Search Results

Search found 23449 results on 938 pages for 'browser close'.

Page 287/938 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

• Computer freezing while watching Flash videos from net

  - by t3st

  I have a Windows 7 home basic, while watching videos from net (within 5 minutes) computer starts to freeze and shows 100 percent CPU usage. I first thought it's a browser issue but watching videos from different browsers also has the same issue. My system runs the latest Firefox browser and all my plugins (including Flash) is up-to-date. After this when I shutdown/restart the computer it will go to the login window with out any problem. From there when I tried to log in to any account, the system starts to freeze and again I have to start and run Windows in safe mode (which doesn't show any problem). I read it in an article to do these steps CMD->sfc/scannow chkdsk after that only my system works normally, even now I can't watch any videos on the net otherwise it starts freezing( I can watch downloaded videos in computer without a problem) and have to do the whole process once more (which takes a lot of time). while running sfc/scannow its showed results that some of the files are corrupted and it could not be repaired. Can this be the cause for freezing of my computer while running Flash videos? or is it a hardware related problem? What different steps do I have to take to correct those corrupt files? System restore works only some times.

  Read the article

• Nginx load balancing and maintaining URLs

  - by Steve Klabnik

  I'm trying to use nginx as a load balancer, and it's working great. One problem, though. The load balancing box is at 123.123.123.123, and the backend box is 456.456.456.456. So I have this config: upstream backend { server 456.456.456.456; } server { listen 80; server_name 123.123.123.123; access_log off; error_log off; location / { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://backend; } } This works great. I hit 123.123.123.123 in my browser, and the page comes up. But now the URL in the browser says http://456.456.456.456. Do I need to use a rewrite rule or something to keep the url correct? I don't want it to be different when going to different backed servers. None of the tutorials I've read have mentioned anything about this.

  Read the article

• Can't Connect SQL server - process being used by another process. Conflict with IIS?

  - by shinya

  I'm having problem connecting to MS SQL Server (2012 Express) after accessing a database through IIS (web site). I can access the data through web site no problem, but I can't access the data from any other programs (i.e SSMS) until I reboot the SQL server. It seems that the connection stays open even if I close a browser. Here is error message I'm getting Unable to open the physical file "C:---------". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Unable to open the physical file "C:-------". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Cannot open user default database. Login failed. Login failed for user 'Myserver\myname'. (.Net SqlClient Data Provider) Server Name: MYPC\SQLEXPRESS Error Number: 5120 Severity: 16 State: 101 Line Number: 65536 I follow the help link and it told me to move TCP before named pipes in the protocol order list. I tried it but it didn't help at all. What is the proper settings on SQL server or IIS in order to release process after closing a browser. How do I avoid getting this error? Thank you for your help

  Read the article

• Printing a PDF results in garbled text (sometimes)

  - by Scott Whitlock

  We have a system that renders a report as a PDF, and displays it in the browser for the user. In the browser, the document always appears to display fine, but when printed on one machine, it sometimes changes some of the data in the report to seemingly random characters. Here are some examples of the strings it inserts: Ebuf; Bvhvt ul1: -!3122 Ti jqqf e!Wjb; Nfttf ohf s!Tf swjdf Additionally, the inter-character spacing is weird. It sometimes writes characters overlapping each other. I noticed some repetition in the garbled text, so I typed a few of them into Google, and surprisingly got a lot of hits. Here is the string I searched for: pdf cjmp ebuf nftf up! The Google search summaries contain the garbled text. However, when I click on those links in Google, I get perfectly readable PDF files. It's as if Google's PDF crawler has the same bug. Has anyone figured this out? Is this an Acrobat Reader bug?

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• New router, slower internet connection?

  - by qwerty

  So, we just bought a new router a few hours ago, and it does work. However, for some reason the speed is just ridiculously slow (compared to before, at least)! If i run a test on speedtest.net i get the following results: http://i.imgur.com/68JyH.png which are pretty good. But for some reason it's like the connection just "hangs" for a second when i navigate to a site through the browser (have tried different browsers). It's not on all sites, it kind of happens randomly. I think the browser cache might be speeding some sites up, because if i visit a site that i HAVEN'T visited before (since i cleared my cache), it takes like two seconds (if not more) to open the site. If i have visited it, it opens directly (it barely loads). Not sure what to do, really. Any suggestions on what might speed it up? Any settings i can play with in the router settings? The router is of the brand Belkin. I'm not sure about the model though, it says "Belkin, Play Max Wireless Router" on the box? Thanks in advance! EDIT: Alright, it takes a lot more than two seconds. At least 3-4 depending on the site. Any suggestions?

  Read the article

• Apache: getting proxy, rewrite, and SSL to play nice

  - by Rich M

  Hi, I'm having loads of trouble trying to integrate proxy, rewrite, and SSL altogether in Apache 2. A brief history, my application runs on port 8080 and before adding SSL, I used proxy to strip the 8080 from the url's to and from the server. So instead of www.example.com:8080/myapp, the client app accessed everything via www.example.com/myapp Here was the conf the accomplished this: ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> ProxyPass /myapp http://www.example.com:8080/myapp ProxyPassReverse /myapp http://www.example.com:8080/myapp What I'm trying to do now is force all requests to myapp to be HTTPS, and then have those SSL requests follow the same proxy rules that strip out the port number as my application used to. Simply changing the ports 8080 to 8443 in the ProxyPass lines does not accomplish this. Unfortunately I'm not an expert in Apache, and my skills of trial and error are already reaching the end of the line. RewriteEngine On RewriteCond %{HTTPS} off RewriteRule myapp/* https://%{HTTP_HOST}%{REQUEST_URI} ProxyRequests Off <Proxy */myapp> Order deny,allow Allow from all </Proxy> SSLProxyEngine on ProxyPass /myapp https://www.example.com:8443/mloyalty ProxyPassReverse /myapp https://www.example.com:8433/mloyalty As this stands, a request to anything on the server other than /myapp load fine with http. If I make a browser http request to /mypp it then redirects to https:// www.example.com:8443/myapp , which is not the desired behavior. Links within the application then resolve to https:// www.example.com/myapp/linkedPage , which is desirable. Browser requests (http and https) to anything one level beyond just /myapp ie. /myapp/mycontext resolve to https:// www.example.com/myapp/mycontext without the port. I'm not sure what other information there is for me to give, but I think my goals should be clear.

  Read the article

• Understanding Unix Permissions (w/ ACL)

  - by Dr. DOT

  I am trying to set permissions on my server properly. Currently I have a number of directories and files chmod'd at 0777 -- but I am not comfortable with it being this way. So at the advice of a serverfault specialist, I had my hosting provider install ACL on my shared virtual server. When I FTP to the server as my FTP user account "abc", I can do everything I need to do (and rightfully so) because all my dirs and files are owned by "abc", the group is "abc", and the 1st octet is set to 7 (rwx). That much I get. But here's where it gets dark gray for me. PHP is set to user "nobody". so when someone browses on of my web pages that either ends in .php or has some embedded PHP, I assume the last octet controls the access. Because all my dirs and files are owned by "abc" and assigned to group "abc", if the last octet was a 4 (r--) then the server would let the browser read the file. If it were a 6 (rw-) then the server would let the browser also write to the file or directory, correct? what if the web document does not end in .php or does not have any PHP embedded? What is the user then? how can I use ACL to not set the permission to 6 (rw-) or even 7 (rwx)? [not sure what execute does or means] Just looking for some sort of policy settings to best lock down my dirs and files while allowing my PHP scripts to do uploads and write to files (so my users don't call me to tell me "permission denied". Ok, thanks to anyone out there willing to lend me a hand. It is greatly appreciated.

  Read the article

• Netbook thinks it is a desktop

  - by Narcolapser

  Question: Are, and if so what, there packages for download that I can get netbook to understand it is not a desktop and that it is a netbook. Info: I'm running an Acer Aspire One with ubuntu desktop 9.10. I tried Ubuntu Netbook Remix first but it has graphics issues with the aspire one. So I changed to Ubuntu Desktop. It was the only distro (after debian, centOS, Fedora, and Knoppix all failed me) that I managed to get working. The only thing is that it is having issues doing things that a netbook/laptop should be doing. most notably is that it will run it's battery dead if I close the screen and throw it into my back pack. It seems to just stay fully on and runs it's self to death. also it will lock up some times if I close the screen and come back to it 10 or 20 minutes later. It also won't retain volume settings when I reboot, as well as screen brightness. and just a couple of other things that I can't quite put my finger on, but just seem amiss. like I said, Essentially my netbook thinks it is a desktop, how can I fix this? ~N

  Read the article

• Localhost stop resolving/serving local site after a few clicks IIS 7.5

  - by Jo-Pierre

  previously I have searched tried to find the answer from a previous question, however Im not sure it was resolved. I could comment on the question to find more, so decided to post a new question. Previous question found (http://serverfault.com/questions/314333/localhost-stop-resolving-after-a-few-minutes-iis-7-5) So I set up a new website on Windows 7 IIS 7.5 ... I give it a host header and in the hosts file I add the entry for 127.0.0.1 and browse the site. After about the second or third time of trying to click around on the local site, it starts hanging ... just seems to be looking like its trying to load, but just eventually comes back in Firefox with "The connection was reset" (takes about 30-50 secs before this happens). I then used a program like CurrPorts, to view the ports that are listening, and for the initial request it all seems good. Now after the site is hanging, I dont see the hit coming through anymore. Its as if the browser loses touch with IIS or something. If I open a different browser, works fine for about 2 clicks or so, then same problem. Anyone know what could be causing this? Or how to resolve?

  Read the article

• How to configure apache to basic authentication or allow when ntlm while proxying?

  - by trotzim

  Here is my study case: browser --- apache proxy --- ISA server --- internet The ISA server requires an authentication. The issue is to allow HTTPS through the two proxies. A configuration that works with HTTP is something like this: (yes, I don't want to use ProxyPass but ProxyRequests) <virtualhost *:8080> ... SetEnv auth-proxy-chain on ... ProxyRequests On ProxyRemote * http://isaproxy:80 ... <proxy *> AuthName "ISA server auth" AuthType Basic [here a module to authenticate] require valid-user Allow from all </proxy> ... </virtualhost> The user can authenticate on the apache proxy then the authentication chain is sent to the ISA server that allows the HTTP trafic. But, while the browser switchs to HTTPS, the ISA server "speaks" NTLM and breaks the authentication on the apache proxy. If I try to use the SSPI module (ntlm) with something like this: blablabla <proxy *> AuthName "ISA server auth" AuthType ntlm [ SSPI stuff ] Require valid-user Allow from all </proxy> The apache server reject the authentication (or the ISA server I don't really know). I use wireshark to look at the nominal process while using directly the ISA server as proxy. The first auth-chain is a BASIC type then it switchs to NTLM (and the challenge continues with NTLM). How should I configure apache that it transfers the NTLM authentication to the ISA proxy without checking it(*)? Or to rewrite headers to force BASIC authentication? (*) It seems not to be as easy as it seems...

  Read the article

• Uploading to another domain gives HTTP code 405

  - by dragon112

  I'm trying to upload a file (which can be quite large) from the website of one server to the backend of another server using plupload. Lets say: domain 1 = http://www.websitedomain.com/uploadform domain 2 = http://www.backenddomain.com/uploadhandler Trying to upload i send the following: OPTIONS /main/uploadnetwork.php HTTP/1.1 Host: backenddomain.com Connection: keep-alive Access-Control-Request-Method: POST Origin: http://www.websitedomain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Access-Control-Request-Headers: origin, content-type Accept: */* Referer: http://www.websitedomain.com/uploadform Accept-Encoding: gzip,deflate,sdch Accept-Language: nl-NL,nl;q=0.8,en-US;q=0.6,en;q=0.4 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 DNT: 1 But when I try to start the upload the server returns the following: HTTP/1.1 405 Method Not Allowed Allow: GET, HEAD, OPTIONS, TRACE Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET X-Powered-By-Plesk: PleskWin Date: Mon, 01 Oct 2012 12:41:57 GMT Content-Length: 999 After doing some research I found out that a browser does this to check if the server will accept the intended message. It looks like my server doesn't feel like accepting a simple POST call even tho i use post all the time. The Google Chrome console gives the following error: XMLHttpRequest cannot load http://www.backenddomain.com/uploadhandler. Origin http://www.websitedomain.com is not allowed by Access-Control-Allow-Origin. Does anyone know how to stop the browser from checking or how i can tell my server to just accept the POST?

  Read the article

• Why does lighttpd keep static files in cache, even when modified on disk ?

  - by Pixelastic

  I am using lighttpd to serve static files. I have a bunch of images in a dir that I regularly update. This will change the file content (and filesize) as well as the modification date, but not their filename. When I access the files through http, the updates are not taken into account and lighty serves the old file. I can manually rename the file to something different, then lighttpd will return a 404 error, and if I rename my file back, I will get the correct updated version. Seems like lightty is using some kind of cache mechanism of its own (which is fine) to return static files. Unfortunatly, it seems that this mechanism doesn't update itself when files are modified. I checked through Wireshark, and my browser is really doing a request to the file, this is not a browser caching issue. It returns a 200 OK when requesting it from an empty cache, and a 304 Not Modified otherwise, as expected. But the file is returned with a wrong Last-Modified header that do not reflect the real last modification date. Maybe there is some config directive that I am not aware of ? I would like the files returned by lighty to reflect the changes made on disk directly, or at least being able to invalidate its cache.

  Read the article

• OpenOffice Vs Microsoft Office 2007/2010

  - by Moody Tech

  I have been asked to summarise the pros and cons in connection with the choices between Microsoft Office Vs OpenOffice. I have a broad idea of what needs to be said. However I would like to open a discussion here and have a single place to go to when the time comes to give the summary to management. There are obvious points of contention: For me the lack of compliance with Group Policy is a major concern [Default save location/visibility of C:/Visibility of files and folders on the HDD] However I am sure that functionality and compatibility will be the prime mover. We are looking at making major savings by reducing our commitment to Microsoft licensing. So what are your experiences? What happens when there are no direct equivalents? [Word has a close match in OpenOffice, but a database solution match is not as close, neither is an Outlook [connecting to Exchange Server and downloading all calendars, shared calendars, scheduled events, for Exchange will still exist after the move to OpenSource solutions] In summary then: What do you see as: The benefits of this plan? How do you see the problems being manifest? Discuss.... Many thanks.

  Read the article

• How to avoid en.voyages-sncf.com redirecting to uk.voyages-sncf.com?

  - by Mark Smith

  OK, so en.voyages-sncf.com is French Railways' English language website with full functionality for train booking in France - it sells iDTGV, offers seating options etc. uk.voyages-sncf.com is their UK subsidiary, with reduced functionality, no seat options, no iDTGV etc. Previously, I have been able to select 'Other countries (EUR)' top right and go from the uk version to the en version, or just type in the direct url 'en.voyages-sncf.com and go there. Now, they seem to have implemented an automatic redirect so whenever I enter 'en.voyages-sncf.com' on my UK-based PC or indeed try to select 'Other countries (EUR)' it automatically bumps me to uk.voyages-sncf.com, which I don't want. I can't get onto en.voyages-sncf at all. So, short of using a heavyweight solution like using a non-UK proxy server or downloading the TOR browser, is there any simple solution? Like telling my browser to go to en.voyages-sncf, go directly to en.voyages-sncf and no other site, do not pass go, do not collect £200, do not go anywhere else, ignore all redirects and do what you're told by ME, not by those Machiavellian so-and-sos?

  Read the article

• Removing HttpModule for specific path in ASP.NET / IIS 7 application?

  - by soccerdad

  Most succinctly, my question is whether an ASP.NET 4.0 app running under IIS 7 integrated mode should be able to honor this portion of my Web.config file: <location path="auth/windows"> <system.webServer> <modules> <remove name="FormsAuthentication"/> </modules> </system.webServer> </location> I'm experimenting with mixed mode authentication (Windows and Forms). Using IIS Manager, I've disabled Anonymous authentication to auth/windows/winauth.aspx, which is within the location path above. I have Failed Request Tracing set up to trace various HTTP status codes, including 302s. When I request the winauth.aspx page, a 302 HTTP status code is returned. If I look at the request trace, I can see that a 401 (unauthorized) was originally generated by the AnonymousAuthenticationModule. However, the FormsAuthenticationModule converts that to a 302, which is what the browser sees. So it seems as though my attempt to remove that module from the pipeline for pages in that path isn't working. But I'm not seeing any complaints anywhere (event viewer, yellow pages of death, etc.) that would indicate it's an invalid configuration. I want the 401 returned to the browser, which presumably would include an appropriate WWW-Authenticate header. A few other points: a) I do have <authentication mode="Forms"> in my Web.config, and that is what the 302 redirects to; b) I got the "name" of the module I'm trying to remove from the inetserv\config\applicationHost.config file; c) I have this element in my Web.config file: <modules runAllManagedModulesForAllRequests="false">; d) I tried a <location> element for the path in which I set the authentication mode to "None", but that gave a yellow exception page that the property can't be set below the application level. Anyone had any luck removing modules in this fashion?

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• Does image block (firefox addon) save internet bandwidth usage?

  - by dkjain

  Does image block save internet bandwidth usage. I have a data capped plan from my ISP ( 5GB at 2mbps and thereafter 256 kpbs / pm). I doubt if the addon or other similar addon actually saves bandwidht. Here is my point of view, pls correct if that is wrong. When a request is sent to the server, the server sends out whatever page it's requested to serve with all its text and images etc. So essentially my ISP has made his pipe available for the data to reach me thus he would count those bytes under my data plan. When the data arrives it's all first stored to my browser cache (folder) area which means all the data has actually been received by me/computer using my ISP's pipe. The browser then fetches those data from the cache and displays it. By hitting the stop button or blocking images via ur addon I am just choosing not to display the data which would remain in the cache or eventually be discarded if still on the network pipe after a timeout limit. The point is the data request have been completed by the ISP and so the data would be metered and thus using addon such as image block or hitting stop button while page is loading does not in any way save internet bandwidth. Your comments plz....... Regards dk.

  Read the article

• Prevent 'Run-time error '7' out of memory' error in Excel when using macro

  - by MasterJedi

  I keep getting this error whenever I run a macro in my excel file. Is there any way I can prevent this? My code is below. Debugging highlights the following line as the issue: ActiveSheet.Shapes.SelectAll My macro: Private Sub Save() Dim sh As Worksheet ActiveWorkbook.Sheets("Report").Copy 'Create new workbook with Sheets("Report"(2)) as only sheet. Set sh = ActiveWorkbook.Sheets(1) 'Set the new sheet to a variable. New workbook is now active workbook. sh.Name = sh.Range("B9") & "_" & Format(Date, "mmyyyy") 'Rename the new sheet to B9 value + date. With sh.UsedRange.Cells .Value = .Value 'eliminate all formulas .Validation.Delete 'remove all validation .FormatConditions.Delete 'remove all conditional formatting ActiveSheet.Buttons.Delete ActiveSheet.Shapes.SelectAll Selection.Delete lrow = Range("I" & Rows.Count).End(xlUp).Row 'select rows from bottom up to last containing data in column I Rows(lrow + 1 & ":" & Rows.Count).Delete 'delete rows with no data in column I Application.ScreenUpdating = False .Range("A410:XFD1048576").Delete Shift:=xlUp 'delete all cells outwith report range Application.ScreenUpdating = True Dim counter Dim nameCount nameCount = ActiveWorkbook.Names.Count counter = nameCount Do While counter > 0 ActiveWorkbook.Names(counter).Delete counter = counter - 1 Loop 'remove named ranges from workbook End With ActiveWorkbook.SaveAs "\\Marko\Report\" & sh.Name & ".xlsx" 'Save new workbook using same name as new sheet. ActiveWorkbook.Close False 'Close the new workbook. MsgBox ("Export complete. Choose the next ADP in cell B9 and click 'Calculate'.") 'Display message box to inform user that report has been saved. End Sub Not sure how to make this more efficient or to prevent this error.

  Read the article

• How to make Microsoft JVM work on Windows 7?

  - by rics

  I am struggling with the following problem. I cannot install MS JVM 3810 properly on Windows 7. When I start Interner Explorer 8 without starting any java 1.1 programs choosing Java custom settings under Internet options causes the crash of the browser. I have some Java 1.1 programs that work well in Internet Explorer 8 on Windows XP after the installation of MS JVM 3810. I know that it is not advised to use this old JVM but it is not a short-term option to port the programs in newer Java since it contains 3rd party components. Complete rewrite is a long-term plan. Strangely jview and appletviewer (jview /a) works from a console so the MS JVM 3810 is not completely busted just IE 8 does not like it. The problem with the appletviewer is that it cannot connect to the server even if both signed and unsigned content in Java custom settings have been set to Enable all. (Since Java custom settings was unreachable due to the crash the modifications - including My computer - were performed through the registry and pre-checked to behave correctly on Windows XP and Internet Explorer 8.) If jview was working then I could at least think of a workaround. Is there a way to configure MS JVM or jview properly on Windows 7? Another options would be: Checking Internet Explorer 9 Beta. Using virtualbox and Windows XP older IE in it. Delaying Windows 7 upgrade. ... Update Finally we have modified all the programs to work parallelly as applet and application as well. This way the programs can still be used from browser on older Windows versions. On Windows 7 the applications are started from the desktop. Installation to all user machine can easily be solved since they already have a large common application drive. The code update is fortunately only a few lines of modification: including a main method in the applet class. Furthermore instead of the starting html page a bat file is used to set the classpath before the startup with jview.

  Read the article

• Is it possible to theme Windows 7 like XP?

  - by LonelyPixel

  Everybody seems to mean the window frame colour and a set of desktop background pictures when they're talking about Windows 7 themes. Does anybody remember what themes used to be in Windows XP? You could actually alter the appearance of the window frame, how close buttons and menu popups looked, put a texture on the taskbar, all those funny things. Microsoft themselves have published a number of XP themes over time (Luna on XP, Royal on MCE2005, Zune later on). I don't say that most of those and the numerous third party XP themes were beautiful or even practical. But it was possible to create something nice. In Windows 7 (I suppress the existence of Windows Vista...) such a theme could well be used to increase readability to a level before Aero Glass again. I mean, you cannot really tell whether a Glass window is active or not. I've been tweaking the colours and transparency levels a lot recently but the only safe indicator is the close button: it's red when the window is active, it's colourless otherwise. Then there's the window title. It is always painted black, on however dark a background. Again, regardless of whether the window is active or not. Turning off Aero is not an option in Windows 7 anymore. Classic design looks just ugly there. It already wasn't exactly looking good on XP with the wide start menu. So, can we increase the readability of the Windows 7 UI with themes like in XP or didn't Microsoft learn a thing since the Windows 7 Preview "Vista"?

  Read the article

• Long running php script hangs/terminates on IIS 7.5

  - by Rich

  I'm a bit of nube when it comes to configuring IIS 7.5 and Php so apologies if this is a silly question but I've been wrestling with this for over half the day and need some fresh input. I have a php application running on IIS 7.5 , php 5.4 running as fastcgi. The application works absolutley fine with the exception that long running php scripts seem to hang; no 500 error they simply seem never complete and return the results to the browser. I've written a simple test script below to eliminate the possibility of programming error in the main app : <?php /* test timeout */ /*set_time_limit(110);*/ echo "Testing time out in seconds\n"; for ($i = 0; $i < 175; $i++) { echo $i." -- "; if(sleep(1)!=0) { echo "sleep failed script terminating"; break; } } ?> If I run the script beyond 175 seconds it hangs. Below that it will return the results to the browser. Here are the time out parameters that I've set for php and fastcgi. I've also played around setting these really low in order to get various time out errors and have succeeded which brings me to the conclusion that there's another setting that I'm missing .. perhaps. fastcgi activity timeout=800 Idle Timeout = 900 request Timeout 800 Php max_execution_time=700 Any solutions or pointers in the right direction would be very ... very welcome. Thanks

  Read the article

• Server taking too long to respond error

  - by DCJones

  Hi, This is my first post on serverFault and my first entry in to web server configuration. The hardware and software. CPU: GenuineIntel, Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz OS: Linux 2.6.18-128.el5 Memory: 2Gb Background. I am running a small database (MySQL), around 1000 records with each record containing 44 fields. At the start of each day “00:01” the tables are cleared and populated with fresh data. The are 10 remote PCs all running Winodws XP and Firefox internet browser. All remote PC’s are connected to the internet using a min 4Gb broadband connection. Each remote PC runs a URL which displays a dynamic page of data which is refreshed every 20 seconds. This is a continual process 24 hours a day. I problem I am having is on odd occasions throughout the day the PC browser error with “Server taking too long to respond error”. What I am trying to find our is if I have the correct setting in the httpd.conf file on the server. Any help or advice anyone can provide would be very helpful. Best regards Dereck Server config file: httpd.conf ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 254 MaxRequestsPerChild 4000 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0

  Read the article

• Apache on CentOS 5.9 VM serves my optimized images corrupted (but my Mac doesn't)

  - by Robert K

  I'm using a Vagrant VM to mirror the client's environment as closely as I can. As part of our build process we do no optimization of assets early on; that comes as we're ready to take a site live. Needless to say, this issue is beginning to worry me as we need to take the site live very soon. I use ImageOptim to automate optimization of image assets, which runs a whole series of tools (Zopfli, PNGOUT, OptiPNG, AdvPNG, PNGCrush). I always set the optimizations to their maximum setting. After optimization, my PNGs start looking like this: What's weird is, if I serve the same file through my Mac's copy of Apache, not through Vagrant, the image loads fine. In fact, the only time it's ever corrupt like this is when the image is served from the Vagrant VM and its install of Drupal. All optimized JPEGs display only the first ~20% of the image. And PNGs, depending on the image, may show either a portion or the "progressive"-style corruption below. The browser itself makes no difference, the same browser will serve an uncorrupted image from my Mac's Apache instance and a corrupt image from the VM. When I disable all PNG optimizations except PNGCrush, and the removal of the PNG metadata, the image is served corrupted. I'm optimizing JPEG images with JPEGmini. The server is running CentOS 5.9, Apache 2.2.3-85, PHP 5.3.3, and Drupal 7. As best as I can tell the error lies somewhere within the VM, either with Apache or with (perhaps) the network stack. Seems like the tools that optimize the compression of the PNGs and JPEGs are what trigger this error. I've already determined that the .htaccess file isn't interfering with how the images load. What should I try to troubleshoot this?

  Read the article

• Java games applet not connecting to Yahoo

  - by Steve

  Hi. I am trying to play a Y! game which use a java applet. The applet displays the message: Alert. Unable to connect to server. One of four things could have caused this: 1) You are behind a firewall. 2) You are not connected to the internet. 3) The games server is down. 4) You have a stale page in your cache. I have added an exception to the Windows firewall for java.exe. I am obviously connected to the Internet okay. The games server is not down when I am at home. I doubt it is down when I am at work. I have never successfully loaded this page before, so I doubt I have a stale page in cache. Could it be the corporate firewall? Nothing else in my web browser has been blocked before. Maybe the java applet connects on a different port to the browser. What should I test?

  Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >