • How to associate hardware volume control to USB speakers?

    - by Wolfger
    My Xubuntu system recognizes my speakers, and I can change the mixer settings to make them the active sound device, but no matter what I do, the hardware dial will only affect the onboard sound device. generic-usb 0003:046D:0A19.0003: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z205 ] on usb-0000:00:1d.1-1/input2 updated to reflect the fact that this was Xubuntu desktop (from Kubuntu install originally) where I had this problem. I was able to easily do this from Ubuntu Natty installation.

    Read the article

  • Can I use Ubuntu to write a Windows 7 ISO to USB in Ubuntu?

    - by Salim Fadhley
    I need to create a Windows installation USB drive from an ISO file. I used unetbootin which seems to be the only tool that can write non-linux images. The USB disk boots (sort-of), but it gets stuck at the very first stage. A UNetbootin spash screen that keeps counting-down from ten to 0, and then restarts. The screen looks like this: Is there a way to make Windows boot from a USB image created on Linux?

    Read the article

  • Can I use Ubuntu to write a Windows 7 ISO to USB?

    - by Salim Fadhley
    I need to create a Windows installation USB drive from an ISO file. I used UNetbootin which seems to be the only tool that can write non-Linux images. The USB disk boots (sort of), but it gets stuck at the very first stage. A UNetbootin splash screen appears that keeps counting down from 10 to 0, and then restarts. The screen looks like this: Is there a way to make Windows boot from a USB image created on Linux?

    Read the article

  • Help me i can't format my usb? i have already tried with mkdosfs and gparted

    - by Mauri Olivares
    I have a MicroSD card in a USB adapter (which plugs into a USB port on my machine, and acts like a USB flash drive). I was using Unetbootin to make this a bootable USB flash drive with Kubuntu. But I needed to cancel while it was working. So I killed the Unetbootin process from the console. Since then, I can't format the MicroSD or delete the folder that Kubuntu made. I have also tried mkdosfs, with no success. I can't mount the drive anymore either? What can I do, to make this drive usable again? Trying to create a new partition table in GParted, as described in Eliah Kagan's answer, does not work. It fails with the error message "imposible crear tabla de particiones" ("unable to create a partition table").

    Read the article

  • Can realtek 8192cu usb wireless card be used in ubuntu 12.04 with kernel 3.2.0?

    - by waterloo2005
    I do like the post RTL8188CUS Wireless USB Dongle doesn't work unless I disable wireless security . But when I plug my 8192cu usb wireless card, my computer screen is off. At that time I even can not use Alt SysRq k or Alt SysRq + reisub. I compile the latest driver of 8192cu on ubuntu 12.04 with kernel 3.2.0-34. In RealTek site, I download 8192cu drive which is for Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8. But now in Ubuntu12.04 my kernel is 3.2.0-34. Every time I plug the usb 8192cu wireless card my system halts. Now I try to blacklist both the system's rtl8192cu driver and the new 8192cu driver I compile, but the system still halts when I plug the usb driver. What about you ? Thanks!

    Read the article

  • How do I get my Mac to boot from an Ubuntu USB key?

    - by user11621
    If you select "USB" and "Mac" on this download page, it gives a series of command line instructions to make a USB key which the MacBook will boot into Ubuntu from. I've followed them to the letter two or three times on different USB keys, and it doesn't work. There's a very great deal of technical discussion about EFI etc. but this set of instructions seems to suggest it should just work, but it doesn't. Help? I'm increasingly unhappy with the more locked-down approach Apple is taking, and I'd quite like to start using Linux with a view to transitioning over to using it as my main operating system, but booting from the CD takes forever, runs slowly and I'm really hoping to get it moving off USB. Can anybody help me?

    Read the article

  • Make a radio-streaming PC pretend to be a mass-storage USB device

    - by monov
    I'm listening to a net radio on my PC I want the sound to go through my boombox cause it has nice speakers/amp The boombox has no "incoming" audio jack that just plays what comes over the wire However the boombox has a USB jack where you can put a thumbdrive with music. The question: How do I make the PC pretend to be a mass-storage device, and dynamically send all received audiodata to the boombox over a symmetric male USB cable? Failing that, at least tell me how to do it for local files (rather than streams). OS: Vista

    Read the article

  • Results Delphi users who wish to use HID USB in windows

    - by Lex Dean
    Results Delphi users who wish to use HID USB in windows HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB Contain a list if keys containing vender ID and Producer ID numbers that co inside with the USB web sites data base. These numbers and the GUID held within the key gives important information to execute the HID.dll that is otherwise imposable to execute. The Control Panel/System/Hardware/Device manager/USB Serial Bus Controllers/Mass Storage Devices/details simply lists the registry data. The access to the programmer has been documented through the API32.dll with a number of procedures that accesses the registry. But that is not the problem yet it looks like the problem!!!!!!!!! The key is info about the registry and how to use it. These keys are viewed in RegEdit.exe it’s self. Some parts of the registry like the USB have been given a windows security system type of protection with a Aurthz.dll to give the USB read and right protection. Even the api32.dll. Now only Microsoft give out these details and we all know Microsoft hate Delphi. Now C users have enjoyed this access for over 10 years now. Now some will make out that you should never give out such information because some idiot may make a stupid virus (true), but the argument is also do Delphi users need to be denied USB access for another ten years!!!!!!!!!!!!. What I do not have is the skill in is assembly code. I’m seeking for some one that can trace how regedit.exe gets its access through Aurthz.dll to access the USB data. So I’m asking all who reads this:- to partition any friend they have that has this skill to get the Aurthz.dll info needed. I find communicating with USB.org they reply when they have a positive email reply but do not bother should their email be a slightly negative policy. For all simple reasoning, all that USB had to do was to have a secure key as they have done, and to update the same data into a unsecured key every time the data is changed for USB developer to access. And not bother developers access to Aurthz.dll. Authz.dll with these functions for USB:- AuthzFreeResourceManager AuthzFreeContext AuthzAccessCheck(Flags: DWORD; AuthzClientContext: AUTHZ_CLIENT_CONTEXT_HANDLE; pRequest: PAUTHZ_ACCESS_REQUEST; AuditInfo: AUTHZ_AUDIT_INFO_HANDLE; pSecurityDescriptor: PSECURITY_DESCRIPTOR; OptionalSecurityDescriptorArray: PSECURITY_DESCRIPTOR; OptionalSecurityDescriptorCount: DWORD; //OPTIONAL, Var pReply: AUTHZ_ACCESS_REPLY; pAuthzHandle: PAUTHZ_ACCESS_CHECK_RESULTS_HANDLE): BOOl; AuthzInitializeContextFromSid(Flags: DWORD; UserSid: PSID; AuthzResourceManager: AUTHZ_RESOURCE_MANAGER_HANDLE; pExpirationTime: int64; Identifier: LUID; DynamicGroupArgs: PVOID; pAuthzClientContext: PAUTHZ_CLIENT_CONTEXT_HANDLE): BOOL; AuthzInitializeResourceManager(flags: DWORD; pfnAccessCheck: PFN_AUTHZ_DYNAMIC_ACCESS_CHECK; pfnComputeDynamicGroups: PFN_AUTHZ_COMPUTE_DYNAMIC_GROUPS; pfnFreeDynamicGroups: PFN_AUTHZ_FREE_DYNAMIC_GROUPS; ResourceManagerName: PWideChar; pAuthzResourceManager: PAUTHZ_RESOURCE_MANAGER_HANDLE): BOOL; further in Authz.h on kolers.com J Lex Dean.

    Read the article

  • How to safely remove a USB drive on Windows CE 5.0?

    - by Radu C
    Until today, I assumed that Windows CE was writing everything to disk and I wouldn't end up with a broken FAT16 when I removed the USB stick. Today, I was proven wrong. I use a USB stick to test things on a WinCE 5.0 device. I don't write anything from the app or WinCE to the stick. I just execute my app, and my app reads its settings and pictures from the stick. Today, just this order of operations broke my stick filesystem (and I have to fix it). Is there a way to tell WinCE 5.0 to unmount the stick before I remove it? It sees it as a "Hard Drive", and the tap-and-hold menu has nothing along the lines of "safely remove drive". I'm happy with both code to do this operation and some trick that I didn't find in Windows CE yet. Thank you.

    Read the article

  • networked storage for a research group, 10-100 TB

    - by Marc
    this is related to this post: http://serverfault.com/questions/80854/scalable-24-tb-nas-for-research-department but perhaps a little more general. Background: We're a research lab of around 10 people who do a lot of experiments that involve taking pictures at one of several lab setups and then analyzing it an one of several lab computers. Each experiment may produce 2 or 3 GB of data, and we are generating data at the rate of about 10 TB/year. Right now, we are storing the data on a 6-bay netgear readynas pro, but even with 2 TB drive, this only gives us 10 TB of storage. Also, right now we are not backing up at all. Our short term backup plan is to get a second readynas, put it in a different building and mirror the one drive onto the other. Obviously, this is somewhat non-ideal. Our options: 1) We can pay our university $400/ TB /year for "backed up" online storage. We trust them more than we trust us, but not a whole lot. 2) We can continue to buy small NASs and mirror them between offices. One limit, although stupid, is that we don't have an unlimited number of ethernet jacks. 3) We can try to implement our own data storage solution, which is why I'm asking you guys. One thing to consider is that we're a very transient population and none of us are network administration experts. I will probably be here only another year or so, and graduate students, who are here the longest, have a 5-6 year time scale. So nothing can require expert oversight. Our data transfer rates are low - most of the data will just sit on the server waiting for someone to look at it once or twice - so we don't need a really high speed system. Given these contraints, can someone recommend a fairly low-cost, scalable, more or less turn key shared data storage system with backup in a separate physical location. Does such a thing exist or should we just pay the university to take care of it for us? As a second question, our professor just got tenure and is putting together a budget. Here the goal is to ask for as much as you can and hope you get a fraction of it. So the same question, minus the low-cost. Without budget constraints, can you recommend a scalable turn-key backed up storage system. Thanks

    Read the article

  • SPARC T4-2 Produces World Record Oracle Essbase Aggregate Storage Benchmark Result

    - by Brian
    Significance of Results Oracle's SPARC T4-2 server configured with a Sun Storage F5100 Flash Array and running Oracle Solaris 10 with Oracle Database 11g has achieved exceptional performance for the Oracle Essbase Aggregate Storage Option benchmark. The benchmark has upwards of 1 billion records, 15 dimensions and millions of members. Oracle Essbase is a multi-dimensional online analytical processing (OLAP) server and is well-suited to work well with SPARC T4 servers. The SPARC T4-2 server (2 cpus) running Oracle Essbase 11.1.2.2.100 outperformed the previous published results on Oracle's SPARC Enterprise M5000 server (4 cpus) with Oracle Essbase 11.1.1.3 on Oracle Solaris 10 by 80%, 32% and 2x performance improvement on Data Loading, Default Aggregation and Usage Based Aggregation, respectively. The SPARC T4-2 server with Sun Storage F5100 Flash Array and Oracle Essbase running on Oracle Solaris 10 achieves sub-second query response times for 20,000 users in a 15 dimension database. The SPARC T4-2 server configured with Oracle Essbase was able to aggregate and store values in the database for a 15 dimension cube in 398 minutes with 16 threads and in 484 minutes with 8 threads. The Sun Storage F5100 Flash Array provides more than a 20% improvement out-of-the-box compared to a mid-size fiber channel disk array for default aggregation and user-based aggregation. The Sun Storage F5100 Flash Array with Oracle Essbase provides the best combination for large Oracle Essbase databases leveraging Oracle Solaris ZFS and taking advantage of high bandwidth for faster load and aggregation. Oracle Fusion Middleware provides a family of complete, integrated, hot pluggable and best-of-breed products known for enabling enterprise customers to create and run agile and intelligent business applications. Oracle Essbase's performance demonstrates why so many customers rely on Oracle Fusion Middleware as their foundation for innovation. Performance Landscape System Data Size(millions of items) Database Load(minutes) Default Aggregation(minutes) Usage Based Aggregation(minutes) SPARC T4-2, 2 x SPARC T4 2.85 GHz 1000 149 398* 55 Sun M5000, 4 x SPARC64 VII 2.53 GHz 1000 269 526 115 Sun M5000, 4 x SPARC64 VII 2.4 GHz 400 120 448 18 * – 398 mins with CALCPARALLEL set to 16; 484 mins with CALCPARALLEL threads set to 8 Configuration Summary Hardware Configuration: 1 x SPARC T4-2 2 x 2.85 GHz SPARC T4 processors 128 GB memory 2 x 300 GB 10000 RPM SAS internal disks Storage Configuration: 1 x Sun Storage F5100 Flash Array 40 x 24 GB flash modules SAS HBA with 2 SAS channels Data Storage Scheme Striped - RAID 0 Oracle Solaris ZFS Software Configuration: Oracle Solaris 10 8/11 Installer V 11.1.2.2.100 Oracle Essbase Client v 11.1.2.2.100 Oracle Essbase v 11.1.2.2.100 Oracle Essbase Administration services 64-bit Oracle Database 11g Release 2 (11.2.0.3) HP's Mercury Interactive QuickTest Professional 9.5.0 Benchmark Description The objective of the Oracle Essbase Aggregate Storage Option benchmark is to showcase the ability of Oracle Essbase to scale in terms of user population and data volume for large enterprise deployments. Typical administrative and end-user operations for OLAP applications were simulated to produce benchmark results. The benchmark test results include: Database Load: Time elapsed to build a database including outline and data load. Default Aggregation: Time elapsed to build aggregation. User Based Aggregation: Time elapsed of the aggregate views proposed as a result of tracked retrieval queries. Summary of the data used for this benchmark: 40 flat files, each of size 1.2 GB, 49.4 GB in total 10 million rows per file, 1 billion rows total 28 columns of data per row Database outline has 15 dimensions (five of them are attribute dimensions) Customer dimension has 13.3 million members 3 rule files Key Points and Best Practices The Sun Storage F5100 Flash Array has been used to accelerate the application performance. Setting data load threads (DLTHREADSPREPARE) to 64 and Load Buffer to 6 improved dataloading by about 9%. Factors influencing aggregation materialization performance are "Aggregate Storage Cache" and "Number of Threads" (CALCPARALLEL) for parallel view materialization. The optimal values for this workload on the SPARC T4-2 server were: Aggregate Storage Cache: 32 GB CALCPARALLEL: 16   See Also Oracle Essbase Aggregate Storage Option Benchmark on Oracle's SPARC T4-2 Server oracle.com Oracle Essbase oracle.com OTN SPARC T4-2 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 28 August 2012.

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >