Search Results

Search found 8343 results on 334 pages for 'laptop disasters'.

Page 281/334 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• slow virtualbox guest

  - by ecoologic

  I run a guest ubuntu 12.04 on a host ubuntu 12.04, with virtual box, and the guest is much, much slower than the host (ALT+TAB costs 4-5secs). I had a look around and I found contradicting opinions on virtualbox vs vmware (free), so I taught to keep the former. Both systems are updated, I installed the additions on the guest and I evenly split memory and video memory (64mb) between guest and host. I am running a toshiba m200 laptop with 4GB ram and shared video memory. The host bios does not include a configuration option for machine virtualization. I have 2 cpus and I can't give them both to the vm. Is there anything I overlooked that could solve my problem? Feel free to ask for more info, and thank you for any help. EDIT Idling with the monitor open the (single) guest cpu never gets below 55% and could raise to 80 - 90% just moving the mouse around, opening ff will cause the monitor to run 100% in the guest, while the host shows that both cpus are evenly working around 60%. My cpu is Intel® Core™2 Duo CPU T5450 @ 1.66GHz × 2. If this is not a configuration problem, does it mean my machine is too weak for virtualization?

  Read the article

• Broadcom Wireless Issues in Lubuntu 14.04

  - by ratxinxaxcage67

  I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

  Read the article

• Ubuntu is not detecting my android device

  - by user3514160

  I am new to android. I have just downloaded and installed android sdk. Now when I run the application from eclipse, my device is not getting detected. I have googled and was brought up with this as my solution, but that also didn't worked. Here's the 51-android.rules SUBSYSTEMS=="usb", ATTR{idProduct}=="0bb4", ATTR{idProduct}=="0c03", MODE="0666", GROUP="plugindev", OWNER="<username>" After that I rebooted my laptop, and ran this command: username@laptopname:~/Android/adt-bundle/sdk/platform-tools$ adb devices The output i get is: * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached ???????????? no permissions EDIT crazydeveloper@crazydeveloper:~$ lsusb Bus 002 Device 004: ID 0bb4:0c03 HTC (High Tech Computer Corp.) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b337 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/004/ ls: cannot access /dev/bus/usb/004/: No such file or directory crazydeveloper@crazydeveloper:~$ Edit: 2 After the answer submitted here's the output that i got: crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/002 total 0 crw-rw-r-- 1 root root 189, 128 May 7 09:45 001 crw-rw-r--+ 1 root root 189, 129 May 7 09:45 002 crw-rw-rw- 1 root plugdev 189, 130 May 7 09:48 003 I am using Micromax Canvas 2.2 A114 - Android Version 4.2.2 Please help me. Thanks.

  Read the article

• Ubuntu 11.10 w/ Cinnamon - Icons are gone and pictures do not display

  - by B U N N Y

  I'm new on this site and new to using Ubuntu and all. I currently have Ubuntu 11.10 and Cinnamon along with it. I've recently downloaded only a few applications, like the Adobe shockwave as well as a few games. After the downloads, the icons for the windows (the close, minimize, and maximize) are nothing but streaks of colours, and now just plain black, picture previews in my picture folder is gone, some icons on the panels are missing, and icons in the control center are gone. I'm sure more are gone, but that's the ones that I see often. I'm not sure what caused this to happen?? Please get back to me soon! I'm worried about what has happened. ): This is my only laptop to get online. I have no other way besides the library but that takes too long.. EDIT: Okay, I had asked my sister for some help and she helped me restore my minimize, maximize, and close button but I still haven't figured out how to show the icons in the cinnamon dock (which I have set at the top of the window) and how to have my pictures show up again. All of my pictures are just blank and I can't even preview them. They still have their file names but that is it. I'm not sure what has happened. I haven't downloaded any new apps as of the new edit.

  Read the article

• Brightness going up to 100% on loading certain websites in Chrome

  - by picheto

  I'm using Google Chrome version 21.0.1180.89 on Ubuntu 12.04 and my laptop is a Sony VAIO VPCCW15FL (spec sheet). My video driver is the propietary "NVIDIA accelerated graphics driver (post-release updates)(version-current updates)". After installing Ubuntu, I discovered that neither the brightness control buttons (hardware) or the brightness slider (software) worked, and found out I could get the hardware buttons to work by installing the nvidiabl.deb package and oBacklight script. I'm using nvidiabl-dkms 0.77 and oBacklight 0.3.8. Still, the slider on the Ubuntu "Settings" does not work, but I don't care. There is an annoying thing happening when loading certain pages in Google Chrome: the brightness goes up to 100% when loading the webpage or when leaving it (closing the tab or typing a different URL on the omnibox). However, the "brightness tooltip" (that default brightness notification) remembers the position it was set to, so if I adjust the brightness with the HW buttons, the level gets adjusted relative to the value it was set to before "going 100%". I disabled the flash PPAPI plugin, but left the NPAPI plugin enabled, and the problem went away for pages with flash content. Still, the same thing happens when viewing HTML5 video, or when loading, for example, the Chrome Web Store or using the Scratchpad extension. I suppose it has to do with the rendering of certain elements using the GPU, but this is just a guess. This brightness thing does not happen when using Firefox 15.0 or any other application I have used yet. Does anybody know why this may be happening and what could I do to fix this without changing browser? Thanks a lot.

  Read the article

• How can I get SLI working with 295.40?

  - by Steve

  I've been doing a lot of googling these last few hours and I'm not having much luck. Perhaps I don't know exactly what I am looking for. I just recently installed Ubuntu 12.04LTS x86_64. Looks beautiful! I have two GTX470's in SLI, and I am finally migrating my desktop over given the hopeful gaming support as of late. My laptop has been enjoying multiple distros of Ubuntu for a couple years now. However, new problems come with unexplored territory, here. At first, I only had one working monitor of my two. Over on nvidia-xconfig I fixed that, but the only solution that actually worked was twinview. Just recently I read here that twinview is not compatible with SLI. Sweet. When I try to tell it, oh hey, use a separate XScreen, configure it the way I want it, click save to configuration file, enter my password, then a sudo restart lightdm, it's broken. One screen blacks or whites out (Couldn't tell you the specific conditions for each, I'm dubious at this point,) and I get this huge error dialogue box upon login. Something about incompatible resolutions if I remember right. Though I am sure I set the resolutions for each screen correctly. Anyway, when I try to enable SLI (sudo nvidia-xconfig --sli=On) despite the fact it hates twinview, unity breaks. The sidebar is there, but only one screen works, the mouse is trapped running along the left edge of it, and the background of the sidebar is a solid blue. Anyway, this ended up being entirely too verbose, I'm sorry, but could anyone part some wisdom please? It would be appreciated!

  Read the article

• Microsoft Access as a Weapon of War

  - by Damon

  A while ago (probably a decade ago, actually) I saw a report on a tracking system maintained by a U.S. Army artillery control unit.  This system was capable of maintaining a bearing on various units in the field to help avoid friendly fire.  I consider the U.S. Army to be the most technologically advanced fighting force on Earth, but to my terror I saw something on the title bar of an application displayed on a laptop behind one of the soldiers they were interviewing: Tracking.mdb Oh yes.  Microsoft Office Suite had made it onto the battlefield.  My hope is that it was just running as a front-end for a more proficient database (no offense Access people), or that the soldier was tracking something else like KP duty or fantasy football scores.  But I could also see the corporate equivalent of a pointy-haired boss walking into a cube and asking someone who had piddled with Access to build a database for HR forms.  Except this pointy-haired boss would have been a general, the cube would have been a tank, and the HR forms would have been targets that, if something went amiss, would have been hit by a 500lb artillery round. Hope that solider could write a good query :)

  Read the article

• Dualboot (Win 8 / Ubuntu 13) is stuck at 'switching to clocksource'

  - by Daniel Puscht

  for days I have been crawling the web for solutions to my problem, but couln't find any. Here it is: I got a new Laptop (ASUS Vivobook S200E) with Win 8 OEM preinstalled. I wanted to create a dual-boot system with Ubuntu 13 next to it. I read about UEFI and that I have to turn of Secure Boot and use the existing EFI partition as bootloader for Ubuntu. So I did. I also ran boot-repair reinstalling the GRUB. The result is when I start the computer I get into the boot menu. So far, so good. When I pick Win everthing is fine. But when I choose Ubuntu (recovery) the system starts, but gets stuck at the line '[1.806366] Switching to clocksource tsc'. I already tried other versions of Ubuntu (12.04.2, 12.10). I played with boot-repair (using the recommended fix, setting everything manually). But nothing works. It's always the same issue. I read that it could be a problem concerning graphic drivers, but this I can hardly believe. If this is any help, boot-repair gave me this link to post in fora. http://paste.ubuntu.com/5810391/ Thanks for any help in advance

  Read the article

• Broken Package on Update Manager

  - by Widy Graycloud

  I dont know what's wrong with my update manager.. It says that the softwares that I installed was broken. Maybe because I force shutdown my laptop, because Ubuntu wont shutdown,showing up desktop wallpaper but not title bar and launcher, but It won't shut down (+that's another bug). I've just update the broken softwares. the size is 60 to 70 MB.. But It doesn't work. Now I cannot update or install any software from Update Manager or Ubuntu Software Center. Can anybody tellme what's wrong? This is what appears when I use Update Manager I use Ubuntu Software Center, and this message appeared I chose repair and when it update the broken softwares using Ubuntu Software Center. It failed. And show up this message. The problem is I can't update or install any program from Ubuntu Software Center and Device Manager anymore. (I closed allprograms include ubuntu software center,and device manager in this case). Some one helpme? I tried to use apt-get install -f in terminal but it shows message like this: E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?

  Read the article

• ubuntu 10.04: boot error for custom compiled kernel - gave up wating for root device

  - by atharva

  Hi, I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platoform) and it is working fine. Now I have compiled kernel 2.6.37 from the downloaded from the kernel tree. I followed usual procedure of compileing kernel (make menuconfig,make. make modules etc). Then I created the initrd image using mkinitramfs and updated my grub using upadate grub command. Update-grub detects the initrd image of the compiled kernel. However when I boot from this kernel it gives me following error: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -Check rootdelay= (did the system wait long enough?) -Check root= (did the system wait for the right device?) -Missing modules (cat /proc/modules; ls /dev) ALERT! root=UUID=/... does not exist and then it falls onto initramfs prompt. I have tried following solutions discussed in different ubuntu forums: 1. disable uuid and point root=/dev/sda8 (sda8 is where my kernele image resides (both default kernel and compiled one) from /etc/default/grub 2. compile kernel using CONFIG_DEVTMPFS=y suggested here Still I am unable to boot from the compile kernel. Could someone please suggest me the solution ?

  Read the article

• Just installed 13.10 and everything is fine except I cannot connect to the internet. Any thoughts?

  - by razorccatu

  I just installed Ubuntu 13.10 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

  Read the article

• Unity elements sometimes appear while full screen in Virtualbox - how to stop it?

  - by frumbert

  Launcher is great, and it helps me finds stuff. I have the latest release of 12. But when I'm full screen in VirtualBox running another operating system and I hit some key combination I haven't yet figured out, Unity suddenly grabs keyboard focus. It might be alt-tab, it might be left-control x. I have physically pulled both the windows key and FN key off my laptop because they get in the way, so it's probably not the windows key. You don't know the focus has been stolen because the full screen app (VirtualBox) is still full screen and the Unity element is in the background. But you're busy typing into a Unity box, not your foreground application. This is particularly annoying. In my screenshot (taken from a camera, because the built in screen capture program can't capture a screenshot containing the launcher...) the windows VM is the foreground application, but the "Run Command" entry box has come up and is capturing the keyboard: I would like a foreground full screen app to stay that way. Is there a way that I can keep Unity but only have it activate its elements (e.g. pop out with its search box) if I physically click a button, not type some random key combination that foreground applications can get confused about? Otherwise I can do without the launcher or other elements, because doing my actual work is more involved than just launching programs.

  Read the article

• Upgrading to 12.10 on an external hard drive

  - by Tom Childers

  I did some googling on this and didn't find anything specific for my situation. I currently have 12.04 installed on an external USB hard drive. It's working great. I want to upgrade it to 12.10. My bandwidth is very limited so I have a friend who will download 12.10 for me and put it on a flash stik. Then I can upgrade without having to do the download myself. Which particular version of the 12.10 download file(s) should I get? Are there alternate 12.10 downloads that have all the packages? How do I set it up so when I upgrade 12.04 I can specify that it look in some local repository for the 12.10 files? Can I just dump the 12.10 files in some local directory? Or do I have do go thru some complex commands to create a local repository? I'm pretty new to Linux so a long process of complex terminal commands will probably be a show stopper for me. Remember that my 12.04 install resides on an external hard drive. And I have a laptop with multiple USB ports. Thanks! Advait

  Read the article

• Launcher sometimes appears while full screen in VM (virtaulbox) - how to stop it?

  - by frumbert

  Launcher is great, and it helps me finds stuff. I have the latest release of 12. But when I'm full screen in VirtualBox running another operating system and I hit some key combination I haven't yet figured out, Laucher suddenly grabs keyboard focus. It might be alt-tab, it might be left-control x. I have physically pulled both the windows key and FN key off my laptop because they get in the way, so it's probably not the windows key. You don't know the focus has been stolen because the full screen app (VirtualBox) is still full screen and launcher is in the background. But you're busy typing into a laucher search box, not your foreground application. This is particularly annoying. In my screenshot (taken from a camera, because the built in screen capture program can't capture a screenshot containing the launcher...) the windows VM is the foreground application, but the launcher has come up and is capturing the keyboard: http://imgur.com/SrMRr I would like a foreground full screen app to stay that way. Is there a way that I can keep the launcher but only have it activate (e.g. pop out with its search box) if I physically click the button, not type some random key combination that foreground applications can get confused about? Otherwise I can do without the launcher, because doing my actual work is more involved than just launching programs.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Mobile development, recommended computer configuration?

  - by MikaelW

  Hi, For the last 4 weeks, I have been trying to get into mobile development. Done a couple of tutorials, read some books, developed a couple of dummy Android apps. The thing is my computer is a 5 years old laptop, it is slow and time has come to replace it and I’m looking at different offers online. Have you got any recommendations? Is there any must-have that should make my developer life easier in the future? Is there anything specific that may be useful at a more advanced stage of development that I just can’t think of right now on the hardware side? (I mean apart from good proc, lots of RAM, many USB ports...) One thing I can think of is to have three OS on the same workstation: Windows, Unix and MacOS (so far I focused on android/java/eclipse but am interested in Iphone/objC/xcode as well) but that’s more on the software side. Anyway, would be grateful for any recommendations. Thanks in advance! Mikael PS: I’m quite free on the budget side of things PPS: I'm aware it's not really a programming question but will still be of interest to some programmers here.

  Read the article

• Windows 8.1 - unfixable grub

  - by Nick

  I have a Gigabyte laptop that came with secure boot and windows 8. After a bit of battling, I managed to get my dual boot with Ubuntu 13.10.. Anyway, I upgraded zindows to 8.1, now grub is gone. I restarted from a live CD and chrooted to my drive. I used boot-repair multiple times (with successful output) both in default and with some advanced options; also reinstalled grub manually... Each time it tries once to boot to grub but gives a message for a very short amount of time. I recorded it and it is a regular bios message "Rebbot and Select proper Boot device of Insert Boot media in selected boot device and press a key" I even tried something called EasyBCD under winblows, it shows the correct boot options, but same there, it is unable to make the linux partition fire up. Anyway, no way to boot my linux box. Does anyone have an idea how to fix this? No need to redirect me to another post with grub reinstall or boot-repair, seen them all... I am thinking of trying this other boot loader, refind, to see if it works http://www.rodsbooks.com/refind/index.html Also re-reading this bios message, I'm thinking my partition might not have a boot flag anymore... I'll try that too with parted. Although both grub and win 8 are supposed to fire up from the same boot partition (the EFI one) Please help! thx

  Read the article

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• "Misaligned partition" - Should I do repartition (how?)

  - by RndmUbuntuAmateur

  Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

  Read the article

• How to ensure nvidia_current module loads during boot

  - by Aras

  I am running Ubuntu 12.10 on an Asus G75V laptop with nvidia gforce GTX 660M. I first run 12.04 on this machine and was able to install nvidia_current drivers from swat ppa: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current This worked in 12.04 and after rebooting the machine my graphics where working properly. After upgrade to 12.10 however, the machine boots into a low resolution desktop which I can not really interact with. I suspect this is due to the driver not being loaded properly. To fix this, I have to switch to ctrl+alt+F1 session and manually load the nvidia_current module and restart the desktop manager: sudo modprobe nvidia_current sudo service lightdm restart Now everything works fine again. However, I would like not to have to do this every time I reboot the machine. I also dont want to hack an script to do this on load. Basically, if things are setup currectly, the nvidia_current driver which is installed should load. How can I make sure nvidia_current driver module loads properly when system starts?

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

• How do I partition my Hard drive to install Kubuntu?

  - by Xdflames

  I am a complete newbie to partitioning and I would like some guidance here. Can anyone explain what exactly I should be doing here? I am installing Kubuntu 12.04 on a currently Windows 7 laptop. My current Partitions say this: /dev/sda /dev/sda1 ntfs 104 MB 35 MB /dev/sda2 ntfs 319965 MB 87164 MB Basically, what I want is some guidance on what exactly to do here. All I want is a partition for my OS (Which will be Kubuntu 12.04) and a partition for all of my data. I also want to restart fresh with my hard drive, with only what I mentioned on here. I am installing Kubuntu from a flash drive (I set it up as a bootable device with Universal-USB-Installer-1.9.0.9), as I do not have any blank CDs/DVDs to burn to. What should I name my partitions? What should I set the type as? What size do they need to be? Edit: My hard drive is 320GB. Just looked it up in my BIOS. This computer will mainly be used for internet browsing and overall just messing around with the Linux OS.

  Read the article

• Why does my mic boost automatically go to 100 on every boot?

  - by Ben

  When my computer turns on, it automatically sets the "mic boost" sound setting to 100. This causes a loud static sound in my speakers. I can manually go to alsamixer and turn the mic boost down manually, but I would prefer it if I didn't have to do this every time I turn the computer on. I've tried running sudo alsactl store after fixing the settings, and this does save them, but I have to run sudo alsactl restore to restore the settings. This means that I have to manually fix the sound every time I start the computer anyway, so it isn't really a fix. I tried putting sudo alsactl restore in my startup programs, but that didn't seem to fix anything. I'm running Ubuntu 12.04, but I started having this problem before upgrading from 11.10. I'm using a Sony Vaio laptop. I'm not really sure what made it start; it seemed like I just started having the problem randomly one day. Any help would be appreciated! Edit: here is the output from running amixer: http://paste.ubuntu.com/1060080/

  Read the article

• Driver for asus wireless PC card WL-100GE

  - by emab

  I have bought an Asus wireless LAN PC Card WL-100GE model, and I am using lubuntu on my system. While I have no cable connection, currently I cannot access the internet and update my laptop. Device: Broad Range Wireless Card Bus Adaptor - Asus - WL-100GE I searched the web and couldn't find any adequate driver for it. Is there any solution for it? My sudo lshw -C network output is: *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:02:3f:ba:55:c8 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=128 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:3000(size=256) memory:e0200800-e02008ff *-network description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:07:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:21 memory:38000000-38001fff ----:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Unable to detect windows hard drive while running Ubuntu 12.04 from USB

  - by eapen jacob

  I am completely new to Ubuntu. I experimented with Ubuntu 12.04 by running it from a USB drive, in-order to recover files from my hard disc. History: My laptop is an IBM R60 running windows 7. Suddenly it gave me an error stating "error 2100 - Hard drive initialization error". I have read all the forums and most of them suggested that I remove and replace my HDD and that did not work. And one site suggested to try using Ubuntu to recover files. I booted my system from USB, and once Ubuntu came up, I choose "Try Ubuntu". It came up fine and I was able to surf ,and do other things, etc. I was unable to to access my files which are on the hard disc and "Attached Devices" is grayed out. 1- Is there any way to gain access to my hard disc to recover the files? How do I navigate to search for my files. 2- Is it just simply not possible if the hard disc themselves are not working? Is that why I`m unable to find the drives. I know its a very novice question, but hoping someone would help me out. Thank you, Eapen

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >