Search Results

Search found 31165 results on 1247 pages for 'coin change'.

Page 281/1247 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Cannot get temperatures in Dell Studio 1558

  - by Athul Iddya

  I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

  Read the article

• Failed to load session gnome-fallback, after messing with metacity

  - by Carlito

  I am using Ubuntu 12.04 with gnome-session-fallback (Gnome Classic in the login menu). I wanted to remove window borders from metacity and stumbled across this post which basically changes window->mwm_decorated from TRUE to FALSE, which should remove the window borders in metacity. I know that it is also possible to change your GTK theme to one without window borders, but I wanted to try this solution. So I downloaded the source from my current metacity version (2.34.1) and changed that row. After compiling (./configure && make) I ran checkinstall which generates a .deb file from the source (had to change the version a bit to match the current one exactly). But after installing and loging out and back in, I couldn't load Gnome Classic. I get the error Failed to load session gnome-fallback. I could reinstall the old metacity which was still saved in /var/cache/apt/archives/, so everything is back where it was before. But I would like to mess around with metacity. Have I installed it correctly or did I forgot something? Are there any log files that I should check for solving this error? Thanks in advance!

  Read the article

• Using Behavior Trees and Events together

  - by weichsem

  I am beginning to work with behavior trees and am unsure how events should be handled within the tree. Lets say we have a space game where the player is dogfighting with a handful of other ships, some friendly some not. The player destroys a ship and the rest of the hostile ships should then start to retreat. How was should the shipWasDestroyed event effect the other ship's behavior trees so that they start running the retreat behavior? One way I could think of doing this is have all the conditions I care about be high level nodes that effectively state change the ship. This would mean I'd have to check all of these state change conditions on every frame the behavior tree was run, even if they are very rare occurrences. I'd prefer not doing this for performance and complexity reasons. From looking at the Halo papers on behavior trees it seems that they handled this by dynamically placing nodes into the tree when the event occurred. It seems like calculating where the new node should go could be problematic depending on the current state of the running behavior. How is this normally handled?

  Read the article

• Refactoring and Open / Closed principle

  - by Giorgio

  I have recently being reading a web site about clean code development (I do not put a link here because it is not in English). One of the principles advertised by this site is the Open Closed Principle: each software component should be open for extension and closed for modification. E.g., when we have implemented and tested a class, we should only modify it to fix bugs or to add new functionality (e.g. new methods that do not influence the existing ones). The existing functionality and implementation should not be changed. I normally apply this principle by defining an interface I and a corresponding implementation class A. When class A has become stable (implemented and tested), I normally do not modify it too much (possibly, not at all), i.e. If new requirements arrive (e.g. performance, or a totally new implementation of the interface) that require big changes to the code, I write a new implementation B, and keep using A as long as B is not mature. When B is mature, all that is needed is to change how I is instantiated. If the new requirements suggest a change to the interface as well, I define a new interface I' and a new implementation A'. So I, A are frozen and remain the implementation for the production system as long as I' and A' are not stable enough to replace them. So, in view of these observation, I was a bit surprised that the web page then suggested the use of complex refactorings, "... because it is not possible to write code directly in its final form." Isn't there a contradiction / conflict between enforcing the Open / Closed Principle and suggesting the use of complex refactorings as a best practice? Or the idea here is that one can use complex refactorings during the development of a class A, but when that class has been tested successfully it should be frozen?

  Read the article

• Ways to organize interface and implementation in C++

  - by Felix Dombek

  I've seen that there are several different paradigms in C++ concerning what goes into the header file and what to the cpp file. AFAIK, most people, especially those from a C background, do: foo.h class foo { private: int mem; int bar(); public: foo(); foo(const foo&); foo& operator=(foo); ~foo(); } foo.cpp #include foo.h foo::bar() { return mem; } foo::foo() { mem = 42; } foo::foo(const foo& f) { mem = f.mem; } foo::operator=(foo f) { mem = f.mem; } foo::~foo() {} int main(int argc, char *argv[]) { foo f; } However, my lecturers usually teach C++ to beginners like this: foo.h class foo { private: int mem; int bar() { return mem; } public: foo() { mem = 42; } foo(const foo& f) { mem = f.mem; } foo& operator=(foo f) { mem = f.mem; } ~foo() {} } foo.cpp #include foo.h int main(int argc, char* argv[]) { foo f; } // other global helper functions, DLL exports, and whatnot Originally coming from Java, I have also always stuck to this second way for several reasons, such as that I only have to change something in one place if the interface or method names change, that I like the different indentation of things in classes when I look at their implementation, and that I find names more readable as foo compared to foo::foo. I want to collect pro's and con's for either way. Maybe there are even still other ways? One disadvantage of my way is of course the need for occasional forward declarations.

  Read the article

• PowerShell a constant in a changing world

  - by Rob Addis

  I've been programming for about 20 years now some of my friends have been at it for over 30. I have read many, many manuals and yes it's not my favourite past time. So 10 years ago I made a promise to myself to try and only learn about products which have long life times. I immediately gave up programming GUIs and concentrated on back end development as I decided that these products (Oracle, MQ Series, SQL Server, BizTalk and later WCF, WF) have longer life times and smaller incremental changes than front end products.10 years ago I had no idea how good a decision that would turn out to be. There have been so many different Microsoft products for the front end in that time; multiple versions of Windows Forms, FrontPage, Html, Javascript, ASP.net, Silverlight, SharePoint, WPF and now hopefully a stayer Metro.I remember being at a Microsoft conference in 2006 when Martin Fowler told a crowd of developers (I'm paraphrasing) "If you don't like change then you're in the wrong business!". Well I've been in the business for 20 years and yes I'm a little resistant to change. I like my investment in reading manuals and getting certified to be time well spent!Over the last 2 years I have been writing A LOT of PowerShell script, I think there is a good chance this product will still be around and be used for new development in 10 years, learning it is a good investment.

  Read the article

• Wordpress blog penalized by Google search - what's wrong?

  - by pawelbrodzinski

  I have a blog (http://blog.brodzinski.com), which is wordpress.org blog with pretty popular Thesis theme with almost no other customizations. Some time ago it was penalized by Google search - it simply stopped appearing in search results even for search terms it used to be top result, like my name - Pawel Brodzinski - which isn't anything close to popular search term. To be exact the site has been penalized on Nov 18. It started popping up in search result on Dec 23 but only for a few days. Since Dec 27 it is out again. I know Google guidelines and I'm not aware to break any of them. I submitted reconsideration request after I noticed penalty. It was proceeded and there was no change whatsoever (no surprise as it seems the site was penalized again). I checked diagnostics in webmaster tools and neither any malware was detected nor any strange search terms popped up. I read related threads on Google webmasters forum but found none of solutions working for me. I posted a thread on Google webmasters forum (http://www.google.com/support/forum/p/Webmasters/thread?tid=546339f49d4a03bc&hl=en) and the only answer I got was to check for duplicate content. Well, there is some duplicate content published on the web but it is true for vast majority of blogs and it doesn't seem to be a reason for a penalty. Also before Dec 27 I was able to remove duplicate content from a couple of sites which were republishing my feed but this doesn't change the situation - the site was penalized again. The problem is I have no idea what can be wrong with the website or how to find it out. To make the problem worse I'm no webmaster, I just run a wordpress blog, which supposed to be easy.

  Read the article

• Unresponsive Script window pops up all the time now. Why and what to do?

  - by Christopher Jewell

  I don't know that it's for the exact same script each time, it may be. A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://messenger/content/folderPane.js:721 This is in association with Thunderbird I think. This doesn't just happen after I've stepped away for a long time. It happens every time I click on anything. Things keep running that I'm clicking on. Just before this started as a constant problem, I was looking at addons etc, and something in Thunderbird deactivated an old or expired JavaScript. I clicked on the update for that and after a while I found the best choice on the list and clicked download. I don't know that anything happened with that and I moved away from addons etc area. The unresponsive script window started coming back all the time. Every time I clicked on something in Thunderbird and sometimes with Firefox. I turned off Firefox and restarted, but it didn't change. Shut down Firefox and computer restarted didn't change. The unresponsive script window is persistent now.

  Read the article

• Spring + JSR 303 Validation group is ignored [closed]

  - by nsideras

  we have a simple bean with JSR annotations public class CustomerDTO { private static final long serialVersionUID = 1L; private Integer id; @NotEmpty(message = "{customer.firstname.empty}") private String firstName; @NotEmpty(message = "{customer.lastname.empty}") private String lastName; @NotEmpty(groups={PasswordChange.class}, message="{password.empty}") private String password; @NotEmpty(groups={PasswordChange.class}, message="{confirmation.password.empty}") private String password2; } and we have a Spring Controller @RequestMapping(value="/changePassword", method = RequestMethod.POST) public String changePassword(@Validated({ PasswordChange.class }) @ModelAttribute("customerdto") CustomerDTO customerDTO, BindingResult result, Locale locale) { logger.debug("Change Password was submitted with information: " + customerDTO.toString()); try { passwordStrengthPolicy.checkPasswordStrength(locale, customerDTO.getPassword()); if (result.hasErrors()) { return "changePassword"; } logger.debug("Calling customer service changePassword: " + customerDTO); customerOnlineNewService.changePassword(customerDTO); } catch (PasswordNotChangedException e) { logger.error("Could not change password PasswordNotChangedException: " + customerDTO.toString()); return "changePassword"; } catch (PasswordNotSecureException e) { return "changePassword"; } return createRedirectViewPath("changePassword"); } Our problem is that when changePassword is invoked the validator ignores the group(PasswordChange.class) and validates only firstName and lastName which are not in the group. Any idea? Thank you very much for your time.

  Read the article

• When to use each user research method

  - by user12277104

  There are a lot of user research methods out there, but sometimes we get stuck in a rut, conducting all formative usability testing before coding, or running surveys to gather satisfaction data. I'll be the first to admit that it happens to me, but to get out of a rut, it just takes a minute to look at where I am in the design & development cycle, what kind(s) of data I need, and what methods are available to me. We need reminders, or refreshers, every once in a while. One tool I've found useful is a graphic organizer that I created many years ago. It's been through several revisions, as I've adapted it to the product cycles of the places I've worked, changed my mind about how to categorize it, and added methods that I've used or created over time. I shared a version of this table at the 2012 International UPA conference, and I was contacted by someone yesterday who wanted to use it in a university course on user-center design. I was flattered at the the thought, but embarrassed, because I was sure it needed updating -- that was a year ago, after all. But I opened it today, and really, there's not much I'd change -- sure, I could add some nuance regarding what types of formative testing, such as modality (remote, unmoderated remote, or in-person) or flavor of testing (RITE, RITE-Krug, comparative, performance), but I think it's pretty much ok as is. Click on the image below, to get the full-size PDF. And whether it's entirely "right" or "wrong" isn't the whole value of looking at these methods across the product lifecycle. The real value lies in the reminder that I have options. And what those options are change as the field changes, so while I don't expect this graphic to have an eternal shelf life, it's still ok a year after I last updated it. That said, if you find something missing or out of place, let me know :) 

  Read the article

• Essbase - FormatString

  - by THE

  A look at the documentation for "Typed Measures" shows:"Using format strings, you can format the values (cell contents) of Essbase database members in numeric type measures so that they appear, for query purposes, as text, dates, or other types of predefined values. The resultant display value is the cell’s formatted value (FORMATTED_VALUE property in MDX). The underlying real value is numeric, and this value is unaffected by the associated formatted value."To actually switch ON the use of typed measures in general, you need to navigate to the outline properties: open outline select properties change "Typed Measures enable" to TRUE (click to enlarge) As an example, I created two additional members in the ASOSamp outline. - A member "delta Price" in the Measures (Accounts) Dimension with the Formula: ([Original Price],[Curr_year])-([Original Price],[Prev_year])This is equivalent to the Variance Formula used in the "Years" Dimension. - A member "Var_Quickview" in the "Years" Dimension with the same formula as the "Variance" Member.This will be used to simply display a second cell with the same underlying value as Variance - but formatted using Format String hence enabling BOTH in the same report. (click to enlarge) In the outline you now select the member you want the Format String associated with and change the "associated Format String" in the Member Properties.As you can see in this example an IIF statement reading:MdxFormat(IIF(CellValue()< 0,"Negative","Positive" ) ) has been chosen for both new members.After applying the Format String changes and running a report via SmartView, the result is: (click to enlarge) reference: Essbase Database Admin Guide ,Chapter 12 "Working with Typed Measures "

  Read the article

• Designing business objects, and gui actions

  - by fozz

  Developing a product ordering system using Java SE 6. The previous implementations used combo boxes, text fields, and check boxes. Preforming validation on action events from the GUI. The validation includes limiting existing combo boxes items, or even availability. The issue in the old system was that the action was received and all rules were applied to the entire business object. This resulted in a huge event change as options were changed multiple times. To be honest I have no idea how an infinite loop wasn't produced. Through the next iteration I stepped in and attempted to limit the chaos by controlling the order in which the selections could be made. Making configuration of BO's a top down approach. I implemented custom box models, action events, beans/binding, and an MVC pattern. However I still am unable to fully isolate action even chains. I'm thinking that I've approached the whole concept backwards in an attempt to stay closest to what was already in place. So the question becomes what do I design instead? I'm currently considering an implementation of Interfaces, Beans, Property Change Listeners to manage the back and forth. Other thoughts were validation exceptions, dynamic proxies.... I'm sure there are a ton of different ways. To say that one way is right is crazy, and I'm sure it will take a blending of multiple patterns. My knowledge of swing/awt validation is limited, previously I did backend logic only. Other considerations are were some sort of binding(jgoodies or otherwise) to directly bind GUI state to BO's.

  Read the article

• Is it necessary to add an HP printer to CUPS using the hplip URI?

  - by JPbuntu

  I recently setup a CUPS print server (Ubuntu server 12.04) and I having trouble with performance of a HP Color LaserJet Printer CP3505n. The printer pauses for about a second between printing each page, which is annoying when there is a lot of printing to be done. This doesn't happen when the printer is installed directly to a Windows client. In an attempt to fix this I have setup the printer a couple different ways. I decided not to do a Samba share since this wiki said IPP is preferred. First Method Added to HP LaserJet to CUPS as a Discovered Network Printer, and selected HP Color LaserJet cp3505 hpijs pcl3, 3.12.2 (en) driver. I did not use a hplip URI. Second Method (hplip URI) I thought adding hplip to the mix might improve the performance, so I added the printer like this: Ran hp-setup -m 192.168.2.60, prompted to select driver Selected HP Color LaserJet cp3505 hpijs pcl3, 3.12.2 (en) Used hplip to generate a URI: hp-makeuri 192.168.2.60 Then added the printer to CUPS as a Local Printer: HP Printer (HPLIP), and entered: hp:/net/HP_Color_LaserJet_CP3505?ip=192.168.2.60. Either method I use I am able to share the printer on the network by adding a printer as http://192.168.2.2:631/printers/HP_LASER-TERRAC. Does it make a difference which way the printer is added cups? If so, and I install the printer with the hp URI, can I still change the driver using the CUPS web interface? I have been trying out different drivers to try and improve performance, and the cups interface is the easiest way to change them. Thanks in advance.

  Read the article

• Could not load file or assembly 'System.Data.SQLite' or one of its dependencies. An attempt was made to load a program with an incorrect format.

  - by Om Talsania

  Problem Description: Could not load file or assembly 'System.Data.SQLite' or one of its dependencies. An attempt was made to load a program with an incorrect format. Likely to be reproduced when: You will usually encounter this problem when you have downloaded a sample application that is a 32-bit application targeted for ASP.NET 2.0 or 3.5, and you have IIS7 on a 64-bit OS running .NET 4.0, because the default setting for running 32-bit application on IIS7 with 64-bit OS is false. Resolution: 1. Go to IIS Management Console Start -> Administration Tools -> Internet Information Services (IIS) Manager 2. Expand your server in the left pane and go to Application Pools 3. Right click to select ‘Add Application Pool’  4. Create anew AppPool. I have named it ASP.NET v2.0 AppPool (32-bit) and selected .NET Framework v2.0.50727 because I intend to run my ASP.NET 3.5 application on it. 5. Now right click the newly created AppPool and select Advanced Settings 6. Change the property “Enable 32-Bit Applications” from False to True  7. Now select your actual web application from the left panel. Right click the web application, and go to Manage Application -> Advanced Settings  8. Change the Property “Application Pool” to your newly created AppPool.  And… the error is gone…

  Read the article

• ADF Faces Skin Editor - How to Work with It

  - by Shay Shmeltzer

  The ODTUG Kscop11 conference was a great success with lots of sessions about FMW running in a special track. I did several sessions and labs in the conference, and I thought it might be a good idea to at least give you a taste of what you might have missed. So here is most of what I demoed in my ADF Faces Skinning session (not all though - that session was 60 minutes long, and while everyone did end up going out of the building in the middle because of a fire drill for about 5 minutes, there was other things covered in the session as well). In the demo here you'll see how to generate new images and default color scheme, how to identify a component class with Firebug, how to skin a component, how to identify the global selector of a property, how to change fonts and how to change strings. By the way, for more on ADF Skinning you should also listen to the ADF Insider seminar that Frank Nimphius recorded on skinning, it will give you better understanding of the overall skinning process. P.S. in the demo I add an entry to the web.xml file which prevent ADF Faces from compressing the HTML that is generated. The entry is for org.apache.myfaces.trinidad.DISABLE_CONTENT_COMPRESSION  and I set it to true. This is very useful when you work on creating the skin, but don't forget to un-set it before you go production.

  Read the article

• What can be the cause of new bugs appearing somewhere else when a known bug is solved?

  - by MainMa

  During a discussion, one of my colleagues told that he has some difficulties with his current project while trying to solve bugs. "When I solve one bug, something else stops working elsewhere", he said. I started to think about how this could happen, but can't figure it out. I have sometimes similar problems when I am too tired/sleepy to do the work correctly and to have an overall view of the part of the code I was working on. Here, the problem seems to be for a few days or weeks, and is not related to the focus of my colleague. I can also imagine this problem arising on a very large project, very badly managed, where teammates don't have any idea of who does what, and what effect on other's work can have a change they are doing. This is not the case here neither: it's a rather small project with only one developer. It can also be an issue with old, badly maintained and never documented codebase, where the only developers who can really imagine the consequences of a change had left the company years ago. Here, the project just started, and the developer doesn't use anyone's codebase. So what can be the cause of such issue on a fresh, small-size codebase written by a single developer who stays focused on his work? What may help? Unit tests (there are none)? Proper architecture (I'm pretty sure that the codebase has no architecture at all and was written with no preliminary thinking), requiring the whole refactoring? Pair programming? Something else?

  Read the article

• Release notes for 9/25/2012

  Below are the release notes from today's deployment. 1. With today’s deployment we’ve made some significant changes to the source code experience. First of all, you’ll noticed that we moved the Source Code tab closer to the project home tab.   We believe that this will help make source code more discoverable and emphasizes our focus on developer collaboration. The next thing you’ll notice is that when you click on the Source Code tab, you will immediately be browsing code. We want to get you to the project source code in a minimum number of clicks, and this change helps get you there. The changeset history is still there, which brings us to the next change… We implemented an action bar in the source code section, which will make certain actions more discoverable, including forking, cloning, and downloading source code The popups in the action bar will help you perform the tasks you need to do when contributing to projects, as well as managing your own projects. Take a look at how easy it is to find the clone/connection URL now! 2. The second exciting thing we turned on this week is the ability to enable Windows Azure Web Sites to build and deploy your project source code (for Git source code projects). You can read more about how to do this in Mark's post here. 3. We also made some improvements in other areas this week: Made some improvements to screen reader accessibility Fixed some minor UI issues in the browse source code page We'd love to have your feedback on the new changes to the source code tab. Please let us know what you think on our suggestions page, send us a message on Twitter @codeplex, or you can reach Mark Groves directly @mgroves84

  Read the article

• How do you convince the client their application's backend needs a rewrite?

  - by Richard DesLonde

  I have been supporting a LOB winforms application for a client the last 3 years. The application is built with a simple monolithic architecture and uses .NET 2.0. The application is a core part of their operations and its longevity is paramount. It needs to evolve with their evolving business processes, as well as implement improved functionality etc....this brings me to believe that this application needs an overhaul of sorts on the back-end. The problem is changing a back-end is "invisible"...i.e. the user never actually sees it. It's a quality of the system that is changing (stability, maintainability, reliability, longevity), not some functional requirement that will be easily seen...i.e. the ROI is not obvious. There is a lot of new functionality to be added to the front-end as well (user experience). I am considering a strategy of changing the back-end over time...i.e. when making a change or adding a feature to the front-end, change those components in the back-end that are affected, eventually you get to everything. How do I convince the client that we need to rebuild the back-end?

  Read the article

• What are some good seminar topics that can be used to improve designer&developer communication?

  - by tactoth

  Hello guys the thing I'll tell is what happens in the company I work for but I know it's more like a common issue in software companies. I'm development team leader in a internet service company that provides service that's very similar to dropbox. In our company we have mainly two divisions: the tech division and the designers division, both have their own reporting hierarchy. Designers focus on designing UI and prioritizing features, while developers focus on implement designers' ideas (more like being driven as our big boss has said). Then here comes our issue: the DEV team and DES team communicate very bad. DEV complain DES for these reasons: Too frequent changing of requirements Too complicated interaction (our DEV team has actually learned many HCI principles) Documents for design are incomplete, usually you just get 'design principles' and it's up to DEV to complete design details. When you find design defects, you ask DES team to resolve them, then DES team quickly change the principles and you gonna spend another several weeks because the change is so fundamental. While DES complain DEV for these reasons: Code architecture is not good enough to adapt to changing requirements (Obviously DES knows something about software development) Product design is about principles, not details. DEV fails to realize this. Communication should be quick and should be mainly oral. Trying to make most feature discussion in document for reference is too overloaded and doesn't make sense. As you can see, DEV and DES have different ideas on product design, and encourages very different practice. We have this difference because of the way we work. So our solution is that we should plan some seminars to make each part more aware of the way the other part work. Then my question is, what are some good topics for such seminars? Guessing some people may not think seminars can solve this problem, please also suggest your solution.

  Read the article

• Netbook Remix 10.04 to 10.10 upgrade using alternate iso

  - by Suman Subramonian

  I'm using Netbook Remix 10.04 now. I'm having the 10.10 alternate iso with me. If I use that iso to upgrade, will I lose my netbook version? I've seen in some forums that the upgrade resulted in a change from netbook version to desktop version. Updated on 15/12/2010 I upgraded the OS from 10.04 to 10.10. But I'm getting an error like this after restart: modprobe: FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory I searched in the forums and got a solution like this: Open Terminal gksudo gedit /etc/initramfs-tools/initramfs.conf change the line MODULES=most to MODULES=dep Then use Synaptic (SystemAdministrationSynaptic Package Manager) to reinstall initramfs-tools. I'll be definitely trying this later. After that when the system tries to login, my screen starts flashing with just the ubuntu netbook desktop wallpaper on the screen. No other options will be available. It will be flashing continuosly. If I press the power button then one window comes up with options like Shut down, Restart, Hibernate etc. And the screen won't stop flashing either. I've uploaded a 1 min video. Please go through it as it will give you a clear idea of the error which I'm facing now Video Link Here

  Read the article

• Reconstruct a file from a TCP stream

  - by Abhishek Chanda

  I have a client and a server and a third box which sees all packets from the server to the client (but not the other way around). Now when the client requests a file from the server (over HTTP), the third box sees the response. I am trying to reconstruct the file there. I am using libpcap to capture TCP datagrams and trying to reconstruct the file there. Here is what I did Listen for packets on an interface Group all packets which have the same ACK number Sort the group based on SEQ number Extract data from each packet and combine them and write to the disk The problem is, the file thus generated is not exactly the same as the original file. Does everything sound correct here? Some more details: I am using C++ The packet data is being stored as std::vector<char> I did change the byte order while reading the ack number and seq number from the packet using ntohl I am not sure if I need to change the byte order for the data as well. I tried to reverse the data from each packet before combining them, even that did not work. Is there something I am missing?

  Read the article

• Data base structure of a subscriber list

  - by foodil

  I am building a application that allow different user to store the subscriber information To store the subscriber information , the user first create a list For each list, there is a ListID. Subscriber may have different attribute : email phone fax .... For each list, their setting is different , so a require_attribute table is introduced. It is a bridge between subscriber and List That store Listid ,subid , attribute, datatype That means the system have a lot of list, each user have their own list, and the list have different attribute, some list have email , phone , some may have phone, address, name mail.. And the datatype is different, some may use 'name' as integer , some may use 'name' as varchar attribute means email phone, it is to define for which list have which subscriber attribute datatype means for each attribute, what is its datatype Table :subscriber : Field :subid , name,email Table :Require Attribute: Field : Listid ,subid , attribute, datatype The attribute here is {name, email} So a simple data is Subscriber: 1 , MYname, Myemail Require Attribute : Listid , 1 , 'email', 'intger' Listid , 1 , 'name', 'varchar' I found that this kind of storage is too complex too handle with, Since the subscriber is share to every body, so if a person want to change the datatype of name, it will also affect the data of the other user. Simple error situation: Subscriber: list1, Subscriber 1 , name1, email1 list2, Subscriber 2 , name2 , email2 Require Attribute : List1 , Subscriber 1 , 'email', 'varchar', List1 , Subscriber 1 , 'name', 'varchar', Listid , Subscriber 2 , 'email', 'varchar', Listid , Subscriber 2, 'name', 'integer', if user B change the data type of name in require attribute from varchar to integer, it cause a problem. becasue list 1 is own by user A , he want the datatype is varchar, but list 2 is won by user B , he want the datatype to be integer So how can i redesign the structure?

  Read the article

• Releasing software/Using Continuous Integration - What do most companies seem to use?

  - by Sagar

  I've set up our continuous integration system, and it has been working for about a year now. We have finally reached a point where we want to do releases using the same. Before our CI system, the process(es) that was used was: (Develop) -> Ready for release -> Create a branch -> (Build -> Fix bugs as QA finds them) Loop -> Final build -> Tag (Develop) -> Ready for release -> (build -> fix bugs) Loop -> Tag Our CI setup: 1 server for development (DEV) 1 server for qa/release (QA) The second one has integrated into CI perfectly. I create a branch when the software is ready for release, and the branch never changes thereafter, which means the build is reproduceable without having to change the CI job. Any future development takes place on HEAD, and even maintainence releases get a completely new branch and a completely new job, which remains on the CI system forever, and then some. The first method is harder to adapt. If the branch changes, the build is not reproduceable unless I use the tag to build [jobs on the CI server uses the branch for QA/RELEASE, and HEAD for development builds]. However, if I use the tag to build, I have to create a new CI job to build from the tag (lose changelog on server), or change the existing job (lose original job configuration). I know this sounds complicated, and if required, I will rewrite/edit to explain the situation better. However, my question: [If at all] what process does your company use to release software using continuous integration systems. Is it even done using the CI system, or manually?

  Read the article

• Changing domain name - what are the practical steps involved

  - by Homunculus Reticulli

  I launched a website a couple of years ago, bright eyed and bushy tailed, with dreams of conquering the world. Unfortunately it wasn't to be. Now, that I am a bit older and wiser, I have spent some money on branding and creating more quality content etc, I am rebranding and relaunching the site with a new domain name. Although the traffic on the old site is laughable (i.e. non-existent), there are a few pages of good information on there and I don't want to lose any "juice" those pages may have gained because web crawlers have been seeing it for a few years now. Ok, the upshot of all that is this: I want to change my domain name from xyz.com to abc.com. I am maintaining the same friendly urls I had before, only the domanin name part of the url will change, so that any traffic coming to the old page will be forwarded/redirected? to the new page seamlessly. How do I go about achieving this (i.e. what are the steps I need to carry out, and to minimize any "disruption" to any credibility the existing site has with Googlebot etc? I am running Apache 2.x on a headless Linux (Ubuntu) server.

  Read the article

• Versioning APIs

  - by Sharon

  Suppose that you have a large project supported by an API base. The project also ships a public API that end(ish) users can use. Sometimes you need to make changes to the API base that supports your project. For example, you need to add a feature that needs an API change, a new method, or requires altering of one of the objects, or the format of one of those objects, passed to or from the API. Assuming that you are also using these objects in your public API, the public objects will also change any time you do this, which is undesirable as your clients may rely on the API objects remaining identical for their parsing code to work. (cough C++ WSDL clients...) So one potential solution is to version the API. But when we say "version" the API, it sounds like this also must mean to version the API objects as well as well as providing duplicate method calls for each changed method signature. So I would then have a plain old clr object for each version of my api, which again seems undesirable. And even if I do this, I surely won't be building each object from scratch as that would end up with vast amounts of duplicated code. Rather, the API is likely to extend the private objects we are using for our base API, but then we run into the same problem because added properties would also be available in the public API when they are not supposed to be. So what is some sanity that is usually applied to this situation? I know many public services such as Git for Windows maintains a versioned API, but I'm having trouble imagining an architecture that supports this without vast amounts of duplicate code covering the various versioned methods and input/output objects. I'm aware that processes such as semantic versioning attempt to put some sanity on when public API breaks should occur. The problem is more that it seems like many or most changes require breaking the public API if the objects aren't more separated, but I don't see a good way to do that without duplicating code.

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >