Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 282/365 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• linux: disable using loopback and send data via wire between 2 eth cards of one comp

  - by osgx

  Hello I have a comp with 2 eth cards, connected with patch-cord (direct eth. cable from 1st to 2nd). The linux is installed, I want to send data from 1st network card to 2nd. And I want to force the packet to pass via cable. I can set up any ip on cards. With ping I get counters on cards constant. Is it possible with tcp/ip sockets? PS. I need to write a program. which will send packets via eth, so stackoverflow-related question. There can be some OS-dependent way, they will help me too

  Read the article

• Is Private Bytes >> Working Set normal?

  - by Jacob

  OK, this may sound weird, but here goes. There are 2 computers, A (Pentium D) and B (Quad Core) with almost the same amount of RAM running Windows XP. If I run the same code on both computers, the allocated private bytes in A never goes down resulting in a crash later on. In B it looks like the private bytes is constantly deallocated and everything looks fine. In both computers, the working set is deallocated and allocated similarly. Could this be an issue with manifests or DLLs (system)? I'm clueless. Also, I compiled the executable on A and ran it on B and it worked. Note: I observed the utilized memory with Process Explorer. Question: During execution (where we have several allocations and deallocations) is it normal for the number of private bytes to be much bigger (1.5 GB vs 70 MB) than the working set?

  Read the article

• Mac OS : creating a background periodic simple script

  - by Julien

  Hi folks ! I have a friend who wants something quite easy : he has a mac, and he would like a very simple script/app that runs in the background. The goal is to replace a file every 5 minutes with one downloaded from the internet. I would also like a menu on the top bar (like the clock on Mac Os, the wifi, the sound, Dropbox,...) What would be the easiest way to do that ? Objective C ? AppleScript ? Do you guys have any inspiration for that ? Thanks a lot Julien

  Read the article

• Concurrency Violation in NHibernate( c#) example

  - by vijaysylvester

  For quite some time , I was reading about the optimistic concurrency in NHibernate. If what i understood was correct then the below sample should hold good. Consider two transactions T1 and T2. When T1 and T2 are done simultaneously , the state(DB entries) gets updated with the values of the most latest update.(T1 or T2). Though it seems to be conceptually sound , how do i simulate this for the purpose of understanding and integration testing.? Can someone help me with a sample c# code.? Thanks , vijay

  Read the article

• How to investigate if opencl is possible for an algorithm

  - by Marnix

  I have a heavy-duty algorithm in C# that takes two large Bitmaps of about 10000x5000 and performs photo and ray collision operations on a 3D model to map photos on the 3D model. I would like to know if it is possible to convert such an algorithm to OpenCL to optimize parallel operations during the algorithm. But before asking you to go into the details of the algorithm, I would like to know how I can investigate if my algorithm is convertible to OpenCL. I am not experienced in OpenCL and I would like to know if it is worth it to get into it and learn how it works. Are there things I have to look for that will definitely not work on the graphics card? (for-loops, recursion) Update: My algorithm goes something like: foreach photo split the photo in 64x64 blocks foreach block cast a ray from the camera to the 3D model foreach triangle in 3D model perform raycheck

  Read the article

• Write an add-on or greasemonkey script to "Ajaxify" webpages in Firefox?

  - by Shizhidi

  Hello. I stumbled upon this add-on which "Ajaxifies" parts of its target website. https://addons.mozilla.org/en-US/firefox/addon/51789 I have a similar need like this. I want only part of the webpage's DOM to update upon receiving click on a link, since the website has a rather unified page layout. I have no experiences in writing FF add-ons but I did some basic Ajax and DOM before. So I am looking for programming tips on how to implement "Ajaxification" in a GreaseMonkey script, preferably. If it's not possible, making an add-on is also a sound choice which I'm willing to learn. Thanks in advance!

  Read the article

• Programmatically convert WAV

  - by kaykun

  Hi, I'm writing a file compressor utility in C++ that I want support for PCM WAV files, however I want to keep it in PCM encoding and just convert it to a lower sample rate and change it from stereo to mono if applicable to yield a lower file size. I understand the WAV file header, however I have no experience or knowledge of the actual sound data works. So my question is, would it be relatively easy to programmatically manipulate the "data" sub-chunk in a WAV file to convert it to another sample rate and change the channel number, or would I be much better off using an existing library for it? If it is, then how would it be done? Thanks in advance.

  Read the article

• How to configure Multi-tenant plugin as single-tenant with Spring security plugin as resolver?

  - by Fabien Barbier

  I can create a secure, multi-tenant web app with Grails by : setup spring security plugin, setup Multi-tenant plugin (via multi-tenant install and multi-tenant-spring-security) update config.groovy : tenant { mode = "multiTenant" resolver.type = "springSecurity" } add : Integer userTenntId in User domain add a domain class for tenant Organization associate the tenants with Organization Edit BootStrap.groovy. Everything works fine in multi-tenant mode, but how to use mode = "singleTenant" ? This configuration sound not working : tenant { mode = "singleTenant" resolver.type = "springSecurity" } Edit : I try this config : tenant { mode = "singleTenant" resolver.type = "springSecurity" datasourceResolver.type = "config" dataSourceTenantMap { t1 = "jdbc:hsqldb:file:custFoo" t2 = "jdbc:hsqldb:file:custBar" } } But I get : ERROR errors.GrailsExceptionResolver - Executing action [list] of controller [org.example.TicketController] caused exception: java.lang.StackOverflowError and : Caused by: java.lang.StackOverflowError at org.grails.multitenant.springsecurity.SpringSecurityCurrentTenant.getTenantIdFromSpringSecurity(SpringSecurityCurrentTenant.groovy:50) at org.grails.multitenant.springsecurity.SpringSecurityCurrentTenant.this$2$getTenantIdFromSpringSecurity(SpringSecurityCurrentTenant.groovy) at org.grails.multitenant.springsecurity.SpringSecurityCurrentTenant$this$2$getTenantIdFromSpringSecurity.callCurrent(Unknown Source) at org.grails.multitenant.springsecurity.SpringSecurityCurrentTenant.get(SpringSecurityCurrentTenant.groovy:41) at com.infusion.tenant.spring.TenantBeanContainer.getBean(TenantBeanContainer.java:53) at com.infusion.tenant.spring.TenantMethodInterceptor.invoke(TenantMethodInterceptor.java:32) at $Proxy14.getConnection(Unknown Source)

  Read the article

• Don't understand the typing of Scala's delimited continuations (A @cps[B,C])

  - by jkff

  I'm struggling to understand what precisely does it mean when a value has type A @cps[B,C] and what types of this form should I assign to my values when using the delimited continuations facility. I've looked at some sources: http://lamp.epfl.ch/~rompf/continuations-icfp09.pdf http://www.scala-lang.org/node/2096 http://dcsobral.blogspot.com/2009/07/delimited-continuations-explained-in.html http://blog.richdougherty.com/2009/02/delimited-continuations-in-scala_24.html but they didn't give me much intuition into this. In the last link, the author tries to give an explicit explanation, but it is not clear enough anyway. The A here represents the output of the computation, which is also the input to its continuation. The B represents the return type of that continuation, and the C represents its "final" return type—because shift can do further processing to the returned value and change its type. I don't understand the difference between "output of the computation", "return type of the continuation" and "final return type of the continuation". They sound like synonyms.

  Read the article

• Web Services vs Persistent Sockets

  - by dsquires

  I plan on doing a little benchmarking around this question, myself. But I thought it would be good to get some initial feedback from "the community". Has anyone out there done any analysis regarding the pros and cons of these two technologies? My thoughts: Opening and closing TCP/IP connections for web service calls is relatively expensive compared to persistent connections. Dealing with intermittent connection errors and state, etc... would be easier with a web service based framework. You don't see World of Warcraft using web services. One question that I can't seem to find much of answer for anywhere (even on here)... are the limits on the # of persistent connections a single network card can support, etc?

  Read the article

• iPad Orientation Paradigm

  - by JustinXXVII

  I'm not a super awesome designer so this new paradigm has me a little cranky. The iPad is not supposed to have a standard orientation, and should/shall display screen contents at whichever orientation the user decides. This has me sort of stumped. I can keep my UI designed the way I want it in landscape mode, but switching to portrait, I just can't determine the best way to present app content. I know it's all speculation at this point, but what are the chances we can override the autoRotateToOrientation to only include the orientation of our choice? Apple ignored the HIG on a lot of issues for iPhone, including splash screens, saving state, etc. I know we can't really argue with Apple, but doesn't it sound slightly ridiculous to reject an app because it won't rotate to portrait? I've come a long way porting some code to iPad and it works great in landscape mode. I guess only time will tell. What do you all think?

  Read the article

• Cannot Debug Visual Basic 6 ActiveX Component On 64-bit OS

  - by Humanier

  Hi, The situation might sound a bit weird but I have to play with what I have. There's a Win2003 64-bit server OS and a legacy application written using Visual Studio 6. The app consists of two parts: ActiveX components written in VB6 and C++ code which uses them. I need to debug the components' code. I installed Visual Studio 6 on the server and I'm able to step into the component's code. Then I got following situation: 1) C++ code works until it needs to instantiate component A. 2) At this step we switch to VB6 and start debugging Component's A. 3) In the very beginning component A creates an instance of a class C exposed by component B. At this step VB6 debugger shows error message with title "OLEDB32.DLL" and following text: "Failed to load resource DLL C:\Program Files (x86)\Common Files\System\Ole DB\OLEDB32R.DLL" Additional information: The last step in initialization of the class C is opening an ADO connection to SQL server using OLEDB provider. I'd appreciate any ideas on how resolve this problem. Thanks in advance.

  Read the article

• Android: Voice Recording and saving audio

  - by user1320912

  I am working on application that will record the voice of the user and save the file on the SD card and then allow the user to listen to the audio again. I am able to allow the user to record his voice using the RecognizerIntent, but I cant figure out how to save the audio file and allow the user to hear the audio. I would appreciate it if someone could help me out. I have displayed my code below: // Setting up the onClickListener for Audio Button attachVoice = (Button) findViewById(R.id.AttachVoice_questionandanswer); attachVoice.setOnClickListener(new OnClickListener() { public void onClick(View v) { Intent voiceIntent = new Intent(RecognizerIntent.ACTION_RECOGNIZE_SPEECH); voiceIntent.putExtra(RecognizerIntent.EXTRA_LANGUAGE_MODEL, RecognizerIntent.LANGUAGE_MODEL_FREE_FORM); voiceIntent.putExtra(RecognizerIntent.EXTRA_PROMPT, "Please Speak"); startActivityForResult(voiceIntent, VOICE_REQUEST); } }); protected void onActivityResult(int requestCode, int resultCode, Intent data) { if(requestCode == VOICE_REQUEST && resultCode == RESULT_OK){ }

  Read the article

• Combine DVCS with Visual Source Safe

  - by WBlasko

  I'm forced to use Visual Source Safe 2005 at work. I'd like to combine that with a DVCS, so that I can check in files locally without disrupting my co-workers if there's a bug or it doesn't compile. In my attempts with Mercurial, it works, but causes a few weird issues. Namely, it thinks someone else has checked out the files I have checked out. Here's my thoughts on how I should manage it: Disable auto-checkout. Work locally in Mercurial When I'm ready to push my changes... Clone my Mercurial repository. Update my Visual Source Safe repository Pull and merge the two repositories using Mercurial. Check everything into Visual Source Safe. Does this sound reasonable? I'm always hearing bad things about VSS, is this just asking for me to see those problems firsthand?

  Read the article

• Android cooliris gallery developer documentation

  - by mefesto

  Does anyone know how to integrate with the new Gallery3D app (cooliris android gallery)? I want to launch that app so it shows the thumbnails for only a specific folder. For example, say my app downloads images from my server and stores them in a folder on the sd-card (/sdcard/myapp/image-cache/someid/*). I'd like to be able to do something like the following: // within an activity Uri uri = Uri.withAppendedPath(Media.EXTERNAL_CONTENT_URI, "myapp/image-cache/someid"); Intent intent = new Intent(Intent.ACTION_VIEW, uri); startActivity(intent); Thanks.

  Read the article

• c# ASP HttpResponse with redirect causes HTTP 302

  - by acnse

  Hi, I have a flow of web pages A and B. On the web page A, I do a "Response.Redirect("B.aspx"); The page B needs a client certificate. When the redirect is done I see a popup asking for a client certificate. I select the correct certificate, which is retrieved from a smart card, and then I insert the pin. Right after, I see a page saying that the connection was lost, and I receive an HTTP 302. I never reach the page B.aspx. I tried to add the following line "Response.RedirectLocation = "B.aspx"; but with no success too. Any hints? Thanks

  Read the article

• Embedding QT application in Eclipse/RCP framework

  - by mots_g

  Hi, I'm trying to embed my working QT application in Eclipse RCP framework(might not sound wise but i need to do this). I'm using QT 4.5 (not yet explored what QTJambi is all about and has to offer) I convert my existing application as a dll and load it through eclipse application. Things dont work as they should as the QTApplication loop sits listening for events, and there is a good mismatch of events. Certain UI objects dont get the events. If I comment my Qppliaction::exec(), then the behaviour in QT app changes. Is there a way to achieve what I'm trying to achieve?? Thanks

  Read the article

• Python/Django: Which authorize.net library should I use?

  - by Parand

  I need authorize.net integration for subscription payments, likely using CIM. The requirements are simple - recurring monthly payments, with a few different price points. Customer credit card info will be stored a authorize.net . There are quite a few libraries and code snippets around, I'm looking for recommendations as to which work best. Satchmo seems more than I need, and it looks like it's complex. Django-Bursar seems like what I need, but it's listed as alpha. The adroll/authorize library also looks pretty good. The CIM XML APIs don't look too bad, I could connect directly with them. And there are quite a few other code snippets. What's the best choice right now, given my fairly simple requirements?

  Read the article

• grouping draggable objects with jquery-ui draggable

  - by Jim Robert

  Hello, I want to use jquery draggable/droppable to let the user select a group of objects (each one has a checkbox in the corner) and then drag all the selected objects as a group... I can't figure out for the life of me how to do it haha. Here is what I'm thinking will lead to a usable solution, on each draggable object, use the start() event and somehow grab all the other selected objects and add them to the selection I was also considering just making the dragged object look like a group of objects (they're images, so a pile of photos maybe) for performance reasons. I think using the draggable functionality might fall over if you drag several dozen objects at once, does that sound like a better idea?

  Read the article

• Developing a GPS car tracking system

  - by Click Ok

  I'm in the brainstorming phase to develop a GPS car tracking system requested by a customer. I myself know the directions to build some GPS system to mobile phones and etc. But sincerely I don't know how to start in that project. That is the scenario: 1) The cars will get a device with a SIM CARD that will emit GPS signals. 2) My customer will in any place (home, work, etc) with a web connection will see in the map where the car is located. For me, I have not problems at get the GPS data, convert to usable info and show the position in some map system (like Google Maps or MS Bing Maps, by example). My problem is, how I do to retrieve that "GPS Signal" from device in the car? I will need some kind of "Receiver Device" connected to a web server machine in order to my application to consume that data? Or "automagically" my sodtware will receive the info from a third-party web-service? Or what?

  Read the article

• Is it possible to have AVFramework and AudioToolbox framework in one app?

  - by Satyam

  I'm trying to write develop audio related application. In that, I'm using AudioToolBox framework for recording the sound. And I'm using AVFramework to play soudns. When app is stared, it will play some mp3 file using AVFramework. And also initializes Audiotoolbox. In simulator, I'm able to record and play. But when I'm testing it on iPhone, I'm getting following error for initializing AudioToolBox. 2009-12-11 22:25:51.599 StoryBook[807:207] AudioRecorder init AudioSessionInitialize failed with error: 1768843636 Can some one tell me whether we can use both AV as well as Audio Toolbox frame works in one application? Why I'm getting that error?

  Read the article

• What does the status code of the Perl interpreter mean?

  - by futureelite7

  Hi, This might sound slightly confusing, but please bear with me. I'm trying to execute a copy of the Perl interpreter using Java's Runtime.exec(). However, it returned error code 9. After running the file a few times, the perl interpreter mysteriously started to return code 253 with no changes in my command at all. What does code 253 / code 9 mean? A google search for perl interpreter's exit codes turned up nothing. Where can I find a list of exit codes for the Perl interpreter? Thanks!

  Read the article

• ASP.NET CompositeControl with child controls that contain children

  - by tomfanning

  I am building an ASP.NET server control which extends CompositeControl. I need fine grained control over the rendering, so I override Render() and output the child controls myself, interspersed with HTML generation code: writer.AddStyleAttribute("float", "left"); writer.RenderBeginTag(System.Web.UI.HtmlTextWriterTag.Div); writer.RenderBeginTag(System.Web.UI.HtmlTextWriterTag.Strong); writer.Write("Table"); writer.RenderEndTag(); // strong writer.WriteBreak(); tableList.RenderControl(writer); writer.RenderEndTag(); // div This works really well for user controls that just contain simple controls without children of their own. However, if I want to use something like a MultiView or an UpdatePanel I run into problems, since I can't override Render() on View or UpdatePanel without extending them, and if I do extend them the implementation would presumably have to depend on FindControl() voodoo to get references to the right controls during render. That doesn't sound like the right way to do this - is there a better way?

  Read the article

• Changing a Container while using Visitor

  - by Florian

  Hi everyone, I implemented the Visitor pattern in C++ using a STL-like iterator for storing the Visitor's current position in the container. Now I would like to change the container while I iterate over it, and I'm especially interested in deleting items from the container, even the one I'm currently visiting. Now obviously this will invalidate the Visitors internal iterator, because it was pointing to exactly this item. Currently, I store a list of all iterators in the container and update them, as soon as anything is added to or removed from the list. So in a way this is similar to the Observer pattern applied to the iterator (as Observer) and the list (as Observable). Alternatively I considered having the visitor() methods return some hint to the Visitor about what happend to the current item and how to proceed iterating, but that doesn't sound like such a good idea either, because the visit() implementation shouldn't really care about finding the next item. So, my question is: What's the best way to keep a visitor working, even when items are added to the container or removed from it. Regards, Florian

  Read the article

• StringTokenizer problem of tokenizing

  - by Mr CooL

  String a ="the STRING TOKENIZER CLASS ALLOWS an APPLICATION to BREAK a STRING into TOKENS.  "; StringTokenizer st = new StringTokenizer(a); while (st.hasMoreTokens()){ System.out.println(st.nextToken()); Given above codes, the output is following, the STRING TOKENIZER CLASS ALLOWS an APPLICATION to BREAK a STRING into TOKENS.  My only question is why the "STRING TOKENIZER CLASS" has been combined into one token???????? When I try to run this code, System.out.println("STRING TOKENIZER CLASS".contains(" ")); It printed funny result, FALSE It sound not logical right? I've no idea what went wrong. I found out the reason, the space was not recognized as valid space by Java somehow. But, I don't know how it turned up to be like that from the front processing up to the code that I've posted.

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >