generated - Page 280 - Developer IT

Dealing with "I-am-cool-and-you-are-dumb" manager [closed]

- by Software Guy

I have been working with a software company for about 6 months now. I like the projects I work on there and I really like all the people there except for 1 guy. That guy is technically smart, and he is a co-founder of the company. He is an okay guy in person (the kind you wouldn't want to care about much) but things get tricky when he is your manager. In general I am all okay but there are times when I feel I am not being treated fairly: He doesn't give much thought to when he makes mistakes and when I do something similar, he is super critical. Recently he went as far as to say "I am not sure if I can trust you with this feature". The detais of this specific case are this: I was working on this feature, and I was already a couple of hours over my normal working hours, and then I decided to stop and continue tomorrow. We use git, and I like to commit changes locally and only push when I feel they are ready. This manager insists that I push all the changes to the central repo (in case my hard drive crashes). So I push the change, and the ticket is marked as "to be tested". Next day I come in, he sits next to me and starts complaining and says that I posted above. I really didn't know what to say, I tried to explain to him that the ticket is still being worked upon but he didn't seem to listen. He interrupts me in-between when I am coding, which I do not mind, but when I do that same, his face turns like this :| and reacts as if his work was super important and I am just wasting his time. He asks me to accumulate all questions, and then ask him altogether which is not always possible, as you need a clarification before you can continue on a feature implementation. And when I am coding, he talks on the phone with his customers next to me (when he can go to the meeting room with his laptop) and doesn't care. He made me switch to a whole new IDE (from Netbeans to a commercial IDE costing a lot of money) for a really tiny feature (which I later found out was in Netbeans as well!). I didn't make a big deal out of it as I am equally comfortable working with this new IDE, but I couldn't get the science behind his obsession. He said this feature makes sure that if any method is updated by a programmer, the IDE will turn the method name to red in places where it is used. I told him that I do not have a problem since I always search for method usage in the project and make sure its updated. IDEs even have refactoring features for exactly that, but... I recently implemented a feature for a project, and I was happy about it and considering him a senior, I asked him his comments about the implementation quality.. he thought long and hard, made a few funny faces, and when he couldn't find anything, he said "ummm, your program will crash if JS is disabled" - he was wrong, since I had made sure it would work fine with default values even if JS was disabled. I told him that and then he said "oh okay". BUT, the funny thing is, a few days back, he implemented something and I objected with "But that would not run if JS is disabled" and his response was "We don't have to care about people who disable JS" :-/ Once he asked me to investigate if there was a way to modify a CMS generated menu programmatically by extending the CMS, I did my research and told him that the only was is to inject a menu item using JavaScript / jQuery and his reaction was "ah that's ugly, and hacky, not acceptable" and two days later, I see that feature implemented in the same way as I had suggested. The point is, his reaction was not respectful at all, even if what I proposed was hacky, he should be respectful, that I know what's hacky and if I am suggesting something hacky, there must be a reason for it. There are plenty of other reasons / examples where I feel I am not being treated fairly. I want your advice as to what is it that I am doing wrong and how to deal with such a situation. The other guys in the team are actually very good people, and I do not want to leave the job either (although I could, if I want to). All I want is respect and equal treatment. I have thought about talking to this guy in a face to face meeting, but that worries me that his attitude might get worse and make things more difficult for me (since he doesn't seem to be the guy who thinks he can be wrong too). I am also considering talking to the other co-founder but I am not sure how he will take it (as both founders have been friends forever). Thanks for reading the long message, I really appreciate your help.

Read the article

MVVM - how to make creating viewmodels at runtime less painfull

- by Mr Happy

I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painfull. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genious since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use an DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an indepth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

Read the article

Can't see my partitions after grub recovery

- by dimbo

I stupidly inserted the windows CD into my dual boot Ubuntu 11.10 / windows xp system. I just wanted to see if I could install windows on my external usb HD, but didn't actually go ahead with the install. It seems like the windows CD messed up my MBR and I had to use boot-repair and the ubuntu 11.10 live CD to gain access to ubuntu again. It seems to boot up a little differently (slower) but works. However, I now cant see any of my partitions in nautilus (there are 3). When I open gparted, it just shows my whole hard drive as unallocated (I know it has a windows partition that works and my ubuntu partition that I am using now). If I insert a usb pen, it is also not visible in nautilus but in gparted shows up as a FAT32 partition (which is correct although I cannot access it). sudo fdisk -l gives the following : demian@dimbo-TP:~$ sudo fdisk -l [sudo] password for demian: omitting empty partition (5) Disk /dev/sda: 320.1 GB, 320072933376 bytes 240 heads, 63 sectors/track, 41345 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x877b877b Device Boot Start End Blocks Id System /dev/sda1 * 63 63842309 31921123+ 7 HPFS/NTFS/exFAT /dev/sda2 63844350 133484084 34819867+ 5 Extended /dev/sda3 127636488 133484084 2923798+ 82 Linux swap / Solaris /dev/sda4 133484085 625137344 245826630 83 Linux /dev/sda5 63844352 123445247 29800448 83 Linux /dev/sda6 123447296 127635455 2094080 82 Linux swap / Solaris Disk /dev/sdb: 8100 MB, 8100249600 bytes 12 heads, 40 sectors/track, 32960 cylinders, total 15820800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 5992 15820799 7907404 c W95 FAT32 (LBA) Here is my grub.conf file. Like I said before, I had to use the 'boot-repair' utility with the live cd to get grub working again. I think that this utility maybe created a new grub for me because the startup is definitely not the same. The screen goes blank for a while, and then the ubuntu loading dots come up for a brief moment (instead of during the whole startup process) before the dektop is displayed. Anyway : # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-12-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro quiet splash vt.handoff=7 initrd /boot/initrd.img-3.0.0-12-generic } menuentry 'Ubuntu, with Linux 3.0.0-12-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a echo 'Loading Linux 3.0.0-12-generic ...' linux /boot/vmlinuz-3.0.0-12-generic root=UUID=5349ff67-b7b7-489f-a881-ae49c1dcd84a ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 5349ff67-b7b7-489f-a881-ae49c1dcd84a linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Professional (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 72A89361A89322A1 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I get things back to normal. Thanks, Demian.

Read the article

How to handle updated configuration when it's already been cloned for editing

- by alexrussell

Really sorry about the title that probably doesn't make much sense. Hopefully I can explain myself better here as it's something that's kinda bugged me for ages, and is now becoming a pressing concern as I write a bit of software with configuration. Most software comes with default configuration options stored in the app itself, and then there's a configuration file (let's say) that a user can edit. Once created/edited for the first time, subsequent updates to the application can not (easily) modify this configuration file for fear of clobbering the user's own changes to the default configuration. So my question is, if my application adds a new configurable parameter, what's the best way to aid discoverability of the setting and allow the user (developer) to override it as nicely as possible given the following constraints: I actually don't have a canonical default config in the application per se, it's more of a 'cascading filesystem'-like affair - the config template is stored in default/config.json and when the user wishes to edit the configuration, it's copied to user/config.json. If a user config is found it is used - there is no automatic overriding of a subset of keys, the whole new file is used and that's that. If there's no user config the default config is used. When a user wishes to edit the config they run a command to 'generate' it for them (which simply copies the config.json file from the default to the user directory). There is no UI for the configuration options as it's not appropriate to the userbase (think of my software as a library or something, the users are developers, the config is done in the user/config.json file). Due to my software being library-like there's no simple way to, on updating of the software, run some tasks automatically (so any ideas of look at the current config, compare to template config, add ing missing keys) aren't appropriate. The only solution I can think of right now is to say "there's a new config setting X" in release notes, but this doesn't seem ideal to me. If you want any more information let me know. The above specifics are not actually 100% true to my situation, but they represent the problem equally well with lower complexity. If you do want specifics, however, I can explain the exact setup. Further clarification of the type of configuration I mean: think of the Atom code editor. There appears to be a default 'template' config file somewhere, but as soon as a configuration option is edited ~/.atom/config.cson is generated and the setting goes in there. From now on is Atom is updated and gets a new configuration key, this file cannot be overwritten by Atom without a lot of effort to ensure that the addition/modification of the key does not clobber. In Atom's case, because there is a GUI for editing settings, they can get away with just adding the UI for the new setting into the UI to aid 'discoverability' of the new setting. I don't have that luxury. Clarification of my constraints and what I'm actually looking for: The software I'm writing is actually a package for a larger system. This larger system is what provides the configuration, and the way it works is kinda fixed - I just do a config('some.key') kinda call and it knows to look to see if the user has a config clone and if so use it, otherwise use the default config which is part of my package. Now, while I could make my application edit the user's configuration files (there is a convention about where they're stored), it's generally not done, so I'd like to live with the constraints of the system I'm using if possible. And it's not just about discoverability either, one large concern is that the addition of a configuration key won't actually work as soon as the user has their own copy of the original template. Adding the key to the template won't make a difference as that file is never read. As such, I think this is actually quite a big flaw in the design of the configuration cascading system and thus needs to be taken up with my upstream. So, thinking about it, based on my constraints, I don't think there's going to be a good solution save for either editing the user's configuration or using a new config file every time there are updates to the default configuration. Even the release notes idea from above isn't doable as, if the user does not follow the advice, suddenly I have a config key with no value (user-defined or default). So the new question is this: what is the general way to solve the problem of having a default configuration in template config files and allowing a user to make user-specific version of these in order to override the defaults? A per-key cascade (rather than per-file cascade) where the user only specifies their overrides? In this case, what happens if a configuration value is an array - do we replace or append to the default (or, more realistically, how does the user specify whether they wish to replace or append to)? It seems like configuration is kinda hard, so how is it solved in the wild?

Read the article

Migrating Core Data to new UIManagedDocument in iOS 5

- by samerpaul

I have an app that has been on the store since iOS 3.1, so there is a large install base out there that still uses Core Data loaded up in my AppDelegate. In the most recent set of updates, I raised the minimum version to 4.3 but still kept the same way of loading the data. Recently, I decided it's time to make the minimum version 5.1 (especially with 6 around the corner), so I wanted to start using the new fancy UIManagedDocument way of using Core Data. The issue with this though is that the old database file is still sitting in the iOS app, so there is no migrating to the new document. You have to basically subclass UIManagedDocument with a new model class, and override a couple of methods to do it for you. Here's a tutorial on what I did for my app TimeTag. Step One: Add a new class file in Xcode and subclass "UIManagedDocument" Go ahead and also add a method to get the managedObjectModel out of this class. It should look like: @interface TimeTagModel : UIManagedDocument - (NSManagedObjectModel *)managedObjectModel; @end Step two: Writing the methods in the implementation file (.m) I first added a shortcut method for the applicationsDocumentDirectory, which returns the URL of the app directory. - (NSURL *)applicationDocumentsDirectory { return [[[NSFileManagerdefaultManager] URLsForDirectory:NSDocumentDirectoryinDomains:NSUserDomainMask] lastObject]; } The next step was to pull the managedObjectModel file itself (.momd file). In my project, it's called "minimalTime". - (NSManagedObjectModel *)managedObjectModel { NSString *path = [[NSBundlemainBundle] pathForResource:@"minimalTime"ofType:@"momd"]; NSURL *momURL = [NSURL fileURLWithPath:path]; NSManagedObjectModel *managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:momURL]; return managedObjectModel; } After that, I need to check for a legacy installation and migrate it to the new UIManagedDocument file instead. This is the overridden method: - (BOOL)configurePersistentStoreCoordinatorForURL:(NSURL *)storeURL ofType:(NSString *)fileType modelConfiguration:(NSString *)configuration storeOptions:(NSDictionary *)storeOptions error:(NSError **)error { // If legacy store exists, copy it to the new location NSURL *legacyPersistentStoreURL = [[self applicationDocumentsDirectory] URLByAppendingPathComponent:@"minimalTime.sqlite"]; NSFileManager* fileManager = [NSFileManagerdefaultManager]; if ([fileManager fileExistsAtPath:legacyPersistentStoreURL.path]) { NSLog(@"Old db exists"); NSError* thisError = nil; [fileManager replaceItemAtURL:storeURL withItemAtURL:legacyPersistentStoreURL backupItemName:niloptions:NSFileManagerItemReplacementUsingNewMetadataOnlyresultingItemURL:nilerror:&thisError]; } return [superconfigurePersistentStoreCoordinatorForURL:storeURL ofType:fileType modelConfiguration:configuration storeOptions:storeOptions error:error]; } Basically what's happening above is that it checks for the minimalTime.sqlite file inside the app's bundle on the iOS device. If the file exists, it tells you inside the console, and then tells the fileManager to replace the storeURL (inside the method parameter) with the legacy URL. This basically gives your app access to all the existing data the user has generated (otherwise they would load into a blank app, which would be disastrous). It returns a YES if successful (by calling it's [super] method). Final step: Actually load this database Due to how my app works, I actually have to load the database at launch (instead of shortly after, which would be ideal). I call a method called loadDatabase, which looks like this: -(void)loadDatabase { static dispatch_once_t onceToken; // Only do this once! dispatch_once(&onceToken, ^{ // Get the URL // The minimalTimeDB name is just something I call it NSURL *url = [[selfapplicationDocumentsDirectory] URLByAppendingPathComponent:@"minimalTimeDB"]; // Init the TimeTagModel (our custom class we wrote above) with the URL self.timeTagDB = [[TimeTagModel alloc] initWithFileURL:url]; // Setup the undo manager if it's nil if (self.timeTagDB.undoManager == nil){ NSUndoManager *undoManager = [[NSUndoManager alloc] init]; [self.timeTagDB setUndoManager:undoManager]; } // You have to actually check to see if it exists already (for some reason you can't just call "open it, and if it's not there, create it") if ([[NSFileManagerdefaultManager] fileExistsAtPath:[url path]]) { // If it does exist, try to open it, and if it doesn't open, let the user (or at least you) know! [self.timeTagDB openWithCompletionHandler:^(BOOL success){ if (!success) { // Handle the error. NSLog(@"Error opening up the database"); } else{ NSLog(@"Opened the file--it already existed"); [self refreshData]; } }]; } else { // If it doesn't exist, you need to attempt to create it [self.timeTagDBsaveToURL:url forSaveOperation:UIDocumentSaveForCreatingcompletionHandler:^(BOOL success){ if (!success) { // Handle the error. NSLog(@"Error opening up the database"); } else{ NSLog(@"Created the file--it did not exist"); [self refreshData]; } }]; } }); } If you're curious what refreshData looks like, it sends out a NSNotification that the database has been loaded: -(void)refreshData { NSNotification* refreshNotification = [NSNotificationnotificationWithName:kNotificationCenterRefreshAllDatabaseData object:self.timeTagDB.managedObjectContext userInfo:nil]; [[NSNotificationCenter defaultCenter] postNotification:refreshNotification]; } The kNotificationCenterRefreshAllDatabaseData is just a constant I have defined elsewhere that keeps track of all the NSNotification names I use. I pass the managedObjectContext of the newly created file so that my view controllers can have access to it, and start passing it around to one another. The reason we do this as a Notification is because this is being run in the background, so we can't know exactly when it finishes. Make sure you design your app for this! Have some kind of loading indicator, or make sure your user can't attempt to create a record before the database actually exists, because it will crash the app.

Read the article

C#/.NET Little Wonders: Getting Caller Information

- by James Michael Hare

Originally posted on: http://geekswithblogs.net/BlackRabbitCoder/archive/2013/07/25/c.net-little-wonders-getting-caller-information.aspx Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. There are times when it is desirable to know who called the method or property you are currently executing. Some applications of this could include logging libraries, or possibly even something more advanced that may server up different objects depending on who called the method. In the past, we mostly relied on the System.Diagnostics namespace and its classes such as StackTrace and StackFrame to see who our caller was, but now in C# 5, we can also get much of this data at compile-time. Determining the caller using the stack One of the ways of doing this is to examine the call stack. The classes that allow you to examine the call stack have been around for a long time and can give you a very deep view of the calling chain all the way back to the beginning for the thread that has called you. You can get caller information by either instantiating the StackTrace class (which will give you the complete stack trace, much like you see when an exception is generated), or by using StackFrame which gets a single frame of the stack trace. Both involve examining the call stack, which is a non-trivial task, so care should be done not to do this in a performance-intensive situation. For our simple example let's say we are going to recreate the wheel and construct our own logging framework. Perhaps we wish to create a simple method Log which will log the string-ified form of an object and some information about the caller. We could easily do this as follows: 1: static void Log(object message) 2: { 3: // frame 1, true for source info 4: StackFrame frame = new StackFrame(1, true); 5: var method = frame.GetMethod(); 6: var fileName = frame.GetFileName(); 7: var lineNumber = frame.GetFileLineNumber(); 8: 9: // we'll just use a simple Console write for now 10: Console.WriteLine("{0}({1}):{2} - {3}", 11: fileName, lineNumber, method.Name, message); 12: } So, what we are doing here is grabbing the 2nd stack frame (the 1st is our current method) using a 2nd argument of true to specify we want source information (if available) and then taking the information from the frame. This works fine, and if we tested it out by calling from a file such as this: 1: // File c:\projects\test\CallerInfo\CallerInfo.cs 2: 3: public class CallerInfo 4: { 5: Log("Hello Logger!"); 6: } We'd see this: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! This works well, and in fact CallStack and StackFrame are still the best ways to examine deeper into the call stack. But if you only want to get information on the caller of your method, there is another option… Determining the caller at compile-time In C# 5 (.NET 4.5) they added some attributes that can be supplied to optional parameters on a method to receive caller information. These attributes can only be applied to methods with optional parameters with explicit defaults. Then, as the compiler determines who is calling your method with these attributes, it will fill in the values at compile-time. These are the currently supported attributes available in the System.Runtime.CompilerServices namespace": CallerFilePathAttribute – The path and name of the file that is calling your method. CallerLineNumberAttribute – The line number in the file where your method is being called. CallerMemberName – The member that is calling your method. So let’s take a look at how our Log method would look using these attributes instead: 1: static int Log(object message, 2: [CallerMemberName] string memberName = "", 3: [CallerFilePath] string fileName = "", 4: [CallerLineNumber] int lineNumber = 0) 5: { 6: // we'll just use a simple Console write for now 7: Console.WriteLine("{0}({1}):{2} - {3}", 8: fileName, lineNumber, memberName, message); 9: } Again, calling this from our sample Main would give us the same result: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! However, though this seems the same, there are a few key differences. First of all, there are only 3 supported attributes (at this time) that give you the file path, line number, and calling member. Thus, it does not give you as rich of detail as a StackFrame (which can give you the calling type as well and deeper frames, for example). Also, these are supported through optional parameters, which means we could call our new Log method like this: 1: // They're defaults, why not fill 'em in 2: Log("My message.", "Some member", "Some file", -13); In addition, since these attributes require optional parameters, they cannot be used in properties, only in methods. These caveats aside, they do let you get similar information inside of methods at a much greater speed! How much greater? Well lets crank through 1,000,000 iterations of each. instead of logging to console, I’ll return the formatted string length of each. Doing this, we get: 1: Time for 1,000,000 iterations with StackTrace: 5096 ms 2: Time for 1,000,000 iterations with Attributes: 196 ms So you see, using the attributes is much, much faster! Nearly 25x faster in fact. Summary There are a few ways to get caller information for a method. The StackFrame allows you to get a comprehensive set of information spanning the whole call stack, but at a heavier cost. On the other hand, the attributes allow you to quickly get at caller information baked in at compile-time, but to do so you need to create optional parameters in your methods to support it. Technorati Tags: Little Wonders,CSharp,C#,.NET,StackFrame,CallStack,CallerFilePathAttribute,CallerLineNumberAttribute,CallerMemberName

Read the article

Centered Content using panelGridLayout

- by Duncan Mills

A classic layout conundrum, which I think pretty much every ADF developer may have faced at some time or other, is that of truly centered (centred) layout. Typically this requirement comes up in relation to say displaying a login type screen or similar. Superficially the problem seems easy, but as my buddy Eduardo explained when discussing this subject a couple of years ago it's actually a little more complex than you might have thought. If fact, even the "solution" provided in that posting is not perfect and suffers from a several issues (not Eduardo's fault, just limitations of panelStretch!) The top, bottom, end and start facets all need something in them The percentages you apply to the topHeight, startWidth etc. are calculated as part of the whole width. This means that you have to guestimate the correct percentage based on your typical screen size and the sizing of the centered content. So, at best, you will in fact only get approximate centering, and the more you tune that centering for a particular browser size the more it will fail if the user resizes. You can't attach styles to the panelStretchLayout facets so to provide things like background color or fixed sizing you need to embed another container that you can apply styles to, typically a panelgroupLayout For reference here's the code to print a simple 100px x 100px red centered square using the panelStretchLayout solution, approximately tuned to a 1980 x 1080 maximized browser (IDs omitted for brevity): <af:panelStretchLayout startWidth="45%" endWidth="45%" topHeight="45%" bottomHeight="45%" > <f:facet name="center"> <af:panelGroupLayout inlineStyle="height:100px;width:100px;background-color:red;" layout="vertical"/> </f:facet> <f:facet name="top"> <af:spacer height="1" width="1"/> </f:facet> <f:facet name="bottom"> <af:spacer height="1" width="1"/> </f:facet> <f:facet name="start"> <af:spacer height="1" width="1"/> </f:facet> <f:facet name="end"> <af:spacer height="1" width="1"/> </f:facet> </af:panelStretchLayout> And so to panelGridLayout So here's the good news, panelGridLayout makes this really easy and it works without the caveats above. The key point is that percentages used in the grid definition are evaluated after the fixed sizes are taken into account, so rather than having to guestimate what percentage will "more, or less", center the content you can just say "allocate half of what's left" to the flexible content and you're done. Here's the same example using panelGridLayout: <af:panelGridLayout> <af:gridRow height="50%"/> <af:gridRow height="100px"> <af:gridCell width="50%" /> <af:gridCell width="100px" halign="stretch" valign="stretch" inlineStyle="background-color:red;"> <af:spacer width="1" height="1"/> </af:gridCell> <af:gridCell width="50%" /> </af:gridRow> <af:gridRow height="50%"/> </af:panelGridLayout> So you can see that the amount of markup is somewhat smaller (as is, I should mention, the generated DOM structure in the browser), mainly because we don't need to introduce artificial components to ensure that facets are actually observed in the final result. But the key thing here is that the centering is no longer approximate and it will work as expected as the user resizes the browser screen. By far this is a more satisfactory solution and although it's only a simple example, it will hopefully open your eyes to the potential of panelGridLayout as your number one, go-to layout container. Just a reminder though, right now, panelGridLayout is only available in 11.1.2.2 and above.

Read the article

Android Bitmap : collision Detecting [on hold]

- by user2505374

I am writing an Android game right now and I would need some help in the collision of the wall on screen. When I drag the ball in the top and right it able to collide in wall but when I drag it faster it was able to overlap in the wall. public boolean onTouchEvent(MotionEvent event) { int x = (int) event.getX(); int y = (int) event.getY(); switch (event.getAction()) { // if the player moves case MotionEvent.ACTION_MOVE: { if (playerTouchRect.contains(x, y)) { boolean left = false; boolean right = false; boolean up = false; boolean down = false; boolean canMove = false; boolean foundFinish = false; if (x != pLastXPos) { if (x < pLastXPos) { left = true; } else { right = true; } pLastXPos = x; } if (y != pLastYPos) { if (y < pLastYPos) { up = true; } else { down = true; } pLastYPos = y; } plCellRect = getRectFromPos(x, y); newplRect.set(playerRect); newplRect.left = x - (int) (playerRect.width() / 2); newplRect.right = x + (int) (playerRect.width() / 2); newplRect.top = y - (int) (playerRect.height() / 2); newplRect.bottom = y + (int) (playerRect.height() / 2); int currentRow = 0; int currentCol = 0; currentRow = getRowFromYPos(newplRect.top); currentCol = getColFromXPos(newplRect.right); if(!canMove){ canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] == Cell.wall; canMove =true; } finishTest = mapManager.getCurrentTile().pMaze[currentRow][currentCol]; foundA = finishTest == Cell.valueOf(letterNotGet + ""); canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] != Cell.wall; canMove = (finishTest == Cell.floor || finishTest == Cell.pl) && canMove; if (canMove) { invalidate(); setTitle(); } if (foundA) { mapManager.getCurrentTile().pMaze[currentRow][currentCol] = Cell.floor; // finishTest letterGotten.add(letterNotGet); playCurrentLetter(); /*sounds.play(sExplosion, 1.0f, 1.0f, 0, 0, 1.5f);*/ foundS = letterNotGet == 's'; letterNotGet++; }if(foundS){ AlertDialog.Builder builder = new AlertDialog.Builder(mainActivity); builder.setTitle(mainActivity.getText(R.string.finished_title)); LayoutInflater inflater = mainActivity.getLayoutInflater(); View view = inflater.inflate(R.layout.finish, null); builder.setView(view); View closeButton =view.findViewById(R.id.closeGame); closeButton.setOnClickListener(new OnClickListener() { @Override public void onClick(View clicked) { if(clicked.getId() == R.id.closeGame) { mainActivity.finish(); } } }); AlertDialog finishDialog = builder.create(); finishDialog.show(); } else { Log.d(TAG, "INFO: updated player position"); playerRect.set(newplRect); setTouchZone(); updatePlayerCell(); } } // end of (CASE) if playerTouch break; } // end of (SWITCH) Case motion }//end of Switch return true; }//end of TouchEvent private void finish() { // TODO Auto-generated method stub } public int getColFromXPos(int xPos) { val = xPos / (pvWidth / mapManager.getCurrentTile().pCols); if (val == mapManager.getCurrentTile().pCols) { val = mapManager.getCurrentTile().pCols - 1; } return val; } /** * Given a y pixel position, return the row of the cell it is in This is * used when determining the type of adjacent Cells. * * @param yPos * y position in pixels * @return The cell this position is in */ public int getRowFromYPos(int yPos) { val = yPos / (pvHeight / mapManager.getCurrentTile().pRows); if (val == mapManager.getCurrentTile().pRows) { val = mapManager.getCurrentTile().pRows - 1; } return val; } /** * When preserving the position we need to know which cell the player is in, * so calculate it from the centre on its Rect */ public void updatePlayerCell() { plCell.x = (playerRect.left + (playerRect.width() / 2)) / (pvWidth / mapManager.getCurrentTile().pCols); plCell.y = (playerRect.top + (playerRect.height() / 2)) / (pvHeight / mapManager.getCurrentTile().pRows); if (mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] == Cell.floor) { for (int row = 0; row < mapManager.getCurrentTile().pRows; row++) { for (int col = 0; col < mapManager.getCurrentTile().pCols; col++) { if (mapManager.getCurrentTile().pMaze[row][col] == Cell.pl) { mapManager.getCurrentTile().pMaze[row][col] = Cell.floor; break; } } } mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] = Cell.pl; } } public Rect getRectFromPos(int x, int y) { calcCell.left = ((x / cellWidth) + 0) * cellWidth; calcCell.right = calcCell.left + cellWidth; calcCell.top = ((y / cellHeight) + 0) * cellHeight; calcCell.bottom = calcCell.top + cellHeight; Log.d(TAG, "Rect: " + calcCell + " Player: " + playerRect); return calcCell; } public void setPlayerRect(Rect newplRect) { playerRect.set(newplRect); } private void setTouchZone() { playerTouchRect.set( playerRect.left - playerRect.width() / TOUCH_ZONE, playerRect.top - playerRect.height() / TOUCH_ZONE, playerRect.right + playerRect.width() / TOUCH_ZONE, playerRect.bottom + playerRect.height() / TOUCH_ZONE); } public Rect getPlayerRect() { return playerRect; } public Point getPlayerCell() { return plCell; } public void setPlayerCell(Point cell) { plCell = cell; }

Read the article

jQuery Templates, Data Link

- by Renso

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Query Templates, Data Link, and Globalization I am sure you must have read Scott Guthrie’s blog post about jQuery support and officially supporting jQuery's templating, data linking and globalization, if not here it is: jQuery Templating Since we are an open source shop and use jQuery and jQuery plugins extensively to say the least, decided to look into the templating a bit and see what data linking is all about. For those not familiar with those terms here is the summary, plenty of material out there on what it is, but here is what in my experience it means: jQuery Templating: A templating engine that allows you to specify a client-side template where you indicate which properties/tags you want dynamically updated. You in a sense specify which parts of the html is dynamic and since it is pluggable you are able to use tools data jQuery data linking and others to let it sync up your template with data. What makes it more powerful is that you can easily work with rows of data, adding and removing rows. Once the template has been generated, which you do dynamically on a client-side event, you then append/inject the resulting template somewhere in your DOM, like for example you would get a JSON object from the database, map it to your template, it populates the template with your data in the indicated places, and then let’s say for example append it to a row in a table. I have not found it that useful for lets say a single record of data since you could easily just get a partial view from the server via an html type ajax call. It really shines when you dynamically add/remove rows from a list in the DOM. I have not found an alternative that meets the functionality of the jQuery template and helps of course that Microsoft officially supports it. In future versions of the jQuery plug-in it may even ship as part of the standard jQuery library and with future versions of Visual Studio. jQuery Data Linking: In short I was fascinated by it initially by how with one line of code I can sync up my JSON object with my form elements. That's where my enthusiasm stopped. It was one-line to let is deal with syncing up your form with your JSON object, but it is not bidirectional as they state and I tried all the work arounds they suggested and none of them work. The problem is that when you update your JSON object it DOES NOT sync it up with your form. In an example, accounts are being edited client side by selecting the account from a list by clicking on the row, it then fetches the entire account JSON object via ajax json-type call and then refreshes the form with the account’s details from the new JSON object. What is the use of syncing up my JSON with the form if I still have to programmatically sync up my new JSON object with each DOM property?! So you may ask: “what is the alternative”? Good question and the same one I was pondering, maybe I can just use it for keeping my from n sync with my JSON object so I can post that JSON object back to the server and update my database. That’s when I discovered Knockout: Knockout It addresses the issues mentioned above and also supports event handling through the observer pattern. Not wanting to go into detail here, Steve Sanderson, the creator of Knockout, has already done a terrific job of that, thanks Steve for a great plug-in! Best of all it integrates perfectly with the jQuery Templating engine as well. I have not found an alternative to this plugin that supports the depth and width of functionality and would recommend it to anyone. The only drawback is the embedded html attributes (data-bind=””) tags that you have to add to the HTML, in my opinion tying your behavior to your HTML, where I like to separate behavior from HTML as well as CSS, so the HTML is purely to define content, not styling or behavior. But there are plusses to this as well and also a nifty work around to this that I will just shortly mention here with an example. Instead of data binding an html tag with knockout event handling like so: <%=Html.TextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> Do: <%=Html.DataBoundTextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> The html extension above then takes care of the internals and you could then swap Knockout for something else if you want to inside the extension and keep the HTML plugin agnostic. Here is what the extension looks like, you can easily build a whole library to support all kinds of data binding options from this: public static class HtmlExtensions { public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, object value, object htmlAttributes) { var dic = new RouteValueDictionary(htmlAttributes); dic.Add("data-bind", String.Format("value: {0}", name)); return helper.TextBox(name, value, dic); } } Hope this helps in making a decision when and where to consider jQuery templating, data linking and Knockout.

Read the article

Using BizTalk to bridge SQL Job and Human Intervention (Requesting Permission)

- by Kevin Shyr

I start off the process with either a BizTalk Scheduler (http://biztalkscheduledtask.codeplex.com/releases/view/50363) or a manual file drop of the XML message. The manual file drop is to allow the SQL Job to call a "File Copy" SSIS step to copy the trigger file for the next process and allows SQL Job to be linked back into BizTalk processing. The Process Trigger XML looks like the following. It is basically the configuration hub of the business process <ns0:MsgSchedulerTriggerSQLJobReceive xmlns:ns0="urn:com:something something"> <ns0:IsProcessAsync>YES</ns0:IsProcessAsync> <ns0:IsPermissionRequired>YES</ns0:IsPermissionRequired> <ns0:BusinessProcessName>Data Push</ns0:BusinessProcessName> <ns0:EmailFrom>[email protected]</ns0:EmailFrom> <ns0:EmailRecipientToList>[email protected]</ns0:EmailRecipientToList> <ns0:EmailRecipientCCList>[email protected]</ns0:EmailRecipientCCList> <ns0:EmailMessageBodyForPermissionRequest>This message was sent to request permission to start the Data Push process. The SQL Job to be run is WeeklyProcessing_DataPush</ns0:EmailMessageBodyForPermissionRequest> <ns0:SQLJobName>WeeklyProcessing_DataPush</ns0:SQLJobName> <ns0:SQLJobStepName>Push_To_Production</ns0:SQLJobStepName> <ns0:SQLJobMinToWait>1</ns0:SQLJobMinToWait> <ns0:PermissionRequestTriggerPath>\\server\ETL-BizTalk\Automation\TriggerCreatedByBizTalk\</ns0:PermissionRequestTriggerPath> <ns0:PermissionRequestApprovedPath>\\server\ETL-BizTalk\Automation\Approved\</ns0:PermissionRequestApprovedPath> <ns0:PermissionRequestNotApprovedPath>\\server\ETL-BizTalk\Automation\NotApproved\</ns0:PermissionRequestNotApprovedPath> </ns0:MsgSchedulerTriggerSQLJobReceive> Every node of this schema was promoted to a distinguished field so that the values can be used for decision making in the orchestration. The first decision made is on the "IsPermissionRequired" field. If permission is required (IsPermissionRequired=="YES"), BizTalk will use the configuration info in the XML trigger to format the email message. Here is the snippet of how the email message is constructed. SQLJobEmailMessage.EmailBody = new Eai.OrchestrationHelpers.XlangCustomFormatters.RawString( MsgSchedulerTriggerSQLJobReceive.EmailMessageBodyForPermissionRequest + " " + "By moving the file, you are either giving permission to the process, or disapprove of the process." + " " + "This is the file to move: \"" + PermissionTriggerToBeGenereatedHere + "\" " + "(You may find it easier to open the destination folder first, then navigate to the sibling folder to get to this file)" + " " + "To approve, move(NOT copy) the file here: " + MsgSchedulerTriggerSQLJobReceive.PermissionRequestApprovedPath + " " + "To disapprove, move(NOT copy) the file here: " + MsgSchedulerTriggerSQLJobReceive.PermissionRequestNotApprovedPath + " " + "The file will be IMMEDIATELY picked up by the automated process. This is normal. You should receive a message soon that the file is processed." + " " + "Thank you!" ); SQLJobSendNotification(Microsoft.XLANGs.BaseTypes.Address) = "mailto:" + MsgSchedulerTriggerSQLJobReceive.EmailRecipientToList; SQLJobEmailMessage.EmailBody(Microsoft.XLANGs.BaseTypes.ContentType) = "text/html"; SQLJobEmailMessage(SMTP.Subject) = "Requesting Permission to Start the " + MsgSchedulerTriggerSQLJobReceive.BusinessProcessName; SQLJobEmailMessage(SMTP.From) = MsgSchedulerTriggerSQLJobReceive.EmailFrom; SQLJobEmailMessage(SMTP.CC) = MsgSchedulerTriggerSQLJobReceive.EmailRecipientCCList; SQLJobEmailMessage(SMTP.EmailBodyFileCharset) = "UTF-8"; SQLJobEmailMessage(SMTP.SMTPHost) = "localhost"; SQLJobEmailMessage(SMTP.MessagePartsAttachments) = 2; After the Permission request email is sent, the next step is to generate the actual Permission Trigger file. A correlation set is used here on SQLJobName and a newly generated GUID field. <?xml version="1.0" encoding="utf-8"?><ns0:SQLJobAuthorizationTrigger xmlns:ns0="somethingsomething"><SQLJobName>Data Push</SQLJobName><CorrelationGuid>9f7c6b46-0e62-46a7-b3a0-b5327ab03753</CorrelationGuid></ns0:SQLJobAuthorizationTrigger> The end user (the human intervention piece) will either grant permission for this process, or deny it, by moving the Permission Trigger file to either the "Approved" folder or the "NotApproved" folder. A parallel Listen shape is waiting for either response. The next set of steps decide how the SQL Job is to be called, or whether it is called at all. If permission denied, it simply sends out a notification. If permission is granted, then the flag (IsProcessAsync) in the original Process Trigger is used. The synchonous part is not really synchronous, but a loop timer to check the status within the calling stored procedure (for more information, check out my previous post: http://geekswithblogs.net/LifeLongTechie/archive/2010/11/01/execute-sql-job-synchronously-for-biztalk-via-a-stored-procedure.aspx) If it's async, then the sp starts the job and BizTalk sends out an email. And of course, some error notification: Footnote: The next version of this orchestration will have an additional parallel line near the Listen shape with a Delay built in and a Loop to send out a daily reminder if no response has been received from the end user. The synchronous part is used to gather results and execute a data clean up process so that the SQL Job can be re-tried. There are manu possibilities here.

Read the article

OBIA on Teradata - Part 1 Loader and Monitoring

- by Mohan Ramanuja

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The out-of-the-box (OOB) OBIA Informatica mappings come with TPump loader. TPUMP FASTLOAD TPump does not lock the table. FastLoad applies exclusive lock on the table. The table that TPump is loading can have data. The table that FastLoad is loading needs to be empty. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} TPump is not efficient with lookups. FastLoad is more efficient in the absence of lookups. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The out-of the box Informatica mappings come with TPump loader. There is chance for bottleneck in writer thread The out-of the box tables in Teradata supplied with OBAW features all Dimension and Fact tables using ROW_WID as the key for primary index. Also, all staging tables use integration_id as the key for primary index. This reduces skewing of data across Teradata AMPs.You can use an SQL statement similar to the following to determine if data for a given table is distributed evenly across all AMP vprocs. The SQL statement displays the AMP with the most used through the AMP with the least-used space, investigating data distribution in the Message table in database RST.SELECT vproc,CurrentPermFROM DBC.TableSizeWHERE Databasename = ‘PRJ_CRM_STGC’AND Tablename = ‘w_party_per_d’ORDER BY 2 descIf you suspect distribution problems (skewing) among AMPS, the following is a sample of what you might enter for a three-column PI:SELECT HASHAMP (HASHBUCKET (HASHROW (col_x, col_y, col_z))), count (*)FROM hash15GROUP BY 1ORDER BY 2 desc; ETL Error Monitoring Error Table – These are tables that start with ET. Location and name can be specified in Informatica session as well as the loader connection.Loader Log – Loader log is available in the Informatica server under the session log folder. These give feedback on the loader parameters such as Packing Factor to use. These however need to be monitored in the production environment. The recommendations made in one environment may not be used in another environment.Log Table – These are tables that start with TL. These are sparse on information.Bad File – This is the Informatica file generated in case there is data quality issues

Read the article

4 Ways Your Brand Can Jump From the Edge of Space

- by Mike Stiles

Can your brand’s social media content captivate the world and make it hold its collective breath? Can you put something on the screen that’s so compelling that your audience can’t look away? Will they want to make sure their friends see it so they can talk about it? If not, you’re probably not with Red Bull. I was impressed with Red Bull’s approach to social content even before Felix Baumgartner’s stunning skydive from the edge of space. And then they did this. According to Visible Measures, videos of the jump scored 50 million views in 4 days. 1,700 clips were generated from both official and organic sources. The live stream was the most watched YouTube Stream of all time (8 million concurrent viewers). The 2nd most watched live stream was…Felix’ first attempt Oct. 9. Are you ready to compete with that? I ask that question because some brands are still out there tying themselves up in knots about whether or not they should tweet. The public’s time and attention are scarce commodities, commodities they value greatly. The competition amongst brands for that time and attention is intense and going up like Felix’s capsule. If you still view your press releases as “content,” you won’t even be counted as being among the competition. Here are 5 lessons learned from Red Bull’s big leap: 1. They have a total understanding of their target market and audience. Not only do they have an understanding of it, they do something about it. They act on it. They fill the majority of their thoughts with what the audience wants. They hunger for wild applause from that audience. They want to do things that embrace the audience’s lifestyle and immerse in it so the target will identify the brand as “one of them.” Takeaway: BE your target market. 2. They deliver content that strikes the audience right where they emotionally live. If you want your content to have impact, you have to make your audience’s heart race, or make them tear up, or make them laugh. Label them “data points” all you want, but humans are emotional creatures. No message connects that’s not carried in on an emotion. Takeaway: You’re on the inside. If your content doesn’t make you say “wow,” it’s unlikely it will register with fans. 3. They put aside old school marketing and don’t let their content be degraded into a commercial. Their execs seem to understand the value in keeping a lid on the hard sell. So many brands just can’t bring themselves to disconnect advertising and social content. The result is, otherwise decent content gets contaminated with a desperation the viewer can smell a mile away. Think the Baumgartner skydive didn’t do Red Bull any good since he wasn’t drinking one on the way down while singing a jingle? Analysis company Taykey discovered that at the peak of the skydive buzz, about 1% of all online conversation was about the jump. Mentions of Red Bull constituted 1/3 of 1% of all Internet activity. Views of other Red Bull videos also shot up. Takeaway: Chill out with the ads. Your brand will get full credit for entertaining/informing fans in a relevant way, provided you do it. 4. They don’t hesitate to ask, “What can we do next”? Most corporate cultures are a virtual training facility for “we can’t do that.” Few are encouraged to innovate or think big, if think at all. Thinking big involves faith, and work. It means freedom and letting employees run a little wild with their ideas. There will always be the opportunity to let fear of everything that moves creep in and kill grand visions dead in their tracks. Experimenting must be allowed. Failure must be allowed. Red Bull didn’t think big. They thought mega. They tried to outdo themselves. Felix could have gone ahead and jumped halfway up, thinking, “This is still relatively high up. Good enough.” But that wouldn’t have left us breathless. Takeaway: Go for it. Jump. In putting up social properties and gathering fans of your brand, you’ve basically invited people to a party. A good host doesn’t just set out warm beer and stale chips because that’s inexpensive and easy. Be on the lookout for ways to make your guests walk away saying, “That was epic.”

Read the article

My rhythm game runs choppy even with high frame rate

- by felipedrl

I'm coding a rhythm game and the game runs smoothly with uncapped fps. But when I try to cap it around 60 the game updates in little chunks, like hiccups, as if it was skipping frames or at a very low frame rate. The reason I need to cap frame rate is because in some computers I tested, the fps varies a lot (from ~80 - ~250 fps) and those drops are noticeable and degrade response time. Since this is a rhythm game this is very important. This issue is driving me crazy. I've spent a few weeks already on it and still can't figure out the problem. I hope someone more experienced than me could shed some light on it. I'll try to put here all the hints I've tried along with two pseudo codes for game loops I tried, so I apologize if this post gets too lengthy. 1st GameLoop: const uint UPDATE_SKIP = 1000 / 60; uint nextGameTick = SDL_GetTicks(); while(isNotDone) { // only false when a QUIT event is generated! if (processEvents()) { if (SDL_GetTicks() > nextGameTick) { update(UPDATE_SKIP); render(); nextGameTick += UPDATE_SKIP; } } } 2nd Game Loop: const uint UPDATE_SKIP = 1000 / 60; while (isNotDone) { LARGE_INTEGER startTime; QueryPerformanceCounter(&startTime); // process events will return false in case of a QUIT event processed if (processEvents()) { update(frameTime); render(); } LARGE_INTEGER endTime; do { QueryPerformanceCounter(&endTime); frameTime = static_cast<uint>((endTime.QuadPart - startTime.QuadPart) * 1000.0 / frequency.QuadPart); } while (frameTime < UPDATE_SKIP); } [1] At first I thought it was a timer resolution problem. I was using SDL_GetTicks, but even when I switched to QueryPerformanceCounter, supposedly less granular, I saw no difference. [2] Then I thought it could be due to a rounding error in my position computation and since game updates are smaller in high FPS that would be less noticeable. Indeed there is an small error, but from my tests I realized that it is not enough to produce the position jumps I'm getting. Also, another intriguing factor is that if I enable vsync I'll get smooth updates @60fps regardless frame cap code. So why not rely on vsync? Because some computers can force a disable on gfx card config. [3] I started printing the maximum and minimum frame time measured in 1sec span, in the hope that every a few frames one would take a long time but still not enough to drop my fps computation. It turns out that, with frame cap code I always get frame times in the range of [16, 18]ms, and still, the game "does not moves like jagger". [4] My process' priority is set to HIGH (Windows doesn't allow me to set REALTIME for some reason). As far as I know there is only one thread running along with the game (a sound callback, which I really don't have access to it). I'm using AudiereLib. I then disabled Audiere by removing it from the project and still got the issue. Maybe there are some others threads running and one of them is taking too long to come back right in between when I measured frame times, I don't know. Is there a way to know which threads are attached to my process? [5] There are some dynamic data being created during game run. But It is a little bit hard to remove it to test. Maybe I'll have to try harder this one. Well, as I told you I really don't know what to try next. Anything, I mean, anything would be of great help. What bugs me more is why at 60fps & vsync enabled I get an smooth update and at 60fps & no vsync I don't. Is there a way to implement software vsync? I mean, query display sync info? Thanks in advance. I appreciate the ones that got this far and yet again I apologize for the long post. Best Regards from a fellow coder.

Read the article

ADF Reusable Artefacts

- by Arda Eralp

Primary reusable ADF Business Component: Entity Objects (EOs) View Objects (VOs) Application Modules (AMs) Framework Extensions Classes Primary reusable ADF Controller: Bounded Task Flows (BTFs) Task Flow Templates Primary reusable ADF Faces: Page Templates Skins Declarative Components Utility Classes Certain components will often be used more than once. Whether the reuse happens within the same application, or across different applications, it is often advantageous to package these reusable components into a library that can be shared between different developers, across different teams, and even across departments within an organization. In the world of Java object-oriented programming, reusing classes and objects is just standard procedure. With the introduction of the model-view-controller (MVC) architecture, applications can be further modularized into separate model, view, and controller layers. By separating the data (model and business services layers) from the presentation (view and controller layers), you ensure that changes to any one layer do not affect the integrity of the other layers. You can change business logic without having to change the UI, or redesign the web pages or front end without having to recode domain logic. Oracle ADF and JDeveloper support the MVC design pattern. When you create an application in JDeveloper, you can choose many application templates that automatically set up data model and user interface projects. Because the different MVC layers are decoupled from each other, development can proceed on different projects in parallel and with a certain amount of independence. ADF Library further extends this modularity of design by providing a convenient and practical way to create, deploy, and reuse high-level components. When you first design your application, you design it with component reusability in mind. If you created components that can be reused, you can package them into JAR files and add them to a reusable component repository. If you need a component, you may look into the repository for those components and then add them into your project or application. For example, you can create an application module for a domain and package it to be used as the data model project in several different applications. Or, if your application will be consuming components, you may be able to load a page template component from a repository of ADF Library JARs to create common look and feel pages. Then you can put your page flow together by stringing together several task flow components pulled from the library. An ADF Library JAR contains ADF components and does not, and cannot, contain other JARs. It should not be confused with the JDeveloper library, Java EE library, or Oracle WebLogic shared library. Reusable Component Description Data Control Any data control can be packaged into an ADF Library JAR. Some of the data controls supported by Oracle ADF include application modules, Enterprise JavaBeans, web services, URL services, JavaBeans, and placeholder data controls. Application Module When you are using ADF Business Components and you generate an application module, an associated application module data control is also generated. When you package an application module data control, you also package up the ADF Business Components associated with that application module. The relevant entity objects, view objects, and associations will be a part of the ADF Library JAR and available for reuse. Business Components Business components are the entity objects, view objects, and associations used in the ADF Business Components data model project. You can package business components by themselves or together with an application module. Task Flows & Task Flow Templates Task flows can be packaged into an ADF Library JAR for reuse. If you drop a bounded task flow that uses page fragments, JDeveloper adds a region to the page and binds it to the dropped task flow. ADF bounded task flows built using pages can be dropped onto pages. The drop will create a link to call the bounded task flow. A task flow call activity and control flow will automatically be added to the task flow, with the view activity referencing the page. If there is more than one existing task flow with a view activity referencing the page, it will prompt you to select the one to automatically add a task flow call activity and control flow. If an ADF task flow template was created in the same project as the task flow, the ADF task flow template will be included in the ADF Library JAR and will be reusable. Page Templates You can package a page template and its artifacts into an ADF Library JAR. If the template uses image files and they are included in a directory within your project, these files will also be available for the template during reuse. Declarative Components You can create declarative components and package them for reuse. The tag libraries associated with the component will be included and loaded into the consuming project. You can also package up projects that have several different reusable components if you expect that more than one component will be consumed. For example, you can create a project that has both an application module and a bounded task flow. When this ADF Library JAR file is consumed, the application will have both the application module and the task flow available for use. You can package multiple components into one JAR file, or you can package a single component into a JAR file. Oracle ADF and JDeveloper give you the option and flexibility to create reusable components that best suit you and your organization. You create a reusable component by using JDeveloper to package and deploy the project that contains the components into a ADF Library JAR file. You use the components by adding that JAR to the consuming project. At design time, the JAR is added to the consuming project's class path and so is available for reuse. At runtime, the reused component runs from the JAR file by reference.

Read the article

Using Unity – Part 4

- by nmarun

In this part, I’ll be discussing about constructor and property or setter injection. I’ve created a new class – Product3: 1: public class Product3 : IProduct 2: { 3: public string Name { get; set; } 4: [Dependency] 5: public IDistributor Distributor { get; set; } 6: public ILogger Logger { get; set; } 7: 8: public Product3(ILogger logger) 9: { 10: Logger = logger; 11: Name = "Product 1"; 12: } 13: 14: public string WriteProductDetails() 15: { 16: StringBuilder productDetails = new StringBuilder(); 17: productDetails.AppendFormat("{0} ", Name); 18: productDetails.AppendFormat("{0} ", Logger.WriteLog()); 19: productDetails.AppendFormat("{0} ", Distributor.WriteDistributorDetails()); 20: return productDetails.ToString(); 21: } 22: } This version has a property of type IDistributor and takes a constructor parameter of type ILogger. The IDistributor property has a Dependency attribute (Microsoft.Practices.Unity namespace) applied to it. IDistributor and its implementation are shown below: 1: public interface IDistributor 2: { 3: string WriteDistributorDetails(); 4: } 5: 6: public class Distributor : IDistributor 7: { 8: public List<string> DistributorNames = new List<string>(); 9: 10: public Distributor() 11: { 12: DistributorNames.Add("Distributor1"); 13: DistributorNames.Add("Distributor2"); 14: DistributorNames.Add("Distributor3"); 15: DistributorNames.Add("Distributor4"); 16: } 17: public string WriteDistributorDetails() 18: { 19: StringBuilder distributors = new StringBuilder(); 20: for (int i = 0; i < DistributorNames.Count; i++) 21: { 22: distributors.AppendFormat("{0} ", DistributorNames[i]); 23: } 24: return distributors.ToString(); 25: } 26: } ILogger and the FileLogger have the following definition: 1: public interface ILogger 2: { 3: string WriteLog(); 4: } 5: 6: public class FileLogger : ILogger 7: { 8: public string WriteLog() 9: { 10: return string.Format("Type: {0}", GetType()); 11: } 12: } The Unity container creates an instance of the dependent class (the Distributor class) within the scope of the target object (an instance of Product3 class that will be called by doing a Resolve<IProduct>() in the calling code) and assign this dependent object to the attributed property of the target object. To add to it, property injection is a form of optional injection of dependent objects.The dependent object instance is generated before the container returns the target object. Unlike constructor injection, you must apply the appropriate attribute in the target class to initiate property injection. Let’s see how to change the config file to make this work. The first step is to add all the type aliases: 1: <typeAlias alias="Product3" type="ProductModel.Product3, ProductModel"/> 2: <typeAlias alias="ILogger" type="ProductModel.ILogger, ProductModel"/> 3: <typeAlias alias="FileLogger" type="ProductModel.FileLogger, ProductModel"/> 4: <typeAlias alias="IDistributor" type="ProductModel.IDistributor, ProductModel"/> 5: <typeAlias alias="Distributor" type="ProductModel.Distributor, ProductModel"/> Now define mappings for these aliases: 1: <type type="ILogger" mapTo="FileLogger" /> 2: <type type="IDistributor" mapTo="Distributor" /> Next step is to define the constructor and property injection in the config file: 1: <type type="IProduct" mapTo="Product3" name="ComplexProduct"> 2: <typeConfig extensionType="Microsoft.Practices.Unity.Configuration.TypeInjectionElement, Microsoft.Practices.Unity.Configuration"> 3: <constructor> 4: <param name="logger" parameterType="ILogger" /> 5: </constructor> 6: <property name="Distributor" propertyType="IDistributor"> 7: <dependency /> 8: </property> 9: </typeConfig> 10: </type> There you see a constructor element that tells there’s a property named ‘logger’ that is of type ILogger. By default, the type of ILogger gets resolved to type FileLogger. There’s also a property named ‘Distributor’ which is of type IDistributor and which will get resolved to type Distributor. On the calling side, I’ve added a new button, whose click event does the following: 1: protected void InjectionButton_Click(object sender, EventArgs e) 2: { 3: unityContainer.RegisterType<IProduct, Product3>(); 4: IProduct product3 = unityContainer.Resolve<IProduct>(); 5: productDetailsLabel.Text = product3.WriteProductDetails(); 6: } This renders the following output: This completes the part for constructor and property injection. In the next blog, I’ll talk about Arrays and Generics. Please see the code used here.

Read the article

Developing Schema Compare for Oracle (Part 4): Script Configuration

- by Simon Cooper

If you've had a chance to play around with the Schema Compare for Oracle beta, you may have come across this screen in the synchronization wizard: This screen is one of the few screens that, along with the project configuration form, doesn't come from SQL Compare. This screen was designed to solve a couple of issues that, although aren't specific to Oracle, are much more of a problem than on SQL Server: Datatype conversions and NOT NULL columns. 1. Datatype conversions SQL Server is generally quite forgiving when it comes to datatype conversions using ALTER TABLE. For example, you can convert from a VARCHAR to INT using ALTER TABLE as long as all the character values are parsable as integers. Oracle, on the other hand, only allows ALTER TABLE conversions that don't change the internal data format. Essentially, every change that requires an actual datatype conversion has to be done using a rebuild with a conversion function. That's OK, as we can simply hard-code the various conversion functions for the valid datatype conversions and insert those into the rebuild SELECT list. However, as there always is with Oracle, there's a catch. Have a look at the NUMTODSINTERVAL function. As well as specifying the value (or column) to convert, you have to specify an interval_unit, which tells oracle how to interpret the input number. We can't hardcode a default for this parameter, as it is entirely dependent on the user's data context! So, in order to convert NUMBER to INTERVAL DAY TO SECOND/INTERVAL YEAR TO MONTH, we need to have feedback from the user as to what to put in this parameter while we're generating the sync script - this requires a new step in the engine action/script generation to insert these values into the script, as well as new UI to allow the user to specify these values in a sensible fashion. In implementing the engine and UI infrastructure to allow this it made much more sense to implement it for any rebuild datatype conversion, not just NUMBER to INTERVALs. For conversions which we can do, we pre-fill the 'value' box with the appropriate function from the documentation. The user can also type in arbitary SQL expressions, which allows the user to specify optional format parameters for the relevant conversion functions, or indeed call their own functions to convert between values that don't have a built-in conversion defined. As the value gets inserted as-is into the rebuild SELECT list, any expression that is valid in that context can be specified as the conversion value. 2. NOT NULL columns Another problem that is solved by the new step in the sync wizard is adding a NOT NULL column to a table. If the table contains data (as most database tables do), you can't just add a NOT NULL column, as Oracle doesn't know what value to put in the new column for existing rows - the DDL statement will fail. There are actually 3 separate scenarios for this problem that have separate solutions within the engine: Adding a NOT NULL column to a table without a rebuild Here, the workaround is to add a column default with an appropriate value to the column you're adding: ALTER TABLE tbl1 ADD newcol NUMBER DEFAULT <value> NOT NULL; Note, however, there is something to bear in mind about this solution; once specified on a column, a default cannot be removed. To 'remove' a default from a column you change it to have a default of NULL, hence there's code in the engine to treat a NULL default the same as no default at all. Adding a NOT NULL column to a table, where a separate change forced a table rebuild Fortunately, in this case, a column default is not required - we can simply insert the default value into the rebuild SELECT clause. Changing an existing NULL to a NOT NULL column To implement this, we run an UPDATE command before the ALTER TABLE to change all the NULLs in the column to the required default value. For all three, we need some way of allowing the user to specify a default value to use instead of NULL; as this is essentially the same problem as datatype conversion (inserting values into the sync script), we can re-use the UI and engine implementation of datatype conversion values. We also provide the option to alter the new column to allow NULLs, or to ignore the problem completely. Note that there is the same (long-running) problem in SQL Compare, but it is much more of an issue in Oracle as you cannot easily roll back executed DDL statements if the script fails at some point during execution. Furthermore, the engine of SQL Compare is far less conducive to inserting user-supplied values into the generated script. As we're writing the Schema Compare engine from scratch, we used what we learnt from the SQL Compare engine and designed it to be far more modular, which makes inserting procedures like this much easier.

Read the article

Application Composer: Exposing Your Customizations in BI Analytics and Reporting

- by Richard Bingham

Introduction This article explains in simple terms how to ensure the customizations and extensions you have made to your Fusion Applications are available for use in reporting and analytics. It also includes four embedded demo videos from our YouTube channel (if they don't appear check the browser address bar for a blocking shield icon). If you are new to Business Intelligence consider first reviewing our getting started article, and you can read more about the topic of custom subject areas in the documentation book Extending Sales. There are essentially four sections to this post. First we look at how custom fields added to standard objects are made available for reporting. Secondly we look at creating custom subject areas on the standard objects. Next we consider reporting on custom objects, starting with simple standalone objects, then child custom objects, and finally custom objects with relationships. Finally this article reviews how flexfields are exposed for reporting. Whilst this article applies to both Cloud/SaaS and on-premises deployments, if you are an on-premises developer then you can also use the BI Administration Tool to customize your BI metadata repository (the RPD) and create new subject areas. Whilst this is not covered here you can read more in Chapter 8 of the Extensibility Guide for Developers. Custom Fields on Standard Objects If you add a custom field to your standard object then it's likely you'll want to include it in your reports. This is very simple, since all new fields are instantly available in the "[objectName] Extension" folder in existing subject areas. The following two minute video demonstrates this. Custom Subject Areas for Standard Objects You can create your own subject areas for use in analytics and reporting via Application Composer. An example use-case could be to simplify the seeded subject areas, since they sometimes contain complex data fields and internal values that could confuse business users. One thing to note is that you cannot create subject areas in a sandbox, as it is not supported by BI, so once your custom object is tested and complete you'll need to publish the sandbox before moving forwards. The subject area creation processes is essentially two-fold. Once the request is submitted the ADF artifacts are generated, then secondly the related metadata is sent to the BI presentation server API's to make the updates there. One thing to note is that this second step may take up to ten minutes to complete. Once finished the status of the custom subject area request should show as 'OK' and it is then ready for use. Within the creation processes wizard-like steps there are three concepts worth highlighting: Date Flattening - this feature permits the roll up of reports at various date levels, such as data by week, month, quarter, or year. You simply check the box to enable it for that date field. Measures - these are your own functions that you can build into the custom subject area. They are related to the field data type and include min-max for dates, and sum(), avg(), and count() for numeric fields. Implicit Facts - used to make the BI metadata join between your object fields and the calculated measure fields. The advice is to choose the most frequently used measure to ensure consistency. This video shows a simple example, where a simplified subject area is created for the customer 'Contact' standard object, picking just a few fields upon which users can then create reports. Custom Objects Custom subject areas support three types of custom objects. First is a simple standalone custom object and for which the same process mentioned above applies. The next is a custom child object created on a standard object parent, and finally a custom object that is related to a parent object - usually through a dynamic choice list. Whilst the steps in each of these last two are mostly the same, there are differences in the way you choose the objects and their fields. This is illustrated in the videos below.The first video shows the process for creating a custom subject area for a simple standalone custom object. This second video demonstrates how to create custom subject areas for custom objects that are of parent:child type, as well as those those with dynamic-choice-list relationships. Flexfields Dynamic and Extensible Flexfields satisfy a similar requirement as custom fields (for Application Composer), with flexfields common across the Fusion Financials, Supply Chain and Procurement, and HCM applications. The basic principle is when you enable and configure your flexfields, in the edit page under each segment region (for both global and context segments) there is a BI Enabled check box. Once this is checked and you've completed your configuration, you run the Scheduled Process job named 'Import Oracle Fusion Data Extensions for Transactional Business Intelligence' to generate and migrate the related BI artifacts and data. This applies for dynamic, key, and extensible flexfields. Of course there is more to consider in terms of how you wish your flexfields to be implemented and exposed in your reports, and details are given in Chapter 4 of the Extending Applications guide.

Read the article

ADF Business Components

- by Arda Eralp

ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive. ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application

Read the article

The Best BPM Journey: More Exciting Destinations with Process Accelerators

- by Cesare Rotundo

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Open World (OOW) earlier this month has been a great occasion to discuss with our BPM customers. It was interesting to hear definite patterns emerging from those conversations: “BPM is a journey”, “experiences to share”, “our organization now understands what BPM is”, and my favorite (with some caveats): “BPM is like wine tasting, once you start, you want to try more”. These customers have started their journey, climbed up the learning curve, and reached a vantage point that allows them to see their next BPM destination. They see the next few processes they are going to tackle and improve with BPM. These processes/destinations target both horizontal processes where BPM replaces or coordinates manual activities, and critical industry processes that the company needs to improve to compete and deliver increasing value. Each new destination generates value, allowing the organization to reduce the cost of manual processes that were not supported by apps/custom development, and increase efficiency of end-to-end processes partially covered by apps/custom dev. The question we wanted to answer is how to help organizations experience deeper success with BPM, by increasing their awareness of the potential for reaching new targets, and equipping them with the right tools. We decided that we needed to identify destinations, and plot routes to show the fastest path to those destinations. In the end we want to enable customers to reach “Process Excellence”: continuously set new targets and consistently and efficiently reach them. The result is Oracle Process Accelerators (PA), solutions built using the rich functionality in Oracle BPM Suite. PAs offers a rapidly expanding list of exciting destinations. Our launch of the latest installment of Process Accelerators at Oracle Open World includes new Industry-focused solutions such as Public Sector Incident Reporting and Financial Services Loan Origination, and improved other horizontal PAs, including Travel Request Management, Document Routing and Approval, and Internal Service Requests. Just before OOW we had extended the Oracle deployment of Travel Request Management, riding the enthusiastic response from early adopters among travelers (employees), management and support (approvers). “Getting there first” means being among the first to extract value from the PA approach, while acquiring deeper insights into the customers’ perspective. This is especially noteworthy when it comes to PAs, a set of solutions designed to be quickly deployed and iteratively improved by customers. The OOW launch has generated immediate feedback from customers, non-customers, analysts, and partners. They all confirmed that both Business and IT at organizations benefit from PAs when it comes to exploring the potential for BPM to improve their business processes. PAs help customers visualize what can be done with BPM, and PAs are made to be extended: you can see your destination, change the path to fit your needs, and deploy. We're discovering new destinations/processes that the market wants us to support, generic enough across industries and within industries. We'll keep on building sets of requirements, deliver functional design, construct solutions using Oracle BPM, and test them not only functionally but for performance, scalability, clustering, making them robust, product-quality. Delivering BPM solutions with product-grade quality is the equivalent of following a tried-and-tested path on a map. Do you know of existing destinations in your industry? If yes, we can draw a path to innovative processes together.

Read the article

Multithreading in lwjgl getting rid of sleep.

- by pangaea

I'm trying to use multithreading in my game. However, I can't seem to get rid of the sleep. If I don't it's a blank screen, as there is no time for the computer to actually render the triangleMob as it can't access getArrayList(), in my main class I have a TriangleMob arraylist. If I delay it, then it can access the previousMob and it renders. If I don't, then it's blank screen. Can I get rid of the delay? Also, is this a bad way to multithread? Surely, this should be fast. I need multithreading so can you please not suggest not using it. public class TriangleMob extends Thread implements Runnable { private static int count=0; private int objectDisplayList; private static ArrayList<TriangleMob> previousMob = new ArrayList<TriangleMob>(); private static ArrayList<TriangleMob> currentMob = new ArrayList<TriangleMob>(); private static ArrayList<TriangleMob> laterMob = new ArrayList<TriangleMob>(); private Vector3f position = new Vector3f(0f,0f,0f); private Vector3f movement = new Vector3f(0f,0f,0f); public TriangleMob() { // Create the display list CreateDisplayList(); count++; } public TriangleMob(Vector3f position) { // Create the display list CreateDisplayList(); this.position = position; count++; } private void CreateDisplayList() { objectDisplayList = glGenLists(1); glNewList(objectDisplayList, GL_COMPILE); { double topPoint = 0.75; glBegin(GL_TRIANGLES); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -0.75, -4); glColor4f(0, 0, 1, 1f); glVertex3d(1, -.75, -4); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -4); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -6); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(1, -0.75, -6); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -.75, -6); glColor4f(1, 1, 0, 1f); glVertex3d(0, topPoint, -5); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -0.75, -6); glColor4f(0, 0, 1, 1f); glVertex3d(-1, -.75, -4); glEnd(); glColor4f(1, 1, 1, 1); } glEndList(); } public static int getCount() { return count; } public Vector3f getMovement() { return movement; } public Vector3f getPosition() { return position; } public synchronized int getObjectList() { return objectDisplayList; } public synchronized static ArrayList<TriangleMob> getArrayList(){ if(previousMob != null) { return previousMob; } previousMob.add(new TriangleMob()); return previousMob; } public synchronized void move(Vector3f movement) { // If you want to move in all 3 axis position.x += movement.x; position.y += movement.y; position.z += movement.z; } public synchronized void render() { glPushMatrix(); glTranslatef(-position.x, -position.y, -position.z); glCallList(objectDisplayList); glPopMatrix(); } public synchronized static void setTriangleMob(ArrayList<TriangleMob> triangleMobSet) { laterMob = triangleMobSet; } private synchronized void setPreTriangleMob(ArrayList<TriangleMob> currentMob2) { previousMob = currentMob2; } public void run(){ while(true) { if(laterMob == null) { currentMob = laterMob; System.out.println("Copying"); } for(int i=0; i<currentMob.size(); i++) { currentMob.get(i).move(new Vector3f(0.1f,0.01f,0.01f)); } setPreTriangleMob(currentMob); try { sleep(1L); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }

Read the article

How to make creating viewmodels at runtime less painfull

- by Mr Happy

I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painfull. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genious since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use an DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an indepth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

Read the article

Access Control Service: Handling Errors

- by Your DisplayName here!

Another common problem with external authentication is how to deal with sign in errors. In active federation like WS-Trust there are well defined SOAP faults to communicate problem to a client. But with web applications, the error information is typically generated and displayed on the external sign in page. The relying party does not know about the error, nor can it help the user in any way. The Access Control Service allows to post sign in errors to a specified page. You setup this page in the relying party registration. That means that whenever an error occurs in ACS, the error information gets packaged up as a JSON string and posted to the page specified. This way you get structued error information back into you application so you can display a friendlier error message or log the error. I added error page support to my ACS2 sample, which can be downloaded here. How to turn the JSON error into CLR types The JSON schema is reasonably simple, the following class turns the JSON into an object: [DataContract] public class AcsErrorResponse { [DataMember(Name = "context", Order = 1)] public string Context { get; set; } [DataMember(Name = "httpReturnCode", Order = 2)] public string HttpReturnCode { get; set; } [DataMember(Name = "identityProvider", Order = 3)] public string IdentityProvider { get; set; } [DataMember(Name = "timeStamp", Order = 4)] public string TimeStamp { get; set; } [DataMember(Name = "traceId", Order = 5)] public string TraceId { get; set; } [DataMember(Name = "errors", Order = 6)] public List<AcsError> Errors { get; set; } public static AcsErrorResponse Read(string json) { var serializer = new DataContractJsonSerializer( typeof(AcsErrorResponse)); var response = serializer.ReadObject( new MemoryStream(Encoding.Default.GetBytes(json))) as AcsErrorResponse; if (response != null) { return response; } else { throw new ArgumentException("json"); } } } [DataContract] public class AcsError { [DataMember(Name = "errorCode", Order = 1)] public string Code { get; set; } [DataMember(Name = "errorMessage", Order = 2)] public string Message { get; set; } } Retrieving the error information You then need to provide a page that takes the POST and deserializes the information. My sample simply fills a view that shows all information. But that’s for diagnostic/sample purposes only. You shouldn’t show the real errors to your end users. public class SignInErrorController : Controller { [HttpPost] public ActionResult Index() { var errorDetails = Request.Form["ErrorDetails"]; var response = AcsErrorResponse.Read(errorDetails); return View("SignInError", response); } } Also keep in mind that the error page is an anonymous page and that you are taking external input. So all the usual input validation applies.

Read the article

Grub won't boot windows after update from 11.10 to 12.04

- by Holger

thanks for your time and reading this, here's the deal: i upgraded from 11.10 to 12.04 and everything worked out until i rebooted, i had 11.10 sucessfully running as a dual boot with windows vista. when i rebooted, my GRUB was shot to hell, what ever option i selected it said partion not found or something similar... booting into a live version on a thumb drive and running bootrepair from there fixed the issue... but only for ubuntu, when i try to boot into windows it only goes back to GRUB. i'm not at home, and heres a list of what i have here with me... 1 4gb thumb drive, empty 1 8gb thumb drive, windows vista installer bootable 1 old laptop, the one i try to save, optical drive is not existent 2 Mbps internet connection can you help me get back into my windows without having to reinstall windows? or at least show me a way how to use my illustrator through a virtual machine or something? here's my grub cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e set locale_dir=($root)/boot/grub/locale set lang=de_DE insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, mit Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, mit Linux 3.2.0-24-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e echo 'Linux 3.2.0-24-generic wird geladen …' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, mit Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, mit Linux 3.0.0-19-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e echo 'Linux 3.0.0-19-generic wird geladen …' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 2C9E66B39E6674EC chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

Read the article

How can I estimate the entropy of a password?

- by Wug

Having read various resources about password strength I'm trying to create an algorithm that will provide a rough estimation of how much entropy a password has. I'm trying to create an algorithm that's as comprehensive as possible. At this point I only have pseudocode, but the algorithm covers the following: password length repeated characters patterns (logical) different character spaces (LC, UC, Numeric, Special, Extended) dictionary attacks It does NOT cover the following, and SHOULD cover it WELL (though not perfectly): ordering (passwords can be strictly ordered by output of this algorithm) patterns (spatial) Can anyone provide some insight on what this algorithm might be weak to? Specifically, can anyone think of situations where feeding a password to the algorithm would OVERESTIMATE its strength? Underestimations are less of an issue. The algorithm: // the password to test password = ? length = length(password) // unique character counts from password (duplicates discarded) uqlca = number of unique lowercase alphabetic characters in password uquca = number of uppercase alphabetic characters uqd = number of unique digits uqsp = number of unique special characters (anything with a key on the keyboard) uqxc = number of unique special special characters (alt codes, extended-ascii stuff) // algorithm parameters, total sizes of alphabet spaces Nlca = total possible number of lowercase letters (26) Nuca = total uppercase letters (26) Nd = total digits (10) Nsp = total special characters (32 or something) Nxc = total extended ascii characters that dont fit into other categorys (idk, 50?) // algorithm parameters, pw strength growth rates as percentages (per character) flca = entropy growth factor for lowercase letters (.25 is probably a good value) fuca = EGF for uppercase letters (.4 is probably good) fd = EGF for digits (.4 is probably good) fsp = EGF for special chars (.5 is probably good) fxc = EGF for extended ascii chars (.75 is probably good) // repetition factors. few unique letters == low factor, many unique == high rflca = (1 - (1 - flca) ^ uqlca) rfuca = (1 - (1 - fuca) ^ uquca) rfd = (1 - (1 - fd ) ^ uqd ) rfsp = (1 - (1 - fsp ) ^ uqsp ) rfxc = (1 - (1 - fxc ) ^ uqxc ) // digit strengths strength = ( rflca * Nlca + rfuca * Nuca + rfd * Nd + rfsp * Nsp + rfxc * Nxc ) ^ length entropybits = log_base_2(strength) A few inputs and their desired and actual entropy_bits outputs: INPUT DESIRED ACTUAL aaa very pathetic 8.1 aaaaaaaaa pathetic 24.7 abcdefghi weak 31.2 H0ley$Mol3y_ strong 72.2 s^fU¬5ü;y34G< wtf 88.9 [a^36]* pathetic 97.2 [a^20]A[a^15]* strong 146.8 xkcd1** medium 79.3 xkcd2** wtf 160.5 * these 2 passwords use shortened notation, where [a^N] expands to N a's. ** xkcd1 = "Tr0ub4dor&3", xkcd2 = "correct horse battery staple" The algorithm does realize (correctly) that increasing the alphabet size (even by one digit) vastly strengthens long passwords, as shown by the difference in entropy_bits for the 6th and 7th passwords, which both consist of 36 a's, but the second's 21st a is capitalized. However, they do not account for the fact that having a password of 36 a's is not a good idea, it's easily broken with a weak password cracker (and anyone who watches you type it will see it) and the algorithm doesn't reflect that. It does, however, reflect the fact that xkcd1 is a weak password compared to xkcd2, despite having greater complexity density (is this even a thing?). How can I improve this algorithm? Addendum 1 Dictionary attacks and pattern based attacks seem to be the big thing, so I'll take a stab at addressing those. I could perform a comprehensive search through the password for words from a word list and replace words with tokens unique to the words they represent. Word-tokens would then be treated as characters and have their own weight system, and would add their own weights to the password. I'd need a few new algorithm parameters (I'll call them lw, Nw ~= 2^11, fw ~= .5, and rfw) and I'd factor the weight into the password as I would any of the other weights. This word search could be specially modified to match both lowercase and uppercase letters as well as common character substitutions, like that of E with 3. If I didn't add extra weight to such matched words, the algorithm would underestimate their strength by a bit or two per word, which is OK. Otherwise, a general rule would be, for each non-perfect character match, give the word a bonus bit. I could then perform simple pattern checks, such as searches for runs of repeated characters and derivative tests (take the difference between each character), which would identify patterns such as 'aaaaa' and '12345', and replace each detected pattern with a pattern token, unique to the pattern and length. The algorithmic parameters (specifically, entropy per pattern) could be generated on the fly based on the pattern. At this point, I'd take the length of the password. Each word token and pattern token would count as one character; each token would replace the characters they symbolically represented. I made up some sort of pattern notation, but it includes the pattern length l, the pattern order o, and the base element b. This information could be used to compute some arbitrary weight for each pattern. I'd do something better in actual code. Modified Example: Password: 1234kitty$$$$$herpderp Tokenized: 1 2 3 4 k i t t y $ $ $ $ $ h e r p d e r p Words Filtered: 1 2 3 4 @W5783 $ $ $ $ $ @W9001 @W9002 Patterns Filtered: @P[l=4,o=1,b='1'] @W5783 @P[l=5,o=0,b='$'] @W9001 @W9002 Breakdown: 3 small, unique words and 2 patterns Entropy: about 45 bits, as per modified algorithm Password: correcthorsebatterystaple Tokenized: c o r r e c t h o r s e b a t t e r y s t a p l e Words Filtered: @W6783 @W7923 @W1535 @W2285 Breakdown: 4 small, unique words and no patterns Entropy: 43 bits, as per modified algorithm The exact semantics of how entropy is calculated from patterns is up for discussion. I was thinking something like: entropy(b) * l * (o + 1) // o will be either zero or one The modified algorithm would find flaws with and reduce the strength of each password in the original table, with the exception of s^fU¬5ü;y34G<, which contains no words or patterns.

Read the article

Local LINQtoSQL Database For Your Windows Phone 7 Application

- by Tim Murphy

There aren’t many applications that are of value without having some for of data store. In Windows Phone development we have a few options. You can store text directly to isolated storage. You can also use a number of third party libraries to create or mimic databases in isolated storage. With Mango we gained the ability to have a native .NET database approach which uses LINQ to SQL. In this article I will try to bring together the components needed to implement this last type of data store and fill in some of the blanks that I think other articles have left out. Defining A Database The first things you are going to need to do is define classes that represent your tables and a data context class that is used as the overall database definition. The table class consists of column definitions as you would expect. They can have relationships and constraints as with any relational DBMS. Below is an example of a table definition. First you will need to add some assembly references to the code file. using System.ComponentModel;using System.Data.Linq;using System.Data.Linq.Mapping; You can then add the table class and its associated columns. It needs to implement INotifyPropertyChanged and INotifyPropertyChanging. Each level of the class needs to be decorated with the attribute appropriate for that part of the definition. Where the class represents the table the properties represent the columns. In this example you will see that the column is marked as a primary key and not nullable with a an auto generated value. You will also notice that the in the column property’s set method It uses the NotifyPropertyChanging and NotifyPropertyChanged methods in order to make sure that the proper events are fired. [Table]public class MyTable: INotifyPropertyChanged, INotifyPropertyChanging{ public event PropertyChangedEventHandler PropertyChanged; private void NotifyPropertyChanged(string propertyName) { if(PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } public event PropertyChangingEventHandler PropertyChanging; private void NotifyPropertyChanging(string propertyName) { if(PropertyChanging != null) { PropertyChanging(this, new PropertyChangingEventArgs(propertyName)); } } private int _TableKey; [Column(IsPrimaryKey = true, IsDbGenerated = true, DbType = "INT NOT NULL Identity", CanBeNull = false, AutoSync = AutoSync.OnInsert)] public int TableKey { get { return _TableKey; } set { NotifyPropertyChanging("TableKey"); _TableKey = value; NotifyPropertyChanged("TableKey"); } } The last part of the database definition that needs to be created is the data context. This is a simple class that takes an isolated storage location connection string its constructor and then instantiates tables as public properties. public class MyDataContext: DataContext{ public MyDataContext(string connectionString): base(connectionString) { MyRecords = this.GetTable<MyTable>(); } public Table<MyTable> MyRecords;} Creating A New Database Instance Now that we have a database definition it is time to create an instance of the data context within our Windows Phone app. When your app fires up it should check if the database already exists and create an instance if it does not. I would suggest that this be part of the constructor of your ViewModel. db = new MyDataContext(connectionString);if(!db.DatabaseExists()){ db.CreateDatabase();} The next thing you have to know is how the connection string for isolated storage should be constructed. The main sticking point I have found is that the database cannot be created unless the file mode is read/write. You may have different connection strings but the initial one needs to be similar to the following. string connString = "Data Source = 'isostore:/MyApp.sdf'; File Mode = read write"; Using you database Now that you have done all the up front work it is time to put the database to use. To make your life a little easier and keep proper separation between your view and your viewmodel you should add a couple of methods to the viewmodel. These will do the CRUD work of your application. What you will notice is that the SubmitChanges method is the secret sauce in all of the methods that change data. private myDataContext myDb;private ObservableCollection<MyTable> _viewRecords;public ObservableCollection<MyTable> ViewRecords{ get { return _viewRecords; } set { _viewRecords = value; NotifyPropertyChanged("ViewRecords"); }}public void LoadMedstarDbData(){ var tempItems = from MyTable myRecord in myDb.LocalScans select myRecord; ViewRecords = new ObservableCollection<MyTable>(tempItems);}public void SaveChangesToDb(){ myDb.SubmitChanges();}public void AddMyTableItem(MyTable newScan){ myDb.LocalScans.InsertOnSubmit(newScan); myDb.SubmitChanges();}public void DeleteMyTableItem(MyTable newScan){ myDb.LocalScans.DeleteOnSubmit(newScan); myDb.SubmitChanges();} Updating existing database What happens when you need to change the structure of your database? Unfortunately you have to add code to your application that checks the version of the database which over time will create some pollution in your codes base. On the other hand it does give you control of the update. In this example you will see the DatabaseSchemaUpdater in action. Assuming we added a “Notes” field to the MyTable structure, the following code will check if the database is the latest version and add the field if it isn’t. if(!myDb.DatabaseExists()){ myDb.CreateDatabase();}else{ DatabaseSchemaUpdater dbUdater = myDb.CreateDatabaseSchemaUpdater(); if(dbUdater.DatabaseSchemaVersion < 2) { dbUdater.AddColumn<MyTable>("Notes"); dbUdater.DatabaseSchemaVersion = 2; dbUdater.Execute(); }} Summary This approach does take a fairly large amount of work, but I think the end product is robust and very native for .NET developers. It turns out to be worth the investment. del.icio.us Tags: Windows Phone,Windows Phone 7,LINQ to SQL,LINQ,Database,Isolated Storage

Search Results

Search found 8132 results on 326 pages for 'generated'.

Page 280/326 | < Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287 | Next Page >

- by Software Guy

- by Mr Happy

- by dimbo

- by alexrussell

- by samerpaul

- by James Michael Hare

- by Duncan Mills

- by user2505374

- by Renso

- by Kevin Shyr

- by Mohan Ramanuja

- by Mike Stiles

- by felipedrl

- by Arda Eralp

- by nmarun

- by Simon Cooper

- by Richard Bingham

- by Arda Eralp

- by Cesare Rotundo

- by pangaea

- by Mr Happy

- by Your DisplayName here!

- by Holger

- by Wug

- by Tim Murphy

< Previous Page | 276 277 278 279 280 281 282 283 284 285 286 287 | Next Page >