Search Results

Search found 29990 results on 1200 pages for 'object recognition'.

Page 283/1200 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

  - by Tarun Arora

  Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

  Read the article

• Calculating the Size (in Bytes and MB) of a Oracle Coherence Cache

  - by Ricardo Ferreira

  The concept and usage of data grids are becoming very popular in this days since this type of technology are evolving very fast with some cool lead products like Oracle Coherence. Once for a while, developers need an programmatic way to calculate the total size of a specific cache that are residing in the data grid. In this post, I will show how to accomplish this using Oracle Coherence API. This example has been tested with 3.6, 3.7 and 3.7.1 versions of Oracle Coherence. To start the development of this example, you need to create a POJO ("Plain Old Java Object") that represents a data structure that will hold user data. This data structure will also create an internal fat so I call that should increase considerably the size of each instance in the heap memory. Create a Java class named "Person" as shown in the listing below. package com.oracle.coherence.domain; import java.io.Serializable; import java.util.ArrayList; import java.util.HashMap; import java.util.List; import java.util.Random; @SuppressWarnings("serial") public class Person implements Serializable { private String firstName; private String lastName; private List<Object> fat; private String email; public Person() { generateFat(); } public Person(String firstName, String lastName, String email) { setFirstName(firstName); setLastName(lastName); setEmail(email); generateFat(); } private void generateFat() { fat = new ArrayList<Object>(); Random random = new Random(); for (int i = 0; i < random.nextInt(18000); i++) { HashMap<Long, Double> internalFat = new HashMap<Long, Double>(); for (int j = 0; j < random.nextInt(10000); j++) { internalFat.put(random.nextLong(), random.nextDouble()); } fat.add(internalFat); } } public String getFirstName() { return firstName; } public void setFirstName(String firstName) { this.firstName = firstName; } public String getLastName() { return lastName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getEmail() { return email; } public void setEmail(String email) { this.email = email; } } Now let's create a Java program that will start a data grid into Coherence and will create a cache named "People", that will hold people instances with sequential integer keys. Each person created in this program will trigger the execution of a custom constructor created in the People class that instantiates an internal fat (the random amount of data generated to increase the size of the object) for each person. Create a Java class named "CreatePeopleCacheAndPopulateWithData" as shown in the listing below. package com.oracle.coherence.demo; import com.oracle.coherence.domain.Person; import com.tangosol.net.CacheFactory; import com.tangosol.net.NamedCache; public class CreatePeopleCacheAndPopulateWithData { public static void main(String[] args) { // Asks Coherence for a new cache named "People"... NamedCache people = CacheFactory.getCache("People"); // Creates three people that will be putted into the data grid. Each person // generates an internal fat that should increase its size in terms of bytes... Person pessoa1 = new Person("Ricardo", "Ferreira", "[email protected]"); Person pessoa2 = new Person("Vitor", "Ferreira", "[email protected]"); Person pessoa3 = new Person("Vivian", "Ferreira", "[email protected]"); // Insert three people at the data grid... people.put(1, pessoa1); people.put(2, pessoa2); people.put(3, pessoa3); // Waits for 5 minutes until the user runs the Java program // that calculates the total size of the people cache... try { System.out.println("---> Waiting for 5 minutes for the cache size calculation..."); Thread.sleep(300000); } catch (InterruptedException ie) { ie.printStackTrace(); } } } Finally, let's create a Java program that, using the Coherence API and JMX, will calculate the total size of each cache that the data grid is currently managing. The approach used in this example was retrieve every cache that the data grid are currently managing, but if you are interested on an specific cache, the same approach can be used, you should only filter witch cache will be looked for. Create a Java class named "CalculateTheSizeOfPeopleCache" as shown in the listing below. package com.oracle.coherence.demo; import java.text.DecimalFormat; import java.util.Map; import java.util.Set; import java.util.TreeMap; import javax.management.MBeanServer; import javax.management.MBeanServerFactory; import javax.management.ObjectName; import com.tangosol.net.CacheFactory; public class CalculateTheSizeOfPeopleCache { @SuppressWarnings({ "unchecked", "rawtypes" }) private void run() throws Exception { // Enable JMX support in this Coherence data grid session... System.setProperty("tangosol.coherence.management", "all"); // Create a sample cache just to access the data grid... CacheFactory.getCache(MBeanServerFactory.class.getName()); // Gets the JMX server from Coherence data grid... MBeanServer jmxServer = getJMXServer(); // Creates a internal data structure that would maintain // the statistics from each cache in the data grid... Map cacheList = new TreeMap(); Set jmxObjectList = jmxServer.queryNames(new ObjectName("Coherence:type=Cache,*"), null); for (Object jmxObject : jmxObjectList) { ObjectName jmxObjectName = (ObjectName) jmxObject; String cacheName = jmxObjectName.getKeyProperty("name"); if (cacheName.equals(MBeanServerFactory.class.getName())) { continue; } else { cacheList.put(cacheName, new Statistics(cacheName)); } } // Updates the internal data structure with statistic data // retrieved from caches inside the in-memory data grid... Set<String> cacheNames = cacheList.keySet(); for (String cacheName : cacheNames) { Set resultSet = jmxServer.queryNames( new ObjectName("Coherence:type=Cache,name=" + cacheName + ",*"), null); for (Object resultSetRef : resultSet) { ObjectName objectName = (ObjectName) resultSetRef; if (objectName.getKeyProperty("tier").equals("back")) { int unit = (Integer) jmxServer.getAttribute(objectName, "Units"); int size = (Integer) jmxServer.getAttribute(objectName, "Size"); Statistics statistics = (Statistics) cacheList.get(cacheName); statistics.incrementUnit(unit); statistics.incrementSize(size); cacheList.put(cacheName, statistics); } } } // Finally... print the objects from the internal data // structure that represents the statistics from caches... cacheNames = cacheList.keySet(); for (String cacheName : cacheNames) { Statistics estatisticas = (Statistics) cacheList.get(cacheName); System.out.println(estatisticas); } } public MBeanServer getJMXServer() { MBeanServer jmxServer = null; for (Object jmxServerRef : MBeanServerFactory.findMBeanServer(null)) { jmxServer = (MBeanServer) jmxServerRef; if (jmxServer.getDefaultDomain().equals(DEFAULT_DOMAIN) || DEFAULT_DOMAIN.length() == 0) { break; } jmxServer = null; } if (jmxServer == null) { jmxServer = MBeanServerFactory.createMBeanServer(DEFAULT_DOMAIN); } return jmxServer; } private class Statistics { private long unit; private long size; private String cacheName; public Statistics(String cacheName) { this.cacheName = cacheName; } public void incrementUnit(long unit) { this.unit += unit; } public void incrementSize(long size) { this.size += size; } public long getUnit() { return unit; } public long getSize() { return size; } public double getUnitInMB() { return unit / (1024.0 * 1024.0); } public double getAverageSize() { return size == 0 ? 0 : unit / size; } public String toString() { StringBuffer sb = new StringBuffer(); sb.append("\nCache Statistics of '").append(cacheName).append("':\n"); sb.append(" - Total Entries of Cache -----> " + getSize()).append("\n"); sb.append(" - Used Memory (Bytes) --------> " + getUnit()).append("\n"); sb.append(" - Used Memory (MB) -----------> " + FORMAT.format(getUnitInMB())).append("\n"); sb.append(" - Object Average Size --------> " + FORMAT.format(getAverageSize())).append("\n"); return sb.toString(); } } public static void main(String[] args) throws Exception { new CalculateTheSizeOfPeopleCache().run(); } public static final DecimalFormat FORMAT = new DecimalFormat("###.###"); public static final String DEFAULT_DOMAIN = ""; public static final String DOMAIN_NAME = "Coherence"; } I've commented the overall example so, I don't think that you should get into trouble to understand it. Basically we are dealing with JMX. The first thing to do is enable JMX support for the Coherence client (ie, an JVM that will only retrieve values from the data grid and will not integrate the cluster) application. This can be done very easily using the runtime "tangosol.coherence.management" system property. Consult the Coherence documentation for JMX to understand the possible values that could be applied. The program creates an in memory data structure that holds a custom class created called "Statistics". This class represents the information that we are interested to see, which in this case are the size in bytes and in MB of the caches. An instance of this class is created for each cache that are currently managed by the data grid. Using JMX specific methods, we retrieve the information that are relevant for calculate the total size of the caches. To test this example, you should execute first the CreatePeopleCacheAndPopulateWithData.java program and after the CreatePeopleCacheAndPopulateWithData.java program. The results in the console should be something like this: 2012-06-23 13:29:31.188/4.970 Oracle Coherence 3.6.0.4 <Info> (thread=Main Thread, member=n/a): Loaded operational configuration from "jar:file:/E:/Oracle/Middleware/oepe_11gR1PS4/workspace/calcular-tamanho-cache-coherence/lib/coherence.jar!/tangosol-coherence.xml" 2012-06-23 13:29:31.219/5.001 Oracle Coherence 3.6.0.4 <Info> (thread=Main Thread, member=n/a): Loaded operational overrides from "jar:file:/E:/Oracle/Middleware/oepe_11gR1PS4/workspace/calcular-tamanho-cache-coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml" 2012-06-23 13:29:31.219/5.001 Oracle Coherence 3.6.0.4 <D5> (thread=Main Thread, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified 2012-06-23 13:29:31.266/5.048 Oracle Coherence 3.6.0.4 <D5> (thread=Main Thread, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified Oracle Coherence Version 3.6.0.4 Build 19111 Grid Edition: Development mode Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved. 2012-06-23 13:29:33.156/6.938 Oracle Coherence GE 3.6.0.4 <Info> (thread=Main Thread, member=n/a): Loaded Reporter configuration from "jar:file:/E:/Oracle/Middleware/oepe_11gR1PS4/workspace/calcular-tamanho-cache-coherence/lib/coherence.jar!/reports/report-group.xml" 2012-06-23 13:29:33.500/7.282 Oracle Coherence GE 3.6.0.4 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from "jar:file:/E:/Oracle/Middleware/oepe_11gR1PS4/workspace/calcular-tamanho-cache-coherence/lib/coherence.jar!/coherence-cache-config.xml" 2012-06-23 13:29:35.391/9.173 Oracle Coherence GE 3.6.0.4 <D4> (thread=Main Thread, member=n/a): TCMP bound to /192.168.177.133:8090 using SystemSocketProvider 2012-06-23 13:29:37.062/10.844 Oracle Coherence GE 3.6.0.4 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Timestamp=2012-06-23 13:29:36.899, Address=192.168.177.133:8090, MachineId=55685, Location=process:244, Role=Oracle, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) joined cluster "cluster:0xC4DB" with senior Member(Id=1, Timestamp=2012-06-23 13:29:14.031, Address=192.168.177.133:8088, MachineId=55685, Location=process:1128, Role=CreatePeopleCacheAndPopulateWith, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) 2012-06-23 13:29:37.172/10.954 Oracle Coherence GE 3.6.0.4 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Cluster with senior member 1 2012-06-23 13:29:37.188/10.970 Oracle Coherence GE 3.6.0.4 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1 2012-06-23 13:29:37.188/10.970 Oracle Coherence GE 3.6.0.4 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1 2012-06-23 13:29:37.188/10.970 Oracle Coherence GE 3.6.0.4 <Info> (thread=Main Thread, member=n/a): Started cluster Name=cluster:0xC4DB Group{Address=224.3.6.0, Port=36000, TTL=4} MasterMemberSet ( ThisMember=Member(Id=2, Timestamp=2012-06-23 13:29:36.899, Address=192.168.177.133:8090, MachineId=55685, Location=process:244, Role=Oracle) OldestMember=Member(Id=1, Timestamp=2012-06-23 13:29:14.031, Address=192.168.177.133:8088, MachineId=55685, Location=process:1128, Role=CreatePeopleCacheAndPopulateWith) ActualMemberSet=MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2012-06-23 13:29:14.031, Address=192.168.177.133:8088, MachineId=55685, Location=process:1128, Role=CreatePeopleCacheAndPopulateWith) Member(Id=2, Timestamp=2012-06-23 13:29:36.899, Address=192.168.177.133:8090, MachineId=55685, Location=process:244, Role=Oracle) ) RecycleMillis=1200000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) TcpRing{Connections=[1]} IpMonitor{AddressListSize=0} 2012-06-23 13:29:37.891/11.673 Oracle Coherence GE 3.6.0.4 <D5> (thread=Invocation:Management, member=2): Service Management joined the cluster with senior service member 1 2012-06-23 13:29:39.203/12.985 Oracle Coherence GE 3.6.0.4 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1 2012-06-23 13:29:39.297/13.079 Oracle Coherence GE 3.6.0.4 <D4> (thread=DistributedCache, member=2): Asking member 1 for 128 primary partitions Cache Statistics of 'People': - Total Entries of Cache -----> 3 - Used Memory (Bytes) --------> 883920 - Used Memory (MB) -----------> 0.843 - Object Average Size --------> 294640 I hope that this post could save you some time when calculate the total size of Coherence cache became a requirement for your high scalable system using data grids. See you!

  Read the article

• AddHandler not working?

  - by EdenMachine

  I can't figure out why my addhandler is not firing? In the Sub "CreateTagStyle" thd AddHandler is to firing when the LinkButton is clicked Is there some reason that addhandlers can't be adding at certain points of the page lifecycle? <%@ Page Title="" Language="VB" MasterPageFile="~/_Common/Admin.master" %> <script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) End Sub Protected Sub RadGrid1_NeedDataSource(ByVal source As Object, ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) If Not e.IsFromDetailTable Then Dim forms As New MB.RequestFormPacket() RadGrid1.DataSource = forms.GetPackets() End If End Sub Protected Sub RadGrid1_DetailTableDataBind(ByVal source As Object, ByVal e As Telerik.Web.UI.GridDetailTableDataBindEventArgs) Select Case e.DetailTableView.Name Case "gtvForms" Dim PacketID As Guid = e.DetailTableView.ParentItem.GetDataKeyValue("ID") e.DetailTableView.DataSource = MB.RequestForm.GetRequestForms(PacketID) End Select End Sub Protected Sub RadGrid1_InsertCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Name Case "gtvPackets" Dim rtbName As RadTextBox = TryCast(e.Item.FindControl("rtbName"), RadTextBox) Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim packet As New MB.RequestFormPacket() packet.Name = rtbName.Text packet.IsActive = IsActive packet.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False RadGrid1.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been added successfully.');", True) Case "gtvForms" Dim parentItem As GridDataItem = e.Item.OwnerTableView.ParentItem Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.RequestFormPacketID = CType(parentItem.OwnerTableView.DataKeyValues(parentItem.ItemIndex)("ID"), Guid) rf.FormID = rcbForms.SelectedValue If MB.RequestFormPacket.HasItems(rf.RequestFormPacketID) Then rf.SortOrder = rf.MaxSortOrder + 1 Else rf.SortOrder = 0 End If rf.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer, GridTableView).Name Case "gtvPackets" Dim PacketID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim Name As String = TryCast(e.Item.FindControl("rtbName"), RadTextBox).Text Dim Tags As String = TryCast(e.Item.FindControl("hdnTags"), HiddenField).Value Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim rfp As New MB.RequestFormPacket() rfp.Update(PacketID, Name, IsActive) Call MB.RequestFormPacketTag.Insert(PacketID, Tags) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been updated successfully.');", True) Case "gtvForms" Dim RequestFormID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.Update(RequestFormID, rcbForms.SelectedValue) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_DeleteCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Dim editedItem As GridEditableItem = TryCast(e.Item, GridEditableItem) Select Case CType(editedItem.Parent.Parent, GridTableView).Name Case "gtvPackets" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestFormPacket.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form Packet has been deleted.');", True) Case "gtvForms" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestForm.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form has been removed.');", True) End Select End Sub Protected Sub ibnItemUpArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveUp(ID) gtv.Rebind() End Sub Protected Sub ibnItemDownArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveDown(ID) gtv.Rebind() End Sub Protected Sub RadGrid1_RowDrop(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridDragDropEventArgs) If String.IsNullOrEmpty(e.HtmlElement) Then If e.DraggedItems(0).OwnerGridID = RadGrid1.ClientID Then If e.DestDataItem IsNot Nothing Then Dim gtv As GridTableView = CType(e.DestDataItem.NamingContainer, GridTableView) For Each gdi As GridDataItem In e.DraggedItems Select Case gtv.Name Case "gtvForms" MB.RequestForm.DragAndDropReorder(gdi.GetDataKeyValue("ID"), e.DestDataItem.GetDataKeyValue("ID"), IIf(e.DropPosition = GridItemDropPosition.Above, True, False)) gtv.Rebind() End Select Next End If End If End If End Sub Protected Sub cbxAllowDragAndDrop_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim cbx As CheckBox = CType(sender, CheckBox) If cbx.Checked Then RadGrid1.ClientSettings.AllowRowsDragDrop = True RadGrid1.ClientSettings.Selecting.AllowRowSelect = True RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = True Else RadGrid1.ClientSettings.AllowRowsDragDrop = False RadGrid1.ClientSettings.Selecting.AllowRowSelect = False RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = False End If End Sub Protected Sub ibnDisableToggleProcess_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Dim ibn As ImageButton = CType(sender, ImageButton) Dim hdn As HiddenField = CType(ibn.NamingContainer.FindControl("hdnDisableProcessID"), HiddenField) Dim status As Boolean = MB.RequestFormPacket.ActivateToggle(New Guid(hdn.Value)) Dim gtv As GridTableView = CType(ibn.NamingContainer.NamingContainer, GridTableView) gtv.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Process has been " & IIf(status, "Activated", "Deactivated") & ".');", True) End Sub Protected Function DisplayTagList(ByVal tags As IEnumerable(Of MB.RequestFormPacketTag)) As String Dim list As String = "" For Each t As MB.RequestFormPacketTag In tags list += "<span class=""tags"">" & t.Tag.Name & "</span>" Next Return list End Function Protected Sub RadGrid1_ItemDataBound(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridItemEventArgs) Select Case e.Item.GetType.Name Case "GridEditFormInsertItem" 'do nothing Case "GridEditFormItem" Dim plh As PlaceHolder = CType(e.Item.FindControl("plhTags"), PlaceHolder) Dim hdn As HiddenField = CType(e.Item.FindControl("hdnTags"), HiddenField) If hdn IsNot Nothing Then Dim gefi As GridEditFormItem = e.Item Dim packet As MB.RequestFormPacket = gefi.DataItem For Each pt As MB.RequestFormPacketTag In packet.RequestFormPacketTags Call CreateTagStyle(plh, hdn, pt.Tag.Name) If hdn.Value = "" Then hdn.Value = "|" End If hdn.Value += pt.Tag.Name & "|" Next End If End Select End Sub Protected Sub btnAddTag_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim btnAddTag As Button = sender Dim rtbTags As RadTextBox = btnAddTag.NamingContainer.FindControl("rtbTags") Dim plhTags As PlaceHolder = btnAddTag.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = btnAddTag.NamingContainer.FindControl("hdnTags") Dim TagExists As Boolean = False rtbTags.Text = rtbTags.Text.ToUpper().Trim() Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next If TagExists = False And String.IsNullOrEmpty(rtbTags.Text) = False Then Call CreateTagStyle(plhTags, hdnTags, rtbTags.Text) If String.IsNullOrEmpty(hdnTags.Value) Then hdnTags.Value = "|" End If hdnTags.Value += rtbTags.Text & "|" 'System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "highlightTag('" & lbn.ClientID & "');", True) End If rtbTags.Text = "" rtbTags.Focus() End Sub Public Sub RemoveTag(ByVal sender As Object, ByVal e As EventArgs) Response.End() Dim lbnSender As LinkButton = sender Dim plhTags As PlaceHolder = lbnSender.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = lbnSender.NamingContainer.FindControl("hdnTags") Response.Write(hdnTags.Value) Response.End() Dim TagExists As Boolean = False Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next End Sub Protected Sub CreateTagStyle(ByVal plh As PlaceHolder, ByVal hdn As HiddenField, ByVal tagName As String) Dim lbn As New LinkButton() lbn.ID = "lbn_" & hdn.ClientID & "_" & tagName lbn.CssClass = "deleteCreateTag" lbn.Text = "X" AddHandler lbn.Click, AddressOf RemoveTag plh.Controls.Add(New LiteralControl("<div><span class=showTag>" & tagName & "</span>")) plh.Controls.Add(lbn) plh.Controls.Add(New LiteralControl("</div>")) End Sub </script> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"> <style type="text/css"> .tags { border:solid 1px #93AFE5; background-color:#F3F7F8; margin: 0px 2px 0px 2px; padding: 0px 4px 0px 4px; font-family:Verdana; font-size:10px; text-transform:uppercase; } </style> <script type="text/javascript"> function highlightTag(id) { $("#" + id).highlightFade({ color: '#FFFF99', speed: 2000, iterator: 'sinusoidal' }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <telerik:RadAjaxManager ID="RadAjaxManager1" runat="server" DefaultLoadingPanelID="RadAjaxLoadingPanel1" EnableAJAX="false"> <AjaxSettings> <telerik:AjaxSetting AjaxControlID="RadGrid1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="RadGrid1" /> </UpdatedControls> </telerik:AjaxSetting> </AjaxSettings> </telerik:RadAjaxManager> <telerik:RadAjaxLoadingPanel ID="RadAjaxLoadingPanel1" runat="server" /> <telerik:RadTabStrip ID="RadTabStrip1" runat="server" Skin="WebBlue" style="position:relative;top:1px;" ValidationGroup="vgTabs"> <Tabs> <telerik:RadTab Text="Request Form Packets" Selected="true" ImageUrl="~/Admin/Images/Packet2.png" /> <telerik:RadTab Text="Request Forms" NavigateUrl="Forms.aspx" ImageUrl="~/Admin/Images/Forms.png" /> </Tabs> </telerik:RadTabStrip> <asp:ObjectDataSource ID="odsForms" runat="server" TypeName="MB.Form" SelectMethod="GetForms" /> <asp:Panel ID="pnlContent" runat="server" CssClass="ContentPanel"> <telerik:RadGrid ID="RadGrid1" runat="server" AllowPaging="True" AllowSorting="True" GridLines="None" OnNeedDataSource="RadGrid1_NeedDataSource" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true" OnInsertCommand="RadGrid1_InsertCommand" OnUpdateCommand="RadGrid1_UpdateCommand" OnDeleteCommand="RadGrid1_DeleteCommand" OnRowDrop="RadGrid1_RowDrop" OnDetailTableDataBind="RadGrid1_DetailTableDataBind" OnItemDataBound="RadGrid1_ItemDataBound"> <%-----------------------------------------------------------%> <%------------------------- PACKETS -------------------------%> <%-----------------------------------------------------------%> <MasterTableView AutoGenerateColumns="False" DataKeyNames="ID" ClientDataKeyNames="ID" ShowHeadersWhenNoRecords="true" Name="gtvPackets" NoMasterRecordsText="There are currently no Request Form Packets" GroupLoadMode="Client" RetrieveNullAsDBNull="true" CommandItemDisplay="Top" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true"> <RowIndicatorColumn> <HeaderStyle Width="20px"></HeaderStyle> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px"></HeaderStyle> </ExpandCollapseColumn> <CommandItemTemplate> <table width="100%"> <tr> <td class="AdminGridHeader">&nbsp;<img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Request Form Packets</td> <td width="1%"><asp:CheckBox ID="cbxAllowDragAndDrop" runat="server" AutoPostBack="true" OnCheckedChanged="cbxAllowDragAndDrop_CheckedChanged" /></td> <td width="1%" nowrap="nowrap"><asp:Label AssociatedControlID="cbxAllowDragAndDrop" ID="Label1" runat="server" Text="Enable Drag and Drop Reordering" ToolTip="Drag and Drop Reordering applies only to Forms." /></td> <td align="right" width="1%"><asp:Button ID="btnAddPacket" Text="Create New Packet" runat="server" CommandName="InitInsert" /></td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" HeaderStyle-Font-Bold="true" UniqueName="EditCommandColumn" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Packet Name" UniqueName="PacketName" SortExpression="Name"> <ItemTemplate> <img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;<%#Eval("Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadTextBox runat="server" ID="rtbName" Width="300" Text='<%# Bind("Name") %>' /> <asp:RequiredFieldValidator ID="rfvName" runat="server" ErrorMessage="Required" ControlToValidate="rtbName" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Tags" UniqueName="Tags"> <ItemTemplate> <%#DisplayTagList(Eval("RequestFormPacketTags"))%> </ItemTemplate> <EditItemTemplate> <asp:Panel ID="pnlAddTags" runat="server" DefaultButton="btnAddTag"> <table cellpadding="0" cellspacing="0"> <tr> <td> <telerik:RadTextBox ID="rtbTags" runat="server" Width="200" style="text-transform:uppercase;" /> <asp:RegularExpressionValidator ID="revTags" runat="server" ErrorMessage="Invalid Entry" ControlToValidate="rtbTags" Display="Dynamic" ValidationExpression="^[^<>`~!/@\#}$%:;)(_^{&*=|+]+$" ValidationGroup="vgTags" /> </td> <td> <asp:Button ID="btnAddTag" runat="server" ValidationGroup="vgTags" Text="Add" OnClick="btnAddTag_Click" /> </td> </tr> </table> </asp:Panel> <div id="divTags"> <asp:PlaceHolder id="plhTags" runat="server" /> <asp:HiddenField ID="hdnTags" runat="server" /> </div> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderTooltip="Disable" ItemStyle-Width="1%" ItemStyle-HorizontalAlign="Center" SortExpression="IsActive" UniqueName="IsActive" ReadOnly="true"> <ItemTemplate> <asp:ImageButton ID="ibnDisabledProcess" runat="server" ImageUrl="../Images/Icons/Stop.png" Width="16" OnClientClick="return window.confirm('Activate this Process?');" ToolTip="Click to activate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),false,true) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:ImageButton ID="ibnEnabledProcess" runat="server" ImageUrl="../Images/Icons/Stop_disabled.png" Width="16" OnClientClick="return window.confirm('Deactivate this Process?');" ToolTip="Click to deactivate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),true,false) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:HiddenField ID="hdnDisableProcessID" runat="server" Value='<%#Eval("ID") %>' /> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Is Active" UniqueName="IsActiveCheckbox" Display="false"> <EditItemTemplate> <asp:CheckBox ID="cbxIsActive" runat="server" Checked='<%# IIF(Eval("IsActive") Is DbNull.Value OrElse Eval("IsActive") = False,False,True) %>' /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridEditCommandColumn ButtonType="ImageButton" EditText="Edit Admin" ItemStyle-Width="16" EditImageUrl="~/Images/edit-small.png" /> <telerik:GridButtonColumn ConfirmText="Do you really want to delete this Admin? WARNING: THIS CANNOT BE UNDONE!!" ConfirmDialogType="RadWindow" ConfirmTitle="Delete" ButtonType="ImageButton" CommandName="Delete" Text="Delete Admin" ImageUrl="~/Images/Delete.png" UniqueName="DeleteColumn"> <ItemStyle HorizontalAlign="Center" Width="16" /> </telerik:GridButtonColumn> </Columns> <DetailTables> <%-----------------------------------------------------------%> <%-------------------------- FORMS --------------------------%> <%-----------------------------------------------------------%> <telerik:GridTableView Name="gtvForms" AllowPaging="true" PagerStyle-Position="TopAndBottom" PageSize="20" AutoGenerateColumns="false" DataKeyNames="RequestFormPacketID,ID" runat="server" CommandItemDisplay="Top" Width="100%"> <ParentTableRelation> <telerik:GridRelationFields DetailKeyField="RequestFormPacketID" MasterKeyField="ID" /> </ParentTableRelation> <CommandItemTemplate> <table width="100%" class="AdminGridHeaders"> <tr> <td class="AdminGridHeaders"> &nbsp;<img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Forms </td> <td align="right"> <asp:Button ID="ibnAdd" runat="server" Text="Add Form" CommandName="InitInsert" /> </td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" InsertText="Save" UpdateText="Update" CancelText="Cancel" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Form Name" UniqueName="FormName"> <ItemTemplate> <img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" style="margin-right:4px;" /> <%#Eval("Form.Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadComboBox ID="rcbForms" runat="server" DataSourceID="odsForms" AppendDataBoundItems="true" DataTextField="Name" DataValueField="ID" SelectedValue='<%#Bind("FormID")%>'> <Items> <telerik:RadComboBoxItem Text="-- Select a Form --" Value="" /> </Items> </telerik:RadComboBox> <asp:RequiredFieldValidator ID="rfvForms" runat="server" ErrorMessage="Required" ControlToValidate="rcbForms" InitialValue="-- Select a Form --" Display="Dynamic" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Test" ReadOnly="true" UniqueName="TestForm" HeaderStyle-Width="1%" ItemStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="hypTestForm" runat="server" NavigateUrl='<%# "FormsPreview.aspx?fid=" & Eval("FormID").ToString() & "&test=true" %>' Target="_blank"><asp:Image ID="imgTestProcess" runat="server" ImageUrl="~/Admin/Images/Test.png" ImageAlign="AbsMiddle" ToolTip="Test Form" /></asp:HyperLink> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Header" SortExpression="Header" UniqueName="Header"> <ItemTemplate> <%#Eval("Form.Header")%>&nbsp; </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn ReadOnly="true" ItemStyle-HorizontalAlign="Center" HeaderStyle-Width="1%" HeaderStyle-Wrap="false" ItemStyle-Wrap="false" UniqueName="SortOrder"> <ItemTemplate> <asp:ImageButton ID="ibnItemUpArrow" runat="server" Width="16" height="16" ImageUrl="~/Admin/Images/ArrowUp.png" ImageAlign="AbsMiddle" Visible='<%#IIF(Eval("SortOrder") = 0,false,true) %>' CommandArgument='<%#Eval("ID") %>' OnCommand=

  Read the article

• NHibernate.MappingException: No persister for:

  - by Sara Chipps

  Now, before you say it I DID google and my hbm.xml file IS an Embedded Resource. Here is the code I am calling: ISession session = GetCurrentSession(); var returnObject = session.Get<T>(Id); Here is my mapping file for the class: <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <class name="HQData.Objects.SubCategory, HQData" table="SubCategory" lazy="true"> <id name="ID" column="ID" unsaved-value="0"> <generator class="identity" /> </id> <property name="Name" column="Name" /> <property name="NumberOfBuckets" column="NumberOfBuckets" /> <property name="SearchCriteriaOne" column="SearchCriteriaOne" /> <bag name="_Businesses" cascade="all"> <key column="SubCategoryId"/> <one-to-many class="HQData.Objects.Business, HQData"/> </bag> <bag name="_Buckets" cascade="all"> <key column="SubCategoryId"/> <one-to-many class="HQData.Objects.Bucket, HQData"/> </bag> </class> </hibernate-mapping> Has anyone run to this issue before? I swore that was it after I read it, but no dice. Here is the rest of the error and thanks for your help. MappingException: No persister for: HQData.Objects.SubCategory]NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName, Boolean throwIfNotFound) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionFactoryImpl.cs:766 NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionFactoryImpl.cs:752 NHibernate.Event.Default.DefaultLoadEventListener.OnLoad(LoadEvent event, LoadType loadType) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Event\Default\DefaultLoadEventListener.cs:37 NHibernate.Impl.SessionImpl.FireLoad(LoadEvent event, LoadType loadType) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:2054 NHibernate.Impl.SessionImpl.Get(String entityName, Object id) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:1029 NHibernate.Impl.SessionImpl.Get(Type entityClass, Object id) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:1020 NHibernate.Impl.SessionImpl.Get(Object id) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:985 HQData.DataAccessUtils.NHibernateObjectHelper.LoadDataObject(Int32 Id) in C:\Development\HQChannelRepo\HQ Channel Application\HQChannel\HQData\DataAccessUtils\NHibernateObjectHelper.cs:42 HQWebsite.LocalSearch.get_subCategory() in C:\Development\HQChannelRepo\HQ Channel Application\HQChannel\HQWebsite\LocalSearch.aspx.cs:17 HQWebsite.LocalSearch.Page_Load(Object sender, EventArgs e) in C:\Development\HQChannelRepo\HQ Channel Application\HQChannel\HQWebsite\LocalSearch.aspx.cs:27 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436 I had changed some code and I wasn't adding the Assembly to the config file during runtime. Thanks for your help This has been fixed, I am not F-ing with my NHibernate setup ever again!

  Read the article

• .Net Intermittent System.Web.Services.Protocols.SoapHeaderException

  - by ScottE

  We have a .net 3.5 web app that consumes third party web services. The proxy was created by adding a web reference to their wsdl. This proxy is not compiled. Our error logging is picking up frequent but intermittent exceptions: An exception of type 'System.Web.Services.Protocols.SoapHeaderException' occurred and was caught If I follow the url to the page that generated the exception, I can't recreate it. Edit: Here is most of the exception - where it bubbled up from Message : Internal Error Type : System.Web.Services.Protocols.SoapHeaderException, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a Source : System.Web.Services Help link : Actor : Code : http://schemas.xmlsoap.org/soap/envelope/:Client Detail : Lang : Node : Role : SubCode : Data : System.Collections.ListDictionaryInternal TargetSite : System.Object[] ReadResponse(System.Web.Services.Protocols.SoapClientMessage, System.Net.WebResponse, System.IO.Stream, Boolean) Stack Trace : at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Vendor.getSearch(getSearchRequest getSearchRequest) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\be43c34e\b09edc7e\App_WebReferences.pww-cf-q.0.cs:line 73 Edit 2: Inner exceptions: I sometimes get the following inner exceptions logged: Message : Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. Type : System.IO.IOException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Source : System Help link : Data : System.Collections.ListDictionaryInternal TargetSite : Int32 Read(Byte[], Int32, Int32) Stack Trace : at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) And/Or: Message : An existing connection was forcibly closed by the remote host Type : System.Net.Sockets.SocketException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 Source : System Help link : ErrorCode : 10054 SocketErrorCode : ConnectionReset NativeErrorCode : 10054 Data : System.Collections.ListDictionaryInternal TargetSite : Int32 Receive(Byte[], Int32, Int32, System.Net.Sockets.SocketFlags) Stack Trace : at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) Update We're still working on it. Originally there was a route issue, which was resolved. We're still getting the inner exception with socket errors. We had MS support involved today, and they looked at some traces and network captures. The web service host does round-robin DNS, and they may be responding on a different IP address for the syn syn/ack from one ip, and the next from a different ip. This is not good. This is likely quite specific to our situation, but perhaps it applies to others as well. Microsoft Network Monitor and an application trace got us the information we needed.

  Read the article

• Java, Jacob and Microsoft Outlook events: Receiving "Can't find event iid" Error

  - by Adam Paynter

  I am writing a Java program that interacts with Microsoft Outlook using the Jacob library (bridges COM and Java). This program creates a new MailItem, displaying its Inspector window to the user. I wish to subscribe to the inspector's Close event to know when the user is finished editing their mail item. To subscribe to the event, I followed the instructions in Jacob's documentation (about 2⁄3 down the page): The current [event] model is conceptually similar to the Visual Basic WithEvents construct. Basically, I provide a class called com.jacob.com.DispatchEvents which has a constructor that takes a source object (of type com.jacob.com.Dispatch) and a target object (of any type). The source object is queried for its IConnectionPointContainer interface and I attempt to obtain an IConnectionPoint for its default source interface (which I obtain from IProvideClassInfo). At the same time, I also create a mapping of DISPID's for the default source interface to the actual method names. I then use the method names to get jmethodID handles from the target Java object. All event methods currently must have the same signature: one argument which is a Java array of Variants, and a void return type. Here is my InspectorEventHandler class, conforming to Jacob's documentation: public class InspectorEventHandler { public void Activate(Variant[] arguments) { } public void BeforeMaximize(Variant[] arguments) { } public void BeforeMinimize(Variant[] arguments) { } public void BeforeMove(Variant[] arguments) { } public void BeforeSize(Variant[] arguments) { } public void Close(Variant[] arguments) { System.out.println("Closing"); } public void Deactivate(Variant[] arguments) { } public void PageChange(Variant[] arguments) { } } And here is how I subscribe to the events using this InspectorEventHandler class: Object outlook = new ActiveXComponent("Outlook.Application"); Object mailItem = Dispatch.call(outlook, "CreateItem", 0).getDispatch(); Object inspector = Dispatch.get(mailItem, "GetInspector").getDispatch(); InspectorEventHandler eventHandler = new InspectorEventHandler(); // This supposedly registers eventHandler with the inspector new DispatchEvents((Dispatch) inspector, eventHandler); However, the last line fails with the following exception: Exception in thread "main" com.jacob.com.ComFailException: Can't find event iid at com.jacob.com.DispatchEvents.init(Native Method) at com.jacob.com.DispatchEvents.(DispatchEvents.java) at cake.CakeApplication.run(CakeApplication.java:30) at cake.CakeApplication.main(CakeApplication.java:15) couldn't get IProvideClassInfo According to Google, a few others have also received this error. Unfortunately, none of them have received an answer. I am using version 1.7 of the Jacob library, which claims to prevent this problem: Version 1.7 also includes code to read the type library directly from the progid. This makes it possible to work with all the Microsoft Office application events, as well as IE5 events. For an example see the samples/test/IETest.java example. I noticed that the aforementioned IETest.java file subscribes to events like this: new DispatchEvents((Dispatch) ieo, ieE,"InternetExplorer.Application.1"); Therefore, I tried subscribing to my events in a similar manner: new DispatchEvents((Dispatch) inspector, eventHandler, "Outlook.Application"); new DispatchEvents((Dispatch) inspector, eventHandler, "Outlook.Application.1"); new DispatchEvents((Dispatch) inspector, eventHandler, "Outlook.Application.12"); All these attempts failed with the same error.

  Read the article

• Properly clean up excel interop objects revisited: Wrapper objects

  - by chiccodoro

  Hi all, Excel 2007 Hangs When Closing via .NET How to properly clean up Excel interop objects in C# How to properly clean up interop objects in C# All of these struggle with the problem that C# does not release the Excel COM objects properly after using them. There are mainly two directions of working around this issue: Kill the Excel process when Excel is not used anymore. Take care to assign each COM object used explicitly to a variable and to Marshal.ReleaseComObject all of these. Some have stated that 2 is too tedious and there is always some uncertainty whether you forget to stick to this rule at some places in the code. Still 1 seems dirty and dangerous to me, also I could imagine that in an environment with restricted access killing processes is not allowed. So I've been thinking about solving 2 by creating another proxy object model which mimics the Excel object model (for me, it would suffice to implement the objects I actually need). The principle would look as follows: Each Excel Interop class has its proxy which wraps an object of that class. The proxy releases the COM object in its destructor. The proxy mimics the interface of the Interop class (maybe by inheriting it). Any methods that usually return another COM object return a proxy instead. The other methods simply delegate the implementation to the inner COM object. This is a rough sketch of the code: public class Application : Microsoft.Office.Interop.Excel.Application { private Microsoft.Office.Interop.Excel.Application innerApplication = new Microsoft.Office.Interop.Excel.Application innerApplication(); ~Application() { Marshal.ReleaseCOMObject(innerApplication); } public Workbooks Workbooks { get { return new Workbooks(innerApplication.Workbooks); } } } public class Workbooks { private Microsoft.Office.Interop.Excel.Workbooks innerWorkbooks; Workbooks(Microsoft.Office.Interop.Excel.Workbooks innerWorkbooks) { this.innerWorkbooks = innerWorkbooks; } ~Workbooks() { Marshal.ReleaseCOMObject(innerWorkbooks); } } My questions to you are in particular: Who finds this a bad idea and why? Who finds this a gread idea? If so, why hasn't anybody implemented/published such a model yet? Just due to the effort, or am I missing a killing problem with that idea? Is it impossible/bad/dangerous to do the ReleaseCOMObject in the destructor? (I've only seen proposals to put it in a Dispose() rather than in a destructor - why?) If the approach makes sense, any suggestions to improve it?

  Read the article

• WIA Automation for scanner color intent is not working

  - by Mike Nicholson

  I cannot get my Canon Pixma MP150 to scan a color scan from c# code. The following code is resulting in a black and white image, or if I change the value of 6146 to 2 then a grayscale image is created. I would like to be able to have a color scan from code. I know the scanner does color images because I can do one through the xp wizard in "scanners and camera". Can anyone help me figure out what value I am not setting for a color scan. All documentation and examples I can find just say to change the value of 6146. Thank you for taking the time to read this! private void ScanAndSaveOnePage () { WIA.CommonDialog Dialog1 = new WIA.CommonDialogClass(); WIA.DeviceManager DeviceManager1 = new WIA.DeviceManagerClass(); System.Object Object1 = null; System.Object Object2 = null; WIA.Device Scanner = null; Scanner = Dialog1.ShowSelectDevice(WIA.WiaDeviceType.ScannerDeviceType, false, false); WIA.Item Item1 = Scanner.Items[1]; setItem(Item1, "6146", 1); setItem(Item1, "6147", 150); setItem(Item1, "6148", 150); setItem(Item1, "6151", 150 * 8.5); setItem(Item1, "6152", 150 * 11); WIA.ImageFile Image1 = new WIA.ImageFile(); WIA.ImageProcess ImageProcess1 = new WIA.ImageProcess(); Object1 = (Object)"Convert"; ImageProcess1.Filters.Add(ImageProcess1.FilterInfos.get_Item(ref Object1).FilterID, 0); Object1 = (Object)"FormatID"; Object2 = (Object)WIA.FormatID.wiaFormatBMP; ImageProcess1.Filters[1].Properties.get_Item(ref Object1).set_Value(ref Object2); Object1 = null; Object2 = null; Image1 = (WIA.ImageFile)Item1.Transfer(WIA.FormatID.wiaFormatBMP); string DestImagePath = @"C:\test.bmp"; File.Delete(DestImagePath); Image1.SaveFile(DestImagePath); } private void setItem (IItem item, object property, object value) { WIA.Property aProperty = item.Properties.get_Item(ref property); aProperty.set_Value(ref value); }

  Read the article

• DynamicMethod for ConstructorInfo.Invoke, what do I need to consider?

  - by Lasse V. Karlsen

  My question is this: If I'm going to build a DynamicMethod object, corresponding to a ConstructorInfo.Invoke call, what types of IL do I need to implement in order to cope with all (or most) types of arguments, when I can guarantee that the right type and number of arguments is going to be passed in before I make the call? Background I am on my 3rd iteration of my IoC container, and currently doing some profiling to figure out if there are any areas where I can easily shave off large amounts of time being used. One thing I noticed is that when resolving to a concrete type, ultimately I end up with a constructor being called, using ConstructorInfo.Invoke, passing in an array of arguments that I've worked out. What I noticed is that the invoke method has quite a bit of overhead, and I'm wondering if most of this is just different implementations of the same checks I do. For instance, due to the constructor matching code I have, to find a matching constructor for the predefined parameter names, types, and values that I have passed in, there's no way this particular invoke call will not end up with something it should be able to cope with, like the correct number of arguments, in the right order, of the right type, and with appropriate values. When doing a profiling session containing a million calls to my resolve method, and then replacing it with a DynamicMethod implementation that mimics the Invoke call, the profiling timings was like this: ConstructorInfo.Invoke: 1973ms DynamicMethod: 93ms This accounts for around 20% of the total runtime of this profiling application. In other words, by replacing the ConstructorInfo.Invoke call with a DynamicMethod that does the same, I am able to shave off 20% runtime when dealing with basic factory-scoped services (ie. all resolution calls end up with a constructor call). I think this is fairly substantial, and warrants a closer look at how much work it would be to build a stable DynamicMethod generator for constructors in this context. So, the dynamic method would take in an object array, and return the constructed object, and I already know the ConstructorInfo object in question. Therefore, it looks like the dynamic method would be made up of the following IL: l001: ldarg.0 ; the object array containing the arguments l002: ldc.i4.0 ; the index of the first argument l003: ldelem.ref ; get the value of the first argument l004: castclass T ; cast to the right type of argument (only if not "Object") (repeat l001-l004 for all parameters, l004 only for non-Object types, varying l002 constant from 0 and up for each index) l005: newobj ci ; call the constructor l006: ret Is there anything else I need to consider? Note that I'm aware that creating dynamic methods will probably not be available when running the application in "reduced access mode" (sometimes the brain just won't give up those terms), but in that case I can easily detect that and just calling the original constructor as before, with the overhead and all.

  Read the article

• Reflection - SetValue of array within class?

  - by Jaymz87

  OK, I've been working on something for a while now, using reflection to accomplish a lot of what I need to do, but I've hit a bit of a stumbling block... I'm trying to use reflection to populate the properties of an array of a child property... not sure that's clear, so it's probably best explained in code: Parent Class: Public Class parent Private _child As childObject() Public Property child As childObject() Get Return _child End Get Set(ByVal value As child()) _child = value End Set End Property End Class Child Class: Public Class childObject Private _name As String Public Property name As String Get Return _name End Get Set(ByVal value As String) _name = value End Set End Property Private _descr As String Public Property descr As String Get Return _descr End Get Set(ByVal value As String) _descr = value End Set End Property End Class So, using reflection, I'm trying to set the values of the array of child objects through the parent object... I've tried several methods... the following is pretty much what I've got at the moment (I've added sample data just to keep things simple): Dim Results(1) As String Results(0) = "1,2" Results(1) = "2,3" Dim parent As New parent Dim child As childObject() = New childObject() {} Dim PropInfo As PropertyInfo() = child.GetType().GetProperties() Dim i As Integer = 0 For Each res As String In Results Dim ResultSet As String() = res.Split(",") ReDim child(i) Dim j As Integer = 0 For Each PropItem As PropertyInfo In PropInfo PropItem.SetValue(child, ResultSet(j), Nothing) j += 1 Next i += 1 Next parent.child = child This fails miserably on PropItem.SetValue with ArgumentException: Property set method not found. Anyone have any ideas? @Jon :- Thanks, I think I've gotten a little further, by creating individual child objects, and then assigning them to an array... The issue is now trying to get that array assigned to the parent object (using reflection). It shouldn't be difficult, but I think the problem comes because I don't necessarily know the parent/child types. I'm using reflection to determine which parent/child is being passed in. The parent always has only one property, which is an array of the child object. When I try assigning the child array to the parent object, I get a invalid cast exception saying it can't convert Object[] to . EDIT: Basically, what I have now is: Dim PropChildInfo As PropertyInfo() = ResponseObject.GetType().GetProperties() For Each PropItem As PropertyInfo In PropChildInfo PropItem.SetValue(ResponseObject, ResponseChildren, Nothing) Next ResponseObject is an instance of the parent Class, and ResponseChildren is an array of the childObject Class. This fails with: Object of type 'System.Object[]' cannot be converted to type 'childObject[]'.

  Read the article

• Unity framework - creating & disposing Entity Framework datacontexts at the appropriate time

  - by TobyEvans

  Hi there, With some kindly help from StackOverflow, I've got Unity Framework to create my chained dependencies, including an Entity Framework datacontext object: using (IUnityContainer container = new UnityContainer()) { container.RegisterType<IMeterView, Meter>(); container.RegisterType<IUnitOfWork, CommunergySQLiteEntities>(new ContainerControlledLifetimeManager()); container.RegisterType<IRepositoryFactory, SQLiteRepositoryFactory>(); container.RegisterType<IRepositoryFactory, WCFRepositoryFactory>("Uploader"); container.Configure<InjectedMembers>() .ConfigureInjectionFor<CommunergySQLiteEntities>( new InjectionConstructor(connectionString)); MeterPresenter meterPresenter = container.Resolve<MeterPresenter>(); this works really well in creating my Presenter object and displaying the related view, I'm really pleased. However, the problem I'm running into now is over the timing of the creation and disposal of the Entity Framework object (and I suspect this will go for any IDisposable object). Using Unity like this, the SQL EF object "CommunergySQLiteEntities" is created straight away, as I've added it to the constructor of the MeterPresenter public MeterPresenter(IMeterView view, IUnitOfWork unitOfWork, IRepositoryFactory cacheRepository) { this.mView = view; this.unitOfWork = unitOfWork; this.cacheRepository = cacheRepository; this.Initialize(); } I felt a bit uneasy about this at the time, as I don't want to be holding open a database connection, but I couldn't see any other way using the Unity dependency injection. Sure enough, when I actually try to use the datacontext, I get this error: ((System.Data.Objects.ObjectContext)(unitOfWork)).Connection '((System.Data.Objects.ObjectContext)(unitOfWork)).Connection' threw an exception of type 'System.ObjectDisposedException' System.Data.Common.DbConnection {System.ObjectDisposedException} My understanding of the principle of IoC is that you set up all your dependencies at the top, resolve your object and away you go. However, in this case, some of the child objects, eg the datacontext, don't need to be initialised at the time the parent Presenter object is created (as you would by passing them in the constructor), but the Presenter does need to know about what type to use for IUnitOfWork when it wants to talk to the database. Ideally, I want something like this inside my resolved Presenter: using(IUnitOfWork unitOfWork = new NewInstanceInjectedUnitOfWorkType()) { //do unitOfWork stuff } so the Presenter knows what IUnitOfWork implementation to use to create and dispose of straight away, preferably from the original RegisterType call. Do I have to put another Unity container inside my Presenter, at the risk of creating a new dependency? This is probably really obvious to a IoC guru, but I'd really appreciate a pointer in the right direction thanks Toby

  Read the article

• Reflection to access advanced telephony features

  - by Tyler

  I am trying to use reflection to access some advanced features of the telephony api not published. Currently I am having trouble instantiating a serviceManager object that is needed to get the "phone" service as a binder which I can then use to instantiate a telephony object which is needed to make a call, end call, etc... currently when I make the call serviceManagerObject = tempInterfaceMethod.invoke(null, new Object[] { new Binder() }); it returns a nullPointerException. I believe this has to due with creating a new Binder instead of sending the appropriate binder (which I am unsure of which one is appropriate) public void placeReflectedCall() throws ClassNotFoundException, SecurityException, NoSuchMethodException, IllegalArgumentException, IllegalAccessException, InvocationTargetException, InstantiationException { String serviceManagerName = "android.os.IServiceManager"; String serviceManagerNativeName = "android.os.ServiceManagerNative"; String telephonyName = "com.android.internal.telephony.ITelephony"; Class telephonyClass; Class telephonyStubClass; Class serviceManagerClass; Class serviceManagerStubClass; Class serviceManagerNativeClass; Class serviceManagerNativeStubClass; Method telephonyCall; Method telephonyEndCall; Method telephonyAnswerCall; Method getDefault; Method[] temps; Constructor[] serviceManagerConstructor; // Method getService; Object telephonyObject; Object serviceManagerObject; String number = "1111111111"; telephonyClass = Class.forName(telephonyName); telephonyStubClass = telephonyClass.getClasses()[0]; serviceManagerClass = Class.forName(serviceManagerName); serviceManagerNativeClass = Class.forName(serviceManagerNativeName); Method getService = // getDefaults[29]; serviceManagerClass.getMethod("getService", String.class); Method tempInterfaceMethod = serviceManagerNativeClass.getMethod( "asInterface", IBinder.class); // this does not work serviceManagerObject = tempInterfaceMethod.invoke(null, new Object[] { new Binder() }); IBinder retbinder = (IBinder) getService.invoke(serviceManagerObject, "phone"); Method serviceMethod = telephonyStubClass.getMethod("asInterface", IBinder.class); telephonyObject = serviceMethod .invoke(null, new Object[] { retbinder }); telephonyCall = telephonyClass.getMethod("call", String.class); telephonyEndCall = telephonyClass.getMethod("endCall"); telephonyAnswerCall = telephonyClass.getMethod("answerRingingCall"); telephonyCall.invoke(telephonyObject, number); } Thanks in advance for any answers.

  Read the article

• WPF: Binding to ObservableCollection in ControlTemplate is not updated

  - by Julian Lettner

  I created a ControlTemplate for my custom control MyControl. MyControl derives from System.Windows.Controls.Control and defines the following property public ObservableCollection<MyControl> Children{ get; protected set; }. To display the nested child controls I am using an ItemsControl (StackPanel) which is surrounded by a GroupBox. If there are no child controls, I want to hide the GroupBox. Everything works fine on application startup: The group box and child controls are shown if the Children property initially contained at least one element. In the other case it is hidden. The problem starts when the user adds a child control to an empty collection. The GroupBox's visibility is still collapsed. The same problem occurs when the last child control is removed from the collection. The GroupBox is still visible. Another symptom is that the HideEmptyEnumerationConverter converter does not get called. Adding/removing child controls to non empty collections works as expected. Whats wrong with the following binding? Obviously it works once but does not get updated, although the collection I am binding to is of type ObservableCollection. <!-- Converter for hiding empty enumerations --> <Common:HideEmptyEnumerationConverter x:Key="hideEmptyEnumerationConverter"/> <!--- ... ---> <ControlTemplate TargetType="{x:Type MyControl}"> <!-- ... other stuff that works ... --> <!-- Child components --> <GroupBox Header="Children" Visibility="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=Children, Converter={StaticResource hideEmptyEnumerationConverter}}"> <ItemsControl ItemsSource="{TemplateBinding Children}"/> </GroupBox> </ControlTemplate> . [ValueConversion(typeof (IEnumerable), typeof (Visibility))] public class HideEmptyEnumerationConverter : IValueConverter { #region IValueConverter Members public object Convert(object value, Type targetType, object parameter, CultureInfo culture) { int itemCount = ((IEnumerable) value).Cast<object>().Count(); return itemCount == 0 ? Visibility.Collapsed : Visibility.Visible; } public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture) { throw new NotImplementedException(); } #endregion } Another, more general question: How do you guys debug bindings? Found this (http://bea.stollnitz.com/blog/?p=52) but still I find it very hard to do. I am glad for any help or suggestion.

  Read the article

• EJB3 Transaction Propogation

  - by Matt S.

  I have a stateless bean something like: @Stateless public class MyStatelessBean implements MyStatelessLocal, MyStatelessRemote { @PersistenceContext(unitName="myPC") private EntityManager mgr; @TransationAttribute(TransactionAttributeType.SUPPORTED) public void processObjects(List<Object> objs) { // this method just processes the data; no need for a transaction for(Object obj : objs) { this.process(obj); } } @TransationAttribute(TransactionAttributeType.REQUIRES_NEW) public void process(Object obj) { // do some work with obj that must be in the scope of a transaction this.mgr.merge(obj); // ... this.mgr.merge(obj); // ... this.mgr.flush(); } } The typically usage then is the client would call processObjects(...), which doesn't actually interact with the entity manager. It does what it needs to do and calls process(...) individually for each object to process. The duration of process(...) is relatively short, but processObjects(...) could take a very long time to run through everything. Therefore I don't want it to maintain an open transaction. I do need the individual process(...) operations to operate within their own transaction. This should be a new transaction for every call. Lastly I'd like to keep the option open for the client to call process(...) directly. I've tried a number of different transaction types: never, not supported, supported (on processObjects) and required, requires new (on process) but I get TransactionRequiredException every time merge() is called. I've been able to make it work by splitting up the methods into two different beans: @Stateless @TransationAttribute(TransactionAttributeType.NOT_SUPPORTED) public class MyStatelessBean1 implements MyStatelessLocal1, MyStatelessRemote1 { @EJB private MyStatelessBean2 myBean2; public void processObjects(List<Object> objs) { // this method just processes the data; no need for a transaction for(Object obj : objs) { this.myBean2.process(obj); } } } @Stateless public class MyStatelessBean2 implements MyStatelessLocal2, MyStatelessRemote2 { @PersistenceContext(unitName="myPC") private EntityManager mgr; @TransationAttribute(TransactionAttributeType.REQUIRES_NEW) public void process(Object obj) { // do some work with obj that must be in the scope of a transaction this.mgr.merge(obj); // ... this.mgr.merge(obj); // ... this.mgr.flush(); } } but I'm still curious if it's possible to accomplish this in one class. It looks to me like the transaction manager only operates at the bean level, even when individual methods are given more specific annotations. So if I mark one method in a way to prevent the transaction from starting calling other methods within that same instance will also not create a transaction, no matter how they're marked? I'm using JBoss Application Server 4.2.1.GA, but non-specific answers are welcome / preferred.

  Read the article

• C# Nested Property Accessing overloading OR Sequential Operator Overloading

  - by Tim

  Hey, I've been searching around for a solution to a tricky problem we're having with our code base. To start, our code resembles the following: class User { int id; int accountId; Account account { get { return Account.Get(accountId); } } } class Account { int accountId; OnlinePresence Presence { get { return OnlinePresence.Get(accountId); } } public static Account Get(int accountId) { // hits a database and gets back our object. } } class OnlinePresence { int accountId; bool isOnline; public static OnlinePresence Get(int accountId) { // hits a database and gets back our object. } } What we're often doing in our code is trying to access the account Presence of a user by doing var presence = user.Account.Presence; The problem with this is that this is actually making two requests to the database. One to get the Account object, and then one to get the Presence object. We could easily knock this down to one request if we did the following : var presence = UserPresence.Get(user.id); This works, but sort of requires developers to have an understanding of the UserPresence class/methods that would be nice to eliminate. I've thought of a couple of cool ways to be able to handle this problem, and was wondering if anyone knows if these are possible, if there are other ways of handling this, or if we just need to think more as we're coding and do the UserPresence.Get instead of using properties. Overload nested accessors. It would be cool if inside the User class I could write some sort of "extension" that would say "any time a User object's Account property's Presence object is being accessed, do this instead". Overload the . operator with knowledge of what comes after. If I could somehow overload the . operator only in situations where the object on the right is also being "dotted" it would be great. Both of these seem like things that could be handled at compile time, but perhaps I'm missing something (would reflection make this difficult?). Am I looking at things completely incorrectly? Is there a way of enforcing this that removes the burden from the user of the business logic? Thanks! Tim

  Read the article

• Wrapping a pure virtual method with multiple arguments with Boost.Python

  - by fallino

  Hello, I followed the "official" tutorial and others but still don't manage to expose this pure virtual method (getPeptide) : ms_mascotresults.hpp class ms_mascotresults { public: ms_mascotresults(ms_mascotresfile &resfile, const unsigned int flags, double minProbability, int maxHitsToReport, const char * unigeneIndexFile, const char * singleHit = 0); ... virtual ms_peptide getPeptide(const int q, const int p) const = 0; } ms_mascotresults.cpp #include <boost/python.hpp> using namespace boost::python; #include "msparser.hpp" // which includes "ms_mascotresults.hpp" using namespace matrix_science; #include <iostream> #include <sstream> struct ms_mascotresults_wrapper : ms_mascotresults, wrapper<ms_mascotresults> { ms_peptide getPeptide(const int q, const int p) { this->get_override("getPeptide")(q); this->get_override("getPeptide")(p); } }; BOOST_PYTHON_MODULE(ms_mascotresults) { class_<ms_mascotresults_wrapper, boost::noncopyable>("ms_mascotresults") .def("getPeptide", pure_virtual(&ms_mascotresults::getPeptide) ) ; } Here are the bjam's errors : /usr/local/boost_1_42_0/boost/python/object/value_holder.hpp:66: error: cannot declare field ‘boost::python::objects::value_holder<ms_mascotresults_wrapper>::m_held’ to be of abstract type ‘ms_mascotresults_wrapper’ ms_mascotresults.cpp:12: note: because the following virtual functions are pure within ‘ms_mascotresults_wrapper’: ... include/ms_mascotresults.hpp:334: note: virtual matrix_science::ms_peptide matrix_science::ms_mascotresults::getPeptide(int, int) const ms_mascotresults.cpp: In constructor ‘ms_mascotresults_wrapper::ms_mascotresults_wrapper()’: ms_mascotresults.cpp:12: error: no matching function for call to ‘matrix_science::ms_mascotresults::ms_mascotresults()’ include/ms_mascotresults.hpp:284: note: candidates are: matrix_science::ms_mascotresults::ms_mascotresults(matrix_science::ms_mascotresfile&, unsigned int, double, int, const char*, const char*) include/ms_mascotresults.hpp:109: note: matrix_science::ms_mascotresults::ms_mascotresults(const matrix_science::ms_mascotresults&) ... /usr/local/boost_1_42_0/boost/python/object/value_holder.hpp: In constructor ‘boost::python::objects::value_holder<Value>::value_holder(PyObject*) [with Value = ms_mascotresults_wrapper]’: /usr/local/boost_1_42_0/boost/python/object/value_holder.hpp:137: note: synthesized method ‘ms_mascotresults_wrapper::ms_mascotresults_wrapper()’ first required here /usr/local/boost_1_42_0/boost/python/object/value_holder.hpp:137: error: cannot allocate an object of abstract type ‘ms_mascotresults_wrapper’ ms_mascotresults.cpp:12: note: since type ‘ms_mascotresults_wrapper’ has pure virtual functions So I tried to change the constructor's signature by : BOOST_PYTHON_MODULE(ms_mascotresults) { //class_<ms_mascotresults_wrapper, boost::noncopyable>("ms_mascotresults") class_<ms_mascotresults_wrapper, boost::noncopyable>("ms_mascotresults", init<ms_mascotresfile &, const unsigned int, double, int, const char *,const char *>()) .def("getPeptide", pure_virtual(&ms_mascotresults::getPeptide) ) Giving these errors : /usr/local/boost_1_42_0/boost/python/object/value_holder.hpp:66: error: cannot declare field ‘boost::python::objects::value_holder<ms_mascotresults_wrapper>::m_held’ to be of abstract type ‘ms_mascotresults_wrapper’ ms_mascotresults.cpp:12: note: because the following virtual functions are pure within ‘ms_mascotresults_wrapper’: include/ms_mascotresults.hpp:334: note: virtual matrix_science::ms_peptide matrix_science::ms_mascotresults::getPeptide(int, int) const ... ms_mascotresults.cpp:24: instantiated from here /usr/local/boost_1_42_0/boost/python/object/value_holder.hpp:137: error: no matching function for call to ‘ms_mascotresults_wrapper::ms_mascotresults_wrapper(matrix_science::ms_mascotresfile&, const unsigned int&, const double&, const int&, const char* const&, const char* const&)’ ms_mascotresults.cpp:12: note: candidates are: ms_mascotresults_wrapper::ms_mascotresults_wrapper(const ms_mascotresults_wrapper&) ms_mascotresults.cpp:12: note: ms_mascotresults_wrapper::ms_mascotresults_wrapper() If I comment the virtual function getPeptide in the .hpp, it builds perfectly with this constructor : class_<ms_mascotresults>("ms_mascotresults", init<ms_mascotresfile &, const unsigned int, double, int, const char *,const char *>() ) So I'm a bit lost...

  Read the article

• How do I sort an array of Person Objects by using compareto()?

  - by Adam

  Here is my code: > import java.util.Scanner; import java.util.Arrays; /** This class tests the Person class. */ public class PersonDemo { public static void main(String[] args) { int count = 0; Scanner in = new Scanner(System.in); boolean more = false; Person first = null; Person last = null; while (more) { System.out.println( "Please enter the person's name or a blank line to quit"); String name = in.nextLine(); if (name.equals("")) more = false; else { Person p = new Person(name); //new person object created with inputted name Person[] people = new Person[10]; //new array of 10 person objects people[count] = p; //declare person object with index of variable count as the new person object first = people[count]; // I have no idea what to do here. This is where I'm stuck. last = people[count]; // I can't figure out what to do with this either. first.compareTo(p); //call compareTo method on first and new person object last.compareTo(p); //call compareTo method on last and new person object count++; // increase count variable } } System.out.println("First: " + first.toString()); System.out.println("Last: " + last.toString()); } } And the Person class: /** A person with a name. */ public class Person implements Comparable { /** * Constructs a Person with a name. * @param aName the person's name */ public Person(String aName) { name = aName; } public String getName() { return name; } @Override public int compareTo(Object otherObject) { Person other = (Person)otherObject; if (name.compareTo(other.name) < 0) return -1; if (name.compareTo(other.name) > 0) return 1; return 0; } /** Returns a string representation of the object. @return name of Person */ public String toString() { return "[name=" + name + "]"; } private String name; }

  Read the article

• How to efficiently save changes made in UI/main thread with Core Data?

  - by Jaanus

  So, there have been several posts here about importing and saving data from an external data source into Core Data. Apple documents a reasonable pattern for this: "import and save on background thread, merge saved objects to main thread." All fine and good. I have a related but different problem: the user is modifying data in the UI and main thread, and thus modifies state of some objects in the managed object context (MOC). I would like to save these changes from time to time. What is a good way to do that? Now, you could say that I could do the same: create a background thread with its own MOC and pass the changed objectID-s there. The catch-22 for me with this is that an object's ID changes when it is saved, and I cannot guarantee the order of things happening. I may end up passing a different objectID into the background thread for the same object, based on whether the object has been previously saved or not, and I don't know if Core Data can resolve this and see that different objectID-s are pointing to the same object and not create duplicates for me. (I could test this, but I'm lazywebbing with this question first.) One thought I had: I could always do MOC saves on a background thread, and queue them up with operationqueue, so that there is always only one save in progress. I would not create a new MOC, I would just use the same MOC as in main thread. Now, this is not thread safe and when someone modifies the MOC in main thread while it is being saved in background thread, the results will probably be catastrophic. But, minus the thread safety, you can see what kind of solution I'd wish for. To be clear, the problem I need to fix is that if I just do the save in main thread, it blocks the UI for an unacceptably long period of time, I want to move the save to background thread. So, questions: what about the reasoning of an object ID changing during saving, and Core Data being able to resolve them to the same object? Would this be the right way of addressing this problem? any other good ways of doing this?

  Read the article

• SELECT SQL statement problem when getting info from an accdb in VB.Net

  - by Shane Fagan

  Hi again all, im getting the error below for this SQL statement in VB.Net SQLString = "SELECT AllPropertyDetails.PropertyID, Street, Town, County, Acres, Quotas, ResidenceDetails, Status, HighestBid, AskingPrice FROM AllPropertyDetails " SQLString += "INNER JOIN Land ON AllPropertyDetails.PropertyID = Land.PropertyID " SQLString += "WHERE Deleted = False " If PriceRadioButton.Checked = True Then SQLString += "ORDER BY AskingPrice ASC" ElseIf AcresRadioButton.Checked = True Then SQLString += "ORDER BY Acres ASC" End If Any ideas why its not working? The fields in the DB and the table names seem ok but its not working :/ System.InvalidOperationException was unhandled Message="An error occurred creating the form. See Exception.InnerException for details. The error is: No value given for one or more required parameters." Source="AuctioneerProject" StackTrace: at AuctioneerProject.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190 at AuctioneerProject.My.MyProject.MyForms.get_LandReport() at AuctioneerProject.ReportsMenu.LandButton_Click(Object sender, EventArgs e) in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\ReportsMenu.vb:line 4 at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.Run(ApplicationContext context) at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine) at AuctioneerProject.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Data.OleDb.OleDbException ErrorCode=-2147217904 Message="No value given for one or more required parameters." Source="Microsoft Office Access Database Engine" StackTrace: at System.Data.OleDb.OleDbCommand.ExecuteCommandTextErrorHandling(OleDbHResult hr) at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.ExecuteReader() at AuctioneerProject.LandReport.load_Land() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 37 at AuctioneerProject.LandReport.PriceRadioButton_CheckedChanged(Object sender, EventArgs e) in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 79 at System.Windows.Forms.RadioButton.OnCheckedChanged(EventArgs e) at System.Windows.Forms.RadioButton.set_Checked(Boolean value) at AuctioneerProject.LandReport.InitializeComponent() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.designer.vb:line 40 at AuctioneerProject.LandReport..ctor() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 5 InnerException:

  Read the article

• PagerView overlapping PagerTabStrip / PagerTitleStrip

  - by user1256169

  I've been trying for about a week to get my PagerView not to overlap the TitleStrip. I've tried absolutely everything I can think of, and one StackOverflow question that looked like the same question, had an answer that wasn't applicable. It appears that both the PagerTitleStrip and the TextView start at 0,0 (left,top) Any help would be appreciated. Note that I can't use any XML (inc Layout.xml) so it's all done programatically. Here's a full working example of my problem: package com.example.projname; import android.app.Activity; import android.os.Bundle; import android.support.v4.view.PagerAdapter; import android.support.v4.view.PagerTabStrip; import android.support.v4.view.ViewPager; import android.view.Gravity; import android.view.View; import android.view.ViewGroup; import android.view.ViewGroup.LayoutParams; import android.widget.TextView; public class MainActivity extends Activity { @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); MyPagerAdapter myPagerAdapter = new MyPagerAdapter(); PagerTabStrip myPagerTabStrip = new PagerTabStrip(this); myPagerTabStrip.setGravity(Gravity.TOP); ViewPager viewPager = new ViewPager(this); viewPager.addView(myPagerTabStrip, LayoutParams.MATCH_PARENT, LayoutParams.WRAP_CONTENT); viewPager.setAdapter(myPagerAdapter); setContentView(viewPager); } class MyPagerAdapter extends PagerAdapter { public final String[] Titles = { "Title One", "Title Two", "Title Three", "Title Four", "Title Five" }; @Override public int getCount() { return Titles.length; } @Override public boolean isViewFromObject(View view, Object object) { return (view == object); } @Override public CharSequence getPageTitle(int position) { return Titles[position]; } @Override public Object instantiateItem(ViewGroup container, int position) { TextView textView = new TextView(getApplicationContext()); String myString = new String("Page " + (position + 1) + "\r\n"); textView.setText(myString + myString + myString + myString + myString + myString); container.addView(textView); return textView; } @Override public void destroyItem(ViewGroup container, int position, Object object) { container.removeView((View) object); } } } Edit: Adding a screenshot of the problem:

  Read the article

• Ajax doesn't trigger a change-event on a webkit based browser

  - by user319464

  I have adapted a Jquery plugin to for-fill my needs to send GET requests to servers as a way of "pinging" them. I've also added some javascript code to add some fancy features like: depending on the changed value in a that the Jquery plugin changes, it changes the Icon accordingly. To make it all work essentially, I made so that when Ajax gets a "complete" event, it forces a "onChange" event to the span, triggering the javascript validation function to change the status icons. Here is the code of my slightly modified jQuery Plugin: /** * ping for jQuery * * Adapted by Carroarmato0 (to actually work instead of randomly "pinging" nowhere instead of faking * * @auth Jessica * @link http://www.skiyo.cn/demo/jquery.ping/ * */ (function($) { $.fn.ping = function(options) { var opts = $.extend({}, $.fn.ping.defaults, options); return this.each(function() { var ping, requestTime, responseTime ; var target = $(this); var server = target.html(); target.html('<img src="img/loading.gif" alt="loading" />'); function ping() { $.ajax({url: 'http://' + server, type: 'GET', dataType: 'html', timeout: 30000, beforeSend : function() { requestTime = new Date().getTime(); }, complete : function() { responseTime = new Date().getTime(); ping = Math.abs(requestTime - responseTime); if (ping > 2000) { target.text('niet bereikbaar'); } else { target.text(ping + opts.unit); } target.change(); } }); } ping(); opts.interval != 0 && setInterval(ping,opts.interval * 1000); }); }; $.fn.ping.defaults = { interval: 3, unit: 'ms' }; })(jQuery); target.change(); is the code that triggers the "onchange" event in the span: echo " <td class=\"center\"><span id=\"ping$pingNb\" onChange=\"checkServerIcon(this)\" >" .$server['IP'] . "</span></td>"; In Firefox this works, checkServerIcon(this) gets executed and passes the span object to the function. function checkServerIcon(object) { var delayText = object.innerHTML; var delay = delayText.substring(0, delayText.length - 2); if ( isInteger(delay) ) { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/enable_server.png'; } else { if (delay == "bezig.") { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/search_server.png'; } else { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/desable_server.png'; } } } My guess would be that there's something different in WebKit browsers in the way object.parentNode.previousSibling.parentNode. .... works...

  Read the article

• What is `objc_msgSend_fixup`, exactly?

  - by Luis Antonio Botelho O. Leite

  I'm messing around with the Objective-C runtime, trying to compile objective-c code without linking it against libobjc, and I'm having some segmentation fault problems with a program, so I generated an assembly file from it. I think it's not necessary to show the whole assembly file. At some point of my main function, I've got the following line (which, by the way, is the line after which I get the seg fault): callq *l_objc_msgSend_fixup_alloc and here is the definition for l_objc_msgSend_fixup_alloc: .hidden l_objc_msgSend_fixup_alloc # @"\01l_objc_msgSend_fixup_alloc" .type l_objc_msgSend_fixup_alloc,@object .section "__DATA, __objc_msgrefs, coalesced","aw",@progbits .weak l_objc_msgSend_fixup_alloc .align 16 l_objc_msgSend_fixup_alloc: .quad objc_msgSend_fixup .quad L_OBJC_METH_VAR_NAME_ .size l_objc_msgSend_fixup_alloc, 16 I've reimplemented objc_msgSend_fixup as a function (id objc_msgSend_fixup(id self, SEL op, ...)) which returns nil (just to see what happens), but this function isn't even being called (the program crashes before calling it). So, my question is, what is callq *l_objc_msgSend_fixup_alloc supposed to do and what is objc_msgSend_fixup (after l_objc_msgSend_fixup_alloc:) supposed to be (a function or an object)? Edit To better explain, I'm not linking my source file against the objc library. What I'm trying to do is implement some parts of the libray, just to see how it works. Here is an approach of what I've done: #include <stdio.h> #include <objc/runtime.h> @interface MyClass { } +(id) alloc; @end @implementation MyClass +(id) alloc { // alloc the object return nil; } @end id objc_msgSend_fixup(id self, SEL op, ...) { printf("Calling objc_msgSend_fixup()...\n"); // looks for the method implementation for SEL in self's vtable return nil; // Since this is just a test, this function doesn't need to do that } int main(int argc, char *argv[]) { MyClass *m; m = [MyClass alloc]; // At this point, according to the assembly code generated // objc_msgSend_fixup should be called. So, the program should, at least, print // "Calling objc_msgSend_fixup()..." on the screen, but it crashes before // objc_msgSend_fixup() is called... return 0; } If the runtime needs to access the object's vtable to find the correct method to call, what is the function which actually does this? I think it is objc_msgSend_fixup, in this case. So, when objc_msgSend_fixup is called, it receives an object as one of its parameters, and, if this object hasn't been initialized, the function fails. So, I've implemented my own version of objc_msgSend_fixup. According to the assembly source above, it should be called. It doesn't matter if the function is actually looking for the implementation of the selector passed as parameter. I just want objc_msgSend_lookup to be called. But, it's not being called, that is, the function that looks for the object's data is not even being called, instead of being called and cause a fault (because it returns a nil (which, by the way, doesn't matter)). The program seg fails before objc_msgSend_lookup is called...

  Read the article

• Different positions in ViewPager

  - by Kalai Selvan.G

  In my Application am using ViewPager to swipe the images,which comes through webservice as URL. Everything goes smoothly,the problem is while swiping myself getting the position as collapsed one.. Swipe left-right: positions are 1,2,3,4,5,etc.. if i stops swiping at 5th pos and started to Swipe from right-left: positions are 2,1...why this happens? I need to catch the position of the imageURL to find out the ID of the specific image and so i need to download and set it as wallpaper.. Normally while we swipe from right-left,the positions should decrease like 4,3,2,1. Also in debugger mode i got some start position,end position,last position with different values.. Any Clue about ViewPager. Here is my code: public class ImagePagerActivity extends BaseActivity { private ViewPager pager; private DisplayImageOptions options; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.ac_image_pager); Bundle bundle = getIntent().getExtras(); String[] imageUrls = bundle.getStringArray(Extra.IMAGES); int pagerPosition = bundle.getInt(Extra.IMAGE_POSITION, 0); options = new DisplayImageOptions.Builder() .showImageForEmptyUrl(R.drawable.image_for_empty_url) .cacheOnDisc() .decodingType(DecodingType.MEMORY_SAVING) .build(); pager = (ViewPager) findViewById(R.id.pager); pager.setAdapter(new ImagePagerAdapter(imageUrls)); pager.setCurrentItem(pagerPosition); } private class ImagePagerAdapter extends PagerAdapter { private String[] images; private LayoutInflater inflater; ImagePagerAdapter(String[] images) { this.images = images; inflater = getLayoutInflater(); } @Override public void destroyItem(View container, int position, Object object) { ((ViewPager) container).removeView((View) object); } @Override public void finishUpdate(View container) { } @Override public int getCount() { return images.length; } @Override public Object instantiateItem(View view, int position) { final FrameLayout imageLayout = (FrameLayout) inflater.inflate(R.layout.item_pager_image, null); final ImageView imageView = (ImageView) imageLayout.findViewById(R.id.image); final ProgressBar spinner = (ProgressBar) imageLayout.findViewById(R.id.loading); imageLoader.displayImage(images[position], imageView, options, new ImageLoadingListener() { public void onLoadingStarted() { spinner.setVisibility(View.VISIBLE); } public void onLoadingFailed() { spinner.setVisibility(View.GONE); imageView.setImageResource(android.R.drawable.ic_delete); } public void onLoadingComplete() { spinner.setVisibility(View.GONE); } }); ((ViewPager) view).addView(imageLayout, 0); return imageLayout; } @Override public boolean isViewFromObject(View view, Object object) { return view.equals(object); } @Override public void restoreState(Parcelable state, ClassLoader loader) { } @Override public Parcelable saveState() { return null; } @Override public void startUpdate(View container) { } } }

  Read the article

• Matlab wont extract first row & column because of matrix dimensions !

  - by ZaZu

  Hey guys, I am tracking an object that is thrown in air, and this object governs a parabolic pattern. Im tracking the object through a series of 30 images. I managed to exclude all the background and keep the object apparent, then used its centroid to get its coordinates and plot them. Now im supposed to predict where the object is going to fall, so I used polyfit & polyval .. the problem is, matlab says ??? Index exceeds matrix dimensions. Now the centroid creates its own structure with a row and 2 columns. Everytime the object moves in the loop, it updates the first row only .. Here is part of the code : For N=1:30 . . . x=centroid(1,1); % extract first row and column for x y=centroid(1,2); % extract secnd row and column for x plot_xy=plot(x,y) set(plot_xy,'XData',x(1:N),'YData',y(1:N)); fitting=polyfit(x(1:N),y(1:N),2); parabola=plot(x,nan(23,1)); evaluate=polyval(fitting,x); set(parabola,'YData',evaluate) . . end The error message I get is ??? Index exceeds matrix dimensions. It seems that (1:N) is causing the problems .. I honestly do not know why .. But when I remove N, the object is plotted along with its points, but polyfitting wont work, it gives me an error saying : Warning: Polynomial is not unique; degree >= number of data points. > In polyfit at 72 If I made it (1:N-1) or something, it plots more points before it starts giving me the same error (not unique ...) . Any ideas why ?? Thanks alot !!

  Read the article

• Constructor Injection and when to use a Service Locator

  - by Simon

  I'm struggling to understand parts of StructureMap's usage. In particular, in the documentation a statement is made regarding a common anti-pattern, the use of StructureMap as a Service Locator only instead of constructor injection (code samples straight from Structuremap documentation): public ShippingScreenPresenter() { _service = ObjectFactory.GetInstance<IShippingService>(); _repository = ObjectFactory.GetInstance<IRepository>(); } instead of: public ShippingScreenPresenter(IShippingService service, IRepository repository) { _service = service; _repository = repository; } This is fine for a very short object graph, but when dealing with objects many levels deep, does this imply that you should pass down all the dependencies required by the deeper objects right from the top? Surely this breaks encapsulation and exposes too much information about the implementation of deeper objects. Let's say I'm using the Active Record pattern, so my record needs access to a data repository to be able to save and load itself. If this record is loaded inside an object, does that object call ObjectFactory.CreateInstance() and pass it into the active record's constructor? What if that object is inside another object. Does it take the IRepository in as its own parameter from further up? That would expose to the parent object the fact that we're access the data repository at this point, something the outer object probably shouldn't know. public class OuterClass { public OuterClass(IRepository repository) { // Why should I know that ThingThatNeedsRecord needs a repository? // that smells like exposed implementation to me, especially since // ThingThatNeedsRecord doesn't use the repo itself, but passes it // to the record. // Also where do I create repository? Have to instantiate it somewhere // up the chain of objects ThingThatNeedsRecord thing = new ThingThatNeedsRecord(repository); thing.GetAnswer("question"); } } public class ThingThatNeedsRecord { public ThingThatNeedsRecord(IRepository repository) { this.repository = repository; } public string GetAnswer(string someParam) { // create activeRecord(s) and process, returning some result // part of which contains: ActiveRecord record = new ActiveRecord(repository, key); } private IRepository repository; } public class ActiveRecord { public ActiveRecord(IRepository repository) { this.repository = repository; } public ActiveRecord(IRepository repository, int primaryKey); { this.repositry = repository; Load(primaryKey); } public void Save(); private void Load(int primaryKey) { this.primaryKey = primaryKey; // access the database via the repository and set someData } private IRepository repository; private int primaryKey; private string someData; } Any thoughts would be appreciated. Simon

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >