Search Results

Search found 21328 results on 854 pages for 'device policy manager'.

Page 282/854 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• Realtek RTL8111/8168B wired network doesn't work anymore

  - by Radar4002

  This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

  Read the article

• Python Coding standards vs. productivity

  - by Shroatmeister

  I work for a large humanitarian organisation, on a project building software that could help save lives in emergencies by speeding up the distribution of food. Many NGOs desperately need our software and we are weeks behind schedule. One thing that worries me in this project is what I think is an excessive focus on coding standards. We write in python/django and use a version of PEP0008, with various modifications e.g. line lengths can go up to 160 chars and all lines should go that long if possible, no blank lines between imports, line wrapping rules that apply only to certain kinds of classes, lots of templates that we must use, even if they aren't the best way to solve a problem etc. etc. One core dev spent a week rewriting a major part of the system to meet the then new coding standards, throwing away several suites of tests in the process, as the rewrite meant they were 'invalid'. We spent two weeks rewriting all the functionality that was lost, and fixing bugs. He is the lead dev and his word carries weight, so he has convinced the project manager that these standards are necessary. The junior devs do as they are told. I sense that the project manager has a strong feeling of cognitive dissonance about all this but nevertheless agrees with it vehemently as he feels unsure what else to do. Today I got in serious trouble because I had forgotten to put some spaces after commas in a keyword argument. I was literally shouted at by two other devs and the project manager during a Skype call. Personally I think coding standards are important but also think that we are wasting a lot of time obsessing with them, and when I verbalized this it provoked rage. I'm seen as a troublemaker in the team, a team that is looking for scapegoats for its failings. Since the introduction of the coding standards, the team's productivity has measurably plummeted, however this only reinforces the obsession, i.e. the lead dev simply blames our non-adherence to standards for the lack of progress. He believes that we can't read each other's code if we don't adhere to the conventions. This is starting to turn sticky. Now I am trying to modify various scripts, autopep8, pep8ify and PythonTidy to try to match the conventions. We also run pep8 against source code but there are so many implicit amendments to our standard that it's hard to track them all. The lead dev simple picks faults that the pep8 script doesn't pick up and shouts at us in the next stand-up meeting. Every week there are new additions to the coding standards that force us to rewrite existing, working, tested code. Thank heavens we still have tests, (I reverted some commits and fixed a bunch of the ones he removed). All the while there is increasing pressure to meet the deadline. I believe a fundamental issue is that the lead dev and another core dev refuse to trust other developers to do their job. But how to deal with that? We can't do our job because we are too busy rewriting everything. I've never encountered this dynamic in a software engineering team. Am I wrong to question their adherence to coding standards? Has anyone else experienced a similar situation and how have they dealt with it successfully? (I'm not looking for a discussion just actual solutions people have found)

  Read the article

• Certify October Updates

  - by Sadia2

  Normal 0 false false false EN-US X-NONE X-NONE We have added some release and platform certifications to MOS Certify. Applications: Oracle Demantra 12.2.2 Collaboration Technologies: Oracle On Track Communication 1.0.0.0.0 Database : Oracle Database 11.2.0.4.0, Oracle Database Client 11.2.0.4.0, 11.2.0.3.0, Oracle Clusterware 12.1.0.1.0, 11.2.0.4.0, Oracle Real Application Clusters 12.1.0.1.0, 11.2.0.4.0, Oracle TimesTen In-Memory Database 11.2.2.5.0, Oracle Audit Vault and Database Firewall 12.1.1.0.0, Oracle Database Client 10.2.0.5, Oracle Secure Enterprise Search 11.2.2.2.0 E-Business Suite: Oracle E-Business Suite 12.2.2, 12.1.3, 12.1.2, 12.1.1, 12.0.4, 11.5.10.2, 11.5.9.2 Edge Applications: Oracle Transportation Management 6.3.2 Enterprise Manager: Enterprise Manager Base Platform – OMS 12.1.0.3.0 FSGBU Insurance Group: Oracle Health Insurance Back Office 10.13.2.0.0 Fusion Middleware: Oracle Application Development Framework 11.1.1.6.0, Oracle Business Intelligence Enterprise Edition 11.1.1.7.0, Oracle BI Answers 11.1.1.7.0, Oracle BI Composer 11.1.1.7.0, Oracle BI Presentation Services 11.1.1.7.0, Oracle BI Delivers 11.1.1.7.0, Oracle BI Interactive Dashboards 11.1.1.7.0, Oracle BI Scorecard and Strategy Management 11.1.1.7.0, Oracle BI Catalog Manager 11.1.1.7.0, Oracle BI Search 11.1.1.7.0, Oracle BIP Enterprise 11.1.1.7.0, Oracle BIP Scheduler 11.1.1.7.0, Oracle Real-Time Decision Center 11.1.1.7.0, Oracle Segmentation Server 11.1.1.7.0, Oracle JRE 1.7.0_45, 1.7.0_40, 1.7.0_25, 1.7.0_21, 1.7.0_17, 1.7.0_15, 1.7.0_13, 1.7.0_11, 1.7.0_10, 1.6.0_65, 1.6.0_26, Oracle JDK 1.7.0_45, 1.7.0_25, 1.7.0_17, 1.7.0_15, 1.7.0_13, 1.7.0_11, 1.6.0_65, 1.6.0_41, 1.6.0_26, Oracle Discoverer 11.1.1.7.0, 11.1.1.6.0, Discoverer Administrator 11.1.1.7.0, 11.1.1.6.0, Discoverer Desktop 11.1.1.7.0, 11.1.1.6.0, Oracle GoldenGate 12.1.2.0.0, Oracle GoldenGate Director 12.1.2.0.0, Java 1.7.0_10, Oracle Fusion Middleware 12.1.2.0.0, Oracle Data Integrator Agent 12.1.2.0.0, Oracle Data Integrator Studio 12.1.2.0.0, Oracle Data Integrator Console 12.1.2.0.0 JD Edwards EnterpriseOne: JD Edwards EnterpriseOne Enterprise Server 9.1.3.0, JD Edwards EnterpriseOne One View Reporting 9.1.3.0, JD Edwards EnterpriseOne Mobile Applications 9.0.2.0, 9.0.0.0, 9.1.2.0, JD Edwards EnterpriseOne for iPad 1.0.0.0 Linux & Server Virtualization (x86): Oracle VM Server for x86 3.2.6.0.0, 3.2.4.0.0, 3.2.3.0.0, 3.2.2.0.0, 3.2.1.0.0 MySQL: MySQL Database Server 5.6, 5.5, MySQL Cluster 7.3, 7.2, 7.1 Oracle Fusion Applications : Oracle Fusion Applications 11.1.7.0.0, 11.1.6.0.0, 11.1.5.0.0, 11.1.4.0.0 PeopleSoft: PeopleSoft PeopleTools 8.53, 8.52, 8.51, 8.5 Primavera GBU: Primavera Project Portfolio Mgmt 6.2.1, Primavera P6 Enterprise Project Portfolio Management 8.3.0.0.0 Siebel Enterprise: Siebel Application Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Database Server 8.2.2.4.0, 8.1.1.11.0 Siebel Web Server Extension 8.1.1.10.0 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Oracle Social Network Developer Challenge: Fishbowl Solutions

  - by Kellsey Ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. Today, I give you the final entry in the Oracle Social Network Developer Challenge, held last week during OpenWorld. This one comes from Friend of the ‘Lab and Fishbowl Solutions (@fishbowle20) hacker, John Sim (@jrsim_uix), whom you might remember from his XBox Kinect demo at COLLABORATE 12 (presentation slides and abstract) hacks and other exploits with WebCenter. We put this challenge together specifically for developers like John, who like to experiment with new tools and push the envelope of what’s possible and build cool things, and as you can see from his entry John did just that, mashing together Google Maps and Oracle Social Network into a mobile app built with PhoneGap that uses the device’s camera and GPS to keep teams on the move in touch. He calls it a Mobile GeoTagging Solution, but I think Avengers Assemble! would have equally descriptive, given that was obviously his inspiration. Here’s his description of the mobile app: My proposed solution was to design and simplify GeoLocation mapping, and automate updates for users and teams on the move; who don’t have access to a laptop or want to take their ipads out – but allow them to make quick updates to OSN and upload photos taken from their mobile device – there and then. As part of this; the plan was to include a rules engine that could be configured by the user to allow the device to automatically update and post messages when they arrived at a set location(s). Inspiration for this came from on{x} – automate your life. Unfortunately, John didn’t make it to the conference to show off his hard work in person, but luckily, he had a colleague from Fishbowl and a video to showcase his work.    Here are some shots of John’s mobile app for your viewing pleasure: John’s thinking is sound. Geolocation is usually relegated to consumer use cases, thanks to services like foursquare, but distributed teams working on projects out in the world definitely need a way to stay in contact. Consider a construction job. Different contractors all converge on a single location, and time is money. Rather than calling or texting each other and risking a distracted driving accident, an app like John’s allows everyone on the job to see exactly where the other contractors are. Using his GPS rules, they could easily be notified about how close each is to the site, definitely useful when you have a flooring contractor sitting idle, waiting for an electrician to finish the wiring. The best part is that the project manager or general contractor could stay updated on all the action (or inaction) using Oracle Social Network, either sitting at a desk using the browser app or desktop client or on the go, using one of the native mobile apps built for Oracle Social Network. I can see this being used by insurance adjusters too, and really any team that, erm, assembles at a given spot. Of course, it’s also useful for meeting at the pub after the day’s work is done. Beyond people, this solution could also be implemented for physical objects that are in route to a destination. Say you’re a customer waiting on rail shipment or a package delivery. You could track your valuable’s whereabouts easily as they report their progress via checkins. If they deviated from the GPS rules, you’d be notified. You might even be able to get a picture into Oracle Social Network with some light hacking. Thanks to John and his colleagues at Fishbowl for participating in our challenge. We hope everyone had a good experience. Make sure to check out John’s blog post on his work and the experience using Oracle Social Network. Although this is the final, official entry we had, tomorrow, I’ll show you the work of someone who finished code, but wasn’t able to make the judging event. Stay tuned.

  Read the article

• Prefilling an SMS on Mobile Devices with the sms: Uri Scheme

  - by Rick Strahl

  Popping up the native SMS app from a mobile HTML Web page is a nice feature that allows you to pre-fill info into a text for sending by a user of your mobile site. The syntax is a bit tricky due to some device inconsistencies (and quite a bit of wrong/incomplete info on the Web), but it's definitely something that's fairly easy to do.In one of my Mobile HTML Web apps I need to share a current location via SMS. While browsing around a page I want to select a geo location, then share it by texting it to somebody. Basically I want to pre-fill an SMS message with some text, but no name or number, which instead will be filled in by the user.What worksThe syntax that seems to work fairly consistently except for iOS is this:sms:phonenumber?body=messageFor iOS instead of the ? use a ';' (because Apple is always right, standards be damned, right?):sms:phonenumber;body=messageand that works to pop up a new SMS message on the mobile device. I've only marginally tested this with a few devices: an iPhone running iOS 6, an iPad running iOS 7, Windows Phone 8 and a Nexus S in the Android Emulator. All four devices managed to pop up the SMS with the data prefilled.You can use this in a link:<a href="sms:1-111-1111;body=I made it!">Send location via SMS</a>or you can set it on the window.location in JavaScript:window.location ="sms:1-111-1111;body=" + encodeURIComponent("I made it!");to make the window pop up directly from code. Notice that the content should be URL encoded - HTML links automatically encode, but when you assign the URL directly in code the text value should be encoded.Body onlyI suspect in most applications you won't know who to text, so you only want to fill the text body, not the number. That works as you'd expect by just leaving out the number - here's what the URLs look like in that case:sms:?body=messageFor iOS same thing except with the ;sms:;body=messageHere's an example of the code I use to set up the SMS:var ua = navigator.userAgent.toLowerCase(); var url; if (ua.indexOf("iphone") > -1 || ua.indexOf("ipad") > -1) url = "sms:;body=" + encodeURIComponent("I'm at " + mapUrl + " @ " + pos.Address); else url = "sms:?body=" + encodeURIComponent("I'm at " + mapUrl + " @ " + pos.Address); location.href = url;and that also works for all the devices mentioned above.It's pretty cool that URL schemes exist to access device functionality and the SMS one will come in pretty handy for a number of things. Now if only all of the URI schemes were a bit more consistent (damn you Apple!) across devices...© Rick Strahl, West Wind Technologies, 2005-2013Posted in IOS  JavaScript  HTML5   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Oracle Tutor: XPDL conversion (and why you should care)

  - by mary.keane

  You may have noticed that the Oracle Business Process Converter feature in Tutor 14 supports "XPDL" conversion to Oracle Business Process Analysis Suite (BPA), Oracle Business Process Management Suite (BPM), and Oracle Tutor, and you may have briefly wondered "what is XPDL?" before you moved on to the Visio import feature (a very popular feature in Tutor 14). This posting is for those who do not yet understand (or care) about XPDL and process modeling. Many of us (and I'm including myself) have spent years working in the process definition arena: we've written procedures, designed systems and software to help others write procedures, and have been responsible for embedding policies and procedures into training material for employees. We've worked with tools such as Oracle Tutor, Microsoft Visio, Microsoft Word, and UPK. Most of us have never worked with "modeling tools" before, and we certainly never had to understand BPMN. It's a brave new world in this arena, and companies desperately need people with policy and procedural system expertise to be able to work with system analysts so there is a seamless transfer of knowledge from IT to employees. When working with applications, a picture is worth a thousand words, so eventually you're going to need to understand and be able to work with business process models. XPDL is an acronym for XML Process Definition Language, and it is an interchange format for business process models. It allows you to take a BPMN model that was developed in one workflow application such as BizAgi and import it into another workflow application or a true BPMN management system such as Oracle BPM. Specifically, the XPDL format contains the graphical information of a model as well as any executable information. By using a common format, models can be moved from a basic modeling application used by business owners to applications used by system architects. Over 80 applications support the XPDL format, including MetaStorm ProVision, BEA ALBPM, BizAgi, and Tibco. I mention these applications because we have provided XSLT mapping files specifically for these vendors. Oracle Business Process Converter was designed with user extensibility in mind, and thus users can add their own XML files so that additional XPDL models from other vendors can be converted to BPM, BPA, and Oracle Tutor. Instructions on how to add your own files can be found in Appendix 4 of the Oracle Business Converter manual. Let's take a visual look at how this works. Here is an example of a model devloped in BizAgi: This model can be created by the average business user without a large learning curve, and it's a good start for the system analyst who will be adding web services as well as for the business manager who manages the process described in the model. By exporting this model as XPDL, the information can be converted into Oracle BPA and Oracle BPM as well as converted to Oracle Tutor to become the framework for a procedure. Through this conversion feature, one graphic illustration of a business process can be used by a system analyst, business analyst, business manager, and employee, as seen below. Model Converted to Tutor Procedure Below is the task section of the procedure after conversion from an XPDL file. Model converted to BPA Model converted to BPM End users still want step by step instructions on how to perform their jobs, so procedures (Oracle Tutor) and application simulations (UPK) are still a critical piece of the solution. But IT professionals need graphic descriptions of how the applications work, regardless of whether there are any tasks involving humans. Now there is a way to convert procedures (Oracle Tutor docx files) and basic models (XPDL files) so that business managers and system analysts can share process information. References Wikipedia XPDL. Workflow Management Coalition, XPDL Support and Resources Oracle Business Process Converter manual, Oracle Tutor 14 Oracle Business Process Management 11g If you have any XPDL conversion stories to share, we'd love to hear from you. Best wishes for the coming new year, Mary Keane, Senior Development Manager, Oracle Tutor and BPM

  Read the article

• JCP Awards 10 Year Retrospective

  - by Heather VanCura

  As we celebrate 10 years of JCP Program Award recognition in 2012,  take a look back in the Retrospective article covering the history of the JCP awards.  Most recently, the JCP awards were  celebrated at JavaOne Latin America in Brazil, where SouJava was presented the JCP Member of the Year Award for 2012 (won jointly with the London Java Community) for their contributions and launch of the Global Adopt-a-JSR Program. This is also a good time to honor the JCP Award Nominees and Winners who have been designated as Star Spec Leads.  Spec Leads are key to the Java Community Process (JCP) program. Without them, none of the Java Specification Requests (JSRs) would have begun, much less completed and become implemented in shipping products.  Nominations for 2012 Start Spec Leads are now open until 31 December. The Star Spec Lead program recognizes Spec Leads who have repeatedly proven their merit by producing high quality specifications, establishing best practices, and mentoring others. The point of such honor is to endorse the good work that they do, showcase their methods for other Spec Leads to emulate, and motivate other JCP program members and participants to get involved in the JCP program. Ed Burns – A Star Spec Lead for 2009, Ed first got involved with the JCP program when he became co-Spec Lead of JSR 127, JavaServer Faces (JSF), a role he has continued through JSF 1.2 and now JSF 2.0, which is JSR 314. Linda DeMichiel – Linda thus involved in the JCP program from its very early days. She has been the Spec Lead on at least three JSRs and an EC member for another three. She holds a Ph.D. in Computer Science from Stanford University. Gavin King – Nominated as a JCP Outstanding Spec Lead for 2010, for his work with JSR 299. His endorsement said, “He was not only able to work through disputes and objections to the evolving programming model, but he resolved them into solutions that were more technically sound, and which gained support of its pundits.” Mike Milikich –  Nominated for his work on Java Micro Edition (ME) standards, implementations, tools, and Technology Compatibility Kits (TCKs), Mike was a 2009 Star Spec Lead for JSR 271, Mobile Information Device Profile 3. David Nuescheler – Serving as the CTO for Day Software, acquired by Adobe Systems, David has been a key player in the growth of the company’s global content management solution. In 2002, he became Spec Lead for JSR 170, Content Repository for Java Technology API, continuing for the subsequent version, JSR 283. Bill Shannon – A well-respected name in the Java community, Bill came to Oracle from Sun as a Distinguished Engineer and is still performing at full speed as Spec Lead for JSR 342, Java EE 7,  as an alternate EC member, and hands-on problem solver for the Java community as a whole. Jim Van Peursem – Jim holds a PhD in Computer Engineering. He was part of the Motorola team that worked with Sun labs on the Spotless VM that became the KVM. From within Motorola, Jim has been responsible for many aspects of Java technology deployment, from an independent Connected Limited Device Configuration (CLDC) and Mobile Information Device Profile (MIDP) implementations, to handset development, to working with the industry in defining many related standards. Participation in the JCP Program goes well beyond technical proficiency. The JCP Awards Program is an attempt to say “Thank You” to all of the JCP members, Expert Group Members, Spec Leads, and EC members who give their time to contribute to the evolution of Java technology.

  Read the article

• Part 7: EBS Modifications and Flagged Files in R12

  - by volker.eckardt(at)oracle.com

  Let me, based on my previous blog, explain the procedure of flagged files a bit better and facilitate the same with screenshots. Flagged files is a concept within the Oracle eBusiness Suite (EBS) release 12, where you flag a standard deployment file, let’s say a Forms file, a Package or a Java class file. When you run the patch analyse, the list of flagged files will be checked and in case one of these files gets patched, the analyse report will tell you. Note: This functionality is also available in release 11, here it is implemented and known as “applcust.txt”. You can flag as many files as you want, in whatever relationship they are with your customizations. In addition to the flag itself you can add a comment. You should use this comment to point to your customization reference (here XXAR_RPT_066 or XXAP_CUST_030). Consider the following two cases: You have created your own report, based on a standard report. In this case you will flag the report file itself, and the key views used. When a patch updates one of these files, you will be informed and can initiate a proper review and testing. (ex.: first line for ARXCTA.rdf) You have created an extensive personalization and because it is business critical you like to be informed if the page definition gets updated. In this case you register the PG.xml file as flagged file. (ex.: second line below for CreateExtBankAcctPG.xml) The menu path to register flagged files is the following: (R) System Administrator > (M) Oracle Applications Manager > Site Map > Maintenance > Register Flagged Files     Your DBA should now run the Patch Analyse every time he is going to apply a new patch. (R) System Administrator > (M) Oracle Applications Manager > Patch Wizard > Task “Recommend/Analyze Patches” The screenshot above shows the impact summary. For this blog entry the number “2” titled “Flagged Files Changed“ is in our focus. When you click the “2” you will get a similar screen like the first in this blog, showing you exactly the files which will get patched if you continue and apply this patch in this environment right now. Note: It is also shown that just 20% of all patch files will get applied. This situation might be different in case your environments are on a different patch level. For sure also the customization impact might then be different. The flagging step can be done directly in the Oracle Applications Manager.  Our developers are responsible for. To transport such a flag+comment we use a FNDLOAD script. It is suggested to put the flagged files data file directly into your CEMLI patch. Herewith the flagged files registration will be executed right at the same time when the patch gets applied. Process Steps: Developer: Builds CEMLI Reviews code and identifies key standard objects referenced Determines standard object files and flags them Creates FNDLOAD file and adds the same to the CEMLI patch DBA: Executes for every new Oracle standard patch the patch analyse in a representative environment Checks and retrieves the flagged files and comments Sends flagged file list back to development team for analyse / retest Developer: Analyses / Updates / Retests effected CEMLIs Prerequisite: The patch analyse has to be executed in an environment where flagged files have been registered. (If you run the patch analyse in a vanilla or outdated environment (compared to your PROD), the analyse will not be so helpful!) When to start with Flagged files? Start right now utilizing this feature. It is an invest to improve the production stability and fulfil your SLA!   Summary Flagged Files is a very helpful EBS R12 technique when analysing patches. Implement a procedure within your development process to maintain such flags. Let the DBA run the patch analyse in an environment with a similar patch and customization level as your current production.   Related Links: EBS Patching Procedures - Chapter 2-13 - Registered Flagged Files

  Read the article

• Creating a new naming context in OUD

  - by Sylvain Duloutre

  A naming context (also known as a directory suffix) is a DN that identifies the top entry in a locally held directory hierarchy. A new naming context can be created using ODSM, the OUD gui admin console, as described in http://docs.oracle.com/cd/E29407_01/admin.111200/e22648/server_config.htm#CBDGCJGF It can also be created using the dsconfig command lione as described below: Creation of a new naming context consists in 3 steps: First create a Local Backend Workflow element (myNewDb in this exemple) ,  responsible for the naming context base dn, e.g o=example. dsconfig create-workflow-element \           --set base-dn:o=example \           --set enabled:true \           --type db-local-backend \           --element-name myNewDb \           --hostname <your host> \           --port <admin port> \           --bindDN cn=Directory\ Manager \           --bindPasswordFile ****** \           --no-prompt Second, create a Workflow element (workFlowForMyNewDb in this exemple) associated with the Local Backend Workflow element. WorkFlow elements are used to route LDAP requests to the appropriate database, based on the target base dn. dsconfig create-workflow \           --set base-dn:o=example \           --set enabled:true \           --set workflow-element:myNewDb \           --type generic \           --workflow-name workFlowForMyNewDb \           --hostname <your host name> \           --port <admin port>\           --bindDN cn=Directory\ Manager \           --bindPasswordFile ****** \           --no-prompt Then, the workflow element must be made visible outside of the directory, i.e added to the internal "routing table". This is done by adding the Workflow to the appropriate Network Group. A Network group  is used to classify incoming client connections and route requests to workflows. dsconfig set-network-group-prop \           --group-name network-group \           --add workflow:workFlowForMyNewDb \           --hostname <your hostname> \           --port <admin port>\           --bindDN cn=Directory\ Manager \           --bindPasswordFile ****** \           --no-prompt At that stage, it is possible to import entries to the new naming context o=example.

  Read the article

• Graduate Life in Oracle by Ramakrishna Nalabothula

  - by david.talamelli

  Preparation for the BIG interview: I prepared in both technical and logical aspects to face the Oracle Interview. I had to cover almost all main areas in technical and many types of problems in logical areas. We attended mock- interviews and written tests at our college, browsed websites and communities. Having started with such a rigorous preparation before Oracle visited the college; it was possible for me to make it into the list of final selection. I put in a big effort to reach this position and I am very happy to achieve this. Why I chose Oracle: Oracle is one of the best technology providers and has a large customer base. I think it is not an easy job to offer services to that many customers. So, the company needs young and dynamic people and I wanted to be one among them. This gave me spirit and led me to walk into Oracle. I am working on different technologies and learning something new in the field. Having many customers is challenging Oracle and my work is challenging me. I am confident enough that customers to both me and Oracle will never lose their faith. Learning at Oracle: The style of learning is good and never resembles a classroom session in a college. It is always fun to learn here. There is no exam to track the performance. There is enough time until we completely learn it. There is no concept of stiff competition. Peers help through KT (Knowledge Transfers) and there are good resources in the Oracle to learn. People are always there to direct you to those. There are lots of opportunities for Web learning too! My Work Area: My team gives me a great opportunity to offer service to the entire product. There were no situations when I got tense with my work or targets and deliverables. I work with a Global Team and my manager is based in the UK. I have a lot of freedom and flexibility. I use the work from home option in case of any disturbances in the city or due to personal problems. I have a weekly meeting with my manager and use Instant Messenger for status updates. My manager plans very well to give me enough time to complete tasks. I have good coordination from the team towards our deadlines. My work has also brought me close to many people across various technology and product teams. I am glad to make many friends across Oracle. I am enjoying my time and work here. I cover all the major activities in the team. I am thankful to everyone from the Development and Quality Assurance Team to have high confidence in me by assigning such big responsibilities. Primary tasks are maintaining the environments that are very unstable at times. This really requires big time and effort to trace the root causes. I am working and still learning on all these areas. The happiest thing is I got chances to travel to USA & UK for training and for supporting a few customer demo projects. I have got to explore more across two countries and got sponsored to visit the places around due to Oracle's policies. I am very much thankful for these what I have from Oracle and for the cooperation there from other colleagues. Fun at Work: Oracle has a club from Employees to conduct games and events. I had an opportunity to participate in competitions, tournaments inside Oracle and Inter-Corporate for all games. I thank Oracle for providing me all these opportunities and I would like to extend my thanks to Senior Management for their confidence in me. I thank Oracle HR Recruiting Team too for selecting me into Oracle and giving me this opportunity to share my experience and feelings. Ramakrishna Nalabothula

  Read the article

• ArchBeat Link-o-Rama Top 10 for December 9-15, 2012

  - by Bob Rhubart

  You click, we listen. The following list reflects the Top 10 most popular items posted on the OTN ArchBeat Facefbook page for the week of December 9-15, 2012. DevOps Basics II: What is Listening on Open Ports and Files – WebLogic Essentials | Dr. Frank Munz "Can you easily find out which WebLogic servers are listening to which port numbers and addresses?" asks Dr. Frank Munz. The good doctor has an answer—and a tech tip. Using OBIEE against Transactional Schemas Part 4: Complex Dimensions | Stewart Bryson "Another important entity for reporting in the Customer Tracking application is the Contact entity," says Stewart Bryson. "At first glance, it might seem that we should simply build another dimension called Dim – Contact, and use analyses to combine our Customer and Contact dimensions along with our Activity fact table to analyze Customer and Contact behavior." SOA 11g Technology Adapters – ECID Propagation | Greg Mally "Many SOA Suite 11g deployments include the use of the technology adapters for various activities including integration with FTP, database, and files to name a few," says Oracle Fusion Middleware A-Team member Greg Mally. "Although the integrations with these adapters are easy and feature rich, there can be some challenges from the operations perspective." Greg's post focuses on technical tips for dealing with one of these challenges. Podcast: DevOps and Continuous Integration In Part 1 of a 3-part program, panelists Tim Hall (Senior Director of product management for Oracle Enterprise Repository and Oracle’s Application Integration Architecture), Robert Wunderlich (Principal Product Manager for Oracle’s Application Integration Architecture Foundation Pack) and Peter Belknap (Director of product management for Oracle SOA Integration) discuss why DevOps matters and how it changes development methodologies and organizational structure. Good To Know - Conflicting View Objects and Shared Entity | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis shares his thoughts -- and a sample application -- dealing with an "interesting ADF behavior" encountered over the weekend. Cloud Deployment Models | B. R. Clouse Looking out for the cloud newbies... "As the cloud paradigm grows in depth and breadth, more readers are approaching the topic for the first time, or from a new perspective," says B. R. Clouse. "This blog is a basic review of cloud deployment models, to help orient newcomers and neophytes." Service governance morphs into cloud API management | David Linthicum "When building and using clouds, the ability to manage APIs or services is the single most important item you can provide to ensure the success of the project," says David Linthicum. "But most organizations driving a cloud project for the first time have no experience handling a service-based architecture and don't see the need for API management until after deployment. By then, it's too late." Oracle Fusion Middleware Security: Password Policy in OAM 11g R2 | Rob Otto Rob Otto continues the Oracle Fusion Middleware A-Team "Oracle Access Manager Academy" series with a detailed look at OAM's ability to support "a subset of password management processes without the need to use Oracle Identity Manager and LDAP Sync." Understanding the JSF Lifecycle and ADF Optimized Lifecycle | Steven Davelaar Could you call that a surprise ending? Oracle WebCenter & ADF Architecture Team (A-Team) member learned a lot more than he expected while creating a UKOUG presentation entitled "What you need to know about JSF to be succesful with ADF." Expanding on requestaudit - Tracing who is doing what...and for how long | Kyle Hatlestad "One of the most helpful tracing sections in WebCenter Content (and one that is on by default) is the requestaudit tracing," says Oracle Fusion Middleware A-Team architect Kyle Hatlestad. Get up close and technical in his post. Thought for the Day "There is no code so big, twisted, or complex that maintenance can't make it worse." — Gerald Weinberg Source: SoftwareQuotes.com

  Read the article

• Why I Love the Social Management Platform I Use

  - by Mike Stiles

  Not long ago, I asked the product heads for the various components of the Oracle Social Cloud’s SRM to say what they thought was coolest about their component. And while they did a fine job, it was recently pointed out to me that no one around here uses the platform in a real-world setting more than I do, as I not only blog and podcast my brains out, I also run Oracle Social’s own social properties. Of course I’m pro-Oracle Social’s product. Duh. But if you can get around immediately writing this off as a puff piece, there are real reasons beyond my employment that the Oracle SRM works for me as a community manager. If it didn’t, I could have simply written about something else, like how people love smartphones or something genius like that. Post Grid I like seeing what I want to see. I’m difficult that way. Post grid lets me see all posts for all channels, with custom columns showing me how posts are doing. I can filter the grid by social channel, published, scheduled, draft, suggested, etc. Then there’s a pullout side panel that shows me post details, including engagement analytics. From the pullout, I can preview the post, do a quick edit, a full edit, or (my favorite) copy a post so I can edit it and schedule it for other times so I don’t have to repeat from scratch. I’m not lazy, just time conscious. The Post Creation Environment Given our post volume, I need this to be as easy as it can be. I can highlight which streams I want the post to go out on, edit for the individual streams, maintain a media library that’s easy to upload to and attach from, tag posts, insert links that auto-shorten to an orac.le shortlink, schedule with a nice calendar visual, geo-target, drop photos inline into Twitter, and review each post. Watching My Channels The Engage component of the Oracle SRM brings in and drops into a grid the activity that’s happening on all my channels. I keep this open round-the-clock. Again, I get to see only what I want; social network, stream, unread messages, engagement by how I labeled them, and date range. I can bring up a post with a click, reply, label it, retweet it, assign it, delete it, archive it, etc. So don’t bother trying to be a troll on my channels. Analytics Social publishing and engaging 24/7 would be pretty unrewarding if I couldn’t see how our audience was responding. Frankly, I get more analytics than I know what to do with (I’m a content creator, not a data analyst). But I do know what numbers I care about, and they’re available by channel, date range, and campaigns. I’m seeing fan count, sources and demographics. I’m seeing engagement, what kinds of posts are getting engagement, and top engagers. I’m seeing my reach, both organic and paid. I’m seeing how individual posts performed in terms of engagement and virality, and posting time/date insight. Have I covered all the value propositions? I’ve covered pathetically few of them. It would be impossible in blog length to give shout-outs to the vast number of features and functionalities. From organizing teams and managing permissions with Workflow to the powerful ability to monitor topics (and your competition) across the web in Listen, it’s a major, and increasingly necessary, weapon in your social marketing arsenal. The life of a Community Manager is not for everybody. So if the Oracle SRM can actually make a Community Manager’s life easier, what’s not to love? I invite you to take a look at and participate in our Oracle Social Cloud social channels! Facebook Twitter YouTube Google Plus LinkedIn Daily Podcast on iHeartRadio @mikestiles @oraclesocial Photo: freeimages.com

  Read the article

• Sparse virtual machine disk image resizing weirdness?

  - by Matt H

  I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

  Read the article

• Best Practices - Core allocation

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 7-13, 2012

  - by Bob Rhubart

  The Top 10 items shared via the OTN ArchBeat Facebook page for the week of October 7-13, 2012. OOW12: Oracle Business Process Management/Oracle ADF Integration Best Practices | Andrejus Baranovskis The Oracle OpenWorld presentations keep coming! Oracle ACE Director Andrejus Baranovskis shares the slides from "Oracle Business Process Management/Oracle ADF Integration Best Practices," co-presented with Danilo Schmiedel from Opitz Consulting. Oracle's Analytics, Engineered Systems, and Big Data Strategy | Mark Rittman Part 1 of 3 in Oracle ACE Director Mark Rittman's series on Oracle Exalytics, Oracle R Enterprise and Endeca. Adaptive ADF/WebCenter template for the iPad | Maiko Rocha Oracle Fusion Middleware A-Team member Maiko Rocha responds to a a customer request for information about how to create an adaptive iPad template for their WebCenter Portal application, "a specific template to streamline their workflow on the iPad." Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. WebCenter Sites Gadget Development Concepts Quickstart | John Brunswick What are Gadgets? "At their most basic level they can be thought of as lightweight portlets that run largely on the client side of an architecture," says John Brunswick. "Gadgets provide a cross-platform container to run reusable UI modules that generally expose dynamic information to an end user, allowing for some level of end user customization." Oracle Fusion Middleware Security: OAM and OIM 11g Academies Looking for technical how-to content covering Oracle Access Manager and Oracle Identity Manager? The people behind the Oracle Middleware Security blog have indexed relevant blog posts into what they call Academies. "These indexes contain the articles we've written that we believe provide long lasting guidance on OAM and OIM. Posts covered in these series include articles on key aspects of OAM and OIM 11g, best practice architectural guidance, integrations, and customizations." Fusion Applications Technical Tips | Naveen Nahata "Setting memory parameters for Admin and Managed servers of various domains in Fusion Applications can be, let us say, a little daunting," says Oracle Fusion Middleware A-Team member Naveen Nahata. "While all this may look complicated and intimidating, it is actually relatively simple once you understand how it all works." Updated Agenda for OTN Architect Day Los Angeles (Oct 25) In less than two weeks Oracle Architect Day rolls into Los Angeles, with a full slate of sessions devoted to cloud computing, engineered systems, and SOA. Follow the link for the updated event agenda. ORCLville: OOW 2012 - A Not So Brief Recap Oracle ACE Director Floyd Teter, an Applications & Apps Technology specialists, shares his personal, frank, and and extensive recap or Oracle OpenWorld 2012. SOA Suite create partition in Enterprise Manager | Peter Paul van de Beek "In Oracle SOA Suite 10g, or more specific BPEL 10g, one could group functionality in domains," says Peter Paul van de Beek. "This feature has been away in the early versions of SOA Suite 11g. They have returned in more recent version and can be used for all SCA composites (instead of BPEL only). Nowadays these 10g domains are called partitions." Thought for the Day "I strive for an architecture from which nothing can be taken away." — Helmut Jahn Source: BrainyQuote.com

  Read the article

• How to Speed Up Any Android Phone By Disabling Animations

  - by Chris Hoffman

  Android phones — and tablets, too — display animations when moving between apps and screens. These animations look very slick, but they waste time — especially on fast phones, which could switch between apps instantly if not for the animations. Disabling these animations will speed up navigating between different apps and interface screens on your phone, saving you time. You can also speed up the animations if you’d rather see them. Access the Developer Options Menu First, we’ll need to access the Developer Options menu. It’s hidden by default so Android users won’t stumble across it unless they’re actually looking for it. To access the Developer Options menu, open the Settings screen, scroll down to the bottom of the list, and tap the About phone or About tablet option. Scroll down to the Build number field and tap it repeatedly. Eventually, you’ll see a message appear saying “You are now a developer!”. The Developer options submenu now appears on the Settings screen. You’ll find it near the bottom of the list, just above the About phone or About tablet option. Disable Interface Animations Open the Developer Options screen and slide the switch at the top of the screen to On. This allows you to change the hidden options on this screen. If you ever want to re-enable the animations and revert your changes, all you have to do is slide the Developer Options switch back to Off. Scroll down to the Drawing section. You’ll find the three options we want here — Window animation scale, Transition animation scale, and Animator duration scale. Tap each option and set it to Animation off to disable the associated animations. If you’d like to speed up the animations without disabling them entirely, select the Animation .5x option instead. If you’re feeling really crazy, you can even select longer animation durations. You can make the animations take as much as ten times longer with the Animation 10x setting. The Animator duration scale option applies to the transition animation that appears when you tap the app drawer button on your home screen.  Your change here won’t take effect immediately — you’ll have to restart Android’s launcher after changing the Animator duration scale setting. To restart Android’s launcher, open the Settings screen, tap Apps, swipe over to the All category, scroll down, and tap the Launcher app. Tap the Force stop button to forcibly close the launcher, then tap your device’s home button to re-launch the launcher. Your app drawer will now open immediately, too. Now whenever you open an app or transition to a new screen, it will pop up as quickly as possible — no waiting for animations and wasting processing power rendering them. How much of a speed improvement you’ll see here depends on your Android device and how fast it is. On our Nexus 4, this change makes many apps appear and become usable instantly if they’re running in the background. If you have a slower device, you may have to wait a moment for apps to be usable. That’s one of the big reasons why Android and other operating systems use animations. Animations help paper over delays that can occur while the operating system loads the app.     

  Read the article

• Fresh Ubuntu Install - Grub not loading

  - by Ryan Sharp

  System Ubuntu 12.04 64-bit Windows 7 SP1 Samsung 64GB SSD - OS' Samsung 1TB HDD - Games, /Home, Swap WD 300'ishGB HDD - Backup Okay, so I'm very frustrated, so please excuse me if I miss anything out as my head is clouded by anger and impatience, etc. I'll try me best, though. First of all, I'll explain how I got to my predicament. I finally got my new SSD. I firstly installed Windows, which completed without a hitch. Afterwards, I tried to install Ubuntu, which failed several times due to problems irrelevant to this question, but I mention this to explain my frustrations, sorry. Anyway, I finally installed Ubuntu. However, I chose the 'bootloader' to be installed on the same partition as where I was installing the Ubuntu Root partition, as that was what I believed to be the best choice. It was of my thinking that it was supposed to go on the same partition and on the SSD, which is my OS drive, though with my problem, it apparently was wrong. So I tried to fix it by checking guides and following their directions, but seemed to have messed it up even more. Here is what I receive after I use the fdisk -l command: (I also added explanations for which I used each partition for) Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 48959486 125044735 38042625 5 Extended /dev/sda5 48959488 125044735 38042624 83 Linux sda1 --/ Windows Recovery sda2 --/ Windows 7 sda3/5 --/ Ubuntu root [ / ] Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1939851263 457821184 83 Linux /dev/sdb6 1939853312 1953523711 6835200 82 Linux swap / Solaris sdb3 --/ Partition for Steam games, etc. sdb5 --/ Ubuntu Home [ /home ] sdb6 --/ Ubuntu Swap Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT sdc1 --/ Generic backup I also used a Boot Script that other users suggested, so that I can give more details on my partitions and also where Grub is located... ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. Now that is weird... Why would Grub2 be installed on both my SSD and HDD? Even weirder is why is Windows on the MBR of my backup hard drive? Nothing I did should have done that... Anyway, here is the entire Output from that script... PASTEBIN So, to summarize what I need: How can I fix my setup so grub loads on startup? How can I clean my partitions to remove unnecessary grubs? What did I do wrong so that I don't do something so daft again? Thank you so much for reading, and I hope you can help me. I've been trying to have a successful setup since Friday, and I'm almost at the point that I'm really tempted to throw my computer out the window due to my frustration.

  Read the article

• WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

  - by el10780

  After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

  Read the article

• 3 Incredibly Useful Projects to jump-start your Kinect Development.

  - by mbcrump

  I’ve been playing with the Kinect SDK Beta for the past few days and have noticed a few projects on CodePlex worth checking out. I decided to blog about them to help spread awareness. If you want to learn more about Kinect SDK then you check out my”Busy Developer’s Guide to the Kinect SDK Beta”. Let’s get started:   KinectContrib is a set of VS2010 Templates that will help you get started building a Kinect project very quickly. Once you have it installed you will have the option to select the following Templates: KinectDepth KinectSkeleton KinectVideo Please note that KinectContrib requires the Kinect for Windows SDK beta to be installed. Kinect Templates after installing the Template Pack. The reference to Microsoft.Research.Kinect is added automatically.  Here is a sample of the code for the MainWindow.xaml in the “Video” template: <Window x:Class="KinectVideoApplication1.MainWindow" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="480" Width="640"> <Grid> <Image Name="videoImage"/> </Grid> </Window> and MainWindow.xaml.cs using System; using System.Windows; using System.Windows.Media; using System.Windows.Media.Imaging; using Microsoft.Research.Kinect.Nui; namespace KinectVideoApplication1 { public partial class MainWindow : Window { //Instantiate the Kinect runtime. Required to initialize the device. //IMPORTANT NOTE: You can pass the device ID here, in case more than one Kinect device is connected. Runtime runtime = new Runtime(); public MainWindow() { InitializeComponent(); //Runtime initialization is handled when the window is opened. When the window //is closed, the runtime MUST be unitialized. this.Loaded += new RoutedEventHandler(MainWindow_Loaded); this.Unloaded += new RoutedEventHandler(MainWindow_Unloaded); //Handle the content obtained from the video camera, once received. runtime.VideoFrameReady += new EventHandler<Microsoft.Research.Kinect.Nui.ImageFrameReadyEventArgs>(runtime_VideoFrameReady); } void MainWindow_Unloaded(object sender, RoutedEventArgs e) { runtime.Uninitialize(); } void MainWindow_Loaded(object sender, RoutedEventArgs e) { //Since only a color video stream is needed, RuntimeOptions.UseColor is used. runtime.Initialize(Microsoft.Research.Kinect.Nui.RuntimeOptions.UseColor); //You can adjust the resolution here. runtime.VideoStream.Open(ImageStreamType.Video, 2, ImageResolution.Resolution640x480, ImageType.Color); } void runtime_VideoFrameReady(object sender, Microsoft.Research.Kinect.Nui.ImageFrameReadyEventArgs e) { PlanarImage image = e.ImageFrame.Image; BitmapSource source = BitmapSource.Create(image.Width, image.Height, 96, 96, PixelFormats.Bgr32, null, image.Bits, image.Width * image.BytesPerPixel); videoImage.Source = source; } } } You will find this template pack is very handy especially for those new to Kinect Development.   Next up is The Coding4Fun Kinect Toolkit which contains extension methods and a WPF control to help you develop with the Kinect SDK. After downloading the package simply add a reference to the .dll using either the WPF or WinForms version. Now you will have access to several methods that can help you save an image: (for example) For a full list of extension methods and properties, please visit the site at http://c4fkinect.codeplex.com/. Kinductor – This is a great application for just learning how to use the Kinect SDK. The project uses MVVM Light and is a great start for those looking how to structure their first Kinect Application. Conclusion: Things are already getting easier for those working with the Kinect SDK. I imagine that after a few more months we will see the SDK go out of beta and allow commercial applications to run using it. I am very excited and hope that you continue reading my blog for more Kinect, WPF and Silverlight news.  Subscribe to my feed

  Read the article

• SPTI problem with Mode Select

  - by Bob Murphy

  I'm running into a problem in which an attempt to do a "Mode Select" SCSI command using SPTI is returning an error status of 0x02 ("Check Condition"), and hope someone here might have some tips or suggestions. The code in question is intended to work with at a custom SCSI device. I wrote the original support for it using ASPI under WinXP, and am converting it to work with SPTI under 64-bit Windows 7. Here's the problematic code - and what's happening is, sptwb.spt.ScsiStatus is 2, which is a "Check Condition" error. Unfortunately, the device in question doesn't return useful information when you do a "Request Sense" after this problem occurs, so that's no help. void MSSModeSelect(const ModeSelectRequestPacket& inRequest, StatusResponsePacket& outResponse) { IPC_LOG("MSSModeSelect(): PathID=%d, TargetID=%d, LUN=%d", inRequest.m_Device.m_PathId, inRequest.m_Device.m_TargetId, inRequest.m_Device.m_Lun); int adapterIndex = inRequest.m_Device.m_PathId; HANDLE adapterHandle = prvOpenScsiAdapter(inRequest.m_Device.m_PathId); if (adapterHandle == INVALID_HANDLE_VALUE) { outResponse.m_Status = eScsiAdapterErr; return; } SCSI_PASS_THROUGH_WITH_BUFFERS sptwb; memset(&sptwb, 0, sizeof(sptwb)); #define MODESELECT_BUF_SIZE 32 sptwb.spt.Length = sizeof(SCSI_PASS_THROUGH); sptwb.spt.PathId = inRequest.m_Device.m_PathId; sptwb.spt.TargetId = inRequest.m_Device.m_TargetId; sptwb.spt.Lun = inRequest.m_Device.m_Lun; sptwb.spt.CdbLength = CDB6GENERIC_LENGTH; sptwb.spt.SenseInfoLength = 0; sptwb.spt.DataIn = SCSI_IOCTL_DATA_IN; sptwb.spt.DataTransferLength = MODESELECT_BUF_SIZE; sptwb.spt.TimeOutValue = 2; sptwb.spt.DataBufferOffset = offsetof(SCSI_PASS_THROUGH_WITH_BUFFERS,ucDataBuf); sptwb.spt.Cdb[0] = SCSIOP_MODE_SELECT; sptwb.spt.Cdb[4] = MODESELECT_BUF_SIZE; DWORD length = offsetof(SCSI_PASS_THROUGH_WITH_BUFFERS,ucDataBuf) + sptwb.spt.DataTransferLength; memset(sptwb.ucDataBuf, 0, sizeof(sptwb.ucDataBuf)); sptwb.ucDataBuf[2] = 0x10; sptwb.ucDataBuf[16] = (BYTE)0x01; ULONG bytesReturned = 0; BOOL okay = DeviceIoControl(adapterHandle, IOCTL_SCSI_PASS_THROUGH, &sptwb, sizeof(SCSI_PASS_THROUGH), &sptwb, length, &bytesReturned, FALSE); DWORD gle = GetLastError(); IPC_LOG(" DeviceIoControl() %s", okay ? "worked" : "failed"); if (okay) { outResponse.m_Status = (sptwb.spt.ScsiStatus == 0) ? eOk : ePrinterStatusErr; } else { outResponse.m_Status = eScsiPermissionsErr; } CloseHandle(adapterHandle); } A few more remarks, for what it's worth: This is derived from some old ASPI code that does the "Mode Select" flawlessly. This routine opens \\.\SCSI<whatever> at the beginning, via prvOpenScsiAdapter(), and closes the handle at the end. All the other routines for dealing with the device do the same thing, including the routine to do "Reserve Unit". Is this a good idea under SPTI, or should the call to "Reserve Unit" leave the handle open, so this routine and others in the sequence can use the same handle? This uses the IOCTL_SCSI_PASS_THROUGH. Should "Mode Select" use IOCTL_SCSI_PASS_THROUGH_DIRECT instead? Thanks in advance - any help will be greatly appreciated.

  Read the article

• Successfully Deliver on State and Local Capital Projects through Project Portfolio Management

  - by Sylvie MacKenzie, PMP

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} While the debate continues on Capitol Hill about which federal programs to cut and which to keep, communities and towns across America are feeling the budget crunch closer to home. State and local governments are trying to save as many projects as they can without promising too much to constituents – and they, in turn, want to know where their tax dollars are going. Fortunately, with the right planning and management, you can deliver successful projects and portfolios on a limited budget. Watch the replay of our recent webcast with Oracle Primavera and Industry Product Manager Garrett Harley that will demonstrate how state and local governments can get the most out of their capital projects and learn how two Oracle Primavera customers have implemented project portfolio management practices to: Predict the cost of long-term capital programs and projects Assess risk and mitigation strategies Collaborate and track performance across government agencies Speakers: Garrett Harley, Industry and Product Manager, Oracle Primavera Cory Davis, Director of Capital Renovation and New Construction, Chicago Public Schools Julie Owen, PSP™, CCC™, Sr. Project Controls Manager,LA Metro Transit Authority With the right planning and management, state and local governments can deliver successful projects on a limited budget. 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• Internet of Things Becoming Reality

  - by kristin.jellison

  The Internet of Things is not just on the radar—it’s becoming a reality. A globally connected continuum of devices and objects will unleash untold possibilities for businesses and the people they touch. But the “things” are only a small part of a much larger, integrated architecture. A great example of this comes from the healthcare industry. Imagine an expectant mother who needs to watch her blood pressure. She lives in a mountain village 100 miles away from medical attention. Luckily, she can use a small “wearable” device to monitor her status and wirelessly transmit the information to a healthcare hub in her village. Now, say the healthcare hub identifies that the expectant mother’s blood pressure is dangerously high. It sends a real-time alert to the patient’s wearable device, advising her to contact her doctor. It also pushes an alert with the patient’s historical data to the doctor’s tablet PC. He inserts a smart security card into the tablet to verify his identity. This ensures that only the right people have access to the patient’s data. Then, comparing the new data with the patient’s medical history, the doctor decides she needs urgent medical attention. GPS tracking devices on ambulances in the field identify and dispatch the closest one available. An alert also goes to the closest hospital with the necessary facilities. It sends real-time information on her condition directly from the ambulance. So when she arrives, they already have a treatment plan in place to ensure she gets the right care. The Internet of Things makes a huge difference for the patient. She receives personalized and responsive healthcare. But this technology also helps the businesses involved. The healthcare provider achieves a competitive advantage in its services. The hospital benefits from cost savings through more accurate treatment and better application of services. All of this, in turn, translates into savings on insurance claims. This is an ideal scenario for the Internet of Things—when all the devices integrate easily and when the relevant organizations have all the right systems in place. But in reality, that can be difficult to achieve. Core design principles are required to make the whole system work. Open standards allow these systems to talk to each other. Integrated security protects personal, financial, commercial and regulatory information. A reliable and highly available systems infrastructure is necessary to keep these systems running 24/7. If this system were just made up of separate components, it would be prohibitively complex and expensive for almost any organization. The solution is integration, and Oracle is leading the way. We’re developing converged solutions, not just from device to datacenter, but across devices, utilizing the Java platform, and through data acquisition and management, integration, analytics, security and decision-making. The Internet of Things (IoT) requires the predictable action and interaction of a potentially endless number of components. It’s in that convergence that the true value of the Internet of Things emerges. Partners who take the comprehensive view and choose to engage with the Internet of Things as a fully integrated platform stand to gain the most from the Internet of Things’ many opportunities. To discover what else Oracle is doing to connect the world, read about Oracle’s Internet of Things Platform. Learn how you can get involved as a partner by checking out the Oracle Java Knowledge Zone. Best regards, David Hicks

  Read the article

• A .NET Developers day with the iPad.

  - by mbcrump

  The Apple iPad is currently getting a lot of buzz because of the app store, the book store and of course iTunes. I had the chance to play with one and this is what I have learned about the device. Let’s get this out of the way first, the iPad is awesome. It is the device for media consumption and casual web browsing. But how does it measure up to those of us with .NET on our brains all days. Let’s find out… Main Screen – you can customize everything on this page. I guess I should replace that image with a C# or VS logo. Its pretty standard stuff if you have an iPhone.   Programming Books If you have a subscription to Safari Books Online, then you are in luck, its very easy to read the books on the iPad. Just fire up Safari web browser and goto the Safari Books Online. The biggest benefit that I can see with the iPad is the ability to read books wherever and not have to worry about purchasing books that I already have the .PDF for. Below is a sample from Code Complete 2nd Edition. Below is a PDF of the ECMA-334 C# Language Specification. As you can see its very readable and you should have no problem reading actual code.   Example of Code shown below: It is however easier to read the PDF and store them with a 3rd party PDF reader. I have seen several for .99 cents or less. You can however switch the screen to vertical to get more viewing space as shown below: I was disappointed with the iBooks application. I could not find a single .NET programming book anywhere. I was able to download the excellent sci-fi book “A memory of Wind” for free though. If I just overlooked them, then please email me with the names and titles. I couldn’t even find a technology category in the categories list. Web Surfing – Technical Sites Below is an example of my site in Safari. The code is very readable and the experience was identical to viewing it in Firefox. I tried multiple programming site and the pages looked great except those that used flash and of course it did not display on those pages.   News Apps - Technical Content The standard NY Times and USA Today looked great, but the Technical Content was lacking. It would probably be better to use Google Reader for online technical news.     YouTube Videos – Technical Content  Since its YouTube, we already know that a lot of technical content exist and it plays great on the iPad. I watched several programming videos and could clearly see the code being written. Taking Technical Notes The iPad comes with a great notepad for taking notes. I found that it was easy to take notes regarding projects that I am currently working on.   Calendar The calendar that ships with the iPad is great for organizing. You can setup exchange server or manually enter the information. Pretty standard stuff.    Random Applications that I like: TweetDeck.   and Adobe Ideas. Adobe Ideas is kinda like SketchFlow except you use your finger to mock up the sketches.  Don’t forget that the iPad is great for any type of podcasting. That pretty much sums it up, I would definitely recommend this device as it will only get better. I believe the iOS4 comes out on the 24th and the iPad will only get more and more apps. You could save a few bucks by waiting for the 2nd generation, but that’s a call that only you can make.

  Read the article

• Ops Center 12c - Update - Provisioning Solaris on x86 Using a Card-Based NIC

  - by scottdickson

  Last week, I posted a blog describing how to use Ops Center to provision Solaris over the network via a NIC on a card rather than the built-in NIC.  Really, that was all about how to install Solaris on a SPARC system.  This week, we'll look at how to do the same thing for an x86-based server. Really, the overall process is exactly the same, at least for Solaris 11, with only minor updates. We will focus on Solaris 11 for this blog.  Once I verify that the same approach works for Solaris 10, I will provide another update. Booting Solaris 11 on x86 Just as before, in order to configure the server for network boot across a card-based NIC, it is necessary to declare the asset to associate the additional MACs with the server.  You likely will need to access the server console via the ILOM to figure out the MAC and to get a good idea of the network instance number.  The simplest way to find both of these is to start a network boot using the desired NIC and see where it appears in the list of network interfaces and what MAC is used when it tries to boot.  Go to the ILOM for the server.  Reset the server and start the console.  When the BIOS loads, select the boot menu, usually with Ctrl-P.  This will give you a menu of devices to boot from, including all of the NICs.  Select the NIC you want to boot from.  Its position in the list is a good indication of what network number Solaris will give the device. In this case, we want to boot from the 5th interface (GB_4, net4).  Pick it and start the boot processes.  When it starts to boot, you will see the MAC address for the interface Once you have the network instance and the MAC, go through the same process of declaring the asset as in the SPARC case.  This associates the additional network interface with the server.. Creating an OS Provisioning Plan The simplest way to do the boot via an alternate interface on an x86 system is to do a manual boot.  Update the OS provisioning profile as in the SPARC case to reflect the fact that we are booting from a different interface.  Update, in this case, the network boot device to be GB_4/net4, or the device corresponding to your network instance number.  Configure the profile to support manual network boot by checking the box for manual boot in the OS Provisioning profile. Booting the System Once you have created a profile and plan to support booting from the additional NIC, we are ready to install the server. Again, from the ILOM, reset the system and start the console.  When the BIOS loads, select boot from the Boot Menu as above.  Select the network interface from the list as before and start the boot process.  When the grub bootloader loads, the default boot image is the Solaris Text Installer.  On the grub menu, select Automated Installer and Ops Center takes over from there. Lessons The key lesson from all of this is that Ops Center is a valuable tool for provisioning servers whether they are connected via built-in network interfaces or via high-speed NICs on cards.  This is great news for modern datacenters using converged network infrastructures.  The process works for both SPARC and x86 Solaris installations.  And it's easy and repeatable.

  Read the article

• Access Control Lists for Roles

  - by Kyle Hatlestad

  Back in an earlier post, I wrote about how to enable entity security (access control lists, aka ACLs) for UCM 11g PS3.  Well, there was actually an additional security option that was included in that release but not fully supported yet (only for Fusion Applications).  It's the ability to define Roles as ACLs to entities (documents and folders).  But now in PS5, this security option is now fully supported.   The benefit of defining Roles for ACLs is that those user roles come from the enterprise security directory (e.g. OID, Active Directory, etc) and thus the WebCenter Content administrator does not need to define them like they do with ACL Groups (Aliases).  So it's a bit of best of both worlds.  Users are managed through the LDAP repository and are automatically granted/denied access through their group membership which are mapped to Roles in WCC.  A different way to think about it is being able to add multiple Accounts to content items...which I often get asked about.  Because LDAP groups can map to Accounts, there has always been this association between the LDAP groups and access to the entity in WCC.  But that mapping had to define the specific level of access (RWDA) and you could only apply one Account per content item or folder.  With Roles for ACLs, it basically takes away both of those restrictions by allowing users to define more then one Role and define the level of access on-the-fly. To turn on ACLs for Roles, there is a component to enable.  On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top.   In the list of Disabled Components, enable the RoleEntityACL component. Then restart.  This is assuming the other configuration settings have been made for the other ACLs in the earlier post.   Once enabled, a new metadata field called xClbraRoleList will be created.  If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. For Users and Groups, these values are automatically picked up from the corresponding database tables.  In the case of Roles, there is an explicitly defined list of choices that are made available.  These values must match the roles that are coming from the enterprise security repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager.  On the Views tab, edit the values for the ExternalRolesView.  By default, 'guest' and 'authenticated' are added.  Once added, you can assign the roles to your content or folder. If you are a user that can both access the Security Group for that item and you belong to that particular Role, you now have access to that item.  If you don't belong to that Role, you won't! [Extra] Because the selection mechanism for the list is using a type-ahead field, users may not even know the possible choices to start typing to.  To help them, one thing you can add to the form is a placeholder field which offers the entire list of roles as an option list they can scroll through (assuming its a manageable size)  and view to know what to type to.  By being a placeholder field, it won't need to be added to the custom metadata database table or search engine.  

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >