Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 280/1029 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >

  • Firefox 3.5.6 causes entire computer to freeze

    - by Anthony Aziz
    Here's the situation: Environment: Just installed a fresh copy of Win7 Pro 32-bit to NTFS partition on 750GB SATA drive Hardware: E8400 3GHz ASUS P5QL Pro 4GB DDR2 1066 RAM EVGA 9800 GTX+ Plenty of cooling, no problems with hardware before Data is stored on a separate partition, including My Documents No security software is yet installed No extensions installed yet Problem: While using Firefox, sometimes the entire computer will freeze/hang. I get no mouse or keyboard input, can't CTRL+ALT+DEL, no "not responding" indication, just a static image on my display. My drivers are all up to date as far as I'm aware (I just installed this copy of Windows last week). I first noticed this when trying to install Xmarks. I went to the Xmarks site and tried to install and it would freeze. I managed to get it installed (Safe mode and the Mozilla addon site worked), but when I go to configure it (log in, etc), the computer freezes. I don't think it's a matter of usage time or memory issues, because while testing, I browsed wallpaper galleries for about 30 minutes, sometimes as many as 12-15 tabs open at a time, without issue. Sometimes I won't even try to install Xmarks at it will hang. I can install (some) other extensions, the only one I've tried is download status bar (which works). What I've done to try to fix: Restarted (duh) Windows safe mode Completely remove Firefox and install it to a new directory, according to Mozilla's KB (I haven't tried the profile manager, though I assume this does the same thing, except perhaps more thoroughly) Some BIOS changes, including Power options, disabling oveclocking (it was a modest overclock on the CPU, which has run Win7 beta and RC for almost a year now) Memtest Used another Windows user profile, same tragic results I'm STUCK now, with no idea what to do. I'm using Chrome as my main browser at the moment, but that's not something I want to be stuck with. I like Firefox and want to use it. I'm going to try creating a new profile first. One thing I did notice: I started leaving task manager and performance monitor open when anticipating (but dreading) a freeze. firefox.exe had low CPU and low memory, but it looked like overall disk usage was seeing some spikes on the small graph Performance Monitor gives you. I saw on one blog post a fellow using XP moved his Local Settings directory from a separate drive to his main drive, and that solved it, but I don't think my AppData directory is on my D: drive, and that's on the same physical device anyways. Still, something that might be worth trying. I'd extremely appreciate any help. Thanks very much. I really don't want to reinstall Windows from scratch again :( Anthony Aziz

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

  • Chrome OS instead of Splashtop OS

    - by blsub6
    I have an HP Mini 110 with Splashtop OS as an 'instant on' OS. I've updated to the newest version which has a Chromium browser...and not too much else You know what would be really cool? The newest Chromium/Chrome OS build on there instead Can someone in the know tel me if this is even possible? (just to be clear, I don't want to put Chrome OS on my hard drive or boot to a USB drive. I want Chrome OS installed in the same place that Splashtop is installed.)

    Read the article

  • Can I set up a separate RAID 5 devices?

    - by GregH
    I have a GIGABYTE GA-P55M-UD2 motherboard in my system (Windows 7 64 bit) and currently have a Western Digital SATA 10k RPM drive in it. Is it possible to add three more SATA drives to make a single RAID 5 device that is separate from the current 10k rpm drive that I have in it? Once I enable RAID for the SATA drives, I am not required to make all of the drives part of the RAID volume am I? I can have separate RAID'ed and non-RAID'ed volumes can't I?

    Read the article

  • Firewire 800 data transfer too slow on Macbook Pro Unibody and Win7 RC

    - by dtmunir
    I'm trying to back up some data on an external hard drive and am finding the transfer rate to be unbearably slow. My environment is as follows: Macbook Pro Unibody (late 2008) Windows 7 RC, 64-bit Lacie, rugged 500GB portable hard drive I have tried using a number of methods including simple copying in Explorer, Teracopy, Crashplan, and Windows backup. I am averaging around 1MB/s which seems terribly slow. How do I identify what is the cause of this slow file transfer, and then how do I go about addressing the issue.

    Read the article

  • Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca

    - by Marlen T. B.
    I have recently (as of July 2012) bought a HP Pavilion dv6-6c40ca laptop. It came pre-installed with Windows 7 on an MBR. I installed Ubuntu 12.04 on it on a GPT partition in what I think is BIOS emulation mode. I made a BIOS-Grub partition so the install didn't fail. That is what it is for .. right? Now I want to upgrade to UEFI mode. How would I Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca. Or is it impossible? My laptop, despite its new age may not be UEFI 2.0+ capable. If it isn't how can I install a software UEFI (i.e. a DUET such as the one by tianocore). Or is this too impossible? A link to my laptop's specs is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137924&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=5218530 My laptop should have a UEFI given this link from HP http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01442956#N218. And from the link I draw a quote: That means most notebooks distributed with Windows Vista, and all notebooks distributed with Windows 7, have the UEFI environment. My laptop had Windows 7 Home Premium pre-installed. OK. Following the comments so far -- NOTE: I am trying to do this on an external drive so I can see if it works. I have partitioned the drive using GParted as a GPT drive. Created a 200MB partition at the beginning of the drive with a FAT32 file system. Given the 200MB partition a label of "EFI". Set the boot flag on the 200MB partition. What should a do next to install Ubuntu 12.04? Given the link: https://help.ubuntu.com/community/UEFIBooting#Selecting_the_.28U.29EFI_Graphic_Protocol In my first read through (just to see if I will understand everything before I start) I get to step 2.3 Install GRUB2 in (U)EFI systems The first line is Boot into Linux (any live ISO) preferably in UEFI mode. Um .. how do you tell what mode your live CD is in?! And how do you change it if the mode is wrong?

    Read the article

  • Disk Image Tools for Windows Server 2008

    - by Jon Rauschenberger
    I have a Windows Server 2008 X64 machine that I need to swap the boot drive on. I'd like to use a disk image/restore utility to make an image of the boot partition and restore that to the new drive. Does anyone know of a free or reasonably priced tool that can do this? I know that Acronis True Image will do it, but you need to have their server product to restore images of a server OS and it's prohibitively expensive ($850). Thanks, jon

    Read the article

  • window login when web application is using network share in IIS 6

    - by James
    Hi, I have installed a web application which is configured using a network drive But i am keep getting a pop up asking for credentials looking in the event log, the network logon is set to my domain/account which looks fine however caller user name is empty (not sure if this is an issue) the application works fine when i use a local drive the application also runs fine when i set "connect as" user the application also works fine when a share on the local machine is used!! direct asses using the unc path is not a problem Please advise what i can do or should check Thanks and Regards, James

    Read the article

  • missing files after reassemble of RAID-5

    - by Kris_R
    I had to open my file-server's housing on Sunday to replace a faulty fan. What I didn't see was that one of the sata-cables was not properly connected. The 1st thing I did after a reboot was a check of the RAID status and it showed immediately that one drive is missing. Till this moment the device was not used (however it was mounted, so I'm not 100% sure that system did nothing). I stopped md0 and re-plugged the cable: mdadm --stop /dev/md0 poweroff After another reboot I checked the removed drive: mdadm --examine /dev/sdd1 ... Checksum : 3276bc1d - correct Events : 315782 Layout : left-symmetric Chunk Size : 32K Number Major Minor RaidDevice State this 0 8 49 0 active sync /dev/sdd1 0 0 8 49 0 active sync /dev/sdd1 1 1 8 65 1 active sync /dev/sde1 2 2 8 33 2 active sync /dev/sdc1 3 3 8 17 3 active sync /dev/sdb1 I was a bit surprised that it was shown as active (even if earlier mdadm said, that this device was removed from array) and its checksum was OK. I recreated RAID with: mdadm --assemble /dev/md0 --scan The command mdadm --detail /dev/md0 showed that all drives were running and system was in "clean" state. I mounted the device md0 and then came hic-cup. I wanted to work on one of the last files that I had been using before all the situation and it was not there. In another place I missed actually all files from the directory where I was working. As far as I can see most of the files that are older than a few days are intact but some newer ones are missing. Now the big question: what would be your advice? Is there a way to get these data? I thought about removing the drive that was earlier labeled by mdadm and rebuild array with another empty HDD. I've found that after re-assemble the "broken" drive has another label (changed from sdd to sdb). Can this have influence on rebuilt process? If yes, how to reassemble the array properly? I'm sure the SATA-cables are connected still in the same order to the controller. p.s. Please no advises like "restore from backup". I'm doing back-ups on Sunday's night and this happened in the late afternoon, so backup is not really options for me. p.s.s. I asked this question on Unix&Linux but no answer came up during last two days. I'm getting quite anxious. Sorry for duplicating if any of you reading the other forum.

    Read the article

  • Data loss through permissions change?

    - by charliehorse55
    I seem to have deleted some files on my media drive, simply by changing the permissions. The Story I have many operating systems installed on my computer, and constantly switch between them. I bought a 1TB HD and formatted it as HFS+ (not journaled). It worked well between OSX and all of my linux installations while having much better metadata support than NTFS. I never synced the UIDs for my operating systems so the permissions were always doing funny things. Yesterday I tried to fix the permissions by first changing the UIDs of the other operating systems to match OSX, and then changing the file ownership of all files on the drive to match OSX. About 50% of the files on the drive were originally owned by OSX, the other half were owned by the various linux installations. I started to try and change the file permissions for the folders, and that's when it went south. The Commands These commands were run recursively on the one section of the drive. sudo chflags nouchg sudo chflags -N sudo chown myusername sudo chmod 666 sudo chgrp staff The Bad Sometime during the execution of these commands, all of the files belonging to OSX were deleted. If a folder had linux based files it would remain intact but any folder containing exclusively OSX files was erased. If a folder containing linux files also contained a subfolder with only OSX files, the sub folder would remain but is inaccesible and displays a file size of 0 bytes. Luckily these commands were only run on the videos folder, I also have a music folder with the same issue but I did not execute any of these commands on it. Effectively I have examples of the file permissions for all 3 states - the linux files before and after, and the OSX files before. OSX File Before -rw-r--r--@ 1 charliehorse 1000 3634241 15 Nov 2008 /path/to/file com.apple.FinderInfo 32 Linux File before: -rw-r--r--@ 1 charliehorse 1000 5321776 20 Sep 2002 /path/to/file/ com.apple.FinderInfo 32 Linux File After (Read only): (Different file, but I believe the same permissions originally) -rw-rw-rw-@ 1 charliehorse staff 366982610 17 Jun 2008 /path/to/file com.apple.FinderInfo 32 These files still exist so if there are any other commands to run on them to determine what has happened here, I can do that. EDIT Running ls on one of the "empty" deleted OSX folders yields this: ls: .: Permission denied ls: ..: Permission denied ls: subdirA: Permission denied ls: subdirB: Permission denied ls: subdirC: Permission denied ls: subdirD: Permission denied I believe my files might still be there, but the permissions are screwed.

    Read the article

  • pci-express ssd running an OS

    - by tom
    Hi, Simple question really, is it possible to install an OS such as windows or ubuntu on a PCI-Express SSD (solid state drive)? And if so is it as straight forward as selecting that drive on install? Thanks Tom

    Read the article

  • Windows Backup (2008 R2) recovery and timezone

    - by GrZeCh
    Hello, does difference between timezones on Windows Server 2008 where backup was made and reovery console makes difference? Recovery console (wbadmin from command line too) is not finding any backup on local hard drive connected to server. Thanks EDIT: I'm working on Windows Server 2008 R2 EDIT2: This is not related to timezone. When I connected backup hard drive from Windows 2008 R2 Release Candidate recovery console runned from RTM system version DVD found stored backups from it without problems.

    Read the article

  • Disc2vhd and partitions question

    - by dotnetdev
    Hi, I am using Disc2Vhd to make a vhd of my drive. Does the tool support partitions? My partitions of C:\ are listed as both drives and volumes. In short, is there any issue when I select both partitions that make one physical drive? Thanks

    Read the article

  • How to restore a VirtualBox image given the .vdi file

    - by Ramon Tayag
    Background I have VirtualBox on Linux and recently the drive with the system files failed on me. I'm able to use the Live CD to view the files of the storage drive, and through this, I can copy my data files to another computer while I work on this one. How do I load the .vdi in another computer (or in this case, the fresh install of Ubuntu)? I see many samples online of how to export it, but it assumes the host is currently working. Thanks!

    Read the article

  • chkdsk, SeaTools, and "does not have enough space to replace bad clusters"

    - by Zian Choy
    When I tried to do a Windows Vista Complete PC Backup, I received an error message that blathered about bad sectors. Then, when I ran chkdsk /r on the destination drive, this is what I got: C:\Windows\system32>chkdsk /R E: The type of the file system is NTFS. Volume label is Desktop Backup. CHKDSK is verifying files (stage 1 of 5)... 822016 file records processed. File verification completed. 1 large file records processed. 0 bad file records processed. 0 EA records processed. 0 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)... 848938 index entries processed. Index verification completed. 0 unindexed files processed. CHKDSK is verifying security descriptors (stage 3 of 5)... 822016 security descriptors processed. Security descriptor verification completed. 13461 data files processed. CHKDSK is verifying file data (stage 4 of 5)... The disk does not have enough space to replace bad clusters detected in file 239649 of name . The disk does not have enough space to replace bad clusters detected in file 239650 of name . The disk does not have enough space to replace bad clusters detected in file 239651 of name . An unspecified error occurred.f 822000 files processed) Yet, when I ran the SeaTools short & long generic tests on the Seagate disk, I didn't receive any errors. I know that I could reformat the disk and try running chkdsk /r again but I'd prefer to avoid waiting 4 hours in the hope that the problem was magically fixed. On the other hand, if I RmA the drive to Seagate, I have no SeaTools error number to use and they may claim that the drive is just fine. What should I try to do next? Side frustration: There is plenty of free hard drive space. The E: partition has 182 GB free.

    Read the article

  • Macrium Reflect Recovery Linux Recovery Disc hangs up on booting

    - by user8583
    I created an image of my system with macrium reflect freeware program and stored the image on an usb external hard drive. However the macrium reflect linux recovery disc on startup hangs up of the first three lines of instructions and therefore I cannot access the image on the usb external hard drive if I wish to recover my system. I have a Lenovo laptop with the Windows-7 Home Premium operating system. What can be done to ensure that the recovery disc will work?

    Read the article

  • How to restore using DriveImage XML image if unable to make a BartPE CD

    - by CChriss
    I have a Windows Vista laptop that won't boot at all. On the D: drive I have DriveImage XML images of C: drive, but I don't have a BartPE boot CD and I don't have a Vista install CD. How can I image the C: using the images on D: if I can't make a BartPE CD because I can't boot to Windows? Is there a BartPE (with DriveImage XML plugin) iso I can download from somewhere, or what can I do? Thanks.

    Read the article

  • Cracking truecrypt files in minutes? Or just truecrypt harddrives in minutes?

    - by oshirowanen
    Apparently http://www.lostpassword.com/kit-forensic.htm can be used to crack truecrypt hard drive encryption. Has anyone tried it and is it possible to crack truecrypt files too with this software? Passware Kit Forensic, complete with Passware FireWire Memory Imager, is the first and only commercial software that decrypts BitLocker and TrueCrypt hard disks, and instantly recovers Mac and Windows login passwords of seized computers.

    Read the article

  • Make backup image (.tib/.vhd) as my main operating system?

    - by Joann
    My old hard drive is dying so I want to move my Windows 7 operating system to another hard drive. They say cloning using Acronis would do the trick, but for some reason it refuses to work. I also tried EASEUS Todo Backup, but it doesn't work either. Can you recommend some suggestions on how to transfer my operating system? I heard about converting .tib to .vhd and then booting from it, but does that achieve the same effect as cloning?

    Read the article

  • How to save QuickTime movie trailer files?

    - by Jian Lin
    Is it true that a few months ago, QuickTime allows users to save the movie trailers without using the Pro version? Right now, it seems like we need to pay $29.99 to save the movie trailer clip onto the hard drive... Several months ago, I also tried using Ubuntu and there was a plugin to view the movie trailer and was able to save it too... Are there other ways to save it to the hard drive?

    Read the article

  • On the fly volume compression (waveform capping) for VLC or OS X

    - by Grammar Nazi
    I'm looking to impose a hard limit on a movie. In particular when I have earbuds in and a reasonable volume set, loud or sudden sounds (gun shot, dramatic sound effects, gun fire, etc) are loud enough to hurt. Lowering the volume makes speech and other sounds hard to hear. Is there a third party on-the-fly solution for this, or a plug-in for VLC that I can use?

    Read the article

  • What's the best way to move c:\users to d:\users under vista/W7

    - by Scott
    I just installed Windows 7 RC1 and want to move c:\users to d:\users. What's the best way to do this? Due to the fact that Windows 7 creates a reserved partition that is mounted as C: in the recovery console, I had to use the following commands robocopy /mir /xj D:\Users E:\Users mklink D:\Users D:\Users /j Both D's in the mklink command are correct. When the system reboots, the drive that was D in the recovery console becomes the C drive.

    Read the article

  • Cannot make BartPE CD - how restore DriveImageXML image?

    - by CChriss
    I have a Windows Vista laptop that won't boot at all. On the D: drive I have DriveImage XML images of C: drive, but I don't have a BartPE boot CD and I don't have a Vista install CD. How can I image the C: using the images on D: if I can't make a BartPE CD because I can't boot to Windows? Is there a BartPE (with DriveImage XML plugin) iso I can download from somewhere, or what can I do? Thanks.

    Read the article

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287  | Next Page >