Search Results

Search found 28288 results on 1132 pages for 'home directory'.

Page 281/1132 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Batch deletion of smaller files from group of files via unix command line

  - by artlung

  I have a large number (more than 400) of directories full of photos. What I want to do is to keep the larger sizes of these photos. Each directory has 31 to 66 files in it. Each directory has thumbnails, and larger versions, plus a file called example.jpg I dispatched the example.jpg file easily with: rm */example.jpg I initially thought that it would be easy to delete the thumbnails, but the problem is they are not consistently named. The typical pattern was photo1.jpg and photo1s.jpg. I did rm */photo*s.jpg but it ended up some of the files named photoXs.jpg were actually larger and not smaller. Argh. So what I want to do is scan each directory for filesize and delete (or move) the thumbnails. I initially thought I'd just ls -R every file and extract the size of each file and save those under a threshold. The problem? In one directory the large will be 1.1 MB and the thumb is 200k. In another the large is 200k and the small 30k. Even worse, the files really are mostly named photo1.jpg - so simply putting them all in the same folder, sorting by size, and deleting in groups would not work without renaming already, and if it's possible I'd prefer to keep them in their folders. I was almost resolved to just doing this all manually, but then thought I'd ask here. How would you do this task?

  Read the article

• apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName

  - by user35402

  I keep getting this warning when I (re)start Apache. Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] This is the content of my etc/hosts file: #127.0.0.1 hpdtp-ubuntu910 #testproject.localhost localhost.localdomain localhost #127.0.1.1 hpdtp-ubuntu910 127.0.0.1 localhost 127.0.0.1 testproject.localhost 127.0.1.1 hpdtp-ubuntu910 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts This is the content of my /etc/apache2/sites-enabled/000-default file: <VirtualHost *:80> ServerName testproject.localhost DocumentRoot "/home/morpheous/work/websites/testproject/web" DirectoryIndex index.php <Directory "/home/morpheous/work/websites/testproject/web"> AllowOverride All Allow from All </Directory> Alias /sf /lib/vendor/symfony/symfony-1.3.2/data/web/sf <Directory "/lib/vendor/symfony/symfony-1.3.2/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> When I go to http://testproject.localhost, I get a blank page can anyone spot what I am doing wrong?

  Read the article

• Apache directive for authenticated users?

  - by Alex Leach

  Using Apache 2.2, I would like to use mod_rewrite to redirect un-authenticated users to use https, if they are on http.. Is there a directive or condition one can test for whether a user is (not) authenticated? For example, I could have set up the restricted /foo location on my server:- <Location "/foo/"> Order deny,allow # Deny everyone, until authenticated... Deny from all # Authentication mechanism AuthType Basic AuthName "Members only" # AuthBasicProvider ... # ... Other authentication stuff here. # Users must be valid. Require valid-user # Logged-in users authorised to view child URLs: Satisfy any # If not SSL, respond with HTTP-redirect RewriteCond ${HTTPS} off RewriteRule /foo/?(.*)$ https://${SERVER_NAME}/foo/$2 [R=301,L] # SSL enforcement. SSLOptions FakeBasicAuth StrictRequire SSLRequireSSL SSLRequire %{SSL_CIPHER_USEKEYSIZE} >= 128 </Location> The problem here is that every file, in every subfolder, will be encrypted. This is quite unnecessary, but I see no reason to disallow it. What I would like is the RewriteRule to only be triggered during authentication. If a user is already authorised to view a folder, then I don't want the RewriteRule to be triggered. Is this possible? EDIT: I am not using any front-end HTML here. This is only using Apache's built-in directory browsing interface and its in-built authentication mechanisms. My <Directory> config is: <Directory ~ "/foo/"> Order allow,deny Allow from all AllowOverride None Options +Indexes +FollowSymLinks +Includes +MultiViews IndexOptions +FancyIndexing IndexOptions +XHTML IndexOptions NameWidth=* IndexOptions +TrackModified IndexOptions +SuppressHTMLPreamble IndexOptions +FoldersFirst IndexOptions +IgnoreCase IndexOptions Type=text/html </Directory>

  Read the article

• Using a Linksys Wireless- G Broadband Router for a Wireless Antenna/Adapter?

  - by Alex

  (Warning: I'm not too computer-smart). Just moved fm a home where I used ATT DSL to a home w/ Comcast Cable for internet. Old home had the DSL ethernet wired to my only desktop w/ a 2Wire router for my wireless signal for the laptops. In the new home the signal comes fm cable via a Netgear(300) wireless router (remotely located) & works fine for my laptops. After searching with the network software, my desktop (can't be ethernet wired cuz of location) detects no wireless signal. Desktop is a 2 yr old HP p6311f Pavilion (Windows 7). Can't seem to detect any wireless hardware (ant/adaptr). Maybe I don't have the ability & need to buy a USB wireless antenna? Would the Pavilion come w/ wireless capability out of the box, maybe something inside the tower? No antenna on back. I happen to have a Linksys Wireless router which I plugged in to the desktop (trying both internet & shared ports) & noticed signal action on the router front panel. No internet on desktop though. Can I use this as an antenna for the desktop? Thanks & sorry if my solution is an easy one I'm just missing. Just want internet on the desktop.

  Read the article

• How to copy a bunch of pages? Is there a 3rd party tool?

  - by unknown (yahoo)

  (I asked the following question at the DNN forum, and also at snowcovered. Nobody knew of such an obvious time-saver being for sale. I'm posting here in case anybody knows of a freeware module that might do this.) By "groups of dnn pages", I mean pages that form a hierarchy (not necessary a hierarchy that is headed with a page at the same level as the Home page.) I know that I can copy web pages, one by one, using the admin login via the web-based dnn interface. But, I'd prefer a script or wizard, of some sort (that runs scripts behind the scenes) that can allow me to 1) specify a web page that I want to copy (along with the hierarchy of pages under it) 2) specify the names and titles of the new top-level pages 3) specify whether the contained modules of the top-level page that I want to copy is to be : ( ) New ( ) Copy ( ) Reference (as in the web-based interface) 4) repeat 3) for each of the source pages in the hierarchy that I want to copy You might say that I am looking to do something similar to creating a portal web site based on a template, except that it's not an entirely new website - instead it's a section of the current web site. I might want to do this because I have an organization which is broken into chapters, and I want each chapter to have, say, it's own General Information page (which acts like it's home page), and underneath that, in it's hierarchy, a Contact Info page and an Events page. so: Home Page   General Information Page     Contact Info     Events -- Home Page   General Information Page     Contact Info     Events   General Information Page Kiwanis - Bloomfield     Contact Info     Events   General Information Page Kiwanis - Dayton     Contact Info     Events If I have 200 chapters, I certainly don't want to copy those 3 web pages using the web based interface, as that would take a long time. (And imagine if each chapter's new sub-website had 30 pages!) I just want to specify the parameters of a copy process, then press a button, and let the system do the rest.

  Read the article

• ubuntu - Best way of repartitioning a (running) production server

  - by egarcia

  I've got an (externally hosted) production server running Ubuntu LTS. It serves webpages (rails) and has an svn repository accesible through Apache, and a PostgreSQL db. I've got ssh access to the server and root privileges. Most of the "interesting" stuff is located in /var/ : svn repositories are inside /var/svn, web pages under /var/www, etc. Yesterday I was curious about how much disk space had it left, so I did the following: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/md1 950M 402M 500M 45% / varrun 990M 64K 990M 1% /var/run varlock 990M 0 990M 0% /var/lock udev 990M 76K 989M 1% /dev devshm 990M 0 990M 0% /dev/shm /dev/md5 4.7G 668M 4.1G 15% /usr /dev/md6 4.7G 1.4G 3.4G 29% /var /dev/md7 221G 28M 221G 1% /home none 990M 4.0K 990M 1% /tmp My 'var' partition, which holds most of the interesting part, is only 4.7G big. The /home/ partition, on the other hand, is 221G, but it is mostly unused. I should have checked the disk layout before starting installing stuff. Ideally I would need /var/ and /home/ to be "switched" - /home/ should be the one with 4.7G, and /var/ the one with 221G. Is there a way to solve this without having to reinstall the whole thing?

  Read the article

• How to serve Rails application with Passenger/Apache without domain name?

  - by grifaton

  I am trying to serve a Rails application using Passenger and Apache on a Ubuntu server. The Passenger installation instructions say I should add the following to my Apache configuration file - I assume this is /etc/apache2/httpd.conf. <VirtualHost *:80> ServerName www.yourhost.com DocumentRoot /somewhere/public # <-- be sure to point to 'public'! <Directory /somewhere/public> AllowOverride all # <-- relax Apache security settings Options -MultiViews # <-- MultiViews must be turned off </Directory> </VirtualHost> However, I do not yet have a domain pointing at my server, so I'm not sure what I should put for the ServerName parameter. I have tried the IP address, but when I do that, restarting Apache gives apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sun Jan 17 12:49:26 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sun Jan 17 12:49:36 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results and pointing the browser at the IP address gives a 500 Internal Server Error. The closest I have got to something sensible is with <VirtualHost efate:80> ServerName efate DocumentRoot /root/jpf/public <Directory /root/jpf/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> where "efate" is my server's host name. But now pointing my browser at the server's IP address just gives a page saying "It works!" - presumably this is a default page, but I'm not sure where this is being served from. I might be wrong in thinking that the reason I have been unable to get this to work is related to not having a domain name. This is the first time I have used Apache directly - any help would be most gratefully received!

  Read the article

• Windows 7 - Windwos XP - sharing - why isn't working?

  - by durumdara

  Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

  Read the article

• How to manage mounted partitions (fstab + mount points) from puppet

  - by Cristian Ciupitu

  I want to manage the mounted partitions from puppet which includes both modifying /etc/fstab and creating the directories used as mount points. The mount resource type updates fstab just fine, but using file for creating the mount points is bit tricky. For example, by default the owner of the directory is root and if the root (/) of the mounted partition has another owner, puppet will try to change it and I don't want this. I know that I can set the owner of that directory, but why should I care what's on the mounted partition? All I want to do is mount it. Is there a way to make puppet not to care about the permissions of the directory used as the mount point? This is what I'm using right now: define extra_mount_point( $device, $location = "/mnt", $fstype = "xfs", $owner = "root", $group = "root", $mode = 0755, $seltype = "public_content_t" $options = "ro,relatime,nosuid,nodev,noexec", ) { file { "${location}/${name}": ensure => directory, owner => "${owner}", group => "${group}", mode => $mode, seltype => "${seltype}", } mount { "${location}/${name}": atboot => true, ensure => mounted, device => "${device}", fstype => "${fstype}", options => "${options}", dump => 0, pass => 2, require => File["${location}/${name}"], } } extra_mount_point { "sda3": device => "/dev/sda3", fstype => "xfs", owner => "ciupicri", group => "ciupicri", $options = "relatime,nosuid,nodev,noexec", } In case it matters, I'm using puppet-0.25.4-1.fc13.noarch.rpm and puppet-server-0.25.4-1.fc13.noarch.rpm.

  Read the article

• Strange difference in bash behavior across systems

  - by pinkie_d_pie_0228

  I have two systems, an Ubuntu computer and an Android tablet. I have built and configured bash for Android to be used in adb, so it's the same version as my Ubuntu bash, and they use mostly the same bashrc and configuration, and the same exact options set by shopt. However, there is a slight difference in that the Android bash behaves as I expect when I I try to tab-complete something using a variable in it, but the Ubuntu bash doesn't. #Android ls $HOME/loc<tab> => ls $HOME/local #As expected Basically, the variable is taken into account when completing. But then #Ubuntu ls $HOME/loc<tab> => ls \$HOME/loc #Undesired behavior. The list of options is as follows, and is the same in both builds of bash. autocd:checkwinsize:cmdhist:expand_aliases:extglob:extquote:force_fignore:histappend:interactive_comments:progcomp:promptvars:sourcepath What can be making the Ubuntu version escape the $ instead of using it for completion as in the Android build? What can I do to make both work the same way? Any help will be greatly appreciated.

  Read the article

• Wrong Outlook anywhere settings

  - by Ken Guru

  Hey all I wanted to enable NTLM authentication on OutlookAnywhere, and after doing the command Set-OutlookAnywhere -IISAuthenticationMethods Basic,NTLM, my settings got changed. This is a dump before I run the command: [PS] C:\Windows\system32Get-OutlookAnywhere ServerName : EXCAS01 SSLOffloading : False ExternalHostname : ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic} MetabasePath : IIS:///W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : EXCAS01 AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : Rpc (Default Web Site) DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN= EXCAS01,CN=Servers,CN=Exchange Administrative Grou p (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Fi rst Organization,CN=Microsoft Exchange,CN=Services ,CN=Configuration,DC=asp,DC=ssc,DC=no Identity : EXCAS01\Rpc (Default Web Site) Guid : 289b4865-caf1-4412-95ee-6fb0dff55e8b ObjectCategory : asp.ssc.no/Configuration/Schema/ms-Exch-Rpc-Http-V irtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtual Directory} WhenChanged : 05.01.2011 16:59:55 WhenCreated : 27.11.2009 11:20:12 OriginatingServer : IsValid : True Noticde the settings for "Name", "DistinguishedName", and "Identity". After I run the command, I ended up with this: [PS] C:\Windows\system32Get-OutlookAnywhere ServerName : EXCAS01 SSLOffloading : False ExternalHostname : ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic, Ntlm} MetabasePath : IIS:///W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : EXCAS01 AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : EXCAS01 DistinguishedName : CN=EXCAS01,CN=HTTP,CN=Protocols,CN=EXCAS01,CN=Serv ers,CN=Exchange Administrative Group (FYDIBOHF23SP DLT),CN=Administrative Groups,CN=First Organizatio n,CN=Microsoft Exchange,CN=Services,CN=Configurati on,DC=asp,DC=ssc,DC=no Identity : EXCAS01\EXCAS01 Guid : 289b4865-caf1-4412-95ee-6fb0dff55e8b ObjectCategory : asp.ssc.no/Configuration/Schema/ms-Exch-Rpc-Http-V irtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtual Directory} WhenChanged : 06.01.2011 09:43:50 WhenCreated : 27.11.2009 11:20:12 OriginatingServer : ASP-DC-2. IsValid : True Now, the "Name", "DistinguishedName" and "Identity" has changed, and when I try to change it back by running "Set-OutlookAnywhere -Identity "EXCAS01\Rpc (Default Web Site)", I get the following error: [PS] C:\Windows\system32Set-OutlookAnywhere -Identity "EXCAS01\Rpc (Default Web Site)" Set-OutlookAnywhere : The operation could not be performed because object 'EXCA S01\Rpc (Default Web Site)' could not be found on domain controller 'ASP-DC-2.'. Remember, the RPC over HTTP works fine with Basic authentication (even with the wrong settings), but NTLM still doesnt work. How do I change back the settings?

  Read the article

• File corruption after copying files in Windows 7 64 bit using two methods

  - by DustByte

  I have 5000 pictures and other files in a directory taking up 35 GB. I want to duplicate this directory. Method 1: I do a simple copy and paste of the directory in explorer. I have the habit of checking the checksums after copying important files. In this case I noticed that around 2000 files failed the MD5 test. At a closer inspection of a randomly chosen JPEG with different checksums it turns out that some XMP metadata had changed. In particular, the tag <MicrosoftPhoto:DateAcquired> had changed the date from 2009 to today (possibly around the time I was copying the files). I have no idea what triggered this XMP data to be changed and exactly when it was changed and why for these particular files, but at least it seems to explain the checksum discrepancy. Method 2: As I want the exact files to be duplicated, I tried the program FreeFileSync to mirror the directory, hoping no XMP metadata would mysteriously change. A checksum test in addition to a thorough file comparison test in FreeFileSync lead to two similar but yet different results: 31 files fail the checksum test, 23 files fail the file comparison test. The smaller set is not entirely contained in the bigger set, although many files occur in both. What is alarming here is that not only JPEGs are flagged as altered but also som AVIs, MPGs and a large 7-zip file. Closer inspection of a JPEG indicates that it is indeed corrupt: the bottom half of the picture is simply plain gray. Due to the size of the 7-zip file, I have not been able to pin down the discrepancy. Note, in both methods, every file has its correct file size after being copied. Question: Any thoughts on what is possibly going on here? I have never had this problem before, and I am now terrified that files get corrupted after simple actions like copy/paste and file sync. Even if I manage to successfully copy the files somehow, I would still like an explanation to this.

  Read the article

• In Fedora, Perl program cannot find Time::Piece library

  - by Eric Leschinski

  I have a Perl program named /usr/bin/octbatch running as a script on Fedora 17 Linux. When I run this command: /usr/bin/octbatch I get the error: Can't locate Time/Piece.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at /usr/bin/octbatch line 6. BEGIN failed--compilation aborted at /usr/bin/octbatch line 6. Here is the relevant lines of the Perl script: #!/usr/bin/perl -wT $ENV{PATH} = "/bin:/usr/bin:/usr/local/bin"; use strict; use POSIX qw(setsid :sys_wait_h); use Time::Piece; use Time::Local; I have to install Piece.pm so perl can find it. I've already installed it with this command (using the defaults): /usr/bin/perl -MCPAN -e install Time::Piece I have the Piece.pm file in /home/el/perl5/lib/perl5/x86_64-linux-thread-multi/ however when I run the octbatch command I get the same error as above. Like it can't even find it. Here is my PERL5LIB variable: el@defiant ~/gnuoctbluehost/single_stock_analysis $ env | grep PERL5 PERL5LIB=/home/el/perl5/lib/perl5/x86_64-linux-thread-multi:/home/el/perl5/lib/perl5 And the Piece.pm is located under /home/el/perl5/lib/perl5/x86_64-linux-thread-multi So my question is, Why is it not finding my Piece.pm file? And what are the ways I can get the @INC variable to include it. Or how do I make perl see it?

  Read the article

• Apache2 configuration, .htacces and 310 error (www redirection)

  - by allstat

  I have an ubuntu apache serveur, with many websites. all my website have the same bug ( so it's look like a misconfiguration) http://www.2sigma.fr <- it's work fine ( we see "en travaux") http://2sigma.fr <- dont work, i got 310 error (cyclic redirection!) here my .htaccess Options +FollowSymlinks RewriteEngine on RewriteCond %{HTTP_HOST} ^2sigma\.fr$ RewriteRule ^(.*) http://www.2sigma.fr/$1 [R=301,L] here my confguration <VirtualHost *:80> <IfModule mpm_itk_module> AssignUserId sigma www-data </IfModule> ServerAdmin [email protected] ServerName 2sigma.fr ServerAlias www.2sigma.fr DocumentRoot /home/sigma/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/sigma/www> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog /var/log/apache2/error_sigma # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access_sigma combined ServerSignature Off If i use this .htaccess it's work fine : Options +FollowSymlinks RewriteEngine on RewriteCond %{HTTP_HOST} ^2sigma\.fr$ RewriteRule ^(.*) http://www.google.fr/$1 [R=301,L] I think that it is a apache configuration probleme... but i dont kno how to solve it. Thanks for your help

  Read the article

• Official end of support date for Internet Explorer 6 on Windows XP

  - by scunliffe

  If I read the docs on Windows Service Pack support policies, and the specific Internet Explorer lifecycle support page as well as the Wikipedia page I've deduced that: IE6 support ends/ended at: Windows 2000 Ended (date unknown) Windows XP SP0 (RTM) Ended Home: 30-Aug-2003 Pro: 30-Sep-2004 SP1 Ended Home: 11-Jul-2004 Pro: 11-Jul-2004 SP2 Home: 13-Jul-2010 Pro: 13-Jul-2010 SP3 (released: April 21, 2008) Home: ??? Pro: ??? What isn't clear is the Windows XP SP3 scenario. In "human" terms, when is the end of support for IE6 on Windows XP SP3? e.g. if there is never a Windows XP SP4... or heaven forbid, an SP4 is released. I realize this doesn't force people to upgrade etc. however I'm trying to get a "semi" official word on when IE6 moves into the "not supported" category. I'm not interested in philosophical answers e.g. "big enterprise won't upgrade but they will expect support into 2017" stuff... I just want the "clear answer" in terms of official Microsoft support.

  Read the article

• IIS6: How to troubleshoot a 404 error in an ASP.NET application?

  - by Tomalak

  I have an ASP.NET application on a Windows Server 2003/IIS6 that refuses to run for some reason (it's the Xerox Centre, if that info helps). It has been working flawlessly before though on this server. Now, all I get if I try to open the app homepage (http://some.intranet.server/XeroxCentreWareWeb/) is a "404 - File or directory not found" error. The app is configured to run in it's own app pool, which runs as Network Service. The Network Service account has read access to the configured directory. If I stop the app pool, I get the expected "Service Unavailable" message, meaning the app and its pool are wired correctly I tried to track down any file permission issues with procmon - nothing to be seen. There isn't even an access to the web app directory happening when the page loads. Interestingly, according to procmon, the web server accesses the 401-2 custom error file (Logon failed due to server configuration) first, but then decides to send the 404 down to the client. EDIT: The app runs with Windows-integrated authentication. Regular users have access to the app directory as well (I would have noticed file system "ACCESS DENIED" messages in procmon, if there had been any.) This makes me think that there is some kind of weird permission problem that occurs even before the application files are being accessed. I just have no idea where to look. I've tried to run the app pool as Local System for a test, but to no avail. What else could I check in this case?

  Read the article

• Cannot connect to FTP sites anymore

  - by Wayne M

  I have the FTP service running on Server 2003, and I am hosting websites through Apache. I have users configured to point to certain directories on the server. I am using FileZilla to remote FTP, but it never seems to connect to the directory. The command window says: Command: USER wayne Response: 331 Password required for wayne Command: PASS: ***** Response: 230 User wayne logged in Status: Connected Status: Retrieving directory isting... Command: PWD Response: 257 "/wayne" is current directory Command: TYPE I Response: 200 Type set to I. Command: PASV And that's it. It doesn't display any directories at all, and the pane says "Not connected to any server". Sometimes it will display the folder, but nothing happens when I click on it to expand it. It was working fine, and I have another FTP server set up the same way that does work. How can I fix this? EDIT: I've tried changing it to Active FTP, and it says: Command: LIST Command: 150 Opening BINARY mode data connection for /bin/ls Response: 425 Can't open data connection. Error: Failed to retrieve directory listing. I also noticed that I'm not able to browse the site in IIS's management console anymore, it just shows a blank screen when I click on one of the names and says There are no items to show in this view, although the name has permissions to view the folder and everything. Could it be because I have the Web Publishing service disabled (as I'm not using IIS to host websites)? That shouldn't cause anything should it?

  Read the article

• Need Corrected htaccess File

  - by Vince Kronlein

  I'm attempting to use a wordpress plugin called WP Fast Cache which creates static html files from all your posts, pages and categories. It creates the following directory structure inside wp-content: wp_fast_cache example.com pagename index.html categoryname postname index.html basically just a nested directory structure and a final index.html for each item. But the htaccess edits it makes are crazy. #start_wp_fast_cache - do not remove this comment <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_METHOD} ^(GET) RewriteCond /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}x__query__x%{QUERY_STRING}index.html -f RewriteCond %{HTTP_USER_AGENT} !(iPhone|Windows\sCE|BlackBerry|NetFront|Opera\sMini|Palm\sOS|Blazer|Elaine|^WAP.*$|Plucker|AvantGo|Nokia) RewriteCond %{HTTP_COOKIE} !(wordpress_logged_in) [NC] RewriteRule ^(.*)$ /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}x__query__x%{QUERY_STRING}index.html [L] RewriteCond %{REQUEST_METHOD} ^(GET) RewriteCond %{QUERY_STRING} ^$ RewriteCond /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}index.html -f RewriteCond %{HTTP_USER_AGENT} !(iPhone|Windows\sCE|BlackBerry|NetFront|Opera\sMini|Palm\sOS|Blazer|Elaine|^WAP.*$|Plucker|AvantGo|Nokia) RewriteCond %{HTTP_COOKIE} !(wordpress_logged_in) [NC] RewriteRule ^(.*)$ /home/user/public_html/wp-content/wp_fast_cache/%{HTTP_HOST}%{REQUEST_URI}index.html [L] </IfModule> #end_wp_fast_cache No matter how I try and work this out I get a 404 not found. And not the Wordpress 404, and janky apache 404. I need to find the correct syntax to route all requests that don't exist ie: files or directories to: wp-content/wp_fast_cache/hostname/request_uri/ So for example: Page: example.com/about-us/ => wp-content/wp_page_cache/example.com/about-us/index.html Post: example.com/my-category/my-awesome-post/ => wp-content/wp_fast_cache/example.com/my-category/my-awesome-post/index.html Category: example.com/news/ => wp-content/wp_fast_cache/example.com/news/index.html Any help is appreciated.

  Read the article

• Do you known a reputable backup software that can capture ONLY file system structure + attributes, WITHOUT file content

  - by bogdan

  Is there, on Windows, a reputable backup software out there capable of capturing ONLY a file system's directory and file structure, along with each item's attributes, WITHOUT capturing the actual file content (all files should be zero-length in the backup). I thoroughly searched the web for a solution and wasn't able to find one. Scenario when this would be very useful: I have a large drive with a huge amount of files. If the drive dies, I don't care so much about the content in these files (I can always download this content again from the Internet at any time) but I do care HUGELY about the names of the files that were on it, possibly also about their MD5 hashes and other classic file attributes (especially created-date / modified-date). The functionality I need is present to an extent in "media"/file cataloging software (i.e. whereisit) and, to a lesser extent, in a Total Commander set of extensions (DiskDir, DiskDirExtended). The huge drawback with cataloging software is that it's not designed to store previous versions of each item (AFAIK) and, most importantly, it has very weak content backup capabilities. I managed to think of a hack but I hope there's some backup software out there that already has this capability and I just failed to find it, thus this question. The hack: RoboCopy could be used with /CREATE (CREATE directory tree and zero-length files only) or /COPY (what to COPY for files) without the D=Data flag, to clone a directory structure into one where all files are zero-length but have the desired attributes. Then I would backup the cloned directory structure with a reputable backup software. I would really love to avoid a hack like this one, if possible. Thanks, Bogdan

  Read the article

• ProFTPD / PAM issues with new centos/virtualmin install

  - by iamthewit

  Hi All, I just installed CentOS 5.4 on a rackspace cloud server and installed virtualmin which all seemed to go fine. The only problem I have is that I can not access the virtual servers directories via FTP. I get the following from filezilla: Status: Connecting to 1.1.1.1:21... Status: Connection established, waiting for welcome message... Response: 220 FTP Server ready. Command: USER username Response: 331 Password required for username. Command: PASS ******* Response: 230 User username logged in. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (1,1,1,1,216,214) Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing and I get this from my /var/secure/log file Sep 22 19:40:42 stickeeserver proftpd: pam_unix(proftpd:session): session opened for user username by (uid=0) Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - USER nastypasty: Login successful. Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - Preparing to chroot to directory '/home/username' Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - mod_delay/0.5: delaying for 728 usecs Sep 22 19:40:42 server proftpd[14051]: 94.136.40.82 (::ffff:217.207.31.60[::ffff:217.207.31.60]) - error setting IPV6_V6ONLY: Protocol not available Any help would be greatly appreciated, I'm not totally new to Linux but it's not my strongest subject. I do like to know exactly why problems occur though and how exactly to fix them so the more detail the better! cheers

  Read the article

• Shell not finding binary when attempting to execute it (it's _definitely_ there)

  - by eegg

  I have a specific set of binaries installed at: ~/.GutenMark/binary/<binaries...> These were previously working correctly, but for seemingly no reason when I attempt to execute them the shell claims not to find them: james@anubis:~/.GutenMark/binary$ ls -al ... -rwxr-xr-x 1 james james 2979036 2009-05-10 13:34 GUItenMark ... -rwxrwxrwx 1 james james 76952 2009-05-10 13:34 GutenMark ... -rwxr-xr-x 1 james james 10156 2009-05-10 13:34 GutenSplit ... james@anubis:~/.GutenMark/binary$ ./GutenMark bash: ./GutenMark: No such file or directory james@anubis:~/.GutenMark/binary$ I've tried to isolate the cause of this, with no success. The same happens with zsh, bash, and sh (all giving their appropriate "file not found" error -- this is definitely not a strange output from the binary itself). The same happens either as user james or as root. Nor is it directory specific; if I move the whole directory installation, or just a single binary, to anywhere else, the same happens when attempting to execute it. The same even happens when I put the directory in $PATH and just execute "GutenMark". It also happens when I execute it from a script (I've tried Python's commands module -- though this appears to just call sh). The problem appears to be specific to the binaries themselves, yet they appear to never actually get executed. Any ideas?

  Read the article

• PHP include() through HTTP makes Apache time out

  - by Adam Interact

  I have a problem with ExpressionEngine2 after moving from an old server to WHM/cPanel running on CentOS6.4. Simple test code to reproduce that issue: <?php $protocol = strpos(strtolower($_SERVER['SERVER_PROTOCOL']),'https') === FALSE ? 'http' : 'https'; $host = $_SERVER['HTTP_HOST']; include($protocol . '://' . $host . '/header.html'); ?> <p> Main text...</p> <?php include($protocol . '://' . $host . '/footer.html'); ?> Where header.html looks like <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> and footer.html looks like: </body> </html> Creates Apache time out: Warning: include(http://www.domain.com/header.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 5 Warning: include() [function.include]: Failed opening 'http://www.domain.com/header.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 5 Main text... Warning: include(http://www.domain.com/footer.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 12 Warning: include() [function.include]: Failed opening 'http://www.domain.com/footer.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 12 Any clue what can be wrong with Apache or PHP configuration? Thanks

  Read the article

• How does one open multiple tabs in TextWrangler?

  - by Closure Cowboy

  No, I'm not bluffing. I really can't figure this out. The setup: I went to File -> Open, and then selected a directory rather than a file. As expected, a directory tree opened on the left side of my document. Hooray! I can easily view the files' structure in my Rails project. So, I make a few changes in a file, and then I click on a different file in the directory tree. My problem: TextWrangler then asks me whether I want to save my changes. Huh? I say "No", and the new document doesn't open at all. Great. I try hitting Command+N (new document). A new window opens. Ughhhh. How the heck do I open documents in a new tab? Note: I have set the "New & opened documents" behavior to "Open in the front window". This does not change the behavior described (i.e. when a directory is opened rather than a single file).

  Read the article

• What is /etc/apache2/sites-available used for and is it necessary?

  - by Mariane

  I have 3 sites, each with a specific IP, running on apache2 (up-to-date Ubuntu). To put a site online, I just created a file in: /etc/apache2/sites-enabled and in this file I told apache which directory was the root directory for this site, and to which IP it should correspond. So I have 000-default 001-www.lapf.eu 002-www.felkin.info 003-www.seidhr.fr in this directory. My first site, lapf suddenly lost contact with its database after the domain name was transferred from another registrar unto the registrar who is also hosting the site's data. Then I did an update, and I reinstalled mysql-server and mysql-common, and I did I-have-forgotten-what to reinstall the locales (uft8 and such) which had vanished for some reason. This fixed my first site. Now I noticed that the other 2 sites are offline. Pointing a browser to them just hangs until timeout. They used to function, and their domain names did not move, they are still registered at the same place. The files are still in /etc/apache2/sites-enabled I noticed another directory: /etc/apache2/sites-available with just defaut and default.ssl in it. Why are there 2 directories, sites-enabled and sites-available? Should I copy the files from "sites-enabled" into "sites-available"? Or should I put a modified version of each in "sites-available"? command: "apache2ctl -S" VirtualHost configuration: 92.243.20.169:80 Charlotte (/etc/apache2/sites-enabled/001-www.lapf.eu:1) 92.243.21.141:80 xvm-21-141.ghst.net (/etc/apache2/sites-enabled/002-www.felkin.info:1) 92.243.4.114:80 xvm-4-114.ghst.net (/etc/apache2/sites-enabled/003-www.seidhr.fr:1) wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server Charlotte (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost Charlotte (/etc/apache2/sites-enabled/000-default:1) Syntax OK

  Read the article

• ProxyPass for specific vhost with mod_rewrite

  - by Steve Robbins

  I have a web server that it set up to dynamically server different document roots for different domains <VirtualHost *:80> <IfModule mod_rewrite.c> # Stage sites :: www.[document root].server.company.com => /home/www/[document root] RewriteCond %{HTTP_HOST} ^www\.[^.]+\.server\.company\.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^www\.([^.]+)\.server\.company\.com(.*) /home/www/$1/$2 [L] </IfModule> </VirtualHost> This makes it so that www.foo.server.company.com will serve the document root of server.company.com:/home/www/foo/ For one of these sites, I need to add a ProxyPass, but I only want it to be applied to that one site. I tried something like <VirtualHost *:80> <Directory /home/www/foo> UseCanonicalName Off ProxyPreserveHost On ProxyRequests Off ProxyPass /services http://www-test.foo.com/services ProxyPassReverse /services http://www-test.foo.com/services </Directory> </VirtualHost> But then I get these errors ProxyPreserveHost not allowed here ProxyPass|ProxyPassMatch can not have a path when defined in a location. How can I set up a ProxyPass for a single virtual host?

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >