Search Results

Search found 13788 results on 552 pages for 'instance'.

Page 282/552 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• How can I make Excel documents open in different windows?

  - by Eugene

  Office 2007, Windows Server 2008 x64. How can I make Excel so that when I double-click a document, it opens in a new Excel instance, so that I can easily view them side-by-side as separate windows and not using the View-Arrange All functionality? Now I have to go to the task bar, click on one document to see it and then click on the other document in the task bar to switch to that one. As the alternative, I close one document, open a new Excel window, then drag the document in there. Thank you.

  Read the article

• JiglibX addition to existing project questions

  - by SomeXnaChump

  Got a very simple existing project, that basically contains a lot of cubes. Now I am wanting to add a physics system to it and JiglibX seemed like the simplest one with some tutorials out there. My main problem is that the physics don't seem to be working how I imagined, I expected my tower of cubes to come crashing down, but they dont seem to do anything. I think my problem is that my cubes do not inherit DrawableGameComponent, they are managed by a world object that will update and render them. So they are at no point put into the games component list. I am not sure if this means that JiglibX will not be able to interact with them as in all the tutorials there are no explicit calls to add the Body objects to the physics system, so I can only presume that they are using a static/singleton under the hood which automatically hooks in all things, or they use the game objects component list somehow. I also noticed that in alot of the tutorials they use the following when setting up the physics system: float timeStep = (float)gameTime.ElapsedGameTime.Ticks / TimeSpan.TicksPerSecond; PhysicsSystem.CurrentPhysicsSystem.Integrate(timeStep); Would it not be better to keep a local instance of the created PhysicsSystem object and just call myPhysicsSystem.Integrate(timeStep)?

  Read the article

• Dim (NEARLY blank) laptop screen, secondary screen works - why?

  - by LIttle Ancient Forest Kami

  My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

  Read the article

• Installing DB2 in Windows 2003 Cluster

  - by radoslawc

  How can I install db2 with already created domain user? Or maybe there is no need, just install with local user db2admin and then create instance using existing domain user? This is how it looks I've got win 2003 cluster single quorum, I have to move db2 database to another cluster in same domain. I've added resources to new cluster like in IBM redbook, and I have problem adding db2 resource. I've got service account DOMAIN\serviceaccount and DOMAIN\db2_instance owner, to install db2 do I have to log in as db2_instance_owner? Thanks in advance

  Read the article

• xm console command is not working in XEN

  - by stillStudent

  I have XEN 4.0.x.x rpm with CENT OS. I have set it up and have many VMs on it. But problem is when I execute 'xm console ' command from dom0, command just hangs dom0 and some 'y' comes up in next line but nothing really happens. Is it a bug in xen 4.0 and I need to upgrade it or I can tweak some configuration file in /etc/xen/ to make it work. I found following at some site but its not working: In order to be able to login to your domU from the console using: xm create {your hostname}.cfg -c (to the set root password for ssh, for instance, or to see more output than just kernel output when debugging) it may be necessary to add the following line to your /etc/xen/{your hostname}.cfg extra='xencons=tty' Is there any other way to solve it?

  Read the article

• Unable to Uninstall Exchange 2010 ("Internet Newsgroups" public folder)

  - by helplessITguy

  I am trying to uninstall Exchange 2010, before installing a new instance of Exchange 2010 SP1 on a different server. (Our production Exchange server is 2003) We have met all of the Mailbox uninstall prereqs except for the following: Error: Uninstall cannot continue. Database 'Public Folder Database 1579722947': The public folder database "Public Folder Database 1579722947" contains folder replicas. Before deleting the public folder database, remove the folders or move the replicas to another public folder database. For detailed instructions about how to remove a public folder database, see http://go.microsoft.com/fwlink/?linkid=81409&clcid=0x409. Recommended Action: We have been able to delete all Public Folders in the 2010 storage group except for the one (previously replicated) folder - "Internet Newsgroups". How can I delete this folder without impacting public folders on the production Exchange 2003 server? We have: verified permissions to the public folder removed replication for the folder on (on the Exch 2010 server) tried PowerShell scripts: RemoveReplicaFromPFRecursive Get-PublicFolder -Server "\" -Recurse -ResultSize:Unlimited | Remove-PublicFolder -Server -Recurse -ErrorAction:SilentlyContinue

  Read the article

• Mail sent from local Postfix marked as "possible phishing" in Outlook

  - by leo grrr

  Hi folks, Sorry for the newbie question--this is not my area of expertise by a long shot. I work at a small development shop and we finally got around to doing code reviews. (Yay!) I set up an instance of Review Board -- an open-source code review tool -- on one of our local servers but it doesn't seem to like talking to our hosted Exchange server to send notification emails. I decided to just install Postfix on that same box and send mail from localhost, which is working much more reliably, but Outlook disables all links in the email announcements and marks it as possible phishing. What is making these emails look suspicious and what can I change? Would the best thing be to figure out how to relay to Exchange from Postfix? Thanks!

  Read the article

• AWS VPC - why have a private subnet at all?

  - by jkim

  In Amazon VPC, the VPC creation wizard allows one to create a single "public subnet" or have the wizard create a "public subnet" and a "private subnet". Initially, the public and private subnet option seemed good for security reasons, allowing webservers to be put in the public subnet and database servers to go in the private subnet. But I've since learned that EC2 instances in the public subnet are not reachable from the Internet unless you associate an Amazon ElasticIP with the EC2 instance. So it seems with just a single public subnet configuration, one could just opt to not associate an ElasticIP with the database servers and end up with the same sort of security. Can anyone explain the advantages of a public + private subnet configuration? Are the advantages of this config more to do with auto-scaling, or is it actually less secure to have a single public subnet?

  Read the article

• How do I list all the relation variables and debug them interactively?

  - by mfisch

  I'm writing a charm that requires a mysql database, I found from looking at other charms that this (below) is how I get the info about the database: user=`relation-get user` password=`relation-get password` mysqlhost=`relation-get private-address` But I just found that from reading the wordpress charm example, is there a way to show all the relation variables that I can use? Also, while debugging my db-relation-changed script, I wanted to ssh into my host and interactively run those commands, for example relation-get user, but it didn't work. I resorted to having to restart everything and use juju log to print them out. This wasted a lot of time. Is there a way to print out these relations, either from my dev box or from the instance running my charm? (Below is what happens when I tried to interactively run relation-get): ubuntu@mfisch-local-tracks-0:~$ relation-get user usage: relation-get [-h] [-o OUTPUT] [-s SOCKET] [--client-id CLIENT_ID] [--format FORMAT] [--log-file FILE] [--log-level CRITICAL|DEBUG|INFO|ERROR|WARNING] [-r RELATION ID] [settings_name] [unit_name] No JUJU_AGENT_SOCKET/-s option found I tried juju debug-hooks tracks/0 -e local, that dropped me into a shell and relation-get still failed.

  Read the article

• growing EBS RAID volume

  - by Ryan Fernandes

  I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. EDIT: trying to grow the RAID using mdadm --grow yields mdadm: raid0 array /dev/md0 cannot be reshaped Is there any other way I can grow a RAID0 array?

  Read the article

• What's the strengths and weaknesses of existing configuration management systems?

  - by Daniel C. Sobral

  I was looking up here for some comparisons between CFEngine, Puppet, Chef, bcfg2, AutomateIt and whatever other configuration management systems might be out there, and was very surprised I could find very little here on Server Fault. For instance, I only knew of the first three links above -- the other two I found on a related google search. So, I'm not interested in what people think is the best one, or which they like. I'd like to know the following: Configuration Management System's name. Why it was created (as opposed to using an existing solution). Relative strengths. Relative weaknesses. License. Link to project and examples.

  Read the article

• Apache httpd VirtualHost config - multiple sites

  - by DaFoot

  [Advised to post here from StackExchange] I have a site to work on, because of the way the URLs are built the application seems to have been created on the assumption that it will be at the server root (only app). On my dev server I have other projects and up to now a simple symlink has been working for me, but that's not the case now because this new app wants to sit at the route and process all URLs arriving on :80. Hopefully this snippet from httpd.conf will help explain what I'm trying to acheive: # default for any not matched elsewhere <VirtualHost *:80> ServerName localhost DocumentRoot /var/www/html/newproject </VirtualHost> # now try to pick out specific URLs <VirtualHost localhost/webdev> DocumentRoot /var/www/html/existingProject ServerName localhost/project </VirtualHost> Also need to be able to get same affect from wherever I'm accessing the httpd instance from. Hope that makes sense.

  Read the article

• Design help with parallel process

  - by brazc0re

  I am re-factoring some code and an having an issue with retrieving data from two parallel processes. I have an application that sends packets back and forth via different mediums (ex: RS232, TCP/IP, etc). The jist if of this question is that there are two parallel processes going on. I hope the picture below displays what is going on better than I can word it: SetupRS232() class creates a new instance of the SerialPort by: SerialPort serialPort = new SerialPort(); My question is, what is the best way that the Communicator() class, which sends out the packet via the respective medium, get access to the SerialPort object from the SetupRS232 class? I can do it with a Singleton but have heard that they are generally not the best design to go by. I am trying to follow SRP but I do feel like I am doing something wrong here. Communicator() will need to go out of it's way to get access to SetupRS232() to get access to the SerialPort class. I actually haven't found a way to even get access to it. Would designing each medium class, for example, SetupRS232(), SetupTCPIP, as a singleton be the best way to approach this problem?

  Read the article

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• What poor management decisions have you had to deal with?

  - by tombull89

  As a junior technician I've had to deal with (or will have to deal with) some problems in the past and only being a junior technician I don't have the confidence or respect from management staff to speak up. For instance, we're having a entirely new system. From Windows Server 2003/XP going to Windows Server 2008 R2/Windows 7/VMWare/Digital Signage and the current amount of time dedicated to the training of the IT support department currently stands at 0. They seem to think that all IT systems are the same and are going to get a bit of shock when I can't help them. I think there;s some UK legislation saying a school/business have to put money and time aside for training, but I'm not sure. What have you had to deal with?

  Read the article

• How to convince non-programmer his notions about computers are wrong?

  - by Suma

  Recently I came across a question about 64b on SuperUser for which the accepted answer seemed like a complete nonsense to me. I made two comments pointing out obvious mistakes. To my perplexion, the comments had an effect of the poster of the answer being alienated. I have no idea how could I convince him he is wrong, as he does not seem to understand the basics of the problem. He seems to be mixing concepts like bus size and address size - see the pearl sentence "it will allow you to address all of your RAM because your processor is reading from your RAM in 64 bit words.". The poster asks me to provide proves of my claim by quoting a respectable source, but I have no idea where to find such source, as I doubt anything I would consider relevant would be relevant for him (it would be probably too technical). I think this instance can serve as an illustration of communication problems between programmers and users (and to certain extent even to any expert vs. non-expert communication). How should a programmer handle a communication like this, so that is does not become a useless quarrel?

  Read the article

• Template syntax for users - is there a right way to do it?

  - by RickM

  Ok, I'm in the middle of building a saas system, and as part of that, the hosted clients need to be able to edit certain layout templates, baqsically just html, css and javascript files. I'm obviously going to be wanting to use a template syntax here as it would be dumb to let people execute PHP code, so in this instance template syntax does need to be used. I know that in the grand scale of things, this is a very minor thing, but what template syntax do you use, and why? Is there one that's considered better than others? I've seen all sorts being used with no real consistency, for example: Smarty Style: {$someVar} {foreach from="foo" item="bar"} {$bar.food} {/foreach} ASP Style: {% someVar %} {% foreach foo as bar %} {% bar.food %} {% endforeach %} HTML Style: <someVar> <foreach from="foo" item="bar"> <bar:food> </foreach> PyroCMS/FuelPHP "LEX" Style: {{ someVar }} {{ foreach from="foo" item="bar" }} {{ bar:food }} {{ endforeach }} Obviously these arent 100% accurate (for example, LEX is used alongside PHP for loops), and are only to give you an example of what I mean. What, in your opinion would be the best one (if any) to go with. I ask this bearing in mind that people using this are likely to be novice users. I did look around at a bunch of hosted CMS and E-Commerce systems as these seem to make use of user-editable templates, and most seem to be using some form of their own syntax. I should note that whatever style I end up going with, it will be with a custom template handler due to the complexity of the system and how template files are stored. Plus I'd not want to touch the likes of Smarty with a barge pole!

  Read the article

• Wine causes twin view to break

  - by deanvz

  I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Synchronisation software to find files that have moved paths within a folder?

  - by kpierce8

  Say I have a pictures folder which I reorganized on one computer. I'd like to use that directory as the base and compare it with another version on a backup drive. Will any Synchronisation/compare program find that a file in one folder has moved locations within a compare folder? For instance, say I reorganized my pictures from trips into folders by year with the trips folders inside each year folder. If I use a regular compare utility I wind up with two copies of everything that's moved in different locations.

  Read the article

• Interaction between two Clouds

  - by user7969

  I have setup the Cloud-A with 1 - [CLC+CC] and 2 - [NC] computers. I have another Cloud-B with same configuration. [using the Ubuntu Enterprise Cloud] Both of them working fine individually, in the same LAN. Now if I want to add the NC of Cloud-A to CC of Cloud-B, [in case the resources of Cloud-B are exhausted] how can I make it possible ? I guess this calls for the interoperability stuff... Could you please explain what happens exactly when we ask for instance, the direct interaction happens between the client and NC or it goes through the CLC and CC ? What I want to say is, say there are multiple cloud providers. A user is subscribed to any one of them, say Cloud-A for IaaS. As the requirements are dynamic, all the resources of Cloud-A may get exhausted. There may be another Cloud-B which can provide the services but that Cloud-A can't ask the client to go for Cloud-B. So if it is possible to have some co-ordination between this two providers to share resources mutually, making client fully unaware of whats going on in the background....? Please reply.. I am sorry if I'm doing mistake anywhere... Thanks in advance :)

  Read the article

• How much information can you mine out of a name?

  - by Finglas Fjorn

  While not directly related to programming, I figured that the programmers on here would be just as curious as I was about this question. Feel free to close the question if it does not meet with the guidelines. A name: first, possibly a middle, and surname. I'm curious about how much information you can mine out of a name, using publicly available datasets. I know that you can get the following with anywhere between a low-high probability (depending on the input) using US census data: 1) Gender. 2) Race. Facebook for instance, used exactly that to find out, with a decent level of accuracy, the racial distribution of users of their site (https://www.facebook.com/note.php?note_id=205925658858). What else can be mined? I'm not looking for anything specific, this is a very open-ended question to assuage my curiousity. My examples are US specific, so we'll assume that the name is the name of someone located in the US; but, if someone knows of publicly available datasets for other countries, I'm more than open to them too. I hope this is an interesting question!

  Read the article

• How do I prevent software packages from being downloaded until I know it's safe?

  - by Dave M G

  Recently, an update that caused a problem with Gnome session caused me to lose a day's work. The solution was to rollback some packages to a previous version. The update manager is now telling me that my old packages should be updated: ... but I don't want to do that until I know that whatever bug or problem the latest version has is resolved. I understand that with any upgrade that there is a risk of instability. However, in the 8 years or more that I've been on Ubuntu, using the latest releases has been stable enough and with the benefit of the latest features and security. So, I'm not looking for general advice on how to handle upgrades. What I'm saying is that in this one particular instance, the bug introduced by these upgrades is severe and time wasting. But, as an end user, when I encounter a problem like this, I have no idea how to address a specific concern about a specific package. I don't, for example, know which of these packages is the problem, and I can't take time from my work schedule to be experimenting with each package. So, my question is: How do I find out who exactly is responsible for these, or any, packages so that I can contact them and let them know about the problem? How do I freeze these packages only, but allow other upgrades to happen? ubuntu-session gnome-session-common gnome-session-bin gnome-session

  Read the article

• Taking over and Moving a PHP site

  - by KCavon

  I have a internal use PHP site at my new position. It only runs a few days a year off site so we keep it on laptops. The hardware it has been on, a 8 year IBM Thinkpad running Fedora, is dying. I have new Lenovo Thinkpad's running latest and greatest Ubuntu. I have copied the contents of var to a shared drive, renamed the old www folder in var on the new machine and copied over the old www folder. I can get to the login page and into the site, but when I look something up it returns Cannot Open. I know I cannot get to the MySQL in the new machine because users and passwords dont match. The version of the PHP from the old machine is before the setup script was included. I know very little about PHP. I am looking for input on the proper way to link the old PHP files to my mysql instance. Any help, much appreciated.

  Read the article

• Graphic Setup tune-up checklist

  - by Click Ok

  I was trying to play the game Warzone 2100 and the games runs fine, with nice speed, but the screen stays with a horizontal lines "flickering"... My PC have a integrated GeForce Go 6100 vga. Ok, not a powerfull vga, but it's not the end of the world to run a "simple" game like this (compared with another games that ask you send your eyes to purchase a expensive vga). So, I think that the problem can be of the configuration of my machine. I use it in first instance for programming jobs, so I underpay attention to video setup. I would like about a checklist to know if my PC is "ready" to games. By example, I know that I need: Lastest vga drivers Updated DirectX and OpenGL What you suggest? There is too some good programs to test performance and suggests improvements in the system? Thank you! PS: I'm using Windows 7

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >