Search Results

Search found 7855 results on 315 pages for 'solutions'.

Page 283/315 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Windows Server 2008 - one MAC Address, assign multiple external IP's to VirtualBoxes running as guests on host

  - by Sise

  Couldn't find any help @ google or here. The scenario: Windows Server 2008 Std x64 on i7-975, 12 GB RAM. The server is running in a data centre. One hardware NIC - RealTek PCIe GBE - one MAC Address. The data centre provides us 4 static external IP's. The first is assigned to the host by default of course. I have ordered all 4 IP's, the data centre can assign the available IP's to the physical MAC address of the given NIC only. This means one NIC, one MAC Address, 4 IP's. Everything works fine so far. Now, what I would like to have: Installed VirtualBox with 1-3 guests running, each gets it's own external IP assigned. Each of it should be an standalone Win Server 2008. It looks like the easiest way would be to put the guests into an virtual subnet and routing all data coming to the 2nd till 4th external IP through to this guests using there subnet IP's. I have been through the VirtualBox User Manuel regarding networking. What's not working: I can't use bridged networking without anything else, because the IP's are assigned to the one MAC address only. I can't use NAT networking because it does not allow access from outside or the host to the guest. I do not wanna use port forwarding. Host-only networking itself would not allow internet access, by sharing the default internet connection of the host, internet is granted from the guest to the outside but not from outside or the host to the guest. InternalNetworking is not really an option here. What I have tried is to create an additional MS Loopback adapter for a routed subnet, where the Vbox guests are in, now the idea was to NAT the internet connection to the loopback 'subnet'. But I can't ping the gateway from the guests. By using route command in the command shell or RRAS (static route, NAT) I didn't get there as well. Solutions like the following do work for the one way, but not for the way back: For your situation, it might be best to use the Host-Only adapter for ICS. Go to the preferences of VB itself and select network. There you can change the configuration for the interface. Set the IP address to 192.168.0.1, netmask 255.255.255.0. Disable the DHCP server if it isn't already and that's it. Now the Guest should get an IP from Windows itself and be able to get onto the internet, while you can also access the Host. Slowly I'm pretty stucked with this topic. There is a possibility I've just overlooked something or just didn't getting it by trying, especially using RRAS, but it's kinda hard to find useful howto's or something in the web. Thanks in advance! Best regards, Simon

  Read the article

• SQL Server database filled the hard drive and freeing up space isn't possible

  - by Jon

  I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

  Read the article

• Virtual Private Hosting DNS configuration

  - by Ciel

  I did a great deal of reading here before posting this because I didn't want to post a duplicate - but I'm on a bit of a deadline and getting frustrated, so here goes... I very, very, very sincerely apologize if this is long winded or hard to read. Please - please just ask for any information or clarification and I will give it as quickly as I possibly can. This has become very frustrating to me and this is the last place I know to turn. I have no experience with setting up DNS, no experience with nameservers, and no peers to go to for help. So this is kind of my last ditch effort. The task of setting up a private server has, through circumstances beyond my control, fallen into my lap. I own a domain (hereafter referred to as yyy.com) and have always used shared hosting - I buy a package and just point it to the domain nameservers they give me. It's always been simple. yyy.com is registered with network solutions Now I have purchased a Virtual Private Hosting package from GoDaddy.com - and it comes with Plesk 11. I have no earthly idea how to begin to get the right nameserver for yyy.com. I have gone through the instructions and have wound up exceedingly frustrated. I have 2 IP addresses from GoDaddy for the server. This is what I have so far, and I cannot tell if it is working (Since propogation takes so long, it is extremely hard to test for me) IP 1 : XX.XX.XX.XX IP 2 : YY.YY.YY.YY (obviously hidden for privacy) Now after going through the documentation setup and waiting a few days, this is the setup I have - and so far it does not appear to be working. Host Record type Value XX.XX.XX.XX / 24 PTR yyy.com. yyy.com. NS ns1.yyy.com. yyy.com. A XX.XX.XX.XX yyy.com. MX (10) mail.yyy.com. ftp.yyy.com. CNAME yyy.com. ipv4.yyy.com. A XX.XX.XX.XX mail.yyy.com. A XX.XX.XX.XX mssql.yyy.com. A XX.XX.XX.XX ns1.yyy.com. A XX.XX.XX.XX ns2.yyy.com. A YY.YY.YY.YY webmail.yyy.com. A XX.XX.XX.XX www.yyy.com. CNAME yyy.com. yyy.com is pointing to both ns1.yyy.com and ns2.yyy.com Can anyone give me some assistance here? This is a learning experience for me and days of documentation have left me very confused.

  Read the article

• Triple (3) Monitors under Linux

  - by widgisoft

  I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

  Read the article

• How to flip video feed that's presented upside down?

  - by Zuul

  Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

  Read the article

• Be your own cloud [closed]

  - by Jedi

  I have reasonably many electronic gadgets that can go LAN or WI-FI. But how do you share and/or syncronize all your files among them? Well, between my laptops and my desktop I use Dropbox. A nice way to share files among computers. But what if your HDD on your laptop is not large enough to carry music, pictures and films. Normally you would buy an extern USB HDD and store them there, but then you cannot reach the files from other computers which are not connected to the USB device. Many would say I should use a solution like a cloud with a disc station or something like that. But my needs are follows: A mass storage which can be reached among devices (laptops, desktops, iPhone, Android phone, XBox or Playstation). Has low power requirements and is silent. Can be reached inside home and it would be nice if it could be reached outside home as well. Cheap I have looked around and I have found an wireless router which can share a USB device: D-Link Wireless N HD Media Router. I thought it would be an interesting solution for a simple local cloud solution. D-Link uses a little program called SharePort Plus which mount the USB device to your computer. Unfortunately is the transfer rate to the USB storage device rather disappointing. The transfer rate was 5.8 Mbps even though the distance between the laptop and the router was 2 meter. The same is happening when I use cable from the computer to the router. Another thing is that SharePort Plus only allows one computer be connected to the device at a time. The last thing was something I could live with. I have search on the Internet for other solutions and found this video from Synology. I'm not sure if their solution is the right one. I think a disc station connected to my home LAN could the right solution. What have you done in your home to store and share files among your computers and game consoles?

  Read the article

• Nginx fastcgi problems with django (double slashes in url?)

  - by wizard

  I'm deploying my first django app. I'm familiar with nginx and fastcgi from deploying php-fpm. I can't get python to recognize the urls. I'm also at a loss on how to debug this further. I'd welcome solutions to this problem and tips on debugging fastcgi problems. Currently I get a 404 page regardless of the url and for some reason a double slash For http://www.site.com/admin/ Page not found (404) Request Method: GET Request URL: http://www.site.com/admin// My urls.py from the debug output - which work in the dev server. Using the URLconf defined in ahrlty.urls, Django tried these URL patterns, in this order: ^listings/ ^admin/ ^accounts/login/$ ^accounts/logout/$ my nginx config server { listen 80; server_name beta.ahrlty.com; access_log /home/ahrlty/ahrlty/logs/access.log; error_log /home/ahrlty/ahrlty/logs/error.log; location /static/ { alias /home/ahrlty/ahrlty/ahrlty/static/; break; } location /media/ { alias /usr/lib/python2.6/dist-packages/django/contrib/admin/media/; break; } location / { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:8001; break; } } and my fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param PATH_INFO $fastcgi_script_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; And lastly I'm running fastcgi from the commandline with django's manage.py. python manage.py runfcgi method=threaded host=127.0.0.1 port=8080 pidfile=mysite.pid minspare=4 maxspare=30 daemonize=false I'm having a hard time debugging this one. Does anything jump out at anybody? Notes nginx version: nginx/0.7.62 Django svn trunk rev 13013

  Read the article

• Sharing files between multiple sites using only desktop software

  - by perlyking

  Our organisation has three sites; a head office, where the master copies of company files are stored, plus two branch offices using only workstations and a NAS or two. Currently we're talking about <10GB. At the main office, we have no admin access to the file server, as this is entirely controlled by the larger institution where we are located. For the same reason, we have no VPN remote access to this network. Instead, we simply have access to a network share using over a Novell LAN. Question: how can we share files between offices in way that minimises latency, i.e. that gives us a mirror of the main network share at each site? (There is little likelihood of concurrent editing, and we can live with the odd file conflict now and again). Up to now branch office staff have had to use GotoMyPC-type solutions to remotely access files held at the main office. Or email. I was hoping to use Google Drive on a dedicated workstation at each office to sync the contents of the network share (head office) or NAS (branch offices) via the cloud, but at my last attempt (29 Jun '12), the Google Drive installer would not allow me to designate the remote network share as the "target" folder. (I chose Google Drive over Drobbox et al. as we already use GMail for corporate mail) The next idea was to use a designated workstation at head office to mirror the network share to a local drive, then use Google Drive to push that to the cloud. This seems a step too far. Nor do I have any good ideas about how to achieve this network/local mirroring, as we can't, for example, install the rsync daemon on the server. I do not want to use Google Drive locally on each workstation as this will inconvenience users, and more importantly, move files off the backed-up, well-maintained (UPS, RAID etc) network share at head office. Our budget is only in the £100's. Should we perhaps just ditch the head office server and use something like JungleDisk? At least this presents the user with what appears to be a mapped drive.

  Read the article

• How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

  - by frLich

  I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - RunAs /savecred: Nice idea, but appears to be completely insecure. - RUNASSPC - Same concept as RunAs, uses "encrypted" files with credentials, but checks in user-space. - Scheduled Tasks - "Fixed" permissions make this difficult, and doesn't support interactive processes even if it did. - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

  Read the article

• Which hardware to VM ratio for Build-Server virtualization?

  - by Martin

  Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

  Read the article

• 20GB+ worth of emails in my /home what is a better solution for that?

  - by Skinkie

  My email storage requirements are outgrowing anything reasonable with respect to local mail storage. As we speak 99% of my home partition is filled with personal mail in Thunderbirds mail dirs. Needless to say, this is just painful, badly searchable and as history has proven me that backups work, but Thunderbird is capable of loosing a lot of mail very easily. Currently I have an remote IMAPS server (Dovecot) running for my daily mail, accessible from anywhere, which from my own practice works efficiently up to about 1000 emails. Then some archive directories should be used to move mail around. I have been looking into DBMail, but I wonder if I make my case worse or better which such solution. None of the supported database employ string deduplication or string compression out of the box, so is this going to help me with 20GB+ mail? What about falling back to a plain old IMAP server? A filesystem like ZFS would support stuff like GZIP transparently, which could help. Could someone share their thoughts? The 20GB mostly consists of mailinglists, and normal mail. Not things like attachments. To add some clarifications; As we speak, my mail is not server side indexed at all - only my new mail arrives at a remote IMAP server. It is all local storage from former POP3 accounts, local mirrored Gmail and IMAP accounts. In my perspective it is not Thunderbird that sucks, its fileformat that sucks. Regarding the 1000 mails. On the road I am using Alpine and MobileMail, quite happy with both of them, but some management is required to actually manage the mail. Sieve helps a lot with that, but browing through 10.000 e-mails is not fun, especially not on a mobile client. I am quite happy with Dovecot, never had any issues with it. I just wonder if this is the way to go. Or if there are any other better solutions. What my question is: what is the best practice solution that allows 20GB+ mails and is -on demand remotely accessible, easy to backup and archive worthy. It doesn't need to be available 24x7. The final approach I took was installing a local IMAP server (Dovecot), configured it for being my archive, using the following guide: http://en.gentoo-wiki.com/wiki/Dovecot/InstallThunderbird

  Read the article

• IE9 Error: There was a pr?blem sending the command to the program

  - by HK1

  I'm working on a new/fresh Windows 7 32bit machine that now has IE9 installed. The user is using the Dell Stardock application as his primary "desktop" (all his links there). When we place an internet link there and click on it we get the following error message: There was a problem sending the command to the program. To me this indicates that IE9 is having trouble going to the website we want to go to, which should get passed as a parameter to the browser when it opens. I don't think this is a StarDock/ObjectDock problem because we also have some other problems with internet links. For example, we cannot move an internet link from the Desktop to the Quick Launch on the task bar. When we do try, it forces us to put the link with the IE icon as part of the IE menu instead of allowing us to have a shortcut there as it's own entry. I should mention however, that links on the desktop and in the taskbar do work as we expect them too (without showing the above error message). It appears that this problem started after installing Windows Updates. Since we installed a whole bunch of updates at once I have no idea which one caused the problem. I did have Google Chrome installed but I uninstalled it since the user wants to use IE. The problem started before I uninstalled Chrome. I also reset the browser settings on IE9. It didn't help. Next I uninstalled IE9 which took me back to IE8. This actually did resolve the problem but the problem came back as soon as I installed IE9 again. We have Verizon Internet Security installed. It's actually a McAfee product rebranded to look like Verizon. I'm not real crazy over this software but the customer has a subscription so we're not planning to change it. I have no reason to believe that this is causing the problem and yet I know that security software is often to blame for strange issues. I've looked at the registry settings for the following keys and everything appears to be ok for every single one of them: HKEY_CLASSES_ROOT\.htm HKEY_CLASSES_ROOT\.html HKEY_CLASSES_ROOT\http\shell\open\command HKEY_CLASSES_ROOT\http\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\https\shell\open\command HKEY_CLASSES_ROOT\https\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\htmlfile\shell\open\command HKEY_CLASSES_ROOT\Microsoft.Website\Shell\Open\Command Edit1: I've found two potential solutions but I won't be able to try them until tomorrow. One is to disable the "Windows Font Cache" service. Another is to clear IE cache and browsing history. I won't be able to try out either solution until tomorrow since this is a remote client's machine. I see there are lots of other suggestions online but if you take the time to read them through you'll see that the other suggestions didn't fix the problem.

  Read the article

• How to find the process(es) which are hogging the machine

  - by Aaron Digulla

  Scenario: All of a sudden, my computer feels sluggish. Mouse moves but windows take ages to open, etc. uptime says the load is 7.69 and raising. What is the fastest way to find out which process(es) are the cause of the load? Now, "top" and similar tools isn't the answer because they either show CPU or memory usage but not both at the same time. What I need is the single command which I might be able to type as it happens - something that will figure out any of System is trying to swap 8GB of RAM to disk because process X ... or process X seeks all over the disk or process X uses 400% CPU" So what I'm looking for is iostat, htop/atop and similar tools run into one with an output like this: 1235 cp - Disk trashing 87 chrome - Uses 2&nbsp;GB of RAM 137 nfs_bench - Uses 95% of the network bandwidth I don't want a tool that gives me some numbers which I can analyze but a tool that tells me exactly which process causes the current load. Assume that the user in front of the keyboard barely knows how to write "process", but the user is quickly overwhelmed when it comes to "resident size", "virtual memory" or "process life cycle". My argument goes like this: A user notices a problem. There can be thousands of reasons ... well, almost :-) The user wants to know the source of the problem. The current solutions give me lots of numbers, and I need to know what these numbers mean. What I'm looking for is a meta tool. 99% of the data is irrelevant to the problem. So what the tool should do is look for processes which hog some resource and list only those along with "this process needs a lot of CPU, this produces many IRQs, this process allocates a lot of RAM (and it's still growing)". This will be a relatively short list. It will be much more simple for someone new to this to locate the culprit from this list than from the output of, say, htop which gives me about 5000 numbers but requires me to fold multi-threaded processes myself (I have 50 lines which say VIRT 2750M but only 16 GB of RAM - the machine ought to swap itself to death but of course, this is a misinterpretation of the data that can happen quickly).

  Read the article

• Can't install .NET framework 4.0 on Windows XP professional version 2002 SP3 (OS bug?)

  - by that guy

  .NET framework 4.0 install fails on Windows XP professional version 2002 SP3: I tried to run setup using "run as..." to make sure the admin rights are used ("protect my computer..." tick was deselected of course). I tried everything: installing using online/offline setup, windows update. install goes a little and then "rolls back" and says: Installation did not succeed .NET Framework 4 has not been installed because: Fatal error during installation. for more information about this problem, see the log file. the full log: http://pastebay.net/1433771 Any ideas? EDIT1: I have found this in the log: "BlockIf: You must install the 32-bit Windows Imaging Component (WIC) before you run Setup. Please visit the Microsoft Download Center to install WIC, and then rerun Setup...." So I found it, and launched "wic_x86_enu.exe" - but it said: WIC Setup error Newer version of update is already on the system. I have already installed: .NET framewrok 2.0 SP2 .NET framewrok 3.0 SP2 .NET framewrok 3.5 SP1 but I need 4.0 . EDIT2: another attempt and it's log. (this time better copy of log file): http://pastebin.com/gmGfbM9a (copy to notepad and save as .htm and open with internet browser). I have tried all the solutions I could find - and nothing helped. I have found something weird: when I formatted the hard drive and installed windows xp again - the .NET framework 4.0 installed ok, but when I plugged my 100Mbit internet cable - the operating system kind off "locked itself" and the bug returned - I could no longer install .NET framework 4.0 again. There was no reason for that to happen, for example I have windows server 2003 in local network, but I don't have active directory enabled on it or anything like that - the server just has some folders shared and thats all (all server's "features" are default). I had the second pc with the same problem - with XP on it too. This seems like the bug of Operating System to me. I couldn't find what was causing the problem. After many days I gave up: backuped everything, formatted HDD and installed Windows 7 professional 64bit. .NET framework 4.0 installed with no problem on it.

  Read the article

• How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

  - by frLich

  I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - RunAs /savecred: Nice idea, but appears to be completely insecure. - RUNASSPC - Same concept as RunAs, uses "encrypted" files with credentials, but checks in user-space. - Scheduled Tasks - "Fixed" permissions make this difficult, and doesn't support interactive processes even if it did. - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

  Read the article

• Incremental RPM package version "numbers" for x.y.z > x.y.z-beta (or alpha, rc, etc)

  - by Jonathan Clarke

  In order to publish RPM packages of several different versions of some software, I'm looking for a way to specify version "numbers" that are considered "upgrades", and include the differentiation of several pre-release versions, such as (in order): "2.4.0 alpha 1", "2.4.0 alpha 2", "2.4.0 alpha 3", "2.4.0 beta 1", "2.4.0 beta 2", "2.4.0 release candidate", "2.4.0 final", "2.4.1", "2.4.2", etc. The main issue I have with this is that RPM considers that "2.4.0" comes earlier than "2.4.0.alpha1", so I can't just add the suffix on the end of the final version number. I could try "2.4.0.alpha1", "2.4.0.beta1", "2.4.0.final", which would work, except for the "release candidate" that would be considered later than "2.4.0.final". An alternative I considered is using the "epoch:" section of the RPM version number (the epoch: prefix is considered before the main version number so that "1:2.4.0" is actually earlier than "2:1.0.0"). By putting a timestamp in the epoch: field, all the versions get ordered as expected by RPM, because their versions appear to increment in time. However, this fails when new releases are made on several major versions at the same time (for example, 2.3.2 is released after 2.4.0, but their version for RPM are "20121003:2.3.2" and "20120928:2.4.0" and systems on 2.3.2 can't get "upgraded" to 2.4.0, because rpm sees it as an older version). In this case, yum/zypper/etc refuse to upgrade to 2.4.0, thus my problem. What version numbers can I use to achieve this, and make sure that RPM always considers the version numbers to be in order. Or if not version numbers, other mechanism in RPM packaging? Note 1: I would like to keep the "Release:" field of the spec file for it's original purpose (several releases of packages, including packaging changes, for the same version of the packaged software). Note 2: This should work on current production versions of major distributions, such as RHEL/CentOS 6 and SLES 11. But I'm interested in solutions that don't, too, so long as they don't involve recompiling rpm! Note 3: On Debian-like systems, dpkg uses a special component in the version number which is the "~" (tilde) character. This causes dpkg to count the suffix as "negative" ordering, so that "2.4.0~anything" will come before "2.4.0". Then, normal ordering applies after the "~", so "2.4.0~alpha1" comes before "2.4.0~beta1" because "alpha" comes before "beta" alphabetically. I'm not necessarily looking to use the same scheme for RPM packages (I'm pretty sure no such equivalent exists), so this is just FYI.

  Read the article

• Configure server on network to analyze traffic

  - by Strajan Sebastian

  I have the following network: http://i.stack.imgur.com/rapkH.jpg I want to send all the traffic from the devices that connect to the 192.168.0.1 router to the 192.168.10.1 router(and eventually to the Internet), by passing through the server and an additional router. Almost 2 days have passed and I can't figure what is wrong. While searching on the Internet for some similar configuration I found some articles that are somehow related to my needs, but the proposed solutions don't seem to work for me. This is a similar article: iptables forwarding between two interface I done the following steps for the configuration process: Set static IP address 192.168.1.90 for the eth0 on the server from the 192.168.1.1 router Set static IP address 192.168.0.90 for the eth1 on the server from the 192.168.0.1 router Forwarded all the traffic from 192.168.0.1 router to the server on eth1 interface witch seems to be working. The router firmware has some option to redirect all the traffic from all the ports to a specified address. Added the following rules on the server(Only the following, there aren't any additional rules): iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT I also tried changing iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT into iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT but still is not working. After adding the following to enable the packet forwarding for the server that is running CentOS: echo 1 /proc/sys/net/ipv4/ip_forward sysctl -w net.ipv4.ip_forward = 1 After a server restart and extra an extra check to see that all the configuration from above are still available I tried to see again if I can ping from a computer connected to 192.168.0.1/24 LAN the router from 192.168.1.1 but it didn't worked. The server has tshark(console wireshark) installed and I found that while sending a ping from a computer connected to 192.168.0.1 router to 192.168.1.1 the 192.168.0.90(eth1) receives the ping but it doesn't forward it to the eth0 interface as the rule tells: iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT and don't now why this is happening. Questions: The iptables seem that don't work as I am expecting. Is there a need to add in the NAT table from iptables rules to redirect the traffic to the proper location, or is something else wrong with what I've done? I want to use tshark to view the traffic on the server because I think that is the best at doing this. Do you know something better that tshark to capture the traffic and maybe analyze it?

  Read the article

• A Windows Update Prevented Live Discs From Working?

  - by user88311

  First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

  Read the article

• Need a script/batch/program that runs a command that won't be killed when the parent is killed

  - by billc.cn

  The scenario I use Zabbix to monitor my servers and recently I wanted to add some more metrics for the Windows ones. For security reasons, I used Zabbix's User Parameter feature, but it limits the execution of external commands to about 3 seconds. After that, the command is forcibly killed. I want to run some long run commands, so I used the trick from Zabbix's forum: run the command in the background, write the results to a file and use Zabbix to collect them. This is rather easy under *nix thanks to the "&" operator, but there is no such support in Windows' shell. To make things worse, when Zabbix kills forcibly kill the cmd.exe it used to evaluate the commands, all child processes die including the unfinished background tasks. Thus I need something that can sever all the ties with its children so they won't be affected in the cascading kill. What I've tried start and start /B - They do nothing as the child always die with the parent WScript.Shell.Run as in invis.vbs from StackOverflow - Sometimes work. If the wscript process is forcibly killed as opposed to quitting on its own, the children will die as well. hstart - similar results to invis.vbs At command - This requires you to set an absolution time for the task to run as opposed to an offset, so the code would be quite messy due to the limited shell scripting capability of Windows. (Edit) PsExec.exe from the SysInternals suite - It uses a service to launch the command, so it is not affected by the kill; however, it prints some banner and log info to StdErr and there's no switch to disable this. When I use 2>NUL to redirect them, Zabbix reports an error. After trying the above in different combinations, I noticed if I call hstart from invis.vbs, the command started by the former will be left alone as a parent-less process when invis.vbs is killed. However, since I need to redirect the output, the command I want to run is always in the form of cmd.exe /c ""command" "args"" >log. The vbs also removes all the quotes, so I have to encode the command with self-defined escape sequences. The end result involves about five levels of escaping/quoting, which is almost impossible to maintain. Anyone know any better solutions? Some requirements Any bat/vbs/js/Win32 binary is acceptable Better not require multiple levels of escaping No .Net (including PowerShell) because it is not installed

  Read the article

• 2 servers, high availability and faster response

  - by user17886

  I recently bought a second webserver because I worry about hardware failure of my old server. Now that I have that second server I wish to do a little more then just have one server standby and replicate all day. As long as it's there I might as well get some advantage our of it ! I have a website powered by ubuntu 12.04, nginx, php-fpm, apc, mysql (5.5) and couchdb. Im currently testing configurations where i can achieve failover AND make good use of the extra harware for faster responses / distributed load. The setup I am testing nowinvolves heartbeat for ip failover and two identical servers. Of the two servers only one has a public ip adress. If one server crashes the other server takes over the public ip adress. On an incoming request nginx forwards the request tot php-fpm to either server a of server b (50/50 if both servers are alive). Once the request has been send to php-fpm both servers look at localhost for the mysql server. I use master-master mysql replication for this. The file system is synced with lsyncd. This works pretty well but Im reading it's discouraged by the (mysql) community. Another option I could think of is to use one server as a mysql master and one server as a web/php server. The servers would still sync their filesystem, would still run the same duplicate software (nginx,mysql) but master slave mysql replication could be used. As long as bother servers are alive I could just prefer nginx to listen to ip a and mysql to ip b. If one server is down, the other server could take over the task of the other server, simply by ip switching. But im completely new at this so I would greatly value your expert advice. Is either of the two setups any good ? If you have any thoughts on this please let me know ! PS, virtualisation, hosting on different locations or active/passive setups are not solutions im looking for. I find virtual server either too slow or too expensive. I already have a passive failover on another location. But in case of a crash I found the site was still unreachable for too long due to dns caching.

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• Internet Pings but Does Not Load

  - by t3techcom18

  From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

  Read the article

• Configuring Novel iPrint client on ubuntu 13.10

  - by Mahdi Sadeghi

  Recently I have struggled a lot to make Novel iPrint client to work on my laptop. I need it to use Follow Me printers in our university(you can take your print form any printer). Using this tutorial from Novel, I tried to convert the rpm package and install it on Ubuntu 13.04 & 13.10. The post install script from installing generated deb package had a typo which I saw in post install messages and I fixed that. Now I have the client running. To see the client UI I installed cinnamon desktop(because unity does not have system tray and old solutions did'nt work to whitelist Novel clinet). I have iPrint plugin installed on firefox as well(I copied the shared object files to plugin directories). I try installing printers from provided ipp URL(which lists available printers on the server) with no success. After clicking the printer name I see this: I have various errors: Formerly firefox used to asked my network username/password for installing SSL printer but now it returns this: iPrint Printer - The printer is currently not available. However I can install non-SSL version but the printer location is either empty or points to: file:///dev/null even if I change it to the exact address which I see on working machines still it prints nothing. I have tried the novel command line tool, iprntcmd to print. It is being installed at: /opt/novell/iprint/bin/ msadeghi@werkstatt:/opt/novell/iprint/bin$ ./iprntcmd --addprinter ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me\ -\ IPP iprntcmd v05.04.00 Adding printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP. Added printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP successfully. It adds the printer with empty location and again no print. What I found interesting is the log file at ~/.iprint/errors.txt with strange errors which I hope somebody here can understand. When I try to install the SSL printer I receive these logs(note that HP is my local printer and has nothing to do with iprint): Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 676 Group Info: CLIB Error Code: 0 (0x0) User ID: 1000 Error Msg: Success Debug Msg: MyCupsDoFileRequest - httpReconnect failed (0) Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 1293 Group Info: CUPS-IPP Error Code: 1282 (0x502) User ID: 1000 Error Msg: iPrint Printer - The printer is currently not available. Debug Msg: MyCupsDoFileRequest - IPP SERVICE UNAVAILABLE Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified I should say that my friend can print using the same instructions on CrunchBang easily and another guy on 12.04 LTS but with more struggling. It worked for me on linux mint maya with my old laptop as well. Is there anybody out there who can help me to solve these problems? I am really disappointed with Novell and our university support. PS. I had the same problemwith 13.04. No matter if I am within the network or I connect with VPN, I have the same issues.

  Read the article

• Oracle ADF Coverage at OOW

  - by Frank Nimphius

  Below is the schedule for all ADF related sessions at a glance. Note the Meet and greet session added for Wednesday Octiber 3rd from 4.30 pm to 5:30. Oracle ADF and Fusion Development General Session Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM General Session: The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud Marriott Marquis - Salon 8 12:15 PM - 1:15 PM General Session: Extend Oracle Fusion Apps to Tablets/Smartphones with Oracle Mobile Technology Moscone West - 3014 1:45 PM - 2:45 PM General Session: Extend Oracle Applications to Mobile Devices with Oracle’s Mobile Technologies Moscone West - 3002/3004 4:45 PM - 5:45 PM General Session: Building Mobile Applications with Oracle Cloud Moscone West - 2002/2004 Conference Session Mon 1 Oct, 2012 Time Title Location 12:15 PM - 1:15 PM Understanding Oracle ADF and Its Role in Oracle Fusion Moscone South - 306 1:45 PM - 2:45 PM Building Performant Oracle ADF Business Components to Meet Tomorrow’s Needs Marriott Marquis - Golden Gate C3 3:15 PM - 4:15 PM End-to-End Oracle ADF Development in Eclipse Marriott Marquis - Golden Gate C3 4:45 PM - 5:45 PM Classic Mistakes with Oracle Application Development Framework Marriott Marquis - Salon 7 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM One Size Doesn’t Fit All: Oracle ADF Architecture Fundamentals Marriott Marquis - Golden Gate C2 10:15 AM - 11:15 AM Oracle Business Process Management/Oracle ADF Integration Best Practices Marriott Marquis - Golden Gate C3 11:45 AM - 12:45 PM Mobile-Enable Oracle Fusion Middleware and Enterprise Applications with Oracle ADF Moscone South - 306 11:45 AM - 12:45 PM Secrets of Successful Projects with Oracle Application Development Framework Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Develop On-Device iPhone and iPad Apps Without Writing Any Objective-C Code Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM BPM, SOA, and Oracle ADF Combined: Patterns Learned from Oracle Fusion Applications Moscone West - 3003 1:15 PM - 2:15 PM The Future of Forms Is … Oracle Forms (and Friends) Moscone South - 306 5:00 PM - 6:00 PM Best Practices for Integrating SOAP and REST Service into Oracle ADF Marriott Marquis - Golden Gate C2 Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA Suite Moscone West - 3001 10:15 AM - 11:15 AM Visualize This! Best Practices for Data Visualization in Desktop and Mobile Apps Marriott Marquis - Golden Gate C3 10:15 AM - 11:15 AM Set Up Your Oracle ADF Project and Development Team for Productivity: Seven Essential Tips Marriott Marquis - Golden Gate C2 11:45 AM - 12:45 PM How to Migrate an Oracle Forms Application to Oracle ADF Marriott Marquis - Golden Gate C2 1:15 PM - 2:15 PM Oracle ADF: Lessons Learned in Real-World Implementations Moscone South - 309 3:30 PM - 4:30 PM Oracle ADF Implementations Around the Globe: Best Practices Marriott Marquis - Golden Gate C2 3:30 PM - 4:30 PM Oracle Developer Cloud Services Marriott Marquis - Salon 7 4:30 PM - 5:30 PM Oracle JDeveloper and Oracle ADF: What’s New Hilton San Francisco - Continental Ballroom 5 5:00 PM - 6:00 PM Mobile Solutions for Oracle E-Business Suite Applications: Technical Insight Moscone West - 2020 5:00 PM - 6:00 PM Extending Social into Enterprise Applications and Business Processes Marriott Marquis - Golden Gate C3 5:00 PM - 6:00 PM The Tie That Binds: An Introduction to Oracle ADF Bindings Marriott Marquis - Golden Gate C2 Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Using Oracle ADF with Oracle E-Business Suite: The Full Integration View Moscone West - 3003 11:15 AM - 12:15 PM Deep Dive into Oracle ADF: Advanced Techniques Marriott Marquis - Golden Gate C2 12:45 PM - 1:45 PM Monitor, Analyze, and Troubleshoot Your Oracle ADF Application Marriott Marquis - Golden Gate C2 2:15 PM - 3:15 PM Oracle WebCenter Portal: Creating and Using Content Presenter Templates Marriott Marquis - Golden Gate C2 HOL (Hands-on Lab) Mon 1 Oct, 2012 Time Title Location 10:45 AM - 11:45 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:45 PM - 2:45 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 3:15 PM - 4:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 4:45 PM - 5:45 PM Application Lifecycle Management with Oracle JDeveloper: Hands-on Lab Marriott Marquis - Salon 3/4 Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Wed 3 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 11:45 AM - 12:45 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 1:15 PM - 2:15 PM Build Mobile Applications for Oracle E-Business Suite Marriott Marquis - Salon 10A 3:30 PM - 4:30 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 5:00 PM - 6:00 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A Thur 4 Oct, 2012 Time Title Location 11:15 AM - 12:15 PM Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile: Hands-on Lab Marriott Marquis - Salon 10A 11:15 AM - 12:15 PM Introduction to Oracle ADF: Hands-on Lab Marriott Marquis - Salon 3/4 12:45 PM - 1:45 PM Oracle ADF for Java EE Developers with Oracle Enterprise Pack for Eclipse Marriott Marquis - Salon 3/4 BOF (Birds-of-a-Feather) Mon 1 Oct, 2012 Time Title Location 6:15 PM - 7:00 PM How to Get Started with Oracle ADF Marriott Marquis - Club Room 7:15 PM - 8:00 PM Building Next-Generation Applications with Oracle ADF and Oracle BPM Marriott Marquis - Golden Gate C3 7:15 PM - 8:00 PM The Future of Oracle Forms: Upgrade, Modernize, or Migrate? Marriott Marquis - Golden Gate C2 7:15 PM - 8:00 PM Oracle ADF Faces: One Site for Many Devices Marriott Marquis - Golden Gate C1 - User Group Forum (Sunday Only) Sun 30 Sept, 2012 Time Title Location 9:00 AM - 10:00 AM Oracle ADF Immersion: How an Oracle Forms Developer Immersed Himself in the Oracle ADF World Moscone South - 305 10:15 AM - 11:15 AM Deploy with Joy: Using Hudson to Build and Deploy Your Oracle ADF Applications Moscone South - 305 11:30 AM - 12:30 PM ADF EMG User Group: A Peek into the Oracle ADF Architecture of Oracle Fusion Applications Moscone South - 305 12:45 PM - 3:45 PM ADF EMG User Group: Oracle Fusion Middleware Live Application Development Demo Moscone South - 305 3:15 PM - 4:15 PM Mobile Development with Oracle JDeveloper and Oracle ADF Moscone West - 2010 Demos Demo Location Developer Moscone North, Upper Lobby - N-002 Oracle ADF Mobile Development Moscone North, Upper Lobby - N-001 Oracle Eclipse Projects Hilton San Francisco, Grand Ballroom - HHJ-008 Oracle Enterprise Pack for Eclipse Moscone South, Right - S-208 Oracle JDeveloper and Oracle ADF Moscone South, Right - S-207 Exhibits 0 Exhibitor Location Accenture Moscone South - 1813 Moscone South - 2221 Infosys Moscone South - 1701 Moscone South - SMR-005 Innowave Technology Moscone South - 2309 ODTUG Moscone West, Level 2 Lobby - Kiosk in the User Groups Pavilion Oracle ADF Developers Meet Up Wednesday, Oct 03 Time Activity Location 4:30 PM - 5:30 PM Stop by the OTN Lounge and meet other Oracle ADF & Fusion developers as well as product managers and engineers who work on Oracle ADF, ADF Mobile and ADF Essentials. Feedback and questions welcome, or simply stop by and say ‘hi!’ and enjoy free beer. OTN Lounge

  Read the article

• March 21st Links: ASP.NET, ASP.NET MVC, AJAX, Visual Studio, Silverlight

  - by ScottGu

  Here is the latest in my link-listing series. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.  [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET URL Routing in ASP.NET 4: Scott Mitchell has a nice article that talks about the new URL routing features coming to Web Forms applications with ASP.NET 4.  Also check out my previous blog post on this topic. Control of Web Control ClientID Values in ASP.NET 4: Scott Mitchell has a nice article that describes how it is now easy to control the client “id” value emitted by server controls with ASP.NET 4. Web Deployment Made Awesome: Very nice MIX10 talk by Scott Hanselman on the new web deployment features coming with VS 2010, MSDeploy, and .NET 4.  Makes deploying web applications much, much easier. ASP.NET 4’s Browser Capabilities Support: Nice blog post by Stephen Walther that talks about the new browser definition capabilities support coming with ASP.NET 4. Integrating Twitter into an ASP.NET Website: Nice article by Scott Mitchell that demonstrates how to call and integrate Twitter from within your ASP.NET applications. Improving CSS with .LESS: Nice article by Scott Mitchell that describes how to optimize CSS using .LESS – a free, open source library. ASP.NET MVC Upgrading ASP.NET MVC 1 applications to ASP.NET MVC 2: Eilon Lipton from the ASP.NET team has a nice post that describes how to easily upgrade your ASP.NET MVC 1 applications to ASP.NET MVC 2.  He has an automated tool that makes this easy. Note that automated MVC upgrade support is also built-into VS 2010.  Use the tool in this blog post for updating existing MVC projects using VS 2008. Advanced ASP.NET MVC 2: Nice video talk by Brad Wilson of the ASP.NET MVC team.  In it he describes some of the more advanced features in ASP.NET MVC 2 and how to maximize your productivity with them. Dynamic Select Lists with ASP.NET MVC and jQuery: Michael Ceranski has a nice blog post that describes how to dynamically populate dropdownlists on the client using AJAX. AJAX Microsoft AJAX Minifier: We recently shipped an updated minifier utility that allows you to shrink/minify both JavaScript and CSS files – which can improve the performance of your web applications.  You can run this either manually as a command-line tool or now automatically integrate it using a Visual Studio build task.  You can download it for free here. Visual Studio VS 2010 Tip: Quickly Closing Documents: Nice blog post that describes some techniques for optimizing how windows are closed with the new VS 2010 IDE. Collpase to Definitions with Outlining: Nice tip from Zain on how to collapse your code editor to outline mode using Ctrl + M, Ctrl + O.  Also check out his post on copy/paste with outlining here. $299 VS 2010 Upgrade Offer for VS 2005/2008 Standard Users: Soma blogs about a nice VS 2010 upgrade offer you can take advantage of if you have VS 2005 or VS 2008 Standard editions.  For $299 you can upgrade to VS 2010 Professional edition. Dependency Graphics: Jason Zander (who runs the VS team) has a nice blog post that covers the new dependency graph support within VS 2010.  This makes it easier to visualize the dependencies within your application.  Also check out this video here. Layer Validation: Jason Zander has a nice blog post that talks about the new layer validation features in VS 2010.  This enables you to enforce cleaner layering within your projects and solutions.  VS 2010 Profiler Blog: The VS 2010 Profiler Team has their own blog and on it you can find a bunch of nice posts from the last few months that talk about a lot of the new features coming with VS 2010’s Profiler support.  Some really nice features coming. Silverlight Silverlight 4 Training Course: Nice free set of training courses from Microsoft that can help bring you up to speed on all of the new Silverlight 4 features and how to build applications with them.  Updated and current with the recently released Silverlight 4 RC build and tools. Getting Started with Silverlight and Windows Phone 7 Development: Nice blog post by Tim Heuer that summarizes how to get started building Windows Phone 7 applications using Silverlight.  Also check out my blog post from last week on how to build a Windows Phone 7 Twitter application using Silverlight. A Guide to What Has Changed with the Silverlight 4 RC: Nice summary post by Tim Heuer that describes all of the things that have changed between the Silverlight 4 Beta and the Silverlight 4 RC. Path Based Layout - Part 1 and Part 2: Christian Schormann has a nice blog post about a really cool new feature in Expression Blend 4 and Silverlight 4 called Path Layout. Also check out Andy Beaulieu’s blog post on this. Hope this helps, Scott

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >