Search Results

Search found 14772 results on 591 pages for 'full trust'.

Page 287/591 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

  • Resize underlying partitions in mdadm RAID1

    - by kyork
    I have a home built NAS, and I need to slightly reconfigure some of my drive usage. I have an mdadm RAID1 composed of two 3TB drives. Each drive has one ext3 partition that uses the entire drive. I need to shrink the ext3 partition on both drives, and add a second 8GB or so ext3 partition to one, and swap partition of equal size to the other. I think I have the steps figured out, but wanted some confirmation. Resize the mdadm RAID resize2fs /dev/md0 [size] where size is a little larger than the currently used space on the drive Remove one of the drives from the RAID mdadm /dev/md0 --fail /dev/sda1 Resize the removed drive with parted Add the new partition to the drive with parted Restore the drive to the RAID mdadm -a /dev/md0 /dev/sda1 Repeat 2-5 for the other device Resize the RAID to use the full partition mdadm --grow /dev/md0 -z max Is there anything I've missed, or haven't considered?

    Read the article

  • Set-Cookie Headers getting stripped in ASP.NET HttpHandlers

    - by Rick Strahl
    Yikes, I ran into a real bummer of an edge case yesterday in one of my older low level handler implementations (for West Wind Web Connection in this case). Basically this handler is a connector for a backend Web framework that creates self contained HTTP output. An ASP.NET Handler captures the full output, and then shoves the result down the ASP.NET Response object pipeline writing out the content into the Response.OutputStream and seperately sending the HttpHeaders in the Response.Headers collection. The headers turned out to be the problem and specifically Http Cookies, which for some reason ended up getting stripped out in some scenarios. My handler works like this: Basically the HTTP response from the backend app would return a full set of HTTP headers plus the content. The ASP.NET handler would read the headers one at a time and then dump them out via Response.AppendHeader(). But I found that in some situations Set-Cookie headers sent along were simply stripped inside of the Http Handler. After a bunch of back and forth with some folks from Microsoft (thanks Damien and Levi!) I managed to pin this down to a very narrow edge scenario. It's easiest to demonstrate the problem with a simple example HttpHandler implementation. The following simulates the very much simplified output generation process that fails in my handler. Specifically I have a couple of headers including a Set-Cookie header and some output that gets written into the Response object.using System.Web; namespace wwThreads { public class Handler : IHttpHandler { /* NOTE: * * Run as a web.config set handler (see entry below) * * Best way is to look at the HTTP Headers in Fiddler * or Chrome/FireBug/IE tools and look for the * WWHTREADSID cookie in the outgoing Response headers * ( If the cookie is not there you see the problem! ) */ public void ProcessRequest(HttpContext context) { HttpRequest request = context.Request; HttpResponse response = context.Response; // If ClearHeaders is used Set-Cookie header gets removed! // if commented header is sent... response.ClearHeaders(); response.ClearContent(); // Demonstrate that other headers make it response.AppendHeader("RequestId", "asdasdasd"); // This cookie gets removed when ClearHeaders above is called // When ClearHEaders is omitted above the cookie renders response.AppendHeader("Set-Cookie", "WWTHREADSID=ThisIsThEValue; path=/"); // *** This always works, even when explicit // Set-Cookie above fails and ClearHeaders is called //response.Cookies.Add(new HttpCookie("WWTHREADSID", "ThisIsTheValue")); response.Write(@"Output was created.<hr/> Check output with Fiddler or HTTP Proxy to see whether cookie was sent."); } public bool IsReusable { get { return false; } } } } In order to see the problem behavior this code has to be inside of an HttpHandler, and specifically in a handler defined in web.config with: <add name=".ck_handler" path="handler.ck" verb="*" type="wwThreads.Handler" preCondition="integratedMode" /> Note: Oddly enough this problem manifests only when configured through web.config, not in an ASHX handler, nor if you paste that same code into an ASPX page or MVC controller. What's the problem exactly? The code above simulates the more complex code in my live handler that picks up the HTTP response from the backend application and then peels out the headers and sends them one at a time via Response.AppendHeader. One of the headers in my app can be one or more Set-Cookie. I found that the Set-Cookie headers were not making it into the Response headers output. Here's the Chrome Http Inspector trace: Notice, no Set-Cookie header in the Response headers! Now, running the very same request after removing the call to Response.ClearHeaders() command, the cookie header shows up just fine: As you might expect it took a while to track this down. At first I thought my backend was not sending the headers but after closer checks I found that indeed the headers were set in the backend HTTP response, and they were indeed getting set via Response.AppendHeader() in the handler code. Yet, no cookie in the output. In the simulated example the problem is this line:response.AppendHeader("Set-Cookie", "WWTHREADSID=ThisIsThEValue; path=/"); which in my live code is more dynamic ( ie. AppendHeader(token[0],token[1[]) )as it parses through the headers. Bizzaro Land: Response.ClearHeaders() causes Cookie to get stripped Now, here is where it really gets bizarre: The problem occurs only if: Response.ClearHeaders() was called before headers are added It only occurs in Http Handlers declared in web.config Clearly this is an edge of an edge case but of course - knowing my relationship with Mr. Murphy - I ended up running smack into this problem. So in the code above if you remove the call to ClearHeaders(), the cookie gets set!  Add it back in and the cookie is not there. If I run the above code in an ASHX handler it works. If I paste the same code (with a Response.End()) into an ASPX page, or MVC controller it all works. Only in the HttpHandler configured through Web.config does it fail! Cue the Twilight Zone Music. Workarounds As is often the case the fix for this once you know the problem is not too difficult. The difficulty lies in tracking inconsistencies like this down. Luckily there are a few simple workarounds for the Cookie issue. Don't use AppendHeader for Cookies The easiest and obvious solution to this problem is simply not use Response.AppendHeader() to set Cookies. Duh! Under normal circumstances in application level code there's rarely a reason to write out a cookie like this:response.AppendHeader("Set-Cookie", "WWTHREADSID=ThisIsThEValue; path=/"); but rather create the cookie using the Response.Cookies collection:response.Cookies.Add(new HttpCookie("WWTHREADSID", "ThisIsTheValue")); Unfortunately, in my case where I dynamically read headers from the original output and then dynamically  write header key value pairs back  programmatically into the Response.Headers collection, I actually don't look at each header specifically so in my case the cookie is just another header. My first thought was to simply trap for the Set-Cookie header and then parse out the cookie and create a Cookie object instead. But given that cookies can have a lot of different options this is not exactly trivial, plus I don't really want to fuck around with cookie values which can be notoriously brittle. Don't use Response.ClearHeaders() The real mystery in all this is why calling Response.ClearHeaders() prevents a cookie value later written with Response.AppendHeader() to fail. I fired up Reflector and took a quick look at System.Web and HttpResponse.ClearHeaders. There's all sorts of resetting going on but nothing that seems to indicate that headers should be removed later on in the request. The code in ClearHeaders() does access the HttpWorkerRequest, which is the low level interface directly into IIS, and so I suspect it's actually IIS that's stripping the headers and not ASP.NET, but it's hard to know. Somebody from Microsoft and the IIS team would have to comment on that. In my application it's probably safe to simply skip ClearHeaders() in my handler. The ClearHeaders/ClearContent was mainly for safety but after reviewing my code there really should never be a reason that headers would be set prior to this method firing. However, if for whatever reason headers do need to be cleared, it's easy enough to manually clear the headers out:private void RemoveHeaders(HttpResponse response) { List<string> headers = new List<string>(); foreach (string header in response.Headers) { headers.Add(header); } foreach (string header in headers) { response.Headers.Remove(header); } response.Cookies.Clear(); } Now I can replace the call the Response.ClearHeaders() and I don't get the funky side-effects from Response.ClearHeaders(). Summary I realize this is a total edge case as this occurs only in HttpHandlers that are manually configured. It looks like you'll never run into this in any of the higher level ASP.NET frameworks or even in ASHX handlers - only web.config defined handlers - which is really, really odd. After all those frameworks use the same underlying ASP.NET architecture. Hopefully somebody from Microsoft has an idea what crazy dependency was triggered here to make this fail. IAC, there are workarounds to this should you run into it, although I bet when you do run into it, it'll likely take a bit of time to find the problem or even this post in a search because it's not easily to correlate the problem to the solution. It's quite possible that more than cookies are affected by this behavior. Searching for a solution I read a few other accounts where headers like Referer were mysteriously disappearing, and it's possible that something similar is happening in those cases. Again, extreme edge case, but I'm writing this up here as documentation for myself and possibly some others that might have run into this. © Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET   IIS7   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Where can I find video resources of people programming?

    - by Corey
    This might be a strange question. I'm looking for videos of people actively coding something while explaining it. However, I don't want is a beginner video that delves into what variables and objects are. Nick Gravelyn's tile engine tutorial is a great example of what I'm looking for. (He actually used to host the full, unbroken video files in his site's archive, but I guess he took them down...) I tend to learn best by "action" examples; it's difficult for me to learn by reading through documentation and text tutorials, but if I see somebody actively doing a task, I can immediately register it and apply it myself. I'm hard-of-hearing, so I would really prefer that if the video has a lot of talking, it have captioning or subtitling of some sort, or at the very least, a transcript. The tile engine videos did not have captions, but the code he was writing was very self-documenting, so I understood it for the most part. I've gone through most of the relevant GoogleDevelopers and GoogleTechTalks videos on Youtube, so those need not apply. Are there any resources out there, or even websites dedicated to this kind of thing?

    Read the article

  • Modular programming is the method of programming small task or programs

    Modular programming is the method of programming small task or sub-programs that can be arranged in multiple variations to perform desired results. This methodology is great for preventing errors due to the fact that each task executes a specific process and can be debugged individually or within a larger program when combined with other tasks or sub programs. C# is a great example of how to implement modular programming because it allows for functions, methods, classes and objects to be use to create smaller sub programs. A program can be built from smaller pieces of code which saves development time and reduces the chance of errors because it is easier to test a small class or function for a simple solutions compared to testing a full program which has layers and layers of small programs working together.Yes, it is possible to write the same program using modular and non modular programming, but it is not recommend it. When you deal with non modular programs, they tend to contain a lot of spaghetti code which can be a pain to develop and not to mention debug especially if you did not write the code. In addition, in my experience they seem to have a lot more hidden bugs which waste debugging and development time. Modular programming methodology in comparision to non-mondular should be used when ever possible due to the use of small components. These small components allow business logic to be reused and is easier to maintain. From the user’s view point, they cannot really tell if the code is modular or not with today’s computers.

    Read the article

  • What is wrong in my DKIM setup? I'm getting all fails

    - by djechelon
    I own a domain name I have implemented SPF and DKIM to avoid my mails being junked. I have also upgraded to DMARC in monitor mode. Since I received a few failure reports recently I wanted to investigate more. I have only one server sending outbound emails, running postfix + dkimproxy. I trust that dkimproxy has no major software bugs resulting in bad messages. I have tested ReturnPath's automated DKIM test and this is the part related to DKIM/DomainKeys DKIM Results ============ Result = failed: invalid key for signature: Syntax error in tag: \"v Domain = domain.org Selector = sel DNS Record(s) = sel._domainkey.domain.org TXT "v=1; p=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; t=s" Public Key Length = 4096 DomainKeys Results ================== Domain = domain.org Selector = sel DNS Record(s) = sel._domainkey.domain.org TXT "v=1; p=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; t=s" The mail displays an anonymised DNS record with genuine public key. It reports an error in tag v. A few hours ago I noticed my v tag was v=DKIM1 instead of v=1 as specified in RFC. I thought it was an error made by me during the initial setup months ago and fixed to v=1, but anyway I received one DMARC success from Google. Let me explain better: I enforced DMARC a couple of days ago. On 4/16 morning I got a mail from Google telling me that DMARC fully passes, then since 4/17 I get all failures. Then I discovered the v=DKIM1 tag and replaced with v=1 without success I have not modified my DNS records before that. So, keeping in topic with the question, why does ReturnPath refuse my DKIM DNS record? Is something wrong in my DKIM implementation at DNS level? [Add] I have just tried port25.com's tester but at least DKIM passes ---------------------------------------------------------- DomainKeys check details: ---------------------------------------------------------- Result: permerror (DK_STAT_BADKEY: Unusable key, public if verifying, private if signing.) ID(s) verified: header.From=########### DNS record(s): sel._domainkey.domain.org. 1800 IN TXT ""v=1; p=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; t=s"" ---------------------------------------------------------- DKIM check details: ---------------------------------------------------------- Result: pass (matches From: #########) ID(s) verified: header.d=domain.org Canonicalized Headers: message-id:<[email protected]>'0D''0A' date:Thu,'20'18'20'Apr'20'2013'20'11:40:26'20'+0200'0D''0A' from:#############'0D''0A' mime-version:1.0'0D''0A' to:[email protected]'0D''0A' subject:Test'0D''0A' content-type:text/plain;'20'charset=ISO-8859-15;'20'format=flowed'0D''0A' content-transfer-encoding:7bit'0D''0A' dkim-signature:v=1;'20'a=rsa-sha1;'20'c=relaxed;'20'd=domain.org;'20'h='20'message-id:date:from:mime-version:to:subject:content-type'20':content-transfer-encoding;'20's=dom;'20'bh=uoq1oCgLlTqpdDX/iUbLy7J1Wi'20'c=;'20'b= Canonicalized Body: '0D''0A' DNS record(s): sel._domainkey.domain.org. 1800 IN TXT ""v=1; p=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; t=s"" Public key used for verification: sel._domainkey.domain.org (4096 bits)

    Read the article

  • Corrupt file indicative of corrupt hard drive?

    - by Elipsicon
    I have noticed that two files on my (almost full) 2 TB hard drive have been corrupted. One file has 20 kB (!) corrupted, i.e. consecutive 20 kB have changed, even though the modification date of the file hasn't changed and I haven't worked with this file for over a year. This tells me that something "below" the file system level has messed with the data and the only thing I can think of is hardware failure, most likely hard disk failure. I've tested my RAM already and it works flawlessly. I'm using ext4 on Linux, if that is of any help. Is this normal? Is it time to change my hard drive disk before something worse happens? What can I do to prevent that from happening in the future? Is there some built-in feature of, or extension to ext4 that includes additional error correcting code and/or watches files for changes that haven't been caused by the OS?

    Read the article

  • Understanding Windows 8 Recovery options

    - by stuffe
    Background: I am preparing a PC that I am sending to a relative abroad, who has little or no internet access, and next to no sensible options for getting IT support should anything go wrong. As such I am trying to provide a full set of recovery options such that they are able to reinstall the OS with minimum fuss or assistance if required. The PC is a brand new Acer laptop that came with Windows 7 pre-installed (and an associated recovery partition) and a free upgrade to Windows 8. I have installed Windows 8 from scratch performing a format and clean install from media I burned from the official download. The existing Windows 7 recovery partition is still there, and I can still boot from it. I have created recovery DVDs of that in case it is ever lost. Here are my recovery options so far. I can perform a factory reset of Win 7 via the recovery partition I can perform a factory reset of Win 7 via burned recovery DVDs I can re-install Windows 8 cleanly from a DVD All of these are useful, but not what I want, because the first 2 methods use Win 7, and still fill the machine with crapware, and the latter doesn't provide for any post-install customisation and software installation. So, I am looking to see what other options are available to perform a Windows 8 recovery that will be more than a simple install. I am aware that Win8 comes with some useful refresh tools: Refresh your PC - Re-install Win 8 over the top of your existing installation, recovering from any Windows corruption etc. I can run this from my current install, although it says some files are missing that will be provided by me install or recovery media, which seems to be code for stick your install DVD in, and it starts after I do that - unfortunately for this particular laptop you need to specify a particular WIFI driver or the install bombs out part way through with IRQL errors, and this refresh method skips the part where you can load a driver, so it's no use to me. I think I can fix this by creating a custom recovery image using the recimg.exe command but it takes hours to complete so I haven't tried it yet. Reset your PC - Perform a full install and lose all your files. Again it needs my Install media inserting before it will do anything, but then it provides an error (will include later when I recreate it...) Now, these recovery options look useful (in principal, although both are fail for me) but they rely on having a working system to access the tools, which leads me to the last option, of making a Recovery USB drive. I have made a recovery drive, and it should perform loads of useful things, including copying my WIN7 recovery partition to the drive, providing the above refresh and reset options, providing other troubleshooting options and also the ability to restore from a custom image, only none of them seem to work for me. Creating the Recovery Drive - the option to include my recovery partition is greyed out. The partition exists and works fine, why will it not copy it? Refresh - I imagine this would have the same issues as I described before, but this is moot because when I try it says that the "drive where Windows is installed is locked, please unlock the drive and try again" with no info on what that means and how to do it. Restore - Again, probably pointless as I can just use the DVD, but it also errors: "unable to reset your PC. A required drive partition is missing" System Restore - should let me roll back a bad driver etc as per normal in Windows, only it simply says "To use system restore you must specify which windows installation to restore. Restart this computer, select an operating system, and select system restore" ?!?! System Image Recovery - this seems to be offering to restore from a Windows system image, but this is deprecated in Windows 8, although you can still make one if you use the Windows 7 Backup tools, however the resultant file is too large to put on the USB stick as it's FAT formatted, and would be a massive stack of DVDs anyway. So useless. It would be nice it it would work with the custom recovery image you can use with the refresh command, but there seems no option to do this. Automatic Repair - some diagnostics, which seem useless as it happily tells me it can't fix my problem, even though I have none. Command Prompt - yay, this works! What on earth do I want to use it for... Had any of the above worked, it might be useful, but as any form of install still requires you to have the DVD, and any form of custom recovery image also requires you to have either a massive stack of DVDs or an NTFS formatted backup device in addition to the recovery drive, it sort of ruins the point. It doesn't seem rocket science. I want to create a bootable USB drive that I can refresh Windows over an existing install with, perform a clean reinstall to a bare system, or recovery a customised image with existing apps installed. If anyone can point me in a direction that allows me to make a single recovery drive do these all these things, I would appreciate it. I have a 32Gb USB3 thumb drive that I bought for this very purpose, but it's seems to be fighting to let me do anything useful. At this rate I will be making a DriveImageXML recovery stick and dumping the OS with that, which I know works, but isn't so elegant as using the proper tools..

    Read the article

  • Email setup on dedicated servers

    - by zaf
    Am thinking seriously of renting a dedicated server. Now I know how to setup apache and the underlying scripting engines and databases but I'm a bit clueless with how the emails would work. Currently, I'm on a shared hosting account and I get a fancy gui which allows me to nicely add a domain, setup nameservers and then the emails for all domain names with either simple forwarding or the full account which also has a webmail app behind it. What options do I have? Are there non complicated ways to have the same email setup experience? Or are there reliable external providers I could use? My past experiences with sendmail/postfix have always been fuzzy - not exactly knowing whats happening behind the scenes.

    Read the article

  • Trace flags - TF 1117

    - by Damian
    I had a session about trace flags this year on the SQL Day 2014 conference that was held in Wroclaw at the end of April. The session topic is important to most of DBA's and the reason I did it was that I sometimes forget about various trace flags :). So I decided to prepare a presentation but I think it is a good idea to write posts about trace flags, too. Let's start then - today I will describe the TF 1117. I assume that we all know how to setup a TF using starting parameters or registry or in the session or on the query level. I will always write if a trace flag is local or global to make sure we know how to use it. Why do we need this trace flag? Let’s create a test database first. This is quite ordinary database as it has two data files (4 MB each) and a log file that has 1MB. The data files are able to expand by 1 MB and the log file grows by 10%: USE [master] GO CREATE DATABASE [TF1117]  ON  PRIMARY ( NAME = N'TF1117',      FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117.mdf' ,      SIZE = 4096KB ,      MAXSIZE = UNLIMITED,      FILEGROWTH = 1024KB ), ( NAME = N'TF1117_1',      FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117_1.ndf' ,      SIZE = 4096KB ,      MAXSIZE = UNLIMITED,      FILEGROWTH = 1024KB )  LOG ON ( NAME = N'TF1117_log',      FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117_log.ldf' ,      SIZE = 1024KB ,      MAXSIZE = 2048GB ,      FILEGROWTH = 10% ) GO Without the TF 1117 turned on the data files don’t grow all up at once. When a first file is full the SQL Server expands it but the other file is not expanded until is full. Why is that so important? The SQL Server proportional fill algorithm will direct new extent allocations to the file with the most available space so new extents will be written to the file that was just expanded. When the TF 1117 is enabled it will cause all files to auto grow by their specified increment. That means all files will have the same percent of free space so we still have the benefit of evenly distributed IO. The TF 1117 is global flag so it affects all databases on the instance. Of course if a filegroup contains only one file the TF does not have any effect on it. Now let’s do a simple test. First let’s create a table in which every row will fit to a single page: The table definition is pretty simple as it has two integer columns and one character column of fixed size 8000 bytes: create table TF1117Tab (      col1 int,      col2 int,      col3 char (8000) ) go Now I load some data to the table to make sure that one of the data file must grow: declare @i int select @i = 1 while (@i < 800) begin       insert into TF1117Tab  values (@i, @i+1000, 'hello')        select @i= @i + 1 end I can check the actual file size in the sys.database_files DMV: SELECT name, (size*8)/1024 'Size in MB' FROM sys.database_files  GO   As you can see only the first data file was  expanded and the other has still the initial size:   name                  Size in MB --------------------- ----------- TF1117                5 TF1117_log            1 TF1117_1              4 There is also other methods of looking at the events of file autogrows. One possibility is to create an Extended Events session and the other is to look into the default trace file:     DECLARE @path NVARCHAR(260); SELECT    @path = REVERSE(SUBSTRING(REVERSE([path]),          CHARINDEX('\', REVERSE([path])), 260)) + N'log.trc' FROM    sys.traces WHERE   is_default = 1; SELECT    DatabaseName,                 [FileName],                 SPID,                 Duration,                 StartTime,                 EndTime,                 FileType =                         CASE EventClass                                     WHEN 92 THEN 'Data'                                    WHEN 93 THEN 'Log'             END FROM sys.fn_trace_gettable(@path, DEFAULT) WHERE   EventClass IN (92,93) AND StartTime >'2014-07-12' AND DatabaseName = N'TF1117' ORDER BY   StartTime DESC;   After running the query I can see the file was expanded and how long did the process take which might be useful from the performance perspective.    Now it’s time to turn on the flag 1117. DBCC TRACEON(1117)   I dropped the database and recreated it once again. Then I ran the queries and observed the results. After loading the records I see that both files were evenly expanded: name                  Size in MB --------------------- ----------- TF1117                5 TF1117_log            1 TF1117_1              5 I found also information in the default trace. The query returned three rows. The last one is connected to my first experiment when the TF was turned off.  The two rows shows that first file was expanded by 1MB and right after that operation the second file was expanded, too. This is what is this TF all about J  

    Read the article

  • Files are piling up in /usr/src/. How can I stop this?

    - by Bogdanovist
    I have been having many serious system issues over the past few weeks and have been scratching my head as to why. I've now worked out that this problem is having no inodes left on the root partition $ df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda6 732960 724565 8395 99% / udev 125179 518 124661 1% /dev tmpfs 127001 464 126537 1% /run none 127001 4 126997 1% /run/lock none 127001 8 126993 1% /run/shm /dev/sda7 5234688 144639 5090049 3% /home What is the cause? I've found that 400K of those are in use in /usr/src $ ls /usr/src linux-headers-3.2.0-25-generic linux-headers-3.2.0-33 linux-headers-3.2.0-25-generic-pae linux-headers-3.2.0-33-generic linux-headers-3.2.0-26 linux-headers-3.2.0-33-generic-pae linux-headers-3.2.0-26-generic linux-headers-3.2.0-35 linux-headers-3.2.0-26-generic-pae linux-headers-3.2.0-35-generic linux-headers-3.2.0-27 linux-headers-3.2.0-35-generic-pae linux-headers-3.2.0-27-generic linux-headers-3.2.0-36 linux-headers-3.2.0-27-generic-pae linux-headers-3.2.0-36-generic linux-headers-3.2.0-29 linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-29-generic linux-headers-3.2.0-39 linux-headers-3.2.0-29-generic-pae linux-headers-3.2.0-39-generic linux-headers-3.2.0-30 linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-30-generic linux-headers-3.2.0-40 linux-headers-3.2.0-30-generic-pae linux-headers-3.2.0-40-generic linux-headers-3.2.0-31 linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-31-generic linux-headers-3.2.0-41 linux-headers-3.2.0-31-generic-pae linux-headers-3.2.0-41-generic linux-headers-3.2.0-32 linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-32-generic linux-headers-3.2.0-43 linux-headers-3.2.0-32-generic-pae Surely not all of these are actually needed? I've tried apt-get autoremove but it leaves them all be. I don't want to remove them manually, but this is crippling my machine. They also take up almost 2G of the 11G system partition that is getting full (80%) aside from the inode issue. How can I safely remove the headers that are not needed?

    Read the article

  • Why do digits in bash script names screw up path lookups?

    - by cannikin
    I've got a simple script that lists a bunch of EC2 servers and automates me connecting to them. This script lives at ~/bin/ec2 My PATH looks something like: /Users/rob/bin:/Users/rob:/usr/local/bin:/usr/local/sbin:/opt/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin Whenever I call ec2 I get: -bash: /Users/rob/ec2: No such file or directory Unless I give it the full path, then it'll work. If I rename the script to just ec then I can run it from anywhere like expected. Have digits in script names always been a problem like this? I'm on Mac OSX.

    Read the article

  • SharePoint Saturday Charlotte 2010 Recap, Slides and Photos

    - by Brian Jackett
    This past weekend I attended SharePoint Saturday Charlotte (SPSCLT) in Charlotte, North Carolina.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my fourth SharePoint Saturday attended and third I’ve spoken at.  The event was very well organized, attended, and a pleasure to be a part of along with many other great speakers.     At SharePoint Saturday Charlotte I had the opportunity to give two presentations.  First was “The Power of PowerShell + SharePoint 2007” and second was a new one “Managing SharePoint 2010 Farms with PowerShell.”  I want to thank everyone who attended either of my sessions and for all of the feedback given.  Below you will find links to my slides, demo scripts, and pictures taken throughout the event.  If anyone has any questions from the slides or scripts feel free to drop me a line.   Pictures SharePoint Saturday Charlotte Apr '10 Pictures on Facebook (recommend these with comments and tagging)   View Full Album   Slides, Scripts, and Rating Links SharePoint Saturday Charlotte Apr '10 Slides and Demo Scripts SpeakerRate: The Power of PowerShell + SharePoint 2007 SpeakerRate: Managing SharePoint 2010 Farms with PowerShell   Conclusion     Big thanks out to Brian Gough (@bkgough), Dan Lewis (@sharepointcomic) and all of the other organizers of this event.  Also a big thanks out to the other speakers and sponsors (too many to list) who made the event possible.  Lastly thanks to my Sogeti coworker Kelly Jones (@kellydjones) for picking me up from the airport and a ride back to Columbus.  I hope everyone that attended got something out of the event and will continue to grow the SharePoint community.  I’m on a break from conferences for a few weeks and then have 3 more back to back weekends in May, blog posts announcing those coming later.  Enjoy the slides, scripts, and pictures.         -Frog Out

    Read the article

  • SQLAuthority News – Download SQL Server 2008 R2 Upgrade Technical Reference Guide

    - by pinaldave
    I recently come across very interesting white paper written for Microsoft by Solid Quality Mentors. A successful upgrade to SQL Server 2008 R2 should be smooth and trouble-free. To do that smooth transition, you must plan sufficiently for the upgrade and match the complexity of your database application. Otherwise, you risk costly and stressful errors and upgrade problems. SQL Server 2008 R2 Upgrade Technical Reference Guide is one of the best and comprehensive reference guide I have seen on the subject of SQL Server 2008 R2 upgrade. There are so many various subjects discussed about upgrade which one would always wanted to see. You can find the link of why one has to upgrade to SQL Server 2008 R2 over here: Why upgrade to SQL Server 2008 R2. White paper to upgrade to SQL Server 2008 R2 Upgrade Guide. Here is the quick list of content of the white paper. 1. Upgrade Planning and Deployment 2. Management and Development Tools 3. Relational Databases 4. High Availability 5. Database Security 6. Full-Text Search 7. Service Broker 8. Transact-SQL Queries 9. Notification Services 10. SQL Server Express 11. Analysis Services 12. Data Mining 13. Integration Services 14. Reporting Services 15. Other Microsoft Applications and Platforms Appendix 1: Version and Edition Upgrade Paths Appendix 2: Upgrade Planning Deployment and Tasks Checklist This white paper is indeed huge with 490 pages and 151,956 words.As I said, this is one of the most comprehensive white paper ever published on the subject. Just reading this white paper one can learn a lot about SQL Server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • What resolution can the eeePC 1001HA/1101HA handle with an external monitor plugged in?

    - by Marco Demaio
    I would like to buy a new Eee PC 1001HA or 1101HA. I know the max display resolution is: 1024x600 for eeePC 1001 1366x768 for eeePC 1101 But what's the maximum resolution of the graphic board when connecting these two computers to an external LCD monitor? Let's say the external monitor supports a full HD resolution of 1920x1080. Are these eeePC graphic boards able to go up to such resolution? It's really incredible to me how such a useful piece of information is missing everywhere on every ASUS website. EeePCs are very well suited to be connected to external monitor, so I can't believe how difficult is to find out this information. I downloaded the manual, but it's not in there either. So I'm hoping somone has got one and knows the answer.

    Read the article

  • Switching website DNS with minimal downtime

    - by Gavin
    I need to change my domain's DNS, but here in Thailand the ISPs don't follow any standards for renewing their cache of records, so it can take the full two days. I have a new website with about 1,000 members currently who are sending messages and uploading photos. I don't want both sites on the old and new server running at the same time because then I'd have to manually merge the database and transfer uploaded photos. It would be a huge pain. Both servers also a unique URL from my host, e.g. website12345.hostingcompany.com (old host) and website67890.hostingcompany.com (new host). I don't have much experience with this, but I think what I can do is on www.mysite.com, use .htaccess to do a masked redirect to the new server's URL (website67890.hostingcompany.com). Is it possible to do this and keep all URLs being masked? For example, www.mysite.com/profile/username will actually be loading website12345.hostingcompany.com/profile/username. From Google searches it sounds like this is possible, but I don't understand why this is possible due to security issues, since what's keeping people from masking their site to URLs like facebook.com? I could really use some advice here! Thanks!

    Read the article

  • Remote Desktop or Streaming Software/Services that Supports Gaming

    - by Griffin
    I've simply been amazed by the quality and speed of Onlive, as this technology has the potential of making hardware requirements irrelevant to the average user. However, at the moment Onlive is only for remotely controlling video games, and not desktops or other devices in general. I'm in pursuit of software or services that can accomplish this as well as Onlive does. I need: viewer (client) program portability (able to run on a USB stick) DirectX, OpenGL / full-screen game compatibility on the server side.** Gaming-acceptable color/scaling quality and responsiveness. I have a very powerful desktop at home and I want to be able to access this raw power from any other computer that I stick my USB into (in the same way Onlive gives gamers use of their powerful servers) What software/services has most of the above? NOTE: please specify what features your suggestion doesn't have.

    Read the article

  • I just ordered 70/10 internet service, and need a new router I think?

    - by data_jepp
    Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

    Read the article

  • Get Ready to Meet Oracle GoldenGate 11gR2 at OpenWorld

    - by Irem Radzik
      Oracle GoldenGate 11g Release 2 could not come at a better time. At Oracle OpenWorld 2012 we have a great set of sessions and demos for Oracle GoldenGate users: deep dives into the new features of Oracle GoldenGate 11gR2, as well as great customer presentations from Comcast, Bank of America, Turk Telekom, Ticketmaster, St. Jude Medical Center, and more. Here are 3 must-attend sessions for GoldenGate users and for those who want to get to know GoldenGate’s capabilities: Real-World Zero-Downtime Operations with Oracle GoldenGate: Customer Panel Oct 1st 1:45 PM Moscone West – 3005 Oracle GoldenGate 11g Release 2 New Features Oct 1st 3:15 PM Moscone West – 3005 Real-World Operational Reporting with Oracle GoldenGate: Customer Panel Oct 2nd 11:45 AM Moscone West - 3005 For a full list of GoldenGate and data integration sessions, please check out our Focus-On for Data Integration. Similar to last year, Hands-on-Labs will be available for those who want to experience the power of GoldenGate first hand. One of these instructor-led sessions provides “Deep Dive into Oracle GoldenGate” will be held on Thursday Oct 4th 11:15am at Marriott Marquis - Salon ½. I expect the spots will fill out fast in this session. Oracle GoldenGate Demos will be running Monday through Wednesday in Moscone South in both Oracle Database and Oracle Fusion Middleware sections of the Oracle demo grounds. We will be showcasing: Monitoring Oracle GoldenGate for End-to-End Visibility Oracle GoldenGate 11gR2 New Features Oracle GoldenGate 11gR2: Real-Time, Transactional Database Replication Oracle GoldenGate Veridata Oracle Maximum Availability Architecture If you are not able to attend OpenWorld, you should not miss this week’s live webcast introducing Oracle GoldenGate 11g Release 2. On Wednesday the webcast will present the new features of GoldenGate and attendees will have a long, live Q&A panel session with the PM team.  I also recommend checking out the resources for GoldenGate to download new white papers. The whole team is looking forward to sharing with you the latest and greatest features of GoldenGate at the launch webcast and at OpenWorld.

    Read the article

  • If using eMule, how to keep current downloading files while adding a hard drive?

    - by the searcher
    If there are still downloading files (ones that will need extra 2 week or unknown time because they are rare files) but need to use a new hard drive because no space is left in hard drive, then is there a way to use new hard drive while keeping existing downloads ongoing? That's because if we change the folder in eMule from G: to H:, then all existing downloads will disappear too... Update: I can move the completed files over to the new hard drive... but it is going to be a never ending task... (old hard drive gets full... move some... and repeat)

    Read the article

  • 10 Reasons Why Java is the Top Embedded Platform

    - by Roger Brinkley
    With the release of Oracle ME Embedded 3.2 and Oracle Java Embedded Suite, Java is now ready to fully move into the embedded developer space, what many have called the "Internet of Things". Here are 10 reasons why Java is the top embedded platform. 1. Decouples software development from hardware development cycle Development is typically split between both hardware and software in a traditional design flow . This leads to complicated co-design and requires prototype hardware to be built. This parallel and interdependent hardware / software design process typically leads to two or more re-development phases. With Embedded Java, all specific work is carried out in software, with the (processor) hardware implementation fully decoupled. This with eliminate or at least reduces the need for re-spins of software or hardware and the original development efforts can be carried forward directly into product development and validation. 2. Development and testing can be done (mostly) using standard desktop systems through emulation Because the software and hardware are decoupled it now becomes easier to test the software long before it reaches the hardware through hardware emulation. Emulation is the ability of a program in an electronic device to imitate another program or device. In the past Java tools like the Java ME SDK and the SunSPOTs Solarium provided developers with emulation for a complete set of mobile telelphones and SunSpots. This often included network interaction or in the case of SunSPOTs radio communication. What emulation does is speed up the development cycle by refining the software development process without the need of hardware. The software is fixed, redefined, and refactored without the timely expense of hardware testing. With tools like the Java ME 3.2 SDK, Embedded Java applications can be be quickly developed on Windows based platforms. In the end of course developers should do a full set of testing on the hardware as incompatibilities between emulators and hardware will exist, but the amount of time to do this should be significantly reduced. 3. Highly productive language, APIs, runtime, and tools mean quick time to market Charles Nutter probably said it best in twitter blog when he tweeted, "Every time I see a piece of C code I need to port, my heart dies a little. Then I port it to 1/4 as much Java, and feel better." The Java environment is a very complex combination of a Java Virtual Machine, the Java Language, and it's robust APIs. Combine that with the Java ME SDK for small devices or just Netbeans for the larger devices and you have a development environment where development time is reduced significantly meaning the product can be shipped sooner. Of course this is assuming that the engineers don't get slap happy adding new features given the extra time they'll have.  4. Create high-performance, portable, secure, robust, cross-platform applications easily The latest JIT compilers for the Oracle JVM approach the speed of C/C++ code, and in some memory allocation intensive circumstances, exceed it. And specifically for the embedded devices both ME Embedded and SE Embedded have been optimized for the smaller footprints.  In portability Java uses Bytecode to make the language platform independent. This creates a write once run anywhere environment that allows you to develop on one platform and execute on others and avoids a platform vendor lock in. For security, Java achieves protection by confining a Java program to a Java execution environment and not allowing it to access other parts of computer.  In variety of systems the program must execute reliably to be robust. Finally, Oracle Java ME Embedded is a cross-industry and cross-platform product optimized in release version 3.2 for chipsets based on the ARM architectures. Similarly Oracle Java SE Embedded works on a variety of ARM V5, V6, and V7, X86 and Power Architecture Linux. 5. Java isolates your apps from language and platform variations (e.g. C/C++, kernel, libc differences) This has been a key factor in Java from day one. Developers write to Java and don't have to worry about underlying differences in the platform variations. Those platform variations are being managed by the JVM. Gone are the C/C++ problems like memory corruptions, stack overflows, and other such bugs which are extremely difficult to isolate. Of course this doesn't imply that you won't be able to get away from native code completely. There could be some situations where you have to write native code in either assembler or C/C++. But those instances should be limited. 6. Most popular embedded processors supported allowing design flexibility Java SE Embedded is now available on ARM V5, V6, and V7 along with Linux on X86 and Power Architecture platforms. Java ME Embedded is available on system based on ARM architecture SOCs with low memory footprints and a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN). 7. Support for key embedded features (low footprint, power mgmt., low latency, etc) All embedded devices by there very nature are constrained in some way. Economics may dictate a device with a less RAM and ROM. The CPU needs can dictate a less powerful device. Power consumption is another major resource in some embedded devices as connecting to consistent power source not always desirable or possible. For others they have to constantly on. Often many of these systems are headless (in the embedded space it's almost always Halloween).  For memory resources ,Java ME Embedded can run in environment as low as 130KB RAM/350KB ROM for a minimal, customized configuration up to 700KB RAM/1500KB ROM for the full, standard configuration. Java SE Embedded is designed for environments starting at 32MB RAM/39MB  ROM. Key functionality of embedded devices such as auto-start and recovery, flexible networking are fully supported. And while Java SE Embedded has been optimized for mid-range to high-end embedded systems, Java ME Embedded is a Java runtime stack optimized for small embedded systems. It provides a robust and flexible application platform with dedicated embedded functionality for always-on, headless (no graphics/UI), and connected devices. 8. Leverage huge Java developer ecosystem (expertise, existing code) There are over 9 million developers in world that work on Java, and while not all of them work on embedded systems, their wealth of expertise in developing applications is immense. In short, getting a java developer to work on a embedded system is pretty easy, you probably have a java developer living in your subdivsion.  Then of course there is the wealth of existing code. The Java Embedded Community on Java.net is central gathering place for embedded Java developers. Conferences like Embedded Java @ JavaOne and the a variety of hardware vendor conferences like Freescale Technlogy Forums offer an excellent opportunity for those interested in embedded systems. 9. Easily create end-to-end solutions integrated with Java back-end services In the "Internet of Things" things aren't on an island doing an single task. For instance and embedded drink dispenser doesn't just dispense a beverage, but could collect money from a credit card and also send information about current sales. Similarly, an embedded house power monitoring system doesn't just manage the power usage in a house, but can also send that data back to the power company. In both cases it isn't about the individual thing, but monitoring a collection of  things. How much power did your block, subdivsion, area of town, town, county, state, nation, world use? How many Dr Peppers were purchased from thing1, thing2, thingN? The point is that all this information can be collected and transferred securely  (and believe me that is key issue that Java fully supports) to back end services for further analysis. And what better back in service exists than a Java back in service. It's interesting to note that on larger embedded platforms that support the Java Embedded Suite some of the analysis might be done on the embedded device itself as JES has a glassfish server and Java Database as part of the installation. The result is an end to end Java solution. 10. Solutions from constrained devices to server-class systems Just take a look at some of the embedded Java systems that have already been developed and you'll see a vast range of solutions. Livescribe pen, Kindle, each and every Blu-Ray player, Cisco's Advanced VOIP phone, KronosInTouch smart time clock, EnergyICT smart metering, EDF's automated meter management, Ricoh Printers, and Stanford's automated car  are just a few of the list of embedded Java implementation that continues to grow. Conclusion Now if your a Java Developer you probably look at some of the 10 reasons and say "duh", but for the embedded developers this is should be an eye opening list. And with the release of ME Embedded 3.2 and the Java Embedded Suite the embedded developers life is now a whole lot easier. For the Java developer your employment opportunities are about to increase. For both it's a great time to start developing Java for the "Internet of Things".

    Read the article

  • Configuring Backup Exec 2012 using USB hard drives as media

    - by SydxPages
    I have found some information on this but have not found the exact answers to these questions. Background I have installed backup exec 2012 (with agents for databases) I have configured a storage pool, with 2 USB drives (1TB) The backups are configured to backup to one of the 2 drives (depending on which one is connected) I have 2 questions: How do I get Backup Exec to tell me which disk to insert? I have used tapes before and it told me then which tape to use? I was hoping this was available for disks too. (Whilst there are only 2 at the moment, there will be more). And then how do I get Backup Exec to delete old backups when the disk if full.

    Read the article

  • Deleted the .AppleDouble files inside my Time Machine backups - are they still OK?

    - by Jon M
    My Ubuntu server is set up to emulate a TimeCapsule (after a very long weekend following the instructions here, here and here). My macbook pro has been backing up happily to it for a month or so now, and all seems well. The other day I was tidying up the extraneous files from my music collection on the server, got a bit loose with the find command... and ended up deleting all the .AppleDouble files underneath '/', which included the Time Machine folder. Now, Time Machine still appears to work fine, it backs up regularly, I can look through all the previous versions of my files, and they seem to restore without trouble. My question is: by deleting the .AppleDouble files, have I actually broken anything? Is the TM data still good, or should I trash it and start fresh (i.e. with a new 'day 0' full backup)?

    Read the article

  • PSU requirement question for my PC setup.

    - by user69474
    I understand that sometimes there may be a situation where the PSU is way more than required but in this case of mine, I'm not too sure. Sometimes when I play games, my computer will crash and restarts itself, 10 mins into the game. Once I received a message that says something like the power is overheating or something like that. Ok, so I have a 500W PSU. I have: 1x Internal DVD writer 1x SATA 250GB HD 1x Nvidia 8500 GT 2GB RAM. As I'm planning to get an additional 250GB SATA HD, I wonder if I need to increase my PSU as well -- in full knowledge of the previous crashes experienced before. Should I upgrade my PSU to 650W perhaps, or is that excessive?

    Read the article

  • Middleware Day at UK Oracle User Group Conference 2012

    - by JuergenKress
    Registration has opened for UK Oracle User Group Conference 2012, the UK’s largest Independent Oracle Technology & E-Business Suite conference from 3rd - 5th December, 2012. The conference will attract over 1,700 attendees from the UK and internationally. Spanning three days and featuring over 250 presentations which range from end-users telling their war stories to Oracle unveiling the latest product roadmaps. We have always been trusted to provide exceptional events with innovative content and renowned speakers and our 2012 event is no exception. It is just not our words, 95% of attendees from the last years conference, highly recommend the experience to other Oracle user. You can get an overview of the conference, listen what last year's delegates thought and explore the full agenda on the conference website: www.ukoug.org/ukoug2012. Join the UK Oracle User Group for ‘Middleware Sunday’ - an event packed with technical content for WebLogic administrators taking place on 2nd December the day before the start of UKOUG Conference 2012. The day has been organised by middleware enthusiasts Simon Haslam and Jacco Landlust and is free to UKOUG 2012 delegates. The content level will be pitched intermediate to advanced. So delegates are expected to be comfortable with WebLogic and its configuration terms, such as domains and managed servers. We will also have a fun, hands-on session for which you’ll need a quick laptop to join our mega-cluster! For more information visit the UKOUG 2012 website: www.ukoug.org/2012. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: simon Haslam,UK user group,middleware sunday,conference,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Does not recognize usb sticks and drives

    - by Peter
    When connecting any usb stick to my thinkpad ubuntu 10.10 does not recognize them. I don't see anything on the desktop. the output of "dmesg | tail -n10" gives me: [ 1965.696388] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1965.884537] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.072503] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.260349] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.506227] usb 1-1: new high speed USB device using ehci_hcd and address 9 [ 1966.572375] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.760379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.948358] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.136335] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.325423] hub 1-0:1.0: unable to enumerate USB device on port 1 When connecting my usb scanner to the same port: [ 2008.480135] usb 1-1: new high speed USB device using ehci_hcd and address 65 [ 2008.548389] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.736786] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.924379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.112348] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.300443] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.488536] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.732180] usb 1-1: new high speed USB device using ehci_hcd and address 71 [ 2014.796299] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2018.000128] usb 2-1: new full speed USB device using uhci_hcd and address 3 And ubuntu 10.10 recognizes that scanner. So: What can i do to see my usb stick? BTW: on my other Thinkpad running fedora 14 it works perfectly... Cheers -Peter

    Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >