Search Results

Search found 9017 results on 361 pages for 'efficient storage'.

Page 284/361 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >

• Linux machine can't find its tape drive

  - by Kyle Hodgson

  I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

  Read the article

• How to make 7-Zip faster

  - by Matt

  I normally use WinRAR over 7-Zip simply because it's faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7-Zip and WinRAR default settings on their normal compression and their best compression, and in a lot of cases WinRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7-Zip speed up? I'd like it to at least be on par with WinRAR's speed Is there a way to make recovery segments in 7-Zip like you can in WinRAR? I didn't see any, but I guess it could be a command line thing. I tested WinRAR and 7-Zip using the latest stable version of each (4-dot-something with 7-Zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core Intel i7 720 (1.6 GHz)/(2.8 GHz) with 4 GB DDR3 RAM, and the 64-bit version of 7-Zip, and dual-boot Debian x64 5.0.4 and Windows 7 Home.

  Read the article

• Apache doesn't immediately notice a change in the document root

  - by Tom

  We use capistrano for website deployments and our Apache document root is a symlink to a particular code release. The deployment procedure switches the symlink from the old release to the new release as the final step of the deployment. We are migrating our webservers from real servers running RHEL 5.6 to Amazon EC2 virtual machines running Ubuntu 11.10 and the new servers are suffering from a problem where Apache doesn't immediately notice the change to it's document root when the symlink is switched. It can take a second or so (and I think I've even seen it take a couple of minutes). It's kind of like Apache has cached the physical path of the symlink for some time. Does anyone know some Apache settings I could look at to get it to "scan" for changes to it's served files quicker. Thoughts: I read that the disks on virtual machines are much slower (since they are network attached storage). Perhaps the filesystem cache somehow works differently too? If so, is there anything that can be done? The website runs PHP code. Perhaps there is some PHP config differences between RHEL and Ubuntu? I checked realpath_cache_ttl but both servers have it commented out: e.g. ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://www.php.net/manual/en/ini.core.php#ini.realpath-cache-ttl ;realpath_cache_ttl = 120 We do use the APC opcode cache but don't think it's the issue due to experimentation. The PHP code is in different file paths for each deployment and we ensure stat=1. Here is a similar question that is very interesting: 294107 - but doesn't provide an answer for me. One solution would be to reload Apache everytime we modify the document root symlink. I'll do this if we can't find another solution.

  Read the article

• What can lead to a zone memory exhaustion and how Nginx reacts to it?

  - by Miles Hughes

  What is a possible scenario for exhausting the memory designated to a connection zone with limit_conn_zone directive and what are the implication in this case? Suppose I have this in my configuration: http { limit_conn_zone $binary_remote_addr zone=connzone:1m; ... server { limit_conn connzone 5; which, according to the documentation, allocates 16000 states for connzone on a 64-bit server. It also says that If the storage for a zone is exhausted, the server will return error 503 (Service Temporarily Unavailable) to all further requests. Well, Ok. But what does it mean on practice? When does this happen? Who receives those 503s? Does it mean that if the number of IPs somehow associated with connzone hits 16000 everyone gets a 503 and it's all over? How does Nginx decide? The documentation is weirdly vague on this. So, considering the example config, who would actually get a 503 and under which circumstances and how would things go from there? Same with request zones?

  Read the article

• Magento Apache Config & Memory Issues

  - by cheshirepine

  I have a Magento installation on a VPS that is giving me a headache. This particular VPS has a reasonable spec - 2gb Memory and 50gb storage. It runs a single domain, with a single Magento install - and nothing else. About 5 months ago we started having issues. Every so often (about once every 2 or 3 weeks) the VPS would crash - all processes stopped and the only way to restart the container is via Virtuozzo. Now, however its 2 or 3 times a week. My VPS hosts confirm I am breaching the 2gb memory limit, at which point all VPS processes are killed to stop it bringing the entire node down. I have not made any config changes to it at all - I was running New Relic on it for a short while, but have removed that in case it was contributing to the issues. I can see nothing in the logs which indicates an issue and we have no CRON jobs running at the time the crashes happen. The site generates steady, but not huge amounts of traffic (averaging usually less than 100 visits per day) Is there anything in particular I should have done to the Apache or PHP configs to help? Im not a massivley experienced Apache admin, but know more than enough to solve most problems... Failing that, any other ideas that might help? Can't afford for this site to be down this much.

  Read the article

• Unable to authenticate to Windows Server 2003 for file browsing as non-administrator user.

  - by Fopedush

  I've got a windows server 2003 box containing a raid 5 array I use for mass storage. I want to set up a special non-administrator account that can be used to browse files over the network, with only read access. Ideally I'll map my network drive as this user to avoid accidentally hosing my data, and mount as an administrator user on occasions where I actually need write access. I've created a non-administrator user on the Windows Server box (called "ReadOnly)", and granted the user read permissions on the folders I need. However, when I try to browse to the files, and authenticate as this user, I'm told "Permission denied". If I throw the readOnly user into the administrators group, however, I can authenticate and browse just fine. I am, of course, only attempting to browse to folder for which I have given this user read permissions. Obviously my ReadOnly user is missing some privilege here, but I can't figure out what it is. I've been digging around in group policy editor all day to no avail. What am I missing? Fake Edit: I'm doing my browsing from a Windows 7 box, but I don't think that is relevant.

  Read the article

• How to test email spam scores with amavis?

  - by CaptSaltyJack

  I'd like a way to test a spam message to see its spam scores that SpamAssassin gives it. The SA db files (bayes_toks, etc) reside in /var/lib/amavis/.spamassassin. I've been testing emails by doing this: sudo su amavis -c 'spamassassin -t msgfile' Though this yields some strange results, such as: Content analysis details: (3.7 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 3.5 BAYES_99 BODY: Bayes spam probability is 99 to 100% [score: 1.0000] -0.0 NO_RELAYS Informational: message was not relayed via SMTP 0.0 LONG_TERM_PRICE BODY: LONG_TERM_PRICE 0.2 BAYES_999 BODY: Bayes spam probability is 99.9 to 100% [score: 1.0000] -0.0 NO_RECEIVED Informational: message has no Received headers 0.2 is an awfully low scores for BAYES_999! But this is the first time I've used amavis, previously I've always just used spamassassin directly as a content filter in postfix, but apparently running amavis/spamassassin is more efficient. So, with amavis in the picture, how can I run a test on a message to see its spam score breakdown? Another email I ran a test on got this result: 2.0 BAYES_80 BODY: Bayes spam probability is 80 to 95% [score: 0.8487] Doesn't make sense, that BAYES_80 can yield a higher score than BAYES_999. Help!

  Read the article

• snort analysis of wireshark capture

  - by Ben Voigt

  I'm trying to identify trouble users on our network. ntop identifies high traffic and high connection users, but malware doesn't always need high bandwidth to really mess things up. So I am trying to do offline analysis with snort (don't want to burden the router with inline analysis of 20 Mbps traffic). Apparently snort provides a -r option for this purpose, but I can't get the analysis to run. The analysis system is gentoo, amd64, in case that makes any difference. I've already used oinkmaster to download the latest IDS signatures. But when I try to run snort, I keep getting the following error: % snort -V ,,_ -*> Snort! <*- o" )~ Version 2.9.0.3 IPv6 GRE (Build 98) x86_64-linux '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 1998-2010 Sourcefire, Inc., et al. Using libpcap version 1.1.1 Using PCRE version: 8.11 2010-12-10 Using ZLIB version: 1.2.5 %> snort -v -r jan21-for-snort.cap -c /etc/snort/snort.conf -l ~/snortlog/ (snip) 273 out of 1024 flowbits in use. [ Port Based Pattern Matching Memory ] +- [ Aho-Corasick Summary ] ------------------------------------- | Storage Format : Full-Q | Finite Automaton : DFA | Alphabet Size : 256 Chars | Sizeof State : Variable (1,2,4 bytes) | Instances : 314 | 1 byte states : 304 | 2 byte states : 10 | 4 byte states : 0 | Characters : 69371 | States : 58631 | Transitions : 3471623 | State Density : 23.1% | Patterns : 3020 | Match States : 2934 | Memory (MB) : 29.66 | Patterns : 0.36 | Match Lists : 0.77 | DFA | 1 byte states : 1.37 | 2 byte states : 26.59 | 4 byte states : 0.00 +---------------------------------------------------------------- [ Number of patterns truncated to 20 bytes: 563 ] ERROR: Can't find pcap DAQ! Fatal Error, Quitting.. net-libs/daq is installed, but I don't even want to capture traffic, I just want to process the capture file. What configuration options should I be setting/unsetting in order to do offline analysis instead of real-time capture?

  Read the article

• Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace

  - by Nick

  I have an laptop top hard drive I was trying to use to my new media computer. The case is small and can accommodate for 2 2.5" drives, no 3.5" drives. I had been using the hard drive as storage hard drive until now. When I go to install Windows on the hard drive first I'm prompted at the bios of: Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace. And then again in the Windows Setup, informing me that the hard drive is bad. So I did a full format of the drive and tried again. Same error. So I took it out and hooked it back up to my other computer via an Sata usb adapter kit (maybe the cause?). The hard drive is recognized fine and when I scanned it for errors by going: right click -> properties -> tools -> error checking It returns that the hard drive is fine. I have tried 3 different SATA cables and multiple jumpers. When I plugged in my 1.5 tb 3.5" drive the computer that gives me the S.M.A.R.T. error on the 2.5" drive, recognizes it with no problems. Any ideas on why this is happening and how I can fix it?

  Read the article

• Google Play Music Not Adding MP3s On-Demand

  - by J0e3gan

  My recent attempts to add music on-demand to Google Play Music have yielded nothing - no "Processing music..." or "Added __ of __" messages, just nothing. Previously I could add music on-demand; and nothing has changed on the machine from which I successfully added music previously, from which I have tried to add music on-demand recently. What could be hampering my ability to add music on-demand? WHAT I'VE TRIED: Right after I started using GPM, I briefly found that I could not add music (on-demand), but the problem went away after a logout/login. This time a logout/login has not helped. Dragging & dropping or browsing to folders or files to add has made no difference either. Nor has waiting ridiculously long for GPM to show signs of life after adding music on-demand seemed to work. Digging deeper, I read a related Google Play Help article and followed its suggestions... ran the Google Play Music Manager troubleshooter = no errors or warnings double checked my available storage = 8 GB free double checked supported file types = MP3 is still supported (of course) ..., but the problem remains. UPDATE: I found that if I configure GPM to automatically upload music added to specific folders, it strangely does add automatically what it will not add on-demand.

  Read the article

• How can a Linux Administrator improve their shell scripting and automation skills?

  - by ewwhite

  In my organization, I work with a group of NOC staff, budding junior engineers and a handful of senior engineers; all with a focus on Linux. One interesting step in the way the company grows talent is that there's a path from the NOC to the senior engineering ranks. Viewing the talent pool as a relative newcomer, I see that there's a split in the skill sets that tends to grow over time... There are engineers who know one or several particular technologies well and are constantly immersed... e.g. MySQL, firewalls, SAN storage, load balancers... There are others who are generalists and can navigate multiple technologies. All learn enough Linux (commands, processes) to do what they need and use on a daily basis. A differentiating factor between some of the staff is how well they embrace scripting, automation and configuration management methodologies. For instance, we have two engineers who do the bulk of Amazon AWS CloudFormation work, and another who handles most of the Puppet infrastructure. Perhaps a quarter of the engineers are adept at BASH shell scripting. Looking at this in the context of the incredibly high demand for DevOps skills in the job market, I'm curious how other organizations foster the development of these skills and grow their internal talent. Scripting doesn't seem like a particularly-teachable concept. How does a sysadmin improve their shell scripting? Is there still a place for engineers who do not/cannot keep up in the DevOps paradigm? Are we simply to assume that some people will be left behind as these technologies evolve? Is that okay?

  Read the article

• Canonical Redirect on Dynamic Mass Virtual Hosts on Apache

  - by Josh

  I have a Web app on Apache that allows users to point their domain to the server. Right now I'm using Apache's dynamic mass virtual hosts with an entry VirtualDocumentRoot /www/hosts/%0/docs So with www.companydomain.com it points to /www/hosts/www.companydomain.com/docs The problem is when the user goes to companydomain.com it will point to /www/hosts/companydomain.com/docs Is there an easy way to automatically have Apache check to see if a directory exists for the virtual host, and if not, look for the host name with "www." in front of it? Other subdomains are fine (i.e. abc.domain.com should point to a diff. directory than def.domain.com) but the whole "www" issue is a mystery to me. I am using dynamic mass virtual hosts so the server does not have to restart after each registration for the application. If there is a different way that is fine as long as apache isn't restarted each time. How can I accomplish this? Worst case scenario if there were a way to redirect to a "default" location on the server if not found I could always do a check via PHP or something but I feel like that is a bit hacked together and there has to be a more efficient way. Thanks in advance!

  Read the article

• AWS Application - Subscription Payments Scheduled but Not Initializing

  - by nicorellius

  I briefly browsed the AWS forums but these are not nearly as easy to use and efficient as Stack Exchange derived ones, so here I am... the company I work for has an app on the AWS cloud. In general the app works well. However, since it is new, we haven't had many customers and the ones who signed up are now coming to the point where their subscriptions to our service should be renewed. In comes my question. When I query the database for payment status of certain subscriptions using the console, I get what I would expect: Instrument XYZ is on a Monthly subscription (subscription=xxxyyyzz). The subscription is active with an expiration date of 19 Apr 2010 10:43 Z The payment token will expire on 1 Dec 2012 12:00 Z There are xy runs remaining. The subscription fee of $XX.xx will be charged on 17 Apr 2010 10:43 Z OK, this is great. According to this, I would expect the next payment to be initiated on 17 Apr. The reason I am asking is because for a different user last month I got this same output but the payment never went through, i.e., was not initiated through Amazon payments. The user didn't see the payment go through and neither did we. It should be noted that the initial payments were received. The sign up process works and if the user goes to "pay" from within our app, they will be directed to https://payments.amazon.com to make their payment. Any ideas?

  Read the article

• Solaris Fibre Channel target - Configure QLogic QLA2340

  - by growse

  I'm currently trying to set up a small storage system as a fibre channel target. This is for testing, so I'm currently using Solaris (Nexenta) and a QLogic QLA2340 HBA. For some reason, the qlc and qlt drivers don't support the QLA2340, so I'm using the qla2300 driver from QLogic's website. I've also got the scli utility installed for configuration. The HBA is detected by the system. That said, it's not clear how I get from this point to a point where I have a ZFS volume being exposed as an FC target. I was originally following this guide (http://www.youtube.com/watch?v=yzEBd3l7Qn4) but it seems that without the qlc/qlt drivers, Sun's configuration tools won't work. Does that also imply that COMSTAR also won't work? What's the best way to expose an FC target with this setup? Most of the options I'm seeing in scli complain that the port state is LinkDown (it is, I've not plugged anything in yet). Do I have to have my FC client plugged up and working before I can configure the target? Apologies for the slight vagueness of the question, but I'm not overly familiar with the terminology.

  Read the article

• Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

  - by posdef

  I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

  Read the article

• EC2 Configuration

  - by user123683

  I am trying to create a server structure for my EC2 account. The design I have chosen consists of 2 instances running in different availability zones, elastic load balancer, an auto-scaling group with cloudwatch monitoring configured and a security group defining rules for access to the instances. This setup is to support an online web application written in PHP. I am trying to decide what is a better policy: Store MySQL DB on a separate Instance Store MySQL DB on an attached EBS volume (from what i know auto-scaling will not replicate the attached EBS volume but will generate new instances from a chosen AMI - is this view correct?) Regards the AMI I plan to use a basic Amazon linux 64 bit AMI, and install bastille (maybe OSSEC) but I am looking to also use an encrypted file system. Are there any issues using an encrypted file system and communication between the DB and webapp i neeed to be aware of? Are there any comms issues using the encrypted filesystem on the instance housing the webapp I was going to launch a second instance or attach a second volume in the second availability zone to act as a standby for the database - I'm just looking for some suggestions about how to get the two DB's to talk - will this be a big task Regards updates for security is it best to create a recent snapshot and just relaunch and allow Amazon to install updates on launch or is the yum update mechanism a suitable alternative - is it better practice to relaunch instead of updates being installed which force a restart. I plan to create two AMI snapshots one for the app server and one for the DB each with the same security measures in place - is this a reasonable - I just figure it is a better policy than having additional applications that are unnecessary included in a AMI that I intend on using. My plan for backup is to create periodic snapshots of the webapp and DB instances (if I use an additional EBS volume instead of separate instances my understanding is that the EBS volume will persist in S3 storage in the event of an unexpected termination and I can create snapshots of the volume backup purposes). Thanks in advance for suggestions and advice. I am new to EC2 and I may have described unnecessary overkill but I want to try implement what can be considered a best practice solution so all advice is appreciated.

  Read the article

• Exchange users moved mailbox now can't open some calendars

  - by Kip

  OK So the environment is Exchange sp on Windows 2003 server. This weekend we had to move a bunch of users of off one information store that was corrupt and onto a temp store delete the original dodgy store and then move the users back from the temp store to one of the three other stores under the same original storage group. Since then we are having some weird access issues relating to calendars. I am assuming it is all related, but it might not be. The problem is that users are unable to see any calendars that they have previously had access to. The weird thing is, that some of the users in question are not ones who have been moved nor are they trying to access calendars that belong to people whose accounts have been moved. Hence my assumption its related but possibly not. The message received is "Unable to display the folder. The calendar folder could not be found." here is the kicker, if i move someone who is trying to access other calendars, to a different mailbox store (thereby creating a new email account and sending stuff over), things start to work again. this to me indicates a permissions problem however I am unsure in what way. Looking for help out there please guys :) Cheers

  Read the article

• mysql is not connecting after data directory change

  - by user123827

  I've changed data directory in /etc/my.cnf. datadir=/data/mysql socket=/data/mysql/mysql.sock I also moved mysql folder from /var/lib/mysql/ to /data/mysql Now when i connect to mysql i get following error: [root@youradstats-copy mysql]# mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) also when i see /var/logs/msqld.log i get following messages in that: InnoDB: Setting log file /data/mysql/ib_logfile0 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 120704 7:43:31 InnoDB: Log file /data/mysql/ib_logfile1 did not exist: new to be created InnoDB: Setting log file /data/mysql/ib_logfile1 size to 512 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 300 400 500 InnoDB: Cannot initialize created log files because InnoDB: data files are corrupt, or new data files were InnoDB: created when the database was started previous InnoDB: time but the database was not shut down InnoDB: normally after that. 120704 7:43:36 [ERROR] Plugin 'InnoDB' init function returned error. 120704 7:43:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. I shut down mysql properly before doing these changes and then started it properly but dont know why getting these messages. please help to solve issue as i have changed socket path in my.cnf but still its pointing to old path...

  Read the article

• Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

  - by knda

  I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

  Read the article

• How to prevent blocking http auth popups on firefox restart with many tabs open

  - by Glen S. Dalton

  I am using the latest firefox with tab mix plus and tabgoups manager. I have maybe 50 or 100 tabs oben in different tab groups. When I shutdown firefox and start it again all tabs and tab groups are perfectly rebuilt. But I have also many pages open that are behind a standard http auth, and these pages all request their usernames and passwords. So during startup firefox pops up all these pages' http auth windows. And they block everything else in firefox, they are like modal windows. (I am involved in website development and the beta versions are behind apache http auth.) I have to click many times the OK button in the popups, before I can do anything. All the usernames and passwords are already filled in. (And the firefox taskbar entry blinks and the firefox window heading also blinks, and focus switches back and foth, which also annoys me. And sometimes the popups do not react to my clicks, because firefox is maybe just switching focus somewhere else. This is the worst.) I want a plugin or some way to skip those popups. There are some plugins I tried some time ago, but they did not do what I need, because they require a mouse click for each login, which is no improvement over the situation like it already is. This is not about password storage (because firefox already stores them). But of course, if some password storing plugin could heal this it would be great.

  Read the article

• 24TB RAID 6 configuration

  - by Phil

  I am in charge of a new website in a niche industry that stores lots of data (10+ TB per client, growing to 2 or 3 clients soon). We are considering ordering about $5000 worth of 3TB drives (10 in a RAID 6 configuration and 10 for backup), which will give us approximately 24 TB of production storage. The data will be written once and remain unmodified for the lifetime of the website, so we only need to do a backup one time. I understand basic RAID theory, however I am not experienced with it. My question is, does this sound like a good configuration? What potential problems could this setup cause? Also, what is the best way to do a one-time backup? Have two RAID 6 arrays, one for offsite backup and one for production? Or should I backup the RAID 6 production array to a JBOD? EDIT: The data server is running Windows 2008 Server x64. EDIT 2: To reduce rebuild time, what would you think about using two RAID 5's instead of one RAID 6?

  Read the article

• EXCEL generate a character in one column of a row, only if other columns in the same row are not bl

  - by Simon

  My speadsheet keeps track of when patients leave a specific floor of the hospital. There are columns in which where each patient goes is documented (1 column for "home", another column for "rehab facility", another for "other floor", etc.). Only when the patient leaves the hospital altogether does it count as a discharge, in which case the “discharge” column needs to have something in it. What formula can I use to generate, say, an "x" in the "discharge" column if certain "where they went" columns in the same row contain something, but not if there is nothing in any of them? Currently, to accomplish this I am using =IF(OR(M30,N30,O30,P30,Q30,R30,S30),"x") in row 3 of the "discharge" column (rows 1 and 2 are headings), and I have used "fill down" in all subsequent rows. To suppress the "FALSE" this formula yields when the condition is not true, I have applied conditonal formatting to the entire column that if the value=FALSE then the font is white (same colour as background). Is there a more efficient, elegant and idiot-proof way of doing this? The conditional formatting of text colour could potentially confuse everyone but the person who built the spreadsheet (me).

  Read the article

• Issue with InnoDB engine while enabling and [ skip-innodb ] - [ERROR] Plugin 'InnoDB' init function returned error

  - by Ahn

  How to enable InnoDB, which was previously disabled with skip-innodb option. Case 1: Disabled the innodb with skip-innodb option and show engines givens as below. Engine | Support ... | InnoDB | NO ...... Case 2: As I want to enable the innodb, I commanded the #skip-innodb option and restarted. But now the show engines even not showing the InnoDB engine in the list. ? Mysql Version : 5.1.57-community-log OS : CentOS release 5.7 (Final) Log: 120622 13:06:36 InnoDB: Initializing buffer pool, size = 8.0M 120622 13:06:36 InnoDB: Completed initialization of buffer pool InnoDB: No valid checkpoint found. InnoDB: If this error appears when you are creating an InnoDB database, InnoDB: the problem may be that during an earlier attempt you managed InnoDB: to create the InnoDB data files, but log file creation failed. InnoDB: If that is the case, please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/error-creating-innodb.html 120622 13:06:36 [ERROR] Plugin 'InnoDB' init function returned error. 120622 13:06:36 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 120622 13:06:36 [Note] Event Scheduler: Loaded 0 events 120622 13:06:36 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.57-community-log' socket: '/data/mysqlsnd/mysql.sock1' port: 3307 MySQL Community Server (GPL)

  Read the article

• Better way to design a database

  - by cMinor

  I have a conceptual problem and I would like to get your ideas on how I'll be able to do what I am aiming. My goal is to create a database with information of persons who work at a place depending on their profession and skills,and keep control of salary and projects (how much would cost summing all the hours of work) I have 3 categories which can have subcategories: Outsourcing Technician welder turner assistant Administrative supervisor manager So each person has its information and the projects they are working on, also one person may do several jobs... I was thinking about having 5 tables (EMPLOYEE, SKILLS, PROYECTS, SALARY, PROFESSION) but I guess there is a better way of doing this. create table Employee ( PRIMARY KEY [Person_ID] int(10), [Name] varchar(30), [sex] varchar(10), [address] varchar(10), [profession] varchar(10), [Skills_ID] int(10), [Proyect_ID] int(10), [Salary_ID] int(10), [Salary] float ) create table Skills ( PRIMARY KEY [Skills_ID] int(10), FOREIGN KEY [Skills_name] varchar(10) REFERENCES Employee(Person_ID), [Skills_pay] float(10), [Comments] varchar(50) ) create table Proyects ( PRIMARY KEY [Proyect_ID] int(10), FOREIGN KEY [Skills_name] varchar(10) REFERENCES Employee(Person_ID) [Proyect_name] varchar(10), [working_Hours] float(10), [Comments] varchar(50) ) create table Salary ( PRIMARY KEY [Salary_ID] int(10), FOREIGN KEY [Skills_name] varchar(10) REFERENCES Employee(Person_ID) [Proyect_name] varchar(10), [working_Hours] float(10), [Comments] varchar(50) ) So to get the total amount of the cost of a project I would just sum the working hours of each employee envolved and sum some extra costs in an aggregate query. Is there a way to do this in a more efficient way? What to add or delete of this small model? I guess I am missing something in the salary - maybe I need another table for that?

  Read the article

• Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD because of CD only drive.

  - by studiohack23

  Dell PowerEdge 1600SC Server won't boot from Fedora 12 DVD in the drive because it only supports CDs as I found out after the fact. I'm a complete novice @ servers, so if you need more detail, let me know, and I'll try to provide it. This server is around 4-6 years old. it has "PXE" boot, not sure what that means? This particular server has 3 RAID hard drives. As far as I know, they have all been wiped. I looked up the service tag on Dell, and it has: Compact Disk Drive, 650M, I Internal, Half Height, 48X, BlackHitachi LG Data Storage as its CD drive. Thus, the CD drive does not support DVDs, so installation will have to be via a live CD. However, I'm trying to put Amahi Home Server (http://www.amahi.org/), and Live CD/USB stick installs are not recommended unless one is an expert Linux user. any suggestions as to how to get around this? PROBLEM SOLVED! THANKS for all the help!

  Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291  | Next Page >