Search Results

Search found 9056 results on 363 pages for 'world'.

Page 281/363 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• Android webbrowser returns code 500 for webpage on Nginx webserver

  - by Paxxil

  Hey! I've come to a very weird behavior of a web browser on android mobile phone (I've tried HTC Wildfire and HTC Desire phones). I have a web server with Nginx v0.8.54. When i try to open a web page on the phone it shows me error: The requested item could not be loaded! (Status code: 500) BUT it only happens when I am requesting page through Mobile network. On Wifi it works just fine .... but there is more .... if I stop Nginx and start Apache web server it works just fine on both Mobile network and wifi. I've also tried other mobile network and it is the same behavior. Some server stats: Firewall is OFF Selinux is OFF the web page (using Nginx web server) opens normally on any other browser (IE, FF, Opera, Chrome, Safari) on the laptop or PC Nothing in nginx error.log This is the only entry in access.log when the page is requested: xxx.xxx.xxx.xxx - - [17/Mar/2011:11:19:49 -0500] 200 "GET / HTTP/1.1" 27405 "-" "Mozilla/5.0 (Linux; U; Android 2.2; en-gb; Desire_A8181 Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" "-" index.html has only "Hello World" string in it. There is no fishy javascript or anything else. .... but there is even more.... if i open the same page on another server, with the same Nginx build, with the same server and web server configuration.... it opens just fine. if anyone has any idea on what may be going on, i would really appreciate it if you let me know. Thanks! EDIT: i forgot to mention that page opens OK on Iphone and Nokia

  Read the article

• What ways are there to set permissions on an Exchange 2003 mailbox?

  - by HopelessN00b

  I'm having a difficult/impossible time tracing down a permissions issue on an Exchange 2003 mailbox, and I was wondering if I'm missing any technical possibilities here. The basic question is what ways are there to set a user's permissions to access a mailbox in Exchange 2003? I know of two. Permissions on the mailbox itself (Mailbox Rights) and having delegated rights. And then, if it's possible, how would one view all the permissions (including delegated permissions) on the mailbox? The situation is that a new user who's been set up "exactly like all the others" in his department (pretty sure he was copied via the right click option in ADUC, in fact) can't access a specific shared mailbox, which I've been assured about a dozen other people do have access to and access on a regular basis. As to how they got permissions to the mailbox, no one knows, so it must have been granted by a white wizard whose spell has since worn off, so now IT has to handle it instead. Anyway... This mailbox is a normal AD user, created as a service account, for which no one knows the password (of course), so it's probably not the case that this service account was being used to delegate permissions. Upon taking examining the Mailbox Rights directly... Here are the permissions I see: This leads me to believe that one of two things are happening - the managers have been delegating full mailbox permissions to the rest of the department, or everyone's logging in using... not their own account. But, before I get too excited about the prospect of busting out the LART and strolling over to that department, I want to make sure I'm not missing another possible explanation. Like most of the rest of the world, I ditched Exchange 2003 at the earliest possible opportunity, and had been looking forward to never seeing it again, so I'm a bit rusty on the intricacies of how it [mostly, sort of] works. Anyone see any or possibilities, or things I may have missed, or does the LART get to come out and play?

  Read the article

• nginx config woes for multiple subdomains & domains

  - by Peter Hanneman

  I'm finally moving away from Apache and I've got the latest development version of nginx running on a fully updated Ubuntu 10.04 VPS. I've got a single dedicated IP for the box (1.2.3.4) but I've got two separate domains pointing to the server: www.example1.com and www.example2.net. I would like to map the fallowing relationships between urls and document roots in the config: www.example1.com / example1.com -> /var/www/pub/example1.com/ subdomain.example1.com -> /var/www/dev/subdomain/example1.com/ www.example2.net / example2.net -> /var/www/pub/example2.net/ subdomain.example2.net -> /var/www/dev/subdomain/example2.net/ Where the name of the requested subdomain is a folder under /var/www/dev/. Ideally a request for a non-existent subdomain(no matching folder found) would result in a rewrite to the public site (eg: invalid.example1.com -- www.example1.com) however a mere "404 Not Found" wouldn't be the worst thing in the world. It would also be nice if I didn't need to modify the config every time I mkdir a new subdomain folder - even better if I don't need to edit it for a new domain either...but now I'm getting greedy... :p Although in my defense Apache did all of this with a single directive. Does anyone know how I can efficiently mimic this behavior in nginx? Thanks in advance, Peter Hanneman

  Read the article

• Using gitlab behind Apache proxy all generated urls are wrong

  - by Hippyjim

  I've set up Gitlab on Ubuntu 12.04 using the default package from https://about.gitlab.com/downloads/ {edit to clarify} I've set up Apache to proxy and run the nginx server the package installed on port 8888 (or so I thought). As I had Apache installed already I have to run nginx on localhost:8888. The problem is, all images (such as avatars) are now served from http://localhost:8888, and all the checkout urls Gitlab gives are also localhost - instead of using my domain name. If I change /etc/gitlab/gitlab.rb to use that url, then Gitlab stops working and gives a 503. Any ideas how I can tell Gitlab what URL to present to the world, even though it's really running on localhost? /etc/gitlab/gitlab.rb looks like: # Change the external_url to the address your users will type in their browser external_url 'http://my.local.domain' redis['port'] = 6379 postgresql['port'] = 2345 unicorn['port'] = 3456 and /opt/gitlab/embedded/conf/nginx.conf looks like: server { listen localhost:8888; server_name my.local.domain; [Update] It looks like nginx is still listening on the wrong port if I don't specify localhost:8888 as the external_url. I found this in /var/log/gitlab/nginx/error.log 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: bind() to 0.0.0.0:80 failed (98: Address already in use) 2014/08/19 14:29:58 [emerg] 2526#0: still could not bind() Apache setup looks like: <VirtualHost *:80> ServerName my.local.domain ServerSignature Off ProxyPreserveHost On AllowEncodedSlashes NoDecode <Location /> ProxyPass http://localhost:8888/ ProxyPassReverse http://127.0.0.1:8888 ProxyPassReverse http://my.local.domain </Location> </VirtualHost> Which seems to proxy everything back ok if Gitlab listens on localhost:8888 - I just need Gitlab to start displaying the right URL, instead of localhost:8888.

  Read the article

• Syncing Multiple Google Calendars and with Outlook and Android

  - by Fred Thomas

  Perhaps this is a multipart question, but I deal with a lot of calendars in my life, and want to know if there is some way to sync them all together, and maintain appropriate privacy. So I have a family calendar that my ex and I maintain for kid events, and I have a personal calendar for my own life, and I have an Outlook work calendar, for work. Ideally I'd look at my calendar on my Android phone. Is it possible to sync them all together? Is it possible for there to be one calendar to rule them all on my phone, but have the other calendars blank out spaces that are from other calendars, but only show the blanked out without the details. (I don't want my date with Miss Hottie to appear that way on the family calendar, and I probably don't want my visit to the proctologist to appear in the corporate exchange server.) Are there tools available to do this? Bonus question, can I do the same with my to do lists? Double bouns question -- how can I solve world hunger and help us to all live together in peace? :-)

  Read the article

• Vim - Displaying Code Output in a New Window á la Textmate?

  - by Michael Density

  A few months back I switched from Textmate to Vim. Overall I really love Vim, but one of the things I miss from Textmate is using the ⌘R command to run Ruby code and having the results neatly pop up in a new, scrollable window. Obviously, Vim is capable of running Ruby code and displaying the output with :w !ruby. The only downside to this is that if the resulting output is too long I can't scroll through it. To combat this problem I tried modifying a :redir function from Vim Tips. It looks like this: function! TabNew(cmd) redir => message silent execute a:cmd redir END tabnew silent put=message set nomodified endfunction command! -nargs=+ -complete=command TabNew call TabNew(<q-args>) Now the output from Ruby is put into a new tab. However, I can't get it to pop up in a new, separate window. Changing tabnew to new just sends the output to a split in the same window. The other problem is that a visible ^M gets appended to the end of each line, so the output ends up looking like this, which is kind of bothersome: Hello World!^M So, is there any way to get the output into a separate window without the ^M appended to the end? Are there any plugins I should be trying to achieve this Textmate-like effect for code output?

  Read the article

• What kinds of protections against viruses does Linux provide out of the box for the average user?

  - by ChocoDeveloper

  I know others have asked this, but I have other questions related to this. In particular, I'm concerned about the damage that the virus can do the user itself (his files), not the OS in general nor other users of the same machine. This question came to my mind because of that ransomware virus that is encrypting machines all over the world, and then asking the user to send a payment in Bitcoin if he wants to recover his files. I have already received and opened the email that is supposed to contain the virus, so I guess I didn't do that bad because nothing happened. But would I have survived if I opened the attachment and it was aimed at Linux users? I guess not. One of the advantages is that files are not executable by default right after downloading them. Is that just a bad default in Windows and could be fixed with a proper configuration? As a Linux user, I thought my machine was pretty secure by default, and I was even told that I shouldn't bother installing an antivirus. But I have read some people saying that the most important (or only?) difference is that Linux is just less popular, so almost no one writes viruses for it. Is that right? What else can I do to be safe from this kind of ransomware virus? Not automatically executing random files from unknown sources seems to be more than enough, but is it? I can't think of many other things a user can do to protect his own files (not the OS, not other users), because he has full permissions on them.

  Read the article

• Simplest DNS solution for remote offices

  - by dunxd

  I look after a bunch of remote offices that connect via VPN - a Cisco ASA 5505 in each office acts as Firewall and VPN end point. Beyond that we keep things as simple as possible in the offices to minimise the support burden. We don't have any kind of server except in offices large enough to justify having someone dedicated to IT. Basically there is the ASA, some computers, a network printer and a switch. One of the problems I am seeing in a lot of offices is that DNS requests looking up hosts inside our network often fail - I'm assuming timeouts due to the offices internet connection (they are all in developing world countries) having some sub-optimal qualities (e.g. high latency caused by VSAT segments, or packet loss. The obvious solution to this is to have some sort of local DNS service that can serve local requests - so I think it would need to do zone transfers from our Microsoft Windows 2008 R2 DNS servers at HQ. However, simply installing Windows Servers in each office is both expensive, and creates a support burden. This got me thinking about pfsense/m0n0wall on embedded devices - those can act as a DNS server, and could be configured at HQ and sent out as just something that needs to be plugged into the network and can then be forgotten about by the staff locally. Maybe there are some alternatives to the ASA 5505 that include some DNS functionality. Has anyone here dealt with the problem, either using some kind of embedded device, or found some other solution? Any gotchas or reasons to avoid what I have suggested?

  Read the article

• Knowledge and user generated content management system to track files, research, proposals, etc.?

  - by Eshwar

  I'll try keep it short. Here's the scenario: We have employees all over the world performing similar work i.e. research, generating powerpoint slides, word documents, graphics, etc. Many times a lot of this previous work can be reused for another future project. The current arrangement is email and phone calls which as you would agree is quick if you know where to look but otherwise archaic and very very inefficient. So I am looking for software that will allow me to do the following: Tag files e.g. an investor presentation on cellphone usage in kenya would be tagged investor, cellphone, kenya Manage references e.g. if we read something on the internet, should be able to paste that link in some fashion and tag it as above. Preferably cloud based so that it can be accessed by anybody and additionally would be nice (though NOT must) to have access levels (director, manager, everyone) A nice interface that non technically savvy folks can warm up to ;) A desktop app would be handy so that people don't always have to click upload or something A tree based system is inefficient in this case because content is usually linked across branches and also people might not quite agree on one format of a tree. Tagging works around this very nicely. What I have considered so far: Evernote (for its more professional look) Springpad (for its versatility with content) Mendeley (this is a research manager and in some ways ideal, but i fear its limited to PDFs) The goal is that when somebody wants to look for a document, they don't have to ask a colleague, they can just search with keywords and all relevant information shows up. Thanks!

  Read the article

• How can I safely close this window and forever avoid seeing similar pop-ups from Mackeeper Zeobit's malware and spyware?

  - by Michael Prescott

  The attached image shows a window that just popped up and the only button available is the OK button. I could Force quit Safari, but I've got several sites open right now and don't want to try and find my place again. Besides, I've seen similar hacks in the past and I'd like to learn how to handle them in a way better than just a brute force-quit. I've never heard of MacKeeper or Zeobit, so I opened Firefox and did a few searches while Safari is obviously still stuck, waiting for me to click the sneaky OK button in the dialog window. Anyhow, at least the first few pages of most search results contain lots of blabbering from questionable witnesses about how MacKeeper saved them from some malware or spyware. However, any company that is hacking the browser to maliciously install their product is itself the criminal and not providing a true security application. So, there are three questions here: How can I close this window? Can I do something to Safari to avoid these hacks in the future? (Just curious) Is MacKeeper or Zeobit somehow loading the search results so that no information about their application being malware or spyware is listed (I can't be the only person in the world that is offended by their tactics, even though it appears I am)?

  Read the article

• PHP 5.3.2 Upgrade on Windows

  - by mcondiff

  I have a development box running Windows XP, Apache 2.2.15 Mysql and PHP 5.2.6 About a month ago I updated the Apache to the latest version and it went swimmingly. I am not having the same success with upgrading PHP to the latest version. I backed up my PHP directory and then deleted it. Used the Windows Installer for PHP 5.3.2, installed as an Apache 2.2.X module. I can get "Hello World" and phpinfo() to come up but cannot get mysql to connect. I have the extension un-commented in the php.ini and shouldn't really have to touch the Apache httpd.conf file since I didn't change the directory of PHP. Not sure what I'm doing wrong here. I have to get this right and then upgrade the Live Server too so I want to get this down pat. I've tried to use installation guides on the web with no luck. Any info pertaining to this problem would be great. I'm also afraid that the other PHP modules may not load but cannot really tell anything past mysql not working.

  Read the article

• setup lowcost image storage server with 24x SSD array to get high IOPS?

  - by Nenad

  I want to build let's name it a lowcost Ra*san which would host for our social site the images (many millions) we have 5 sizes of every photo with 3 KB, 7 KB, 15 KB, 25 KB and 80 KB per Image. My idea is to build a Server with 24x consumer 240 GB SSD's in Raid 6 which will give me some 5 TB Disk space for the photo storage. To have HA I can add a 2nd one and use drdb. I'm looking to get above 150'000 IOPS (4K Random reads). As we mostly have read access only and rarely delete photos i think to go with consumer MLC SSD. I read many endurance reviews and don't see there a problem as long we don't rewrite the cells. What you think about my idea? - I'm not sure between Raid 6 or Raid 10 (more IOPS, cost SSD). - Is ext4 OK for the filesystem - Would you use 1 or 2 Raid controller, with Extender Backplane If anyone has realized something similar i would be happy to get Real World numbers. UPDATE I have buy 12 (plus some spare) OCZ Talos 480GB SAS SSD Drive's they will be placed in a 12-bay DAS and attached to a PERC H800 (1GB NV Cache, manufactured by LSI with fastpath) Controller, I plan to setup Raid 50 with ext4. If someone is wondering about some benchmarks let me know what you would like to see.

  Read the article

• Windows file association for README, INSTALL, LICENSE and the like [closed]

  - by Lumi

  Possible Duplicate: How to set the default program for opening files without an extension in Windows? Many files originating in the UNIX world come without file extension. Popular examples include README, INSTALL, LICENSE. We know for a fact that these are text files. It is therefore a bit disappointing not to be able to just double-click them open in Explorer and see them in Notepad (actually, Notepad2 because of the UNIX line endings which silly Microsoft Notepad doesn't render correctly). Does anyone know of a way to create a file association for, say, README files without extension? This could then be replicated to cover the most frequently occurring file types, and then double-clicking them open would work. Update (Sort of in response to all your comments.) Thanks, folks, your comments and answers have helped me. @Indrek, yes, I was under the assumption that you could somehow create an association for just README or Makefile, and couldn't do so for files without extension. Turns out the contrary is true, and yes, that is a workaround that neatly solves the issue. Ultimately, I just want to be able to double-click to open a README or Makefile, that's all. @Sampo, the SendMe trick is also useful, although usability is not as great as a straight double-click. (I'm really lazy sometimes.) Turns out the following trick using ftype and ftype from an Administrator prompt does the double-click enabling job: assoc .=no_ext ftype no_ext=%SystemRoot%\system32\NOTEPAD.EXE %1 :: You can see it created some entries in the registry: reg query hkcr\no_ext /s reg query hkcr\. /s

  Read the article

• What is the correct way to move a file?

  - by Joe McDonald

  We had an issue at my work where I cut and pasted some files. Immediately when I did it, a ton of files were lost. I've been working in IT for 10+ years. I know how to cut and paste a file. Well, when it went up to my managers as to why the files were lost, they deemed it to my cut and paste that caused all the problems and asked why in the world someone as knowledgeable as me would ever cut and paste a file, and didn't I know that was totally the wrong way to move a file? The correct way to move a file is to drag the file. When cutting and pasting, it moves that 1+ GB file (on the server) to the clipboard (on my PC), which, obviously, will cause problems. Dragging a file never hits the clipboard. Be honest, I don't believe that for a minute. I believe when I cut and paste text, it goes to the clipboard. I've seen it in the old versions of windows. But when right clicking on 100+ files that equals 1+ GB, I can't believe that all that data is copied immediately out of whatever share I'm on at the server across my wireless on my laptop to my local clipboard to just go back to the server to another share. It seems they would build some logic in the server OS or my local OS (more likely my local OS) that would say when copying files, don't perform the move action until I click paste and if the files are staying local to where they were before, just move them. So, who's right?

  Read the article

• High latency due to non-presence of a transit provider in my country

  - by nixnotwin

  My ISP, a state owned incumbent, buys bandwidth from different transit providers. Whenever it buys transits it announces only a specific prefix (in most cases a hitherto unused) through the new transit AS. For e.g. if it runs out of bandwidth, it buys bandwidth from a new transit and announces a new prefix through it, while the same prefix is not announced (or announced with lowest metrics, so that the routes are very rarely used) via the old transits which continue to provide bandwidth to it. I am a business customer, so I have a fiber based link to the ISP and a tiny subnet is given to me. The subnet which is provide to me is part of a prefix which is announced by the AS of a transit who, it seems, do not have a presence in my country. So when I do a trace the packets, when they leave my ISP's AS, they take about 275ms to reach the transit providers core router, which is located in USA (half the world away). Also for upstream traffic my ISP uses a transit provider (tier 1) who has a presence in my country. But the return path is always through the transit which is in USA. So, average latency is 400ms. All the users of other ISPs in my country discover my subnet via USA. Even the traffic from neighboring countries, from Europe (which is much nearer) follows the path via USA. Sites using CDNs also resolve to ips in USA. I have informed the ISP NOC about the issue and I have asked them to provide an ip subnet belonging to a prefix announced by a local transit (preferably a tier 1 transit provider) and I am waiting for a reply. My question: Is it a serious issue that I must follow up to get it resolved? When I compared the latency on other providers in my country, it is, in most cases, less than half of my ISPs latency. Why my ISP doesn't announce all its prefixes to all of its transit providers, so that the packets can take efficient and nearest routes to reach prefixes that originate within its network?

  Read the article

• Which CPU for XEN - LAMP testbed - Budget

  - by deploymonkey

  Dear serverfault knowledgeables, im in a decision dilemma right now, which I can't resolve due to lack of hands on experience. I need to build a testbed for basically virtualizing a LAMP application (os'ses not yet decided) including server side calculations. I'll opt for XEN since it seems better supported by cloud hosters at the moment. The hardware is for a proof of concept for a startup doing saas and might be used for closed live alpha/beta later on. After testing, the testbed might be a) deployed as a colocated white box server b) used as workstation Single socket is enough. We want to have ECC memory for reliability, this excludes most of the consumer line at intel. If intel CPU, then threaded cpu (HT) is preferred have at least 16 gig ram If justified by price and reliability is not too bad, a high quality desktop MB instead of a server MB would be worth a try It came down to the opteron 6128 vs. the xeon 5620 for me after a lot of research, but I don't necessarily have to be right. Which CPU is preferrable, concerning TCO (MB price, power requirements 24/7...) , Opteron 6128 or Xeon 5620? Which one offers better performance in real world applications? (Do You have any other suggestions I probably overlooked?) Thank You for Your consideration

  Read the article

• Contacts in Outlook 2003/2007, some questions

  - by Ernst

  If I create a distribution list and then select members, can I see different fields than the default ones? In 2007 there are radio buttons for 'name only' and 'more columns', but the latter does seem to only result in no results at all, regardless of which address book I choose. In 2003 there is no such thing. Is there a plug in that will break up the recipients (whether they be to, cc, or bcc) in groups of X, and send then a number of mails as required? Our host allows only 50 recipients per mail and only 300 total recipients per 5 minutes. I know the email client blat has exactly this functionality, but it does not seem to be able to connect to the exchange server to get the contacts needed. Could I maybe set outlook to send to blat which then does the breaking up as necessary? Can I (or is there a plug in for this) export only part of the contacts instead of all of them? Note that we send mail outside our organisation via our web host where we've got a few mailboxes, and we use our exchange (2000) server only internally, the few people that can send email to the outside world have an external mailbox as well as their exchange account defined. I might be able to convince our general boss that we can simply give (some) people the ability to send outside via exchange, but I might just as well not succeed. Alternatively, is there another program that can connect to exchange to get the contacts (selected based on categories) and then send via smtp in groups with delays between the mails?

  Read the article

• Why does Windows Firewall want to block Google Chrome today?

  - by hippietrail

  I've been using the same public Wi-Fi (staying in a guesthouse) for over a week now. But this morning for the first time I got this puzzling warning from Windows Firewall: Why does Windows Firewall want to block one of the world's most popular web browsers today after being fine with it for years, and being fine with it on this connection for a week? Could it hinge on the words, some features? If so could it be something like a rare or new feature of Chrome that uses a different HTTP port? And if so why doesn't the security alert tell me any more about it? Or could it be a known bug in Windows Firewall? Or perhaps a known virus etc attaching itself to Google Chrome? Or is there a chance it's related to "Other browser makers follow Google's lead, revoke rogue certificates"? I haven't restarted Chrome for days and have downloaded but not installed a Windows update from a few days ago. So I'm not sure what may have managed to change on my machine since yesterday.

  Read the article

• Setting up port forwarding for web server

  - by Javier Badia

  This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

  Read the article

• Getting 404 error on MVC web-site

  - by RB

  I have an IIS7.5 web-site, on Windows Server 2008, with an ASP.NET MVC2 web-site deployed to it. The website was built in Visual Studio 2008, targeting .NET 3.5, and IIS 5.1 has been successfully configured to run it as well, for local testing. We've installed the world's simplest MVC application (the one which is created when you create a new MVC2 project in Visual Studio), and we are getting 404s on any page we try and access - e.g. <my_server>/Home/About will generate a 404. I've asked this question on StackOverflow as well, but that was before I knew it was a server issue. I have checked the following things: There are 404 entries in the IIS log, corresponding to each request. The application pool for the web-site is set to use the Integrated pipeline. The "customErrors" mode is set to off. .NET 3.5 SP1 is installed ASP.NET MVC 2 is installed I've used MVC Diagnostics to confirm all MVC DLLs are being found. ASP.NET is enabled in IIS, which we've demonstrated by running the MVC Diagnostics page. KB 2023146 did highlight that HTTP Redirection was off, so we've turned it on, but no joy. Any ideas will be greatly appreciated! Someone did suggest that there might be problems running it caused by Windows Server 2008 being 64-bit - does anyone know anything about this?

  Read the article

• Cherrypy web application won't communicate outside localhost via VPN

  - by Geoffrey Shea

  I'm trying to run a Python2.7/Cherrypy web server on Win 7 which is connected to a VPN to establish a dedicate IP address. (If I run the exact same application on Win XP connected to the VPN it works fine.) On Win 7 I tried configuring it to use port 8080, 8005, or 80 with no improvements. I turned off Windows Firewall altogether to test and there was no improvement. If I run Apache on the Win 7 machine on port 80 it works fine so I'm pretty sure it's not the VPN service or router. If I go to WhatismyIP.com it shows that I have the IP address being provided by the VPN. Here is the Python code, but I suspect the problem is the network configuration: import cherrypy class HelloWorld: def index(self): return "Hello world!3" index.exposed = True cherrypy.root = HelloWorld() cherrypy.config.update({"global":{ "server.environment": "production", "server.socketPort": 8005 } }) cherrypy.server.start() This will return a web page if I go to localhost:8005, but not if I go to the VPN IP address:8005 from another machine. As I said, if I run Apache on the Win 7 machine on port 80 I can see it at localhost:80 AND at the VPN IP address:80 from another machine. Thanks for any light you can shed! Geoffrey

  Read the article

• Slackware - Assigning routes (IP address ranges) to one of many network adapters

  - by Dogbert

  I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

  Read the article

• Apache, Tomcat and mod_jk for load balancing

  - by pHk

  Hi guys. I've set-up a basic Apache (2.2.x) and Tomcat (6.0.x) set-up using mod_jk for load balancing using the worker.properties file. Preliminary testing seems to show that this works relatively well, and it was quite easy to set-up. However; the fact that it was so easy to set-up has got me a little worried. We're dealing with 100 - 300 concurrent users using the same web application (deployed on 2 or 3 Tomcat instances). I have done a little Googling and looking around on here and there seems to be more than 1 way to accomplish this (one example on here used a balancer:// style URL, which I've never seen before in an Apache config). For example, one question I ask myself is how reliable the load detection on mod_jk really is (Busyness, Session, Request, etc). In your experience, does this set-up prove to be reliable in real world scenarios? Any pointers on improvements, pit falls or interesting literature/articles? I've worked with Apache before, but am in no way an expert. Thanks in advance.

  Read the article

• Windows 8 x64 with VMWare Workstation or inside ESXi

  - by Dommer

  I need to run several virtual machines on a core i7-920 box with 12GB or RAM and a 256GB SSD to host the VMs. It also has a Highpoint RocketRaid 2720SGL RAID controller with a 12TB RAID 5 array. I want one of my VMs to run Windows 8 x64, to have access to the RAID array as a native disk (not as networked drives and it needs to run at full speed) and to be able to send files quickly across the network. Initially I thought I'd try to do this using ESXi 5, but I have been unable to find any working RAID drivers for the RR2720SGL and it is not on the HCL for ESXi 5. In light of this, I have installed Windows 8 x64 on the hardware and am thinking of installing VMWare Workstation and running my VMs inside there. I guess my questions are these: How does VMWare Workstation 9 perform compared to ESXi 5? In the real world I mean? Presumably installing Win 8 as the host OS will give me way better performance for that Win 8 machine than Win 8 running under ESXi? I should stick with Windows 8 x64 as the host OS, right? If I install a domain controller VM inside my Win 8 box and join the Win 8 machine to that domain, am I insane (I would guess the Win 8 machine wouldn't see the domain controller until it finished starting everything up, but I don't think that matters)?! is it feasible to give metrics like this and if so, what is the likely value of x? 25%? 50%? 75%? Win 8 under ESXi runs x% as fast as Win 8 installed bare metal.

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >