Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 281/332 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Unable to detect windows hard drive while running Ubuntu 12.04 from USB

  - by eapen jacob

  I am completely new to Ubuntu. I experimented with Ubuntu 12.04 by running it from a USB drive, in-order to recover files from my hard disc. History: My laptop is an IBM R60 running windows 7. Suddenly it gave me an error stating "error 2100 - Hard drive initialization error". I have read all the forums and most of them suggested that I remove and replace my HDD and that did not work. And one site suggested to try using Ubuntu to recover files. I booted my system from USB, and once Ubuntu came up, I choose "Try Ubuntu". It came up fine and I was able to surf ,and do other things, etc. I was unable to to access my files which are on the hard disc and "Attached Devices" is grayed out. 1- Is there any way to gain access to my hard disc to recover the files? How do I navigate to search for my files. 2- Is it just simply not possible if the hard disc themselves are not working? Is that why I`m unable to find the drives. I know its a very novice question, but hoping someone would help me out. Thank you, Eapen

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• Dual Boot Windows 8 and Ubuntu

  - by Nick

  My laptop has two hard drives, one 320GB HDD and a 30GB SSD. I installed Windows 8 on the HDD and Ubuntu on the SSD. However, after I installed Ubuntu, Windows 8 did not appear on the boot list. I tried boot-repair, but this didn't help.Here is the output of my fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd9314a Device Boot Start End Blocks Id System /dev/sda1 * 2048 625139711 312568832 7 HPFS/NTFS/exFAT Disk /dev/sdb: 30.0 GB, 30016659456 bytes 255 heads, 63 sectors/track, 3649 cylinders, total 58626288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd93132 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 207126 102539+ 83 Linux /dev/sdb2 208894 58626047 29208577 5 Extended /dev/sdb5 208896 4112383 1951744 82 Linux swap / Solaris /dev/sdb6 4114432 58626047 27255808 83 Linux Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009c694 Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 8192 7744511 3868160 b W95 FAT32 I also tried sudo grub-update, but that also did nothing.

  Read the article

• Cannot boot: FGLRX 8.780 + Kernel 2.6.35-25

  - by pluc

  The situation before this all happened is pretty standard. I have a HP Pavillion dv5 laptop with an ATI Mobility Radeon 4200 series. It always worked fine with Ubuntu for as long as I can remember. However, at one point, something happened and truly made a majestic mess of things. It might've been extra repos I enabled with Ubuntu Tweak - I do not know. But something made it so that my system would not boot any longer. And when I say "won't boot", this is what I mean: - Durning a normal bootup, any entries (except Windows) selected with GRUB (or BURG, not even sure which one I'm using anymore) will spawn the Ubuntu loading screen - then try to start X (or GDM) 5 times. The screen goes to dark, black and back to the Ubuntu loading screen. Then it just stays there until I spawn another TTY. I have no idea what is happening or why. There are no errors in my logs, and I'm truly at a loss here. I've linked three files: Xorg.0.log, the output of dmesg and the GDM log: Xorg.0.log: http://ubuntu.pastebin.com/tpVKc2tc dmesg: ubuntu.pastebin.com/Nd5aYj45 gdm's :0.log: couldn't post due to lack of points :( Let me know if any of you more knowledgeable folks can restore some sanity in my life. Any help is greatly apreciated.

  Read the article

• ADF - Now with Robots!

  - by Duncan Mills

  I mentioned this briefly in a tweet the other day, just before the full rush of OOW really kicked off, so I though it was worth re-visiting. Check out this video, and then read on: So why so interesting? Well - you probably guessed from the title, ADF is involved. Indeed this is as about as far from the traditional ADF data entry application as you can get. Instead of a database at the back-end there's basically a robot. That's right, this remarkable tape drive is controlled through an ADF using all your usual friends of ADF Faces, Controller and Binding (but no ADFBC for obvious reasons). ADF is used both on the touch screen you see on the front of the device in the video, and also for the remote management console which provides a visual representation of the slots and drives. The latter uses ADF's Active Data Framework to provide a real-time view of what's going on the rack. . What's even more interesting (for the techno-geeks) is the fact that all of this is running out of flash storage on a ridiculously small form factor with tiny processor - I probably shouldn't reveal the actual specs but take my word for it, don't complain about the capabilities of your laptop ever again! This is a project that I've been personally involved in and I'm pumped to see such a good result and,  I have to say, those hardware guys are great to work with (and have way better toys on their desks than we do). More info in the SL150 (should you feel the urge to own one) is here. 

  Read the article

• Windows Recovery from Grub messed up my computer?

  - by Hudson Worden

  Ok so I'm a noob when it comes to Operating Systems and I think I really messed up this time. So I have a laptop that dual boots Windows 7 and Linux Mint 11. I was trying to boot into Windows 7 but it would just have a black screen with a blinking cursor. So I turned off my computer and tried again. Still a black screen with a cursor. So I thought "well it must be broken somehow and I remembered seeing something like 'Windows Recovery' from the boot menu so I should try it." So when I turned on my computer a third time I selected 'Windows Recovery' (Something like that I can't remember exactly what it was called). After I had selected that I got a white Windows window that said in big red letters "ERROR". I turned off my computer again a turned it back on expecting the Grub menu to reappear. I was wrong. Instead I am greeted with error: no such partition grub rescue. Then I put in a live CD for ubuntu 11.04 and tried looking at my partitions using the disk manager. Looking at my partitions I notice that there isn't a Linux partition anymore and in its place is a unallocated space partition yet the Linux Swap partition is still there. My windows partition is still fine and I can access the files in it. If you understand what has happened, is there anyway I can get my files back? I don't care about reinstalling the OS again. I just want those files that are in the Linux Mint partition.

  Read the article

• Shader compile log depending on hardware

  - by dreta

  I'm done with the core of my graphics engine and I'm testing it on every platform I can get my hands on. Now, what I noticed is that different drivers return different shader and program compile log content. For example, on my friend's laptop if you successfuly compile a shader then the log is simply empty. However on my PC I get some useful information along with it. So if I compile a vertex shader, I'll get: Vertex shader was successfully compiled to run on hardware. Which isn't that impressive, but is what happens when I compile a program. On my friend's computer the log is empty, since the program compiles. However on my own computer I get: Vertex shader(s) linked, fragment shader(s) linked. Which is awesome, because I'm attaching a geometry shader with 0 (I have a geometry shader file with trash, so it doesn't compile and the pointer is set to 0), and the compiler just tells me which shaders linked. Now it got me thinking, if I was going to buy a graphics card, is there a way for me to get the information about whether or not I'll get this "extended" compile information? Maybe it's vendor specific? Now I don't expect an answer TBH, this seems a bit obscure, but maybe somebody has any experience with this and could post it.

  Read the article

• Keyboard not working 100% after Ubuntu 13.10 upgrade

  - by Marky

  If this has already been asked, my apologies, I did not find it before writing this. So please do point me to the correct page. Anyway, I have this weird issue on my laptop right now. The keyboard is not functioning 100%. This means, I can type my login details to get into Ubuntu. I can type something on Dash. But other than this (on the desktop), no output from the keyboard when using all the other apps - as in I start to type and nothing comes out. The surprising thing is that when I shift to Guest session, the keyboard functions normally. When I shift to another TTY, like Alt+F5, keyboard works normally. This is the first time I've encountered this so far in my use of Linux. Keyboards normally never fail on any of the desktop environments I've used over the years. Any ideas what's happening? Could be the config files on my home is too messy already. I've upgraded this from 11.10 to 13.04, then now 13.10 without a re-install. Works fine so far, until now that I can't do much without a keyboard. Thanks in advance! P.S. Mouse and touchpad works fine.

  Read the article

• Video Bug after a fresh installation

  - by Matan

  Hello, I just installed Ubuntu 10.10 (I'm brand new to Ubuntu) on my laptop. I seem to have a video bug that I don't know how to deal with. When the log-in screen comes up, the boxes are way off in the corner of the screen (partially off it). When I enter my password, the screen goes black for a few seconds, then returns to the login screen. I can open a Terminal window and enter my login info that way. When I go back to Gnome (Ctrl+Alt+F7 or whatever) it shows me as "logged in" but I still can't get to the desktop. If anyone has any advice, I'd love to hear it--just try to use simple language, please, since I really don't know Linux at all yet! I'm running an Averatec 3700 Series: Mobile AMD Sempron 3000+ 512 MB DDR, 80 GB HDD After looking at this question I tried going in through Failsafe mode (took me a while to figure out the hold-shift-while-booting thing _<) and playing around with the resolution. Setting a somewhat wider resolution did seem to fix things so that I can log into regular GNOME, I think. I'm not sure if this fix will persist, but it seems like it might!

  Read the article

• Will the Driver Support for Intel HD Graphics be Improved in 12.10?

  - by Hiranya

  I recently installed Ubuntu 12.04 on a HP Pavilion dv4 laptop. This is a core i7 machine with Intel HD graphics and also a separate nVidia VGA card. I had a lot of issues getting Ubuntu 12.04 working on this system. First there were issues booting up the live CD for installation. I worked around that by using the 'nomodeset' option. Then I continued to have similar issues after installation has completed. So I had to permanently add the nomodeset option to my GRUB boot configuration. At the moment I have a working installation but there are many issues: Ubuntu GUI is a bit flaky at times. The mouse pointer goes on and off when hovering over certain icons. Certain things doesn't get rendered properly on the screen. I can't access any of the tty consoles. Hitting Ctrl+Alt+F[1-6] gives me a blank screen. And once that happens I can't even come back to the UI by hitting Ctrl+Alt+F7. I've realized that tty consoles are actually working. I just can't see the text. If I enter a command like 'sudo reboot' into the empty screen the machine reboots. Can't get external displays (monitors, projectors etc) working. But I think this is probably because the VGA out is wired to the nVidia card which is not being used by Linux. colord program crashes every now and then triggering a popup message. So my main question is, will the support for Intel HD graphics be improved in the next release? Or will I have to keep using the nomodeset option in the new release too? Also I appreciate if anybody can shed some light on any of the issues listed above. Thanks in advance.

  Read the article

• Kubuntu 11.10 Lot of Networking problems

  - by Cobraone

  Since I upgrade to 11.10 I have a lot of problems with KDE. First of all there are problems in configuring a static IP address. Just to explain @home I have a normal fiber ADSL and I use a DHCP. When I go to a customer I must insert a static IP address. With ifconfig everything seems ok but there is something wrong in searching DNS names. (I have installed Ubuntu and was going ok again). Now I Have reinstalled again Kubuntu 11.10 and I have the same problem in addition today I have discovered that if I connect to a network in another customer office the desktop freezes and I could only switch between windows with alt+tab. No FN key or right click to open run command works. So i unplugged network (configuration is just DHCP here) and tried on another position in office. It was the same. My Laptop freezes when connected, a fedora 14 of a friend works. So I decided to connect my Galaxy S II as USB network device. Everything is ok for like 3 minutes. When I noticed a little loss of signal again the desktop freezes and i must work (like now) just switching between windows with alt+tab). Additional information: Unplugging network or restarting it via Konsole does not not solve the freezing problem. Every time I must open a console and reboot. Any idea of what tests to do ? Just a recommendation: If I must post here logs or something else please guide me. I use Linux since Ubuntu 9 but I am not an "expert".

  Read the article

• ALPS touchpad on DELL Inspiron I15RN-3647BK with Ubuntu 11.10 x64

  - by Miguel

  I can't make work the multitouch of the ALPS touchpad in my Dell Inspiron I15RN-3647BK with Ubuntu 11.10 x64, kernel 3.0.0-17-generic... I have tried with this driver but it doesn't work http://people.canonical.com/~sforshee/alps-touchpad/psmouse-alps-0.10/psmouse-alps-dkms_0.10_all.deb. This is the result from the following command: user@laptop:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Dell WMI hotkeys That came with or without the alps driver from canonical repository and the touchpad just works like a PS2 generic mouse... Any ideas? Thanks in advance...

  Read the article

• Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

  - by user90841

  Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

  Read the article

• Can't connect nonlocally after 12.10 upgrade

  - by user101815

  I've just upgraded one of my systems from 12.04 to 12.10. Now I can't connect on that system beyond my local network. Connections within the local network seem to work fine, and I can make nonlocal connections from other machines (like the one I'm asking this question from). I suspect that some routing information has been messed up, but I don't know where to look for it. It's not a nameserver problem -- pinging outside sites by their IP addresses doesn't work either. I have another laptop next to this one, also running Kubuntu 12.10. On the one that can't connect, arp produces no output. On the other one, it produces 192.168.0.1 ether 00:23:69:fa:ce:ae C wlan0 On the working machine, the output of netstat starts with some tcp entries. On the nonworking one, those entries are absent. I asked this question on the Ubuntu forum but haven't gotten any answers there. One further complication: since the troublesome machine has no outside connection, it's extremely difficult to download anything to it. For what it's worth, "ping 8.8.8.8" produces "connect: Network is unreachable". Update: after a lot of fiddling, I have my external world back. I don't know what the key action was, but the first indication of progress was that "ping 8.8.8.8" worked. At that point I still didn't have a working nameserver, so external URLs didn't work. But I did this (based on an online post, of course): sudo dpkg-reconfigure resolvconf and answered Yes to all prompts. That did the trick!! Apparently my problem was unique, or close to it, since I couldn't find any online references to it: local net working, remote net not working, including explicit IP addresses. So I suppose that if no one else has this problem, no one cares about the solution!!

  Read the article

• How do I find the correct Modeline to connect my computer to my Televsion

  - by Mikelane

  I've been trying to hook up a Ubuntu computer with my Panasonic TH-42PA60A Plasma television for weeks now. My original question was asked here, which includes all the specifications about the Television in detail and how I've connected the computer to the televsion. So far, I've tried hooking up three other computers; 2 Ubuntu computers with fairly new graphic cards, and a Windows XP computer. None of them have been able to display an image on the television. The closest I've come to getting a picture up is with my small laptop running Ubuntu, however the image came out all purple and distorted. I had gotten the image by adding extra modes via the xrandr command, using a process similar to described here. I realize it might be possible to get this working if I had the correct modeline. I've checked the Modeline database, but the Panasonic TH-42PA60A is not listed. How can I find the correct modeline for my television. What commands can I use? I've read that there may be a danger of damaging my TV when doing things like this. What things should I avoid to prevent damaging my television?

  Read the article

• Can't log-in anymore

  - by Awake Zoldiek

  I installed Ubuntu x64 12.04 Desktop LTS on my new laptop three days ago. Of course when I installed it I did an "apt-get upgrade" and a "apt-get update". I modified the .bashrc file to add some aliases but that's about it. Everything went fine I think, but this morning when I tried to connect to my user account, it just simply didn't work. Even when I give the right password, it will send me to a black screen with a few text lines written in white for a second and then back to the log-in screen. When I logged into the guest session, I couldn't shutdown / restart. I tried the "rm /home/MyUsername/.Xauthority" solution after doing a Ctrl + Alt + F1 at the log-in screen. But that didn't work. Does anyone has an idea ? My Ubuntu seems to use Gnome. Thank you a lot in advance ! This question is similar to this one, but their solution didn't help : -- after 12.04 upgrade: can't log in although password is correct

  Read the article

• Can I make a business in teaching home users Ubuntu [on hold]

  - by Dorgaldir

  I was thinking about a way to bring Ubuntu to the bigger public, since it has great advantages for people in the lower income class that only use a PC for basic usage. They pay for a windows licence without actually needing windows because 95% of what they do is in a browser and the other 5% is typing a word document or making a simpel Excel sheet. So for these people something like Ubuntu is ideal, they can prolong the life of their old PC or laptop with Ubuntu and thus saving extra money. And as we all know, saving money is not only interesting for the lowest of income but for most of us. But when I talk to people they don't want to use Ubuntu because they know Windows and they don't know this, they'll complain about having to adapt to windows 8 but adapting to Ubuntu seems a bridge too far. But what if someone in the neighborhood gave simple Ubuntu courses. Teaching people about Ubuntu, stuff like: What is an OS What is Ubuntu How do I obtain Ubuntu How do I install Ubuntu How do I set up my email in Ubuntu How do I make a text document in Ubuntu How do I update my facebook wall in Ubuntu ... Simple basic PC usage, but within Ubuntu. But as much as I would like to work for free all day, I can't do this for free for people outside of my social circle. So I was wondering if it is possible to make a business and make money with giving Ubuntu courses, or are their steps to be taken before this is possible. However... Do I need an Ubuntu or Canonical license? Do I need to get a certificate? Do I have to make some kind of deal or contract with Canonical? Just to be clear this is all just an idea in my head at this point, I'm just gathering information. I'm not a teacher at a school, just a programmer that is thinking about options in life. Thanks in advance!

  Read the article

• Why doesn't my Nvidia driver support 1280*1024?

  - by Alvar

  EDIT: I think the problem is in the NVIDIA x server, that doesn't support an RGB screen from 1990. The screen was the best of them all when it was released. This a strange thing! In windows the EDID must work because 1280*1024 is used as max resolution, but in ubuntu those stuff aren't being received, so how do I tell ubuntu/nivida to find those EDID stuff? Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. The screens model name is IntelliColor Display/20 and the name of the company is "radius".recived Well, twin view is working but the only maximum resolution is 1024*768. I'm using nividas x server program. If I force it to use 1280*1024 it all crashes and I have to force a reboot. alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

  Read the article

• How to Disable Touchpad tap in Toshiba Tecra R850 in Oneiric - it is recognized as a PS/2 mouse

  - by Kibi

  I know there's a lot of similar questions, but nothing I have tried here works yet - perhaps I was doing it wrong. New Laptop - Toshiba Tecra R850 with an install of Oneiric 64 bit. Mostly things are working well, but I have a problem with the touchpad (or whatever it's called) - whenever I use it for moving the mouse pointer I accidentally tap on it - basically I am clicking all over the place by accident. So I want to disable the tap-as-click (after all, I have buttons for clicks too). I open up "Mouse and Touchpad" and on the Touchpad tab I check "Disable touchpad when typing" and UNcheck "Enable mouse clicks with touchpad". This does not achieve anything. Ditto Synaptiks and other similar tools. EDIT OK it turns out that this is a somewhat known problem - it seems the touchpad is not being recognized as a touchpad, it is seen as a PS/2 mouse. So any adjustments made with various settings programs to the "touchpad" don't affect it. I've been looking at solutions for getting the touchpad correctly recognized and not achieved it yet - seems there is a problem at the kernel level...I tried (foolishly) a suggestion to replace the psmouse.ko driver ...this screwed some stuff up and didn't solve my problem. So - anyone know an answer? Thanks Kibi

  Read the article

• Reverse-Engineer Driver for Backlit Keyboard

  - by user87847

  Here's my situation: I recently purchased a Sager NP9170 (same as the Clevo P170EM) and it has a multi-colored, backlit keyboard. Under Windows 7, you can launch an app that allows you to change the color of the backlighting to any of a handful of colors (blue, green, red, etc). I want that same functionality under Linux. I haven't been able to find any software that does this, so I guess I'm going to have to write it myself. I'm a programmer by trade, but I've haven't done much low level programming, and I've certainly never written a device driver, so I was wondering if anyone could answer these two questions: 1) Is there any software already out there that does this sort of thing? I've looked fairly thoroughly but haven't found anything applicable. 2) Where would I start in trying to reverse engineer this sort of thing? Any useful articles, tutorials, books that might help? And just to clarify: The backlighting already works, that's not the problem. I just want to be able to change the color of the backlighting. This functionality is supported by the hardware. The laptop came with windows software that does this and I want the same functionality in Linux. I am willing to write this software myself, I just want to know the best way to go about it. Thanks!

  Read the article

• My sound is not working, so I'm going to reinstall FYI [closed]

  - by fer

  I've had trouble getting the sound to work in Ubuntu 12.04 I'm running an Acer Aspire 5739g laptop. This is using a clean install. This wasn't a problem when ubuntu first installed. Rather, it was when I ran the updates that it stopped working. I already tried the suggestions on the ubuntu sites and other similar queries, and they haven't fixed it. Something in the updates is making my sound not work. Edit: It turns out that this might be a bug (the sound issue, first paragraph). After reinstall, it happened again (it's not caused by updates at all, or any software, because I fixed it now w/o reinstall). It seems like I replicated it as follows: I changed auto-hide in the behavior tab of Appearance settings by turning it on, and setting the sensitivity to below the recommended setting. Then instead of restarting, I just logged out and back in. The sound stopped working again. I set the behavior settings to default, restarted, and now it's back to normal. Not sure if it's due to only logging out (and not restarting) or b/c I set my sensitivity to a low setting. Not sure if this helps anyone, but thought I'd mention it.

  Read the article

• Less graphics power all the sudden (Intel HD 3000)

  - by queueoverflow

  I have a Intel Sandy Bridge i5 with the HD 3000 graphics card. I used to be able to play Urban Terror and Nexuiz comfortably with 85 and 60 frames per seconds until mid/end of October 2012, the former even on a full HD display with that many frames. Now I have around 30 to 45 on the smaller laptop screen and around 20 to 30 on the external monitor. Did something happen to Kubuntu 12.04 so that it has less graphics performance than previously? Update I looked into the system monitor and could not detect anything being at the maximum. The four CPU cores were pretty much bored, the 8 GB RAM were filled with maybe 2 GB. And I ran intel_cpu_top and did not notice anything at its limit. See the output. after Kernel bisecting I now did a kernel bisect and tried 3.2.0-23, 3.2.0-27, 3.2.0-29 and 3.2.0-30 and all had full graphics power. Interestingly, I then had full power when I just booted back into the regular 3.2.0-32 kernel. This does not make sense to me …

  Read the article

• Free Xsigo Technical Pre-sales workshop for Selected Partners !

  - by mseika

  In 2012 Oracle acquired Xsigo, a developer of network I/O virtualisation solutions. This acquisition compliments Oracle’s extensive virtualisation portfolio. With Oracle Virtual Networking products (Xsigo) you can: Virtualise connectivity from any server to any storage and any network. Reduce datacentre complexity by 70% Cut infrastructure expenses by up to 50% Benefits to Channel Partners: Offer a unique proposition that your competitors can’t match. Provide an innovative solution that delivers more performance at less cost. High margins that help sell more products and services. This course is aimed at Technical Pre-Sales Consultants equipping them to provide detailed demos, and architect RFP feedback and customer solutions. The language of this event is French. WHEN24th September 2013 WHEREOracle France 15, boulevard Charles De Gaulle92715 COLOMBES FEESFree of charge 09.00: Welcome, Coffee & Introduction 09.30: Value Propositions, Architecture & Use Cases 11.30: Build a OVN Web Quote & TCO 12.30: Lunch 13.30: Competitive Summary 14.00: Design Scenario Workshop 15.45: Questions/Opportunities  REGISTRATION: Register via this link as soon as possible, 14th june, latest. Note that we have only 20 seats in total for this event. Note that after 14th june we will release free seats for other organizations to register. We look forward to your participation! What we expect from you: You will bring your own laptop. Recommended browser is Firefox 10 ESR. You have checked the material and conducted the assessments. You will be flexible in terms of Agenda and Progress as we intend this to be more of a Workshop having Dialogue rather than sticking tightly into the tentative timeline. What this is not: This PartnerLab does not replace Oracle University Trainings. This PartnerLab does not lead to a Certification as such. This PartnerLab does not enable Partners to full and complete implementation skills.

  Read the article

• Installing Windows from Ubuntu while booting only from the hard drive

  - by WindowsEscapist

  My problem is unrelated to this workaround (the question) here, but the end result is that I cannot change boot order (or use a boot menu) on my laptop. It is currently running Ubuntu 12.04 with a dual-boot to Fedora if anything goes catastrophically wrong with Ubuntu (read "if I mess it up"). I would really like to install Windows 7 (but XP would be fine) on an empty FAT32 partition I have already made because of issues with WINE-emulated programs running more slowly than under Windows. The problem is, I can only boot from my hard drive. I can boot from other devices by removing the hard drive, but this is irrelevant because SATA is non-hotpluggable (I can't plug it back in to install). Is there any way I could boot up a Windows installer CD (or other CDs)? (I know how to keep my Linux distros.) I have both the .iso's and the physical CDs (or can obtain them). This may be unneeded, but just as a disclaimer this is completely legal. The computer belongs to me, I have admin privs, etc. I'm not doing anything shady!

  Read the article

• display driver problem

  - by Robert

  I just recently installed Ubuntu 12.10 on my laptop and am keeping windows 7 as a back up for when I get stuck like now..... After I installed Ubuntu I got on line and was reading about some of the things to do after Installing for the first time. One of them was looking for additional drivers witch I did and found two display drivers. Both drivers were from Ubuntu. However after install and a reboot I can't see any of my menu bars.....no app bar on the side.....no bar at the top of the display...nothing. I did have a file on the desktop that I was able to open. And I just learned that ctrl+alt+T gets me a form of command prompt. this worked but I don't know how to use it. How do I get my menu bars back?? is there a way to uninstall the drivers? I am really new to Ubuntu and like it so far but am having problems getting over the learning curve.

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >