Search Results

Search found 7044 results on 282 pages for 'monitor stand'.

Page 281/282 | < Previous Page | 277 278 279 280 281 282  | Next Page >

• How to set up linux watchdog daemon with Intel 6300esb

  - by ACiD GRiM

  I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

  Read the article

• Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe Irony

  - by Kyle Noland

  I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

  Read the article

• How can I create a weekly calendar view for an Android Honeycomb application?

  - by BVB

  I am working on an Android (v3.0) application that has a requirement of mimicking the weekly calendar layout found on Google Calendar: The events will be based on external requests through the Google Calendar API (I already have this part working). Using the API, I can obtain a list of events for the week, with each event having a starting and and ending datetime. I would like to use this data to show the scheduled events to the application's users in a view similar to the one above. Here's what I have so far: The XML appears below: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="800dp" android:layout_height="match_parent" android:orientation="vertical" > <TextView android:id="@+id/textView1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Calendar Title" android:textAppearance="?android:attr/textAppearanceLarge" /> <RelativeLayout android:id="@+id/relativeLayout1" android:layout_width="match_parent" android:layout_height="wrap_content" > <LinearLayout android:id="@+id/linearLayout1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentLeft="true" android:layout_alignParentRight="true" android:layout_alignParentTop="true" > <TextView android:id="@+id/textView2" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="1" android:text="" /> <TextView android:id="@+id/textView3" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Sunday" /> <TextView android:id="@+id/textView4" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Monday" /> <TextView android:id="@+id/textView5" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Tuesday" /> <TextView android:id="@+id/textView6" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Wednesday" /> <TextView android:id="@+id/textView7" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Thursday" /> <TextView android:id="@+id/textView8" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Friday" /> <TextView android:id="@+id/textView9" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_weight="2" android:gravity="center" android:text="Saturday" /> </LinearLayout> </RelativeLayout> <ScrollView android:id="@+id/scrollView1" android:layout_width="match_parent" android:layout_height="match_parent" android:padding="0dp" android:scrollbars="none" >" <RelativeLayout android:id="@+id/relativeLayout242" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="0dp" > <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="0dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="40dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="80dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="120dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="160dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="200dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="240dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="280dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="320dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="360dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="400dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="440dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="480dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="520dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="560dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="600dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="640dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="680dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="720dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="760dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="800dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="840dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="880dp"/> <View android:background="#aaa" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="920dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="20dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="60dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="100dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="140dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="180dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="220dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="260dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="300dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="340dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="380dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="420dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="460dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="500dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="540dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="580dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="620dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="660dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="700dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="740dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="780dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="820dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="860dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="900dp"/> <View android:background="#777" android:layout_width = "fill_parent" android:layout_height="1dp" android:layout_marginTop="940dp"/> <LinearLayout android:id="@+id/linearLayout2" android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="0dp" > <RelativeLayout android:id="@+id/relativeLayout2" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" android:padding="0dp" > <View android:background="#aaa" android:layout_width = "1dp" android:layout_height="fill_parent" android:layout_alignParentRight="true"/> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="0dp" android:gravity="center" android:text="12am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="40dp" android:gravity="center" android:text="1am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="80dp" android:gravity="center" android:text="2am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="120dp" android:gravity="center" android:text="3am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="160dp" android:gravity="center" android:text="4am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="200dp" android:gravity="center" android:text="5am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="240dp" android:gravity="center" android:text="6am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="280dp" android:gravity="center" android:text="7am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="320dp" android:gravity="center" android:text="8am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="360dp" android:gravity="center" android:text="9am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="400dp" android:gravity="center" android:text="10am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="440dp" android:gravity="center" android:text="11am" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="480dp" android:gravity="center" android:text="12pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="520dp" android:gravity="center" android:text="1pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="560dp" android:gravity="center" android:text="2pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="600dp" android:gravity="center" android:text="3pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="640dp" android:gravity="center" android:text="4pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="680dp" android:gravity="center" android:text="5pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="720dp" android:gravity="center" android:text="6pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="760dp" android:gravity="center" android:text="7pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="800dp" android:gravity="center" android:text="8pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="840dp" android:gravity="center" android:text="9pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="880dp" android:gravity="center" android:text="10pm" /> <TextView android:id="@+id/textView10" android:layout_width="match_parent" android:layout_height="40dp" android:layout_marginTop="920dp" android:gravity="center|top" android:text="11pm" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout3" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="14" android:padding="0dp" > <LinearLayout android:id="@+id/linearLayout3" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_alignParentLeft="true" android:layout_alignParentRight="true" android:layout_alignParentTop="true" android:padding="0dp" > <RelativeLayout android:id="@+id/relativeLayout4" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="180dp" android:layout_marginTop="180dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="180dp" android:layout_marginTop="180dp" android:text="Some Event" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout5" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="180dp" android:layout_marginTop="280dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="180dp" android:layout_marginTop="280dp" android:text="Some Event" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout6" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="60dp" android:layout_marginTop="40dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="60dp" android:layout_marginTop="40dp" android:text="Some Event" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout7" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="90dp" android:layout_marginTop="60dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="90dp" android:layout_marginTop="60dp" android:text="Some Event" /> <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="120dp" android:layout_marginTop="340dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="120dp" android:layout_marginTop="340dp" android:text="Some Event" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout8" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="180dp" android:layout_marginTop="380dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="180dp" android:layout_marginTop="380dp" android:text="Some Event" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout9" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="180dp" android:layout_marginTop="480dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="180dp" android:layout_marginTop="480dp" android:text="Some Event" /> </RelativeLayout> <RelativeLayout android:id="@+id/relativeLayout10" android:layout_width="0dp" android:layout_height="match_parent" android:layout_weight="1" > <View android:background="#00f" android:layout_width = "fill_parent" android:layout_height="180dp" android:layout_marginTop="340dp"/> <Button android:id="@+id/button1" android:layout_width="fill_parent" android:layout_height="180dp" android:layout_marginTop="340dp" android:text="Some Event" /> </RelativeLayout> </LinearLayout> </RelativeLayout> </LinearLayout> </RelativeLayout> </ScrollView> </LinearLayout> My approach was to make 40dp equal to 1 hr of time. Thus, whenever I would like to add an event that has a duration of 1.5 hours, I will make an 60dp button that I will place at the exact location that the time begins (12am = 0dp from the top, 1pm = 40dp from the top, 2pm = 80d from the top, etc). My questions are: Is there a better way of doing this? How can I convert my XML to be stand-alone view that could be added to any Android project? (I plan on perhaps making a blog post about the end product) Thank you!

  Read the article

• Bulk inserting best way to about it? + Helping me understand fully what I found so far

  - by chobo2

  Hi So I saw this post here and read it and it seems like bulk copy might be the way to go. http://stackoverflow.com/questions/682015/whats-the-best-way-to-bulk-database-inserts-from-c I still have some questions and want to know how things actually work. So I found 2 tutorials. http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx First way uses 2 ado.net 2.0 features. BulkInsert and BulkCopy. the second one uses linq to sql and OpenXML. This sort of appeals to me as I am using linq to sql already and prefer it over ado.net. However as one person pointed out in the posts what he just going around the issue at the cost of performance( nothing wrong with that in my opinion) First I will talk about the 2 ways in the first tutorial I am using VS2010 Express, .net 4.0, MVC 2.0, SQl Server 2005 Is ado.net 2.0 the most current version? Based on the technology I am using, is there some updates to what I am going to show that would improve it somehow? Is there any thing that these tutorial left out that I should know about? BulkInsert I am using this table for all the examples. CREATE TABLE [dbo].[TBL_TEST_TEST] ( ID INT IDENTITY(1,1) PRIMARY KEY, [NAME] [varchar](50) ) SP Code USE [Test] GO /****** Object: StoredProcedure [dbo].[sp_BatchInsert] Script Date: 05/19/2010 15:12:47 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[sp_BatchInsert] (@Name VARCHAR(50) ) AS BEGIN INSERT INTO TBL_TEST_TEST VALUES (@Name); END C# Code /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 1000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } So first thing is the batch size. Why would you set a batch size to anything but the number of records you are sending? Like I am sending 500,000 records so I did a Batch size of 500,000. Next why does it crash when I do this? If I set it to 1000 for batch size it works just fine. System.Data.SqlClient.SqlException was unhandled Message="A transport-level error has occurred when sending the request to the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=20 LineNumber=0 Number=233 Server="" State=0 StackTrace: at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataTable dataTable) at TestIQueryable.Program.BatchInsert() in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 124 at TestIQueryable.Program.Main(String[] args) in C:\Users\a\Downloads\TestIQueryable\TestIQueryable\TestIQueryable\Program.cs:line 16 InnerException: Time it took to insert 500,000 records with insert batch size of 1000 took "2 mins and 54 seconds" Of course this is no official time I sat there with a stop watch( I am sure there are better ways but was too lazy to look what they where) So I find that kinda slow compared to all my other ones(expect the linq to sql insert one) and I am not really sure why. Next I looked at bulkcopy /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } This one seemed to go really fast and did not even need a SP( can you use SP with bulk copy? If you can would it be better?) BatchCopy had no problem with a 500,000 batch size.So again why make it smaller then the number of records you want to send? I found that with BatchCopy and 500,000 batch size it took only 5 seconds to complete. I then tried with a batch size of 1,000 and it only took 8 seconds. So much faster then the bulkinsert one above. Now I tried the other tutorial. USE [Test] GO /****** Object: StoredProcedure [dbo].[spTEST_InsertXMLTEST_TEST] Script Date: 05/19/2010 15:39:03 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[spTEST_InsertXMLTEST_TEST](@UpdatedProdData nText) AS DECLARE @hDoc int exec sp_xml_preparedocument @hDoc OUTPUT,@UpdatedProdData INSERT INTO TBL_TEST_TEST(NAME) SELECT XMLProdTable.NAME FROM OPENXML(@hDoc, 'ArrayOfTBL_TEST_TEST/TBL_TEST_TEST', 2) WITH ( ID Int, NAME varchar(100) ) XMLProdTable EXEC sp_xml_removedocument @hDoc C# code. /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } So I like this because I get to use objects even though it is kinda redundant. I don't get how the SP works. Like I don't get the whole thing. I don't know if OPENXML has some batch insert under the hood but I do not even know how to take this example SP and change it to fit my tables since like I said I don't know what is going on. I also don't know what would happen if the object you have more tables in it. Like say I have a ProductName table what has a relationship to a Product table or something like that. In linq to sql you could get the product name object and make changes to the Product table in that same object. So I am not sure how to take that into account. I am not sure if I would have to do separate inserts or what. The time was pretty good for 500,000 records it took 52 seconds The last way of course was just using linq to do it all and it was pretty bad. /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } I did only 50,000 records and that took over a minute to do. So I really narrowed it done to the linq to sql bulk insert way or bulk copy. I am just not sure how to do it when you have relationship for either way. I am not sure how they both stand up when doing updates instead of inserts as I have not gotten around to try it yet. I don't think I will ever need to insert/update more than 50,000 records at one type but at the same time I know I will have to do validation on records before inserting so that will slow it down and that sort of makes linq to sql nicer as your got objects especially if your first parsing data from a xml file before you insert into the database. Full C# code using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml.Serialization; using System.Data; using System.Data.SqlClient; namespace TestIQueryable { class Program { private static string connectionString = ""; static void Main(string[] args) { BatchInsert(); Console.WriteLine("done"); } /// <summary> /// This is using linq to sql to to insert lots of records. /// This way is slow as it uses no mass insert. /// Only tried to insert 50,000 records as I did not want to sit around till it did 500,000 records. /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertAll() { using (TestDataContext db = new TestDataContext()) { db.CommandTimeout = 600; for (int count = 0; count < 50000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; db.TBL_TEST_TESTs.InsertOnSubmit(testRecord); } db.SubmitChanges(); } } /// <summary> /// This is using linq to sql to make the table objects. /// It is then serailzed to to an xml document and sent to a stored proedure /// that then does a bulk insert(I think with OpenXML) /// http://www.codeproject.com/KB/linq/BulkOperations_LinqToSQL.aspx /// </summary> private static void LinqInsertXMLBatch() { using (TestDataContext db = new TestDataContext()) { TBL_TEST_TEST[] testRecords = new TBL_TEST_TEST[500000]; for (int count = 0; count < 500000; count++) { TBL_TEST_TEST testRecord = new TBL_TEST_TEST(); testRecord.NAME = "Name : " + count; testRecords[count] = testRecord; } StringBuilder sBuilder = new StringBuilder(); System.IO.StringWriter sWriter = new System.IO.StringWriter(sBuilder); XmlSerializer serializer = new XmlSerializer(typeof(TBL_TEST_TEST[])); serializer.Serialize(sWriter, testRecords); db.insertTestData(sBuilder.ToString()); } } /// <summary> /// An ado.net 2.0 way to mass insert records. This seems to be the fastest. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchBulkCopy() { // Get the DataTable DataTable dtInsertRows = GetDataTable(); using (SqlBulkCopy sbc = new SqlBulkCopy(connectionString, SqlBulkCopyOptions.KeepIdentity)) { sbc.DestinationTableName = "TBL_TEST_TEST"; // Number of records to be processed in one go sbc.BatchSize = 500000; // Map the Source Column from DataTabel to the Destination Columns in SQL Server 2005 Person Table // sbc.ColumnMappings.Add("ID", "ID"); sbc.ColumnMappings.Add("NAME", "NAME"); // Number of records after which client has to be notified about its status sbc.NotifyAfter = dtInsertRows.Rows.Count; // Event that gets fired when NotifyAfter number of records are processed. sbc.SqlRowsCopied += new SqlRowsCopiedEventHandler(sbc_SqlRowsCopied); // Finally write to server sbc.WriteToServer(dtInsertRows); sbc.Close(); } } /// <summary> /// Another ado.net 2.0 way that uses a stored procedure to do a bulk insert. /// Seems slower then "BatchBulkCopy" way and it crashes when you try to insert 500,000 records in one go. /// http://www.codeproject.com/KB/cs/MultipleInsertsIn1dbTrip.aspx#_Toc196622241 /// </summary> private static void BatchInsert() { // Get the DataTable with Rows State as RowState.Added DataTable dtInsertRows = GetDataTable(); SqlConnection connection = new SqlConnection(connectionString); SqlCommand command = new SqlCommand("sp_BatchInsert", connection); command.CommandType = CommandType.StoredProcedure; command.UpdatedRowSource = UpdateRowSource.None; // Set the Parameter with appropriate Source Column Name command.Parameters.Add("@Name", SqlDbType.VarChar, 50, dtInsertRows.Columns[0].ColumnName); SqlDataAdapter adpt = new SqlDataAdapter(); adpt.InsertCommand = command; // Specify the number of records to be Inserted/Updated in one go. Default is 1. adpt.UpdateBatchSize = 500000; connection.Open(); int recordsInserted = adpt.Update(dtInsertRows); connection.Close(); } private static DataTable GetDataTable() { // You First need a DataTable and have all the insert values in it DataTable dtInsertRows = new DataTable(); dtInsertRows.Columns.Add("NAME"); for (int i = 0; i < 500000; i++) { DataRow drInsertRow = dtInsertRows.NewRow(); string name = "Name : " + i; drInsertRow["NAME"] = name; dtInsertRows.Rows.Add(drInsertRow); } return dtInsertRows; } static void sbc_SqlRowsCopied(object sender, SqlRowsCopiedEventArgs e) { Console.WriteLine("Number of records affected : " + e.RowsCopied.ToString()); } } }

  Read the article

• E-Business Suite Technology Sessions at OpenWorld 2012

  - by Max Arderius

  Oracle OpenWorld 2012 is almost here! We're looking forward to updating you on our products, strategy, and roadmaps. This year, the E-Business Suite Applications Technology Group (ATG) will participate in 25 speaker sessions, two Meet the Experts round-table discussions, five demoground booths and seven Special Interest Group meetings as guest speakers. We hope to see you at our sessions.  Please join us to hear the latest news and connect with senior ATG development staff. Here's a downloadable listing of all Applications Technology Group-related sessions with times and locations: FOCUS ON Oracle E-Business Suite - Applications Tools and Technology (PDF) General Sessions GEN8474 - Oracle E-Business Suite - Strategy, Update, and RoadmapCliff Godwin, SVP, Oracle Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone West 2002/2004 In this session, hear Oracle E-Business Suite General Manager Cliff Godwin deliver an update on the Oracle E-Business Suite product line. This session covers the value delivered by the current release of Oracle E-Business Suite, the momentum, and how Oracle E-Business Suite applications integrate into Oracle’s overall applications strategy. You’ll come away with an understanding of the value Oracle E-Business Suite applications deliver now and will deliver in the future. GEN9173 - Optimize and Extend Oracle Applications - The Path to Oracle Fusion ApplicationsNadia Bendjedou, Oracle; Corre Curtice, Bhavish Madurai (CSC) Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 3002/3004 One of the main objectives of this session is to help organizations build their IT roadmap for the next five years and be aligned with the Oracle Applications strategy in general and the Oracle Fusion Applications strategy in particular. Come hear about some of the common sense, practical steps you can take to optimize the performance of your Oracle Applications today and prepare your path to Oracle Fusion Applications for when your organization is ready to embrace them. Each step you take in adopting Oracle Fusion technology gets you partway to Oracle Fusion Applications. Conference Sessions CON9024 - Oracle E-Business Suite Technology: Latest Features and Roadmap Lisa Parekh, Oracle Monday, Oct 1, 10:45 AM - 11:45 AM - Moscone West 2016 This Oracle development session provides a comprehensive overview of Oracle’s product strategy for Oracle E-Business Suite technology, the capabilities and associated business benefits of recent releases, and a review of capabilities on the product roadmap. This is the cornerstone session for the Oracle E-Business Suite technology stack. Come hear about the latest new usability enhancements of the user interface; systems administration and configuration management tools; security-related updates; and tools and options for extending, customizing, and integrating Oracle E-Business Suite with other applications. CON9021 - Oracle E-Business Suite Future Directions: Deployment and System AdministrationMax Arderius, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2016  What’s coming in the next major version of Oracle E-Business Suite 12? This Oracle Development session covers the latest technology stack, including the use of Oracle WebLogic Server (Oracle Fusion Middleware 11g) and Oracle Database 11g Release 2 (11.2). Topics include an architectural overview of the latest updates, installation and upgrade options, new configuration options, and new tools for hot cloning and automated “lights-out” cloning. Come learn how online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature) will reduce your database patching downtimes to however long it takes to bounce your database server. CON9017 - Desktop Integration in Oracle E-Business Suite 12.1 Padmaprabodh Ambale, Gustavo Jimenez, Oracle Monday, Oct 1, 4:45 PM - 5:45 PM - Moscone West 2016 This presentation covers the latest functional enhancements in Oracle Web Applications Desktop Integrator and Oracle Report Manager, enhanced Microsoft Office support, and greater support for building custom desktop integration solutions. The session also presents tips and tricks for upgrading from Oracle Applications Desktop Integrator to Oracle Web Applications Desktop Integrator and Oracle Report Manager. CON9023 - Oracle E-Business Suite Technology Certification Primer and Roadmap Steven Chan, Oracle Tuesday, Oct 2, 10:15 AM - 11:15 AM - Moscone West 2016  Is your Oracle E-Business Suite technology stack up to date? Are you taking advantage of all the latest options and capabilities? This Oracle development session summarizes the latest certifications and roadmap for the Oracle E-Business Suite technology stack, including elements such as database releases and options, Java, Oracle Forms, Oracle Containers for J2EE, desktop operating systems, browsers, JRE releases, development and Web authoring tools, user authentication and management, business intelligence, Oracle Application Management Packs, security options, clouds, Oracle VM, and virtualization. The session also covers the most commonly asked questions about tech stack component support dates and upgrade implications. CON9028 - Minimizing Oracle E-Business Suite Maintenance DowntimesSantiago Bastidas, Elke Phelps, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2016 This Oracle development session features a survey of the best techniques sysadmins can use to minimize patching downtimes. It starts with an architectural-level review of Oracle E-Business Suite fundamentals and then moves to a practical view of the various tools and approaches for downtimes. Topics include patching shortcuts, merging patches, distributing worker processes across multiple servers, running ADPatch in noninteractive mode, staged APPL_TOPs, shared file systems, deferring systemwide database tasks, avoiding resource bottlenecks, and more. An added bonus: hear about the upcoming Oracle E-Business Suite 12 online patching capabilities based on the groundbreaking Oracle Database 11g Release 2 Edition-Based Redefinition feature. CON9116 - Extending the Use of Oracle E-Business Suite with the Oracle Endeca PlatformOsama Elkady, Muhannad Obeidat, Oracle Tuesday, Oct 2, 11:45 AM - 12:45 PM - Moscone West 2018 The Oracle Endeca platform includes a leading unstructured data correlation and analytics engine, together with a best-in class catalog search and guided navigation solution, to improve the productivity of all types of users in your enterprise. This development session focuses on the details behind the Oracle Endeca platform’s integration into Oracle E-Business Suite. It demonstrates how easily you can extend the use of the Oracle Endeca platform into other areas of Oracle E-Business Suite and how you can bring in your own data and build new Oracle Endeca applications for Oracle E-Business Suite. CON9005 - Oracle E-Business Suite Integration Best PracticesVeshaal Singh, Oracle, Jeffrey Hand, Zebra Technologies Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2018 Oracle is investing across applications and technologies to make the application integration experience easier for customers. Today Oracle has certified Oracle E-Business Suite on Oracle Fusion Middleware 11g and provides a comprehensive set of integration technologies. Learn about Oracle’s integration offering across data- and process-centric integrations. These technologies can be used to address various application integration challenges and styles. In this session, you will get an understanding of how, when, and where you can leverage Oracle’s integration technologies to connect end-to-end business processes across your enterprise, including your Oracle Applications portfolio.  CON9026 - Latest Oracle E-Business Suite 12.1 User Interface and Usability EnhancementsPadmaprabodh Ambale, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2016 This Oracle development session details the latest UI enhancements to Oracle Application Framework in Oracle E-Business Suite 12.1. Developers will get a detailed look at new features to enhance usability, offer more capabilities for personalization and extensions, and support the development and use of dashboards and Web services. Topics include new rich UI capabilities such as new home page features, Navigator and Favorites pull-down menus, REST interface, embedded widgets for analytics content, Oracle Application Development Framework (Oracle ADF) task flows, third-party widgets, a look-ahead list of values, inline attachments, pop-ups, personalization and extensibility enhancements, business layer extensions, Oracle ADF integration, and mobile devices. CON8805 - Planning Your Oracle E-Business Suite Upgrade from 11i to Release 12.1 and BeyondAnne Carlson, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 3002/3004 Attend this session to hear the latest Oracle E-Business Suite 12.1 upgrade planning tips from Oracle’s support, consulting, development, and IT organizations. You’ll get specific cross-product advice on how to understand the factors that affect your project’s duration, decide on your project’s scope, develop a robust testing strategy, leverage Oracle Support resources, and more. In a nutshell, this session tells you things you need to know before embarking upon your Release 12.1 upgrade project. CON9053 - Advanced Management of Oracle E-Business Suite with Oracle Enterprise ManagerAngelo Rosado, Oracle Tuesday, Oct 2, 5:00 PM - 6:00 PM - Moscone West 2016 The task of managing and monitoring Oracle E-Business Suite environments can be very challenging. Oracle Enterprise Manager is the only product on the market that is designed to monitor and manage all the different technologies that constitute Oracle E-Business Suite applications, including end user, midtier, configuration, host, and database management—to name just a few. Customers that have implemented Oracle Enterprise Manager have experienced dramatic improvements in system visibility and diagnostic capability as well as administrator productivity. The purpose of this session is to highlight the key features and benefits of Oracle Enterprise Manager and Oracle Application Management Suite for Oracle E-Business Suite. CON8809 - Oracle E-Business Suite 12.1 Upgrade Best Practices: Technical InsightIsam Alyousfi, Udayan Parvate, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3011 This session is ideal for organizations thinking about upgrading to Oracle E-Business Suite 12.1. It covers the fundamentals of upgrading to Release 12.1, including the technology stack components and supported upgrade paths. Hear from Oracle Development about the set of best practices for patching in general and executing the Release 12.1 technical upgrade, with special considerations for minimizing your downtime. Also get to know about relatively recent upgrade resources. CON9032 - Upgrading Your Customizations of Oracle E-Business Suite 12.1Sara Woodhull, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2016 Have you personalized Oracle Forms or Oracle Application Framework screens in Oracle E-Business Suite? Have you used mod_plsql in Release 11i? Have you extended or customized your Release 11i environment with other tools? The technical options for upgrading these customizations as part of your Oracle E-Business Suite Release 12.1 upgrade can be bewildering. Come to this Oracle development session to learn about selecting the best upgrade approach for your existing customizations. The session will help you understand customization scenarios and use cases, tools, and technologies to ensure that your Oracle E-Business Suite Release 12.1 environment fits your users’ needs closely and that any future customizations will be easy to upgrade. CON9259 - Oracle E-Business Suite Internationalization and Multilingual FeaturesMaher Al-Nubani, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 2018 Oracle E-Business Suite supports more countries, languages, and regions than ever. Come to this Oracle development session to get an overview of internationalization features and capabilities and see new Release 12 features such as calendar support for Hijra and Thai, new group separators, lightweight multilingual support (MLS) setup, new character sets such as AL32UTF, newly supported languages, Mac certifications, Oracle iSetup support for moving MLS setups, new file export options for Unicode, new MLS number spelling options, and more. CON7188 - Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA SuiteSrikant Subramaniam, Joe Huang, Veshaal Singh, Oracle Wednesday, Oct 3, 10:15 AM - 11:15 AM - Moscone West 3001 Follow your mobile customers, employees, and partners with Oracle Fusion Middleware. See how native iPhone and iPad applications can easily be built for Oracle E-Business Suite with the new Oracle ADF Mobile and Oracle SOA Suite. Using Oracle ADF Mobile, developers can quickly develop native applications for Apple iOS and other mobile platforms. The Oracle SOA Suite/Oracle ADF Mobile combination can execute business transactions on Oracle E-Business Suite. This session includes a demo in which a mobile user approves a business transaction in Oracle E-Business Suite and a demo of the tools used to build a native on-device solution. These concepts for mobile applications also apply to other Oracle applications.CON9029 - Oracle E-Business Suite Directions: Slashing Downtimes with Online PatchingKevin Hudson, Oracle Wednesday, Oct 3, 11:45 AM - 12:45 PM - Moscone West 2016 Oracle E-Business Suite will soon include online patching (based on the Oracle Database 11g Release 2 Edition-Based Redefinition feature), which will reduce your database patching downtimes to however long it takes to bounce your database server. This Oracle development session details how online patching works, with special attention to what’s happening at a database object level when database patches are applied to an Oracle E-Business Suite environment that’s still running. Come learn about the operational and system management implications for minimizing maintenance downtimes when applying database patches with this new technology and the related impact on customizations you might have built on top of Oracle E-Business Suite. CON8806 - Upgrading to Oracle E-Business Suite 12.1: Technical and Functional PanelAndrew Katz, Komori America Corporation; Sandra Vucinic, VLAD Group, Inc. ;Srini Chavali, Cummins Inc.; Amrita Mehrok, Nadia Bendjedou, Anne Carlson Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2018 In this panel discussion, Oracle experts, customers, and partners share their experiences in upgrading to the latest release of Oracle E-Business Suite, Release 12.1. The panelists cover aspects of a typical Release 12 upgrade, technical (upgrading the technical infrastructure) as well as functional (upgrading to the new financial infrastructure). Hear directly from the experts who either develop the product or support, implement, or upgrade it, and find out how to apply their lessons learned to your organization. CON9027 - Personalize and Extend Oracle E-Business Suite Applications with Rich MashupsGustavo Jimenez, Padmaprabodh Ambale, Oracle Wednesday, Oct 3, 1:15 PM - 2:15 PM - Moscone West 2016 This session covers the use of several Oracle Fusion Middleware technologies to personalize and extend your existing Oracle E-Business Suite applications. The Oracle Fusion Middleware technologies covered include Oracle Application Development Framework (Oracle ADF), Oracle WebCenter, Oracle Endeca applications, and Oracle Business Intelligence Enterprise Edition with Oracle E-Business Suite Oracle Application Framework applications. CON9036 - Advanced Oracle E-Business Suite Architectures: Maximum Availability, Security, and MoreElke Phelps, Oracle Wednesday, Oct 3, 3:30 PM - 4:30 PM - Moscone West 2016 This session includes architecture diagrams and configuration instructions for building a maximum availability architecture (MAA) that will help you design a disaster recovery solution that fits the needs of your business. Database and application high-availability features it describes include Oracle Data Guard, Oracle Real Application Clusters (Oracle RAC), Oracle Active Data Guard, load-balancing Web and forms services, parallel concurrent processing, and the use of Oracle Exalogic and Oracle Exadata to provide a highly available environment. The session also covers the latest updates to systems management tools, AutoConfig, cloud computing, virtualization, and Oracle WebLogic Server and provides sneak previews of upcoming functionality. CON9047 - Efficiently Scaling Oracle E-Business Suite on Oracle Exadata and Oracle ExalogicIsam Alyousfi, Nishit Rao, Oracle Wednesday, Oct 3, 5:00 PM - 6:00 PM - Moscone West 2016 Oracle Exadata and Oracle Exalogic are designed from the ground up with optimizations in software and hardware to deliver superfast performance for mission-critical applications such as Oracle E-Business Suite. Oracle E-Business Suite applications run three to eight times as fast on the Oracle Exadata/Oracle Exalogic platform in standard benchmark tests. Besides performance, customers benefit from simplified support, enhanced manageability, and the ability to consolidate multiple Oracle E-Business Suite instances. Attend this session to understand best practices for Oracle E-Business Suite deployment on Oracle Exalogic and Oracle Exadata through customer case studies. Learn how adopting the Exa* platform increases efficiency, simplifies scaling, and boosts performance for peak loads. CON8716 - Web Services and SOA Integration Options for Oracle E-Business SuiteRekha Ayothi, Veshaal Singh, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2016 This Oracle development session provides a deep dive into a subset of the Web services and SOA-related integration options available to Oracle E-Business Suite systems integrators. It offers a technical look at Oracle E-Business Suite Integrated SOA Gateway, Oracle SOA Suite, Oracle Application Adapters for Data Integration for Oracle E-Business Suite, and other Web services options for integrating Oracle E-Business Suite with other applications. Systems integrators and developers will get an overview of the latest integration capabilities and technologies available out of the box with Oracle E-Business Suite and possibly a sneak preview of upcoming functionality and features. CON9030 - Recommendations for Oracle E-Business Suite Performance TuningIsam Alyousfi, Samer Barakat, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2018 Need to squeeze more performance out of your existing servers? This packed Oracle development session summarizes practical tips and lessons learned from performance-tuning and benchmarking the world’s largest Oracle E-Business Suite environments. Apps sysadmins will learn concrete tips and techniques for identifying and resolving performance bottlenecks on all layers, with special attention to application- and database-tier servers. Learn about tuning Oracle Forms, Oracle Concurrent Manager, Apache, and Oracle Discoverer. Track down memory leaks and other issues at the Java and JVM layers. The session also covers Oracle E-Business Suite product-level tuning, including Oracle Workflow, Oracle Order Management, Oracle Payroll, and other modules. CON3429 - Using Oracle ADF with Oracle E-Business Suite: The Full Integration ViewSiva Puthurkattil, Lake County; Juan Camilo Ruiz, Sara Woodhull, Oracle Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 3003 Oracle E-Business Suite delivers functionality for handling the core business of your organization. However, user requirements and new technologies are driving an emerging need to implement new types of user interfaces for these applications. This session provides an overview of how to use Oracle Application Development Framework (Oracle ADF) to deliver cutting-edge Web 2.0 and mobile rich user interfaces that front existing Oracle E-Business Suite processes, and it also explores all the existing types of integration between the two worlds. CON9020 - Integrating Oracle E-Business Suite with Oracle Identity Management SolutionsSunil Ghosh, Elke Phelps, Oracle Thursday, Oct 4, 12:45 PM - 1:45 PM - Moscone West 2016 Need to integrate Oracle E-Business Suite with Microsoft Windows Kerberos, Active Directory, CA Netegrity SiteMinder, or other third-party authentication systems? Want to understand your options when Oracle Premier Support for Oracle Single Sign-On ends in December 2011? This Oracle Development session covers the latest certified integrations with Oracle Access Manager 11g and Oracle Internet Directory 11g, which can be used individually or as bridges for integrating with third-party authentication solutions. The session presents an architectural overview of how Oracle Access Manager, its WebGate and AccessGate components, and Oracle Internet Directory work together, with implications for Oracle Discoverer, Oracle Portal, and other Oracle Fusion identity management products. CON9019 - Troubleshooting, Diagnosing, and Optimizing Oracle E-Business Suite TechnologyGustavo Jimenez, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2016 This session covers how you can proactively diagnose Oracle E-Business Suite applications, including extensions built with Oracle Fusion Middleware technologies such as Oracle Application Development Framework (Oracle ADF) and Oracle WebCenter to catch potential issues in the middle tier before they become more serious. Topics include debugging, logging infrastructure, warning signs, performance tuning, information required when logging service requests, general JVM optimization, and an overall picture of all the moving parts that make it possible for Oracle E-Business Suite to isolate and fix problems. Also learn how Oracle Diagnostics Framework will help prevent downtime caused by failures. CON9031 - The Top 10 Things You Can Do to Secure Your Oracle E-Business Suite InstanceEric Bing, Erik Graversen, Oracle Thursday, Oct 4, 2:15 PM - 3:15 PM - Moscone West 2018 Learn the top 10 things you can do to secure your applications and your sensitive data. This Oracle development session for system administrators and security professionals explores some of the most important and overlooked things you can do to secure your Oracle E-Business Suite instance. It also covers data masking and other mechanisms for protecting sensitive data. Special Interest Groups (SIG) Some of our most senior staff have been invited to participate on the following SIG meetings as guest speakers: SIG10525 - OAUG - Archive & Purge SIGBrian Bent - Pre-Sales Engineer, TierData, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3011 The Archive and Purge SIG is an organization in which users can share their experiences and solicit functional and technical advice on archiving and purging data in Oracle E-Business Suite. This session provides an opportunity for users to network and share best practices, tips, and tricks. Guest: Oracle E-Business Suite Database Performance, Archive & Purging - Q&A SessionIsam Alyousfi, Senior Director, Applications Performance, Oracle SIG10547 - OAUG - Oracle E-Business (EBS) Applications Technology SIGSrini Chavali - IT Director, Cummins Inc Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3018 The general purpose of the EBS Applications Technology SIG is to inform and educate its members about current and future components of the tech stack as they relate to Oracle E-Business Suite. Attend this meeting for networking and education and to share best practices. Guest: Oracle E-Business Suite Technology Certification Roadmap - Presentation and Q&ASteven Chan, Sr. Director, Applications Technology Group, Oracle SIG10559 - OAUG - User Management SIGSusan Behn - VP of Oracle Delivery, Infosemantics, Inc. Sunday, Sep 30, 10:30 AM - 12:00 PM - Moscone West 3024 The E-Business Suite User Management SIG focuses on the components of user management that enable Oracle E-Business Suite users to define administrative functions and manage users’ access to functions and data based on roles within an organization—rather than the user’s individual identity—which is referred to as role-based access control (RBAC). This meeting includes an introduction to Oracle User Management that covers the Oracle User Management building blocks and presents an example of creating a security policy.Guest: Security and User Management - Q&A SessionEric Bing, Sr. Director, EBS Security, OracleSara Woodhull, Principal Product Manager, Applications Technology Group, Oracle SIG10515 - OAUG – Upgrade SIGBarbara Matthews - Consultant, On Call DBASandra Vucinic, VLAD Group, Inc. Sunday, Sep 30, 12:00 PM - 2:00 PM - Moscone West 3009 This Upgrade SIG session starts with a business meeting and then features a Q&A panel discussion on Oracle E-Business Suite upgrade topics. The session• Reviews Upgrade SIG goals and objectives• Provides answers, during the Q&A session, to questions related to Oracle E-Business Suite upgrades• Shares “real world” experiences, tips, and techniques for Oracle E-Business Suite upgrades to Release 12.1. Guest: Oracle E-Business Suite Upgrade - Q&A SessionAnne Carlson - Sr. Director, Oracle E-Business Suite Product Strategy, OracleUdayan Parvate - Director, EBS Release Engineering, OracleSuzana Ferrari, Sr. Principal Consultant, OracleIsam Alyousfi, Sr. Director, Applications Performance, Oracle SIG10552 - OAUG - Oracle E-Business Suite SIGDonna Rosentrater - Manager, Global Sourcing & Procurement Systems, TJX Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3020 The E-Business Suite SIG, affiliated with OAUG, supports Oracle E-Business Suite users through networking, education, and sharing of best practices. This SIG meeting will feature a general discussion of Oracle E-Business Suite product strategies in Release 12 and migration to Oracle Fusion Applications. Guest: Oracle E-Business Suite - Q&A SessionJeanne Lowell, Vice President, EBS Product Strategy, OracleNadia Bendjedou, Sr. Director, Product Strategy, Oracle SIG10556 - OAUG - SysAdmin SIGRandy Giefer - Sr Systems and Security Architect, Solution Beacon, LLC Sunday, Sep 30, 12:15 PM - 1:45 PM - Moscone West 3022 The SysAdmin SIG provides a forum in which OAUG members and participants can share updates, tips, and successful practices relating to system administration in an Oracle applications environment. The SysAdmin SIG strives to enable system administrators to become more effective and efficient in their jobs by providing them with access to people and information that can increase their system administration knowledge and experience. Attend this meeting to network, share best practices, and benefit from educational content. Guest: Oracle E-Business Suite 12.2 Online Patching- Presentation and Q&AKevin Hudson, Sr. Director, Applications Technology Group, Oracle SIG10553 - OAUG - Database SIGMichael Brown - Senior DBA, COLIBRI LTD LC Sunday, Sep 30, 2:00 PM - 3:15 PM - Moscone West 3020 The OAUG Database SIG provides an opportunity for applications database administrators to learn from and share their experiences with supporting the various Oracle applications environments. This session will include a brief business meeting followed by a short presentation. It will end with an open discussion among the attendees about items of interest to those present. Guest: Oracle E-Business Suite Database Performance - Presentation and Q&AIsam Alyousfi, Sr. Director, Applications Performance, Oracle Meet the Experts We're planning two round-table discussions where you can review your questions with senior E-Business Suite ATG staff: MTE9648 - Meet the Experts for Oracle E-Business Suite: Planning Your Upgrade Jeanne Lowell - VP, EBS Product Strategy, Oracle John Abraham - Sr. Principal Product Manager, Oracle Nadia Bendjedou - Sr. Director - Product Strategy, Oracle Anne Carlson - Sr. Director, Applications Technology Group, Oracle Udayan Parvate - Director, EBS Release Engineering, Oracle Isam Alyousfi, Sr. Director, Applications Performance, Oracle Monday, Oct 1, 3:15 PM - 4:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite upgrade best practices. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. MTE9649 - Meet the Oracle E-Business Suite Tools and Technology Experts Lisa Parekh - Vice President, Technology Integration, Oracle Steven Chan - Sr. Director, Oracle Elke Phelps - Sr. Principal Product Manager, Applications Technology Group, Oracle Max Arderius - Manager, Applications Technology Group, Oracle Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2001A Don’t miss this Oracle Applications Meet the Experts session with experts who specialize in Oracle E-Business Suite technology. This is the place where attendees can have informal and semistructured but open one-on-one discussions with Strategy and Development regarding Oracle Applications strategy and your specific business and IT strategy. The experts will be available to discuss the value of the latest releases and share insights into the best path for your enterprise, so come ready with your questions. Space is limited, so make sure you register. Demos We have five booths in the exhibition demogrounds this year, where you can try ATG technologies firsthand and get your questions answered. Please stop by and meet our staff at the following locations: Advanced Architecture and Technology Stack for Oracle E-Business Suite (W-067) New User Productivity Capabilities in Oracle E-Business Suite (W-065) End-to-End Management of Oracle E-Business Suite (W-063) Oracle E-Business Suite 12.1 Technical Upgrade Best Practices (W-066) SOA-Based Integration for Oracle E-Business Suite (W-064)

  Read the article

• JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue

  - by John-Brown.Evans

  JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue ol{margin:0;padding:0} .c11_4{vertical-align:top;width:129.8pt;border-style:solid;background-color:#f3f3f3;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c9_4{vertical-align:top;width:207pt;border-style:solid;background-color:#f3f3f3;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt}.c14{vertical-align:top;width:207pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c17_4{vertical-align:top;width:129.8pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c7_4{vertical-align:top;width:130pt;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c19_4{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c22_4{background-color:#ffffff} .c20_4{list-style-type:disc;margin:0;padding:0} .c6_4{font-size:8pt;font-family:"Courier New"} .c24_4{color:inherit;text-decoration:inherit} .c23_4{color:#1155cc;text-decoration:underline} .c0_4{height:11pt;direction:ltr} .c10_4{font-size:10pt;font-family:"Courier New"} .c3_4{padding-left:0pt;margin-left:36pt} .c18_4{font-size:8pt} .c8_4{text-align:center} .c12_4{background-color:#ffff00} .c2_4{font-weight:bold} .c21_4{background-color:#00ff00} .c4_4{line-height:1.0} .c1_4{direction:ltr} .c15_4{background-color:#f3f3f3} .c13_4{font-family:"Courier New"} .c5_4{font-style:italic} .c16_4{border-collapse:collapse} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:bold;padding-bottom:0pt} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-style:italic;font-size:11pt;font-family:"Arial";padding-bottom:0pt} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal;padding-bottom:0pt} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-style:italic;font-size:10pt;font-family:"Arial";padding-bottom:0pt} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue In this example we will create a BPEL process which will write (enqueue) a message to a JMS queue using a JMS adapter. The JMS adapter will enqueue the full XML payload to the queue. This sample will use the following WebLogic Server objects. The first two, the Connection Factory and JMS Queue, were created as part of the first blog post in this series, JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g. If you haven't created those objects yet, please see that post for details on how to do so. The Connection Pool will be created as part of this example. Object Name Type JNDI Name TestConnectionFactory Connection Factory jms/TestConnectionFactory TestJMSQueue JMS Queue jms/TestJMSQueue eis/wls/TestQueue Connection Pool eis/wls/TestQueue 1. Verify Connection Factory and JMS Queue As mentioned above, this example uses a WLS Connection Factory called TestConnectionFactory and a JMS queue TestJMSQueue. As these are prerequisites for this example, let us verify they exist. Log in to the WebLogic Server Administration Console. Select Services > JMS Modules > TestJMSModule You should see the following objects: If not, or if the TestJMSModule is missing, please see the abovementioned article and create these objects before continuing. 2. Create a JMS Adapter Connection Pool in WebLogic Server The BPEL process we are about to create uses a JMS adapter to write to the JMS queue. The JMS adapter is deployed to the WebLogic server and needs to be configured to include a connection pool which references the connection factory associated with the JMS queue. In the WebLogic Server Console Go to Deployments > Next and select (click on) the JmsAdapter Select Configuration > Outbound Connection Pools and expand oracle.tip.adapter.jms.IJmsConnectionFactory. This will display the list of connections configured for this adapter. For example, eis/aqjms/Queue, eis/aqjms/Topic etc. These JNDI names are actually quite confusing. We are expecting to configure a connection pool here, but the names refer to queues and topics. One would expect these to be called *ConnectionPool or *_CF or similar, but to conform to this nomenclature, we will call our entry eis/wls/TestQueue . This JNDI name is also the name we will use later, when creating a BPEL process to access this JMS queue! Select New, check the oracle.tip.adapter.jms.IJmsConnectionFactory check box and Next. Enter JNDI Name: eis/wls/TestQueue for the connection instance, then press Finish. Expand oracle.tip.adapter.jms.IJmsConnectionFactory again and select (click on) eis/wls/TestQueue The ConnectionFactoryLocation must point to the JNDI name of the connection factory associated with the JMS queue you will be writing to. In our example, this is the connection factory called TestConnectionFactory, with the JNDI name jms/TestConnectionFactory.( As a reminder, this connection factory is contained in the JMS Module called TestJMSModule, under Services > Messaging > JMS Modules > TestJMSModule which we verified at the beginning of this document. )Enter jms/TestConnectionFactory  into the Property Value field for Connection Factory Location. After entering it, you must press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console. Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes as can be seen in the following screen shot: The next step is to redeploy the JmsAdapter.Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the JMS queue. To summarize: we have created a JMS adapter connection pool connector with the JNDI name jms/TestConnectionFactory. This is the JNDI name to be accessed by a process such as a BPEL process, when using the JMS adapter to access the previously created JMS queue with the JNDI name jms/TestJMSQueue. In the following step, we will set up a BPEL process to use this JMS adapter to write to the JMS queue. 3. Create a BPEL Composite with a JMS Adapter Partner Link This step requires that you have a valid Application Server Connection defined in JDeveloper, pointing to the application server on which you created the JMS Queue and Connection Factory. You can create this connection in JDeveloper under the Application Server Navigator. Give it any name and be sure to test the connection before completing it. This sample will use the connection name jbevans-lx-PS5, as that is the name of the connection pointing to my SOA PS5 installation. When using a JMS adapter from within a BPEL process, there are various configuration options, such as the operation type (consume message, produce message etc.), delivery mode and message type. One of these options is the choice of the format of the JMS message payload. This can be structured around an existing XSD, in which case the full XML element and tags are passed, or it can be opaque, meaning that the payload is sent as-is to the JMS adapter. In the case of an XSD-based message, the payload can simply be copied to the input variable of the JMS adapter. In the case of an opaque message, the JMS adapter’s input variable is of type base64binary. So the payload needs to be converted to base64 binary first. I will go into this in more detail in a later blog entry. This sample will pass a simple message to the adapter, based on the following simple XSD file, which consists of a single string element: stringPayload.xsd <?xml version="1.0" encoding="windows-1252" ?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.example.org" targetNamespace="http://www.example.org" elementFormDefault="qualified" <xsd:element name="exampleElement" type="xsd:string"> </xsd:element> </xsd:schema> The following steps are all executed in JDeveloper. The SOA project will be created inside a JDeveloper Application. If you do not already have an application to contain the project, you can create a new one via File > New > General > Generic Application. Give the application any name, for example JMSTests and, when prompted for a project name and type, call the project JmsAdapterWriteWithXsd and select SOA as the project technology type. If you already have an application, continue below. Create a SOA Project Create a new project and choose SOA Tier > SOA Project as its type. Name it JmsAdapterWriteSchema. When prompted for the composite type, choose Composite With BPEL Process. When prompted for the BPEL Process, name it JmsAdapterWriteSchema too and choose Synchronous BPEL Process as the template. This will create a composite with a BPEL process and an exposed SOAP service. Double-click the BPEL process to open and begin editing it. You should see a simple BPEL process with a Receive and Reply activity. As we created a default process without an XML schema, the input and output variables are simple strings. Create an XSD File An XSD file is required later to define the message format to be passed to the JMS adapter. In this step, we create a simple XSD file, containing a string variable and add it to the project. First select the xsd item in the left-hand navigation tree to ensure that the XSD file is created under that item. Select File > New > General > XML and choose XML Schema. Call it stringPayload.xsd and when the editor opens, select the Source view. then replace the contents with the contents of the stringPayload.xsd example above and save the file. You should see it under the xsd item in the navigation tree. Create a JMS Adapter Partner Link We will create the JMS adapter as a service at the composite level. If it is not already open, double-click the composite.xml file in the navigator to open it. From the Component Palette, drag a JMS adapter over onto the right-hand swim lane, under External References. This will start the JMS Adapter Configuration Wizard. Use the following entries: Service Name: JmsAdapterWrite Oracle Enterprise Messaging Service (OEMS): Oracle Weblogic JMS AppServer Connection: Use an existing application server connection pointing to the WebLogic server on which the above JMS queue and connection factory were created. You can use the “+” button to create a connection directly from the wizard, if you do not already have one. This example uses a connection called jbevans-lx-PS5. Adapter Interface > Interface: Define from operation and schema (specified later) Operation Type: Produce Message Operation Name: Produce_message Destination Name: Press the Browse button, select Destination Type: Queues, then press Search. Wait for the list to populate, then select the entry for TestJMSQueue , which is the queue created earlier. JNDI Name: The JNDI name to use for the JMS connection. This is probably the most important step in this exercise and the most common source of error. This is the JNDI name of the JMS adapter’s connection pool created in the WebLogic Server and which points to the connection factory. JDeveloper does not verify the value entered here. If you enter a wrong value, the JMS adapter won’t find the queue and you will get an error message at runtime, which is very difficult to trace. In our example, this is the value eis/wls/TestQueue . (See the earlier step on how to create a JMS Adapter Connection Pool in WebLogic Server for details.) MessagesURL: We will use the XSD file we created earlier, stringPayload.xsd to define the message format for the JMS adapter. Press the magnifying glass icon to search for schema files. Expand Project Schema Files > stringPayload.xsd and select exampleElement: string. Press Next and Finish, which will complete the JMS Adapter configuration. Wire the BPEL Component to the JMS Adapter In this step, we link the BPEL process/component to the JMS adapter. From the composite.xml editor, drag the right-arrow icon from the BPEL process to the JMS adapter’s in-arrow. This completes the steps at the composite level. 4. Complete the BPEL Process Design Invoke the JMS Adapter Open the BPEL component by double-clicking it in the design view of the composite.xml, or open it from the project navigator by selecting the JmsAdapterWriteSchema.bpel file. This will display the BPEL process in the design view. You should see the JmsAdapterWrite partner link under one of the two swim lanes. We want it in the right-hand swim lane. If JDeveloper displays it in the left-hand lane, right-click it and choose Display > Move To Opposite Swim Lane. An Invoke activity is required in order to invoke the JMS adapter. Drag an Invoke activity between the Receive and Reply activities. Drag the right-hand arrow from the Invoke activity to the JMS adapter partner link. This will open the Invoke editor. The correct default values are entered automatically and are fine for our purposes. We only need to define the input variable to use for the JMS adapter. By pressing the green “+” symbol, a variable of the correct type can be auto-generated, for example with the name Invoke1_Produce_Message_InputVariable. Press OK after creating the variable. ( For some reason, while I was testing this, the JMS Adapter moved back to the left-hand swim lane again after this step. There is no harm in leaving it there, but I find it easier to follow if it is in the right-hand lane, because I kind-of think of the message coming in on the left and being routed through the right. But you can follow your personal preference here.) Assign Variables Drag an Assign activity between the Receive and Invoke activities. We will simply copy the input variable to the JMS adapter and, for completion, so the process has an output to print, again to the process’s output variable. Double-click the Assign activity and create two Copy rules: for the first, drag Variables > inputVariable > payload > client:process > client:input_string to Invoke1_Produce_Message_InputVariable > body > ns2:exampleElement for the second, drag the same input variable to outputVariable > payload > client:processResponse > client:result This will create two copy rules, similar to the following: Press OK. This completes the BPEL and Composite design. 5. Compile and Deploy the Composite We won’t go into too much detail on how to compile and deploy. In JDeveloper, compile the process by pressing the Make or Rebuild icons or by right-clicking the project name in the navigator and selecting Make... or Rebuild... If the compilation is successful, deploy it to the SOA server connection defined earlier. (Right-click the project name in the navigator, select Deploy to Application Server, choose the application server connection, choose the partition on the server (usually default) and press Finish. You should see the message ---- Deployment finished. ---- in the Deployment frame, if the deployment was successful. 6. Test the Composite This is the exciting part. Open two tabs in your browser and log in to the WebLogic Administration Console in one tab and the Enterprise Manager 11g Fusion Middleware Control (EM) for your SOA installation in the other. We will use the Console to monitor the messages being written to the queue and the EM to execute the composite. In the Console, go to Services > Messaging > JMS Modules > TestJMSModule > TestJMSQueue > Monitoring. Note the number of messages under Messages Current. In the EM, go to SOA > soa-infra (soa_server1) > default (or wherever you deployed your composite to) and click on JmsAdapterWriteSchema [1.0], then press the Test button. Under Input Arguments, enter any string into the text input field for the payload, for example Test Message then press Test Web Service. If the instance is successful you should see the same text in the Response message, “Test Message”. In the Console, refresh the Monitoring screen to confirm a new message has been written to the queue. Check the checkbox and press Show Messages. Click on the newest message and view its contents. They should include the full XML of the entered payload. 7. Troubleshooting If you get an exception similar to the following at runtime ... BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element The JCA Binding Component is unable to startup the Resource Adapter specified in the element: location='eis/wls/QueueTest'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '' element in weblogic-ra.xml has not been set to eis/wls/QueueTest. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server at oracle.integration.platform.blocks.adapter.fw.AdapterBindingException. createJndiLookupException(AdapterBindingException.java:130) at oracle.integration.platform.blocks.adapter.fw.jca.cci. JCAConnectionManager$JCAConnectionPool.createJCAConnectionFactory (JCAConnectionManager.java:1387) at oracle.integration.platform.blocks.adapter.fw.jca.cci. JCAConnectionManager$JCAConnectionPool.newPoolObject (JCAConnectionManager.java:1285) ... then this is very likely due to an incorrect JNDI name entered for the JMS Connection in the JMS Adapter Wizard. Recheck those steps. The error message prints the name of the JNDI name used. In this example, it was incorrectly entered as eis/wls/QueueTest instead of eis/wls/TestQueue. This concludes this example. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

  Read the article

• Quick guide to Oracle IRM 11g: Classification design

  - by Simon Thorpe

  Quick guide to Oracle IRM 11g indexThis is the final article in the quick guide to Oracle IRM. If you've followed everything prior you will now have a fully functional and tested Information Rights Management service. It doesn't matter if you've been following the 10g or 11g guide as this next article is common to both. ContentsWhy this is the most important part... Understanding the classification and standard rights model Identifying business use cases Creating an effective IRM classification modelOne single classification across the entire businessA context for each and every possible granular use caseWhat makes a good context? Deciding on the use of roles in the context Reviewing the features and security for context roles Summary Why this is the most important part...Now the real work begins, installing and getting an IRM system running is as simple as following instructions. However to actually have an IRM technology easily protecting your most sensitive information without interfering with your users existing daily work flows and be able to scale IRM across the entire business, requires thought into how confidential documents are created, used and distributed. This article is going to give you the information you need to ask the business the right questions so that you can deploy your IRM service successfully. The IRM team here at Oracle have over 10 years of experience in helping customers and it is important you understand the following to be successful in securing access to your most confidential information. Whatever you are trying to secure, be it mergers and acquisitions information, engineering intellectual property, health care documentation or financial reports. No matter what type of user is going to access the information, be they employees, contractors or customers, there are common goals you are always trying to achieve.Securing the content at the earliest point possible and do it automatically. Removing the dependency on the user to decide to secure the content reduces the risk of mistakes significantly and therefore results a more secure deployment. K.I.S.S. (Keep It Simple Stupid) Reduce complexity in the rights/classification model. Oracle IRM lets you make changes to access to documents even after they are secured which allows you to start with a simple model and then introduce complexity once you've understood how the technology is going to be used in the business. After an initial learning period you can review your implementation and start to make informed decisions based on user feedback and administration experience. Clearly communicate to the user, when appropriate, any changes to their existing work practice. You must make every effort to make the transition to sealed content as simple as possible. For external users you must help them understand why you are securing the documents and inform them the value of the technology to both your business and them. Before getting into the detail, I must pay homage to Martin White, Vice President of client services in SealedMedia, the company Oracle acquired and who created Oracle IRM. In the SealedMedia years Martin was involved with every single customer and was key to the design of certain aspects of the IRM technology, specifically the context model we will be discussing here. Listening carefully to customers and understanding the flexibility of the IRM technology, Martin taught me all the skills of helping customers build scalable, effective and simple to use IRM deployments. No matter how well the engineering department designed the software, badly designed and poorly executed projects can result in difficult to use and manage, and ultimately insecure solutions. The advice and information that follows was born with Martin and he's still delivering IRM consulting with customers and can be found at www.thinkers.co.uk. It is from Martin and others that Oracle not only has the most advanced, scalable and usable document security solution on the market, but Oracle and their partners have the most experience in delivering successful document security solutions. Understanding the classification and standard rights model The goal of any successful IRM deployment is to balance the increase in security the technology brings without over complicating the way people use secured content and avoid a significant increase in administration and maintenance. With Oracle it is possible to automate the protection of content, deploy the desktop software transparently and use authentication methods such that users can open newly secured content initially unaware the document is any different to an insecure one. That is until of course they attempt to do something for which they don't have any rights, such as copy and paste to an insecure application or try and print. Central to achieving this objective is creating a classification model that is simple to understand and use but also provides the right level of complexity to meet the business needs. In Oracle IRM the term used for each classification is a "context". A context defines the relationship between.A group of related documents The people that use the documents The roles that these people perform The rights that these people need to perform their role The context is the key to the success of Oracle IRM. It provides the separation of the role and rights of a user from the content itself. Documents are sealed to contexts but none of the rights, user or group information is stored within the content itself. Sealing only places information about the location of the IRM server that sealed it, the context applied to the document and a few other pieces of metadata that pertain only to the document. This important separation of rights from content means that millions of documents can be secured against a single classification and a user needs only one right assigned to be able to access all documents. If you have followed all the previous articles in this guide, you will be ready to start defining contexts to which your sensitive information will be protected. But before you even start with IRM, you need to understand how your own business uses and creates sensitive documents and emails. Identifying business use cases Oracle is able to support multiple classification systems, but usually there is one single initial need for the technology which drives a deployment. This need might be to protect sensitive mergers and acquisitions information, engineering intellectual property, financial documents. For this and every subsequent use case you must understand how users create and work with documents, to who they are distributed and how the recipients should interact with them. A successful IRM deployment should start with one well identified use case (we go through some examples towards the end of this article) and then after letting this use case play out in the business, you learn how your users work with content, how well your communication to the business worked and if the classification system you deployed delivered the right balance. It is at this point you can start rolling the technology out further. Creating an effective IRM classification model Once you have selected the initial use case you will address with IRM, you need to design a classification model that defines the access to secured documents within the use case. In Oracle IRM there is an inbuilt classification system called the "context" model. In Oracle IRM 11g it is possible to extend the server to support any rights classification model, but the majority of users who are not using an application integration (such as Oracle IRM within Oracle Beehive) are likely to be starting out with the built in context model. Before looking at creating a classification system with IRM, it is worth reviewing some recognized standards and methods for creating and implementing security policy. A very useful set of documents are the ISO 17799 guidelines and the SANS security policy templates. First task is to create a context against which documents are to be secured. A context consists of a group of related documents (all top secret engineering research), a list of roles (contributors and readers) which define how users can access documents and a list of users (research engineers) who have been given a role allowing them to interact with sealed content. Before even creating the first context it is wise to decide on a philosophy which will dictate the level of granularity, the question is, where do you start? At a department level? By project? By technology? First consider the two ends of the spectrum... One single classification across the entire business Imagine that instead of having separate contexts, one for engineering intellectual property, one for your financial data, one for human resources personally identifiable information, you create one context for all documents across the entire business. Whilst you may have immediate objections, there are some significant benefits in thinking about considering this. Document security classification decisions are simple. You only have one context to chose from! User provisioning is simple, just make sure everyone has a role in the only context in the business. Administration is very low, if you assign rights to groups from the business user repository you probably never have to touch IRM administration again. There are however some obvious downsides to this model.All users in have access to all IRM secured content. So potentially a sales person could access sensitive mergers and acquisition documents, if they can get their hands on a copy that is. You cannot delegate control of different documents to different parts of the business, this may not satisfy your regulatory requirements for the separation and delegation of duties. Changing a users role affects every single document ever secured. Even though it is very unlikely a business would ever use one single context to secure all their sensitive information, thinking about this scenario raises one very important point. Just having one single context and securing all confidential documents to it, whilst incurring some of the problems detailed above, has one huge value. Once secured, IRM protected content can ONLY be accessed by authorized users. Just think of all the sensitive documents in your business today, imagine if you could ensure that only everyone you trust could open them. Even if an employee lost a laptop or someone accidentally sent an email to the wrong recipient, only the right people could open that file. A context for each and every possible granular use case Now let's think about the total opposite of a single context design. What if you created a context for each and every single defined business need and created multiple contexts within this for each level of granularity? Let's take a use case where we need to protect engineering intellectual property. Imagine we have 6 different engineering groups, and in each we have a research department, a design department and manufacturing. The company information security policy defines 3 levels of information sensitivity... restricted, confidential and top secret. Then let's say that each group and department needs to define access to information from both internal and external users. Finally add into the mix that they want to review the rights model for each context every financial quarter. This would result in a huge amount of contexts. For example, lets just look at the resulting contexts for one engineering group. Q1FY2010 Restricted Internal - Engineering Group 1 - Research Q1FY2010 Restricted Internal - Engineering Group 1 - Design Q1FY2010 Restricted Internal - Engineering Group 1 - Manufacturing Q1FY2010 Restricted External- Engineering Group 1 - Research Q1FY2010 Restricted External - Engineering Group 1 - Design Q1FY2010 Restricted External - Engineering Group 1 - Manufacturing Q1FY2010 Confidential Internal - Engineering Group 1 - Research Q1FY2010 Confidential Internal - Engineering Group 1 - Design Q1FY2010 Confidential Internal - Engineering Group 1 - Manufacturing Q1FY2010 Confidential External - Engineering Group 1 - Research Q1FY2010 Confidential External - Engineering Group 1 - Design Q1FY2010 Confidential External - Engineering Group 1 - Manufacturing Q1FY2010 Top Secret Internal - Engineering Group 1 - Research Q1FY2010 Top Secret Internal - Engineering Group 1 - Design Q1FY2010 Top Secret Internal - Engineering Group 1 - Manufacturing Q1FY2010 Top Secret External - Engineering Group 1 - Research Q1FY2010 Top Secret External - Engineering Group 1 - Design Q1FY2010 Top Secret External - Engineering Group 1 - Manufacturing Now multiply the above by 6 for each engineering group, 18 contexts. You are then creating/reviewing another 18 every 3 months. After a year you've got 72 contexts. What would be the advantages of such a complex classification model? You can satisfy very granular rights requirements, for example only an authorized engineering group 1 researcher can create a top secret report for access internally, and his role will be reviewed on a very frequent basis. Your business may have very complex rights requirements and mapping this directly to IRM may be an obvious exercise. The disadvantages of such a classification model are significant...Huge administrative overhead. Someone in the business must manage, review and administrate each of these contexts. If the engineering group had a single administrator, they would have 72 classifications to reside over each year. From an end users perspective life will be very confusing. Imagine if a user has rights in just 6 of these contexts. They may be able to print content from one but not another, be able to edit content in 2 contexts but not the other 4. Such confusion at the end user level causes frustration and resistance to the use of the technology. Increased synchronization complexity. Imagine a user who after 3 years in the company ends up with over 300 rights in many different contexts across the business. This would result in long synchronization times as the client software updates all your offline rights. Hard to understand who can do what with what. Imagine being the VP of engineering and as part of an internal security audit you are asked the question, "What rights to researchers have to our top secret information?". In this complex model the answer is not simple, it would depend on many roles in many contexts. Of course this example is extreme, but it highlights that trying to build many barriers in your business can result in a nightmare of administration and confusion amongst users. In the real world what we need is a balance of the two. We need to seek an optimum number of contexts. Too many contexts are unmanageable and too few contexts does not give fine enough granularity. What makes a good context? Good context design derives mainly from how well you understand your business requirements to secure access to confidential information. Some customers I have worked with can tell me exactly the documents they wish to secure and know exactly who should be opening them. However there are some customers who know only of the government regulation that requires them to control access to certain types of information, they don't actually know where the documents are, how they are created or understand exactly who should have access. Therefore you need to know how to ask the business the right questions that lead to information which help you define a context. First ask these questions about a set of documentsWhat is the topic? Who are legitimate contributors on this topic? Who are the authorized readership? If the answer to any one of these is significantly different, then it probably merits a separate context. Remember that sealed documents are inherently secure and as such they cannot leak to your competitors, therefore it is better sealed to a broad context than not sealed at all. Simplicity is key here. Always revert to the first extreme example of a single classification, then work towards essential complexity. If there is any doubt, always prefer fewer contexts. Remember, Oracle IRM allows you to change your mind later on. You can implement a design now and continue to change and refine as you learn how the technology is used. It is easy to go from a simple model to a more complex one, it is much harder to take a complex model that is already embedded in the work practice of users and try to simplify it. It is also wise to take a single use case and address this first with the business. Don't try and tackle many different problems from the outset. Do one, learn from the process, refine it and then take what you have learned into the next use case, refine and continue. Once you have a good grasp of the technology and understand how your business will use it, you can then start rolling out the technology wider across the business. Deciding on the use of roles in the context Once you have decided on that first initial use case and a context to create let's look at the details you need to decide upon. For each context, identify; Administrative rolesBusiness owner, the person who makes decisions about who may or may not see content in this context. This is often the person who wanted to use IRM and drove the business purchase. They are the usually the person with the most at risk when sensitive information is lost. Point of contact, the person who will handle requests for access to content. Sometimes the same as the business owner, sometimes a trusted secretary or administrator. Context administrator, the person who will enact the decisions of the Business Owner. Sometimes the point of contact, sometimes a trusted IT person. Document related rolesContributors, the people who create and edit documents in this context. Reviewers, the people who are involved in reviewing documents but are not trusted to secure information to this classification. This role is not always necessary. (See later discussion on Published-work and Work-in-Progress) Readers, the people who read documents from this context. Some people may have several of the roles above, which is fine. What you are trying to do is understand and define how the business interacts with your sensitive information. These roles obviously map directly to roles available in Oracle IRM. Reviewing the features and security for context roles At this point we have decided on a classification of information, understand what roles people in the business will play when administrating this classification and how they will interact with content. The final piece of the puzzle in getting the information for our first context is to look at the permissions people will have to sealed documents. First think why are you protecting the documents in the first place? It is to prevent the loss of leaking of information to the wrong people. To control the information, making sure that people only access the latest versions of documents. You are not using Oracle IRM to prevent unauthorized people from doing legitimate work. This is an important point, with IRM you can erect many barriers to prevent access to content yet too many restrictions and authorized users will often find ways to circumvent using the technology and end up distributing unprotected originals. Because IRM is a security technology, it is easy to get carried away restricting different groups. However I would highly recommend starting with a simple solution with few restrictions. Ensure that everyone who reasonably needs to read documents can do so from the outset. Remember that with Oracle IRM you can change rights to content whenever you wish and tighten security. Always return to the fact that the greatest value IRM brings is that ONLY authorized users can access secured content, remember that simple "one context for the entire business" model. At the start of the deployment you really need to aim for user acceptance and therefore a simple model is more likely to succeed. As time passes and users understand how IRM works you can start to introduce more restrictions and complexity. Another key aspect to focus on is handling exceptions. If you decide on a context model where engineering can only access engineering information, and sales can only access sales data. Act quickly when a sales manager needs legitimate access to a set of engineering documents. Having a quick and effective process for permitting other people with legitimate needs to obtain appropriate access will be rewarded with acceptance from the user community. These use cases can often be satisfied by integrating IRM with a good Identity & Access Management technology which simplifies the process of assigning users the correct business roles. The big print issue... Printing is often an issue of contention, users love to print but the business wants to ensure sensitive information remains in the controlled digital world. There are many cases of physical document loss causing a business pain, it is often overlooked that IRM can help with this issue by limiting the ability to generate physical copies of digital content. However it can be hard to maintain a balance between security and usability when it comes to printing. Consider the following points when deciding about whether to give print rights. Oracle IRM sealed documents can contain watermarks that expose information about the user, time and location of access and the classification of the document. This information would reside in the printed copy making it easier to trace who printed it. Printed documents are slower to distribute in comparison to their digital counterparts, so time sensitive information in printed format may present a lower risk. Print activity is audited, therefore you can monitor and react to users abusing print rights. Summary In summary it is important to think carefully about the way you create your context model. As you ask the business these questions you may get a variety of different requirements. There may be special projects that require a context just for sensitive information created during the lifetime of the project. There may be a department that requires all information in the group is secured and you might have a few senior executives who wish to use IRM to exchange a small number of highly sensitive documents with a very small number of people. Oracle IRM, with its very flexible context classification system, can support all of these use cases. The trick is to introducing the complexity to deliver them at the right level. In another article i'm working on I will go through some examples of how Oracle IRM might map to existing business use cases. But for now, this article covers all the important questions you need to get your IRM service deployed and successfully protecting your most sensitive information.

  Read the article

• ASP.NET Frameworks and Raw Throughput Performance

  - by Rick Strahl

  A few days ago I had a curious thought: With all these different technologies that the ASP.NET stack has to offer, what's the most efficient technology overall to return data for a server request? When I started this it was mere curiosity rather than a real practical need or result. Different tools are used for different problems and so performance differences are to be expected. But still I was curious to see how the various technologies performed relative to each just for raw throughput of the request getting to the endpoint and back out to the client with as little processing in the actual endpoint logic as possible (aka Hello World!). I want to clarify that this is merely an informal test for my own curiosity and I'm sharing the results and process here because I thought it was interesting. It's been a long while since I've done any sort of perf testing on ASP.NET, mainly because I've not had extremely heavy load requirements and because overall ASP.NET performs very well even for fairly high loads so that often it's not that critical to test load performance. This post is not meant to make a point  or even come to a conclusion which tech is better, but just to act as a reference to help understand some of the differences in perf and give a starting point to play around with this yourself. I've included the code for this simple project, so you can play with it and maybe add a few additional tests for different things if you like. Source Code on GitHub I looked at this data for these technologies: ASP.NET Web API ASP.NET MVC WebForms ASP.NET WebPages ASMX AJAX Services  (couldn't get AJAX/JSON to run on IIS8 ) WCF Rest Raw ASP.NET HttpHandlers It's quite a mixed bag, of course and the technologies target different types of development. What started out as mere curiosity turned into a bit of a head scratcher as the results were sometimes surprising. What I describe here is more to satisfy my curiosity more than anything and I thought it interesting enough to discuss on the blog :-) First test: Raw Throughput The first thing I did is test raw throughput for the various technologies. This is the least practical test of course since you're unlikely to ever create the equivalent of a 'Hello World' request in a real life application. The idea here is to measure how much time a 'NOP' request takes to return data to the client. So for this request I create the simplest Hello World request that I could come up for each tech. Http Handler The first is the lowest level approach which is an HTTP handler. public class Handler : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World. Time is: " + DateTime.Now.ToString()); } public bool IsReusable { get { return true; } } } WebForms Next I added a couple of ASPX pages - one using CodeBehind and one using only a markup page. The CodeBehind page simple does this in CodeBehind without any markup in the ASPX page: public partial class HelloWorld_CodeBehind : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello World. Time is: " + DateTime.Now.ToString() ); Response.End(); } } while the Markup page only contains some static output via an expression:<%@ Page Language="C#" AutoEventWireup="false" CodeBehind="HelloWorld_Markup.aspx.cs" Inherits="AspNetFrameworksPerformance.HelloWorld_Markup" %> Hello World. Time is <%= DateTime.Now %> ASP.NET WebPages WebPages is the freestanding Razor implementation of ASP.NET. Here's the simple HelloWorld.cshtml page:Hello World @DateTime.Now WCF REST WCF REST was the token REST implementation for ASP.NET before WebAPI and the inbetween step from ASP.NET AJAX. I'd like to forget that this technology was ever considered for production use, but I'll include it here. Here's an OperationContract class: [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class WcfService { [OperationContract] [WebGet] public Stream HelloWorld() { var data = Encoding.Unicode.GetBytes("Hello World" + DateTime.Now.ToString()); var ms = new MemoryStream(data); // Add your operation implementation here return ms; } } WCF REST can return arbitrary results by returning a Stream object and a content type. The code above turns the string result into a stream and returns that back to the client. ASP.NET AJAX (ASMX Services) I also wanted to test ASP.NET AJAX services because prior to WebAPI this is probably still the most widely used AJAX technology for the ASP.NET stack today. Unfortunately I was completely unable to get this running on my Windows 8 machine. Visual Studio 2012  removed adding of ASP.NET AJAX services, and when I tried to manually add the service and configure the script handler references it simply did not work - I always got a SOAP response for GET and POST operations. No matter what I tried I always ended up getting XML results even when explicitly adding the ScriptHandler. So, I didn't test this (but the code is there - you might be able to test this on a Windows 7 box). ASP.NET MVC Next up is probably the most popular ASP.NET technology at the moment: MVC. Here's the small controller: public class MvcPerformanceController : Controller { public ActionResult Index() { return View(); } public ActionResult HelloWorldCode() { return new ContentResult() { Content = "Hello World. Time is: " + DateTime.Now.ToString() }; } } ASP.NET WebAPI Next up is WebAPI which looks kind of similar to MVC. Except here I have to use a StringContent result to return the response: public class WebApiPerformanceController : ApiController { [HttpGet] public HttpResponseMessage HelloWorldCode() { return new HttpResponseMessage() { Content = new StringContent("Hello World. Time is: " + DateTime.Now.ToString(), Encoding.UTF8, "text/plain") }; } } Testing Take a minute to think about each of the technologies… and take a guess which you think is most efficient in raw throughput. The fastest should be pretty obvious, but the others - maybe not so much. The testing I did is pretty informal since it was mainly to satisfy my curiosity - here's how I did this: I used Apache Bench (ab.exe) from a full Apache HTTP installation to run and log the test results of hitting the server. ab.exe is a small executable that lets you hit a URL repeatedly and provides counter information about the number of requests, requests per second etc. ab.exe and the batch file are located in the \LoadTests folder of the project. An ab.exe command line  looks like this: ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorld which hits the specified URL 100,000 times with a load factor of 20 concurrent requests. This results in output like this:   It's a great way to get a quick and dirty performance summary. Run it a few times to make sure there's not a large amount of varience. You might also want to do an IISRESET to clear the Web Server. Just make sure you do a short test run to warm up the server first - otherwise your first run is likely to be skewed downwards. ab.exe also allows you to specify headers and provide POST data and many other things if you want to get a little more fancy. Here all tests are GET requests to keep it simple. I ran each test: 100,000 iterations Load factor of 20 concurrent connections IISReset before starting A short warm up run for API and MVC to make sure startup cost is mitigated Here is the batch file I used for the test: IISRESET REM make sure you add REM C:\Program Files (x86)\Apache Software Foundation\Apache2.2\bin REM to your path so ab.exe can be found REM Warm up ab.exe -n100 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldJsonab.exe -n100 -c20 http://localhost/aspnetperf/api/HelloWorldJson ab.exe -n100 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorld ab.exe -n100000 -c20 http://localhost/aspnetperf/handler.ashx > handler.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/HelloWorld_CodeBehind.aspx > AspxCodeBehind.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/HelloWorld_Markup.aspx > AspxMarkup.txt ab.exe -n100000 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorld > Wcf.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldCode > Mvc.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorld > WebApi.txt I ran each of these tests 3 times and took the average score for Requests/second, with the machine otherwise idle. I did see a bit of variance when running many tests but the values used here are the medians. Part of this has to do with the fact I ran the tests on my local machine - result would probably more consistent running the load test on a separate machine hitting across the network. I ran these tests locally on my laptop which is a Dell XPS with quad core Sandibridge I7-2720QM @ 2.20ghz and a fast SSD drive on Windows 8. CPU load during tests ran to about 70% max across all 4 cores (IOW, it wasn't overloading the machine). Ideally you can try running these tests on a separate machine hitting the local machine. If I remember correctly IIS 7 and 8 on client OSs don't throttle so the performance here should be Results Ok, let's cut straight to the chase. Below are the results from the tests… It's not surprising that the handler was fastest. But it was a bit surprising to me that the next fastest was WebForms and especially Web Forms with markup over a CodeBehind page. WebPages also fared fairly well. MVC and WebAPI are a little slower and the slowest by far is WCF REST (which again I find surprising). As mentioned at the start the raw throughput tests are not overly practical as they don't test scripting performance for the HTML generation engines or serialization performances of the data engines. All it really does is give you an idea of the raw throughput for the technology from time of request to reaching the endpoint and returning minimal text data back to the client which indicates full round trip performance. But it's still interesting to see that Web Forms performs better in throughput than either MVC, WebAPI or WebPages. It'd be interesting to try this with a few pages that actually have some parsing logic on it, but that's beyond the scope of this throughput test. But what's also amazing about this test is the sheer amount of traffic that a laptop computer is handling. Even the slowest tech managed 5700 requests a second, which is one hell of a lot of requests if you extrapolate that out over a 24 hour period. Remember these are not static pages, but dynamic requests that are being served. Another test - JSON Data Service Results The second test I used a JSON result from several of the technologies. I didn't bother running WebForms and WebPages through this test since that doesn't make a ton of sense to return data from the them (OTOH, returning text from the APIs didn't make a ton of sense either :-) In these tests I have a small Person class that gets serialized and then returned to the client. The Person class looks like this: public class Person { public Person() { Id = 10; Name = "Rick"; Entered = DateTime.Now; } public int Id { get; set; } public string Name { get; set; } public DateTime Entered { get; set; } } Here are the updated handler classes that use Person: Handler public class Handler : IHttpHandler { public void ProcessRequest(HttpContext context) { var action = context.Request.QueryString["action"]; if (action == "json") JsonRequest(context); else TextRequest(context); } public void TextRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World. Time is: " + DateTime.Now.ToString()); } public void JsonRequest(HttpContext context) { var json = JsonConvert.SerializeObject(new Person(), Formatting.None); context.Response.ContentType = "application/json"; context.Response.Write(json); } public bool IsReusable { get { return true; } } } This code adds a little logic to check for a action query string and route the request to an optional JSON result method. To generate JSON, I'm using the same JSON.NET serializer (JsonConvert.SerializeObject) used in Web API to create the JSON response. WCF REST   [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class WcfService { [OperationContract] [WebGet] public Stream HelloWorld() { var data = Encoding.Unicode.GetBytes("Hello World " + DateTime.Now.ToString()); var ms = new MemoryStream(data); // Add your operation implementation here return ms; } [OperationContract] [WebGet(ResponseFormat=WebMessageFormat.Json,BodyStyle=WebMessageBodyStyle.WrappedRequest)] public Person HelloWorldJson() { // Add your operation implementation here return new Person(); } } For WCF REST all I have to do is add a method with the Person result type.   ASP.NET MVC public class MvcPerformanceController : Controller { // // GET: /MvcPerformance/ public ActionResult Index() { return View(); } public ActionResult HelloWorldCode() { return new ContentResult() { Content = "Hello World. Time is: " + DateTime.Now.ToString() }; } public JsonResult HelloWorldJson() { return Json(new Person(), JsonRequestBehavior.AllowGet); } } For MVC all I have to do for a JSON response is return a JSON result. ASP.NET internally uses JavaScriptSerializer. ASP.NET WebAPI public class WebApiPerformanceController : ApiController { [HttpGet] public HttpResponseMessage HelloWorldCode() { return new HttpResponseMessage() { Content = new StringContent("Hello World. Time is: " + DateTime.Now.ToString(), Encoding.UTF8, "text/plain") }; } [HttpGet] public Person HelloWorldJson() { return new Person(); } [HttpGet] public HttpResponseMessage HelloWorldJson2() { var response = new HttpResponseMessage(HttpStatusCode.OK); response.Content = new ObjectContent<Person>(new Person(), GlobalConfiguration.Configuration.Formatters.JsonFormatter); return response; } } Testing and Results To run these data requests I used the following ab.exe commands:REM JSON RESPONSES ab.exe -n100000 -c20 http://localhost/aspnetperf/Handler.ashx?action=json > HandlerJson.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/MvcPerformance/HelloWorldJson > MvcJson.txt ab.exe -n100000 -c20 http://localhost/aspnetperf/api/HelloWorldJson > WebApiJson.txt ab.exe -n100000 -c20 http://localhost/AspNetPerf/WcfService.svc/HelloWorldJson > WcfJson.txt The results from this test run are a bit interesting in that the WebAPI test improved performance significantly over returning plain string content. Here are the results:   The performance for each technology drops a little bit except for WebAPI which is up quite a bit! From this test it appears that WebAPI is actually significantly better performing returning a JSON response, rather than a plain string response. Snag with Apache Benchmark and 'Length Failures' I ran into a little snag with Apache Benchmark, which was reporting failures for my Web API requests when serializing. As the graph shows performance improved significantly from with JSON results from 5580 to 6530 or so which is a 15% improvement (while all others slowed down by 3-8%). However, I was skeptical at first because the WebAPI test reports showed a bunch of errors on about 10% of the requests. Check out this report: Notice the Failed Request count. What the hey? Is WebAPI failing on roughly 10% of requests when sending JSON? Turns out: No it's not! But it took some sleuthing to figure out why it reports these failures. At first I thought that Web API was failing, and so to make sure I re-ran the test with Fiddler attached and runiisning the ab.exe test by using the -X switch: ab.exe -n100 -c10 -X localhost:8888 http://localhost/aspnetperf/api/HelloWorldJson which showed that indeed all requests where returning proper HTTP 200 results with full content. However ab.exe was reporting the errors. After some closer inspection it turned out that the dates varying in size altered the response length in dynamic output. For example: these two results: {"Id":10,"Name":"Rick","Entered":"2012-09-04T10:57:24.841926-10:00"} {"Id":10,"Name":"Rick","Entered":"2012-09-04T10:57:24.8519262-10:00"} are different in length for the number which results in 68 and 69 bytes respectively. The same URL produces different result lengths which is what ab.exe reports. I didn't notice at first bit the same is happening when running the ASHX handler with JSON.NET result since it uses the same serializer that varies the milliseconds. Moral: You can typically ignore Length failures in Apache Benchmark and when in doubt check the actual output with Fiddler. Note that the other failure values are accurate though. Another interesting Side Note: Perf drops over Time As I was running these tests repeatedly I was finding that performance steadily dropped from a startup peak to a 10-15% lower stable level. IOW, with Web API I'd start out with around 6500 req/sec and in subsequent runs it keeps dropping until it would stabalize somewhere around 5900 req/sec occasionally jumping lower. For these tests this is why I did the IIS RESET and warm up for individual tests. This is a little puzzling. Looking at Process Monitor while the test are running memory very quickly levels out as do handles and threads, on the first test run. Subsequent runs everything stays stable, but the performance starts going downwards. This applies to all the technologies - Handlers, Web Forms, MVC, Web API - curious to see if others test this and see similar results. Doing an IISRESET then resets everything and performance starts off at peak again… Summary As I stated at the outset, these were informal to satiate my curiosity not to prove that any technology is better or even faster than another. While there clearly are differences in performance the differences (other than WCF REST which was by far the slowest and the raw handler which was by far the highest) are relatively minor, so there is no need to feel that any one technology is a runaway standout in raw performance. Choosing a technology is about more than pure performance but also about the adequateness for the job and the easy of implementation. The strengths of each technology will make for any minor performance difference we see in these tests. However, to me it's important to get an occasional reality check and compare where new technologies are heading. Often times old stuff that's been optimized and designed for a time of less horse power can utterly blow the doors off newer tech and simple checks like this let you compare. Luckily we're seeing that much of the new stuff performs well even in V1.0 which is great. To me it was very interesting to see Web API perform relatively badly with plain string content, which originally led me to think that Web API might not be properly optimized just yet. For those that caught my Tweets late last week regarding WebAPI's slow responses was with String content which is in fact considerably slower. Luckily where it counts with serialized JSON and XML WebAPI actually performs better. But I do wonder what would make generic string content slower than serialized code? This stresses another point: Don't take a single test as the final gospel and don't extrapolate out from a single set of tests. Certainly Twitter can make you feel like a fool when you post something immediate that hasn't been fleshed out a little more <blush>. Egg on my face. As a result I ended up screwing around with this for a few hours today to compare different scenarios. Well worth the time… I hope you found this useful, if not for the results, maybe for the process of quickly testing a few requests for performance and charting out a comparison. Now onwards with more serious stuff… Resources Source Code on GitHub Apache HTTP Server Project (ab.exe is part of the binary distribution)© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Advanced TSQL Tuning: Why Internals Knowledge Matters

  - by Paul White

  There is much more to query tuning than reducing logical reads and adding covering nonclustered indexes.  Query tuning is not complete as soon as the query returns results quickly in the development or test environments.  In production, your query will compete for memory, CPU, locks, I/O and other resources on the server.  Today’s entry looks at some tuning considerations that are often overlooked, and shows how deep internals knowledge can help you write better TSQL. As always, we’ll need some example data.  In fact, we are going to use three tables today, each of which is structured like this: Each table has 50,000 rows made up of an INTEGER id column and a padding column containing 3,999 characters in every row.  The only difference between the three tables is in the type of the padding column: the first table uses CHAR(3999), the second uses VARCHAR(MAX), and the third uses the deprecated TEXT type.  A script to create a database with the three tables and load the sample data follows: USE master; GO IF DB_ID('SortTest') IS NOT NULL DROP DATABASE SortTest; GO CREATE DATABASE SortTest COLLATE LATIN1_GENERAL_BIN; GO ALTER DATABASE SortTest MODIFY FILE ( NAME = 'SortTest', SIZE = 3GB, MAXSIZE = 3GB ); GO ALTER DATABASE SortTest MODIFY FILE ( NAME = 'SortTest_log', SIZE = 256MB, MAXSIZE = 1GB, FILEGROWTH = 128MB ); GO ALTER DATABASE SortTest SET ALLOW_SNAPSHOT_ISOLATION OFF ; ALTER DATABASE SortTest SET AUTO_CLOSE OFF ; ALTER DATABASE SortTest SET AUTO_CREATE_STATISTICS ON ; ALTER DATABASE SortTest SET AUTO_SHRINK OFF ; ALTER DATABASE SortTest SET AUTO_UPDATE_STATISTICS ON ; ALTER DATABASE SortTest SET AUTO_UPDATE_STATISTICS_ASYNC ON ; ALTER DATABASE SortTest SET PARAMETERIZATION SIMPLE ; ALTER DATABASE SortTest SET READ_COMMITTED_SNAPSHOT OFF ; ALTER DATABASE SortTest SET MULTI_USER ; ALTER DATABASE SortTest SET RECOVERY SIMPLE ; USE SortTest; GO CREATE TABLE dbo.TestCHAR ( id INTEGER IDENTITY (1,1) NOT NULL, padding CHAR(3999) NOT NULL,   CONSTRAINT [PK dbo.TestCHAR (id)] PRIMARY KEY CLUSTERED (id), ) ; CREATE TABLE dbo.TestMAX ( id INTEGER IDENTITY (1,1) NOT NULL, padding VARCHAR(MAX) NOT NULL,   CONSTRAINT [PK dbo.TestMAX (id)] PRIMARY KEY CLUSTERED (id), ) ; CREATE TABLE dbo.TestTEXT ( id INTEGER IDENTITY (1,1) NOT NULL, padding TEXT NOT NULL,   CONSTRAINT [PK dbo.TestTEXT (id)] PRIMARY KEY CLUSTERED (id), ) ; -- ============= -- Load TestCHAR (about 3s) -- ============= INSERT INTO dbo.TestCHAR WITH (TABLOCKX) ( padding ) SELECT padding = REPLICATE(CHAR(65 + (Data.n % 26)), 3999) FROM ( SELECT TOP (50000) n = ROW_NUMBER() OVER (ORDER BY (SELECT 0)) - 1 FROM master.sys.columns C1, master.sys.columns C2, master.sys.columns C3 ORDER BY n ASC ) AS Data ORDER BY Data.n ASC ; -- ============ -- Load TestMAX (about 3s) -- ============ INSERT INTO dbo.TestMAX WITH (TABLOCKX) ( padding ) SELECT CONVERT(VARCHAR(MAX), padding) FROM dbo.TestCHAR ORDER BY id ; -- ============= -- Load TestTEXT (about 5s) -- ============= INSERT INTO dbo.TestTEXT WITH (TABLOCKX) ( padding ) SELECT CONVERT(TEXT, padding) FROM dbo.TestCHAR ORDER BY id ; -- ========== -- Space used -- ========== -- EXECUTE sys.sp_spaceused @objname = 'dbo.TestCHAR'; EXECUTE sys.sp_spaceused @objname = 'dbo.TestMAX'; EXECUTE sys.sp_spaceused @objname = 'dbo.TestTEXT'; ; CHECKPOINT ; That takes around 15 seconds to run, and shows the space allocated to each table in its output: To illustrate the points I want to make today, the example task we are going to set ourselves is to return a random set of 150 rows from each table.  The basic shape of the test query is the same for each of the three test tables: SELECT TOP (150) T.id, T.padding FROM dbo.Test AS T ORDER BY NEWID() OPTION (MAXDOP 1) ; Test 1 – CHAR(3999) Running the template query shown above using the TestCHAR table as the target, we find that the query takes around 5 seconds to return its results.  This seems slow, considering that the table only has 50,000 rows.  Working on the assumption that generating a GUID for each row is a CPU-intensive operation, we might try enabling parallelism to see if that speeds up the response time.  Running the query again (but without the MAXDOP 1 hint) on a machine with eight logical processors, the query now takes 10 seconds to execute – twice as long as when run serially. Rather than attempting further guesses at the cause of the slowness, let’s go back to serial execution and add some monitoring.  The script below monitors STATISTICS IO output and the amount of tempdb used by the test query.  We will also run a Profiler trace to capture any warnings generated during query execution. DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) TC.id, TC.padding FROM dbo.TestCHAR AS TC ORDER BY NEWID() OPTION (MAXDOP 1) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; Let’s take a closer look at the statistics and query plan generated from this: Following the flow of the data from right to left, we see the expected 50,000 rows emerging from the Clustered Index Scan, with a total estimated size of around 191MB.  The Compute Scalar adds a column containing a random GUID (generated from the NEWID() function call) for each row.  With this extra column in place, the size of the data arriving at the Sort operator is estimated to be 192MB. Sort is a blocking operator – it has to examine all of the rows on its input before it can produce its first row of output (the last row received might sort first).  This characteristic means that Sort requires a memory grant – memory allocated for the query’s use by SQL Server just before execution starts.  In this case, the Sort is the only memory-consuming operator in the plan, so it has access to the full 243MB (248,696KB) of memory reserved by SQL Server for this query execution. Notice that the memory grant is significantly larger than the expected size of the data to be sorted.  SQL Server uses a number of techniques to speed up sorting, some of which sacrifice size for comparison speed.  Sorts typically require a very large number of comparisons, so this is usually a very effective optimization.  One of the drawbacks is that it is not possible to exactly predict the sort space needed, as it depends on the data itself.  SQL Server takes an educated guess based on data types, sizes, and the number of rows expected, but the algorithm is not perfect. In spite of the large memory grant, the Profiler trace shows a Sort Warning event (indicating that the sort ran out of memory), and the tempdb usage monitor shows that 195MB of tempdb space was used – all of that for system use.  The 195MB represents physical write activity on tempdb, because SQL Server strictly enforces memory grants – a query cannot ‘cheat’ and effectively gain extra memory by spilling to tempdb pages that reside in memory.  Anyway, the key point here is that it takes a while to write 195MB to disk, and this is the main reason that the query takes 5 seconds overall. If you are wondering why using parallelism made the problem worse, consider that eight threads of execution result in eight concurrent partial sorts, each receiving one eighth of the memory grant.  The eight sorts all spilled to tempdb, resulting in inefficiencies as the spilled sorts competed for disk resources.  More importantly, there are specific problems at the point where the eight partial results are combined, but I’ll cover that in a future post. CHAR(3999) Performance Summary: 5 seconds elapsed time 243MB memory grant 195MB tempdb usage 192MB estimated sort set 25,043 logical reads Sort Warning Test 2 – VARCHAR(MAX) We’ll now run exactly the same test (with the additional monitoring) on the table using a VARCHAR(MAX) padding column: DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) TM.id, TM.padding FROM dbo.TestMAX AS TM ORDER BY NEWID() OPTION (MAXDOP 1) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; This time the query takes around 8 seconds to complete (3 seconds longer than Test 1).  Notice that the estimated row and data sizes are very slightly larger, and the overall memory grant has also increased very slightly to 245MB.  The most marked difference is in the amount of tempdb space used – this query wrote almost 391MB of sort run data to the physical tempdb file.  Don’t draw any general conclusions about VARCHAR(MAX) versus CHAR from this – I chose the length of the data specifically to expose this edge case.  In most cases, VARCHAR(MAX) performs very similarly to CHAR – I just wanted to make test 2 a bit more exciting. MAX Performance Summary: 8 seconds elapsed time 245MB memory grant 391MB tempdb usage 193MB estimated sort set 25,043 logical reads Sort warning Test 3 – TEXT The same test again, but using the deprecated TEXT data type for the padding column: DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) TT.id, TT.padding FROM dbo.TestTEXT AS TT ORDER BY NEWID() OPTION (MAXDOP 1, RECOMPILE) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; This time the query runs in 500ms.  If you look at the metrics we have been checking so far, it’s not hard to understand why: TEXT Performance Summary: 0.5 seconds elapsed time 9MB memory grant 5MB tempdb usage 5MB estimated sort set 207 logical reads 596 LOB logical reads Sort warning SQL Server’s memory grant algorithm still underestimates the memory needed to perform the sorting operation, but the size of the data to sort is so much smaller (5MB versus 193MB previously) that the spilled sort doesn’t matter very much.  Why is the data size so much smaller?  The query still produces the correct results – including the large amount of data held in the padding column – so what magic is being performed here? TEXT versus MAX Storage The answer lies in how columns of the TEXT data type are stored.  By default, TEXT data is stored off-row in separate LOB pages – which explains why this is the first query we have seen that records LOB logical reads in its STATISTICS IO output.  You may recall from my last post that LOB data leaves an in-row pointer to the separate storage structure holding the LOB data. SQL Server can see that the full LOB value is not required by the query plan until results are returned, so instead of passing the full LOB value down the plan from the Clustered Index Scan, it passes the small in-row structure instead.  SQL Server estimates that each row coming from the scan will be 79 bytes long – 11 bytes for row overhead, 4 bytes for the integer id column, and 64 bytes for the LOB pointer (in fact the pointer is rather smaller – usually 16 bytes – but the details of that don’t really matter right now). OK, so this query is much more efficient because it is sorting a very much smaller data set – SQL Server delays retrieving the LOB data itself until after the Sort starts producing its 150 rows.  The question that normally arises at this point is: Why doesn’t SQL Server use the same trick when the padding column is defined as VARCHAR(MAX)? The answer is connected with the fact that if the actual size of the VARCHAR(MAX) data is 8000 bytes or less, it is usually stored in-row in exactly the same way as for a VARCHAR(8000) column – MAX data only moves off-row into LOB storage when it exceeds 8000 bytes.  The default behaviour of the TEXT type is to be stored off-row by default, unless the ‘text in row’ table option is set suitably and there is room on the page.  There is an analogous (but opposite) setting to control the storage of MAX data – the ‘large value types out of row’ table option.  By enabling this option for a table, MAX data will be stored off-row (in a LOB structure) instead of in-row.  SQL Server Books Online has good coverage of both options in the topic In Row Data. The MAXOOR Table The essential difference, then, is that MAX defaults to in-row storage, and TEXT defaults to off-row (LOB) storage.  You might be thinking that we could get the same benefits seen for the TEXT data type by storing the VARCHAR(MAX) values off row – so let’s look at that option now.  This script creates a fourth table, with the VARCHAR(MAX) data stored off-row in LOB pages: CREATE TABLE dbo.TestMAXOOR ( id INTEGER IDENTITY (1,1) NOT NULL, padding VARCHAR(MAX) NOT NULL,   CONSTRAINT [PK dbo.TestMAXOOR (id)] PRIMARY KEY CLUSTERED (id), ) ; EXECUTE sys.sp_tableoption @TableNamePattern = N'dbo.TestMAXOOR', @OptionName = 'large value types out of row', @OptionValue = 'true' ; SELECT large_value_types_out_of_row FROM sys.tables WHERE [schema_id] = SCHEMA_ID(N'dbo') AND name = N'TestMAXOOR' ; INSERT INTO dbo.TestMAXOOR WITH (TABLOCKX) ( padding ) SELECT SPACE(0) FROM dbo.TestCHAR ORDER BY id ; UPDATE TM WITH (TABLOCK) SET padding.WRITE (TC.padding, NULL, NULL) FROM dbo.TestMAXOOR AS TM JOIN dbo.TestCHAR AS TC ON TC.id = TM.id ; EXECUTE sys.sp_spaceused @objname = 'dbo.TestMAXOOR' ; CHECKPOINT ; Test 4 – MAXOOR We can now re-run our test on the MAXOOR (MAX out of row) table: DECLARE @read BIGINT, @write BIGINT ; SELECT @read = SUM(num_of_bytes_read), @write = SUM(num_of_bytes_written) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; SET STATISTICS IO ON ; SELECT TOP (150) MO.id, MO.padding FROM dbo.TestMAXOOR AS MO ORDER BY NEWID() OPTION (MAXDOP 1, RECOMPILE) ; SET STATISTICS IO OFF ; SELECT tempdb_read_MB = (SUM(num_of_bytes_read) - @read) / 1024. / 1024., tempdb_write_MB = (SUM(num_of_bytes_written) - @write) / 1024. / 1024., internal_use_MB = ( SELECT internal_objects_alloc_page_count / 128.0 FROM sys.dm_db_task_space_usage WHERE session_id = @@SPID ) FROM tempdb.sys.database_files AS DBF JOIN sys.dm_io_virtual_file_stats(2, NULL) AS FS ON FS.file_id = DBF.file_id WHERE DBF.type_desc = 'ROWS' ; TEXT Performance Summary: 0.3 seconds elapsed time 245MB memory grant 0MB tempdb usage 193MB estimated sort set 207 logical reads 446 LOB logical reads No sort warning The query runs very quickly – slightly faster than Test 3, and without spilling the sort to tempdb (there is no sort warning in the trace, and the monitoring query shows zero tempdb usage by this query).  SQL Server is passing the in-row pointer structure down the plan and only looking up the LOB value on the output side of the sort. The Hidden Problem There is still a huge problem with this query though – it requires a 245MB memory grant.  No wonder the sort doesn’t spill to tempdb now – 245MB is about 20 times more memory than this query actually requires to sort 50,000 records containing LOB data pointers.  Notice that the estimated row and data sizes in the plan are the same as in test 2 (where the MAX data was stored in-row). The optimizer assumes that MAX data is stored in-row, regardless of the sp_tableoption setting ‘large value types out of row’.  Why?  Because this option is dynamic – changing it does not immediately force all MAX data in the table in-row or off-row, only when data is added or actually changed.  SQL Server does not keep statistics to show how much MAX or TEXT data is currently in-row, and how much is stored in LOB pages.  This is an annoying limitation, and one which I hope will be addressed in a future version of the product. So why should we worry about this?  Excessive memory grants reduce concurrency and may result in queries waiting on the RESOURCE_SEMAPHORE wait type while they wait for memory they do not need.  245MB is an awful lot of memory, especially on 32-bit versions where memory grants cannot use AWE-mapped memory.  Even on a 64-bit server with plenty of memory, do you really want a single query to consume 0.25GB of memory unnecessarily?  That’s 32,000 8KB pages that might be put to much better use. The Solution The answer is not to use the TEXT data type for the padding column.  That solution happens to have better performance characteristics for this specific query, but it still results in a spilled sort, and it is hard to recommend the use of a data type which is scheduled for removal.  I hope it is clear to you that the fundamental problem here is that SQL Server sorts the whole set arriving at a Sort operator.  Clearly, it is not efficient to sort the whole table in memory just to return 150 rows in a random order. The TEXT example was more efficient because it dramatically reduced the size of the set that needed to be sorted.  We can do the same thing by selecting 150 unique keys from the table at random (sorting by NEWID() for example) and only then retrieving the large padding column values for just the 150 rows we need.  The following script implements that idea for all four tables: SET STATISTICS IO ON ; WITH TestTable AS ( SELECT * FROM dbo.TestCHAR ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id = ANY (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; WITH TestTable AS ( SELECT * FROM dbo.TestMAX ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id IN (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; WITH TestTable AS ( SELECT * FROM dbo.TestTEXT ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id IN (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; WITH TestTable AS ( SELECT * FROM dbo.TestMAXOOR ), TopKeys AS ( SELECT TOP (150) id FROM TestTable ORDER BY NEWID() ) SELECT T1.id, T1.padding FROM TestTable AS T1 WHERE T1.id IN (SELECT id FROM TopKeys) OPTION (MAXDOP 1) ; SET STATISTICS IO OFF ; All four queries now return results in much less than a second, with memory grants between 6 and 12MB, and without spilling to tempdb.  The small remaining inefficiency is in reading the id column values from the clustered primary key index.  As a clustered index, it contains all the in-row data at its leaf.  The CHAR and VARCHAR(MAX) tables store the padding column in-row, so id values are separated by a 3999-character column, plus row overhead.  The TEXT and MAXOOR tables store the padding values off-row, so id values in the clustered index leaf are separated by the much-smaller off-row pointer structure.  This difference is reflected in the number of logical page reads performed by the four queries: Table 'TestCHAR' logical reads 25511 lob logical reads 000 Table 'TestMAX'. logical reads 25511 lob logical reads 000 Table 'TestTEXT' logical reads 00412 lob logical reads 597 Table 'TestMAXOOR' logical reads 00413 lob logical reads 446 We can increase the density of the id values by creating a separate nonclustered index on the id column only.  This is the same key as the clustered index, of course, but the nonclustered index will not include the rest of the in-row column data. CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestCHAR (id); CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestMAX (id); CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestTEXT (id); CREATE UNIQUE NONCLUSTERED INDEX uq1 ON dbo.TestMAXOOR (id); The four queries can now use the very dense nonclustered index to quickly scan the id values, sort them by NEWID(), select the 150 ids we want, and then look up the padding data.  The logical reads with the new indexes in place are: Table 'TestCHAR' logical reads 835 lob logical reads 0 Table 'TestMAX' logical reads 835 lob logical reads 0 Table 'TestTEXT' logical reads 686 lob logical reads 597 Table 'TestMAXOOR' logical reads 686 lob logical reads 448 With the new index, all four queries use the same query plan (click to enlarge): Performance Summary: 0.3 seconds elapsed time 6MB memory grant 0MB tempdb usage 1MB sort set 835 logical reads (CHAR, MAX) 686 logical reads (TEXT, MAXOOR) 597 LOB logical reads (TEXT) 448 LOB logical reads (MAXOOR) No sort warning I’ll leave it as an exercise for the reader to work out why trying to eliminate the Key Lookup by adding the padding column to the new nonclustered indexes would be a daft idea Conclusion This post is not about tuning queries that access columns containing big strings.  It isn’t about the internal differences between TEXT and MAX data types either.  It isn’t even about the cool use of UPDATE .WRITE used in the MAXOOR table load.  No, this post is about something else: Many developers might not have tuned our starting example query at all – 5 seconds isn’t that bad, and the original query plan looks reasonable at first glance.  Perhaps the NEWID() function would have been blamed for ‘just being slow’ – who knows.  5 seconds isn’t awful – unless your users expect sub-second responses – but using 250MB of memory and writing 200MB to tempdb certainly is!  If ten sessions ran that query at the same time in production that’s 2.5GB of memory usage and 2GB hitting tempdb.  Of course, not all queries can be rewritten to avoid large memory grants and sort spills using the key-lookup technique in this post, but that’s not the point either. The point of this post is that a basic understanding of execution plans is not enough.  Tuning for logical reads and adding covering indexes is not enough.  If you want to produce high-quality, scalable TSQL that won’t get you paged as soon as it hits production, you need a deep understanding of execution plans, and as much accurate, deep knowledge about SQL Server as you can lay your hands on.  The advanced database developer has a wide range of tools to use in writing queries that perform well in a range of circumstances. By the way, the examples in this post were written for SQL Server 2008.  They will run on 2005 and demonstrate the same principles, but you won’t get the same figures I did because 2005 had a rather nasty bug in the Top N Sort operator.  Fair warning: if you do decide to run the scripts on a 2005 instance (particularly the parallel query) do it before you head out for lunch… This post is dedicated to the people of Christchurch, New Zealand. © 2011 Paul White email: @[email protected] twitter: @SQL_Kiwi

  Read the article

• Plan Caching and Query Memory Part I – When not to use stored procedure or other plan caching mechanisms like sp_executesql or prepared statement

  - by sqlworkshops

    The most common performance mistake SQL Server developers make: SQL Server estimates memory requirement for queries at compilation time. This mechanism is fine for dynamic queries that need memory, but not for queries that cache the plan. With dynamic queries the plan is not reused for different set of parameters values / predicates and hence different amount of memory can be estimated based on different set of parameter values / predicates. Common memory allocating queries are that perform Sort and do Hash Match operations like Hash Join or Hash Aggregation or Hash Union. This article covers Sort with examples. It is recommended to read Plan Caching and Query Memory Part II after this article which covers Hash Match operations.   When the plan is cached by using stored procedure or other plan caching mechanisms like sp_executesql or prepared statement, SQL Server estimates memory requirement based on first set of execution parameters. Later when the same stored procedure is called with different set of parameter values, the same amount of memory is used to execute the stored procedure. This might lead to underestimation / overestimation of memory on plan reuse, overestimation of memory might not be a noticeable issue for Sort operations, but underestimation of memory will lead to spill over tempdb resulting in poor performance.   This article covers underestimation / overestimation of memory for Sort. Plan Caching and Query Memory Part II covers underestimation / overestimation for Hash Match operation. It is important to note that underestimation of memory for Sort and Hash Match operations lead to spill over tempdb and hence negatively impact performance. Overestimation of memory affects the memory needs of other concurrently executing queries. In addition, it is important to note, with Hash Match operations, overestimation of memory can actually lead to poor performance.   To read additional articles I wrote click here.   In most cases it is cheaper to pay for the compilation cost of dynamic queries than huge cost for spill over tempdb, unless memory requirement for a stored procedure does not change significantly based on predicates.   The best way to learn is to practice. To create the below tables and reproduce the behavior, join the mailing list by using this link: www.sqlworkshops.com/ml and I will send you the table creation script. Most of these concepts are also covered in our webcasts: www.sqlworkshops.com/webcasts   Enough theory, let’s see an example where we sort initially 1 month of data and then use the stored procedure to sort 6 months of data.   Let’s create a stored procedure that sorts customers by name within certain date range.   --Example provided by www.sqlworkshops.com create proc CustomersByCreationDate @CreationDateFrom datetime, @CreationDateTo datetime as begin       declare @CustomerID int, @CustomerName varchar(48), @CreationDate datetime       select @CustomerName = c.CustomerName, @CreationDate = c.CreationDate from Customers c             where c.CreationDate between @CreationDateFrom and @CreationDateTo             order by c.CustomerName       option (maxdop 1)       end go Let’s execute the stored procedure initially with 1 month date range.   set statistics time on go --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-31' go The stored procedure took 48 ms to complete.     The stored procedure was granted 6656 KB based on 43199.9 rows being estimated.       The estimated number of rows, 43199.9 is similar to actual number of rows 43200 and hence the memory estimation should be ok.       There was no Sort Warnings in SQL Profiler.      Now let’s execute the stored procedure with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 679 ms to complete.      The stored procedure was granted 6656 KB based on 43199.9 rows being estimated.      The estimated number of rows, 43199.9 is way different from the actual number of rows 259200 because the estimation is based on the first set of parameter value supplied to the stored procedure which is 1 month in our case. This underestimation will lead to sort spill over tempdb, resulting in poor performance.      There was Sort Warnings in SQL Profiler.    To monitor the amount of data written and read from tempdb, one can execute select num_of_bytes_written, num_of_bytes_read from sys.dm_io_virtual_file_stats(2, NULL) before and after the stored procedure execution, for additional information refer to the webcast: www.sqlworkshops.com/webcasts.     Let’s recompile the stored procedure and then let’s first execute the stored procedure with 6 month date range.  In a production instance it is not advisable to use sp_recompile instead one should use DBCC FREEPROCCACHE (plan_handle). This is due to locking issues involved with sp_recompile, refer to our webcasts for further details.   exec sp_recompile CustomersByCreationDate go --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-06-30' go Now the stored procedure took only 294 ms instead of 679 ms.    The stored procedure was granted 26832 KB of memory.      The estimated number of rows, 259200 is similar to actual number of rows of 259200. Better performance of this stored procedure is due to better estimation of memory and avoiding sort spill over tempdb.      There was no Sort Warnings in SQL Profiler.       Now let’s execute the stored procedure with 1 month date range.   --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-31' go The stored procedure took 49 ms to complete, similar to our very first stored procedure execution.     This stored procedure was granted more memory (26832 KB) than necessary memory (6656 KB) based on 6 months of data estimation (259200 rows) instead of 1 month of data estimation (43199.9 rows). This is because the estimation is based on the first set of parameter value supplied to the stored procedure which is 6 months in this case. This overestimation did not affect performance, but it might affect performance of other concurrent queries requiring memory and hence overestimation is not recommended. This overestimation might affect performance Hash Match operations, refer to article Plan Caching and Query Memory Part II for further details.    Let’s recompile the stored procedure and then let’s first execute the stored procedure with 2 day date range. exec sp_recompile CustomersByCreationDate go --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-02' go The stored procedure took 1 ms.      The stored procedure was granted 1024 KB based on 1440 rows being estimated.      There was no Sort Warnings in SQL Profiler.      Now let’s execute the stored procedure with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-06-30' go   The stored procedure took 955 ms to complete, way higher than 679 ms or 294ms we noticed before.      The stored procedure was granted 1024 KB based on 1440 rows being estimated. But we noticed in the past this stored procedure with 6 month date range needed 26832 KB of memory to execute optimally without spill over tempdb. This is clear underestimation of memory and the reason for the very poor performance.      There was Sort Warnings in SQL Profiler. Unlike before this was a Multiple pass sort instead of Single pass sort. This occurs when granted memory is too low.      Intermediate Summary: This issue can be avoided by not caching the plan for memory allocating queries. Other possibility is to use recompile hint or optimize for hint to allocate memory for predefined date range.   Let’s recreate the stored procedure with recompile hint. --Example provided by www.sqlworkshops.com drop proc CustomersByCreationDate go create proc CustomersByCreationDate @CreationDateFrom datetime, @CreationDateTo datetime as begin       declare @CustomerID int, @CustomerName varchar(48), @CreationDate datetime       select @CustomerName = c.CustomerName, @CreationDate = c.CreationDate from Customers c             where c.CreationDate between @CreationDateFrom and @CreationDateTo             order by c.CustomerName       option (maxdop 1, recompile)       end go Let’s execute the stored procedure initially with 1 month date range and then with 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-30' exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 48ms and 291 ms in line with previous optimal execution times.      The stored procedure with 1 month date range has good estimation like before.      The stored procedure with 6 month date range also has good estimation and memory grant like before because the query was recompiled with current set of parameter values.      The compilation time and compilation CPU of 1 ms is not expensive in this case compared to the performance benefit.     Let’s recreate the stored procedure with optimize for hint of 6 month date range.   --Example provided by www.sqlworkshops.com drop proc CustomersByCreationDate go create proc CustomersByCreationDate @CreationDateFrom datetime, @CreationDateTo datetime as begin       declare @CustomerID int, @CustomerName varchar(48), @CreationDate datetime       select @CustomerName = c.CustomerName, @CreationDate = c.CreationDate from Customers c             where c.CreationDate between @CreationDateFrom and @CreationDateTo             order by c.CustomerName       option (maxdop 1, optimize for (@CreationDateFrom = '2001-01-01', @CreationDateTo ='2001-06-30'))       end go Let’s execute the stored procedure initially with 1 month date range and then with 6 month date range.   --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-01-30' exec CustomersByCreationDate '2001-01-01', '2001-06-30' go The stored procedure took 48ms and 291 ms in line with previous optimal execution times.    The stored procedure with 1 month date range has overestimation of rows and memory. This is because we provided hint to optimize for 6 months of data.      The stored procedure with 6 month date range has good estimation and memory grant because we provided hint to optimize for 6 months of data.       Let’s execute the stored procedure with 12 month date range using the currently cashed plan for 6 month date range. --Example provided by www.sqlworkshops.com exec CustomersByCreationDate '2001-01-01', '2001-12-31' go The stored procedure took 1138 ms to complete.      2592000 rows were estimated based on optimize for hint value for 6 month date range. Actual number of rows is 524160 due to 12 month date range.      The stored procedure was granted enough memory to sort 6 month date range and not 12 month date range, so there will be spill over tempdb.      There was Sort Warnings in SQL Profiler.      As we see above, optimize for hint cannot guarantee enough memory and optimal performance compared to recompile hint.   This article covers underestimation / overestimation of memory for Sort. Plan Caching and Query Memory Part II covers underestimation / overestimation for Hash Match operation. It is important to note that underestimation of memory for Sort and Hash Match operations lead to spill over tempdb and hence negatively impact performance. Overestimation of memory affects the memory needs of other concurrently executing queries. In addition, it is important to note, with Hash Match operations, overestimation of memory can actually lead to poor performance.   Summary: Cached plan might lead to underestimation or overestimation of memory because the memory is estimated based on first set of execution parameters. It is recommended not to cache the plan if the amount of memory required to execute the stored procedure has a wide range of possibilities. One can mitigate this by using recompile hint, but that will lead to compilation overhead. However, in most cases it might be ok to pay for compilation rather than spilling sort over tempdb which could be very expensive compared to compilation cost. The other possibility is to use optimize for hint, but in case one sorts more data than hinted by optimize for hint, this will still lead to spill. On the other side there is also the possibility of overestimation leading to unnecessary memory issues for other concurrently executing queries. In case of Hash Match operations, this overestimation of memory might lead to poor performance. When the values used in optimize for hint are archived from the database, the estimation will be wrong leading to worst performance, so one has to exercise caution before using optimize for hint, recompile hint is better in this case. I explain these concepts with detailed examples in my webcasts (www.sqlworkshops.com/webcasts), I recommend you to watch them. The best way to learn is to practice. To create the above tables and reproduce the behavior, join the mailing list at www.sqlworkshops.com/ml and I will send you the relevant SQL Scripts.     Register for the upcoming 3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop in London, United Kingdom during March 15-17, 2011, click here to register / Microsoft UK TechNet.These are hands-on workshops with a maximum of 12 participants and not lectures. For consulting engagements click here.     Disclaimer and copyright information:This article refers to organizations and products that may be the trademarks or registered trademarks of their various owners. Copyright of this article belongs to R Meyyappan / www.sqlworkshops.com. You may freely use the ideas and concepts discussed in this article with acknowledgement (www.sqlworkshops.com), but you may not claim any of it as your own work. This article is for informational purposes only; you use any of the suggestions given here entirely at your own risk.   R Meyyappan [email protected] LinkedIn: http://at.linkedin.com/in/rmeyyappan

  Read the article

• CodePlex Daily Summary for Tuesday, November 22, 2011

  CodePlex Daily Summary for Tuesday, November 22, 2011Popular ReleasesDeveloper Team Article System Management: DTASM v1.3: ?? ??? ???? 3 ????? ???? ???? ????? ??? : - ????? ?????? ????? ???? ?? ??? ???? ????? ?? ??? ? ?? ???? ?????? ???? ?? ???? ????? ?? . - ??? ?? ???? ????? ???? ????? ???? ???? ?? ????? , ?????? ????? ????? ?? ??? . - ??? ??????? ??? ??? ???? ?? ????? ????? ????? .VideoLan DotNet for WinForm, WPF & Silverlight 5: VideoLan DotNet for WinForm, WPF, SL5 - 2011.11.22: The new version contains Silverlight 5 library: Vlc.DotNet.Silverlight. A sample could be tested here The new version add and correct many features : Correction : Reinitialize some variables Deprecate : Logging API, since VLC 1.2 (08/20/2011) Add subitem in LocationMedia (for Youtube videos, ...) Update Wpf sample to use Youtube videos Many others correctionsSharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...Anno 2070 Assistant: v0.1.0 (STABLE): Version 0.1.0 Features Production Chains Eco Production Chains (Complete) Tycoon Production Chains (Disabled - Incomplete) Tech Production Chains (Disabled - Incomplete) Supply (Disabled - Incomplete) Calculator (Disabled - Incomplete) Building Layouts Eco Building Layouts (Complete) Tycoon Building Layouts (Disabled - Incomplete) Tech Building Layouts (Disabled - Incomplete) Credits (Complete)Free SharePoint 2010 Sites Templates: SharePoint Server 2010 Sites Templates: here is the list of sites templates to be downloadedVsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 30 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 30 (beta)New: Support for TortoiseSVN 1.7 added. (the download contains both setups, for TortoiseSVN 1.6 and 1.7) New: OpenModifiedDocumentDialog displays conflicted files now. New: OpenModifiedDocument allows to group items by changelist now. Fix: OpenModifiedDocumentDialog caused Visual Studio 2010 to freeze sometimes. Fix: The installer didn...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.30: Highlight features & improvements: • Performance optimization. • Back in stock notifications. • Product special price support. • Catalog mode (based on customer role) To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).WPF Converters: WPF Converters V1.2.0.0: support for enumerations, value types, and reference types in the expression converter's equality operators the expression converter now handles DependencyProperty.UnsetValue as argument values correctly (#4062) StyleCop conformance (more or less)Json.NET: Json.NET 4.0 Release 4: Change - JsonTextReader.Culture is now CultureInfo.InvariantCulture by default Change - KeyValurPairConverter no longer cares about the order of the key and value properties Change - Time zone conversions now use new TimeZoneInfo instead of TimeZone Fix - Fixed boolean values sometimes being capitalized when converting to XML Fix - Fixed error when deserializing ConcurrentDictionary Fix - Fixed serializing some Uris returning the incorrect value Fix - Fixed occasional error when...Media Companion: MC 3.423b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Replaced 'Rebuild' with 'Refresh' throughout entire code. Rebuild will now be known as Refresh. mc_com.exe has been fully updated TV Show Resolutions... Resolved issue #206 - having to hit save twice when updating runtime manually Shrunk cache size and lowered loading times f...Delta Engine: Delta Engine Beta Preview v0.9.1: v0.9.1 beta release with lots of refactoring, fixes, new samples and support for iOS, Android and WP7 (you need a Marketplace account however). If you want a binary release for the games (like v0.9.0), just say so in the Forum or here and we will quickly prepare one. It is just not much different from v0.9.0, so I left it out this time. See http://DeltaEngine.net/Wiki.Roadmap for details.SharpMap - Geospatial Application Framework for the CLR: SharpMap-0.9-AnyCPU-Trunk-2011.11.17: This is a build of SharpMap from the 0.9 development trunk as per 2011-11-17 For most applications the AnyCPU release is the recommended, but in case you need an x86 build that is included to. For some dataproviders (GDAL/OGR, SqLite, PostGis) you need to also referense the SharpMap.Extensions assembly For SqlServer Spatial you need to reference the SharpMap.SqlServerSpatial assemblyAJAX Control Toolkit: November 2011 Release: AJAX Control Toolkit Release Notes - November 2011 Release Version 51116November 2011 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 - Binary – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 - Binary – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found h...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.36: Fix for issue #16908: string literals containing ASP.NET replacement syntax fail if the ASP.NET code contains the same character as the string literal delimiter. Also, we shouldn't be changing the delimiter for those literals or combining them with other literals; the developer may have specifically chosen the delimiter used because of possible content inserted by ASP.NET code. This logic is normally off; turn it on via the -aspnet command-line flag (or the Code.Settings.AllowEmbeddedAspNetBl...MVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.7: Reworked API to be more consistent. See Supported formats table. Added some more helper methods - e.g. OpenEntryStream (RarArchive/RarReader does not support this) Fixed up testsSilverlight Toolkit: Windows Phone Toolkit - Nov 2011 (7.1 SDK): This release is coming soon! What's new ListPicker once again works in a ScrollViewer LongListSelector bug fixes around OutOfRange exceptions, wrong ordering of items, grouping issues, and scrolling events. ItemTuple is now refactored to be the public type LongListSelectorItem to provide users better access to the values in selection changed handlers. PerformanceProgressBar binding fix for IsIndeterminate (item 9767 and others) There is no longer a GestureListener dependency with the C...New ProjectsAndrecorder: Andrecorder???Android???????,???????????????????,????????????????,????????!Android Tree Bulletin: Android bulletin reader in tree format.Bài t?p l?p môn HCI: Name: Ph?n m?m qu?n lý thu h?c phí tru?ng d?i h?c Công Nghi?p Hà N?i Basic Grid Collision sample in XNA: This project shows how to implement a basic grid collision in XNA. The project uses the XNA 4.0 framework and C#Club Manager: Club Manager is a web site for managing sport clubs / teams.Create email with encrypt text implement TEA encryption and Web Service: RahaTEA Mail is an application to send messages in secret. These applications implement TEA encryption and web serviceCRM 2011 Layers: Several .net layers to customize CRM 2011CTEF: China Tomorrow Education Foundation websitedns?????: ??c#???dns?????。????????，???????，??????。EAF: Extensibility Application FrameworkEnergy SBA: In order to compete with large companies for Federal contracts, small business need information. This application seeks to show standard methods of using remote APIs to integrate information into a Metro interface using services provided by the Small Business Administration (SBA)EPiOptimiser - Scan your EPiServer configuration to optimise start up times: EPiScanner scans your EPiServer configuration to optimise start ups by generating a recommended exclude list of assemblies to include in EPiServer framework config. It can be used on command line, as a custom build task or integrated into Visual Studio as an external tool.FreeIDS - Free Intrusion Detection System: Don't want someone to use your computer? Don't want to use a system password? Want to see when someone accessed your computer? Time/Date? FreeIDS is it!FtpServerAdministrator: FtpServerAdministrator makes it easier to administer some ftp server by code, although it can only be used for FileZilla server now. It's developed in C#.GreenPoint Online: Tools and components that help you customize an Office 365 / SharePoint Online Environment.HCC C# Workshop: This project contains the code for the exercises of the HCC C# WorkshopKsigDo - Real time view model syncing across user screens: KsigDo show real time view model syncing across user screens - using ASP.NET, Knockout and SignalR. Real time data syncing across user views *was* hard, especially in web applications. Most of the time, the second user needs to refresh the screen, to see the changes made by first user, or we need to implement some long polling that fetches the data and does the update manually. Now, with SignalR and Knockout, ASP.NET developers can take advantage of view model syncing across users, that...lineseven: ???????????????。Mail Size Labeler for GMail: A small utility that labels large e-mails on your gmail account. This utility scan you gmail account, and adds labels to large e-mail so you can clean your mailbox and free space. The labels this utility adds are: Size 1M-2M Size 2M-5M Size 5M-10M Size 10M-15M Size 15M plus Note: a single e-mail thread may get multiple labels if different e-mails of the thread fit different filters.MathService: Complex digits, standart class extentions etc.MyGameProject: gamesMySQL Connect 2 ASP.NET: Example project to show how to connect MySQL database to ASP.NET web project. IDE: Visual Studio 2010 Pro Programming language: C# Detailed information in the article here: http://epavlov.net/blog/2011/11/13/connect-to-mysql-in-visual-studio/ nl: Nutri Leaf Devomr.event.js: Simple js event injecterPastebin4DotNet: This project is an example of how to consume an API, in this case I consummed the Pastebin API.Pomelo: Pomelo is a website example.QuickDevFrameWork: ????????,??,??,????,ioc ?????postsharp?aopReadable Passphrase Generator: Generates passphrases which are (mostly) grammatically correct but nonsensical. These are easy to remember but difficult to guess (for humans or computers). Developed in C# with a KeePass plugin, console app and public API.Rosyama.ru for Windows Phone 7: ?????????? Windows Phone 7 ??? ???????? ???????? ?? ???? rosyama.ru. ?????????? ??????? ?????????? ? ???????? ????????? ???????. SimpleBatch: As the name suggests, this is a simple batch framework allowing you to define batch jobs in XML format. Thus far, contains a basic selection of processors such as the following; File Email SQL (SQL Server Client) SharePoint Document Library Custom ProcessorSite de Notícias: Projeto de faculdade que consiste na criação de um site de notícias.SPWikiProvisioning: Create update and delete SharePoint wiki pages using feature activation and deactivation handlers.SVN Automated Control With C#: I Created this libaray because I need to control Tortoise SVN automactically with out an interface for my own build server and could not find any resuilts on google to achive this task so I went about creating this libaray which dos most of the task's that I needed. I round that you could control SVN by command line so using that as my basic idear I went about coding the most common commands for SVN most of the commads are done but not all. if you like this libaray then please use it we...TremplinCMS: TremplinCMS is a CMS framework for ASP .NET 4.vlu0206sms: SMSMaker by team0206 developingWCF DataService RequestStream Access on webInvoke HTTP POST: This library provides access to the message body request stream of a WCF Data Service (formerly ADO.NET Data Service), which is not possible with the original WCF Data Service class. You are enabled passing data (e.g. Json, files) via HTTP POST to the request body. It uses the operation context (DbContext) provided by the DataService<T> class to get access to the resquest stream.WebOS: Welcome to join us to build our os projectWp7StarterDantas: Iniciando com Wp7WpfCollaborative3D: WpfCollaborative3DXNA Content Preprocessor: The XNA Content Preprocessor allows you to compile all of your XNA assets outside of your normal XNA project. This means more time building your game or app instead of your content.

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• Powershell Win32_NetworkAdapterConfiguration Not "seeing" PPP Adapter

  - by Ben

  I am trying to get the IP of a PPP VPN network connection, but Win32_NetworkAdapterConfiguration does not seem to "see" it. If I interrogate all adapters using my script, it will see everything but the PPP VPN adapter. Is there a specific filter or something I need to enable, or do I need a different class? My Script: $colItems = Get-wmiobject Win32_NetworkAdapterConfiguration foreach ($objItem in $colItems) { Write-Host Description: $objItem.Description Write-Host IP Address: $objItem.IPAddress Write-Host "" } Script Output: Description: WAN Miniport (SSTP) IP Address: Description: WAN Miniport (IKEv2) IP Address: Description: WAN Miniport (L2TP) IP Address: Description: WAN Miniport (PPTP) IP Address: Description: WAN Miniport (PPPOE) IP Address: Description: WAN Miniport (IPv6) IP Address: Description: WAN Miniport (Network Monitor) IP Address: Description: Intel(R) PRO/Wireless 3945ABG Network Connection IP Address: 192.168.2.5 Description: WAN Miniport (IP) IP Address: ipconfig /all output: PPP adapter My VPN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : My VPN Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.1.8.12(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 10.1.1.3 10.1.1.2 Primary WINS Server . . . . . . . : 10.1.1.2 Secondary WINS Server . . . . . . : 10.1.1.3 NetBIOS over Tcpip. . . . . . . . : Enabled Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Belkin Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Connection Physical Address. . . . . . . . . : 00-3F-3C-22-22-22 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.2.5(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 25 May 2010 20:33:19 Lease Expires . . . . . . . . . . : 22 May 2020 20:33:17 Default Gateway . . . . . . . . . : 192.168.2.1 DHCP Server . . . . . . . . . . . : 192.168.2.1 DNS Servers . . . . . . . . . . . : 192.168.2.1 NetBIOS over Tcpip. . . . . . . . : Enabled Thanks in advance, Ben

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Why is Windows Update trying to install an update I don't need?

  - by Oliver Salzburg

  I have a Windows 7 system that currently has a single update pending: Windows Internet Explorer 9 for Windows 7 for x64-based Systems If I try to install the update, Windows Update will: Create a restore point Fail with the error: Code 9C48 Windows Update encountered an error. The event log for the event reads: Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. If you search the web for that error, there are many other people with the exact same issue. Sadly, I am unable to apply the proposed solutions to my case, because I just installed this system. There is nothing on it, except Windows 7. I installed the system and ran through the updates. I also did the exact same process with this machine several times over the past few days due to a long-term test we just started. I didn't have any problems with any Windows Update on the previous installation runs and I know I didn't do anything different this time because I followed the installation procedures instructions which are to be used during the test. How did this happen and how do I solve it? Further Investigation So, as I always like to do, I ran the update again while running Process Monitor and dug up further details. WindowsUpdate.log First of all, there is a Windows Update log file located at C:\Windows\WindowsUpdate.log which I didn't know about. But I fail to see any significant entry in it, maybe you're more lucky: 2012-04-10 22:46:58:017 956 728 AU AU received approval from Ux for 1 updates 2012-04-10 22:46:58:017 956 728 AU AU setting pending client directive to 'Progress Ux' 2012-04-10 22:46:58:095 956 728 AU BeginInteractiveInstall invoked for Download 2012-04-10 22:46:58:095 956 728 AU Auto-approving update for download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:46:58:095 956 728 AU Auto-approved 1 update(s) for download (for Ux) 2012-04-10 22:46:58:110 956 728 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:46:58:110 956 728 AU ############# 2012-04-10 22:46:58:110 956 728 AU ## START ## AU: Download updates 2012-04-10 22:46:58:110 956 728 AU ######### 2012-04-10 22:46:58:110 956 728 AU # Approved updates = 1 2012-04-10 22:46:58:110 956 728 AU AU initiated download, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, callId = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 728 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:110 956 bb8 DnldMgr ************* 2012-04-10 22:46:58:110 956 bb8 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:110 956 bb8 DnldMgr ********* 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Call ID = {35DF928B-B428-4BAC-8C63-55295967EFBB} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 0, Explicit proxy = 0, Proxy session id = 1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77} 2012-04-10 22:46:58:110 956 bb8 DnldMgr * Updates to download = 1 2012-04-10 22:46:58:110 956 bb8 Agent * Title = Windows Internet Explorer 9 for Windows 7 for x64-based Systems 2012-04-10 22:46:58:110 956 bb8 Agent * UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100 2012-04-10 22:46:58:110 956 bb8 Agent * Bundles 1 updates: 2012-04-10 22:46:58:110 956 bb8 Agent * {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100 2012-04-10 22:46:58:110 956 bb8 DnldMgr *********** DnldMgr: New download job [UpdateId = {6D9A90B7-FAF9-4A47-9EFE-A506264873B3}.100] *********** 2012-04-10 22:46:58:110 956 728 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:110 956 728 AU # Pending download calls = 1 2012-04-10 22:46:58:110 956 728 AU ## RESUMED ## AU: Download update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}, succeeded] 2012-04-10 22:46:58:313 956 bb8 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp] 2012-04-10 22:46:58:313 956 bb8 Agent ************* 2012-04-10 22:46:58:313 956 718 AU ######### 2012-04-10 22:46:58:313 956 718 AU ## END ## AU: Download updates 2012-04-10 22:46:58:313 956 718 AU ############# 2012-04-10 22:46:58:313 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 718 AU Currently showing Progress UX client - so not launching any other client 2012-04-10 22:46:58:313 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:46:58:313 956 aac AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:46:58:313 956 aac AU No featured updates available. 2012-04-10 22:47:00:107 956 aac AU BeginInteractiveInstall invoked for Install 2012-04-10 22:47:00:107 956 aac AU Auto-approving update for install, updateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}.100, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0 2012-04-10 22:47:00:107 956 aac AU Auto-approved 1 update(s) for install (for Ux), installType=1 2012-04-10 22:47:00:107 956 aac AU ############# 2012-04-10 22:47:00:107 956 aac AU ## START ## AU: Install updates 2012-04-10 22:47:00:107 956 aac AU ######### 2012-04-10 22:47:00:107 956 aac AU # Initiating manual install 2012-04-10 22:47:00:107 956 aac AU # Approved updates = 1 2012-04-10 22:47:00:107 956 aac AU ## RESUMED ## AU: Installing update [UpdateId = {B33ACEC1-3265-4D01-9C37-AC0892E95ED9}] 2012-04-10 22:47:13:773 2232 9fc Handler : WARNING: Exit code = 0x8024200B 2012-04-10 22:47:13:773 956 718 AU # WARNING: Install failed, error = 0x80070643 / 0x00009C48 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::: 2012-04-10 22:47:13:773 2232 9fc Handler :: END :: Handler: Command Line Install 2012-04-10 22:47:13:773 2232 9fc Handler ::::::::::::: 2012-04-10 22:47:13:851 956 a7c Agent ********* 2012-04-10 22:47:13:851 956 a7c Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates] 2012-04-10 22:47:13:851 956 718 AU Install call completed. 2012-04-10 22:47:13:851 956 a7c Agent ************* 2012-04-10 22:47:13:851 956 718 AU # WARNING: Install call completed, reboot required = No, error = 0x00000000 2012-04-10 22:47:13:851 956 718 AU ######### 2012-04-10 22:47:13:851 956 718 AU ## END ## AU: Installing updates [CallId = {FCFF2A5C-25AB-4FB9-AB2B-35C65CCA6A9F}] 2012-04-10 22:47:13:851 956 718 AU ############# 2012-04-10 22:47:13:851 956 718 AU Install complete for all calls, reboot NOT needed 2012-04-10 22:47:13:851 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:13:851 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:13:851 956 498 AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:13:851 956 498 AU No featured updates available. 2012-04-10 22:47:14:366 956 168 AU No featured updates notifications to show 2012-04-10 22:47:14:366 956 168 AU UpdateDownloadProperties: 0 download(s) are still in progress. 2012-04-10 22:47:14:366 956 168 AU Triggering Offline detection (non-interactive) 2012-04-10 22:47:14:366 956 168 AU AU setting pending client directive to 'Install Complete Ux' 2012-04-10 22:47:14:366 956 168 AU Changing existing AU client directive from 'Progress Ux' to 'Install Complete Ux', session id = 0x1 2012-04-10 22:47:14:366 956 168 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:14:366 956 b78 AU ############# 2012-04-10 22:47:14:366 956 b78 AU ## START ## AU: Search for updates 2012-04-10 22:47:14:366 956 b78 AU ######### 2012-04-10 22:47:14:366 956 b78 AU ## RESUMED ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU # 1 updates detected 2012-04-10 22:47:16:097 956 718 AU ######### 2012-04-10 22:47:16:097 956 718 AU ## END ## AU: Search for updates [CallId = {0198DD3A-D7B0-48F5-A77D-795F8A1BDCE8}] 2012-04-10 22:47:16:097 956 718 AU ############# 2012-04-10 22:47:16:097 956 718 AU No featured updates notifications to show 2012-04-10 22:47:16:097 956 718 AU Setting AU scheduled install time to 2012-04-11 01:00:00 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:097 956 718 AU Successfully wrote event for AU health state:0 2012-04-10 22:47:16:113 956 55c AU Getting featured update notifications. fIncludeDismissed = true 2012-04-10 22:47:16:113 956 55c AU No featured updates available. 2012-04-10 22:47:18:780 956 bb8 Report REPORT EVENT: {27479C66-E930-4F9C-AFF2-27EDD76DED8F} 2012-04-10 22:47:13:773+0200 1 182 101 {B33ACEC1-3265-4D01-9C37-AC0892E95ED9} 100 80070643 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Internet Explorer 9 for Windows 7 for x64-based Systems. 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2012-04-10 22:47:18:780 956 bb8 Report WER Report sent: 7.5.7601.17514 0x80070643 B33ACEC1-3265-4D01-9C37-AC0892E95ED9 Install 101 Unmanaged 2012-04-10 22:47:18:780 956 bb8 Report CWERReporter finishing event handling. (00000000) WU-IE9-Windows7-x64.exe The actual update that is executed is downloaded and stored at the following location: C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe Executing that file manually, results in the following error message: IE9_main.log The IE9 installer/updater also creates an own log file located at C:\Windows\IE9_main.log For the update session in question, the installer logged: 00:00.000: ==================================================================== 00:00.016: Started: 2012/04/10 (Y/M/D) 23:10:53.897 (local) 00:00.032: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds) 00:00.063: Command line: "C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe" 00:00.078: INFO: Setup installer for Internet Explorer: 9.0.8112.16421 00:00.094: INFO: Previous version of Internet Explorer: 9.0.8112.16443 00:00.110: INFO: Checking if iexplore.exe's current version is between 9.0.6001.0... 00:00.125: INFO: ...and 9.1.0.0... 00:00.141: INFO: Maximum version on which to run IEAK branding is: 9.1.0.0... 00:00.156: ERROR: A newer version of Internet Explorer is already installed on the system. 00:00.188: ERROR: Internet Explorer version check failed. 01:03.789: INFO: Setup exit code: 0x00009C48 (40008) - A more recent version of Internet Explorer is installed. 01:03.820: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll 01:03.852: INFO: SQM Upload returned 403 01:03.867: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE978E.tmp 01:03.883: INFO: Unable to remove directory C:\Windows\TEMP\IE978E.tmp, marking for deletion on reboot. 01:03.898: INFO: Released Internet Explorer Installer Mutex Which pretty much confirms what the error message says when executing the update manually; it's simply already installed or even obsolete because a newer version is installed. So, why does it try to keep installing the update? Possible solutions? Uninstalling Windows Internet Explorer 9 and manually installing the cached C:\Windows\SoftwareDistribution\Download\Install\WU-IE9-Windows7-x64.exe will result in the same error after applying all pending updates. Applying the FixIt for the issue You receive “0x80070643” or “0x643” error codes when you try to install .NET Framework updates through Windows Update or Microsoft Updates will not resolve the issue. Applying the suggested solution for the issue Error message when you try to install updates by using the Windows Update or Microsoft Update Web site: "0x80070003" will not resolve the issue. Running the FixIt Automatically diagnose and fix common problems with Windows Update does report having resolved issues with Windows Update, but didn't resolve the issue. Running the FixIt for the issue How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update does not resolve the issue. Neither with normal nor with aggressive settings.

  Read the article

• When gaming computer freezes with a blank screen and a buzzing sound

  - by The Colour Of Heartache

  I have a problem with random freezes when playing games. Sometimes it's fine for hours, other times it dosn't last even one. I tried googling around and I found recomendations to update my graphics drivers and to test for overheating. The graphics drivers haven't helped worked and Furmark created a consistant heat higher than I get during a crash. I even tried running a game using the Linux dual boot and WINE, that crashed too. Here are the tempreture logs leading up to the latest crash. The GPU dosn't hit 80, and I've hit 90 with no crash on firmark. DATE TIME MHz CPU_0 CPU_1 CPU_2 CPU_3 LOAD% GPU 04/05/12 15:21:00 3200.16 63 58 57 56 15.4 77 04/05/12 15:21:05 3200.16 63 59 58 56 15.8 76 04/05/12 15:21:10 3200.16 62 59 58 55 15.1 78 04/05/12 15:21:15 3200.16 63 59 58 56 16.5 77 04/05/12 15:21:20 3200.16 64 58 58 57 15.3 77 04/05/12 15:21:25 3200.16 63 58 59 56 15.8 78 04/05/12 15:21:30 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 58 58 56 17.0 77 04/05/12 15:21:40 3200.16 63 59 59 56 15.9 77 04/05/12 15:21:45 3200.16 63 58 58 58 15.6 77 04/05/12 15:21:50 3200.16 63 58 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 59 56 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 57 15.8 77 04/05/12 15:21:05 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:10 3200.16 63 57 58 56 15.3 78 04/05/12 15:21:15 3200.16 64 58 58 56 15.4 78 04/05/12 15:21:20 3200.16 63 58 58 56 15.4 77 04/05/12 15:21:25 3200.16 62 58 58 57 15.6 77 04/05/12 15:21:30 3200.16 62 58 58 57 15.8 77 04/05/12 15:21:35 3200.16 63 59 58 56 15.9 77 04/05/12 15:21:40 3200.16 63 58 58 56 15.9 77 04/05/12 15:21:45 3200.16 63 59 58 56 15.6 77 04/05/12 15:21:50 3200.16 62 59 58 58 15.8 77 04/05/12 15:21:55 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:00 3200.16 63 58 58 56 15.9 77 04/05/12 15:22:05 3200.16 63 58 58 56 16.3 77 04/05/12 15:22:10 3200.16 64 58 59 56 15.7 77 04/05/12 15:22:15 3200.16 63 58 60 57 17.2 77 04/05/12 15:22:20 3200.16 63 58 58 56 15.5 78 04/05/12 15:22:25 3200.16 63 58 60 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.6 76 04/05/12 15:22:35 3200.16 64 59 60 57 17.7 77 04/05/12 15:22:40 3200.16 63 59 58 57 16.0 77 04/05/12 15:22:45 3200.16 64 58 58 57 15.8 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 77 04/05/12 15:22:55 3200.16 63 58 59 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 58 57 15.7 77 04/05/12 15:22:05 3200.16 62 58 57 58 15.9 77 04/05/12 15:22:10 3200.16 63 58 59 57 15.9 77 04/05/12 15:22:15 3200.16 63 59 58 56 17.1 77 04/05/12 15:22:20 3200.16 63 58 59 57 16.0 77 04/05/12 15:22:25 3200.16 63 58 58 57 15.9 77 04/05/12 15:22:30 3200.16 63 59 59 57 15.7 77 04/05/12 15:22:35 3200.16 64 59 58 58 21.0 77 04/05/12 15:22:40 3200.16 63 59 58 58 16.0 77 04/05/12 15:22:45 3200.16 64 59 59 57 15.7 77 04/05/12 15:22:50 3200.16 63 59 58 56 15.8 78 04/05/12 15:22:55 3200.16 63 59 58 57 15.8 78 04/05/12 15:23:00 3200.16 63 59 57 57 15.9 77 04/05/12 15:23:05 3200.16 64 58 58 58 15.7 77 04/05/12 15:23:10 3200.16 63 59 58 56 15.9 77 04/05/12 15:23:15 3200.16 64 59 58 57 16.6 77 04/05/12 15:23:20 3200.16 63 59 58 58 16.0 77 04/05/12 15:23:25 3200.16 63 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 63 59 58 56 15.4 78 04/05/12 15:23:35 3200.16 64 60 59 61 17.7 77 04/05/12 15:23:40 3200.16 63 59 58 57 15.6 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.4 76 04/05/12 15:23:50 3200.16 63 59 57 56 15.8 77 04/05/12 15:23:55 3200.16 63 58 57 57 15.6 77 04/05/12 15:24:00 3200.16 63 58 58 58 15.9 77 04/05/12 15:23:05 3200.16 64 59 58 56 15.6 77 04/05/12 15:23:10 3200.16 64 59 58 57 15.9 77 04/05/12 15:23:15 3200.16 63 59 58 59 16.7 77 04/05/12 15:23:20 3200.16 64 58 58 58 16.0 77 04/05/12 15:23:25 3200.16 64 58 58 57 15.7 77 04/05/12 15:23:30 3200.16 64 58 58 57 15.2 78 04/05/12 15:23:35 3200.16 63 59 59 58 17.8 77 04/05/12 15:23:40 3200.16 63 59 59 58 15.8 77 04/05/12 15:23:45 1600.08 53 54 53 52 4.7 76 04/05/12 15:23:50 3200.16 63 59 57 56 16.9 77 04/05/12 15:23:55 3200.16 63 58 59 56 15.7 77 04/05/12 15:24:00 3200.16 63 58 59 57 15.9 77 I also got a dmp file, here's what BlueScreenView gave me. The first three lines were in red, the summery says that the crash was casued by hal.dll and the address hal.dll+12903 Filename Address in Stack From Address To Address Size Time Stamp Time String Product Name File Description File Version Company Full Path hal.dll hal.dll+12903 fffff800`033e0000 fffff800`03429000 0x00049000 0x4a5bdf08 14/07/2009 02:27:36 ntoskrnl.exe ntoskrnl.exe+185923 fffff800`02e05000 fffff800`033e0000 0x005db000 0x4ec7a284 19/11/2011 13:35:16 Microsoft® Windows® Operating System NT Kernel & System 6.1.7600.16917 (win7_gdr.111118-2330) Microsoft Corporation C:\Windows\system32\ntoskrnl.exe pci.sys pci.sys+9aff fffff880`0108f000 fffff880`010c2000 0x00033000 0x4a5bc117 14/07/2009 00:19:51 kdcom.dll fffff800`00bc4000 fffff800`00bce000 0x0000a000 0x4d4d40d9 05/02/2011 13:21:45 mcupdate_GenuineIntel.dll fffff880`00c26000 fffff880`00c6a000 0x00044000 0x4a5bdf66 14/07/2009 02:29:10 PSHED.dll fffff880`00c6a000 fffff880`00c7e000 0x00014000 0x4a5be027 14/07/2009 02:32:23 Microsoft® Windows® Operating System Platform Specific Hardware Error Driver 6.1.7600.16385 (win7_rtm.090713-1255) Microsoft Corporation C:\Windows\system32\PSHED.dll CLFS.SYS fffff880`00c7e000 fffff880`00cdc000 0x0005e000 0x4a5bc11d 14/07/2009 00:19:57 CI.dll fffff880`00cdc000 fffff880`00d9c000 0x000c0000 0x4a5be01d 14/07/2009 02:32:13 Wdf01000.sys fffff880`00e0e000 fffff880`00eb2000 0x000a4000 0x4a5bc19f 14/07/2009 00:22:07 WDFLDR.SYS fffff880`00eb2000 fffff880`00ec1000 0x0000f000 0x4a5bc11a 14/07/2009 00:19:54 sptd.sys fffff880`00ec1000 fffff880`00fe7000 0x00126000 0x4ad24632 11/10/2009 21:55:14 WMILIB.SYS fffff880`00fe7000 fffff880`00ff0000 0x00009000 0x4a5bc117 14/07/2009 00:19:51 SCSIPORT.SYS fffff880`00d9c000 fffff880`00dcb000 0x0002f000 0x4a5bcac0 14/07/2009 01:01:04 ACPI.sys fffff880`01021000 fffff880`01078000 0x00057000 0x4a5bc106 14/07/2009 00:19:34 msisadrv.sys fffff880`01078000 fffff880`01082000 0x0000a000 0x4a5bc0fe 14/07/2009 00:19:26 vdrvroot.sys fffff880`01082000 fffff880`0108f000 0x0000d000 0x4a5bcadb 14/07/2009 01:01:31 partmgr.sys fffff880`010c2000 fffff880`010d7000 0x00015000 0x4a5bc11e 14/07/2009 00:19:58 volmgr.sys fffff880`010d7000 fffff880`010ec000 0x00015000 0x4a5bc11d 14/07/2009 00:19:57 volmgrx.sys fffff880`010ec000 fffff880`01148000 0x0005c000 0x4a5bc141 14/07/2009 00:20:33 pciide.sys fffff880`01148000 fffff880`0114f000 0x00007000 0x4a5bc115 14/07/2009 00:19:49 PCIIDEX.SYS fffff880`0114f000 fffff880`0115f000 0x00010000 0x4a5bc114 14/07/2009 00:19:48 mountmgr.sys fffff880`0115f000 fffff880`01179000 0x0001a000 0x4a5bc11a 14/07/2009 00:19:54 atapi.sys fffff880`01179000 fffff880`01182000 0x00009000 0x4a5bc113 14/07/2009 00:19:47 ataport.SYS fffff880`01182000 fffff880`011ac000 0x0002a000 0x4a5bc118 14/07/2009 00:19:52 msahci.sys fffff880`011ac000 fffff880`011b7000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 amdxata.sys fffff880`011b7000 fffff880`011c2000 0x0000b000 0x4ba3a3ca 19/03/2010 17:18:18 fltmgr.sys fffff880`01211000 fffff880`0125d000 0x0004c000 0x4a5bc11f 14/07/2009 00:19:59 fileinfo.sys fffff880`0125d000 fffff880`01271000 0x00014000 0x4a5bc481 14/07/2009 00:34:25 Ntfs.sys fffff880`0145c000 fffff880`015fe000 0x001a2000 0x4d79996d 11/03/2011 04:39:25 msrpc.sys fffff880`01271000 fffff880`012cf000 0x0005e000 0x4a5bc17c 14/07/2009 00:21:32 ksecdd.sys fffff880`01400000 fffff880`0141a000 0x0001a000 0x4ec48579 17/11/2011 04:54:33 cng.sys fffff880`012cf000 fffff880`01342000 0x00073000 0x4ec48cfb 17/11/2011 05:26:35 pcw.sys fffff880`0141a000 fffff880`0142b000 0x00011000 0x4a5bc0ff 14/07/2009 00:19:27 Fs_Rec.sys fffff880`0142b000 fffff880`01435000 0x0000a000 0x4a5bc111 14/07/2009 00:19:45 ndis.sys fffff880`01653000 fffff880`01745000 0x000f2000 0x4a5bc184 14/07/2009 00:21:40 NETIO.SYS fffff880`01745000 fffff880`017a5000 0x00060000 0x4bbe946f 09/04/2010 03:43:59 ksecpkg.sys fffff880`017a5000 fffff880`017d0000 0x0002b000 0x4ec48d32 17/11/2011 05:27:30 tcpip.sys fffff880`01802000 fffff880`01a00000 0x001fe000 0x4e83eb7f 29/09/2011 04:52:31 fwpkclnt.sys fffff880`01600000 fffff880`0164a000 0x0004a000 0x4a5bc164 14/07/2009 00:21:08 vmstorfl.sys fffff880`017d0000 fffff880`017e0000 0x00010000 0x4a5bc67e 14/07/2009 00:42:54 volsnap.sys fffff880`01342000 fffff880`0138e000 0x0004c000 0x4a5bc128 14/07/2009 00:20:08 spldr.sys fffff880`017e0000 fffff880`017e8000 0x00008000 0x4a0858bb 11/05/2009 17:56:27 rdyboost.sys fffff880`0138e000 fffff880`013c8000 0x0003a000 0x4a5bc48a 14/07/2009 00:34:34 mup.sys fffff880`017e8000 fffff880`017fa000 0x00012000 0x4a5bc201 14/07/2009 00:23:45 hwpolicy.sys fffff880`0164a000 fffff880`01653000 0x00009000 0x4a5bc0fa 14/07/2009 00:19:22 fvevol.sys fffff880`011c2000 fffff880`011fc000 0x0003a000 0x4abd7db2 26/09/2009 03:34:26 disk.sys fffff880`01435000 fffff880`0144b000 0x00016000 0x4a5bc11d 14/07/2009 00:19:57 CLASSPNP.SYS fffff880`013c8000 fffff880`013f8000 0x00030000 0x4a5bc11e 14/07/2009 00:19:58 cdrom.sys fffff880`00dcb000 fffff880`00df5000 0x0002a000 0x4a5bc11a 14/07/2009 00:19:54 MpFilter.sys fffff880`02c1a000 fffff880`02c4b000 0x00031000 0x4d9cc801 06/04/2011 21:07:29 Null.SYS fffff880`02c4b000 fffff880`02c54000 0x00009000 0x4a5bc109 14/07/2009 00:19:37 Beep.SYS fffff880`02c54000 fffff880`02c5b000 0x00007000 0x4a5bca8d 14/07/2009 01:00:13 vga.sys fffff880`02c5b000 fffff880`02c69000 0x0000e000 0x4a5bc587 14/07/2009 00:38:47 VIDEOPRT.SYS fffff880`02c69000 fffff880`02c8e000 0x00025000 0x4a5bc58b 14/07/2009 00:38:51 watchdog.sys fffff880`02c8e000 fffff880`02c9e000 0x00010000 0x4a5bc53f 14/07/2009 00:37:35 RDPCDD.sys fffff880`02c9e000 fffff880`02ca7000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdpencdd.sys fffff880`02ca7000 fffff880`02cb0000 0x00009000 0x4a5bce62 14/07/2009 01:16:34 rdprefmp.sys fffff880`02cb0000 fffff880`02cb9000 0x00009000 0x4a5bce63 14/07/2009 01:16:35 Msfs.SYS fffff880`02cb9000 fffff880`02cc4000 0x0000b000 0x4a5bc113 14/07/2009 00:19:47 Npfs.SYS fffff880`02cc4000 fffff880`02cd5000 0x00011000 0x4a5bc114 14/07/2009 00:19:48 tdx.sys fffff880`02cd5000 fffff880`02cf3000 0x0001e000 0x4a5bc16b 14/07/2009 00:21:15 TDI.SYS fffff880`02cf3000 fffff880`02d00000 0x0000d000 0x4a5bc16e 14/07/2009 00:21:18 afd.sys fffff880`02d00000 fffff880`02d89000 0x00089000 0x4efa940c 28/12/2011 04:59:08 netbt.sys fffff880`02d89000 fffff880`02dce000 0x00045000 0x4a5bc178 14/07/2009 00:21:28 ws2ifsl.sys fffff880`02dce000 fffff880`02dd9000 0x0000b000 0x4a5bccf9 14/07/2009 01:10:33 wfplwf.sys fffff880`02dd9000 fffff880`02de2000 0x00009000 0x4a5bccb6 14/07/2009 01:09:26 pacer.sys fffff880`00c00000 fffff880`00c26000 0x00026000 0x4a5bccc5 14/07/2009 01:09:41 vpcnfltr.sys fffff880`02de2000 fffff880`02df6000 0x00014000 0x4ab97aae 23/09/2009 02:32:30 netbios.sys fffff880`02c00000 fffff880`02c0f000 0x0000f000 0x4a5bccb6 14/07/2009 01:09:26 serial.sys fffff880`04075000 fffff880`04092000 0x0001d000 0x4a5bcaa8 14/07/2009 01:00:40 wanarp.sys fffff880`04092000 fffff880`040ad000 0x0001b000 0x4a5bcced 14/07/2009 01:10:21 vpcvmm.sys fffff880`040ad000 fffff880`04103180 0x00056180 0x4ab97ab6 23/09/2009 02:32:38 termdd.sys fffff880`04104000 fffff880`04118000 0x00014000 0x4a5bce64 14/07/2009 01:16:36 rdbss.sys fffff880`04118000 fffff880`04169000 0x00051000 0x4a5bc219 14/07/2009 00:24:09 nsiproxy.sys fffff880`04169000 fffff880`04175000 0x0000c000 0x4a5bc15e 14/07/2009 00:21:02 mssmbios.sys fffff880`04175000 fffff880`04180000 0x0000b000 0x4a5bc3be 14/07/2009 00:31:10 discache.sys fffff880`04180000 fffff880`0418f000 0x0000f000 0x4a5bc52e 14/07/2009 00:37:18 csc.sys fffff880`04280000 fffff880`04303000 0x00083000 0x4a5bc22a 14/07/2009 00:24:26 dfsc.sys fffff880`04303000 fffff880`04321000 0x0001e000 0x4db78623 27/04/2011 03:57:39 blbdrive.sys fffff880`04321000 fffff880`04332000 0x00011000 0x4a5bc4df 14/07/2009 00:35:59 tunnel.sys fffff880`04332000 fffff880`04358000 0x00026000 0x4a5bccc1 14/07/2009 01:09:37 intelppm.sys fffff880`04358000 fffff880`0436e000 0x00016000 0x4a5bc0fd 14/07/2009 00:19:25 nvlddmkm.sys fffff880`0fe34000 fffff880`10b52000 0x00d1e000 0x4f4e68c4 29/02/2012 19:04:52 nvBridge.kmd fffff880`10b52000 fffff880`10b53180 0x00001180 0x4d27c482 08/01/2011 02:57:22 dxgkrnl.sys fffff880`04450000 fffff880`04544000 0x000f4000 0x4d3fa1a0 26/01/2011 05:22:56 dxgmms1.sys fffff880`04544000 fffff880`0458a000 0x00046000 0x4d3fa174 26/01/2011 05:22:12 usbuhci.sys fffff880`0458a000 fffff880`04597000 0x0000d000 0x4d8c0a8f 25/03/2011 04:22:55 USBPORT.SYS fffff880`04597000 fffff880`045ed000 0x00056000 0x4d8c0a97 25/03/2011 04:23:03 usbehci.sys fffff880`045ed000 fffff880`045fe000 0x00011000 0x4d8c0a91 25/03/2011 04:22:57 HDAudBus.sys fffff880`04400000 fffff880`04424000 0x00024000 0x4a5bcbf5 14/07/2009 01:06:13 1394ohci.sys fffff880`10b54000 fffff880`10b92000 0x0003e000 0x4a5bcc30 14/07/2009 01:07:12 Rt64win7.sys fffff880`10b92000 fffff880`10bc4000 0x00032000 0x49a65b0d 26/02/2009 10:04:13 i8042prt.sys fffff880`04424000 fffff880`04442000 0x0001e000 0x4a5bc11d 14/07/2009 00:19:57 kbdclass.sys fffff880`10bc4000 fffff880`10bd3000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 VMkbd.sys fffff880`04442000 fffff880`0444d000 0x0000b000 0x4b5a836f 23/01/2010 06:04:47 serenum.sys fffff880`10bd3000 fffff880`10bdf000 0x0000c000 0x4a5bcaa1 14/07/2009 01:00:33 av1shsvl.SYS fffff880`0436e000 fffff880`043b3000 0x00045000 0x4a5cf4d7 14/07/2009 22:12:55 wmiacpi.sys fffff880`10bdf000 fffff880`10be8000 0x00009000 0x4a5bc3b6 14/07/2009 00:31:02 CompositeBus.sys fffff880`10be8000 fffff880`10bf8000 0x00010000 0x4a5bcaa1 14/07/2009 01:00:33 AgileVpn.sys fffff880`0fe00000 fffff880`0fe16000 0x00016000 0x4a5bccf0 14/07/2009 01:10:24 rasl2tp.sys fffff880`043b3000 fffff880`043d7000 0x00024000 0x4a5bcce3 14/07/2009 01:10:11 ndistapi.sys fffff880`0fe16000 fffff880`0fe22000 0x0000c000 0x4a5bccd8 14/07/2009 01:10:00 ndiswan.sys fffff880`04200000 fffff880`0422f000 0x0002f000 0x4a5bcce3 14/07/2009 01:10:11 raspppoe.sys fffff880`0422f000 fffff880`0424a000 0x0001b000 0x4a5bcce9 14/07/2009 01:10:17 raspptp.sys fffff880`0424a000 fffff880`0426b000 0x00021000 0x4a5bccea 14/07/2009 01:10:18 rassstp.sys fffff880`043d7000 fffff880`043f1000 0x0001a000 0x4a5bccf1 14/07/2009 01:10:25 tapoas.sys fffff880`0fe22000 fffff880`0fe2f000 0x0000d000 0x4c3a627f 12/07/2010 01:31:59 tap0901.sys fffff880`043f1000 fffff880`043fe000 0x0000d000 0x4b22da33 12/12/2009 00:48:03 rdpbus.sys fffff880`0426b000 fffff880`04276000 0x0000b000 0x4a5bceaa 14/07/2009 01:17:46 mouclass.sys fffff880`0418f000 fffff880`0419e000 0x0000f000 0x4a5bc116 14/07/2009 00:19:50 swenum.sys fffff880`0444d000 fffff880`0444e480 0x00001480 0x4a5bca92 14/07/2009 01:00:18 ks.sys fffff880`0419e000 fffff880`041e1000 0x00043000 0x4b8f37d9 04/03/2010 05:32:25 umbus.sys fffff880`041e1000 fffff880`041f3000 0x00012000 0x4a5bcc20 14/07/2009 01:06:56 vpcusb.sys fffff880`04000000 fffff880`0401d000 0x0001d000 0x4ab97ab7 23/09/2009 02:32:39 usbrpm.sys fffff880`0401d000 fffff880`0402c000 0x0000f000 0x4a5bd2c2 14/07/2009 01:35:14 USBD.SYS fffff880`045fe000 fffff880`045fff00 0x00001f00 0x4d8c0a8b 25/03/2011 04:22:51 vmnetadapter.sys fffff880`10bf8000 fffff880`10c00000 0x00008000 0x4a800ce5 10/08/2009 13:04:53 VMNET.SYS fffff880`04276000 fffff880`04280000 0x0000a000 0x4a800ce2 10/08/2009 13:04:50 vpchbus.sys fffff880`0402c000 fffff880`04068000 0x0003c000 0x4ab97ab0 23/09/2009 02:32:32 usbhub.sys fffff880`04c26000 fffff880`04c80000 0x0005a000 0x4d8c0aaa 25/03/2011 04:23:22 NDProxy.SYS fffff880`04c80000 fffff880`04c95000 0x00015000 0x4a5bccdd 14/07/2009 01:10:05 HdAudio.sys fffff880`04c95000 fffff880`04cf1000 0x0005c000 0x4a5bcc23 14/07/2009 01:06:59 portcls.sys fffff880`04cf1000 fffff880`04d2e000 0x0003d000 0x4a5bcc03 14/07/2009 01:06:27 drmk.sys fffff880`04d2e000 fffff880`04d50000 0x00022000 0x4a5bd8e5 14/07/2009 02:01:25 ksthunk.sys fffff880`04d50000 fffff880`04d55200 0x00005200 0x4a5bca93 14/07/2009 01:00:19 win32k.sys fffff960`000c0000 fffff960`003d4000 0x00314000 0x00000000 Dxapi.sys fffff880`04d56000 fffff880`04d62000 0x0000c000 0x4a5bc574 14/07/2009 00:38:28 udfs.sys fffff880`04d62000 fffff880`04db6000 0x00054000 0x4a5bc1f9 14/07/2009 00:23:37 monitor.sys fffff880`04db6000 fffff880`04dc4000 0x0000e000 0x4a5bc58c 14/07/2009 00:38:52 TSDDD.dll fffff960`004c0000 fffff960`004ca000 0x0000a000 0x00000000 hidusb.sys fffff880`04dc4000 fffff880`04dd2000 0x0000e000 0x4a5bcbfe 14/07/2009 01:06:22 HIDCLASS.SYS fffff880`04dd2000 fffff880`04deb000 0x00019000 0x4a5bcbfd 14/07/2009 01:06:21 HIDPARSE.SYS fffff880`04deb000 fffff880`04df3080 0x00008080 0x4a5bcbf9 14/07/2009 01:06:17 cdd.dll fffff960`00660000 fffff960`00687000 0x00027000 0x00000000 mouhid.sys fffff880`04c00000 fffff880`04c0d000 0x0000d000 0x4a5bca94 14/07/2009 01:00:20 luafv.sys fffff880`05a78000 fffff880`05a9b000 0x00023000 0x4a5bc295 14/07/2009 00:26:13 WudfPf.sys fffff880`05a9b000 fffff880`05abc000 0x00021000 0x4a5bcbd1 14/07/2009 01:05:37 crashdmp.sys fffff880`05abc000 fffff880`05aca000 0x0000e000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpata.sys fffff880`05aca000 fffff880`05ad6000 0x0000c000 0x4a5bc113 14/07/2009 00:19:47 dump_msahci.sys fffff880`05ad6000 fffff880`05ae1000 0x0000b000 0x4a5bcabd 14/07/2009 01:01:01 dump_dumpfve.sys fffff880`05ae1000 fffff880`05af4000 0x00013000 0x4a5bc18f 14/07/2009 00:21:51 vmnetbridge.sys fffff880`05af4000 fffff880`05b04000 0x00010000 0x4a800d26 10/08/2009 13:05:58 lltdio.sys fffff880`05b04000 fffff880`05b19000 0x00015000 0x4a5bcc92 14/07/2009 01:08:50 rspndr.sys fffff880`05b19000 fffff880`05b31000 0x00018000 0x4a5bcc92 14/07/2009 01:08:50 HTTP.sys fffff880`05b31000 fffff880`05bf9000 0x000c8000 0x4a5bc1a8 14/07/2009 00:22:16 bowser.sys fffff880`05a00000 fffff880`05a1e000 0x0001e000 0x4d6497da 23/02/2011 06:15:06 mpsdrv.sys fffff880`05a1e000 fffff880`05a36000 0x00018000 0x4a5bcc79 14/07/2009 01:08:25 mrxsmb.sys fffff880`05a36000 fffff880`05a63000 0x0002d000 0x4dc0bf1a 04/05/2011 03:51:06 mrxsmb10.sys fffff880`066ce000 fffff880`0671c000 0x0004e000 0x4e17c0a7 09/07/2011 03:44:55 mrxsmb20.sys fffff880`0671c000 fffff880`0673f000 0x00023000 0x4dc0bf19 04/05/2011 03:51:05 hcmon.sys fffff880`0673f000 fffff880`0674b000 0x0000c000 0x4b5a765b 23/01/2010 05:08:59 vmci.sys fffff880`0674b000 fffff880`06763000 0x00018000 0x4b5a6e03 23/01/2010 04:33:23 vmx86.sys fffff880`06896000 fffff880`0696c000 0x000d6000 0x4b5a8e0d 23/01/2010 06:50:05 MpNWMon.sys fffff880`0696c000 fffff880`0697c000 0x00010000 0x4d9cc7fb 06/04/2011 21:07:23 peauth.sys fffff880`06600000 fffff880`066a6000 0x000a6000 0x4a5bd8df 14/07/2009 02:01:19 secdrv.SYS fffff880`0697c000 fffff880`06987000 0x0000b000 0x4508052e 13/09/2006 14:18:38 srvnet.sys fffff880`06987000 fffff880`069b4000 0x0002d000 0x4dba2ca3 29/04/2011 04:12:35 tcpipreg.sys fffff880`069b4000 fffff880`069c6000 0x00012000 0x4a5bcccd 14/07/2009 01:09:49 vmnetuserif.sys fffff880`069c6000 fffff880`069d0000 0x0000a000 0x4b5a7a6b 23/01/2010 05:26:19 vstor2-mntapi10.sys fffff880`069d0000 fffff880`069dc000 0x0000c000 0x49e94462 18/04/2009 04:09:22 vstor2-ws60.sys fffff880`069dc000 fffff880`069e8000 0x0000c000 0x4ad39a52 12/10/2009 22:06:26 srv2.sys fffff880`06800000 fffff880`06867000 0x00067000 0x4dba2cb3 29/04/2011 04:12:51 srv.sys fffff880`06763000 fffff880`067f8000 0x00095000 0x4dba2cc1 29/04/2011 04:13:05 NisDrvWFP.sys fffff880`06867000 fffff880`0687f000 0x00018000 0x4d9cc855 06/04/2011 21:08:53 WinRing0x64.sys fffff880`0687f000 fffff880`06886000 0x00007000 0x488b26c1 26/07/2008 14:29:37 asyncmac.sys fffff880`0aa8f000 fffff880`0aa9a000 0x0000b000 0x4a5bcce5 14/07/2009 01:10:13 nvoclk64.sys fffff880`0aa9a000 fffff880`0aaaa000 0x00010000 0x4ab00e3d 15/09/2009 22:59:25 I'd apreciate any help because I'm well outside of my comfort zone.

  Read the article

• UAC being turned off once a day on Windows 7

  - by Mehper C. Palavuzlar

  I have strange problem on my HP laptop. This began to happen recently. Whenever I start my machine, Windows 7 Action Center displays the following warning: You need to restart your computer for UAC to be turned off. Actually, this does not happen if it happened once on a specific day. For example, when I start the machine in the morning, it shows up; but it never shows up in the subsequent restarts within that day. On the next day, the same thing happens again. I never disable UAC, but obviously some rootkit or virus causes this. As soon as I get this warning, I head for the UAC settings, and re-enable UAC to dismiss this warning. This is a bothersome situation as I can't fix it. First, I have run a full scan on the computer for any probable virus and malware/rootkit activity, but TrendMicro OfficeScan said that no viruses have been found. I went to an old Restore Point using Windows System Restore, but the problem was not solved. What I have tried so far (which couldn't find the rootkit): TrendMicro OfficeScan Antivirus AVAST Malwarebytes' Anti-malware Ad-Aware Vipre Antivirus GMER TDSSKiller (Kaspersky Labs) HiJackThis RegRuns UnHackMe SuperAntiSpyware Portable Tizer Rootkit Razor (*) Sophos Anti-Rootkit SpyHunter 4 There are no other strange activities on the machine. Everything works fine except this bizarre incident. What could be the name of this annoying rootkit? How can I detect and remove it? EDIT: Below is the log file generated by HijackThis: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 13:07:04, on 17.01.2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Windows\system32\taskhost.exe C:\Windows\system32\Dwm.exe C:\Windows\Explorer.EXE C:\Program Files\CheckPoint\SecuRemote\bin\SR_GUI.Exe C:\Windows\System32\igfxtray.exe C:\Windows\System32\hkcmd.exe C:\Windows\system32\igfxsrvc.exe C:\Windows\System32\igfxpers.exe C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe C:\Program Files\Synaptics\SynTP\SynTPEnh.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe C:\Program Files\Analog Devices\Core\smax4pnp.exe C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\VolCtrl.exe C:\Program Files\LightningFAX\LFclient\lfsndmng.exe C:\Program Files\Common Files\Java\Java Update\jusched.exe C:\Program Files\Microsoft Office Communicator\communicator.exe C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe C:\Program Files\Trend Micro\OfficeScan Client\PccNTMon.exe C:\Program Files\Microsoft LifeCam\LifeExp.exe C:\Program Files\Hewlett-Packard\Shared\HpqToaster.exe C:\Program Files\Windows Sidebar\sidebar.exe C:\Program Files\mimio\mimio Studio\system\aps_tablet\atwtusb.exe C:\Program Files\Microsoft Office\Office12\OUTLOOK.EXE C:\Program Files\Babylon\Babylon-Pro\Babylon.exe C:\Program Files\Mozilla Firefox\firefox.exe C:\Users\userx\Desktop\HijackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = about:blank R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,AutoConfigURL = http://www.yaysat.com.tr/proxy/proxy.pac R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Babylon IE plugin - {9CFACCB6-2F3F-4177-94EA-0D2B72D384C1} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [IgfxTray] C:\Windows\system32\igfxtray.exe O4 - HKLM\..\Run: [HotKeysCmds] C:\Windows\system32\hkcmd.exe O4 - HKLM\..\Run: [Persistence] C:\Windows\system32\igfxpers.exe O4 - HKLM\..\Run: [hpWirelessAssistant] C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe O4 - HKLM\..\Run: [QlbCtrl.exe] C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QlbCtrl.exe /Start O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [lfsndmng] C:\Program Files\LightningFAX\LFclient\LFSNDMNG.EXE O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\Run: [Communicator] "C:\Program Files\Microsoft Office Communicator\communicator.exe" /fromrunkey O4 - HKLM\..\Run: [AgentUiRunKey] "C:\Program Files\Iron Mountain\Connected BackupPC\Agent.exe" -ni -sss -e http://localhost:16386/ O4 - HKLM\..\Run: [OfficeScanNT Monitor] "C:\Program Files\Trend Micro\OfficeScan Client\pccntmon.exe" -HideWindow O4 - HKLM\..\Run: [Babylon Client] C:\Program Files\Babylon\Babylon-Pro\Babylon.exe -AutoStart O4 - HKLM\..\Run: [LifeCam] "C:\Program Files\Microsoft LifeCam\LifeExp.exe" O4 - HKCU\..\Run: [Sidebar] C:\Program Files\Windows Sidebar\sidebar.exe /autoRun O4 - Global Startup: mimio Studio.lnk = C:\Program Files\mimio\mimio Studio\mimiosys.exe O8 - Extra context menu item: Microsoft Excel'e &Ver - res://C:\PROGRA~1\MICROS~1\Office12\EXCEL.EXE/3000 O8 - Extra context menu item: Translate this web page with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/ActionTU.htm O8 - Extra context menu item: Translate with Babylon - res://C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll/Action.htm O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~1\Office12\REFIEBAR.DLL O9 - Extra button: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O9 - Extra 'Tools' menuitem: Translate this web page with Babylon - {F72841F0-4EF1-4df5-BCE5-B3AC8ACF5478} - C:\Program Files\Babylon\Babylon-Pro\Utils\BabylonIEPI.dll O16 - DPF: {00134F72-5284-44F7-95A8-52A619F70751} (ObjWinNTCheck Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/WinNTChk.cab O16 - DPF: {08D75BC1-D2B5-11D1-88FC-0080C859833B} (OfficeScan Corp Edition Web-Deployment SetupCtrl Class) - https://172.20.12.103:4343/officescan/console/html/ClientInstall/setup.cab O17 - HKLM\System\CCS\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\Software\..\Telephony: DomainName = yaysat.com O17 - HKLM\System\CS1\Services\Tcpip\Parameters: Domain = yaysat.com O17 - HKLM\System\CS2\Services\Tcpip\Parameters: Domain = yaysat.com O18 - Protocol: qcom - {B8DBD265-42C3-43E6-B439-E968C71984C6} - C:\Program Files\Common Files\Quest Shared\CodeXpert\qcom.dll O22 - SharedTaskScheduler: FencesShellExt - {1984DD45-52CF-49cd-AB77-18F378FEA264} - C:\Program Files\Stardock\Fences\FencesMenu.dll O23 - Service: Andrea ADI Filters Service (AEADIFilters) - Andrea Electronics Corporation - C:\Windows\system32\AEADISRV.EXE O23 - Service: AgentService - Iron Mountain Incorporated - C:\Program Files\Iron Mountain\Connected BackupPC\AgentService.exe O23 - Service: Agere Modem Call Progress Audio (AgereModemAudio) - LSI Corporation - C:\Program Files\LSI SoftModem\agrsmsvc.exe O23 - Service: BMFMySQL - Unknown owner - C:\Program Files\Quest Software\Benchmark Factory for Databases\Repository\MySQL\bin\mysqld-max-nt.exe O23 - Service: Com4QLBEx - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\Com4QLBEx.exe O23 - Service: hpqwmiex - Hewlett-Packard Development Company, L.P. - C:\Program Files\Hewlett-Packard\Shared\hpqwmiex.exe O23 - Service: OfficeScanNT RealTime Scan (ntrtscan) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\ntrtscan.exe O23 - Service: SMS Task Sequence Agent (smstsmgr) - Unknown owner - C:\Windows\system32\CCM\TSManager.exe O23 - Service: Check Point VPN-1 Securemote service (SR_Service) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Service.exe O23 - Service: Check Point VPN-1 Securemote watchdog (SR_Watchdog) - Check Point Software Technologies - C:\Program Files\CheckPoint\SecuRemote\bin\SR_Watchdog.exe O23 - Service: Trend Micro Unauthorized Change Prevention Service (TMBMServer) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\..\BM\TMBMSRV.exe O23 - Service: OfficeScan NT Listener (tmlisten) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\tmlisten.exe O23 - Service: OfficeScan NT Proxy Service (TmProxy) - Trend Micro Inc. - C:\Program Files\Trend Micro\OfficeScan Client\TmProxy.exe O23 - Service: VNC Server Version 4 (WinVNC4) - RealVNC Ltd. - C:\Program Files\RealVNC\VNC4\WinVNC4.exe -- End of file - 8204 bytes As suggested in this very similar question, I have run full scans (+boot time scans) with RegRun and UnHackMe, but they also did not find anything. I have carefully examined all entries in the Event Viewer, but there's nothing wrong. Now I know that there is a hidden trojan (rootkit) on my machine which seems to disguise itself quite successfully. Note that I don't have the chance to remove the HDD, or reinstall the OS as this is a work machine subjected to certain IT policies on a company domain. Despite all my attempts, the problem still remains. I strictly need a to-the-point method or a pukka rootkit remover to remove whatever it is. I don't want to monkey with the system settings, i.e. disabling auto runs one by one, messing the registry, etc. EDIT 2: I have found an article which is closely related to my trouble: Malware can turn off UAC in Windows 7; “By design” says Microsoft. Special thanks(!) to Microsoft. In the article, a VBScript code is given to disable UAC automatically: '// 1337H4x Written by _____________ '// (12 year old) Set WshShell = WScript.CreateObject("WScript.Shell") '// Toggle Start menu WshShell.SendKeys("^{ESC}") WScript.Sleep(500) '// Search for UAC applet WshShell.SendKeys("change uac") WScript.Sleep(2000) '// Open the applet (assuming second result) WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{ENTER}") WScript.Sleep(2000) '// Set UAC level to lowest (assuming out-of-box Default setting) WshShell.SendKeys("{TAB}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") WshShell.SendKeys("{DOWN}") '// Save our changes WshShell.SendKeys("{TAB}") WshShell.SendKeys("{ENTER}") '// TODO: Add code to handle installation of rebound '// process to continue exploitation, i.e. place something '// evil in Startup folder '// Reboot the system '// WshShell.Run "shutdown /r /f" Unfortunately, that doesn't tell me how I can get rid of this malicious code running on my system. EDIT 3: Last night, I left the laptop open because of a running SQL task. When I came in the morning, I saw that UAC was turned off. So, I suspect that the problem is not related to startup. It is happening once a day for sure no matter if the machine is rebooted.

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• Rails with Oracle often got "no listener" error

  - by qichunren

  I am on Rails 2.3.5 and use oracle 10 as my database,use oracle_adapter ,ruby-oci8 to connect oracle host. But I often got exception as the log info show: Completed in 463ms (View: 18, DB: 166) | 200 OK [http://192.168.30.128/auctions?page=1] /!\ FAILSAFE /!\ Mon Feb 01 19:02:11 +0800 2010 Status: 500 Internal Server Error ORA-12541: TNS:no listener env.c:257:in oci8lib.so /home/qichunren/.gem/ruby/1.8/gems/ruby-oci8-1.0.7/lib/oci8.rb:229:in `initialize' /home/qichunren/.gem/ruby/1.8/gems/activerecord-oracle-adapter-1.0.0.9250/lib/active_record/connection_adapters/oracle_adapter.rb:623:in `new' /home/qichunren/.gem/ruby/1.8/gems/activerecord-oracle-adapter-1.0.0.9250/lib/active_record/connection_adapters/oracle_adapter.rb:623:in `new_connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-oracle-adapter-1.0.0.9250/lib/active_record/connection_adapters/oracle_adapter.rb:659:in `initialize' /home/qichunren/.gem/ruby/1.8/gems/activerecord-oracle-adapter-1.0.0.9250/lib/active_record/connection_adapters/oracle_adapter.rb:35:in `new' /home/qichunren/.gem/ruby/1.8/gems/activerecord-oracle-adapter-1.0.0.9250/lib/active_record/connection_adapters/oracle_adapter.rb:35:in `oracle_connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:223:in `send' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:223:in `new_connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:245:in `checkout_new_connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:188:in `checkout' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:184:in `loop' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:184:in `checkout' /usr/local/ruby187/lib/ruby/1.8/monitor.rb:242:in `synchronize' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:183:in `checkout' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:98:in `connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:326:in `retrieve_connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:123:in `retrieve_connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_specification.rb:115:in `connection' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:9:in `cache' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/query_cache.rb:28:in `call' /home/qichunren/.gem/ruby/1.8/gems/activerecord-2.3.5/lib/active_record/connection_adapters/abstract/connection_pool.rb:361:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/string_coercion.rb:25:in `call' /home/qichunren/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/head.rb:9:in `call' /home/qichunren/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/methodoverride.rb:24:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/params_parser.rb:15:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/session/cookie_store.rb:93:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/failsafe.rb:26:in `call' /home/qichunren/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /home/qichunren/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `synchronize' /home/qichunren/.gem/ruby/1.8/gems/rack-1.0.1/lib/rack/lock.rb:11:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:114:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/reloader.rb:34:in `run' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:108:in `call' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/cgi_process.rb:44:in `dispatch_cgi' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:101:in `dispatch_cgi' /home/qichunren/.gem/ruby/1.8/gems/actionpack-2.3.5/lib/action_controller/dispatcher.rb:27:in `dispatch' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/rails.rb:76:in `process' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/rails.rb:74:in `synchronize' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/rails.rb:74:in `process' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:159:in `process_client' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:158:in `each' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:158:in `process_client' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:285:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:285:in `initialize' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:285:in `new' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:285:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:268:in `initialize' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:268:in `new' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel.rb:268:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:282:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:281:in `each' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/configurator.rb:281:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/mongrel_rails:128:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/../lib/mongrel/command.rb:212:in `run' /home/qichunren/.gem/ruby/1.8/gems/mongrel-1.1.5/bin/mongrel_rails:281 /home/qichunren/.gem/ruby/1.8/bin/mongrel_rails:19:in `load' /home/qichunren/.gem/ruby/1.8/bin/mongrel_rails:19 it seems that connection to oracle often disconnect.it show oracle error:ORA-12541: TNS:no listener How to fix this ? Many tks. oci8.c:270:in oci8lib.so: ORA-12541: TNS:no listener (OCIError) from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_oci_connection.rb:223:in new' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_oci_connection.rb:223:innew_connection' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_oci_connection.rb:328:in initialize' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_oci_connection.rb:24:innew' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_oci_connection.rb:24:in initialize' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_connection.rb:9:innew' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_connection.rb:9:in create' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-oracle_enhanced-adapter-1.2.4/lib/active_record/connec tion_adapters/oracle_enhanced_adapter.rb:50:inoracle_enhanced_connection' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/connection_adapters/abstract/c onnection_specification.rb:291:in send' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/connection_adapters/abstract/c onnection_specification.rb:291:inconnection=' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/connection_adapters/abstract/c onnection_specification.rb:259:in retrieve_connection' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/connection_adapters/abstract/c onnection_specification.rb:78:inconnection' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/base.rb:2438:in quoted_table_ name' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/base.rb:1259:infind_one' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/base.rb:1250:in find_from_ids ' from /opt/ruby-enterprise-1.8.7/lib/ruby/gems/1.8/gems/activerecord-2.0.2/lib/active_record/base.rb:504:infind' from script/maintenance/adjust_settlement.rb:19

  Read the article

• Android Remote Service Keeps Restarting

  - by user244190

  Ok so I've built an app that uses a remote service to do some real time GPS tracking. I am using the below code to start and bind to the service. The remote service uses aidl, sets up a notification icon, runs the GPS and locationListener. In onLocationChanged, a handler sends data back to the caller via the callback. Pretty much straight out of the examples and resources online. I want to allow the service to continue running even if the app closes. When the app is restarted, I want the app to again bind to the service (using the existing service if running) and again receive data from the tracker. I currently have the app mode set to singleTask and cannot use singleinstance due to another issue. My problem is that quit often even after the app and service are shut down either from the app itself, or from AdvancedTaskKiller, or a Forceclose, the service will restart and initialize the GPS. touching on the notification will open the app. I again stop the tracking which removes the notification and turns off the GPS Close the app, and again after a few seconds the service restarts. The only way to stop it is to power off the phone. What can I do to stop this from happening. Does it have to do with the mode of operation? START_NOT_STICKY or START_REDELIVER_INTENT? Or do I need to use stopSelf()? My understanding is that if the service is not running when I use bindService() that the service will be created...so do I really need to use start/stopService also? I thought I would need to use it if I want the service to run even after the app is closed. That is why i do not unbind/stop the service in onDestroy(). Is this correct? I've not seen any other info an this, so I,m not sure where to look. Please Help! Thanks Patrick //Remote Service Startup try{ startService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } } try{ bindService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } //Remote service shutdown try { unbindService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } try{ stopService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } private void startService() { if( myAdapter.trackServiceStarted() ) { if(SETTING_DEBUG_MODE) Toast.makeText(this, "Service already started", Toast.LENGTH_SHORT).show(); started = true; if(!myAdapter.trackDataExists()) insertTrackData(); updateServiceStatus(); } else { startService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "startService()", "startService()" ); started = true; updateServiceStatus(); } } private void stopService() { stopService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "stopService()", "stopService()" ); started = false; updateServiceStatus(); } private void bindService() { bindService(new Intent(ITrackingService.class.getName()), mConnection, Context.BIND_AUTO_CREATE); bindService(new Intent(ITrackingSecondary.class.getName()), mTrackingSecondaryConnection, Context.BIND_AUTO_CREATE); started = true; } private void unbindService() { try { mTrackingService.unregisterCallback(mCallback); } catch (RemoteException e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } try { unbindService(mTrackingSecondaryConnection); unbindService(mConnection); } catch (Exception e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } started = false; } private ServiceConnection mConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // This is called when the connection with the service has been // established, giving us the service object we can use to // interact with the service. We are communicating with our // service through an IDL interface, so get a client-side // representation of that from the raw service object. mTrackingService = ITrackingService.Stub.asInterface(service); // We want to monitor the service for as long as we are // connected to it. try { mTrackingService.registerCallback(mCallback); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { // This is called when the connection with the service has been // unexpectedly disconnected -- that is, its process crashed. mTrackingService = null; } }; private ServiceConnection mTrackingSecondaryConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // Connecting to a secondary interface is the same as any // other interface. mTrackingSecondaryService = ITrackingSecondary.Stub.asInterface(service); try{ mTrackingSecondaryService.setTimePrecision(SETTING_TIME_PRECISION); mTrackingSecondaryService.setDistancePrecision(SETTING_DISTANCE_PRECISION); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { mTrackingSecondaryService = null; } }; //TrackService onDestry() public void onDestroy() { try{ if(lm != null) { lm.removeUpdates(this); } if(mNotificationManager != null) { mNotificationManager.cancel(R.string.local_service_started); } Toast.makeText(this, "Service stopped", Toast.LENGTH_SHORT).show(); }catch (Exception e){ Toast.makeText(this, e.getMessage(), Toast.LENGTH_SHORT).show(); } // Unregister all callbacks. mCallbacks.kill(); // Remove the next pending message to increment the counter, stopping // the increment loop. mHandler.removeMessages(REPORT_MSG); super.onDestroy(); } ServiceConnectionLeaked: I'm seeing a lot of these: 04-21 09:25:23.347: ERROR/ActivityThread(3246): Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): android.app.ServiceConnectionLeaked: Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo$ServiceDispatcher.<init>(ActivityThread.java:977) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo.getServiceDispatcher(ActivityThread.java:872) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ApplicationContext.bindService(ApplicationContext.java:796) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.content.ContextWrapper.bindService(ContextWrapper.java:337) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.bindService(GPSTest.java:2206) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onStartStopClick(GPSTest.java:1589) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onResume(GPSTest.java:1210) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Instrumentation.callActivityOnResume(Instrumentation.java:1149) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Activity.performResume(Activity.java:3763) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.performResumeActivity(ActivityThread.java:2937) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleResumeActivity(ActivityThread.java:2965) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2516) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleRelaunchActivity(ActivityThread.java:3625) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.access$2300(ActivityThread.java:119) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1867) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Handler.dispatchMessage(Handler.java:99) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Looper.loop(Looper.java:123) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.main(ActivityThread.java:4363) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invokeNative(Native Method) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invoke(Method.java:521) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at dalvik.system.NativeStart.main(Native Method) And These: Is this ok, or do I need to make sure i deactivate/close 04-21 09:58:55.487: INFO/dalvikvm(3440): Uncaught exception thrown by finalizer (will be discarded): 04-21 09:58:55.487: INFO/dalvikvm(3440): Ljava/lang/IllegalStateException;: Finalizing cursor android.database.sqlite.SQLiteCursor@447ef258 on gps_data that has not been deactivated or closed 04-21 09:58:55.487: INFO/dalvikvm(3440): at android.database.sqlite.SQLiteCursor.finalize(SQLiteCursor.java:596) 04-21 09:58:55.487: INFO/dalvikvm(3440): at dalvik.system.NativeStart.run(Native Method)

  Read the article

• Regarding playing media file in Android media player application

  - by Mangesh

  Hi. I am new to android development. I just started with creating my own media player application by looking at the code samples given in Android SDK. While I am trying to play a local media file (m.3gp), I am getting IOException error :: error(1,-4). Please can somebody help me in this regard. Here is my code. package com.mediaPlayer; import java.io.IOException; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.media.MediaPlayer; import android.media.MediaPlayer.OnBufferingUpdateListener; import android.media.MediaPlayer.OnCompletionListener; import android.media.MediaPlayer.OnPreparedListener; import android.media.MediaPlayer.OnVideoSizeChangedListener; import android.view.SurfaceHolder; import android.util.Log; public class MediaPlayer1 extends Activity implements OnBufferingUpdateListener, OnCompletionListener,OnPreparedListener, OnVideoSizeChangedListener,SurfaceHolder.Callback { private static final String TAG = "MediaPlayerByMangesh"; // Widgets in the application private Button btnPlay; private Button btnPause; private Button btnStop; private MediaPlayer mMediaPlayer; private String path = "m.3gp"; private SurfaceHolder holder; private int mVideoWidth; private int mVideoHeight; private boolean mIsVideoSizeKnown = false; private boolean mIsVideoReadyToBePlayed = false; // For the id of radio button selected private int radioCheckedId = -1; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { Log.d(TAG, "Entered OnCreate:"); super.onCreate(savedInstanceState); setContentView(R.layout.main); Log.d(TAG, "Creatinging Buttons:"); btnPlay = (Button) findViewById(R.id.btnPlay); btnPause = (Button) findViewById(R.id.btnPause); // On app load, the Pause button is disabled btnPause.setEnabled(false); btnStop = (Button) findViewById(R.id.btnStop); btnStop.setEnabled(false); /* * Attach a OnCheckedChangeListener to the radio group to monitor radio * buttons selected by user */ Log.d(TAG, "Watching for Click"); /* Attach listener to the Calculate and Reset buttons */ btnPlay.setOnClickListener(mClickListener); btnPause.setOnClickListener(mClickListener); btnStop.setOnClickListener(mClickListener); } /* * ClickListener for the Calculate and Reset buttons. Depending on the * button clicked, the corresponding method is called. */ private OnClickListener mClickListener = new OnClickListener() { @Override public void onClick(View v) { switch (v.getId()) { case R.id.btnPlay: Log.d(TAG, "Clicked Play Button"); Log.d(TAG, "Calling Play Function"); Play(); break; case R.id.btnPause: Pause(); break; case R.id.btnStop: Stop(); break; } } }; /** * Play the Video. */ private void Play() { // Create a new media player and set the listeners mMediaPlayer = new MediaPlayer(); Log.d(TAG, "Entered Play function:"); try { mMediaPlayer.setDataSource(path); } catch(IOException ie) { Log.d(TAG, "IO Exception:" + path); } mMediaPlayer.setDisplay(holder); try { mMediaPlayer.prepare(); } catch(IOException ie) { Log.d(TAG, "IO Exception:" + path); } mMediaPlayer.setOnBufferingUpdateListener(this); mMediaPlayer.setOnCompletionListener(this); mMediaPlayer.setOnPreparedListener(this); //mMediaPlayer.setOnVideoSizeChangedListener(this); //mMediaPlayer.setAudioStreamType(AudioManager.STREAM_MUSIC); } public void onBufferingUpdate(MediaPlayer arg0, int percent) { Log.d(TAG, "onBufferingUpdate percent:" + percent); } public void onCompletion(MediaPlayer arg0) { Log.d(TAG, "onCompletion called"); } public void onVideoSizeChanged(MediaPlayer mp, int width, int height) { Log.v(TAG, "onVideoSizeChanged called"); if (width == 0 || height == 0) { Log.e(TAG, "invalid video width(" + width + ") or height(" + height + ")"); return; } mIsVideoSizeKnown = true; mVideoWidth = width; mVideoHeight = height; if (mIsVideoReadyToBePlayed && mIsVideoSizeKnown) { startVideoPlayback(); } } public void onPrepared(MediaPlayer mediaplayer) { Log.d(TAG, "onPrepared called"); mIsVideoReadyToBePlayed = true; if (mIsVideoReadyToBePlayed && mIsVideoSizeKnown) { startVideoPlayback(); } } public void surfaceChanged(SurfaceHolder surfaceholder, int i, int j, int k) { Log.d(TAG, "surfaceChanged called"); } public void surfaceDestroyed(SurfaceHolder surfaceholder) { Log.d(TAG, "surfaceDestroyed called"); } public void surfaceCreated(SurfaceHolder holder) { Log.d(TAG, "surfaceCreated called"); Play(); } private void startVideoPlayback() { Log.v(TAG, "startVideoPlayback"); holder.setFixedSize(176, 144); mMediaPlayer.start(); } /** * Pause the Video */ private void Pause() { ; /* * If all fields are populated with valid values, then proceed to * calculate the tips */ } /** * Stop the Video. */ private void Stop() { ; /* * If all fields are populated with valid values, then proceed to * calculate the tips */ } /** * Shows the error message in an alert dialog * * @param errorMessage * String the error message to show * @param fieldId * the Id of the field which caused the error. This is required * so that the focus can be set on that field once the dialog is * dismissed. */ private void showErrorAlert(String errorMessage, final int fieldId) { new AlertDialog.Builder(this).setTitle("Error") .setMessage(errorMessage).setNeutralButton("Close", new DialogInterface.OnClickListener() { @Override public void onClick(DialogInterface dialog, int which) { findViewById(fieldId).requestFocus(); } }).show(); } } Thanks, Mangesh Kumar K.

  Read the article

• HELP!! Delayed-job: Rake aborted! Can't modify frozen hash

  - by pmneve

  Too bad even the trace doesn't say which hash is involved. Sorry this post is long: am trying to provide enough context to be meaningful. Occurs intermittently when rake jobs:work is pulling a command out of delayed_jobs while my status observer is in the process of parsing a log file for detailed results of the previous delayed_job denizen. I have an observer class (in RAILS_ROOT/lib ) which listens for the events, makes a copy of them and calls the owner class ( in apps/models ) which then calls on the log parser (also in /lib) to do the actual work. (Should both of those classes, the observer and the parser be in app/models?) Am due to deliver this application in a few days and this is killing it (and me). Am using DirectoryWatcher to look for flag files that indicate the start and finish of the delayed_jobs. That is started at the end of environment.rb like this: require 'directory_watcher' $scriptStatusObserver = ScriptStatusObserver.new dirToWatch ="#{RAILS_ROOT}/tmp/flags" $directoryWatcher = DirectoryWatcher.new( dirToWatch ) $directoryWatcher.glob= "*.flg" $directoryWatcher.interval=(15) $directoryWatcher.add_observer( $scriptStatusObserver ) $directoryWatcher.persist=("#{RAILS_ROOT}/tmp/flags/dw_state.yml") $directoryWatcher.start at_exit { $directoryWatcher.stop } This code is outside of the run method (btw is that the best place or is inside the run better?) Here is the observer: require 'script_run' class ScriptStatusObserver def initialize @rcvdEvents = [] end def update( *events ) begin puts "#{LINE.to_s}: ScriptStatusObserver events: \n"+events.to_yaml cnt = 0 events.each do |e| if e.to_s.match(/^\s*added/) cnt = cnt + 1 @rcvdEvents << e end end ScriptRun.new.catch_up( @rcvdEvents ) if cnt > 0 @rcvdEvents.clear rescue puts $! end end end Here is ScriptRun (it attaches to an associative table built with has_many:through) require 'observer' class ScriptRun < ActiveRecord::Base set_table_name "scripts_runs" belongs_to :script belongs_to :run def parse( result ) parser = LogParser.new parser.parse(result) end def catch_up( events ) events.each do |e| typ = e.type path = e.path thisMatch = path.match(/flags\/(\d+)_(\d+)_([\d\.]+)_(\w+)\.flg/) run_id = thisMatch[1] script_id = thisMatch[2] ts = thisMatch[3] status = thisMatch[4] if e.to_s.match(/^\s*added/) status_update( script_id, run_id, status, ts, path ) end end end def status_update( script_id, run_id, status, ts, path ) scriptrun = ScriptRun.find(:first, :conditions => [ "run_id = ? and script_id = ?", run_id.to_i, script_id.to_i ]) if scriptrun.kind_of?(ScriptRun) currStatus = scriptrun.status if not currStatus == 'completed' scriptrun.update_attribute(:status, status) if status == 'parse' flag = File.new(path) logSpec = flag.gets flag.close logName = File.basename(logSpec) logPath = logSpec.sub(logName, '') logName =~ /^(([\w_]+)_([\w]+)_(\d+))\.log$/ name = $1 basename = $2 runenv = $3 tsOrPid = $4 result = Result.new result.log_path = logPath result.basename = basename result.name = name result.script_id = script_id.to_i result.run_id = run_id.to_i if runenv == 'sit' runenv = 'SIT3348' end result.application_environment_id = ApplicationEnvironment.find(:first, :conditions => [ "nodename = ?", runenv]).id parse(result) if run_completed?( run_id ) myRun = Run.find(run_id.to_i) if myRun.kind_of?( Run ) myRun.update_attribute( :completed, Time.now.to_f ) end end end end else puts "#{__LINE__.to_s}: ScriptRun.status_update: ScriptRun not found for run #{run_id} script #{script_id} ts #{ts.to_s}" end File.delete(path) end def run_completed?( id ) scriptruns = ScriptRun.find(:all, :conditions = [ "run_id = ?", id.to_i] ) scriptruns.each do |sr| if not sr.status == 'completed' return false end end return true end end LogParser is too long even for this post but it reads the script log and pulls detailed information (counts and timings) out of the log and writes to a details table. It also tallies and calculates averages and rolls those up into summary tables for quicker access from the web pages. Here is the error trace: (don't ask why everything is under my Windows profile. It's a long story) Scanner running 1270239731.43 directory_watcher.notify_observers: #, #] update:[#, /pneve/workspace/waftt-0.29/tmp/flags/100039_18_1270239550.108_parse.flg"] rake aborted! can't modify frozen hash C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:in []=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:inwrite_attribute_without_dirty' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/dirty.rb:139:in write_attribute' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:211:inlast_error=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:141:in handle_failed_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:115:inrun' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:162:in reserve_and_run_one_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:92:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:in times' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:66:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activesupport/ lib/active_support/core_ext/benchmark.rb:10:inrealtime' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:65:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:inloop' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/tasks.rb:13 c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:incall' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:597:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/1.8/monitor.rb:242:in synchronize ' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:590:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:583:in invoke' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2051:ininvoke_task' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:instandard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2023:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2001:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:in standard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:1998:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake: 31 c:/Documents and Settings/pneve/ruby/bin/rake:16:in `load' c:/Documents and Settings/pneve/ruby/bin/rake:16

  Read the article

• HELP!! Rake aborted! Can't modify frozen hash

  - by pmneve

  Too bad even the trace doesn't say which hash is involved. Sorry this post is long: am trying to provide enough context to be meaningful. Occurs intermittently when rake jobs:work is pulling a command out of delayed_jobs while my status observer is in the process of parsing a log file for detailed results of the previous delayed_job denizen. I have an observer class (in RAILS_ROOT/lib ) which listens for the events, makes a copy of them and calls the owner class ( in apps/models ) which then calls on the log parser (also in /lib) to do the actual work. (Should both of those classes, the observer and the parser be in app/models?) Am due to deliver this application in a few days and this is killing it (and me). Am using DirectoryWatcher to look for flag files that indicate the start and finish of the delayed_jobs. That is started at the end of environment.rb like this: require 'directory_watcher' $scriptStatusObserver = ScriptStatusObserver.new dirToWatch ="#{RAILS_ROOT}/tmp/flags" $directoryWatcher = DirectoryWatcher.new( dirToWatch ) $directoryWatcher.glob= "*.flg" $directoryWatcher.interval=(15) $directoryWatcher.add_observer( $scriptStatusObserver ) $directoryWatcher.persist=("#{RAILS_ROOT}/tmp/flags/dw_state.yml") $directoryWatcher.start at_exit { $directoryWatcher.stop } This code is outside of the run method (btw is that the best place or is inside the run better?) Here is the observer: require 'script_run' class ScriptStatusObserver def initialize @rcvdEvents = [] end def update( *events ) begin puts "#{LINE.to_s}: ScriptStatusObserver events: \n"+events.to_yaml cnt = 0 events.each do |e| if e.to_s.match(/^\s*added/) cnt = cnt + 1 @rcvdEvents << e end end ScriptRun.new.catch_up( @rcvdEvents ) if cnt > 0 @rcvdEvents.clear rescue puts $! end end end Here is ScriptRun (it attaches to an associative table built with has_many:through) require 'observer' class ScriptRun < ActiveRecord::Base set_table_name "scripts_runs" belongs_to :script belongs_to :run def parse( result ) parser = LogParser.new parser.parse(result) end def catch_up( events ) events.each do |e| typ = e.type path = e.path thisMatch = path.match(/flags\/(\d+)_(\d+)_([\d\.]+)_(\w+)\.flg/) run_id = thisMatch[1] script_id = thisMatch[2] ts = thisMatch[3] status = thisMatch[4] if e.to_s.match(/^\s*added/) status_update( script_id, run_id, status, ts, path ) end end end def status_update( script_id, run_id, status, ts, path ) scriptrun = ScriptRun.find(:first, :conditions => [ "run_id = ? and script_id = ?", run_id.to_i, script_id.to_i ]) if scriptrun.kind_of?(ScriptRun) currStatus = scriptrun.status if not currStatus == 'completed' scriptrun.update_attribute(:status, status) if status == 'parse' flag = File.new(path) logSpec = flag.gets flag.close logName = File.basename(logSpec) logPath = logSpec.sub(logName, '') logName =~ /^(([\w_]+)_([\w]+)_(\d+))\.log$/ name = $1 basename = $2 runenv = $3 tsOrPid = $4 result = Result.new result.log_path = logPath result.basename = basename result.name = name result.script_id = script_id.to_i result.run_id = run_id.to_i if runenv == 'sit' runenv = 'SIT3348' end result.application_environment_id = ApplicationEnvironment.find(:first, :conditions => [ "nodename = ?", runenv]).id parse(result) if run_completed?( run_id ) myRun = Run.find(run_id.to_i) if myRun.kind_of?( Run ) myRun.update_attribute( :completed, Time.now.to_f ) end end end end else puts "#{__LINE__.to_s}: ScriptRun.status_update: ScriptRun not found for run #{run_id} script #{script_id} ts #{ts.to_s}" end File.delete(path) end def run_completed?( id ) scriptruns = ScriptRun.find(:all, :conditions = [ "run_id = ?", id.to_i] ) scriptruns.each do |sr| if not sr.status == 'completed' return false end end return true end end LogParser is too long even for this post but it reads the script log and pulls detailed information (counts and timings) out of the log and writes to a details table. It also tallies and calculates averages and rolls those up into summary tables for quicker access from the web pages. Here is the error trace: (don't ask why everything is under my Windows profile. It's a long story) Scanner running 1270239731.43 directory_watcher.notify_observers: #, #] update:[#, /pneve/workspace/waftt-0.29/tmp/flags/100039_18_1270239550.108_parse.flg"] rake aborted! can't modify frozen hash C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:in []=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:313:inwrite_attribute_without_dirty' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/dirty.rb:139:in write_attribute' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activerecord/l ib/active_record/attribute_methods.rb:211:inlast_error=' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:141:in handle_failed_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:115:inrun' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:162:in reserve_and_run_one_job' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:92:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:in times' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:91:inwork_off' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:66:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/rails/activesupport/ lib/active_support/core_ext/benchmark.rb:10:inrealtime' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:65:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:inloop' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/worker.rb:62:in start' C:/Documents and Settings/pneve/workspace/waftt-0.29/vendor/plugins/delayed_job/ lib/delayed/tasks.rb:13 c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:incall' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:636:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:631:in execute' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:597:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/1.8/monitor.rb:242:in synchronize ' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:590:ininvoke_with_call_chain' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:583:in invoke' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2051:ininvoke_task' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:ineach' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2029:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:instandard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2023:in top_level' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2001:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:2068:in standard_exception_handling' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/lib/rake. rb:1998:inrun' c:/Documents and Settings/pneve/ruby/lib/ruby/gems/1.8/gems/rake-0.8.7/bin/rake: 31 c:/Documents and Settings/pneve/ruby/bin/rake:16:in `load' c:/Documents and Settings/pneve/ruby/bin/rake:16

  Read the article

• how to store data in ram in verilog

  - by anum

  i am having a bit stream of 128 bits @ each posedge of clk,i.e.total 10 bit streams each of length 128 bits. i want to divide the 128 bit stream into 8, 8 bits n hve to store them in a ram / memory of width 8 bits. i did it by assigning 8, 8 bits to wires of size 8 bit.in this way there are 16 wires. and i am using dual port ram...wen i cal module of memory in stimulus.i don know how to give input....as i am hving 16 different wires naming from k1 to k16. **codeeee** // this is stimulus file module final_stim; reg [7:0] in,in_data; reg clk,rst_n,rd,wr,rd_data,wr_data; wire [7:0] out,out_wr, ouut; wire[7:0] d; integer i; //wire[7:0] xor_out; reg kld,f; reg [127:0]key; wire [127:0] key_expand; wire [7:0]out_data; reg [7:0] k; //wire [7:0] k1,k2,k3,k4,k5,k6,k7,k8,k9,k10,k11,k12,k13,k14,k15,k16; wire [7:0] out_data1; **//key_expand is da output which is giving 10 streams of size 128 bits.** assign k1=key_expand[127:120]; assign k2=key_expand[119:112]; assign k3=key_expand[111:104]; assign k4=key_expand[103:96]; assign k5=key_expand[95:88]; assign k6=key_expand[87:80]; assign k7=key_expand[79:72]; assign k8=key_expand[71:64]; assign k9=key_expand[63:56]; assign k10=key_expand[55:48]; assign k11=key_expand[47:40]; assign k12=key_expand[39:32]; assign k13=key_expand[31:24]; assign k14=key_expand[23:16]; assign k15=key_expand[15:8]; assign k16=key_expand[7:0]; **// then the module of memory is instanciated. //here k1 is sent as input.but i don know how to save the other values of k. //i tried to use for loop but it dint help** memory m1(clk,rst_n,rd, wr,k1,out_data1); aes_sbox b(out,d); initial begin clk=1'b1; rst_n=1'b0; #20 rst_n = 1; //rd=1'b1; wr_data=1'b1; in=8'hd4; #20 //rst_n=1'b1; in=8'h27; rd_data=1'b0; wr_data=1'b1; #20 in=8'h11; rd_data=1'b0; wr_data=1'b1; #20 in=8'hae; rd_data=1'b0; wr_data=1'b1; #20 in=8'he0; rd_data=1'b0; wr_data=1'b1; #20 in=8'hbf; rd_data=1'b0; wr_data=1'b1; #20 in=8'h98; rd_data=1'b0; wr_data=1'b1; #20 in=8'hf1; rd_data=1'b0; wr_data=1'b1; #20 in=8'hb8; rd_data=1'b0; wr_data=1'b1; #20 in=8'hb4; rd_data=1'b0; wr_data=1'b1; #20 in=8'h5d; rd_data=1'b0; wr_data=1'b1; #20 in=8'he5; rd_data=1'b0; wr_data=1'b1; #20 in=8'h1e; rd_data=1'b0; wr_data=1'b1; #20 in=8'h41; rd_data=1'b0; wr_data=1'b1; #20 in=8'h52; rd_data=1'b0; wr_data=1'b1; #20 in=8'h30; rd_data=1'b0; wr_data=1'b1; #20 wr_data=1'b0; #380 rd_data=1'b1; #320 rd_data = 1'b0; /////////////// #10 kld = 1'b1; key=128'h 2b7e151628aed2a6abf7158809cf4f3c; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b0; #10 wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 kld = 1'b0; key = 128'h 2b7e151628aed2a6abf7158809cf4f3c; wr = 1'b1; rd = 1'b1; #20 wr = 1'b0; #20 rd = 1'b1; #4880 f=1'b1; ///////////////////////////////////////////////// // out_data[i] end /*always@(*) begin while(i) mem[i]^mem1[i] ; i<=16; break; end*/ always #10 clk=~clk; always@(posedge clk) begin //$monitor($time," out_wr=%h,out_rd=%h\n ",out_wr,out); #10000 $stop; end endmodule

  Read the article

• deadlocks in the innodb status

  - by shantanuo

  Mysql sever has suddenly become very slow. There are no queries in the slow query log but the innodb status shows something like the following. Does it mean that it is due to innodb deadlock? if Yes, what is the way out? *************************** 1. row *************************** Status: ===================================== 100315 12:55:29 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 5 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 187532, signal count 188120 Mutex spin waits 0, rounds 61908654, OS waits 33052 RW-shared spins 89241, OS waits 41948; RW-excl spins 5857, OS waits 1557 ------------------------ LATEST DETECTED DEADLOCK ------------------------ 100315 12:43:02 *** (1) TRANSACTION: TRANSACTION 0 56996536, ACTIVE 0 sec, process no 5000, OS thread id 3031395216 starting index read mysql tables in use 1, locked 1 LOCK WAIT 6 lock struct(s), heap size 1024, undo log entries 6 MySQL thread id 994, query id 7699751 localhost application Searching rows for update UPDATE QUERY *** (1) WAITING FOR THIS LOCK TO BE GRANTED: RECORD LOCKS space id 0 page no 4073 n bits 296 index `PRIMARY` of table `dbII/tbl_ticket_block_master` trx id 0 56996536 lock_mode X locks r ec but not gap waiting Record lock, heap no 141 PHYSICAL RECORD: n_fields 23; compact format; info bits 0 0: len 7; hex 33353837393936; asc 3587996;; 1: len 4; hex 800001f4; asc ;; 2: len 1; hex 47; asc G;; 3: len 2; hex 6f6b; asc ok;; 4: le n 6; hex 0000035957fe; asc YW ;; 5: len 7; hex 000000401737c0; asc @ 7 ;; 6: SQL NULL; 7: SQL NULL; 8: SQL NULL; 9: len 3; hex 8fb46e; asc n;; 10: SQL NULL; 11: len 1; hex 30; asc 0;; 12: len 0; hex ; asc ;; 13: SQL NULL; 14: len 1; hex 33; asc 3;; 15: len 4; hex 4b9ceebe ; asc K ;; 16: len 1; hex 30; asc 0;; 17: len 4; hex 80006ae8; asc j ;; 18: len 0; hex ; asc ;; 19: len 0; hex ; asc ;; 20: len 0; hex ; asc ;; 21: len 0; hex ; asc ;; 22: len 0; hex ; asc ;; *** (2) TRANSACTION: TRANSACTION 0 56996527, ACTIVE 0 sec, process no 5000, OS thread id 2961476496 fetching rows, thread declared inside InnoDB 237 mysql tables in use 3, locked 3 121 lock struct(s), heap size 11584, undo log entries 16 MySQL thread id 995, query id 7699729 localhost application Searching rows for update UPDATE QUERY *** (2) HOLDS THE LOCK(S): RECORD LOCKS space id 0 page no 4073 n bits 296 index `PRIMARY` of table `DBII/tbl_ticket_block_master` trx id 0 56996527 lock_mode X Record lock, heap no 1 PHYSICAL RECORD: n_fields 1; compact format; info bits 0 0: len 8; hex 73757072656d756d; asc supremum;; Record lock, heap no 2 PHYSICAL RECORD: n_fields 23; compact format; info bits 0 0: len 7; hex 33353837343631; asc 3587461;; 1: len 4; hex 800001f4; asc ;; 2: len 1; hex 47; asc G;; 3: len 6; hex 497373756564; asc Is sued;; 4: len 6; hex 000003425295; asc BR ;; 5: len 7; hex 8000000464012c; asc d ,;; 6: SQL NULL; 7: len 4; hex 80000058; asc X;; 8: len 1; hex 43; asc C;; 9: len 3; hex 8fb465; asc e;; 10: len 3; hex 8fb46d; asc m;; 11: len 1; hex 30; asc 0;; 12: len 0; hex ; asc ; ; 13: SQL NULL; 14: len 1; hex 33; asc 3;; 15: len 4; hex 4b9b33a2; asc K 3 ;; 16: len 3; hex 756d67; asc umg;; 17: len 4; hex 80006744; asc gD;; 18: len 0; hex ; asc ;; 19: len 0; hex ; asc ;; 20: len 0; hex ; asc ;; 21: len 0; hex ; asc ;; 22: len 0; hex ; asc ;;

  Read the article

< Previous Page | 277 278 279 280 281 282  | Next Page >