Search Results

Search found 9662 results on 387 pages for 'sales and operations plan'.

Page 285/387 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• AsteriskNow Migration / Shared Extension Space

  - by Aaron C. de Bruyn

  I am testing the possibility of migrating from an old Avaya phone system to AsteriskNow. The migration would cover several hundred phones--but spread out over several years. (Management wants to move buildings to the new phone system one by one as cables get cut or time permits.) Two other directive is that extensions must not change and they want a GUI that other admins (non-Linux geeks) can manage. They currently use 9XXX for all extensions. We linked the Avaya and Asterisk box via PRI card and they both are communicating. From the Avaya side, if we move (for example) extension 9001 to Asterisk, we forward the call over the PRI to the AsteriskNow box and the SIP phone rings. In AsteriskNow we have an outgoing rule '_9XXX' that routes all 4-digit extensions starting with 9 back to Avaya. Here's the trouble. Dialing 9001 (the extension moved over to AsteriskNow) causes the call to be routed out the PRI to the Avaya box, then the Avaya box routes the call back to Asterisk, and Asterisk routes it to the SIP phone. As we get more and more users switched over, it will use up more and more channels over the PRI card. Is there a way I can ask Asterisk to check it's local extensions first--then forward off to the Avaya system if it starts with '_9XXX'? (I know how I can do it when editing the raw config files, I'm just looking for a way to do it in the GUI so other admins can manage it if necessary.) As a last-ditch plan, I know I can specifically add '_9001' as an outgoing call rule and sent it directly to extension 9001--but I'd really hate to do that for several hundred phones

  Read the article

• "Modern" Ethernet over coax

  - by Electrons_Ahoy

  So, I've just bought a house. It's reasonably new - built in the early '00s. One of the features that got built in was a cable TV drop in every room. The cabling is gorgeous - there's even a wiring cabinet of sorts in a closet where the cables all tie together to the splitter to the outside line. Of course, my problem is that I only own the one TV. I do, however, own a few computers. What I would love to be able to do is drop a switch in the wiring closet and run 100/1000BASE-T ethernet over the coax in the walls I wouldn't otherwise be using. My fantasy would be if you could get some kind of adapter-plug-thing that would take a coax plug on one side and a cat5/RJ45 plug on the other. Had anyone else done this? Any suggestions? (There are a few other options that suggest themselves - first, I could just use the existing cabling channels and re-run cat5 or 6 through the walls. While tempting, that sounds like more work than I really want to put in, so I'm calling that Plan B. Also, I could just scare up a mess of old 10BASE2 cards and run the house on thinnet, all mid-90s style. While I think I'd get major style points for that, I don't think I can get a 10BASE2 adapter for the new laptop. Also, I have all these super-snazzy gigabit adaptors I'd like to be using. And so forth.)

  Read the article

• Hyper V Server 2012 Remote Management Using Workgroup

  - by Chris Kolenko

  I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

  Read the article

• 3d Studio Max and 2+CPUs - Core limit ?

  - by FreekOne

  Hi guys, I am scouting for parts to put in a new machine, and in the process, while looking at different benchmarks I stumbled upon this benchmark and it got me a bit worried. Quote form it: Noticably absent from this review is an old-time favorite, 3ds Max. I did attempt to run our custom 3ds Max benchmark on both the 2009 and 2010 versions of the software, but the application would simply not load on the Westmere box with hyper-threading enabled. Evidently Autodesk didn't plan far enough ahead to write their software for more than 16 threads. Once there is an update that addresses this issue, I will happily add 3ds Max back into the benchmarking mix. Since I was looking at dual hexa-core Xeons (x5650), that would put my future machine at 24 logical cores which (duh) is well over 16 cores and since I'm mostly building this for 3DS Max work, you can see how this would seriously spoil my plans. I tried looking for additional information on this potential issue, but the above article seems to be the only one who mentions it. Could anyone who has access to a 16 core machine or an in-depth knowledge about 3DS Max please confirm this ? Any help would be much appreciated !

  Read the article

• Performance variation

  - by Ree

  During my time spent working with multiple machines, I have noticed that performance of the same machine doing the same tasks in the same order differs and sometimes the difference is big enough to be noticeable. This applies to all the machines I've owned and/or maintained (old and modern). Some examples (many of them you may have noticed yourself) that sometimes are completed in different time frames: POST OS installation Hardware tests and operations (usually executed within a customized OS such as one of the many DOS variants), HDD tests and "low level" formats Software installation or other tasks (such as benchmarks) within a general purpose OS (Windows, Linux, etc) I can imagine this is caused by the fact that a machine is built with many components having to communicate as a whole and since the mechanical and electronic parts aren't perfect the overhead occurs. In the last example, I assume the OS complexity and concurrently running multiple processes has some additional effect as well. However, I'm wondering if this hardware imperfection and overhead is indeed that high to be humanly noticeable? Maybe there are other factors that are influencial as much or even more? So, in short - why? To emphasize: the difference is noticeable on the same machine performing the same tasks and this applies to ANY machine in my experience. I'm not comparing machine to machine performance.

  Read the article

• Passenger error: No such file or directory - config/environment.rb

  - by JJD

  I installed Redmine on MacOSX Server 10.6.8 according to this installation description. So far everything works fine: When I start webrick the server serves the Redmine pages. The gems and redmine are installed under the user "redmine". After that I aimed configuring apache2 with passenger as described here. As suggested by the description I also installed the passenger-pane which stores its virtual host configuration files in /private/etc/apache2/passenger_pane_vhosts. This is what I came up with after a lot of manual try and error. At least, now I can reach a passenger error page. // redmine.vhost.conf <VirtualHost *:80> ServerName host ServerAlias localhost DocumentRoot "/Users/redmine/Sites/redmine" # RackEnv production # RackBaseURI / RailsEnv production RailsBaseURI / # PassengerUser www-data # PassengerGroup www-data <Directory "/Users/redmine/Sites/redmine"> Order allow,deny Allow from all </Directory> </VirtualHost> However, the passenger module still runs into the following errors. Error message: No such file or directory - config/environment.rb The /var/log/apache2/error_log of the web server stated the following. [warn] NameVirtualHost *:80 has no VirtualHosts [notice] Apache/2.2.21 (Unix) Phusion_Passenger/3.0.12 configured -- resuming normal operations [ pid=21824 thr=2151905620 file=utils.rb:176 time=2012-06-01 18:22:07.126 ]: *** Exception Errno::ENOENT in PhusionPassenger::ClassicRails::ApplicationSpawner (No such file or directory - config/environment.rb) (process 21824, thread #<Thread:0x0000010086f2a8>): I experimented with the user switch functionality of passenger as described in the documentation - as you can tell from my configuration file. Though, I was not successful.

  Read the article

• Advice on migrating from a Samba PDC

  - by pgb

  When we started our software development company, we decided to use Samba as a PDC for the few Windows workstations we had. We use Samba with OpenLDAP, and it has been a good replacement for AD for almost 6 years now (using Windows XP workstations). Now I'm facing a few problems with our setup: The Linux server where the PDC runs is very outdated (and is a Gentoo install, don't ask why!) We started using Windows 7 on some of the workstations, and these can't join the Samba domain (there's a workaround, I know) Our company has grown a bit, and we have now about 20 workstations (and plan to have more in the near future). I have to reinstall our PDC, and was thinking on updating to another Linux distro and the latest Samba 3.4. However, I started having second thoughts, and now I think going to a Windows Server for the PDC is the way to go. The main drivers to opt for a Windows Server would be its easy administration and the ability to use Windows 7 out of the box, without any registry hacks. My question(s) then is(are): How should I do this migration? Can I keep the same domain name? What will happen to the users? Will they be recreated and won't be identified by the workstations as being the same user, even if the actual username is the same? What steps would you recommend me to migrate from Samba to Windows Server? Bonus question: If you think staying in Samba is the way to go with my current setup, I'm also interested on your thoughts.

  Read the article

• Hardware for a home server running Windows Server 2008 R2 Hyper-V or Microsoft Hyper-V Server 2008 R2

  - by David Hayes

  Hi, I'm planning to build a server to do the following Act as a file server (videos, pictures music) Run Squeezebox server Run Zune Software to allow wireless syncing to Windows Phone 7 I'd also like to aim for Low power usage (i'd settle for less than the 90-100Watts I'm using atm Flexibility, I might want to add a web server or sharepoint or... Something I can learn/test on, work is mainly a Windows shop but I do have Linux experience too I'd like to take a look at App-V (application virtualization) too I'd like it to cost less than $1000 Quiet would be nice but not essential (it'll be in the basement) I'm thinking of getting a technet subscription to get access to Windows Server 2008 R2 at a reasonable price ($199) So my plan was this Get a bunch of 2TB Caviar green drives to RAID up (RAID 1 or 6 probably) Get a Quad core CPU (Intel i5/i7 probably) Install a Hypervisor Install w2k8 R2 Storage Server for a NAS Install Windows 7 Pro to run Zune/Squeeze box Install any other machines I want to play with Questions Can anyone see any issues with this or have any better ideas? Do you think I'd need an i7 over an i5? Is 4 cores enough/too much? Can anyone sugest a nice, reasonably priced case that will hold 6-8 drives and stay cool Should I wait for Sandy Bridge parts?

  Read the article

• Is there a way to tell what the download speed is from a site/server

  - by Memor-X

  i'm looking into which ISP i should go with at the place i'm moving into, one ISP which i have been told good things about has data limits (which when breached will drop your speed to dial-up speed) but multiple memberships which, apart from the cheapest membership, have the same data limits (the cheapest has a 10GB data limit) in their fine print, they say that each different membership has different port speeds, one particular part jumps out at me These speeds are the NBN (National Broadband Network) port speed and not the actual Internet data speed which will vary based on numerous factors including destination you are reaching, your network equipment, network congestion etc. i plan to use the net to download DLC and patch updates for games (particular the insanely large update for the Wii U) and games from Steam (if i find any good one other than this one JRPG) and downloading development resources from free sites like Deposit Files and Mediafire since one membership with a 1000GB data limit is $145 with the port speed being 12Mbps/1Mbps (cheapest) while another with the same limit is $190 with the port speed of 100Mbps/40Mbps (expensive) i am wondering how i can tell what the speed coming from site is since i don't want to be wasting money on speed that makes no difference (unlike memory which i rather have to spare) NOTE: the speeds are for a fiber optic network which where my new place is can only connect via fixed wireless which i may not be able to get with this ISP but if i can get this network then good NOTE 2: most of the resources i get from Deposit Files are always about 200 MB or less, if a resource pack is greater then it's split into multiple archives (like .7z.part) while Mediafire i have to see one bigger than 150MB NOTE 3: one update patch for a PS3 game is close to 4 GB (Disgaea 4) which i need to get access to the DLC and on the weekend i downloaded 5 GB for the Final Fantasy XIV Open Beta for the PS3 which took almost 5 hours

  Read the article

• XAMPP - Apache service stops running after few seconds.

  - by Fábio Antunes

  Hello I have this big problem with my Xampp server, for some reason the Apache service stops running after a few seconds it as been started, and i have no idea what the problem is, and the error logs don't say much about the problem. [Fri May 07 01:09:32 2010] [notice] Digest: generating secret for digest authentication ... [Fri May 07 01:09:32 2010] [notice] Digest: done [Fri May 07 01:09:33 2010] [notice] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 configured -- resuming normal operations [Fri May 07 01:09:33 2010] [notice] Server built: Nov 11 2009 14:29:03 [Fri May 07 01:09:33 2010] [crit] (22)Invalid argument: Parent: Failed to create the child process. [Fri May 07 01:09:33 2010] [crit] (OS 6)O identificador é inválido. : master_main: create child process failed. Exiting. [Fri May 07 01:09:33 2010] [notice] Parent: Forcing termination of child process 36 identificador é inválido (pt_PT) = identifier is invalid. Note: No other applications is using the Apache port. I have done some changes to the httpd.conf file but, it as worked well for allot of time. Added some virtual hosts. Enabled xdebug. As this happen to anyone, that could tell me whats the problem? Thanks for your time.

  Read the article

• Getting at fsid under Linux? Or an alternate way of identifying filesystems?

  - by larsks

  In an environment with automounted home directories, such that the same filesystem exported by a fileserver may be mounted multiple times on the client, I would like to authoritatively be able to identify whether two mountpoints are in fact the same filesystem. That is, if the remote server exports: /home And the local client has: # mount fileserver:/home/l/lars on /home/lars type nfs (rw...) fileserver:/home/b/bob on /home/bob type nfs (rw...) I am looking for a way to identify that both /home/lars and /home/bob are in fact the same filesystem. In theory this is what the fsid result of the statvfs structure is for, but in all cases, for both local and remote filesystems, I am finding that the value of this structure member is 0. Is this some sort of client-side issue? Or do most modern NFS servers simply decline to provide a useful fsid? The end goal of all of this is to robustly interpret the output from the quota command for NFS filesystems. For example, given the example above, running quota as myself may return something like: Disk quotas for user lars (uid 6580): Filesystem blocks quota limit grace files quota limit grace otherserver:/vol/home0/a/alice 12 52428800 52428800 4 4294967295 4294967295 fileserver:/home/l/lars 9353032 9728000 10240000 124018 0 0 ...the problem here being that there exists a quota for me on otherserver which is visible in the results of the quota command, even though my home directory is actually on a different device. My plan was to look up the fsid for each mountpoint listed in the quota output and check to see if it matched the fsid associated with my home directory. It looks like this won't work, so...any suggestions?

  Read the article

• administrator user unable to login, suspicious user accounts "sky$", "admin$"

  - by mks

  I have a Windows 2008 R2 Standard (64 bit) running in a virtual machine. Suddenly from yesterday onwards I am not able to login as administrator. Nobody changed the password. Both in the console as well as using remote desktop I am unable to login. Whenever I login as Administrator I am getting this error: "The user name or password is incorrect" Nothing has changed in the machine and I have logged in the past successfully both through console and via remote desktop several time on the same machine. One strange behaviour I noticed is, I am seeing some additional user accounts if I try to login as other user. The suspicious user account are: sky$ admin$ SUPPORT_388945a0 Is it created by some malware/virus? Or is it some windows hidden account? Microsoft site says that SUPPORT_388945a0 is: The Support_388945a0 account enables Help and Support Service interoperability with signed scripts. This account is primarily used to control access to signed scripts that are accessible from within Help and Support Services. Administrators can use this account to delegate the ability for an ordinary user, who does not have administrative access over a computer, to run signed scripts from links embedded within Help and Support Services. These scripts can be programmed to use the Support_388945a0 account credentials instead of the user’s credentials to perform specific administrative operations on the local computer that otherwise would not be supported by the ordinary user’s account. When the delegated user clicks on a link in Help and Support Services, the script executes under the security context of the Support_388945a0 account. This account has limited access to the computer and is disabled by default. However I am not sure from where this "admin$" and "sky$" came. Anyone has similar experience?

  Read the article

• How to stop SophosAV from scanning directories under source control

  - by user26453

  From googling it seems its well known that SophosAV as well as other AV programs have issues with how they interact and can inhibit source control utilities like TortoiseHG or TortoiseSVN. One solution is to exclude directories under source control from on-access scanning as detailed here on Sophos's support site. There is a corollary article that mentions some issues related to this, namely need to place multiple entries for exclusions based on the possibility of the location being accessed through the short vs. long name (e.g., Progra~1 vs. "Program Files"). One other twist is I am using a junction to relocate my user directory, C:\Users\Username, to a second hard drive, E:. Since I am not sure how this interacts I have included the source control directory as they are nested in both locations. As a result, I have included the two exclusions for the on-access scanning exclusions (and to be on the safe side on-demand exclusions as well, although this should only come into play when I select a parent directory of the exclusion to be scanned on-demand, but still). You'll notice I have no need to add extra exclusions for those locations based on short vs. long name distinctions. The two exclusion I have then, for both on-access and on-demand scanning exclusions are: C:\Users\Username\source-control-directory E:\source-control-directory However, this does not seem to work as TortoiseHG still lags terribly in response to any request as AV software starts scanning when the directory is accessed via TortoiseHG. I can verify without a doubt that Sophos is causing the problems: I can completely disable on-access scanning. Once this is done TortoiseHG responds very fast to all operations. I cannot leave this disabled obviously, but since the exclusion don't seem to be working, what next?

  Read the article

• Split Excel worksheet into multiple worksheets based on a column with VBA (Redux)

  - by Ceeder

  I'm rather new to VBA and I've been working with the code generously displayed and explained by Nixda: Split Excel Worksheet... My only challenge is I've been trying desperately to find a way to include the top 3 rows as a title bu it seems to only allow for one. Here's the code have: Dim Titlesheet As Worksheet iCol = 23 '### Define your criteria column strOutputFolder = (Sheets("Operations").Range("D4")) '### <--Define your path of output folder Set ws = ThisWorkbook.ActiveSheet Set rngLast = Columns(iCol).Find("*", Cells(3, iCol), , , xlByColumns, xlPrevious) Set Titlesheet = Sheets("Input") ws.Columns(iCol).AdvancedFilter Action:=xlFilterInPlace, Unique:=True Set rngUnique = Range(Cells(4, iCol), rngLast).SpecialCells(xlCellTypeVisible) If Dir(strOutputFolder, vbDirectory) = vbNullString Then MkDir strOutputFolder For Each strItem In rngUnique If strItem < "" Then Sheets("Input").Select Range("A1:V3").Select Selection.Copy ws.UsedRange.AutoFilter Field:=iCol, Criteria1:=strItem.Value Workbooks.Add Sheets("Sheet1").Select ActiveSheet.PasteSpecial ws.UsedRange.SpecialCells(xlCellTypeVisible).Copy Destination:=[A4] strFilename = strOutputFolder & "\" & strItem ActiveWorkbook.SaveAs Filename:=strFilename, FileFormat:=xlWorkbookNormal ActiveWorkbook.Close savechanges:=False End If Next ws.ShowAllData Is there something I can change to include these lines? Thanks so much, this code provided by Nixda has taught me a great deal!

  Read the article

• Apache & SVN on Ubuntu - Post-commit hook fails silently, pre-commit hook “Permission Denied”

  - by 113169587962668775787

  I've been struggling for the past couple days to get post-commit email notifications working on my SVN server (running via HTTP with Apache2 on Ubuntu 9.10). SVN commits work fine, but for some reason the hooks are not being properly executed. Here are the configuration settings: - Users access the repo via HTTP with the apache dav_svn module (I created users/passwords via htpasswd in a dav_svn.passwd file). dav_svn.conf: <Location /svn/repos> DAV svn SVNPath /home/svn/repos AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user </Location> I created a post-commit hook file that writes a simple message to a file in the repository root: /home/svn/repos/hooks/post-commit: #!/bin/sh REPOS="$1" REV="$2" /bin/echo 'worked' > ${REPOS}/postcommit.log I set the entire repository to be owned by www-data (the apache user), and assigned 755 permissions to the post-commit script when I test the post-commit script using the www-data user in an empty environment, it works: sudo -u www-data env - /home/svn/repos/hooks/post-commit /home/svn/repos 7 But when I commit on a client machine, the commit is successful, but the post-commit script does not seem to be executed. I also tried running a simple script for the pre-commit hook, and I get an error, even with an empty pre-commit script: "Commit failed (details follow): Can't create null stdout for hook '/home/svn/repos/hooks/pre-commit': Permission denied" I did a few searches on Google for this error and I presume that this is an issue with the apache user (www-data) not having adequate permissions, specifically to execute /dev/null. I also read that the reason post-commit fails silently is because that it doesn't report with stdout. Anyway, I've also tried giving the apache user (www-data) ownership of the entire repository, and edited the apache virtualhost to allow operations on the server root, and I'm still getting permission denied /etc/apache2/sites-available/primarydomain.conf <Directory /> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> Any ideas/suggestions would be greatly appreciated! Thanks

  Read the article

• Cygwin, ssh, and git on Windows Server 2008

  - by Paul

  Hi everyone. I'm trying to setup a git repository on an existing Windows 2008 (R2) server. I have successfully installed Cygwin & added git and ssh to the packages, and everything works perfectly (thanks to Mark for his article on it). I can ssh to localhost on the server, and I can do git operations locally on the server. When I try to do either from the client, however, I get the "port 22, Bad file number" error. Detailed SSH output is limited to this: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to {myserver} [{myserver}] port 22. debug1: connect to address {myserver} port 22: Attempt to connect timed out without establishing a connection ssh: connect to host {myserver} port 22: Bad file number Google tells me that this means I'm being blocked, usually, by a firewall. So, double-checked the firewall settings on the server, rule is there allowing port 22 traffic. I even tried turning off the firewall briefly, no change in behavior. I can ssh just fine from that client to other servers. The hosting company swears that there's no other firewalls blocking that server on port 22 (or any other port, they claim, but I find that hard to believe). I have another trouble ticket into them, just in case the first support person was full of it, but meanwhile I wanted to see if anyone could think of anything else it can be. Thanks, Paul

  Read the article

• Amazon AWS EC2 + Puppet, get Puppet to know AWS instance tags

  - by Piotr Jasiulewicz

  I am having a problem with my AWS deployment, fairly new to AWS and Puppet. So coming to my question - can you distinguish puppet nodes with AWS machine tags or CNAME domains? A little background about the plan: have multiple clusters of machines, one php cluster, one legacy php cluster, one java cluster, one perl cluster control configuration with puppet - still pretty new to puppet but as a developer I like the idea of being able to version control configuration of servers have autoscaling enabled on those clusters - obviously the main benefit of the cloud that makes the much hight cost when it comes to any reasonable performance worth it (those amazon machines are slower than my phone...) deployment controlled by Capistrano, this makes things a lot easier So in AWS you get those super nasty public/private machine dns's... no way you can identify machines on those. In order to easer the problem, seams like AWS want's you to tag everything - so I did. Found a script that makes a CNAME record for each machine with the tag "ShortName" thanks to the Route53 API. Every machine has a ShortName tag that becomes its CNAME, unfortunately puppet still resolves the private dns name. I'd like to have node 'perl-cluster'{} in puppet, anyone any clue ho to achieve this? Thanks

  Read the article

• Can I change the user id of a user on one Linux server to match another server in /etc/passwd?

  - by user76177

  I have a Rails application that is on a virtual machine (RHEL 6) and it's database is on dedicated hardware (also RHEL 6). The app server has an NFS directory from the db server mounted and accessible. It needs to write images to that server that are uploaded via the app. Background processes on the db server need to read and write to the same directory, as they perform resizing operations on the uploaded files. Right now none of this is working, because the user ids are different between the two systems. I only need this to work for this one application, so it is way too much overhead to put an LDAP system in place. Can I simply change the user id of this one user in one of the systems, or will that cause mass chaos? UPDATE: The fix worked, at least on local devices. Unfortunately the device I have mounted to the main db server still thinks my user id is 502 instead of 506. Do I need to remount that device, or is there an NFS daemon I can stop and restart to refresh it?

  Read the article

• Leopard Network Shares and browsing are unreliable

  - by EvilChookie

  I have two macs, running Leopard 10.5.8. One is the 13" MBP connected via WiFi, and the other is a 24" 2008 iMac, connected via ethernet. There are at least another 6-10 machines (windows and mac) awake on the network (with shares) at any given time, yet there are plenty of times where I cannot see any devices/shares in either my "Shared" section in Finder, nor can I see any computers in "Network" in Finder. Restarting doesn't help. I've restarted all the networking gear in the house to no avail. Our network is a series of gigabit switches connected to a D-Link gaming router. I believe we use OpenDNS, and our provider is Cox. I hate having to use "Go - Connect to Server" to browse to commonly used file shares (by IP). I'd like to know why my shares do not always and consistently appear in Leopard. Edit: I ran OnyX this morning, and performed the cleaning and maintenance operations (including disk permissions) on both my Macs, and at least one of my macs has started showing network devices again. (the other is still going). No idea how long this will last. Any ideas as to what is causing this issue, and how to prevent it? Edit 2: Aaaand there the shares go again. So running OnyX is not a permanent or reliable fix for this issue. Edit 3: After a clean reinstall and update, network shares are still unreliable. The SMBClient command mentioned in comments shows me the information it's supposed to show, but the shares do not appear in the shared section. They'll also vanish at random and reappear at random throughout the day.

  Read the article

• Fedora-13 not detecting USB HDD enclosure (with HDD)

  - by Ramy

  I recently purchased this enclosure: http://www.amazon.com/Inland-2-5-Inc.../dp/B003SZ2Y12 and this HDD: http://www.amazon.com/Seagate-Barrac...3811667&sr=8-1 Now, I let my brother in law use the enclosure with his 160GB disk to back some stuff up. He then gave me that disk in my enclosure and I backed up my computer and my fiances computer. So...obviously, i had no problem mounting that disk. I plan on keeping this disk as my "natural disaster backup" (in case my apartment building burns down, i still have that disk with my stuff backed up). I want to use the 1.5T disk as my regular/more frequent backup device, but it doesn't seem to be mounting to my F-13 machine. I searched through this forum and found someone advising to run the following: # mount -t vfat /dev/sda1 /mnt this is the output i get when I run that: mount: /dev/sda1 already mounted or /mnt busy mount: according to mtab, /dev/sda1 is mounted on /boot Thing is, shouldn't this disk automatically mount just like the LAST disk in the same enclosure with the same USB cable and power supply? Any help would be greatly appreciated. THANKS!

  Read the article

• Will this increase my Virtual private Server failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange << should live inside MWS2008 ? or standalone without OS? install Team foundation server << should live inside MWS2008 ? or standalone without OS? on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler to measure for this about one VPS can only install what what what service ? because of my resource is limited =.@ may i know if it is install in this way,maybe it seem like defeat the way of "VPS"... what will happen ? or any guideline on this issue (fully configuring the window server 2008 R2) ? Thx for reply

  Read the article

• Online Storage and security concerns

  - by Megge

  I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

  Read the article

• How do you add a domain name to a VPS?

  - by jasonaburton

  Hi all, I have a VPS with allgamer.net (I use it to play minecraft). I also have a domain name with networksolutions.com What I want to do is attach that domain name to the VPS. I want to run a wiki on my domain name. If this is possible I can avoid buying another hosting plan just for the wiki. How do I go about doing this? I have very little knowledge in server administration so any advice you guys have is greatly appreciated! I'm pretty sure I have to change the DNS in my domain name to the DNS for my VPS, but on allgamer.net's interface there is no discernable place to find out what I need to change it to. Is there a way to find out the DNS via SSH on my VPS? As well, when I first got my VPS with allgamer.net I filled out a form for it with all my information, but they also wanted a domain name along with it. I gave them the domain name I currently own, but for some reason, it's like it's not connected to the VPS, like if I go to mydomain.com there's nothing, as well, if I use mydomain.com for my minecraft server, it also doesn't work. It's as if it's serving no purpose by being "attached" to my VPS. Any insights into this? Thanks for any help you guys can give me.

  Read the article

• Windows 7 Backup - Does the "system image" include all the files on my drive?

  - by Vaccano

  I have a new Dell Laptop that I have setup the way I like it. I want to use Windows 7 to do a backup and then restore that backup on a different hard drive (solid state). When I setup the backup info (manually) for Windows 7 Backup there is a little checkbox at the the bottom that says: Include a system image of drives: RECOVERY, OS (C:) I can also select to backup all my data on the C: drive (the only hard drive I have anything on) as well as some libraries (which are on my C: drive so no point in selecting those). The question I have is, does Windows 7 Backup just somehow know what needs to be restored (ie program files and Windows and the registry ....? Or is it really making a full restorable copy of the C: drive? (If the later is true then I don't need select the C: drive to be "backed up" if I don't plan to access the files except by restoring them right? (Because the system image will already have it all.)) So, which way is it? What is saved in the System Image?

  Read the article

• hMail server - sending copy of an e-mail changing the sender

  - by Beggycev

  Dear All please help me with following request. I am using hMail server in a company(test.com) and have several hundred of guest e-mail accounts ([email protected]). I need to accomplish this: When any of the guest e-mails receives a message(either from internal or external sender) this e-mail(or its copy) is sent to another address "[email protected]" which is the same for all of these guest e-mails. But I need the sender to be identified as the [email protected] not as the original sender which happens when I use forwarding. I tried to prepare a simple VBS script using the OnAcceptMessage event to accomplish this. and it works on my testing machine without internet connectivity but not in the production environment. To be specific, if I send an e-mail to [email protected] in my test env it is delivered to the [email protected] with [email protected] being a sender. But in the production env the e-mail stays in the guest mailbox with the original sender. I am interested in any solution, using a rule in hMail or script, anything is welcome. Thank you for any help! The script: Sub OnAcceptMessage(oClient, oMessage) 'creating application object in order to perform operations as hMail server administrator Dim obApp Set obApp = CreateObject("hMailServer.Application") Dim adminLogin Dim adminPassword 'Enter actual values for administrator account and password 'CHANGE HERE: adminLogin = "Admin_login" adminPassword = "password" Call obApp.Authenticate(adminLogin, adminPassword) Dim addrStart 'Take first 5 characters of recipients address addrStart = Mid(oMessage.To, 1, 5) 'if the recipient's address start with "guest" if addrStart = "guest" then Dim recipient Dim recipientAddress 'enter name of the recipient and respective e-mail address() 'CHANGE HERE: recipient = "FINAL" recipientAddress = "[email protected]" 'change the sender and sender e-mail address to the guest oMessage.FromAddress = oMessage.To oMessage.From = oMessage.To & "<" & oMessage.To & ">" 'delete recipients and enter a new one - the actual mps and its e-mail from the variables set above oMessage.ClearRecipients() oMessage.AddRecipient recipient, recipientAddress 'save the e-mail oMessage.save end if End Sub

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >