Search Results

Search found 31219 results on 1249 pages for 'ubuntu games'.

Page 284/1249 | < Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291 | Next Page >

VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

- by Aaron

I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

Read the article
Ubuntu 12.04 Precise on Dell Inspirion Duo

- by Roman M. Kos

I installed 12.04 version of Ubuntu on my Dell Inspiron Duo. After installing with help of program like UNetBootIn or smth like that. ( Besides i have no problem with kernel panic on chargin on/off like in 11.10. ) After that i followed with steps from here, in the first post here: http://ubuntuforums.org/showthread.php?t=1658635 There left one big problem with touchscreen: When i whant to drag with touchscreen like i`m doing it with mouse (for ex. selecting multile files with mouse) the selectable rectangular doesnot shows while im dragging, when dragging was finished (i put my finger off) it shows the rectangular and hides it. This thing disables all my tries to drag a window or smth else.... Also some time after using touchscreen such things are disabeling: - Often - click from a mouse (after keyboard using functinality restores) - less often - mouse movement disables (sometimes restores sometimes not) - lesser than other - keyboards works but no sygnals accepting (keyoards has indicator, so thay react, mouse of course not) The test from eTouchU utility passes perfeclty. Any idia for solving this problem? P.S.: Im from Ukraine, so sorry if my possible grammar mistakes. P.P.S.: Besides how to know the physicall position of my tabled mode? For automaticall rotating. Like on each rotation do some script.

Read the article
Is it possible to design a multiplayer game which can be played from different devices?

- by user9820

I want to design a online multiplayer game for all gaming devices e.g. Desktop PC, internet browser, android phones, android tablets, iphone, ipad, XBOX 360 etc. Now my main requirement is that, I want all devices can be used to play the game in multiplayer mode toghether i.e. One player can be connected using PC another using android phone and other may be with iphone or ipad. My doubts are - How to make all devices to connect to common game server? What will be the logic for graphics and texture because all devices screen will be of different aspect ratio?

Read the article
DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

- by user97591

I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

Read the article
Webcam doesn't work in Ubuntu 12.10

- by Kzhi

I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

Read the article
Is it possible to to have all pre-unity effects in latest ubuntu?

- by iamserious

I've been an Ubuntu dilettante for a long, long time. It is not my primary OS but I've always had it on all my laptops and desktop machines for over 8 years now. What I really, really like(d) about ubuntu (or linux, for that matter) was the effects - desktop cube, wobbly windows and other such "cool" effects. Needless to say, I was heartbroken with Unity. I gave it the benefit of doubt and tried to like it, tried to love it. Stuck with it for over a year. But I recently came to the conclusion that unity is really not for me. I want my old ubuntu back, with all it's eye candy effects. I tried messing around with ccsm but it only seemed to make the matters worse. Now, I could just install the old version of ubuntu - but getting my bamboo pen and Nvidia to work with it is a son of a.. anyway, the point is, old version of ubuntu is outdated to work with my newer machines. I'd rather have a new version of ubuntu but without unity- I don't know what the eye candy stuff is called - and so my question is this - Is it possible to rid ubuntu of unity and get all the eye candy stuff and if it is not possible, can you please advice me what other linux supports all the effects, please? I've searched high and low for unity alternatives but didn't find any satisfactory solutions; so I think my question is mainly about what other linux flavour is better suited for the task - sorry if it is out of topic.

Read the article
8 Bit Beats – Video Game Themes Remixed

- by Jason Fitzpatrick

What do you get when you cross classic video game themes with a club beat? These Subwoofer-maxing remixes take Link and Mario to the dance floor. Courtesy of NickplosionFX, the above video remixes The Legend of Zelda and Pac-Man with a healthy dose of back beat. Other offerings from 8 Bit Beats include a Super Mario Bros. 3 remix. Have a source for other great video game remixes? Sound off in the comments. 8 Bit Beats – Zelda/Pac-Man [YouTube] What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It?

Read the article
Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

- by Gaurav_Java

I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

Read the article
Ubuntu 13.10 No Sound

- by spiersie

I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

Read the article
Ubuntu stops using Nvidia driver after kernel upgrade

- by Daniel

Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

Read the article
Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

- by artfulrobot

I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

Read the article
Trying to recover deleted Ubuntu partition

- by user110984

I made a mistake in logging into my 200 GB Ubuntu partition. I could not access Grub after that. Using a live CD I then ran Boot_Repair and apparently deleted the partition, I guess because I ran it from my 70 GB Windows partition. I can send the results of boot_info before that and of Boot_Repair. Then I ran TestDisk, which apparently found only dev/sda/ -320GB / 298 / GiB - WDC - WD3200BEVT-22A23T0 (Was there any more I could have done with TestDisk? I looked at the TestDisk_Step_By_Step example and found no way forward given that no other partitions turned up) I have run gpart and found this: /sda1 - 15 GB /sda2 - system reserved /sda3 - 70.15 GB /sda4 - extended 212.84 unallocated - 209.10 /sda5 - unknown 3.74 . I have been told I can recover the partition using gparted's Rescue start end command, but I don't know what to enter for start and end. [--EDIT: TestDisk Deeper Search stated that "the following partitions can't be recovered" and listed a 220-GB Linux partition 6 times. Then it stated that "The current number of heads per cylinder is 255 but the correct value may be 128" and I could try to change it in the Geometry menu (because apparently these are overlapping partitions) So should I do that?--]

Read the article
Ubuntu 12.04 Faster boot, Hibernate & other questions

- by Samarth Shukla

I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

Read the article
PHP safe_mode is a pain, looking for advice (Ubuntu 12.04 server, public webserver)

- by user73279

Maybe askUbuntu isn't the right forum or I haven't provided the right search query but I haven't seen anything in my searching of askUbuntu on PHP safe_mode. I get lots of Windows Safe Mode and Ubuntu Safe Mode results but not PHP safe_mode. So I keep running into one issue after another regarding PHP safe_mode. (I write a lot of my own PHP code for various site maintenance tools and such.) I know safe_mode is going away in the next version of PHP but I still see a fair amount of advice recommending that you leave it enabled. I've recently consolidated from 3 servers down to 1 and at least one of those old servers had safe_mode disabled without any issues. (The lack of issues may have simply been a matter of good luck.) None of the previous 3 gave me this much trouble so I'm guessing so additional php.ini/PHP safe_mode setting was turned on for the new server. I primarily run WordPress for my websites with a few MediaWiki sites sprinkled in. And I am currently running into an issue using WordPress's auto update feature as it doesn't seem to be able to use fopen. WordPress is not relaying the actual error message to me but since I was just able to update the plugins I'm using this is a safe_mode problem. I've had a lot of safe_mode issues since consolidating to this new server. Long story short, the advice I'd seen to use safe_mode was all at least 2 years old. Do I really need it? If I disable PHP safe_mode are there a good set of security measures I should implement - i.e. chmod 640 /var/www/..., add this to your .htaccess, etc - to protect my server/sites? Thanks

Read the article
How to implment the database for event conditions and item bonuses for a browser based game

- by Saifis

I am currently creating a browser based game, and was wondering what was the standard approach in making diverse conditions and status bonuses database wise. Currently considering two cases. Event Conditions Needs min 1000 gold Needs min Lv 10 Needs certain item. Needs fulfillment of another event Status Bonus Reduces damage by 20% +100 attack points Deflects certain type of attack I wish to be able to continually change these parameters during the process of production and operation, so having them hard-coded isn't the best way. All I could come up with are the following two methods. Method 1 Create a table that contains each conditions with needed attributes Have a model named conditions with all the attributes it would need to set them conditions condition_type (level, money_min, money_max item, event_aquired) condition_amount prerequisite_condition_id prerequisite_item_id Method 2 write it in a DSL form that could be interpreted later in the code Perhaps something like yaml, have a text area in the setting form and have the code interpret it. condition_foo: condition_type :level min_level: 10 condition_type :item item_id: 2 At current Method 2 looks to be more practical and flexible for future changes, trade off being that all the flex must be done on the code side. Not to sure how this is supposed to be done, is it supposed to be hard coded? separate config file? Any help would be appreciated. Added For additional info, it will be implemented with Ruby on Rails

Read the article
Getting touchpad to work in desktop ubuntu

- by kamziro

I bought a small touchpad to stick on top of the keyboard, and it works fine on the windows computer, but not on my ubuntu desktop. I mean, when I do "xinput list" it shows the following: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PIXART USB OPTICAL MOUSE id=8 [slave pointer (2)] ? ? Logitech USB-PS/2 Optical Mouse id=11 [slave pointer (2)] ? ? Microsoft Wired Keyboard 600 id=13 [slave pointer (2)] ? ? Macintosh mouse button emulation id=14 [slave pointer (2)] ? ? Cirque Corporation 9925 AG Touchpad id=15 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? No brand SP04-A1 id=9 [slave keyboard (3)] ? Elite Silicon USB Audio Device id=10 [slave keyboard (3)] ? Microsoft Wired Keyboard 600 id=12 [slave keyboard (3)] The Cirque Corporation touchpad (I'm assuming that's the component name) is the touchpad. Is there anything I'm missing?

Read the article
Ubuntu 12.10 with kernel 3.5.0-18

- by Chaitanya

I had ubuntu 12.04 with kernel 3.0.2. Today I have updated my system and got 12.10 with kernel 3.5.0-18. Now when I boot my machine with 3.5 kernel, it starts until the page where I enter my password. Within seconds, I get a page with looooong list of some commands or list. I cant take screenshot of that. It looks something like, [1.2234978942837]kjsahfa;lsfksld;fkjsf;owieurwirejw/rnw;erkjwelrjw2309480432 [1.3294823498230948]as;lfjsf;iuwrijrwjlkerjw;rekwer;lkwjre;lkjRIJWEORIWE'JJA; something like this. Luckily, in my boot page, I have 3.0.2 kernel also. When I boot with 3.0.2 kernel there is no problem. But when I boot with 3.5.0, it throws that wierd error. I wont be able to do anything at that time. None of the keys work. I have to forcibly shutdown the machine and restart with 3.0.2 kernel. Please help..... Thanks, Chaitanya.

Read the article
Help setting up wireless in Ubuntu 13.04

- by James

I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

Read the article
Trouble WIth Immediate Shutdown in Ubuntu 13.10 with Cinnamon

- by Sneha429

Just installed Ubuntu on my family's computer. I thought the Cinnamon desktop environment would be better for my parents who have only ever used Windows. Everything works great until I try to shut down. Shutting down while in Cinnamon desktop brings up a prompt window that says it will shutdown in 60 seconds and gives the option to either suspend or cancel. The suspend button does not suspend the computer. Allowing the timer to countdown merely logs the current user out. Under power management, I have selected Shutdown Immediately for Power button action. I still get the same prompt. I have tried toggling between the other options, but regardless of what option is selected, the shutdown button always brings up the suspend or cancel prompt with no way to shutdown immediately. I would prefer not to use the power button for this as it is partially concealed with the computer desk. The fastest way to shutdown is to log out (which says it will log out in 60 seconds but also has log out and cancel buttons, so I can immediately log out) and then shutdown. I would prefer to have it automatically shut down. Any and all suggestions are appreciated. Thank you!

Read the article
Can Dungeons & Dragons Make You More Successful? [Video]

- by Jason Fitzpatrick

Dungeons & Dragons gets a bit of a bad rap in popular culture, but in this video treatise from Idea Channel, they propose that Dungeons & Dragons wires players for success. There are some deeply ingrained stereotypes about Dungeons & Dragons, and those stereotypes usually begin and end with people shouting “NERD!!!” But the reality of the D&D universe is a whole lot more complex. Rather than being an escape from reality, D&D is actually a way to enhance some important real life skillz! It’s a chance to learn problem solving, visualization, interaction, organization, people management… the list could go on and on. Plus, there are some very famous non-nerds who have declared an affinity for D&D, so best stop criticizing and join in if you want to be a successful at the game of life. While we’re trying not to let our love of all things gaming cloud our judgement, we’re finding it difficult to disagree with the premise that open-ended play fosters creative and adaptive thinking. Can Dungeons & Dragons Make You A Confident & Successful Person? [via Boing Boing] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

Read the article
No Wireless In Ubuntu 13.10

- by viktorhubinette

When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Read the article
Problems updating and re-installing VLC Ubuntu 11.10

- by irma claeys

I can't seem to fix or update, upgrade VLC AT ALL; this is what I get when trying to install, I had vlc before, but was not working properly so I uninstalled it; then I try to Install again to have the full properties. So now I cannot install as I get this message, I have tried everything and have checked with your site for additional info; any suggestions to someone who is new to Ubuntu and Linux altogether?? Package dependencies cannot be resolved This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time The following packages have unmet dependencies: vlc: Depends: vlc-nox (= 1.1.12-2~oneiric1) but 2.1.0~~git20121022+r2158-0~r88~oneiric1 is to be installed Depends: libaa1 (>= 1.4p5) but 1.4p5-38build1 is to be installed Depends: libavcodec-extra-53 (>= 4:0.7-1) but 4:0.7.6ubuntu0.11.10.1+medibuntu1 is to be installed Depends: libavutil-extra-51 (>= 4:0.7-1) but 4:0.7.6ubuntu0.11.10.1+medibuntu1 is to be installed Depends: libc6 (>= 2.8) but 2.13-20ubuntu5.3 is to be installed Depends: libfreetype6 (>= 2.2.1) but 2.4.4-2ubuntu1.2 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.6.1-9ubuntu3 is to be installed Depends: libqtcore4 (>= 4:4.7.0~beta1) but 4:4.7.4-0ubuntu8.2 is to be installed Depends: libqtgui4 (>= 4:4.5.3) but 4:4.7.4-0ubuntu8.2 is to be installed Depends: libsdl-image1.2 (>= 1.2.10) but 1.2.10-2.1 is to be installed Depends: libsdl1.2debian (>= 1.2.10-1) but 1.2.14-6.1ubuntu4 is to be installed Depends: libstdc++6 (>= 4.6) but 4.6.1-9ubuntu3 is to be installed Depends: libxcb-xv0 (>= 1.2) but 1.7-3 is to be installed Depends: zlib1g (>= 1:1.2.3.3.dfsg) but 1:1.2.3.4.dfsg-3ubuntu3 is to be installed

Read the article
What's the DCPU-16 thing all about?

- by ChrisRamakers

Ever since Notch (of Minecraft fame) announced his next project will include programmable 16bit cpu's ingame everybody seems to want to write VM's for the spec notch has written up. I've seen em written in C, C++, go, javascript, coffeescript, ... Can anyone enlighten me what's so special about the spec notch wrote up or is it just that it's the first game that actually contains a CPU ingame that you can do whatever you want with? It sparked my curiosity but I fail to grasp the thing that makes it so special suddenly everybody needs to write up code for it?

Read the article
Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

- by Iohannes

After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

Read the article
Unity calendar lens not showing events in Ubuntu 12.04

- by David_G

I'm trying to get proper/useful calendar integration into Ubuntu 12.04. I have a Google Calendar (& account) and I want to be able to use this without opening the browser. I want to get the Unity Calendar lens working, so that it shows events coming up, and it allows me a quick way to add new events. However, after installing it, it does not find any events, nor allow me to add a new event. Note that I've installed Lightning 1.4, Evolution mirror 0.2.3, Evolution, and unity-calendar lens. I've also installed Calendar-indicator. I suspect that somehow the lens is not getting the calendar information from thunderbird via evolution. A bit of searching around led me to try this command: /usr/lib/calendar-lens/calendar-lens-daemon.py. With this result: /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject Traceback (most recent call last): File "/usr/lib/calendar-lens/calendar-lens-daemon.py", line 324, in daemon = Daemon() File "/usr/lib/calendar-lens/calendar-lens-daemon.py", line 80, in init for calendar in evolution.ecal.list_calendars(): AttributeError: 'NoneType' object has no attribute 'list_calendars' Any ideas?

Read the article

< Previous Page | 280 281 282 283 284 285 286 287 288 289 290 291 | Next Page >