Search Results

Search found 8706 results on 349 pages for 'dual monitor'.

Page 284/349 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

• Terminal Server CPU usage at 100%

  - by Light1c3

  I'm running a terminal server with around 50-60 users,and every so often the server will go from 40% usage to 100%. I took a closer look an it seems every time this happens, a different user or two seem to be caught in a loop and end up using < 30% where the rest of the users only use a maximum of 5%. The company behind the software we use clame it's due to the servers inadequate hardware (It's a VM system running on a dual - quad core setup) which to me sounds like BS! I'm fairly new to this level of IT so if I misspoke I apologize. I have no way to prove it but I believe adding more raw hardware power wont do me any good as this to me seems like a bug in their software, and it will suck up as much ( or little) CPU as it's given. The VM in question has 4 vCPU cores and 12 GB RAM available, and is running Windows Server 2008, 64-bit Thanks in advance for your help! Note: I have the same question posted on SO, but was pointed in this direction so just in case, here is a link to the post http://stackoverflow.com/questions/17276602/termserver-cpu-at-100

  Read the article

• Tuning Linux + HAProxy

  - by react

  I'm currently rolling out HAProxy on Centos 6 which will send requests to some Apache HTTPD servers and I'm having issues with performance. I've spent the last couple of days googling and still can't seem to get past 10k/sec connections consistently when benchmarking (sometimes I do get 30k/sec though). I've pinned the IRQ's of the TX/RX queues for both the internal and external NICS to separate CPU cores and made sure HAProxy is pinned to it's own core. I've also made the following adjustments to sysctl.conf: # Max open file descriptors fs.file-max = 331287 # TCP Tuning net.ipv4.tcp_tw_reuse = 1 net.ipv4.ip_local_port_range = 1024 65023 net.ipv4.tcp_max_syn_backlog = 10240 net.ipv4.tcp_max_tw_buckets = 400000 net.ipv4.tcp_max_orphans = 60000 net.ipv4.tcp_synack_retries = 3 net.core.somaxconn = 40000 net.ipv4.tcp_rmem = 4096 8192 16384 net.ipv4.tcp_wmem = 4096 8192 16384 net.ipv4.tcp_mem = 65536 98304 131072 net.core.netdev_max_backlog = 40000 net.ipv4.tcp_tw_reuse = 1 If I use AB to hit the a webserver directly I easily get 30k/s connections. If I stop the webservers and use AB to hit HAProxy then I get 30k/s connections but obviously it's useless. I've also disabled iptables for now since I read that nf_conntrack can slow everything down, no change. I've also disabled the irqbalance service. The fact that I can hit each individual device with 30k/s makes me believe the tuning of the servers is OK and that it must be some HAProxy config? Here's the config which I've built from reading tuning articles, etc http://pastebin.com/zsCyAtgU The server is a dual Xeon CPU E5-2620 (6 cores) with 32GB of RAM. Running Centos 6.2 x64. The private and public interfaces are on separate NICS. Anyone have any ideas? Thanks.

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Windows Displays Double the Actual Installed Physical Memory

  - by Andrew Barber

  I have a server I've installed Windows Web 2008 R2 on, which is reporting that I have double the physical memory installed as is actually the case. In msinfo32 "Installed Physical Memory" shows as 2x what ever the actual installed amount is, though "Total Physical Memory" shows the correct amount. The "System" info window shows installed memory as 2x, with the correct amount in parenthesis listed as the "usable" amount). This server mistakenly had Windows Web 2008 (32-bit) installed on it just previously, and that OS also reported the same faulty information as Win2K8R2 is reporting. BIOS reports the correct amount, memtest was run on this server before installation, and a previous Windows 2000 instance installed on this system also reported the correct amount, as I recall. Server operation seems to be fine as well (it's only trying to use the correct amount of memory). The server is a generic pizzabox running on a SuperMicro X6DVL-EG with dual Xeon-3.2's. Memory installed are 4 matching mt18vddf12872g-335c3 sticks (1GB pc2700 DDR ECC REG cl2.5) This behavior occurs whether two or all four are installed. So, has anyone seen something like this before? Have any idea about what's causing it, and how I should be concerned about it? Everything else seems good so far, and I'll be upgrading the memory before putting the server into service, but I don't want to spend too much time/money/effort on the server if it's got something odd going wrong here. UPDATE: There was a question I ran into regarding memory sparing in the BIOS and a possible (buggy) effect thereof; however, flipping that bit back and forth in the BIOS revealed that isn't the issue. Still flummoxed a bit about this one, though I still have seen no negative impacts. Post-Answer Update (January 13, 2011): Upgrading the system with new, larger memory has fixed this issue.

  Read the article

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  Hello, I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• How to change the MAC address in Win 8 to spoof a Roku Player through a WiFi splash page?

  - by luser droog

  My Linux laptop died yesterday and now I can't watch TV. Let me explain. I use a Roku Player to stream Netflix shows to my television; and a year or two ago, the Internet Service provided in my apartment complex added a Splash Page to get through the router and onto the net. After not too many days, I remembered that internet devices identify themselves with a MAC address. So I delved into the manpage of ifconfig and discovered that I could persuade my laptop to pretend to be the Roku Player, connect, click through the Splash Page, disconnect and change it back. This would allow the Roku to connect for about 24 hours, when I would have to do it again. But the laptop died yesterday during my smoke break. So during lunch, I ran to OfficeMax and got a new one. But I don't know where to begin looking for where to change the MAC address (assuming it's possible). I know I can try dual-boot, or a keychain OS, or possibly other things to resurrect my old method. But, is it possible to get Windows do it?

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• trying to setup multiple primary partitions on ubuntu linux [migrated]

  - by JohnMerlino

  I currently have ubuntu desktop installed on a harddrive. I want to partition the harddrive so that I can reserve 30 gigs for ubuntu server and 30 gigs for ubuntu desktop. The drive has 300 gigs available. Right now I am booting from dvd drive and installing ubuntu server. I selected "Guided partitioning" and created a 30 gig primary partition of Ext4 journaling filesystem, set "yes, format it" for format partition and set bootable flag to on. I intend to use this 30 gig partition to hold ubuntu server and allow me to boot from it. Now I have two other partitions. They are both set to "logical", one is currently using 285.8 gigs and is using ext4 (when I try to set bootable flag to true, it gives a warning "You are trying to set the bootable flag on a logical partition. The bootable flag is only useful on the primary partitions"). More alarming it says "No existing file system was detected in this partition". Actually, Im thinking that this is the parittion that is supposed to be holding my current Ubuntu Desktop. And of course I want this to be bootable and be a primary partition, so I could dual boot from this and the server partition. Now the third partition is also set to logical and it is being used as swap area. My question is regarding that second partition. Its supposed to be a primary partition thats holding my existing ubuntu desktop edition. How do I switch it to primary and to make sure that its pointing to my existing desktop installation?

  Read the article

• Are these hardwares compatible?

  - by Tom Kaufmann

  I am trying to upgrade my new machine but I want to do it myself. This is my 1st attempt at building system. After carefully reading reviewing feedback and my budget I have decided to select the below listed components. Can anybody let me know are they compatible or not? Transcend 64 GB 2.5" SATA Solid State Drive Asus GeForce GTX550 1GB DDR5 ENGTX550 TI DI/1GD5 Graphics Card Seagate Barracuda 1 TB HDD Internal Hard Drive Cooler Master eXtreme Power Pro 600 Power Supply Intel Core i5 2500K Sandy Bridge 3.30 GHz 95 W 4 Core Desktop Processor Intel DX79TO Motherboard Corsair CMZ8GX3M2A1600C9 8 GB DDR3 SDRAM 1600 MHz Dual Channel Kit Desktop Memory Sony AD-7260S-ZS Internal DVD Writer - Black Cooler Master Hyper TX3 EVO Intel CPU Cooler Cooler Master Elite 335U Cabinet LG E2051T 20.1 Inch SuperSlim Monitor Is any of these hardware components incompatible with I5 2500K? If you have any other suggestions for selecting any other harwdware that can boost up my performance or lower my cost while having the same performance, please suggest. But my primary questions is whether they are compatible or not! Any help is appreciated. Thank you.

  Read the article

• Laptop keyboard stopped functioning properly

  - by galdikas

  Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

  Read the article

• Eee PC 1015BX ram compatibility?

  - by AdrianaMX

  Asus Eee PC 1015BX Operating System Windows 7 Starter, 32bit CPU AMD Fusion APU C60 1.0GHz (dual core) Processor Graphic AMD Radeon HD 6290 (256 MB Shared) Memory DDR3, 1 x SO-DIMM, 1GB I have upgraded the preloaded "Windows 7 Starter" to "Windows 7 Professional" I want to upgrade the ram, from 1gb (factory) to 4 gb. What should i buy? SODDR3, 4GB, 1066MHZ, PC3-8500, 204PIN? or SODDR3, 4GB, 1333MHZ, PC3-10666, 204PIN? I already know that Windows 7 32-bits can't handle 4gb, only 3gb (but 3gb is better than one stick of 2gb). ASUS send me this link, but i think they are wrong, (or Insufficient Information for me) http://www.kingston.com/us/memory/search/Default.aspx?DeviceType=3&Mfr=ASU&Line=Eee%20PC&Model=71404 Thank you. CPU-Z Chipset Memory Type DDR3 Memory Size 750 MBytes Memory Frequency 532.2 MHz (3:16) CAS# latency (CL) 7.0 RAS# to CAS# delay (tRCD) 7 RAS# Precharge (tRP) 7 Cycle Time (tRAS) 20 Bank Cycle Time (tRC) 27 Memory SPD NO INFO AIDA64 North bridge Properties North bridge AMD K14 IMC Supported Memory Types DDR3-800, DDR3-1066 SDRAM Memory Slots DRAM Slot #1 1 GB (DDR3 SDRAM) Integrated Graphics Controller Graphics Controller Type AMD Radeon HD 6290 (Wrestler) Graphics Controller Status Enabled Graphics Frame Buffer Size 256 MB

  Read the article

• Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

  - by xhyperx

  The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

  Read the article

• What method of MySQL mirroring should I use for this?

  - by user45745

  I'm running an web application hosting service (basically hosting forums for free), and I have two remote servers at my disposal. The code for the application is stored on both servers and isn't a problem, but I'm wondering how to deal with the databases. When someone goes onto a site *.example-host.com, they are sent to one of the two servers and both must be capable of loading the forums from a database. The database must also have write access, for when new members register or post topics etc. The main requirement is speed, but uptime is also important (if a server goes out, the site should still work). I have a few options, but I'm inexperienced and not sure which to go with: 1) [PHP] Split the forum records 50:50 between the two servers. If a server does not have the record for a forum requested, it can request it from the other by remote MySQL and load it. This idea sounded okay, until I realised that 50% of the time, users would be waiting significantly longer for pages to load. I also realised that if one of the servers went down, half the forums would be inaccessible and registrations would have to be disabled. 2) [MySQL] Dual master replication. This would attempt to mirror the two databases and sounds perfect, but I've heard that it can be very problematic. I don't know how fast this is. 3) [MySQL] Use a standard replication, distribute read only queries on both nodes and read/write queries to the master. This sounds like a good option, but again, I'm not sure on speed. I also don't know what would happen if the master server went down. If you have any other suggestions, please post them :)

  Read the article

• I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

  - by anonymous

  Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

  Read the article

• Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

  - by xhyperx

  The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

  Read the article

• Windows 7: moved system partition, need to update boot partition

  - by Actorclavilis

  So, I have a decently standard Windows7/Ubuntu dual-boot setup, and (since Ubuntu is my usual operating system) I found I needed to grow my Ubuntu partition and shrink my W7 partition. Originally, my system (500G) looked like this: W7 Boot Partition (1.5G) Ubuntu (around 240G) W7 (same as Ubuntu) (on an extended partition, all by itself) Swap (rest of disk, around 16G) Now I'm no stranger to partitioning and filesystem tools, especially GParted, which I used on a Linux boot disk. After my partition editing, the partitions are laid out the same, except the Ubuntu partition is now 407G and the W7 partition is smaller to compensate. I had supposed, based on http://www.gparted.org/faq.php, that I would be able to run the W7 install disk in recovery mode and have it deal with the rearrangement, then possibly reinstall GRUB or something. Well, now the W7 install disk doesn't even see my W7 installation. All my files are there, the NTFS is perfectly clean, no problems there, but the install disk won't notice it. (Of course, the GRUB entry works fine but the W7 boot partition (which I didn't change) refuses to boot it.) So, basically, any ideas on how to fix this? I don't especially want to rerun the entire install procedure because I'll have a bunch of programs to reinstall (never mind redoing GRUB), but I fear that might be the only option. Thanks.

  Read the article

• SQL Server: Network pauses after installing cheap SATA card: Is there a solution?

  - by samsmith

  At the risk of being assigned to the "bad DBA" club... I did something desperate, and may have to undo it. Problem: After installing a low cost eSATA board, my SQL Server is intermittently unresponsive (seemingly when there is a lot of IO to the eSATA drive). Questions: 1) Is there a solution to the intermittent unresponsiveness that allows me to keep the eSATA in place? 2) Whether or not (1==true): What is a decent, low cost way to add 1-3 TB storage to SQL for non-critical SQL DBs? Detail: Our SAN is full, and expanding it is costly and will take a month. I have a pressing need to add 1-3 TB for some development DBs (e.g. not mission critical; data loss is OK). As a bandaid, I threw a $20 eSATA PCI board in the Dell 1950 server, and attached an external 2TB eSATA drive. This seemed to work fine, but I notice that our production SQL DBs, and even remote desktop, now experience network "pauses" that they never did before (with both SQL client apps and remote desktop throwing "networking problem" errors). This SQL Server has lots of memory, and runs an instance of SQL 2005 (where all line of business apps reside) and an instance SQL 2008 (for development db's). SQL Server RAM has been appropriately configured, and this setup has run great for years. The server is: Dell 1950 Win2003 x64 14GB RAM PERC controller, 2 mirrored hd's internal Dell SAN over gbit ethernet, dual homed 2 PCIx slots (1 used by NIC for SAN, 1 now in use for eSATA board) Thank you for suggestions!

  Read the article

• How can I undo what I did when I accidentally booted linux host inside itself with VMware?

  - by ThomasGHenry

  Hello, I'm dual booting XP and Kubuntu. I wanted to boot to my existing raw scsi XP partition inside Kubuntu, not a virtual XP instance. I accidentally booted Kubuntu inside itself. I know this is a big mistake, so I interrupted the VM, which saved the state and closed. I rebooted the host and now I can't load the Kubuntu partition at boot time. I get a maintenance shell and the Kubuntu partition is read-only. I am able to boot XP as usual. I removed the HDD and tried to mount it on another computer as an external drive and neither partition (XP or Kubuntu) will be recognized, it just appears to be one device that still mounts and appears empty. From the maintenance shell I can see all the files are still on the Kubuntu partition. How can I undo what I did when I accidentally booted Kubuntu inside itself? Is it a matter of unlocking some files somewhere? how can I do that on a RO filesystem? Thanks!

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look? Edit: SQL Server Version is 9.0.4035

  Read the article

• Debian boot problems

  - by psp

  I've got Debian server with one disk. No dual boot or anything fancy. Just Debian 6.0 (Squeeze). I rebooted the server today and now it doesn't boot. I get the following (from GRUB): error: hd0,msdos out of disk I then get a grub prompt grub rescue> I've been googling for ages with no luck. /etc/fstab > #/etc/fstab: static file system information. > # > # <file system> <mount point> <type> <options> <dump> <pass> > aufs / aufs rw 0 0 > tmpfs /tmp tmpfs nosuid,nodev 0 0 I've run debian rescue mode and looked through the syslog. I see hundreds of entries like this: Jun 30 22:51:08 kernel: [ 615.217382] sd 2:0:0:0: [sda] Unhandled error code Jun 30 22:51:08 kernel: [ 615.217385] sd 2:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Jun 30 22:51:08 kernel: [ 615.217389] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 30 22:51:08 kernel: [ 615.217399] end_request: I/O error, dev sda, logical block 0 Jun 30 22:51:08 kernel: [ 615.217402] Buffer I/O error on device sda, logical block 0

  Read the article

• System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

  - by Tor Thommesen

  I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

  Read the article

• Allow more websocket connections

  - by Switz

  I want to load balance my node.js (DerbyJS to be specific) application on a basic Linode (512MB ram). It can probably take more than one process running at once. The querys/database does not concern me as I'm not doing anything intensive. The problem at the moment is that it can only handle up to ~40 websocket connections at once. I would love if I could get that number in the few hundred+ range. I anticipate a lot of traffic on launch due to the fact that it's a highly niche community with an engaged audience, but after it should be fine with just ~20-40 connections at once, which it handles perfectly as of now. I don't mind spending a bit of money for a week or two worth of running, but I also don't want to switch production environments. How can I test the process to see how many instances I am able to run on the box? Will increasing the number of processes increase the amount of websockets I can handle, or is that a limitation of the server's network? I have an old Macbook Pro running Linux sitting next to me that has 2GB ram and a 2.8 Dual Core Processor. Could I use this to handle some of the extra load? I could probably load balance with nginx to its IP. I'm on a FiOS home network. If you have any suggestions, I'd really appreciate it. Thanks

  Read the article

• Perfmon % Processor Time vs. task manager's CPU usage

  - by nat

  I'm new to using Perfmon and performance monitoring in general (so go easy on me please ;) I know that Perfmon doesn't have anything exactly like Task Manager's CPU usage display, but I'm trying to figure out how to monitor user's CPU usage via Perfmon in a similar way, and trying to understand the measurements (or how to convert the numbers to get a similar understanding) For example, if in Task Manager, a particular user is consistently using more than 5% CPU, I would want to contact the user about it. I learn best by example, so here is exactly what I'm trying to do, with a specific example: This is for a 32-bit Dual Quad Core Windows 2003 web server (8 CPUs), there are many web sites on the server, each running within their own application pool/worker process ID. Through other research here I learned of a registry change that I made so that the PID shows up with the w3wp process so I can easily identify the site later by cross-referencing it. I set up a counter with the following settings: Process -> % Processor Time -> all instances Here is an example. Say I'm interested in "black line" user in this graph below, as his process is spiking quite high compared to all the other users: (I wasn't allowed to post the image as I'm a new user on this site.. I've uploaded the image to:) http://i35.tinypic.com/106yn8k.jpg So... using this as an example, I see that they have an AVERAGE % PROCESSOR TIME of 23.264 , and have spiked as high as 103.124 So what exactly does this 23.264 number mean to me? Is it similar to an average of Task Manager's CPU reading for this user? Or, since this server has 8 CPUs, should I divide this number by 8? (23.264/8 = 2.9% AVERAGE CPU LOAD?) Thanks in advance.

  Read the article

• dtexec with password

  - by user1602996

  I have added a new step in my job activity monitor which runs ssis package(encrepted with password). dtexec /f "\\sw-conf-dev-01\projects\dtsx\Email.dtsx" /de "ssispassword" error message: Description: The package is encrypted with a password. The password was not specified, or is not correct. End Error Could not load package "\sw-conf-dev-01\projects\dtsx\Email.dtsx" because of error 0xC0014037. Description: Failed to remove package protection with error 0xC0014037 "The package is encrypted with a password. The password was not specified, or is not correct.". This occurs in the CPackage::LoadFromXML method I have used the same password in the package as well, but i don't know why I'm still getting an error message. Any ideas?

  Read the article

• android memory management outside heap

  - by Daniel Benedykt

  Hi I am working on an application for android and we since we have lots of graphics, we use a lot of memory. I monitor the memory heap size and its about 3-4 Mb , and peeks of 5Mb when I do something that requires more memory (and then goes back to 3). This is not a big deal, but some other stuff is handled outside the heap memory, like loading of drawables. For example if I run the ddms tool outside eclipse, and go to sysinfo, I see that my app is taking 20Mb on the Droid and 12 on the G1, but heap size are the same in both, because data is the same but images are different. So the questions are: How do I know what is taking the memory outside the heap memory? What other stuff takes memory outside the heap memory? Complex layouts (big tree) ? Animations? Thanks Daniel

  Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >