Search Results

Search found 11358 results on 455 pages for 'utf 16'.

Page 287/455 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

• Some Memory Slots Not Working on MSI FM2-A85XA-G65 Motherboard

  - by Mike Ciaraldi

  Short version of question: Does anyone have an MSI FM2-A85XA-G65 motherboard, who can confirm that all four memory slots work? Long version: Several months ago I bought an MSI FM2-A85XA-G65 motherboard at Newegg. At that point I installed an AMD A8-5500 processor and two sticks of Corsair Vengeance 8 GB DDR3-1866 memory, and put it into my file server. I installed the RAM in slots 1 and 3, as directed in the manual, to enable dual-channel memory access. It seemed to work fine, so I bought a second identical mobo (which arrived dead, but was quickly replaced by Newegg) and set of RAM, installed an A10-5800K, and put that into my production Linux machine. Again, it seemed to work well. Eventually I happened to notice that on the server only 8 GB of RAM appeared in the BIOS. I tried each of the slots and memory modules individually and in various combinations. I even swapped processors with the production machine. The result was that putting memory in slots 1 and 2 worked (showing a total of 16 GB), but any memory in slots 3 or 4 was not recognized. However, all four memory slots in the production machine worked, and I confirmed this with both processors. I contacted MSI and arranged to ship the defective mobo back to them for replacement under warranty. I did not want my file server to be down in the interim, and I had another machine I wanted to upgrade, so I bought a third identical mobo to use. That one had the same problem -- only memory slots 1 and 2 worked. I tested it thoroughly with multiple processors and memory sticks. I sent the defective mobo back to MSI and they sent me a new one. This has the same memory slot problem. So I sent it back. The replacement arrived the other day and shows the same problem. I contacted MSI yet again and they said that nobody else has reported memory slot problems on this board and it must be my processor. So my score so far is, out of six boards of this model, I have: One where all four slots work. One which was dead on arrival. Four where only memory slots 1 and 2 work. Before I tear my other machines apart and start swapping processors again I thought I would ask if anyone else has this exact model motherboard and could confirm that all four memory slots either do or do not work. According to MSI you should be able to just plug a single memory module into any of the slots and it will work (and it does on the one mobo I have which works correctly). If you have not yet used all four slots, this is a good time to test them so you know if you can expand your memory in the future. Thanks in advance to anyone who can help.

  Read the article

• Linux service --status-all shows "Firewall is stopped." what service does firewall refer to?

  - by codewaggle

  I have a development server with the lamp stack running CentOS: [Prompt]# cat /etc/redhat-release CentOS release 5.8 (Final) [Prompt]# cat /proc/version Linux version 2.6.18-308.16.1.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Oct 2 22:50:05 EDT 2012 [Prompt]# yum info iptables Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.anl.gov * extras: centos.mirrors.tds.net * rpmfusion-free-updates: mirror.us.leaseweb.net * rpmfusion-nonfree-updates: mirror.us.leaseweb.net * updates: mirror.steadfast.net Installed Packages Name : iptables Arch : x86_64 Version : 1.3.5 Release : 9.1.el5 Size : 661 k Repo : installed .... Snip.... When I run: service --status-all Part of the output looks like this: .... Snip.... httpd (pid xxxxx) is running... Firewall is stopped. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) ....Snip.... iptables has been loaded to the kernel and is active as represented by the rules being displayed. Checking just the iptables returns the rules just like status all does: [Prompt]# service iptables status Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) num target prot opt source destination 1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) num target prot opt source destination Chain RH-Firewall-1-INPUT (2 references) .... Snip.... Starting or restarting iptables indicates that the iptables have been loaded to the kernel successfully: [Prompt]# service iptables restart Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] [Prompt]# service iptables start Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_n[ OK ] I've googled "Firewall is stopped." and read a number of iptables guides as well as the RHEL documentation, but no luck. As far as I can tell, there isn't a "Firewall" service, so what is the line "Firewall is stopped." referring to?

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• What would cause my SendMail server not to acknowledge receiving a TCP Sequence?

  - by Mike B

  My TCP/IP Stack knowledge is a little rusty so please bear with me.... I have a CentOS 5.7 server with SendMail and am having seeing intermittent timeout issues sending email (particularly larger email) to other remote domains. It doesn't happen with all attachments or recipient domains. Just some. After some extended troubleshooting, I think I've narrowed it down to TCP Sequences not being acknowledged. Here's a breakdown of the TCP session from a packet capture I collected directly on my MTA (fooMTA): Packet 1 - 11: Standard TCP handshake followed by initial SMTP conversation. No errors. Packet #12 Recipient MTA: TCP sequence 231. Ack 91. Packet #13 FooMTA: TCP sequence 91. Ack 305. Packet #14 FooMTA: TCP sequence 1115. Ack 305. Packet #15 Recipient MTA: TCP sequence 305. Ack 2495. Packet #16 FooMTA: TCP sequence 2495. Ack 305. Packet #17 FooMTA: TCP sequence 5255. Ack 305. Packet #18: Recipient MTA: TCP sequence 305. Ack 5255. Packet #19: FooMTA: TCP sequence 6635. Ack 305. Packet #20: FooMTA: TCP sequence 8015. Ack 305. Packet #21: Recipient MTA: TCP Sequence 305. Ack 8015. Packet #22: FooMTA: TCP Sequence 10775. Ack 305. Packet #23: FooMTA: TCP Sequence 13535. Ack 305. Packet #24: Recipient MTA: TCP sequence 305. Ack 10775 Packet #25: FooMTA: TCP Sequence 14915. Ack 305 It keeps going like this with my server still thinking it hasn’t received sequence 305… in response the remote side eventually retransmits its prior data thinking that it never arrived. Eventually the gap gets so large that no new data is sent and the remote MTA keeps retransmitting old stuff. This contributes to an exponential backoff and eventually the remote side gives up. What’s strange to me is that I see the “missing” TCP sequence (305 in this case) arriving back to my server (via a packet capture collected directly from fooMTA) So I don’t get why my server keeps asking for it. Could this be firewall related? What would be the next step in troubleshooting?

  Read the article

• Weird nfs performance: 1 thread better than 8, 8 better than 2!

  - by Joe

  I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

  Read the article

• Apache's htcacheclean doesn't scale: How to tame a huge Apache disk_cache?

  - by flight

  We have an Apache setup with a huge disk_cache (500.000 entries, 50 GB disk space used). The cache grows by 16 GB every day. My problem is that the cache seems to be growing nearly as fast as it's possible to remove files and directories from the cache filesystem! The cache partition is an ext3 filesystem (100GB, "-t news") on an iSCSI storage. The Apache server (which acts as a caching proxy) is a VM. The disk_cache is configured with CacheDirLevels=2 and CacheDirLength=1, and includes variants. A typical file path is "/htcache/B/x/i_iGfmmHhxJRheg8NHcQ.header.vary/A/W/oGX3MAV3q0bWl30YmA_A.header". When I try to call htcacheclean to tame the cache (non-daemon mode, "htcacheclean-t -p/htcache -l15G"), IOwait is going through the roof for several hours. Without any visible action. Only after hours, htcacheclean starts to delete files from the cache partition, which takes a couple more hours. (A similar problem was brought up in the Apache mailing list in 2009, without a solution: http://www.mail-archive.com/[email protected]/msg42683.html) The high IOwait leads to problems with the stability of the web server (the bridge to the Tomcat backend server sometimes stalls). I came up with my own prune script, which removes files and directories from random subdirectories of the cache. Only to find that the deletion rate of the script is just slightly higher than the cache growth rate. The script takes ~10 seconds to read the a subdirectory (e.g. /htcache/B/x) and frees some 5 MB of disk space. In this 10 seconds, the cache has grown by another 2 MB. As with htcacheclean, IOwait goes up to 25% when running the prune script continuously. Any idea? Is this a problem specific to the (rather slow) iSCSI storage? Should I choose a different file system for a huge disk_cache? ext2? ext4? Are there any kernel parameter optimizations for this kind of scenario? (I already tried the deadline scheduler and a smaller read_ahead_kb, without effect).

  Read the article

• How to find the process(es) which are hogging the machine

  - by Aaron Digulla

  Scenario: All of a sudden, my computer feels sluggish. Mouse moves but windows take ages to open, etc. uptime says the load is 7.69 and raising. What is the fastest way to find out which process(es) are the cause of the load? Now, "top" and similar tools isn't the answer because they either show CPU or memory usage but not both at the same time. What I need is the single command which I might be able to type as it happens - something that will figure out any of System is trying to swap 8GB of RAM to disk because process X ... or process X seeks all over the disk or process X uses 400% CPU" So what I'm looking for is iostat, htop/atop and similar tools run into one with an output like this: 1235 cp - Disk trashing 87 chrome - Uses 2&nbsp;GB of RAM 137 nfs_bench - Uses 95% of the network bandwidth I don't want a tool that gives me some numbers which I can analyze but a tool that tells me exactly which process causes the current load. Assume that the user in front of the keyboard barely knows how to write "process", but the user is quickly overwhelmed when it comes to "resident size", "virtual memory" or "process life cycle". My argument goes like this: A user notices a problem. There can be thousands of reasons ... well, almost :-) The user wants to know the source of the problem. The current solutions give me lots of numbers, and I need to know what these numbers mean. What I'm looking for is a meta tool. 99% of the data is irrelevant to the problem. So what the tool should do is look for processes which hog some resource and list only those along with "this process needs a lot of CPU, this produces many IRQs, this process allocates a lot of RAM (and it's still growing)". This will be a relatively short list. It will be much more simple for someone new to this to locate the culprit from this list than from the output of, say, htop which gives me about 5000 numbers but requires me to fold multi-threaded processes myself (I have 50 lines which say VIRT 2750M but only 16 GB of RAM - the machine ought to swap itself to death but of course, this is a misinterpretation of the data that can happen quickly).

  Read the article

• Is there a bug with Apache 2.2 and content filters (and maybe mod_proxy)?

  - by asciiphil

  I'm running Apache 2.2.15-29 on RHEL 6 (actually Scientific Linux 6.4) and I'm trying to set up a reverse proxy with content rewriting so all of the links on the proxied web pages are rewritten to reference the proxy host. I'm running into a problem with some of the content rewriting and I'd like to know if this is a bug or if I'm doing something wrong (and how to do it right, if applicable). I'm proxying a subdirectory on an internal host (internal.example.com/foo) onto the root of an external host (external.example.com). I need to rewrite HTML, CSS, and Javascript content to fix all of the URLs. I'm also hosting some content locally on the external host, which I don't think is a problem but I'm mentioning here for completeness. My httpd.conf looks roughly like this: <VirtualHost *:80> ServerName external.example.com ServerAlias example.com # Serve all local content directly, reverse-proxy all unknown URIs. RewriteEngine On RewriteRule ^(/(index.html?)?)?$ http://internal.example.com/foo/ [P] RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} -f [OR] RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} -d RewriteRule ^.*$ - [L] RewriteRule ^/~ - [L] RewriteRule ^(.*)$ http://internal.example.com$1 [P] # Standard header rewriting. ProxyPassReverse / http://internal.example.com/foo/ ProxyPassReverseCookieDomain internal.example.com external.example.com ProxyPassReverseCookiePath /foo/ / # Strip any Accept-Encoding: headers from the client so we can process the pages # as plain text. RequestHeader unset Accept-Encoding # Use mod_proxy_html to fix URLs in text/html content. ProxyHTMLEnable On ProxyHTMLURLMap http://internal.example.com/foo/ / ProxyHTMLURLMap http://internal.example.com/foo / ProxyHTMLURLMap /foo/ / ## Use mod_substitute to fix URLs in CSS and Javascript #<Location /> # AddOutputFilterByType SUBSTITUTE text/css # AddOutputFilterByType SUBSTITUTE text/javascript # Substitute "s|http://internal.example.com/foo/|/|nq" #</Location> # Use mod_ext_filter to fix URLs in CSS and Javascript ExtFilterDefine fixurlcss mode=output intype=text/css cmd="/bin/sed -rf /etc/httpd/fixurls" ExtFilterDefine fixurljs mode=output intype=text/javascript cmd="/bin/sed -rf /etc/httpd/fixurls" <Location /> SetOutputFilter fixurlcss;fixurljs </Location> </VirtualHost> The text/html rewriting works just fine. When I use either mod_substitute or mod_ext_filter, the external server sends the pages as Transfer-Encoding: chunked, sends all of the data, and then closes the connection without sending the final, zero-length chunk. Some HTTP clients are unhappy with this. (Chrome won't process any content sent in this way, for example, so the pages don't get CSS applied to them.) Here's a sample wget session: $ wget -O /dev/null -S http://external.example.com/include/jquery.js --2013-11-01 11:36:36-- http://external.example.com/include/jquery.js Resolving external.example.com (external.example.com)... 192.168.0.1 Connecting to external.example.com (external.example.com)|192.168.0.1|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 200 OK Date: Fri, 01 Nov 2013 15:36:36 GMT Server: Apache Last-Modified: Tue, 29 Oct 2013 13:09:10 GMT ETag: "1d60026-187b8-4e9e0ec273e35" Accept-Ranges: bytes Vary: Accept-Encoding X-UA-Compatible: IE=edge,chrome=1 Content-Type: text/javascript;charset=utf-8 Connection: close Transfer-Encoding: chunked Length: unspecified [text/javascript] Saving to: `/dev/null' [ <=> ] 100,280 --.-K/s in 0.005s 2013-11-01 11:36:37 (19.8 MB/s) - Read error at byte 100280 (Success).Retrying. --2013-11-01 11:36:38-- (try: 2) http://external.example.com/include/jquery.js Connecting to external.example.com (external.example.com)|192.168.0.1|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 416 Requested Range Not Satisfiable Date: Fri, 01 Nov 2013 15:36:38 GMT Server: Apache Vary: Accept-Encoding Content-Type: text/html;charset=utf-8 Content-Length: 260 Connection: close The file is already fully retrieved; nothing to do. Am I doing something wrong? Am I hitting some sort of Apache bug? What do I need to do to get it working? (Note that I'd prefer solutions that work within RHEL-6-packaged RPMs and upgrading to Apache 2.4 would be a last resort, as we have a lot of infrastructure built around 2.2 on this system at the moment.)

  Read the article

• VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

  - by David Griffith

  I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

  Read the article

• Synergy 1.5 crash (OSX 10.6.8)

  - by Oliver

  THANKS FOR TAKING THE TIME TO READ THIS I recently installed Synergy 1.5 r2278 (for Mac OSX 10.6.8) and was using it fine for most of the day, then it decided to stop working (the only thing I changed systemwise was the screensaver - and then after it started crashing disabled it - to see if it would resolve). When I start Synergy (on the Mac - Client) it says: after about 5 seconds (and successfully connecting to the Server) "synergyc quit unexpectedly" Here is the crash log (w/ binery info removed - too long for post requirements) Process: synergyc [1026] Path: /Applications/Synergy.app/Contents/MacOS/synergyc Identifier: synergy Version: ??? (???) Code Type: X86 (Native) Parent Process: Synergy [1023] Date/Time: 2014-05-28 15:36:17.746 +0930 OS Version: Mac OS X 10.6.8 (10K549) Report Version: 6 Interval Since Last Report: 2144189 sec Crashes Since Last Report: 23 Per-App Interval Since Last Report: 10242 sec Per-App Crashes Since Last Report: 9 Anonymous UUID: 86D5A57C-13D4-470E-AC72-48ACDDDE5EB0 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 5 Application Specific Information: abort() called Thread 0: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x95cf3afa mach_msg_trap + 10 1 libSystem.B.dylib 0x95cf4267 mach_msg + 68 2 com.apple.CoreFoundation 0x95af02df __CFRunLoopRun + 2079 3 com.apple.CoreFoundation 0x95aef3c4 CFRunLoopRunSpecific + 452 4 com.apple.CoreFoundation 0x95aef1f1 CFRunLoopRunInMode + 97 5 com.apple.HIToolbox 0x93654e04 RunCurrentEventLoopInMode + 392 6 com.apple.HIToolbox 0x93654bb9 ReceiveNextEventCommon + 354 7 com.apple.HIToolbox 0x937dd137 ReceiveNextEvent + 83 8 synergyc 0x000356d0 COSXEventQueueBuffer::waitForEvent(double) + 48 9 synergyc 0x00010dd5 CEventQueue::getEvent(CEvent&, double) + 325 10 synergyc 0x00011fb0 CEventQueue::loop() + 272 11 synergyc 0x00044eb6 CClientApp::mainLoop() + 134 12 synergyc 0x0005c509 standardStartupStatic(int, char**) + 41 13 synergyc 0x000448a9 CClientApp::runInner(int, char**, ILogOutputter*, int (*)(int, char**)) + 137 14 synergyc 0x0005c4b0 CAppUtilUnix::run(int, char**) + 64 15 synergyc 0x000427df CApp::run(int, char**) + 63 16 synergyc 0x00006e65 main + 117 17 synergyc 0x00006dd9 start + 53 Thread 1: 0 libSystem.B.dylib 0x95d607da __sigwait + 10 1 libSystem.B.dylib 0x95d607b6 sigwait$UNIX2003 + 71 2 synergyc 0x00009583 CArchMultithreadPosix::threadSignalHandler(void*) + 67 3 libSystem.B.dylib 0x95d21259 _pthread_start + 345 4 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 2: 0 libSystem.B.dylib 0x95d21aa2 __semwait_signal + 10 1 libSystem.B.dylib 0x95d2175e _pthread_cond_wait + 1191 2 libSystem.B.dylib 0x95d212b1 pthread_cond_timedwait$UNIX2003 + 72 3 synergyc 0x00009476 CArchMultithreadPosix::waitCondVar(CArchCondImpl*, CArchMutexImpl*, double) + 150 4 synergyc 0x0002b18f CCondVarBase::wait(double) const + 63 5 synergyc 0x0002ce68 CSocketMultiplexer::serviceThread(void*) + 136 6 synergyc 0x0002d698 TMethodJob<CSocketMultiplexer>::run() + 40 7 synergyc 0x0002b8f4 CThread::threadFunc(void*) + 132 8 synergyc 0x00008f30 CArchMultithreadPosix::doThreadFunc(CArchThreadImpl*) + 80 9 synergyc 0x0000902a CArchMultithreadPosix::threadFunc(void*) + 74 10 libSystem.B.dylib 0x95d21259 _pthread_start + 345 11 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 3: Dispatch queue: com.apple.libdispatch-manager 0 libSystem.B.dylib 0x95d1a382 kevent + 10 1 libSystem.B.dylib 0x95d1aa9c _dispatch_mgr_invoke + 215 2 libSystem.B.dylib 0x95d19f59 _dispatch_queue_invoke + 163 3 libSystem.B.dylib 0x95d19cfe _dispatch_worker_thread2 + 240 4 libSystem.B.dylib 0x95d19781 _pthread_wqthread + 390 5 libSystem.B.dylib 0x95d195c6 start_wqthread + 30 Thread 4: 0 libSystem.B.dylib 0x95d19412 __workq_kernreturn + 10 1 libSystem.B.dylib 0x95d199a8 _pthread_wqthread + 941 2 libSystem.B.dylib 0x95d195c6 start_wqthread + 30 Thread 5 Crashed: 0 libSystem.B.dylib 0x95d610ee __semwait_signal_nocancel + 10 1 libSystem.B.dylib 0x95d60fd2 nanosleep$NOCANCEL$UNIX2003 + 166 2 libSystem.B.dylib 0x95ddbfb2 usleep$NOCANCEL$UNIX2003 + 61 3 libSystem.B.dylib 0x95dfd6f0 abort + 105 4 libSystem.B.dylib 0x95d79b1b _Unwind_Resume + 59 5 synergyc 0x00008fd1 CArchMultithreadPosix::doThreadFunc(CArchThreadImpl*) + 241 6 synergyc 0x0000902a CArchMultithreadPosix::threadFunc(void*) + 74 7 libSystem.B.dylib 0x95d21259 _pthread_start + 345 8 libSystem.B.dylib 0x95d210de thread_start + 34 Thread 5 crashed with X86 Thread State (32-bit): eax: 0x0000003c ebx: 0x95d60f39 ecx: 0xb0288a7c edx: 0x95d610ee edi: 0x00521950 esi: 0xb0288ad8 ebp: 0xb0288ab8 esp: 0xb0288a7c ss: 0x0000001f efl: 0x00000247 eip: 0x95d610ee cs: 0x00000007 ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037 cr2: 0x002fe000 Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• MVC Portable Areas Enhancement &ndash; Embedded Resource Controller

  - by Steve Michelotti

  MvcContrib contains a feature called Portable Areas which I’ve recently blogged about. In short, portable areas provide a way to distribute MVC binary components as simple .NET assemblies where the aspx/ascx files are actually compiled into the assembly as embedded resources. This is an extremely cool feature but once you start building robust portable areas, you’ll also want to be able to access other external files like css and javascript.  After my recent post suggesting portable areas be expanded to include other embedded resources, Eric Hexter asked me if I’d like to contribute the code to MvcContrib (which of course I did!). Embedded resources are stored in a case-sensitive way in .NET assemblies and the existing embedded view engine inside MvcContrib already took this into account. Obviously, we’d want the same case sensitivity handling to be taken into account for any embedded resource so my job consisted of 1) adding the Embedded Resource Controller, and 2) a little refactor to extract the logic that deals with embedded resources so that the embedded view engine and the embedded resource controller could both leverage it and, therefore, keep the code DRY. The embedded resource controller targets these scenarios: External image files that are referenced in an <img> tag External files referenced like css or JavaScript files Image files referenced inside css files Embedded Resources Walkthrough This post will describe a walkthrough of using the embedded resource controller in your portable areas to include the scenarios outlined above. I will build a trivial “Quick Links” widget to illustrate the concepts. The portable area registration is the starting point for all portable areas. The MvcContrib.PortableAreas.EmbeddedResourceController is optional functionality – you must opt-in if you want to use it.  To do this, you simply “register” it by providing a route in your area registration that uses it like this: 1: context.MapRoute("ResourceRoute", "quicklinks/resource/{resourceName}", 2: new { controller = "EmbeddedResource", action = "Index" }, 3: new string[] { "MvcContrib.PortableAreas" }); First, notice that I can specify any route I want (e.g., “quicklinks/resources/…”).  Second, notice that I need to include the “MvcContrib.PortableAreas” namespace as the fourth parameter so that the framework is able to find the EmbeddedResourceController at runtime. The handling of embedded views and embedded resources have now been merged.  Therefore, the call to: 1: RegisterTheViewsInTheEmmeddedViewEngine(GetType()); has now been removed (breaking change).  It has been replaced with: 1: RegisterAreaEmbeddedResources(); Other than that, the portable area registration remains unchanged. The solution structure for the static files in my portable area looks like this: I’ve got a css file in a folder called “Content” as well as a couple of image files in a folder called “images”. To reference these in my aspx/ascx code, all of have to do is this: 1: <link href="<%= Url.Resource("Content.QuickLinks.css") %>" rel="stylesheet" type="text/css" /> 2: <img src="<%= Url.Resource("images.globe.png") %>" /> This results in the following HTML mark up: 1: <link href="/quicklinks/resource/Content.QuickLinks.css" rel="stylesheet" type="text/css" /> 2: <img src="/quicklinks/resource/images.globe.png" /> The Url.Resource() method is now included in MvcContrib as well. Make sure you import the “MvcContrib” namespace in your views. Next, I have to following html to render the quick links: 1: <ul class="links"> 2: <li><a href="http://www.google.com">Google</a></li> 3: <li><a href="http://www.bing.com">Bing</a></li> 4: <li><a href="http://www.yahoo.com">Yahoo</a></li> 5: </ul> Notice the <ul> tag has a class called “links”. This is defined inside my QuickLinks.css file and looks like this: 1: ul.links li 2: { 3: background: url(/quicklinks/resource/images.navigation.png) left 4px no-repeat; 4: padding-left: 20px; 5: margin-bottom: 4px; 6: } On line 3 we’re able to refer to the url for the background property. As a final note, although we already have complete control over the location of the embedded resources inside the assembly, what if we also want control over the physical URL routes as well. This point was raised by John Nelson in this post. This has been taken into account as well. For example, suppose you want your physical url to look like this: 1: <img src="/quicklinks/images/globe.png" /> instead of the same corresponding URL shown above (i.e., “/quicklinks/resources/images.globe.png”). You can do this easily by specifying another route for it which includes a “resourcePath” parameter that is pre-pended. Here is the complete code for the area registration with the custom route for the images shown on lines 9-11: 1: public class QuickLinksRegistration : PortableAreaRegistration 2: { 3: public override void RegisterArea(System.Web.Mvc.AreaRegistrationContext context, IApplicationBus bus) 4: { 5: context.MapRoute("ResourceRoute", "quicklinks/resource/{resourceName}", 6: new { controller = "EmbeddedResource", action = "Index" }, 7: new string[] { "MvcContrib.PortableAreas" }); 8:   9: context.MapRoute("ResourceImageRoute", "quicklinks/images/{resourceName}", 10: new { controller = "EmbeddedResource", action = "Index", resourcePath = "images" }, 11: new string[] { "MvcContrib.PortableAreas" }); 12:   13: context.MapRoute("quicklink", "quicklinks/{controller}/{action}", 14: new {controller = "links", action = "index"}); 15:   16: this.RegisterAreaEmbeddedResources(); 17: } 18:   19: public override string AreaName 20: { 21: get 22: { 23: return "QuickLinks"; 24: } 25: } 26: } The Quick Links portable area results in the following requests (including custom route formats): The complete code for this post is now included in the Portable Areas sample solution in the latest MvcContrib source code. You can get the latest code now.  Portable Areas open up exciting new possibilities for MVC development!

  Read the article

• Compiling examples for consuming the REST Endpoints for WCF Service using Agatha

  - by REA_ANDREW

  I recently made two contributions to the Agatha Project by Davy Brion over on Google Code, and one of the things I wanted to follow up with was a post showing examples and some, seemingly required tid bits.  The contributions which I made where: To support StructureMap To include REST (JSON and XML) support for the service contract The examples which I have made, I want to format them so they fit in with the current format of examples over on Agatha and hopefully create and submit a third patch which will include these examples to help others who wish to use these additions. Whilst building these examples for both XML and JSON I have learnt a couple of things which I feel are not really well documented, but are extremely good practice and once known make perfect sense.  I have chosen a real basic e-commerce context for my example Requests and Responses, and have also made use of the excellent tool AutoMapper, again on Google Code. Setting the scene I have followed the Pipes and Filters Pattern with the IQueryable interface on my Repository and exposed the following methods to query Products: IQueryable<Product> GetProducts(); IQueryable<Product> ByCategoryName(this IQueryable<Product> products, string categoryName) Product ByProductCode(this IQueryable<Product> products, String productCode) I have an interface for the IProductRepository but for the concrete implementation I have simply created a protected getter which populates a private List<Product> with 100 test products with random data.  Another good reason for following an interface based approach is that it will demonstrate usage of my first contribution which is the StructureMap support.  Finally the two Domain Objects I have made are Product and Category as shown below: public class Product { public String ProductCode { get; set; } public String Name { get; set; } public Decimal Price { get; set; } public Decimal Rrp { get; set; } public Category Category { get; set; } }   public class Category { public String Name { get; set; } }   Requirements for the REST Support One of the things which you will notice with Agatha is that you do not have to decorate your Request and Response objects with the WCF Service Model Attributes like DataContract, DataMember etc… Unfortunately from what I have seen, these are required if you want the same types to work with your REST endpoint.  I have not tried but I assume the same result can be achieved by simply decorating the same classes with the Serializable Attribute.  Without this the operation will fail. Another surprising thing I have found is that it did not work until I used the following Attribute parameters: Name Namespace e.g. [DataContract(Name = "GetProductsRequest", Namespace = "AgathaRestExample.Service.Requests")] public class GetProductsRequest : Request { }   Although I was surprised by this, things kind of explained themselves when I got round to figuring out the exact construct required for both the XML and the REST.  One of the things which you already know and are then reminded of is that each of your Requests and Responses ultimately inherit from an abstract base class respectively. This information needs to be represented in a way native to the format being used.  I have seen this in XML but I have not seen the format which is required for the JSON. JSON Consumer Example I have used JQuery to create the example and I simply want to make two requests to the server which as you will know with Agatha are transmitted inside an array to reduce the service calls.  I have also used a tool called json2 which is again over at Google Code simply to convert my JSON expression into its string format for transmission.  You will notice that I specify the type of Request I am using and the relevant Namespace it belongs to.  Also notice that the second request has a parameter so each of these two object are representing an abstract Request and the parameters of the object describe it. <script type="text/javascript"> var bodyContent = $.ajax({ url: "http://localhost:50348/service.svc/json/processjsonrequests", global: false, contentType: "application/json; charset=utf-8", type: "POST", processData: true, data: JSON.stringify([ { __type: "GetProductsRequest:AgathaRestExample.Service.Requests" }, { __type: "GetProductsByCategoryRequest:AgathaRestExample.Service.Requests", CategoryName: "Category1" } ]), dataType: "json", success: function(msg) { alert(msg); } }).responseText; </script>   XML Consumer Example For the XML Consumer example I have chosen to use a simple Console Application and make a WebRequest to the service using the XML as a request.  I have made a crude static method which simply reads from an XML File, replaces some value with a parameter and returns the formatted XML.  I say crude but it simply shows how XML Templates for each type of Request could be made and then have a wrapper utility in whatever language you use to combine the requests which are required.  The following XML is the same Request array as shown above but simply in the XML Format. <?xml version="1.0" encoding="utf-8" ?> <ArrayOfRequest xmlns="http://schemas.datacontract.org/2004/07/Agatha.Common" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <Request i:type="a:GetProductsRequest" xmlns:a="AgathaRestExample.Service.Requests"/> <Request i:type="a:GetProductsByCategoryRequest" xmlns:a="AgathaRestExample.Service.Requests"> <a:CategoryName>{CategoryName}</a:CategoryName> </Request> </ArrayOfRequest>   It is funny because I remember submitting a question to StackOverflow asking whether there was a REST Client Generation tool similar to what Microsoft used for their RestStarterKit but which could be applied to existing services which have REST endpoints attached.  I could not find any but this is now definitely something which I am going to build, as I think it is extremely useful to have but also it should not be too difficult based on the information I now know about the above.  Finally I thought that the Strategy Pattern would lend itself really well to this type of thing so it can accommodate for different languages. I think that is about it, I have included the code for the example Console app which I made below incase anyone wants to have a mooch at the code.  As I said above I want to reformat these to fit in with the current examples over on the Agatha project, but also now thinking about it, make a Documentation Web method…{brain ticking} :-) Cheers for now and here is the final bit of code: static void Main(string[] args) { var request = WebRequest.Create("http://localhost:50348/service.svc/xml/processxmlrequests"); request.Method = "POST"; request.ContentType = "text/xml"; using(var writer = new StreamWriter(request.GetRequestStream())) { writer.WriteLine(GetExampleRequestsString("Category1")); } var response = request.GetResponse(); using(var reader = new StreamReader(response.GetResponseStream())) { Console.WriteLine(reader.ReadToEnd()); } Console.ReadLine(); } static string GetExampleRequestsString(string categoryName) { var data = File.ReadAllText(Path.Combine(Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location), "ExampleRequests.xml")); data = data.Replace("{CategoryName}", categoryName); return data; } }

  Read the article

• SQL Developer Blitz at ODTUG Kscope12

  - by thatjeffsmith

  Oracle Development Tools User Group (ODTUG) puts on an outstanding event, and I enjoy that the content comes FIRST. Yes, the after-event parties and entertainment are first class, but I look forward most to sitting in on some excellent sessions. For Kscope12 one would expect Oracle to have a large presence, and you would be absolutely correct! The APEX team will be there in full force, and we’ll have sessions on JDeveloper, ADF, and .NET. But what I want to talk about today is our awesome line-up of coverage for Oracle SQL Developer (Surprise!) DB and Developer’s Toolbox Symposium Kris Rice or @krisrice, Product Development Manager for SQL Developer, will speak at 10AM Sunday about SQL Developer Data Modeler. Our free data modeling solution allows one to reverse engineer a data dictionary to a model, modify it, and create a script of the changes. Collaboration is an important part of any development team; with built-in subversion support, the modeler makes collaboration easy, not just possible. After the morning break, I’ll be talking about SQL Developer’s PL/SQL support. From creating your code, to debugging, tuning, testing, and documenting PL/SQL – SQL Developer fits the bill. Since I have a full hour, I should have time to do a little riff on using source control to version and manage your revisions too! At 3:15 Jagan Athreya will talk about the new integration between SQL Developer and Enterprise Manager Cloud Control 12c. Enabling developers to define changes in SQLDeveloper and allowing DBAs to promote these changes to Test and Production via Enterprise Manager will reduce errors, accelerate productivity, and help eliminate unplanned downtime. Get your SQL Developer groove on at ODTUG Kscope12! Presentations SQL Developer Tips and Tricks Monday June 25, Session 5, 4:15 pm – 5:15 pm I’ll take you through my favorite keyboard shortcuts, top 10 preferences every user should tweak, and spotlight features that the average user probably hasn’t discovered yet. My goal for this session is for everyone to take 1-2 tips they can implement immediately to save mucho time. I enjoy interacting with the audience so no two versions of this presentation are the same. Oracle SQL Developer and Data Modeler New Features When: Tuesday June 26, Session 6, 8:30 am – 9:30 am Ashley Chen, my PM-partner-in-crime, will be covering all the new features from our two latest updates. So if you’re new to SQL Developer, or you’ve been using an older version, stop by and see what new toys you have to play with. I also have a bet with Ashley that she will have more attendees than me, so be sure to show up so I can collect. Debugging PL/SQL With SQL Developer When: Wednesday June 27, Session 16, 3:00 pm – 4:00 pm Me again – sorry. This time I have an entire hour to JUST talk about PL/SQL and debugging! Should you use a watch with a break condition, or a breakpoint with a passcount? How does external debugging with a Perl script work? Can I just debug an anonymous PL/SQL block. So if debugging to you is just a DBMS_OUTPUT.PUT_LINE() call, stop by and see how our IDE can help you take things to the next level! Or is that level++? Hands-on-Training SQL Developer Soup to Nuts When: Tuesday, 8:00 AM – 9:30 AM If you learn by doing, this is the session for you. Bring your own laptop or use one of the lab machines. We’ll give you a VirtualBox OEL image running 11gR2 EE Database with all the fixin’s (that’s Southern speak for Partitioning, Advanced Compression, Tuning & Diagnostic Packs, etc), TimesTen, APEX and much more. All you have to do is login and run through our lab exercises. You can start with a model and work your way up to debugging and testing your own appliction, or you can pick and choose your lessons to suit your needs. We’ll have people on hand to help you out and answer your questions. Booth Hours We’ll be in the vendor area and have our very own ‘demo pod’ for SQL Developer. Between Kris, Ashley, and I we should be able to answer your questions or show you how to ‘do that thing’ in the tool. Or just stop by and say hello! We’ll be around the following hours’ish: Sunday, June 24, 2012 6:00 PM – 8:00 PM Monday, June 25, 2012 9:00 AM – 4:30 PM Tuesday, June 26, 2012 9:30 AM – 3:30 PM Wednesday, June 27, 2012 10:15 AM – 2:00 PM No Excuses – If You Have Questions, This is Your Chance to Get Your Answers! We’re doing just about everything outside of a scavenger hunt to bring information and value to our users. Let us know what you like, what you don’t like, and we’ll do our best to do more of the former and less of the latter!

  Read the article

• Tykie

  - by Brian

  Here’s the obituary my mother wrote for Tykie, I still miss the little guy quite a bit. Anyone who’s interested in further information on hearing dogs should check out the IHDI website. I cannot begin to express how helpful a hearing dog can be for the hearing impaired. If you feel so inclined, please make a donation. In Memoriam, Tykie 1993-2010 The American Legion Post 401, South Wichita, KS, supported one of its members and commander by sponsoring a service dog for him. Unlike most service dogs this one was for the hearing impaired. Both Ocie and Betty Sims had hearing loss – Ocie more than Betty. The Post and Auxilliary had garage sales, auctions and other fund-raising endeavors to get donations for the dog. Betty made Teddy bears with growlers that were auctioned for donations to bring a hearing dog from International Hearing Dog, Henderson, Colorado. Tykie, a small wiry, salt and pepper terrier, arrived September 1, 1994 to begin his work that included attending Post 401 meetings and celebrations as well as raising more money to be donated to IHD to help others have hearing dogs. Tykie was a young dog less than a year old when he came to Wichita. He was always anxious to please and seldom barked, though he did put out a kind of cry when he was giving his urgent announcement that someone was at the door or the telephone was ringing. He also enjoyed chasing squirrels in the backyard garden that Ocie prized. In 1995, Betty almost died of a lung infection. Tykie was at the hospital with Ocie when he could visit. Several weeks after she was able to come home after a miraculous recovery, Tykie and Ocie went to a car show in downtown Wichita. Ocie’s retina tore loose in the only eye he could see out of and he almost blind was in great pain. How Ocie and Tykie got home is still a mystery, but the family legend goes that Tykie added seeing eye dog to his repertoire and helped drive him home. Health problems continued for Ocie and when he was placed in a nursing home, Tykie was moved to be Betty’s hearing dog. No problem for Tykie, he still saw his friends at the post and continued to help with visitors at the door. The night of May 3, 1999, Betty and Tykie were in the bedroom watching TV when Tykie began hitting her with both front paws as he would if something were urgent. She said later she thought he wanted to go out. As she and the dog walked down the hall towards the back of the house, Tykie hit her again with his front paws with such urgency that she fell into a small coat closet. That small 2-by-2 closet became their refuge as that very second the roof of her house went off as the f4 tornado raced through the city. Betty acquired one small wound on her hand from a piece of flying glass as she pulled Tykie into the closet with her. Tykie was a hero that day and a lot of days after. He kept Betty going as she rebuilt her home and after her husband died April 15, 2000. Tykie had to be cared for so she had to take him outside and bring him inside. He attended weddings of grandchildren and funerals of Post friends. When Betty died February 17, 2002 Tykie’s life changed again. IHD gave approval for his transfer and retirement to Betty and Ocie’s grandson, Brian Laird, who has a similar hearing loss to his grandfather. A few days after the funeral Tykie flew to his new home in Rutherford, NJ where he was able to take long walks for a couple of years before moving back to the Kansas City area. He was still full of adventure. He was written up in a book about service dogs and his story of the tornado and his picture appeared. He spent weekends at Brian’s mother’s farm to get muddy and be afraid of cats and chickens. He also took on an odyssey as he slipped from his fenced yard in Lenexa one day and walked more than seven miles in Overland Park traffic before being found by a good Samaritan who called IHD to find out where he belonged. Tykie was deaf for about the last two years of his long life and became blind as well, but he continued to strive to please. Tykie was 16 years and 4 months when he was cremated. His ashes were scattered on the graves of Betty and Ocie Sims at Greenwood Cemetery west of Wichita on the afternoon of March 21, 2010, with about a dozen family and Post 401 members. It is still the rule. Service dogs are the only dogs allowed inside the Post home. Submitted by Linda Laird, daughter of Betty and Ocie and mother of Brian Laird.

  Read the article

• Cant correctly install Lazarus

  - by user206316

  I have a little problem with installing and running Lazarus. I just upgrade ubuntu from 13.04 to 13.10. When i had 13.04, i could install lazarus without any problems, but in 13.10 lazarus magicaly dissapeared, and when i tried install it from ubuntu software center, it said something like in my software resources lazarus-ide-0.9.30.4 doesnt exist. After some research on net i tried delete all files from earlier installations, download deb packages from sourceforge and install them, but when i want to instal fpc-src, error shows up with output: (Reading database ... 100% (Reading database ... 239063 files and directories currently installed.) Unpacking fpc-src (from .../Stiahnut/Lazarus/fpc-src.deb) ... dpkg: error processing /home/richi/Stiahnut/Lazarus/fpc-src.deb (--install): trying to overwrite '/usr/share/fpcsrc/2.6.2/rtl/nativent/tthread.inc', which is also in package fpc-source-2.6.2 2.6.2-5 dpkg-deb (subprocess): decompressing archive member: internal gzip write error: Broken pipe dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg-deb (subprocess): cannot copy archive member from '/home/richi/Stiahnut/Lazarus/fpc-src.deb' to decompressor pipe: failed to write (Broken pipe) when i started lazarus, it of course tell me that it cant find fpc compier and fpc sources. So, please, i really need program for school and i dont wanna reinstall os anymore or something like that :( (Ubuntu 13.10 64bit) P.S: im not skilled in linux so if u know some commands to fix it just write them for copy and paste :) P.P.S:Sorry for bad English, im Slovak xD P.P.P.S: Thank so much for any answers update: output from sudo dpkg -l | grep "^rc" richi@Richi-Ubuntu:~/lazarus1.0.12$ sudo dpkg -l | grep "^rc" rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 amd64 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc appmenu-gtk3:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc fp-compiler-2.6.0 2.6.0-9 amd64 Free Pascal - compiler rc fp-utils-2.6.0 2.6.0-9 amd64 Free Pascal - utilities rc lazarus-ide-0.9.30.4 0.9.30.4-4 amd64 IDE for Free Pascal - common IDE files rc lazarus-ide-1.0.10 1.0.10+dfsg-1 amd64 IDE for Free Pascal - common IDE files rc lcl-utils-0.9.30.4 0.9.30.4-4 amd64 Lazarus Components Library - command line build tools rc lcl-utils-1.0.10 1.0.10+dfsg-1 amd64 Lazarus Components Library - command line build tools rc libbamf3-1:amd64 0.4.0daily13.06.19~13.04-0ubuntu1 amd64 Window matching library - shared library rc libboost-filesystem1.49.0 1.49.0-4 amd64 filesystem operations (portable paths, iteration over directories, etc) in C++ rc libboost-signals1.49.0 1.49.0-4 amd64 managed signals and slots library for C++ rc libboost-system1.49.0 1.49.0-4 amd64 Operating system (e.g. diagnostics support) library rc libboost-thread1.49.0 1.49.0-4 amd64 portable C++ multi-threading rc libbrlapi0.5:amd64 4.4-8ubuntu4 amd64 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 amd64 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 amd64 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 amd64 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 amd64 Utility library for evolution data servers rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 amd64 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 amd64 Backend library for evolution calendars rc libgc1c3:amd64 1:7.2d-0ubuntu5 amd64 conservative garbage collector for C and C++ rc libgd2-xpm:amd64 2.0.36~rc1~dfsg-6.1ubuntu1 amd64 GD Graphics Library version 2 rc libgd2-xpm:i386 2.0.36~rc1~dfsg-6.1ubuntu1 i386 GD Graphics Library version 2 rc libgnome-desktop-3-4 3.6.3-0ubuntu1 amd64 Utility library for loading .desktop files - runtime files rc libgphoto2-2:amd64 2.4.14-2 amd64 gphoto2 digital camera library rc libgphoto2-2:i386 2.4.14-2 i386 gphoto2 digital camera library rc libgphoto2-port0:amd64 2.4.14-2 amd64 gphoto2 digital camera port library rc libgphoto2-port0:i386 2.4.14-2 i386 gphoto2 digital camera port library rc libgtksourceview-3.0-0:amd64 3.6.3-0ubuntu1 amd64 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 amd64 GWeather shared library rc libharfbuzz0:amd64 0.9.13-1 amd64 OpenType text shaping engine rc libibus-1.0-0:amd64 1.4.2-0ubuntu2 amd64 Intelligent Input Bus - shared library rc libical0 0.48-2 amd64 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 amd64 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 ISC Shared Library used by BIND rc libkms1:amd64 2.4.46-1 amd64 Userspace interface to kernel DRM buffer management rc libllvm3.2:i386 1:3.2repack-7ubuntu1 i386 Low-Level Virtual Machine (LLVM), runtime library rc libmikmod2:amd64 3.1.12-5 amd64 Portable sound library rc libpackagekit-glib2-14:amd64 0.7.6-3ubuntu1 amd64 Library for accessing PackageKit using GLib rc libpoppler28:amd64 0.20.5-1ubuntu3 amd64 PDF rendering library rc libraw5:amd64 0.14.7-0ubuntu1.13.04.2 amd64 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 amd64 support library for the rhythmbox music player rc libsdl-mixer1.2:amd64 1.2.12-7ubuntu1 amd64 Mixer library for Simple DirectMedia Layer 1.2, libraries rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 amd64 SNMP (Simple Network Management Protocol) library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 amd64 Ubuntu One synchronization daemon library rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 amd64 Core library for the Unity interface. rc libusb-0.1-4:i386 2:0.1.12-23.2ubuntu1 i386 userspace USB programming library rc libwayland0:amd64 1.0.5-0ubuntu1 amd64 wayland compositor infrastructure - shared libraries rc linux-image-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc screen-resolution-extra 0.15ubuntu1 all Extension for the GNOME screen resolution applet rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface.

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• Programmatically reuse Dynamics CRM 4 icons

  - by gperera

  The team that wrote the dynamics crm sdk help rocks! I wanted to display the same crm icons on our time tracking application for consistency, so I opened up the sdk help file, searched for 'icon', ignored all the sitemap/isv config entries since I know I want to get these icons programatically, about half way down the search results I see 'organizationui', sure enough that contains the 16x16 (gridicon), 32x32 (outlookshortcuticon) and 66x48 (largeentityicon) icons!To get all the entities, execute a retrieve multiple request. RetrieveMultipleRequest request = new RetrieveMultipleRequest{    Query = new QueryExpression    {        EntityName = "organizationui",        ColumnSet = new ColumnSet(new[] { "objecttypecode", "formxml", "gridicon" }),    }}; var response = sdk.Execute(request) as RetrieveMultipleResponse;Now you have all the entities and icons, here's the tricky part, all the custom entities in crm store the icons inside gridicon, outlookshortcuticon and largeentityicon attributes, the built-in entity icons are stored inside the /_imgs/ folder with the format of /_imgs/ico_16_xxxx.gif (gridicon), with xxxx being the entity type code. The entity type code is not stored inside an attribute of organizationui, however you can get it by looking at the formxml attribute objecttypecode xml attribute. response.BusinessEntityCollection.BusinessEntities.ToList()    .Cast<organizationui>().ToList()    .ForEach(a =>    {        try        {            // easy way to check if it's a custom entity            if (!string.IsNullOrEmpty(a.gridicon))            {                byte[] gif = Convert.FromBase64String(a.gridicon);            }            else            {                // built-in entity                if (!string.IsNullOrEmpty(a.formxml))                {                    int start = a.formxml.IndexOf("objecttypecode=\"") + 16;                    int end = a.formxml.IndexOf("\"", start);                     // found the entity type code                    string code = a.formxml.Substring(start, end - start);                    string url = string.Format("/_imgs/ico_16_{0}.gif", code);Enjoy!

  Read the article

• Installing SOA Suite 11.1.1.3

  - by James Taylor

  With the release of Oracle SOA Suite 11.1.1.3 last week (28 April 2010) I thought I would attempt to implement a complete SOA Environment with SOA Suite, BPM and OSB on the WLS infrastructure. One major point of difference with the 11.1.1.3 is that is is released as a point release so you must have 11.1.1.2 installed first, then upgrade to 11.1.1.3. This post is performing the upgrade on Linux, if upgrading on windows you will need to substitute the directories and files accordingly. This post assumes that you have SOA Suite 11.1.1.2 installed already. 1. Download 11.1.1.3 software from the following site: http://www.oracle.com/technology/software/products/middleware/htdocs/fmw_11_download.html WLS 11.1.1.3   RCU 11.1.1.3 SOA Suite 11.1.1.3 OSB 11.1.1.3 Copy files to a staging area. For the purpose of this document the staging area is: /u01/stage  2. Shutdown your existing SOA Suite 11.1.1.2 environment 3. Execute the WLS 11.1.1.3 install from the stage directory. wls1033_linux32.bin 4. Choose the existing 11.1.1.2 Middleware Home 5. Ignore the security update notification 6. Accept the default products to be upgraded. 7. Upgrade of WebLogic has been completed   8. Upgrade the SOA Suite database schemas using the RCU utility. Unzip the RCU utility into the staging area and run the install ./u01/stage/rcuHome/bin/rcu 9. Drop the existing Repository and provide connection details 9. Install SOA Suite patch set 11.1.1.3. Unzip the SOA Suite patchset and execute the runInstaller with the following command. ./u01/stage/Disk1/runInstaller –jreLoc $MW_HOME/jdk160_18/jre 10. Choose the existing 11.1.1.2 middleware home 11. Start Install 12. Your SOA Suite Install should now be completed. Now we need to update the database repository. Login to SQLPlus as sysdba and execute the following command. SELECT version, status FROM schema_version_registry where owner = 'DEV_SOAINFRA'; the result should be similar to this: VERSION                        STATUS      OWNER ------------------------------ ----------- ------------------------------ 11.1.1.2.0                     VALID       DEV_SOAINFRA As you can see the version if these repositories are still at 11.1.1.2. 13. To upgrade these versions you have 2 options. 1 install via RCU, but this will remove any existing services. The second option is to use the Patch Set Assistant. From the $MW_HOME directory run the following command ./Oracle_SOA1/bin/psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_SOAINFRA 14. Install OSB. For the OSB install I did not install the IDE, or the Examples. run the runInstaller from the command line, unzip the OSB download to the stage area. ./u01/stage/osb/Disk1/runInstaller –jreLoc $MW_HOME/jdk160_18/jre 15. Choose Custom Install NOT to install the IDE (Eclipse) or Examples. 16. Unselect the, Examples and IDE checkboxes. 17. Accept the defaults and start installing. 18. Once the install has been completed configure the domain by running the Configuration Wizard. $MW_HOME/oracle_common/common/bin/config.sh You can create a new domain. In this document I will extend the soa_domain. 19. Select the following from the check list. I have selected the BPM Suite, this is unrelated to OSB but wanted it for my development purposes. To use this functionality additional license are required. 20. Configure the database connectivity. 21. Configure the database connectivity for the OSB schema. 22. Accept the defaults if installing on standard machine, if you require a cluster or advanced configuration then choose the option for you. 23. Upgrade is complete and OSB has been installed. Now you can start your environment.

  Read the article

• WP7 “Phantom Data” Source Possibly Revealed?

  - by Bil Simser

  Recently there’s been rumours floating around regarding “phantom” Windows Phone 7 data being magically sent and received on the latest WP7 phones. The news has mostly been floating around twitter so I didn’t pay it much attention. The BBC Technology News picked it up so I thought I would look more into it myself seeing that we have WP7 phones and maybe there was some truth to all this (and more importantly what was the cause). Full disclosure. I don’t have a lot of data points around this. This is from looking at a few phone logs, changing the configuration and looking back again after the change. I haven’t done a clean baseline test nor have I done testing with hundreds of phones. I leave the experience up to the reader to decide. So I went spelunking into the phone logs to see what was up. Most providers will show you data usage, at least on a daily basis. I lucked out with the provider and plan in that they provide hourly breakdowns. Here’s a snapshot from my usage throughout one night. Timestamp Data Usage 12:38:30 AM 2098 Kilobytes 1:30:30 AM 2 Kilobytes 2:38:30 AM 7118 Kilobytes 3:38:30 AM 6622 Kilobytes 4:38:30 AM 76 Kilobytes 5:38:30 AM 29 Kilobytes 6:38:30 AM 19 Kilobytes 7:38:30 AM 20 Kilobytes So a few observations from this data: Data seems to be collected on a regular basis. Looking at some other people phone logs, the times vary but it’s always hourly. There’s not a tremendous amount of data here (about 16 megabytes) but it seems like a lot for 7 hours The phone was connected to my home Wifi during this period Nothing was running and the phone was in a locked state Like I said, not a lot of data but it adds up. 16MB for 7 hours = about 50MB in a 24 hour period. That’s just plain old data being collected (somewhere, somehow) and not actual usage (Marketplace, Email, Browsing, etc.). Besides, when connected to a WiFi network you shouldn’t be charged data usage from your phone company (in theory, YMMV). After reviewing the logs I made a theory that the only thing that could possibly be sending data is the Feedback feature. With no other apps running under lock, what else could it be? In Windows 7 under your Settings the last option is Feedback. This sends feedback to Microsoft to “help improve Windows Phone”. On this page you have three options: Send feedback and use my cellular data connection Send feedback and (presumably) use my WiFi connection Don’t send feedback Knowing what I know about Microsoft, they do use the feedback data. For example some of the placement and inclusion of features in Office 2007 was based on that Feedback data that Office sends (assuming you had opted in). However in the Privacy Statement (it’s long but a good read at least once in your life), the Phone manual, and every other source I could look at there is no information about how much data it’s planning to send, just that it’s sending some data and that “some data charges with your carrier may apply”. Looking back at the logs, I have to wonder. 6MB at 3:30 and *then* 7MB the next hour. That’s a lot of information. And it adds up. 50MB in a 24 hour period X 30 days puts most people over a normal 1GB plan. And frankly why am I paying for a data plan only to have 80% of it chewed up by Microsoft, with no real benefit to me. If they included porn in the 50mb daily transfer I’d be okay with this, but I don’t see any new movies on my phone. So I turned it off. Set Feedback to disabled and wait. I waited. And waited. And generally didn’t use the phone if I could. The next day I went back to look at the data usage logs from the time period after turning the feedback mechanism off. Here are the results. Timestamp Data Usage 1:19:48 PM 0 Kilobytes 2:19:48 PM 0 Kilobytes 3:19:48 PM 0 Kilobytes 4:19:48 PM 678 Kilobytes (took a phone call) 5:19:48 PM 82 Kilobytes 6:19:48 PM 88 Kilobytes 7:20:30 PM 86 Kilobytes (guess they changed their reporting time) 8:20:30 PM 86 Kilobytes 9:20:30 PM 66 Kilobytes 10:20:30 PM 67 Kilobytes 11:20:30 PM 49 Kilobytes 12:20:30 AM 32 Kilobytes 1:20:30 AM 38 Kilobytes 2:20:31 AM 18 Kilobytes 3:20:31 AM 27 Kilobytes 4:20:31 AM 86 Kilobytes 5:20:31 AM 53 Kilobytes 6:20:31 AM 22 Kilobytes 7:22:15 AM 30 Kilobytes (another reporting time change) 8:22:15 AM 29 Kilobytes 9:22:15 AM 74 Kilobytes 10:22:15 AM 154 Kilobytes (phone call) 11:22:15 AM 12 Kilobytes 12:13:27 PM 49 Kilobytes 1:13:27 PM 197 Kilobytes (phone call) Quite a *drastic* change from what Feedback was turned on. I mean for a 24 hour period (sans 3 phone calls) I consumed about 1MB. Still quite a bit of transfer going on but at least it amounts to 30MB per month, not 30MB per day! Like I said this observation is neither scientific or conclusive. You decide what to do but frankly until Microsoft makes this data transfer exempt from your data plan (like that will happen) I would just turn Feedback off. YMMV.

  Read the article

• On Life and TechEd&hellip;

  - by MOSSLover

  I haven’t been writing here I know.  I am very sorry, but I am just too busy trying to make my personal life just as good as my SharePoint life.  So I was at TechEd again helping with the hands on labs, but I had a very long couple of weeks.  I will have a long week again.  I started out going to my friend, Randy Walker’s, wedding and I ended up at my grandmother’s condo in Fort Lauderdale.  It was a very trying week.  I had to drive 5 1/2 hours to the wedding from St. Louis and back.  So Randy is an awesome person.  He is a great guy and he was the first person ever to nominate me for MVP.  I knew it probably wasn’t going anywhere, but it was the thought that count.  I met Randy in 2008 at Tulsa Techfest.  We had fun jamming out to Rockband.  I knew he was good people back then.  He has let me vent and I have let him vent over countless personal problems.  He has always been a great friend.  So it was a no brainer when I decided to go to his wedding no matter how much driving or stress or lack of sleep it was worth it.  I am incredibly happy for him to finally find a diamond amongst a lot of coal.  To take part in his celebration was so awesome.  I thank him again for letting me participate in this ceremony. Now after Randy’s wedding I drove 5 1/2 hours landed in St. Louis, fed a cat an asthma pill hidden in wet cat food, and slept for 4 hours.  I immediately saw my best friend who dropped me off at the airport and proceeded to TechEd.  I slept 1 hour on each flight, then ended up working a 3 hour shift at TechEd.  The rest of the week was a haze of connecting with people and sleeping very little.  I got to see my friend Tasha and her husband Casey plus a billion other people.  It was a great week and then I got a call from my grandmother.  It turns out her husband was admitted to the hospital. My grandparents on my dad's side have been divorced since the 60s, which means I never got to see them together.  I always felt like they never cliqued.  When I was a kid we would always spend half our time in Chicago at grandma’s and half our time at grandpa’s houses.  We would hang out with my grandpa’s wife Bobbi and my grandma’s husband Leo.  My cousin’s always called Leo by Pappa and my brother and I would use Leo.  My cousins lived in Chicago up until my cousin Gavi was born then they moved to Philadelphia.  I remember complaining to my dad that we never visited anywhere cool just Chicago and Kansas City.  I also remember Leo teaching me and my brother, Sam, how to climb a tree and play tennis on the back of the apartment wall.  My grandfather’s was kind of stuffy and boring, but we always enjoyed my grandmother’s.  She had games and Disney Movies and toys.  Leo always made it a ton of fun to visit.  I’m not sure a lot of people knew this fact, but when I was 16 years old I saw my grandfather on my mother’s side slowly die of congestive heart failure in a nursing home.  When I was 18 I saw my grandmother on my mother’s side slowly die of an infection over a 30 day period.  I hate hospitals and I hate nursing homes, but sometimes you have to suck in your gut and be strong.  I tried to do that this weekend and I hope I did an ok job.  I really hope things get better, but if they don’t I really appreciate everything he has given me in life.  I am a terrible tennis player and I haven’t climbed a tree in ages, but they both encouraged me when encouragement from my parents was lacking.  It was Father’s Day today and I have to at least pay tribute to Leo Morris, because he has been a good person to me all my life.  Technorati Tags: TechEd,Grandparents,Father's Day

  Read the article

• ISO Files to USB &ndash; The Cheap and Easy Way

  - by RonGarlit

  (DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

  Read the article

• RIDC Accelerator for Portal

  - by Stefan Krantz

  What is RIDC?Remote IntraDoc Client is a Java enabled API that leverages simple transportation protocols like Socket, HTTP and JAX/WS to execute content service operations in WebCenter Content Server. Each operation by design in the Content Server will execute stateless and return a complete result of the request. Each request object simply specifies the in a Map format (key and value pairs) what service to call and what parameters settings to apply. The result responded with will be built on the same Map format (key and value pairs). The possibilities with RIDC is endless since you can consume any available service (even custom made ones), RIDC can be executed from any Java SE application that has any WebCenter Content Services needs. WebCenter Portal and the example Accelerator RIDC adapter frameworkWebCenter Portal currently integrates and leverages WebCenter Content Services to enable available use cases in the portal today, like Content Presenter and Doc Lib. However the current use cases only covers few of the scenarios that the Content Server has to offer, in addition to the existing use cases it is not rare that the customer requirements requires additional steps and functionality that is provided by WebCenter Content but not part of the use cases from the WebCenter Portal.The good news to this is RIDC, the second good news is that WebCenter Portal already leverages the RIDC and has a connection management framework in place. The million dollar question here is how can I leverage this infrastructure for my custom use cases. Oracle A-Team has during its interactions produced a accelerator adapter framework that will reuse and leverage the existing connections provisioned in the webcenter portal application (works for WebCenter Spaces as well), as well as a very comprehensive design patter to minimize the work involved when exposing functionality. Let me introduce the RIDCCommon framework for accelerating WebCenter Content consumption from WebCenter Portal including Spaces. How do I get started?Through a few easy steps you will be on your way, Extract the zip file RIDCCommon.zip to the WebCenter Portal Application file structure (PortalApp) Open you Portal Application in JDeveloper (PS4/PS5) select to open the project in your application - this will add the project as a member of the application Update the Portal project dependencies to include the new RIDCCommon project Make sure that you WebCenter Content Server connection is marked as primary (a checkbox at the top of the connection properties form) You should by this stage have a similar structure in your JDeveloper Application Project Portal Project PortalWebAssets Project RIDCCommon Since the API is coming with some example operations that has already been exposed as DataControl actions, if you open Data Controls accordion you should see following: How do I implement my own operation? Create a new Java Class in for example com.oracle.ateam.portal.ridc.operation call it (GetDocInfoOperation) Extend the abstract class com.oracle.ateam.portal.ridc.operation.RIDCAbstractOperation and implement the interface com.oracle.ateam.portal.ridc.operation.IRIDCOperation The only method you actually are required to implement is execute(RIDCManager, IdcClient, IdcContext) The best practice to set object references for the operation is through the Constructor, example below public GetDocInfoOperation(String dDocName)By leveraging the constructor you can easily force the implementing class to pass right information, you can also overload the Constructor with more or less parameters as required Implement the execute method, the work you supposed to execute here is creating a new request binder and retrieve a response binder with the information in the request binder.In this case the dDocName for which we want the DocInfo Secondly you have to process the response binder by extracting the information you need from the request and restore this information in a simple POJO Java BeanIn the example below we do this in private void processResult(DataBinder responseData) - the new SearchDataObject is a Member of the GetDocInfoOperation so we can return this from a access method. Since the RIDCCommon API leverage template pattern for the operations you are now required to add a method that will enable access to the result after the execution of the operationIn the example below we added the method public SearchDataObject getDataObject() - this method returns the pre processed SearchDataObject from the execute method  This is it, as you can see on the code below you do not need more than 32 lines of very simple code 1: public class GetDocInfoOperation extends RIDCAbstractOperation implements IRIDCOperation { 2: private static final String DOC_INFO_BY_NAME = "DOC_INFO_BY_NAME"; 3: private String dDocName = null; 4: private SearchDataObject sdo = null; 5: 6: public GetDocInfoOperation(String dDocName) { 7: super(); 8: this.dDocName = dDocName; 9: } 10:   11: public boolean execute(RIDCManager manager, IdcClient client, 12: IdcContext userContext) throws Exception { 13: DataBinder dataBinder = createNewRequestBinder(DOC_INFO_BY_NAME); 14: dataBinder.putLocal(DocumentAttributeDef.NAME.getName(), dDocName); 15: 16: DataBinder responseData = getResponseBinder(dataBinder); 17: processResult(responseData); 18: return true; 19: } 20: 21: private void processResult(DataBinder responseData) { 22: DataResultSet rs = responseData.getResultSet("DOC_INFO"); 23: for(DataObject dobj : rs.getRows()) { 24: this.sdo = new SearchDataObject(dobj); 25: } 26: super.setMessage(responseData.getLocal(ATTR_MESSAGE)); 27: } 28: 29: public SearchDataObject getDataObject() { 30: return this.sdo; 31: } 32: } How do I execute my operation? In the previous section we described how to create a operation, so by now you should be ready to execute the operation Step one either add a method to the class  com.oracle.ateam.portal.datacontrol.ContentServicesDC or a class of your own choiceRemember the RIDCManager is a very light object and can be created where needed Create a method signature look like this public SearchDataObject getDocInfo(String dDocName) throws Exception In the method body - create a new instance of GetDocInfoOperation and meet the constructor requirements by passing the dDocNameGetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName) Execute the operation via the RIDCManager instance rMgr.executeOperation(docInfo) Return the result by accessing it from the executed operationreturn docInfo.getDataObject() 1: private RIDCManager rMgr = null; 2: private String lastOperationMessage = null; 3:   4: public ContentServicesDC() { 5: super(); 6: this.rMgr = new RIDCManager(); 7: } 8: .... 9: public SearchDataObject getDocInfo(String dDocName) throws Exception { 10: GetDocInfoOperation docInfo = new GetDocInfoOperation(dDocName); 11: boolean boolVal = rMgr.executeOperation(docInfo); 12: lastOperationMessage = docInfo.getMessage(); 13: return docInfo.getDataObject(); 14: }   Get the binaries! The enclosed code in a example that can be used as a reference on how to consume and leverage similar use cases, user has to guarantee appropriate quality and support.  Download link: https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/RIDCCommon.zip RIDC API Referencehttp://docs.oracle.com/cd/E23943_01/apirefs.1111/e17274/toc.htm

  Read the article

• World Record Oracle Business Intelligence Benchmark on SPARC T4-4

  - by Brian

  Oracle's SPARC T4-4 server configured with four SPARC T4 3.0 GHz processors delivered the first and best performance of 25,000 concurrent users on Oracle Business Intelligence Enterprise Edition (BI EE) 11g benchmark using Oracle Database 11g Release 2 running on Oracle Solaris 10. A SPARC T4-4 server running Oracle Business Intelligence Enterprise Edition 11g achieved 25,000 concurrent users with an average response time of 0.36 seconds with Oracle BI server cache set to ON. The benchmark data clearly shows that the underlying hardware, SPARC T4 server, and the Oracle BI EE 11g (11.1.1.6.0 64-bit) platform scales within a single system supporting 25,000 concurrent users while executing 415 transactions/sec. The benchmark demonstrated the scalability of Oracle Business Intelligence Enterprise Edition 11g 11.1.1.6.0, which was deployed in a vertical scale-out fashion on a single SPARC T4-4 server. Oracle Internet Directory configured on SPARC T4 server provided authentication for the 25,000 Oracle BI EE users with sub-second response time. A SPARC T4-4 with internal Solid State Drive (SSD) using the ZFS file system showed significant I/O performance improvement over traditional disk for the Web Catalog activity. In addition, ZFS helped get past the UFS limitation of 32767 sub-directories in a Web Catalog directory. The multi-threaded 64-bit Oracle Business Intelligence Enterprise Edition 11g and SPARC T4-4 server proved to be a successful combination by providing sub-second response times for the end user transactions, consuming only half of the available CPU resources at 25,000 concurrent users, leaving plenty of head room for increased load. The Oracle Business Intelligence on SPARC T4-4 server benchmark results demonstrate that comprehensive BI functionality built on a unified infrastructure with a unified business model yields best-in-class scalability, reliability and performance. Oracle BI EE 11g is a newer version of Business Intelligence Suite with richer and superior functionality. Results produced with Oracle BI EE 11g benchmark are not comparable to results with Oracle BI EE 10g benchmark. Oracle BI EE 11g is a more difficult benchmark to run, exercising more features of Oracle BI. Performance Landscape Results for the Oracle BI EE 11g version of the benchmark. Results are not comparable to the Oracle BI EE 10g version of the benchmark. Oracle BI EE 11g Benchmark System Number of Users Response Time (sec) 1 x SPARC T4-4 (4 x SPARC T4 3.0 GHz) 25,000 0.36 Results for the Oracle BI EE 10g version of the benchmark. Results are not comparable to the Oracle BI EE 11g version of the benchmark. Oracle BI EE 10g Benchmark System Number of Users 2 x SPARC T5440 (4 x SPARC T2+ 1.6 GHz) 50,000 1 x SPARC T5440 (4 x SPARC T2+ 1.6 GHz) 28,000 Configuration Summary Hardware Configuration: SPARC T4-4 server 4 x SPARC T4-4 processors, 3.0 GHz 128 GB memory 4 x 300 GB internal SSD Storage Configuration: "> Sun ZFS Storage 7120 16 x 146 GB disks Software Configuration: Oracle Solaris 10 8/11 Oracle Solaris Studio 12.1 Oracle Business Intelligence Enterprise Edition 11g (11.1.1.6.0) Oracle WebLogic Server 10.3.5 Oracle Internet Directory 11.1.1.6.0 Oracle Database 11g Release 2 Benchmark Description Oracle Business Intelligence Enterprise Edition (Oracle BI EE) delivers a robust set of reporting, ad-hoc query and analysis, OLAP, dashboard, and scorecard functionality with a rich end-user experience that includes visualization, collaboration, and more. The Oracle BI EE benchmark test used five different business user roles - Marketing Executive, Sales Representative, Sales Manager, Sales Vice-President, and Service Manager. These roles included a maximum of 5 different pre-built dashboards. Each dashboard page had an average of 5 reports in the form of a mix of charts, tables and pivot tables, returning anywhere from 50 rows to approximately 500 rows of aggregated data. The test scenario also included drill-down into multiple levels from a table or chart within a dashboard. The benchmark test scenario uses a typical business user sequence of dashboard navigation, report viewing, and drill down. For example, a Service Manager logs into the system and navigates to his own set of dashboards using Service Manager. The BI user selects the Service Effectiveness dashboard, which shows him four distinct reports, Service Request Trend, First Time Fix Rate, Activity Problem Areas, and Cost Per Completed Service Call spanning 2002 to 2005. The user then proceeds to view the Customer Satisfaction dashboard, which also contains a set of 4 related reports, drills down on some of the reports to see the detail data. The BI user continues to view more dashboards – Customer Satisfaction and Service Request Overview, for example. After navigating through those dashboards, the user logs out of the application. The benchmark test is executed against a full production version of the Oracle Business Intelligence 11g Applications with a fully populated underlying database schema. The business processes in the test scenario closely represent a real world customer scenario. See Also SPARC T4-4 Server oracle.com OTN Oracle Business Intelligence oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN WebLogic Suite oracle.com OTN Oracle Solaris oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 30 September 2012.

  Read the article

• BI&EPM in Focus June 2014

  - by Mike.Hallett(at)Oracle-BI&EPM

  Applications Webcast Centre – A Library of Discussion and Research for Best Practice: Achieving Reliable Planning, Budgeting and Forecasting Talent Analytics and Big Data – Is HR ready for the challenge Enterprise Data – The cost of non-quality Customers Josephine Niemiec from ADP talks about Oracle Hyperion Workforce Planning at Collaborate 2014 (link) Video Chris Nelms from Ameren talks about Oracle BI Spend and Procurement Analytics at Collaborate 2014 (link) Video Leggett & Platt Leverages Oracle Hyperion EPM and Demantra (link) Video Pella Corporation Accelerates Close Cycle by Cutting Time for Financial Consolidation from Three Days to Less Than One Day (link) Secretaría General de Administración de Justicia en España Enhances Citizen Services with Near-Real-Time Business Intelligence Gleaned from 500 Databases  (link) Bellco Credit Union Speeds Budget Development by 30%—Gains Insight into Specific Branch and Financial Product Profitability  (link)  Video QDQ media Speeds up Financial Reporting by 24x, Gains Business Agility, and Integrates Seamlessly into Corporate Accounting System  (link) Westfield Group Maximizes Shopping Mall Revenue, Shortens Year-End Financial Consolidation by 75%  (link)  IL&FS Transportation Networks Shortens Financial Consolidation and Reporting Cycle by Eight Days, Gains In-Depth Insight into Business Performance   (link) Angel Trains Optimizes Rail Operations for Purchasing, Sourcing, and Project Management to Meet Challenges of Evolving Rail Industry  (link) Enterprise Performance Management June 11, at Oracle Utrecht, NL: Morning session: Explore Planning and Budgeting in the Cloud (link) June 12, London: PureApps Presents: Best Practice Financial Consolidation and Reporting Workshop (link) July 3, Koln: Oracle Hyperion Business Analytics Roundtable (link) Blog: What's Your Tax Strategy? Automate the Operational Transfer Pricing Process (link) YouTube Video: Automate Tax Reporting with Oracle Hyperion Tax Provision (link) YouTube Video: Introducing Oracle Hyperion Planning’s Tablet Optimized Interface (link) OracleEPMWebcasts @ YouTube (link) Partner webcasts: Wednesday, 4 June, 5.00 GMT - Case Study:  Lessons Learned from Edgewater Ranzal's Internal Implementation of Oracle Planning & Budgeting Cloud Service (PBCS) - Learn more and register here! Thursday, 5 June, 4.00 GMT - Achieving Accountable Care Using Oracle Technology - Learn more and register here! Tuesday, 17 June, 4.00 GMT - Optimizing Performance for Oracle EPM Systems - Learn more and register here! Oracle University Blog: The Coolest Features Available with Oracle Hyperion 11.1.2.3 – Training from OU to help you to best use them (link) Support: Proactive Support: EPM Hyperion Planning 11.1.2.3.500 Using RMI Service [Blog] Proactive Support: Planning and Budgeting Cloud Service Videos (link) Planning and Budgeting Cloud Service (PBCS) 11.1.2.3.410 Patch Bundle [Doc ID 1670981.1] Hyperion Analytic Provider Services 11.1.2.2.106 Patch Set Update [Doc ID 1667350.1] Hyperion Essbase 11.1.2.2.106 Patch Set Update [Doc ID 1667346.1] Hyperion Essbase Administration Services 11.1.2.2.106 Patch Set Update [Doc ID 1667348.1] Hyperion Essbase Studio 11.1.2.2.106 Patch Set Update [Doc ID 1667329.1] Hyperion Smart View 11.1.2.5.210 Patch Set Update [Doc ID 1669427.1] Using HPCM, HSF or DRM Communities (link) Business Intelligence June 12, Birmingham, UK: Oracle Big Data at Work - Use Cases and Architecture (link) June 17, London: Oracle at Cloud & Big Data World Forums (link) June 17, Partner Webcast: Transform your Planning Capabilities with Peloton's CloudAccelerator for Oracle PBCS (link) June 19, London: Oracle at the Whitehall Media Big Data Analytics Conference and Exhibition (link) June 19, London: Partner Event - Agile BI Conference by Peak Indicators [link] June 25, Munich: Oracle Special Day auf der TDWI 2014 Konferenz (link) July 15, London: Oracle Endeca Information Discovery Workshop (link) July 16, London: BI Applications Workshop – Financial Analytics & Procurement Analytics (link) July 17, London: BI Applications Workshop – HR Analytics (link) Milan, Italy: L’Osservatorio Big Data Analytics & Business Intelligence with Politecnico di Milano (link) OBIA 11.1.1.8.1 - Now Available [Blog] What’s New in OBIA 11.1.1.8.1 [Blog] BI Blog: A closer look at Oracle BI Applications 11.1.1.8.1 release (link) Press Release: BI Applications Deliver Greater Insight into Talent and Procurement (link) Support Blog: OBIA 11.1.1.8.1 Upgrade Guide & Documentation (link) YouTube Video: Glenn Hoormann of Ludus talks to us about Oracle Business Intelligence and ERP at Collaborate 2014 (Link) YouTube Video: Performance Architects talks about key BI and Mobile trends, including Endeca at Collaborate 2014 (link) Big Data Blog: 3 Keys for Using Big Data Effectively for Enhanced Customer Experience (link) Big Data Lite Demo VM 3.0 Now Available on OTN BI Blog: Data Relationship Governance - Workflow in a Bottle (link) MDM Blog: Register for Product Data Management Weekly Cloudcasts (link) MDM Blog: Improve your Customer Experience with High Quality Information (link) MDM Blog: Big Data Challenges & Considerations (link) Oracle University: Oracle BI Applications 11g: Implementation using ODI (link) Proactive Support: Monthly Index [Blog] My Oracle Support: Partner Accreditation for Business Analytics Support [Blog] OBIEE 11g Test-to-Production (T2P) / Clone Procedures Guide [Blog] Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >