Search Results

Search found 9900 results on 396 pages for 'hardware combination'.

Page 287/396 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

  • crippling repeating "pciehp card not present" notifications

    - by Nanne
    When using ubuntu (12.04, both installed and on a live usb) I get a lot of these messages: pciehp 0000:00:1c.5:pcie04: Card not present on Slot(37) pciehp 0000:00:1c.5:pcie04: Card present on Slot(37) And with a lot I mean about 20 per second. This has a crippling effect, and I would like to get rid of it :) The computer is a packard bell easynote BG48-U-100 DC. I tip I picked up from some fedora/redhat error here was to look at lspci -vnn. I have pasted the part about "00:1c.5" here: http://pastebin.com/0sfsiqW2 For what good it may do, here is the lsmod of my machine: http://pastebin.com/DQZy1kAL From that first pastebin I think to conclude that it has to do with the module shpchp, which seems to me (aka: google) to have something to do with ACPI. That's as far as I've come in disecting this. Can anyone help me along further? What can I do, check etc? I did see this topic but my intentions are not to surpress the error message: I know how to do this (from that topic ;) ), but I'm looking for a real sollution. Finding the problem on the internet does suspect me to believe it is neither an ubuntu specific nor a packard-bell specific problem.If you google the problem it seems that is present on several other distribution/hardware combo's as well, and it looks like the advice is to remove one of the drivers? I have no clue as to which driver I should look at and and what would be the effect of just removing it. I have seen this topic which is old-ish, but describes my problem and is about a similar computer. The solution in this topic was to compile a new kernel using a spanish guide, which seems a bit extreme to me, so I'm kinda hoping for a better solution than that.

    Read the article

  • Start frei für die Exadata Community im neuen Look!

    - by Frank Schneede (Exadata Community)
    Endlich ist es soweit! Pünktlich mit dem Start der DOAG Konferenz 2012, die vom 20.11. - 22.11.2012 in Nürnberg stattfindet, geht die Deutsche Exadata Community in völlig neu gestaltetem Outfit an den Start. Sie werden hier regelmäßig über neue Ankündigungen sowie Tipps und Tricks im Umgang mit Exadata informiert. Durch das freiere Blogformat werden an dieser Stelle auch Berichte über Exadata Projekte erscheinen, die besonders hervorhebenswert sind. Ich denke, Sie dürfen gespannt sein! Vieles hat sich seit dem letzten Update in der Community getan, denn auf der diesjährigen Oracle Open World in San Franzisco wurde eine ganze Reihe spannender Ankündigungen rund um Exadata gemacht. Die kürzlich vorgestellten Modelle Exadata Database Machine X3-2 und X3-8 sind in der grundlegenden Architektur zwar unverändert geblieben, jedoch sind die Modelle mit aktuellen Prozessoren in SandyBridge Mikroprozessorarchitektur noch leistungsfähiger als bisher. Der vierfach vergrößerte Flash Cache nimmt wesentlich mehr Daten auf und macht die Exadata so zur "In-Memory" Database Machine. Mit der neuen Exadata Software 11.2.3.2 kann der Flash Cache nun als persistenter Write Back Flash Cache verwendet werden. Durch das neuartige Caching profitieren auch OLTP Applikationen, die eine hohe Last von schreibenden Transaktionen verursachen, stärker von der Exadata Technologie. Ein neues Einstiegsmodell, das Exadata X3-2 Eighth Rack, vervollständigt die Produktfamilie und senkt abermals die Einstiegshürde für die Kunden.  Die beiden Community Tipps zur Exadata Hardware wurden aktualisiert. Lesen Sie alles über die Exadata Database Machine X3-2 und deren große Schwester, die Exadata Database Machine X3-8.

    Read the article

  • How to focus on one topic? [closed]

    - by Brian
    I have a huge problem while reading computer books. Every couple pages I'll end up googling something I want to learn more about, but then I'll find something on that page that I'll want to learn more about and google that (sometimes programming related, sometime hardware related). Normally after wasting around 3 hours going into different subjects I'll return to the original text only to repeat the process a few pages later. Any advice for sticking to one subject and learning that in-depth? I have tons of programming books I've read half-way through since I'll become interested in other languages/topics (not that I'm not interested in the books I've started). Also, what would be worth focusing on in depth? I've gone into Python in the most depth but for classes I'm learning Java and assembly (ARM and Motorola 68000). Also, I've taken a class on C++. Lately I've been spending most of my time learning about Linux instead of programming though. I'm not sure what would be worth focusing on the most to get a job. In other words, how can you focus on one topic and not let curiosity about everything else get in the way? Thanks in advance, Brian

    Read the article

  • Enterprise Cloud Infrastructure for Dummies eBook

    - by ferhat
    Are you considering "going to the cloud" as a way to cut IT costs and maximize your virtualization investments? Then Enterprise Cloud Infrastructure for Dummies is a no-nonsense guide to help you navigate this hot topic. This user friendly guide explains how to cut through the noise and take advantage of integrated virtualization and management tools to implement a cloud infrastructure that not only lowers operational costs but that can easily adapt and scale to run a broad range of application services safely and securely. &amp;amp;<span id="XinhaEditingPostion"></span>amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;gt; This e-book will serve as a valuable Cloud computing guide covering important topics such as: The current overall cloud landscape and how to best leverage private cloud infrastructure How to build an effective Enterprise Cloud Infrastructure using the Oracle Optimized Solution methodology Quantifiable costs savings gained using Oracle's integrated hardware and software and Optimized Solutions Download your exclusive copy of Enterprise Cloud Infrastructure, Oracle Special Edition today.

    Read the article

  • Skynet Big Data Demo Using Hexbug Spider Robot, Raspberry Pi, and Java SE Embedded (Part 3)

    - by hinkmond
    In Part 2, I described what connections you need to make for this demo using a Hexbug Spider Robot, a Raspberry Pi, and Java SE Embedded for programming. Here are some photos of me doing the soldering. Software engineers should not be afraid of a little soldering work. It's all good. See: Skynet Big Data Demo (Part 2) One thing to watch out for when you open the remote is that there may be some glue covering the contact points. Make sure to use an Exacto knife or small screwdriver to scrape away any glue or non-conductive material covering each place where you need to solder. And after you are done with your soldering and you gave the solder enough time to cool, make sure all your connections are marked so that you know which wire goes where. Give each wire a very light tug to make sure it is soldered correctly and is making good contact. There are lots of videos on the Web to help you if this is your first time soldering. Check out Laday Ada's (from adafruit.com) links on how to solder if you need some additional help: http://www.ladyada.net/learn/soldering/thm.html If everything looks good, zip everything back up and meet back here for how to connect these wires to your Raspberry Pi. That will be it for the hardware part of this project. See, that wasn't so bad. Hinkmond

    Read the article

  • Compiling custom kernel 3.7.x lowlatency on Ubuntu 12.04

    - by FlabbergastedPickle
    All, I have a peculiar problem with trying to compile a lowlatency flavor of the latest 3.7 kernel. I retrieved the prepatched source from the launchpad using bzr, compiled it using the usual make-kpkg using the current config file plus default options for the rest, installed the kernel and booted into it. Everything works except for the fglrx and wl drivers that I had to install in the original 12.04 lowlatency kernel. So, I tried recompiling these and succeeded with both of them (no errors were reported)--wl driver required a minor adjustment to system.h include while latest fglrx 12.11 beta11 (released yesterday, Dec. 3rd, 2012) compiled without the hitch. Yet, when I try to modprobe either module (both having in common the fact that they were built after the kernel, fglrx as a deb, and wl via the usual make/make install), I get "FATAL: no MODULENAME module found" (MODULENAME being either wl or fglrx). The graphic driver watermark shows 3D crossed out and "for testing purposes" (or "unsupported hardware," can't remember), and no fglrx or wl is loaded. More mysteriously, dmesg shows no attempt on kernel's behalf to load the said drivers, even though they are clearly in the right /lib/modules/KERNEL_VERSION folder. How is this possible? Has something fundamentally changed in 3.7 kernel that would prevent modprobing of these? I know that there is driver signing option that was merged recently but as far as I could tell the kernel config file generated by the build process had that disabled. OTOH, while building wl driver, I did get a warning that the driver was not signed... Then again, even if the kernel disallowed loading of those modules, shouldn't dmesg reflect that? Any thoughts on this one are most appreciated.

    Read the article

  • First ATMs programming language

    - by revo
    First ATMs performed tasks like a cash dispenser, they were offline machines which worked with punch cards impregnated with Carbon and a 6-digit PIN code. Maximum withdrawal with a card was 10 pounds and each one was a one-time use card - ATM swallowed cards! The first ATM was installed in London in the year 1967, as I looked at time line of programming languages, there were many programming languages made before that decade. I don't know about the hardware neither, but in which programming language it was written? *I didn't find a detailed biography of John Shepherd-Barron (ATM inventor at 70s) Update I found this picture, which is taken from a newspaper back to the year 1972 in Iran. Translated PS : Shows Mr. Rad-lon (if spelled correctly), The manager of Barros (if spelled correctly) International Educational Institute in United Kingdom at the right, and Mr. Jim Sutherland - Expert of Computer Kiosks. In the rest of the text I found on this paper, these kind of ATMs which called "Automated Computer Kiosk" were advertised with this: Mr. Rad-lon (if spelled correctly) puts his card to one specific location of Automated Computer Kiosk and after 10 seconds he withdraws his cash. Two more questions are: 1- How those ATMs were so fast? (withdrawal in 10 seconds in that year) 2- I didn't find any text on Internet which state about "Automated Computer Kiosk", Is it valid or were they being called Computer in that time?

    Read the article

  • My cpus are powered down periodically

    - by mgiammarco
    I post here because I am using Ubuntu but this is probably an hardware problem. Since I bought my new setup with AMD Athlon(tm) II X4 635 Processor and asus m4a89td pro/usb3 motherboard with ecc ram I have stuttering on videos. I was using ubuntu 11.10 now ubuntu 12.10. Looking at syslog I have found that periodically (I notice only on videos but it happens always) this thing happens: Mar 6 23:36:42 virtual1 kernel: [28564.375548] smpboot: CPU 1 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.380751] smpboot: CPU 2 is now offline Mar 6 23:36:42 virtual1 kernel: [28564.394947] smpboot: CPU 3 is now offline Mar 6 23:36:48 virtual1 kernel: [28569.917021] smpboot: Booting Node 0 Processor 1 APIC 0x1 Mar 6 23:36:48 virtual1 kernel: [28569.928015] LVT offset 0 assigned for vector 0xf9 Mar 6 23:36:48 virtual1 kernel: [28569.928372] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.928378] perf: IBS APIC setup failed on cpu #1 Mar 6 23:36:48 virtual1 kernel: [28569.931305] process: Switch to broadcast mode on CPU1 Mar 6 23:36:48 virtual1 kernel: [28569.934255] smpboot: Booting Node 0 Processor 2 APIC 0x2 Mar 6 23:36:48 virtual1 kernel: [28569.945554] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.945558] perf: IBS APIC setup failed on cpu #2 Mar 6 23:36:48 virtual1 kernel: [28569.948124] process: Switch to broadcast mode on CPU2 Mar 6 23:36:48 virtual1 kernel: [28569.949644] smpboot: Booting Node 0 Processor 3 APIC 0x3 Mar 6 23:36:48 virtual1 kernel: [28569.960838] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu Mar 6 23:36:48 virtual1 kernel: [28569.960840] perf: IBS APIC setup failed on cpu #3 Mar 6 23:36:48 virtual1 kernel: [28569.962953] process: Switch to broadcast mode on CPU3 I have: updated bios; tried all (really) bios options; changed ram; changed psu and cpu cooler; tried 3.8.1 kernel. What can I do now? Please help me! Thanks, Mario

    Read the article

  • Challenge Ends on Friday!

    - by Yolande Poirier
    This is your last chance to win a JavaOne trip. Submit a project video and code for the IoT Developer Challenge by this Friday, May 30.  12 JavaOne trips will be awarded to 3 professional teams and one student team. Members of two student teams will win laptops and certification training vouchers. Ask your last minute questions on the coaching form or the Challenge forum. They will be answered promptly. Your project video should explain how your project works. Any common video format such as mp4, avi, mov is fine. Your project must use Java Embedded - whether it is Java SE Embedded or ME Embedded - with the hardware of your choice, including any devices, boards and IoT technology. The project will be judged based on the project implementation, innovation and business usefulness. More details on the IoT Developer Challenge website  Just for fun! Here is a video of Vinicius Senger giving a tour of his home lab, and showing his boards and gadgets. &lt;span id=&quot;XinhaEditingPostion&quot;&gt;&lt;/span&gt;

    Read the article

  • Could someone explain why my world reconstructed from depth position is incorrect?

    - by yuumei
    I am attempting to reconstruct the world position in the fragment shader from a depth texture. I pass in the 8 frustum points in world space and interpolate them across fragments and then interpolate from near to far by the depth: highp float depth = (2.0 * CameraPlanes.x) / (CameraPlanes.y + CameraPlanes.x - texture( depthTexture, textureCoord ).x * (CameraPlanes.y - CameraPlanes.x)); // Reconstruct the world position from the linear depth highp vec3 world = mix( nearWorldPos, farWorldPos, depth ); CameraPlanes.x is the near plane CameraPlanes.y is the far. Assuming that my frustum positions are correct, and my depth looks correct, why is my world position wrong? (My depth texture is of format GL_DEPTH_COMPONENT32F if that matters) Thanks! :D Update: Screenshot of world position http://imgur.com/sSlHd So you can see it looks nearly correct. However as the camera moves, the colours (positions) change, which they shouldnt. I can get this to work, if I do the following: Write this into the depth attachment in the previous pass: gl_FragDepth = gl_FragCoord.z / gl_FragCoord.w / CameraPlanes.y; and then read the depth texture like so: depth = texture( depthTexture, textureCoord ).x However this will kill the hardware z buffer optimizations.

    Read the article

  • Best Usage of Multiple Computers For a Developer

    - by whaley
    I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

    Read the article

  • Oracle Loader for Hadoop 1.1.0.0.3

    - by mannamal
    We are pleased to announce availability of Oracle Loader for Hadoop 1.1.0.0.3, containing bug fixes and performance improvements to Oracle Loader for Hadoop. The updated product can be downloaded from here: http://www.oracle.com/technetwork/bdc/big-data-connectors/downloads/big-data-downloads-1451048.html Note that the Oracle Loader for Hadoop 1.1.0.0.3 kit is a complete kit containing the product and bug fixes. Fixes of the earlier version 1.1 patch releases are also included. Upgrading to Oracle Loader for Hadoop 1.1.0.0.3 (from versions 1.1.x): On the Oracle Big Data Appliance:  1. 1.  Upload the new oraloader rpm to the first Oracle Big Data Appliance server.  For example:   /tmp/oraloader-1.1.0.0.3-1.x86_64.rpm 2.     As the root user, use dcli from the first Oracle Big Data Appliance server to copy the new rpm to all nodes. For example:   #dcli -f /tmp/oraloader-1.1.0.0.3-1.x86_64.rpm  -d /tmp/oraloader-replace.rpm 3. 3.  As the root user, use dcli from the first Oracle Big Data Appliance server to replace the old oraloader rpm with the new one.  For example:  #dcli "rpm -e oraloader ; rpm -Uvh /tmp/oraloader-replace.rpm" On other hardware: 1. 1.  Unzip oraloader-1.1.0.0.3.x86_64.zip at <location of install> 2. 2.  Update OLH_HOME to point to <location of install>/oraloader-1.1.0.0.3 

    Read the article

  • eSTEP Newsletter for the technical EMEA partner community

    - by mseika
    We are pleased to present to you the first issue of the eSTEP Newsletter, which is dedicated to support the technical EMEA partner community in the effort to provide more information on what is going on within the corporation, what is the technical news regarding Hardware, events and all the important things which we think may be of interest to you. Invitation: STEP TechCast: Oracle Solaris 11 Express Get an insight on how Oracle Solaris 11 Express has raised the bar on the innovation introduced in Oracle Solaris 10. Learn about the new integrated features such as: network based package management tools improvements to built-in virtualization new virtualised network architecture security enhancements file system evolution  Learn how Oracle Solaris 11 Express provides greatly decreased planned system downtime, performs a completely safe system upgrade, achieves an unprecedented level of flexibility for application consolidation, and provides the highest levels of security in your datacenter. Date and time: Thursday, 7. July 2011, 13:00 - 14:00 CEST Speaker: Joost Pronk van Hoogeveen Target audience: Tech Presales Webcast Coordinates: You will find the coordinates in the eSTEP portal under the Events tab. Use your email-adress and PIN: eSTEP_2011 to get access. We are happy to get your comments and feedback.

    Read the article

  • Dedicated server: managed hosting or manage it myself?

    - by ddawber
    We're currently hosting a number of sites on a self-managed dedicated server. Some companies, however, offer a managed dedicated server hosting service. They offer: Roughly the same server spec Ticketing system support Managed daily backups Virtual firewall (but with a limit of 10 IP addresses allowed through at any one time) Now, this managed hosting is at extra expense - somewhere in the region of $500 per month, and the limit on the number of IP addresses they'll manage on the firewall is also a real pain. My thinking is it would be better and cheaper to Stay with the same host since the dedicated box is fine Get an Amazon AWS account and use their server to manage backups; there are a number of good tools that can be used to automate the process Configure iptables so that I have complete control of the firewall I want to know Is a managed virtual firewall likely to be more secure than me configuring iptables? Whether, in your opinion, it's best to let someone else take care of backups? If, from your experience, there's anything else i'm missing that warrants using managed hosting over a DIY service? I think there is some reluctance to not having managed hosting since a managed host in effect takes responsibility for your server, whereas any hardware or security issues with a server that we manage would mean we are forced to hold our hands up when a client site goes down. That said, I personally don't think a managed host does that much in the day to day running of your server (backups are automatic, OS updates are carried out with ease, etc.).

    Read the article

  • Sound card not detected in 13.04

    - by Ganessh Kumar R P
    I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

    Read the article

  • Repair ext4 filesystem on USB drive

    - by phineas
    Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

    Read the article

  • Cannot Boot, How to recover

    - by Kendor
    Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

    Read the article

  • Dual Monitor 'How To' for 12.04

    - by Kim Prince
    I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

    Read the article

  • 12.10 no audio via hdmi and video speeds up

    - by jackson
    I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

    Read the article

  • Ubuntu 11.10 not starting in Graphical mode?

    - by iammilind
    I am in deep trouble. I am using Ubuntu 11.10 in dual boot mode with XP. Originally my touch pad was not working, (sometimes). To fix that, I installed something. After reboot my Ubuntu is not booting up!! I have several software pkgs already installed in past several weeks so reinstall of OS is my last resort. Can someone help me to get it rebooted in graphical mode? I had followed the procedure mentioned in this thread as well. With that link, somehow I am able to restart in text mode. But no luck after that. I am not being able to go back on graphical mode. The important outputs of lspci are following: 00.00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.0 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) I am attaching few snapshots, for more details on hardware.

    Read the article

  • Accessing second hard drive

    - by Jonathan
    So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

    Read the article

  • Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

    - by pst007x
    I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

    Read the article

  • Issues in pulse audio in Ubuntu 11.10

    - by Kamal
    Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

    Read the article

  • OpenJDK In The News: AMD and Oracle to Collaborate in the OpenJDK Community [..]

    - by $utils.escapeXML($entry.author)
    During the JavaOne™ 2012 Strategy Keynote, AMD (NYSE: AMD) announced its participation in OpenJDK™ Project “Sumatra” in collaboration with Oracle and other members of the OpenJDK community to help bring heterogeneous computing capabilities to Java™ for server and cloud environments. The OpenJDK Project “Sumatra” will explore how the Java Virtual Machine (JVM), as well as the Java language and APIs, might be enhanced to allow applications to take advantage of graphics processing unit (GPU) acceleration, either in discrete graphics cards or in high-performance graphics processor cores such as those found in AMD accelerated processing units (APUs).“Affirming our plans to contribute to the OpenJDK Project represents the next step towards bringing heterogeneous computing to millions of Java developers and can potentially lead to future developments of new hardware models, as well as server and cloud programming paradigms,” said Manju Hegde, corporate vice president, Heterogeneous Applications and Developer Solutions at AMD. “AMD has an established track record of collaboration with open-software development communities from OpenCL™ to the Heterogeneous System Architecture (HSA) Foundation, and with this initiative we will help further the development of graphics acceleration within the Java community.”“We expect our work with AMD and other OpenJDK participants in Project “Sumatra” will eventually help provide Java developers with the ability to quickly leverage GPU acceleration for better performance,” said Georges Saab, vice president, Software Development, Java Platform Group at Oracle. "We hope individuals and other organizations interested in this exciting development will follow AMD's lead by joining us in Project “Sumatra."Quotes taken from the first press release from AMD mentioning OpenJDK, titled "AMD and Oracle to Collaborate in the OpenJDK Community to Explore Heterogeneous Computing for Java ".

    Read the article

  • What is a "Technical Programmer"? [closed]

    - by Mike E
    I've noticed in job posting boards a few postings, all from European companies in the games industry, for a "Technical Programmer". The job description in both was similar, having to do with tools development, 3d graphics programming, etc. It seems to be somewhere between a Technical Artist who's more technical than artist or who can code, and a Technical Director but perhaps without the seniority/experience. Information elsewhere on the position is sparse. The title seems redundant and I haven't seen any American companies post jobs by that name exactly. One example is this job posting on gamedev.net which isn't exactly thorough. In case the link dies: Subject: Technical Programmer Frictional Games, the creators of Amnesia: The Dark Descent and the Penumbra series, are looking for a talented programmer to join the company! You will be working for a small team with a big focus on finding new and innovating solutions. We want you who are not afraid to explore uncharted territory and constantly learn new things. Self-discipline and independence are also important traits as all work will be done from home. Some the things you will work with include: 3D math, rendering, shaders and everything else related. Console development (most likely Xbox 360). Hardware implementations (support for motion controls, etc). All coding is in C++, so great skills in that is imperative. As I mentioned, the job title has appeared from European companies so maybe it goes by another title in America. What other titles might this specialization of programmer go by?

    Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >