jeff certain - Page 288

Issue with button text shifting

- by Fizz

I'm having this odd issue. I have these buttons where the button's text is shifted downward upon certain actions. For example, I have a spinner with choices and one of the choices makes some buttons invisible while others are made visible. When I choose these, the buttons made visible all have their text shifted downward. Nothing else is shifted, just the text on the buttons. I've tried this on 1.5 and it works fine, no text is shifted, but I have issues with 2.1 and I really cannot figure it out. Any ideas or help would be great. Thanks.

Read the article

Is there any valid reason radians are used as the inputs to trig function in many modern languages?

- by johnmortal

Is there any pressing reason trig functions should use radian inputs in modern programming languages? As far as I know radians are typically ugly to deal with except in three cases: (1) You want to compute an arc length and you know the angle of the arc and (2) You need to do symbolic calculus with trig functions (3) certain infinite series expansion look prettier if the input is in radians. None of these scenarios seem like a worthy justification for every programming language I am familiar with using radian inputs for Sin, Cos, Tangent, etc... The third one sounds good because it might mean one gets faster computations using radians (very slightly faster- the cost of one additional floating point multiplication ) , but I am dubious even of that because most commonly the developer had to take an extra step to put the angle in radians in the first place. The other two are ridiculous justifications for all the added obscurity.

Read the article

Strategy in storing ad-hoc numbers/constants?

- by Jiho Han

I have a need to store a number of ad-hoc figures and constants for calculation. These numbers change periodically but they are different type of values. One might be a balance, a money amount, another might be an interest rate, and yet another might be a ratio of some kind. These numbers are then used in a calculation that involve other more structured figures. I'm not certain what the best way to store these in a relational DB is - that's the choice of storage for the app. One way, I've done before, is to create a very generic table that stores the values as text. I might store the data type along with it but the consumer knows what type it is so, in situations I didn't even need to store the data type. This kind of works fine but I am not very fond of the solution. Should I break down each of the numbers into specific categories and create tables that way? For example, create Rates table, and Balances table, etc.?

Read the article

DWR and other possible tools for build java application level Ajax framework

- by Fazal

I would assume that this question would have been asked in different ways already, but I could not find one so posting it. Sorry if its a repetition The basic idea which I am trying to explore is to design a common Ajax framework/API for our application. The main requirement is to have a common framework in the product which every module in the application can call whenever it needs to provide Ajax behavior. We basically have a page based application and not everything would be Ajax for sure. Mostly it will be smaller pieces of work which Ajax will handle. We have used GWT and it works great. But we have some constraints because of which certain areas in the application need to build standard jsp and html pages only I know little bit about dwr and it looks very promising (as even answered by some people). I wanted to know what are the other possible frameworks like dwr which I can evaluate too, before making the decision

Read the article

Display using QtWebKit, whilst parsing xml

- by Beren Scott

I wish to use QtWebKit to load a url for display, but, that's the easy part, I can do that. What I wish to do is record / log xml as I go. My attention here is to record and database certain details on the fly, by recording those details. My problem is, how to do this all on the fly, without requesting the same url from the server twice, once for the xml, and the second time to view the url. My hope here, is to implement a very fast way of recording set data as the user passes over it. Take for example, rather then have to type out details displayed by a website, I wish to have those details chucked into a database as I the user views the website. Now, I am using QtWebKit, and I have everything pretty much solved viewing wise. I have a loadUrl() routine which calls load(url) inside the qwebview.h The problem is, how do I piggyback xml parsing on top of this?

Read the article

InnoDB or MyISAM - Why not both?

- by Skoder

Hey. I'm new to databases, and I've read various threads about which is better between InnoDB and MyISAM. It seems that the debates are to use or the other. Is it not possible to use both, depending on the table? What would be the disadvantages in doing this? As far as I can tell, the engine can be set during the CREATE TABLE command. Therefore, certain tables which are often read can be set to MyISAM, but tables that need transaction support can use InnoDB. I'm sure there must be a problem, otherwise this would be the ultimate answer :).

Read the article

Visual Studio: What approach do you use to 'template' plumbing for similiar projects?

- by Sosh

When building ASP.NET projects there is a certain amount of boilerplate, or plumbing that needs to be done, which is often identical across projects. This is especially the case with MVC and ALT.NET approaches. [I'm thinking of things such as: IoC, ORM, Solution structure (projects), Session Management, User Management, I18n etc.] I would like to know what approach you find best for 'reusing' this plumbing accross projects? Have a 'master solution' which you duplicate and rename somehow? (I'm using a this to a degree at the moment, but it's fairly messy. Would be interested how people do this 'better') Mainly rely on Shared Library projects? (I find this appropriate for some things, but too restrictive for things that have to be customised) Code generation tools, such as T4? (Similar to the approach used by SharpArchitecture - have not tried this myself) Something else? Thanks for sharing your experiences!

Read the article

Create slide-in notifications à la Outlook in Windows with .NET

- by Draak

I am using .NET and am creating a desktop app/service that will display notifications in the corner of my Desktop when certain events are triggered. I don't want to use a regular Message Box b/c that would be too intrusive. The notifications would slide into view and then fade out after a few seconds. I am thinking of something that will act very much like the Outlook alerts that one gets when a new message arrives. The question is: Should I use WPF for this? I've never done anything with WPF but will happily try it if that's best means to the end. Is there a way to accomplish this with regular .NET libraries?

Read the article

Selenium / FlashSelenium calling the wrong methods?

- by bug-a-lot

Seems like sometimes when Selenium should call a certain method, it instead calls another, as pointed out by the following log: 14:57:18.328 INFO - Command request: getEval[this.browserbot.findElement("someElement").doFlexClick('someIdOfAButton','');, ] on session 21708b0a4a154ebc96c9720c14578e74 14:57:18.343 INFO - Got result: OK,Error: Cannot type text into someIdOfAButton on session 21708b0a4a154ebc96c9720c14578e74 I've tried both Selenium server 1.0.3 and the 2.0 alpha 7 versions, they both display this behaviour. FlashSelenium is involved so I'm not sure where along the way lies the bug. Furthermore it's hard to reproduce as it doesn't happen only for some methods, and doesn't always happen. I've tried searching for issues similar to these but couldn't find any remotely similar... Anyone experienced the same behavior? And if so, is there a fix for it? Edit: I doubt FlashSelenium is at fault for this, as the log tells that the command arrives correctly at the server... But I can't seem to be able to follow the path of execution from the moment the Selenium server gets the command and passes over to the browser, to the moment where it gets the response.

Read the article

richfaces keepAlive not working

- by Jurgen H

I have a mediaOutput tag which, in its createContent attribute, requires the backing bean to be in a certain state. A list of values, which is filled in an init method, must be available. I therefore added a keepAlive tag for the whole backing bean. I now indeed see the backingBean in stead of some (richfaces) proxy bean, but the filled list is null again. How to make this possible? I checked that the init method was called and that the list is filled in in the init method. <a4j:keepAlive beanName="myBean" /> <a4j:mediaOutput createContent="#{myBean.writeChart}" ... /> The backing bean public class MyBean implements Serializable { public List list; public void init(ActionEvent event) { // call some resource to fill the list list = service.getItems(); } public void writeChart(final OutputStream out, final Object data) throws IOException { // list is null } // getters & setters }

Read the article

Calculating probability that a string has been randomized? - Python

- by RadiantHex

Hi folks, this is correlated to a question I asked earlier (question) I have a list of manually created strings such as: lucy87 gordan_king fancy_unicorn77 joplucky_kanga90 base_belong_to_narwhals and a list of randomized strings: johnkdf pancake90kgjd fancy_jagookfk manhattanljg What gives away that the last set of strings are randomized is that sequences such as 'kjg', 'jgf', 'lkd', ... . Any clever way I could separate strings that contain these apparently randomized strings from the crowd? I guess that this plays a lot on the fact that certain characters are more likely to be placed next to others (e.g. 'co', 'ka', 'ja', ...). Any ideas on this one? Kylotan mentioned Reverend, but I am not sure if it can be used fr such purpose. Help would be much appreciated!

Read the article

Handling Data Hierarchies in code

- by Miau

Hi there So, say I have a string to parse with a given format that maps to a tree like data structure. The string is kinda similar to a folder path, and the structure is similar to a file structure, except its got some rules so for something@cat1@otherSomething you would get /something/cat1/otherSomething for something@cat2@otherSomething you would get /something/cat2/otherSomething other examples /OtherThing/cat1/otherSomething/Blah /OtherThing/cat4/otherSomething Where something, cat1, otherSomethign, etc are some sort of instances of ICategory There are certain rules that control what subcategories are valid and which subcategories are not acceptable, at the moment I m considering a heavy Object hierachy, but I know this is not a flexible solution, I d prefer the categories to be a bit more general but again, since there are rules about what can go next I m not sure how to do this. An example of a rule can be: OtherThing can only have subcategories cat1 and cat4 ( anything else is invalid) An option would be to use some sort of convention based aproach to instantiate a particular class given a subsection of the string(like cat4) but it seems a bit too complex, I m all ears Thanks

Read the article

What is the difference between Window.load and document.readyState

- by prakash

Hi All, I have one question , In my ASP.NET MVC web application i have to do certain validation once page and all controls got loaded. In javascript i was using belwow line of code for calling a method. window.load = JavascriptFunctionName ; Some one from my team asked me not used above line of code Instead use JQuery to do the same document.attachEvent("onreadystatechange", function() { if (document.readyState === "complete") { CheckThis(); } }); Please help me in understanding what is the difference between two. When i tested by keeping alert in both Jquery check is executing first and calling the CheckThis function where as window.load is taking some time and executing after it. Please suggest

Read the article

Send post to a different domain using JS

- by Lior

Hello, I'd like a post request to be sent once a certain text input field is changed, using javascript. So here is my current code: <input name="message" onchange="$.ajax({type: \"POST\", url: \"http://example.com/example.php\", data: \"message=\" + document.getElementsByName(\"message\")[0].value});" /> Now, it's working on a regular connection, but it's not working on a secured connection (SSL). I mean, the page is secured, but the request is sent to a non secured page. Is there a solution?

Read the article

SQL Server Query Editors - any that warn of number of rows to be changed?

- by ciaranarcher

We're using SQL Server 2000 Query Analyser, and one issue we have is that very occasionally, when a user is updating our live database, they insert the incorrect/no(!) where clause. I know, not good, but it happens. Are there any editors that will warn of the number of rows that might be changed (if that is even possible) or even a way to configure an editor, if it is connected to a certain database, to prompt for confirmation before the query is run? We have a way to recover our data in the cases where we run an incorrect query, but it takes time, and I'm just seeing if there are any ways to catch the error, or at least give the user a second chance. Thanks in advance.

Read the article

Websphere Java application startup

- by Tom Barnett

I have two Java applications running on a Websphere application server. The first application is COTS software (Plateau) I will call App1 and includes an API which can be used in custom applications to interact with App1. This app takes a couple minutes to start in Websphere. The second application is custom software I will call App2 and is deployed as a web service which utilizes the App1 API to interact with App1; so it is dependent on App1. This app takes just seconds to start in Websphere. I run into a problem in certain App1 functionality when we bounce Websphere and the App2 web service is called by a client before the App1 application has fully started. Is there a way I can delay App2 from starting until App1 is fully started in Websphere? Is there a way to design App2 to programmatically check that App1 is available before it attempts to use the API?

Read the article

Confused with conditional and logical operators - VB.net

- by AgentRev

I'm kind of new to VB.net, and since I just finished a C# course, the lack of parentheses creates a lot of confusion on how to write certain combinations of operators. The C# equivalent of the line I am trying to reproduce in VB would be like this : if ( (a == 0 && b != null) || (a == 1 && c != null) ) I'm have no idea how to write this in VB, I've tried many combinations of And, Or, AndAlso, OrElse, etc. but I can't achieve the desired result. I can't find any clear example of C# v.s. VB.net comparison on operators, and the notes I have aren't helpful either. Can someone help me figure this out?

Read the article

Google Custom Search Engine not giving the expected search result.

- by iecut

Hi, I have been trying to create a new google custom search engine, but when I try some query,the search engine it is not giving me the expected search result.On some queries it is working fine, but on other queries, it says"no result". I tried adding the URL of the website that I wanted to search for, but there are certain pages and keywords that are not coming up in the search result when I try to search for the keyword of that page. I tired adding both the main page URL and the URL of the sub page that I want to search for, but nothing is working. There are some sub pages to the main URL that are coming in the search result.

Read the article

Eclipse hangs when rebuilding after the addition of an external JAR file.

- by celestialorb

I'm fairly new to Eclipse so if this is something simple I apologize, however when I attempt to add an external JAR file to my build path (specifically the "rt.jar" file which contains certain tools that I require) and then rebuild my project, Eclipse will hang at the end of the Build process. It'll get to 100% then just hang there using 100% of one of my CPU cores. At first I thought it may have been due to the relatively large size of the rt.jar file, but I tried using smaller JAR files and it still hung at 100%. Any help would be greatly appreciated! If there is something wrong with using the rt.jar file does anyone know of another JAR file that contains both tools for dealing with SOAP requests as well as XML/DOM manipulation? Thanks again!

Read the article

CPU/GPU Monitering. (Tempature, current speed, etc) in C#

- by Tommy

Im looking for a way to moniter system statistics, here are my main points of interest: CPU Tempature CPU speed, (Cycles per second) CPU Load (Idle percent) GPU Tempature Some other points of interest: Memory useage Network Load (Traffic Up/Down) My ultimate goal is to write an application that can be used for easily running in the backround, and allow setting many events fr certain actions, for instance When processer temp gets to 56C -> Do _Blank_ etc. So this leaves me two main points. Is there a framework already out there for this sort of thing? If No to #1, How can i go about doing this?

Read the article

How to block non-browser clients from submitting a request?

- by Thomas Kohl

I want to block non-browser clients from accessing certain pages / successfully making a request. The website content is served to authenticated users. What happens is that our user gives his credentials to our website to 3rd party - it can be another website or a mobile application - that performs requests on his behalf. Say there is a form that the user fills out and sends a message. Can I protect this form so that the server processing the submission can tell whether the user has submitted it directly from the browser or not? I don't want to use CAPTCHA for usability reasons. Can I do it with some javascript?

Read the article

WCF - (Custom) binary serialisation.

- by Barguast

I want to be able to query my database over the web, and I am wanting to use a WCF service to handle the requests and results. The problem is that due to the amount of data that can potentially be returned from these queries, I'm worried about how these results will be serialised over the network. For example, I can imagine the XML serialisation looking like: <Results> <Person Name="Adam" DateOfBirth="01/02/1985" /> <Person Name="Bob" DateOfBirth="04/07/1986" /> </Results> And the binary serialisation containing types names and other (unnecessary) metadata. Perhaps even the type name for each element in a collection? o_o Ideally, I'd like to perform the serialisation of certain 'DataContract'-s myself so I can make it super-compact. Does anyone know if this is possible, or of any articles which explain how to do custom serialisation with WCF? Thanks in advance

Read the article

Android Frame by Frame Animation problem on elements in a CursorAdapter

- by Pandalover

I am having trouble applying an animation to a View. I am trying to load the animation from inside the constructor of a CursorAdapter, so I can set it later assign it to certain children in the list. In the constructor I have : shineAnimation = AnimationUtils.loadAnimation(ctx, R.anim.news_list_item_shine); the animation is in my res/anim dir <?xml version="1.0" encoding="utf-8"?> <animation-list xmlns:android="http://schemas.android.com/apk/res/android" android:oneshot="true"> <item android:drawable="@drawable/shine1" android:duration="200" /> <item android:drawable="@drawable/shine2" android:duration="200" /> <item android:drawable="@drawable/shine3" android:duration="200" /> <item android:drawable="@drawable/shine4" android:duration="200" /> <item android:drawable="@drawable/shine5" android:duration="200" /> </animation-list> I'm getting an exception : Unknown animation name: animation-list Help would be much appreciated Thanks S

Read the article

MSSQL 2000 Stored Procedure to Split Shift Times

- by JClaspill

Read the article

Need SQL Server Stored Procedure for This Query

- by djshortbus

I have a ASPX.NET DataGrid and im trying to USE a select LIKE 'X'% from a table that has 1 field called location. im trying to display the locations that start with a certain letter (example wxxx,axxx,fxxx,) in different columns in my data grid. SELECT DISTINCT LM.LOCATION AS '0 LOCATIONS' , LM.COUNTLEVEL AS 'COUNTLEVEL' FROM SOH S WITH(NOLOCK) JOIN LOCATIONMASTER LM ON LM.LMID = S.LMID WHERE LM.COUNTLEVEL = 1 AND LM.LOCATION NOT IN ('RECOU','PROBLEM','TOSTOCK','PYXVLOC') AND LM.LOCATION LIKE '0%' SELECT DISTINCT LM.LOCATION AS 'A LOCATIONS' , LM.COUNTLEVEL AS 'COUNTLEVEL' FROM SOH S WITH(NOLOCK) JOIN LOCATIONMASTER LM ON LM.LMID = S.LMID WHERE LM.COUNTLEVEL = 1 AND LM.LOCATION NOT IN ('RECOU','PROBLEM','TOSTOCK','PYXVLOC') AND LM.LOCATION LIKE 'A%'

Search Results

Search found 11277 results on 452 pages for 'jeff certain'.

Page 288/452 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295 | Next Page >

- by Fizz

- by johnmortal

- by Jiho Han

- by Fazal

- by Beren Scott

- by Skoder

- by Sosh

- by Draak

- by bug-a-lot

- by Jurgen H

- by RadiantHex

- by Miau

- by prakash

- by Lior

- by ciaranarcher

- by Tom Barnett

- by AgentRev

- by iecut

- by celestialorb

- by Tommy

- by Thomas Kohl

- by Barguast

- by Pandalover

- by JClaspill

- by djshortbus

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295 | Next Page >