Search Results

Search found 7564 results on 303 pages for 'job scheduling'.

Page 288/303 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

• Postfix not sending/allowing receiving of messages after server (hardware) changed

  - by 537mfb

  We had na old notebook runing Ubuntu 12.04 working as a web/ftp/mail server and it worked but since the notebook was a notebook and pretty old and unreliable, a desktop was bought to replace it before it stopped working all together. Due to issues with the new desktop's vídeo card, we couldn't use Ubuntu 12.04 so we installed Ubuntu 13.10 and wen't about configuring it. Since we removed the notebook from the network, we kept the same Computer Name and local IP address to make things as close to the old server as possible configuration-wise. However, something has gone wrong since Postfix is throwing error 451 4.3.0 lookup faillure on every attempt to send a mail, and no email can be received either. Our main.cf file is a copy of the one we were using (and working) on the old server (notice we use EHCP) # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name powered by Easy Hosting Control Panel (ehcp) on Ubuntu, www.ehcp.net biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no myhostname = m21-traducoes.com.pt relayhost = mydestination = localhost, 89.152.248.139 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 89.152.248.0/24 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtp_use_tls = yes smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes debug_peer_list = sender_canonical_maps = debug_peer_level = 1 proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $mynetworks $virtual_mailbox_limit_maps $transport_maps alias_maps = hash:/etc/aliases smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtpd_destination_concurrency_limit = 2 smtpd_destination_rate_delay = 1s smtpd_extra_recipient_limit = 10 disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 This configuration was working before but now everytime i try to send a mail in squirrelmail it reports: Message not sent. Server replied: Requested action aborted: error in processing 451 4.3.0 <[email protected]>: Temporary lookup failure And i can't send mail to it from outsider either. Any ideas? EDIT: Here are some issues MXToolBox reports to my domain, answering hopefully to @Teun Vink: BlackList Mail Server Web Server DNS Error 4 0 2 0 Warnings 0 0 0 3 Passed 0 6 3 12 So the domain is on some blacklist, but that doesn't explain the error at all No mail server issues found (except it's not working) Those two web server errors it's because i don't have HTTPS workin (No SSL Certificate) so the test fails Those 3 DNS warnings we're already there when it was working with the other machine and are related to stuff i can't control: SOA Refresh Value is outside of the recommended range SOA Expire Value out of recommended range SOA NXDOMAIN Value too high I've searched and as far as i can tell only the guys who sold the retail can change those values and they won't. Edit2: I half solved the issue.on the new machine postfix was installed but postfix-mysql waasn't so he couldn't connect to the database (rookie mistake). After fixing that, i can now send mails to the outsider without any issues, however i am still not able to receive mails from utside. The sender doesn't get any message warning about the non-delivery but the message doesn't fall in the inbox and the log shows: Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: NOQUEUE: reject: RCPT from re lay4.ptmail.sapo.pt[212.55.154.24]: 451 4.3.5 <relay4.ptmail.sapo.pt[212.55.154. 24]>: Client host rejected: Server configuration error; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<sapo.pt> Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: disconnect from relay4.ptmail .sapo.pt[212.55.154.24]

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by user135501

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• Lustre - issues with simple setup

  - by ethrbunny

  Issue: I'm trying to assess the (possible) use of Lustre for our group. To this end I've been trying to create a simple system to explore the nuances. I can't seem to get past the 'llmount.sh' test with any degree of success. What I've done: Each system (throwaway PCs with 70Gb HD, 2Gb RAM) is formatted with CentOS 6.2. I then update everything and install the Lustre kernel from downloads.whamcloud.com and add on the various (appropriate) lustre and e2fs RPM files. Systems are rebooted and tested with 'llmount.sh' (and then cleared with 'llmountcleanup.sh'). All is well to this point. First I create an MDS/MDT system via: /usr/sbin/mkfs.lustre --mgs --mdt --fsname=lustre --device-size=200000 --param sys.timeout=20 --mountfsoptions=errors=remount-ro,user_xattr,acl --param lov.stripesize=1048576 --param lov.stripecount=0 --param mdt.identity_upcall=/usr/sbin/l_getidentity --backfstype ldiskfs --reformat /tmp/lustre-mdt1 and then mkdir -p /mnt/mds1 mount -t lustre -o loop,user_xattr,acl /tmp/lustre-mdt1 /mnt/mds1 Next I take 3 systems and create a 2Gb loop mount via: /usr/sbin/mkfs.lustre --ost --fsname=lustre --device-size=200000 --param sys.timeout=20 --mgsnode=lustre_MDS0@tcp --backfstype ldiskfs --reformat /tmp/lustre-ost1 mkdir -p /mnt/ost1 mount -t lustre -o loop /tmp/lustre-ost1 /mnt/ost1 The logs on the MDT box show the OSS boxes connecting up. All appears ok. Last I create a client and attach to the MDT box: mkdir -p /mnt/lustre mount -t lustre -o user_xattr,acl,flock luster_MDS0@tcp:/lustre /mnt/lustre Again, the log on the MDT box shows the client connection. Appears to be successful. Here's where the issues (appear to) start. If I do a 'df -h' on the client it hangs after showing the system drives. If I attempt to create files (via 'dd') on the lustre mount the session hangs and the job can't be killed. Rebooting the client is the only solution. If I do a 'lctl dl' from the client it shows that only 2/3 OST boxes are found and 'UP'. [root@lfsclient0 etc]# lctl dl 0 UP mgc MGC10.127.24.42@tcp 282d249f-fcb2-b90f-8c4e-2f1415485410 5 1 UP lov lustre-clilov-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 4 2 UP lmv lustre-clilmv-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 4 3 UP mdc lustre-MDT0000-mdc-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 5 4 UP osc lustre-OST0000-osc-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 5 5 UP osc lustre-OST0003-osc-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 5 Doing a 'lfs df' from the client shows: [root@lfsclient0 etc]# lfs df UUID 1K-blocks Used Available Use% Mounted on lustre-MDT0000_UUID 149944 16900 123044 12% /mnt/lustre[MDT:0] OST0000 : inactive device OST0001 : Resource temporarily unavailable OST0002 : Resource temporarily unavailable lustre-OST0003_UUID 187464 24764 152636 14% /mnt/lustre[OST:3] filesystem summary: 187464 24764 152636 14% /mnt/lustre Given that each OSS box has a 2Gb (loop) mount I would expect to see this reflected in available size. There are no errors on the MDS/MDT box to indicate that multiple OSS/OST boxes have been lost. EDIT: each system has all other systems defined in /etc/hosts and entries in iptables to provide access. SO: I'm clearly making several mistakes. Any pointers as to where to start correcting them?

  Read the article

• Why don't mails show up in the recipient's mailspool?

  - by Jason

  I have postfix dovecot running with local email system on thunderbird. I have two users on by ubuntu, mailuser 1 and mailuser 2 whom i added to thunderbird. Everything went fine, except the users dont have anything on their inbox on thunderbird and sent mails dont get through. Im using maildir as well. Checking /var/log/mail.log reveals this This what is happining: Restarting postfix and dovecot and then sending mail from one user to another user... I believe this line is the problem May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] Why is it not connecting ? What could be wrong ? /var/log/mail.log May 30 18:30:21 dovecot: imap: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: imap: Server shutting down. in=467 out=475 May 30 18:30:21 dovecot: config: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: log: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: anvil: Warning: Killed with signal 15 (by pid=1 uid=0 code=kill) May 30 18:30:21 dovecot: master: Dovecot v2.2.9 starting up (core dumps disabled) May 30 18:30:54 dovecot: imap-login: Login: user=<mailuser2>, method=PLAIN, rip=::1, lip=::1, mpid=12638, TLS, session=<xUfQkaD66gAAAAAAAAAAAAAAAAAAAAAB> May 30 18:31:04 postfix/master[12245]: terminating on signal 15 May 30 18:31:04 postfix/master[12795]: daemon started -- version 2.11.0, configuration /etc/postfix May 30 18:31:55 postfix/postscreen[12803]: CONNECT from [127.0.0.1]:33668 to [127.0.0.1]:25 May 30 18:31:55 postfix/postscreen[12803]: WHITELISTED [127.0.0.1]:33668 May 30 18:31:55 postfix/smtpd[12804]: connect from localhost[127.0.0.1] May 30 18:31:55 postfix/smtpd[12804]: 1ED7120EB9: client=localhost[127.0.0.1] May 30 18:31:55 postfix/cleanup[12809]: 1ED7120EB9: message-id=<[email protected]> May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: from=<[email protected]>, size=546, nrcpt=1 (queue active) May 30 18:31:55 postfix/local[12810]: 1ED7120EB9: to=<mailuser2@mysitecom>, relay=local, delay=0.03, delays=0.02/0.01/0/0, dsn=2.0.0, status=sent (delivered to maildir) May 30 18:31:55 postfix/qmgr[12799]: 1ED7120EB9: removed May 30 18:31:55 postfix/smtpd[12804]: disconnect from localhost[127.0.0.1] May 30 18:31:55 dovecot: imap-login: Login: user=<mailuser1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=12814, TLS, session=<sD9plaD6PgB/AAAB> This is my postfix main.cf See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = server mydomain = mysite.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = $mydomain mydestination = mysite.com #relayhost = smtp.192.168.10.1.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.10.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir / mailbox_command= All ports are listening tcp 0 0 *:imaps *:* LISTEN tcp 0 0 *:submission *:* LISTEN tcp 0 0 *:imap2 *:* LISTEN tcp 0 0 s148134.s148134.:domain *:* LISTEN tcp 0 0 192.168.56.101:domain *:* LISTEN tcp 0 0 10.0.2.15:domain *:* LISTEN tcp 0 0 localhost:domain *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 localhost:953 *:* LISTEN tcp6 0 0 [::]:imaps [::]:* LISTEN tcp6 0 0 [::]:submission [::]:* LISTEN tcp6 0 0 [::]:imap2 [::]:* LISTEN tcp6 0 0 [::]:domain [::]:* LISTEN tcp6 0 0 [::]:ssh [::]:* LISTEN tcp6 0 0 [::]:smtp [::]:* LISTEN tcp6 0 0 localhost:953 [::]:* LISTEN

  Read the article

• Parallel processing slower than sequential?

  - by zebediah49

  EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

  Read the article

• What's going on with my server? High load, lots of idle CPU time, low disk utilization

  - by Jonathan

  I run a web site and send a legitimate opt-in, daily email newsletter to subscribers. Both the web hosting and email sending are done by the same machine. I have about 100,000 subscribers who have opted in to my daily email newsletter. My PHP script did a pretty good job sending mail to all of them until fairly recently, but as the list has grown I can't keep up. When I run top, I have very high load--usually at least 6 or 7, sometimes as high as 15--even though I only have two CPUs. However, when I run sar, my CPU is idle an average of about 30% of the time. So, it seems I'm not CPU bound. When I run iostat, it seems as though I'm not disk bound because my %util for each device is very low (no more than 5%). Given that I don't seem to be CPU bound or disk bound, why is top reporting such high load? Additionally, since I don't seem to be CPU bound or disk bound, why is my email sending script not able to keep up? Here's what I see when running top: top - 11:33:28 up 74 days, 18:49, 2 users, load average: 7.65, 8.79, 8.28 Tasks: 168 total, 5 running, 162 sleeping, 0 stopped, 1 zombie Cpu(s): 38.9%us, 58.6%sy, 0.8%ni, 0.0%id, 0.7%wa, 0.2%hi, 0.8%si, 0.0%st Mem: 3083012k total, 2144436k used, 938576k free, 281136k buffers Swap: 2048248k total, 39164k used, 2009084k free, 1470412k cached Here's what I see when running iostat -mx: avg-cpu: %user %nice %system %iowait %steal %idle 34.80 1.20 55.24 0.37 0.00 8.38 Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util sda 0.19 71.70 1.59 29.45 0.02 0.07 5.90 0.55 17.82 1.16 3.59 sda1 0.00 0.00 0.00 0.00 0.00 0.00 7.10 0.00 13.80 13.72 0.00 sda2 0.05 50.45 1.13 24.57 0.01 0.29 24.25 0.35 13.43 1.15 2.97 sda3 0.05 10.17 0.20 2.33 0.01 0.05 43.75 0.05 20.96 2.45 0.62 sda4 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 70.50 70.50 0.00 sda5 0.07 0.22 0.03 0.07 0.00 0.00 32.84 0.08 856.19 8.03 0.08 sda6 0.02 5.45 0.03 0.72 0.00 0.02 67.55 0.02 26.72 5.26 0.39 sda7 0.00 1.56 0.00 0.42 0.00 0.01 38.04 0.00 8.88 5.84 0.24 sda8 0.01 3.84 0.20 1.35 0.00 0.02 28.55 0.05 31.90 4.08 0.63 Here's what I see when running sar: 09:40:02 AM CPU %user %nice %system %iowait %steal %idle 09:50:01 AM all 30.59 1.01 49.80 0.23 0.00 18.37 10:00:08 AM all 31.73 0.92 51.66 0.13 0.00 15.55 10:10:06 AM all 30.43 0.99 48.94 0.26 0.00 19.38 10:20:01 AM all 29.58 1.00 47.76 0.25 0.00 21.42 10:30:01 AM all 29.37 1.02 47.30 0.18 0.00 22.13 10:40:06 AM all 32.50 1.01 52.94 0.16 0.00 13.39 10:50:01 AM all 30.49 1.00 49.59 0.15 0.00 18.77 11:00:01 AM all 29.43 0.99 47.71 0.17 0.00 21.71 11:10:07 AM all 30.26 0.93 49.48 0.83 0.00 18.50 11:20:02 AM all 29.83 0.81 48.51 1.32 0.00 19.52 11:30:06 AM all 31.18 0.88 51.33 1.15 0.00 15.47 Average: all 26.21 1.15 42.62 0.48 0.00 29.54 Here are the top handful of processes listed at the particular time I happened to run top -c: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 8180 mysql 16 0 57448 19m 2948 S 26.6 0.7 4702:26 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/bristno.pid --skip-external-locking 26956 brristno 17 0 0 0 0 Z 8.0 0.0 0:00.24 [php] <defunct> 26958 brristno 17 0 94408 43m 37m R 5.0 1.4 0:00.15 /usr/bin/php /home/brristno/public_html/dbv.php 22852 nobody 16 0 9628 2900 1524 S 0.7 0.1 0:00.17 /usr/local/apache/bin/httpd -k start -DSSL 8591 brristno 34 19 96896 13m 6652 S 0.3 0.4 0:29.82 /usr/local/bin/php /home/brristno/bin/mailer.php 1qwqyb6 i0gbor 24469 nobody 16 0 9628 2880 1508 S 0.3 0.1 0:00.08 /usr/local/apache/bin/httpd -k start -DSSL 25495 nobody 15 0 9628 2876 1500 S 0.3 0.1 0:00.06 /usr/local/apache/bin/httpd -k start -DSSL 26149 nobody 15 0 9628 2864 1504 S 0.3 0.1 0:00.04 /usr/local/apache/bin/httpd -k start -DSSL

  Read the article

• File server share access intermittent/slow/machine unstable: win2k8r2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• File server share access intermittent/slow/machine unstable: win2kr2

  - by Jack B.

  I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

  Read the article

• SQL Server Log File Won't Shrink due cause "log are pending replication" on non replicated DB?

  - by user796466

  I have a non Mission Critial DB 9am-5pm SQL Server database that I have set up to do nightly full backups and log backups every 30 minutes during business hours. The database is in full recovery and normally I have no reason to truncate/shrink logs unless I do some heavy maintenance. Log backups manage the size with no issue. However I have not been at this client for several weeks and upon inspection I noticed that the log had grown to about 10 times the size of the .mdf file. I poked around backups had been running and I had not gotten any severity error alerts (SQL mail). I attempted to put DB in simple recovery and shrink the log, this was no good. I precede to try a log backup and I got: The log was not truncated because records at the beginning of the log are pending replication or Change Data Capture. Ensure the Log Reader Agent or capture job is running or use sp_repldone to mark transactions as distributed or captured. Restart SQL Server rinse repeat same thing ... I said ??? Replication is not nor ever has been set up on this DB or database /server ??? So the log backups have not been flushing the .ldf. So I did a couple hours of research and I found: http://www.sqlmonster.com/Uwe/Forum.aspx/sql-server/5445/Log-file-is-not-truncated-inspite-of-regular-log-backup http://www.eggheadcafe.com/software/aspnet/30708322/the-log-was-not-truncated-because-records-at-the-beginning-of-the-log-are-pending-replication.aspx seems to be some kind of poorly documented bug ?? The solution seems to have been to run exec sp_repldone, more precisley EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time= 0, @reset = 1 This procedure can be used in emergency situations to allow truncation of the transaction log when transactions pending replication are present. Using this procedure prevents Microsoft SQL Server 2000 from replicating the database until the database is unpublished and republished. ~ MSDN When I do that I get the following Msg 18757, Level 16, State 1, Procedure sp_repldone, Line 1 Unable to execute procedure. The database is not published. Execute the procedure in a database that is published for replication. Which makes sense Because the DB has never been published for replication. I have several questions: A) First and foremost is, WTF is going on ? What is causeing this, I am interested in knowing the why here ? Is this genuinley a bug or is there some aspect of the backup that is not functioning properly that cause's the DB to mimick a replicated state ? Someone please edify me on this. B) Second ... Do I really have to publish / replicate this DB to exec this SP to fix this ??? Sounds crazy or is there some T-SQL that I can put it in a published state exec the proc and be on my way ... C) Third, if I do indeed have to publish this database to exec the SP to release this unneeded mis replicated/intended log , to get my .ldf file and backup back on track. How do I publish the database without an online host that it is asking for ??? I don't generally do this kind of database administration and need some guidance. Sorry if this is too verbose but just voicing the question helps me clarify it ... Thank you in advance for your help

  Read the article

• How To Start Your Own Professional Blog with WordPress

  - by Matthew Guay

  Would you like to start your own blog or website?  With a free WordPress  account, it’s free and easy to get started creating your own professional quality blog site. This is the first part in a series on how to create your own professional quality blog site. No, we’re not talking about some cheapo looking blog from Blogger or something on Facebook, but creating a quality blog you can be proud of and present to millions of readers online. WordPress is one of the most popular blogging platforms, powering hundreds of high-profile websites and blogs around the world.  It’s both powerful and easy to use, which makes it great whether you’re just starting out or are a blogging pro.  To start out with your blogging project WordPress is completely free, and you can use the online interface or install the WordPress software on your own server and blog from there. Getting Started You can start a blog in just a few minutes.  Head over to WordPress.com and click Sign up now on the right-hand side of the main page. Enter a username and password, check that you agree with the legal terms, select the “Gimme a blog” bullet, and click Next. WordPress may inform you that your username is already taken, simply choose a new one and try again. Next, choose a domain for your blog.  This will be the address for your site, and cannot be changed, so be sure to choose exactly what you want.  If you’d prefer your address to be yourname.com instead of yourname.wordpress.com, you can add your own domain for a fee after your blog is setup…but we’ll cover that later. Once you click signup, you will be sent a confirmation email.  While you wait for the email to arrive you can go ahead and enter in your name and a short bio about yourself. When you receive your confirmation email, click the link.  Congratulations; you now have your own blog! You can view your new blog immediately, though the default theme isn’t very interesting without your content and pictures. Back on the page you opened from the email, click Login to access your blog’s administration page and to start adding stuff to your blog.  You can also access your blog’s admin page anytime by from yourname.wordpress.com/admin, substituting your own blog name for yourname. Enter your username and password, then click Log in to get started. Adding Content to your WordPress.com Blog When you sign in to your WordPress blog, you’ll first see the WordPress Admin page.  Here you can see recent posts and comments, and you can see stats of how many people have visited your site.  You can also access all of your blog tools and settings right from this page. To add a new post to your blog, click the Posts link on the left, then click “Add New” either on the left menu or on the top of the Edit Posts page.  Or, if you want to edit the default first post, hover over it and select Edit. Or click the New Posts button on the top of the page.  This menu bar is always visible whenever you’re logged in, so it’s an easy way to add a post. The editor lets you easily write anything you want in a Microsoft Word-style editor.  You can format your text, add lists, links, quotes, and more.  When you’re ready to share your content with the world, click Publish on the right side. To add pictures or other files, click the picture icon beside “Upload/Insert”.  Your free blog account can store up to 3Gb of pictures and documents which will definitely give you a good start. Click Select Files, and then choose the pictures or documents you want to add to your post. When the pictures have uploaded, you can add a caption and choose how to position the picture.  When you’re finished, select “Insert into Post”.   Or, if you want to add a video, click the video button.  You have to add a paid upgrade to upload videos directly, but you can add YouTube and other online videos for free. Click the “From URL” tab, and then paste the link to the YouTube video and click Insert into post. If you’re a code geek, click the HTML tab in the editor and edit the HTML of your blog post the geeky way. Once you’ve added all your content and edited it the way you want, click the Publish button on the right of the editor.  Or, you can click Preview to make sure it looks right, and then click Publish. Here’s our blog with the new blog post containing a picture and video.  While you’re getting to know you’re way around the controls in WordPress, the Preview feature will be your best friend while you try to organize the content to your liking.   Conclusion It only takes a couple minutes to get started blogging at WordPress.com. Whether you want to write about your daily life, share pictures of your children, or review the latest books and gadgets, WordPress.com is a great place to get started for free.  But we’ve only covered a small portion of the WordPress features…but this should get you started. Check back for more WordPress and blogging coverage coming up soon! Links Signup for a free WordPress.com account Similar Articles Productive Geek Tips Add Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareProtecting Your WordPress Admin Panel From Hackers With .htaccessMake a Backup Copy of your Production Wordpress Blog on UbuntuLinux QuickTip: Downloading and Un-tarring in One Step TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

  Read the article

• C#: System.Collections.Concurrent.ConcurrentQueue vs. Queue

  - by James Michael Hare

  I love new toys, so of course when .NET 4.0 came out I felt like the proverbial kid in the candy store!  Now, some people get all excited about the IDE and it’s new features or about changes to WPF and Silver Light and yes, those are all very fine and grand.  But me, I get all excited about things that tend to affect my life on the backside of development.  That’s why when I heard there were going to be concurrent container implementations in the latest version of .NET I was salivating like Pavlov’s dog at the dinner bell. They seem so simple, really, that one could easily overlook them.  Essentially they are implementations of containers (many that mirror the generic collections, others are new) that have either been optimized with very efficient, limited, or no locking but are still completely thread safe -- and I just had to see what kind of an improvement that would translate into. Since part of my job as a solutions architect here where I work is to help design, develop, and maintain the systems that process tons of requests each second, the thought of extremely efficient thread-safe containers was extremely appealing.  Of course, they also rolled out a whole parallel development framework which I won’t get into in this post but will cover bits and pieces of as time goes by. This time, I was mainly curious as to how well these new concurrent containers would perform compared to areas in our code where we manually synchronize them using lock or some other mechanism.  So I set about to run a processing test with a series of producers and consumers that would be either processing a traditional System.Collections.Generic.Queue or a System.Collection.Concurrent.ConcurrentQueue. Now, I wanted to keep the code as common as possible to make sure that the only variance was the container, so I created a test Producer and a test Consumer.  The test Producer takes an Action<string> delegate which is responsible for taking a string and placing it on whichever queue we’re testing in a thread-safe manner: 1: internal class Producer 2: { 3: public int Iterations { get; set; } 4: public Action<string> ProduceDelegate { get; set; } 5: 6: public void Produce() 7: { 8: for (int i = 0; i < Iterations; i++) 9: { 10: ProduceDelegate(“Hello”); 11: } 12: } 13: } Then likewise, I created a consumer that took a Func<string> that would read from whichever queue we’re testing and return either the string if data exists or null if not.  Then, if the item doesn’t exist, it will do a 10 ms wait before testing again.  Once all the producers are done and join the main thread, a flag will be set in each of the consumers to tell them once the queue is empty they can shut down since no other data is coming: 1: internal class Consumer 2: { 3: public Func<string> ConsumeDelegate { get; set; } 4: public bool HaltWhenEmpty { get; set; } 5: 6: public void Consume() 7: { 8: bool processing = true; 9: 10: while (processing) 11: { 12: string result = ConsumeDelegate(); 13: 14: if(result == null) 15: { 16: if (HaltWhenEmpty) 17: { 18: processing = false; 19: } 20: else 21: { 22: Thread.Sleep(TimeSpan.FromMilliseconds(10)); 23: } 24: } 25: else 26: { 27: DoWork(); // do something non-trivial so consumers lag behind a bit 28: } 29: } 30: } 31: } Okay, now that we’ve done that, we can launch threads of varying numbers using lambdas for each different method of production/consumption.  First let's look at the lambdas for a typical System.Collections.Generics.Queue with locking: 1: // lambda for putting to typical Queue with locking... 2: var productionDelegate = s => 3: { 4: lock (_mutex) 5: { 6: _mutexQueue.Enqueue(s); 7: } 8: }; 9:  10: // and lambda for typical getting from Queue with locking... 11: var consumptionDelegate = () => 12: { 13: lock (_mutex) 14: { 15: if (_mutexQueue.Count > 0) 16: { 17: return _mutexQueue.Dequeue(); 18: } 19: } 20: return null; 21: }; Nothing new or interesting here.  Just typical locks on an internal object instance.  Now let's look at using a ConcurrentQueue from the System.Collections.Concurrent library: 1: // lambda for putting to a ConcurrentQueue, notice it needs no locking! 2: var productionDelegate = s => 3: { 4: _concurrentQueue.Enqueue(s); 5: }; 6:  7: // lambda for getting from a ConcurrentQueue, once again, no locking required. 8: var consumptionDelegate = () => 9: { 10: string s; 11: return _concurrentQueue.TryDequeue(out s) ? s : null; 12: }; So I pass each of these lambdas and the number of producer and consumers threads to launch and take a look at the timing results.  Basically I’m timing from the time all threads start and begin producing/consuming to the time that all threads rejoin.  I won't bore you with the test code, basically it just launches code that creates the producers and consumers and launches them in their own threads, then waits for them all to rejoin.  The following are the timings from the start of all threads to the Join() on all threads completing.  The producers create 10,000,000 items evenly between themselves and then when all producers are done they trigger the consumers to stop once the queue is empty. These are the results in milliseconds from the ordinary Queue with locking: 1: Consumers Producers 1 2 3 Time (ms) 2: ---------- ---------- ------ ------ ------ --------- 3: 1 1 4284 5153 4226 4554.33 4: 10 10 4044 3831 5010 4295.00 5: 100 100 5497 5378 5612 5495.67 6: 1000 1000 24234 25409 27160 25601.00 And the following are the results in milliseconds from the ConcurrentQueue with no locking necessary: 1: Consumers Producers 1 2 3 Time (ms) 2: ---------- ---------- ------ ------ ------ --------- 3: 1 1 3647 3643 3718 3669.33 4: 10 10 2311 2136 2142 2196.33 5: 100 100 2480 2416 2190 2362.00 6: 1000 1000 7289 6897 7061 7082.33 Note that even though obviously 2000 threads is quite extreme, the concurrent queue actually scales really well, whereas the traditional queue with simple locking scales much more poorly. I love the new concurrent collections, they look so much simpler without littering your code with the locking logic, and they perform much better.  All in all, a great new toy to add to your arsenal of multi-threaded processing!

  Read the article

• SharePoint - Summing Calculated Columns By Groups (DVWP)

  - by Mark Rackley

  I had a problem… okay.. okay.. so I have many problems… but let’s focus on one in particular or this blog post would never end… okay? Thank you…. So, I had an electronic timesheet where users entered hours for each day of the week. It also had a “Week Total” column which was a calculated column of the sum. The calculated column looked like this: Pretty easy.. nothing spectacular. So, what’s the problem? WELL……………….. There is a row in the timesheet for each task a person worked on in a given week. So, if you worked on 4 tasks, you would have 4 rows of data, and 4 week totals for that week: This is all fine and dandy, but I want to know what the total was for the entire week. Yes.. I realize the answer is 24 from my example… I mean, I know how to add! I just want SharePoint to display it for me for the executives (we all know, they have math problems).  You may be thinking, hey genius (in a sarcastic tone of course), why don’t you just go to the view and total on the “Week Total” field. What a brilliant idea! Why didn’t I think of that… let’s go to the view and do just that…. Ohhhhhh… you can’t total on a Calculated Column.. it’s not even an option…  Yeah… I had the same moment. So, what do you do? Well… what do you think I did? 1) Googled “SharePoint total calculated column” 2) Said it couldn’t be done 3) Took a nap 4) Asked the question on twitter? The correct answer of course is number 4… followed by number 3… although I may have told my boss number 2 so that I look more brilliant than I am? It’s safe to say I did NOT try to find the solution on my own doing step 1… that would be just WAY to easy… So, anyway, I posted the question on Twitter and it turns out several people had suggestions from using jQuery to using DVWPs. I tend to be a big fan of the DVWP except for the disgusting process of deploying them to another farm.. ugh… just shoot me…. so, that is the solution I went with. Laura Rogers (@WonderLaura) has a super duper easy to follow video on the subject over at EndUserSharePoint.com: SharePoint: Displaying Calculated Column SUMS in a View (Screencast) Laura’s video was very easy to follow and was ALMOST exactly what I needed. She does a great job walking you through every step of summing up a calculated field which was PART of my problem. The other part was my list is grouped by date! So, I wanted to see for a given week, the summed “Week Total” of hours. Laura got me on the right track with her video and I dug a little deeper into the DVWP to accomplish my task. So, here are the steps you follow: 1. Click on the "chevron” (I didn’t know it was actually called that until I heard Laura say it).. I always call it the “little-button-in-the-top-right-corner-with-the-greater-than-sign”.. but “chevron” is much shorter. So, click on the chevron, click on “Sort and Group”. The Add the field you want to group by, in my example it is the “Monday Date” of the timesheet entry. Make sure to check the check boxes for “Show Group Header” AND “Show Group Footer”. Click “OK”. The view now shows the count of each grouped set of data: Interesting, this looks very similar to Laura’s video… right? So, let’s take a look at the code for the Count: Count : <xsl:value-of select="count($nodeset)" /> Wow, also very similar… except in Laura’s video it looks like: Count : <xsl:value-of select="count($Rows)" /> So.. the only difference is that instead of $Rows we have $nodeset. It turns out the $nodeset will go through each Row in the group just like $Rows goes through each row in the entire view. So, using the exact same logic as in Laura’s blog except replacing $Rows with $nodeset we get the functionality of being able to sum up the values for a group. So, I want to replace “Count: #” with the total hours, this is done using the following changes to the above code: Week Total : <xsl:value-of select="sum($nodeset/@Monday)+sum($nodeset/@Tuesday) +sum($nodeset/@Wednesday)+sum($nodeset/@Thursday)+sum($nodeset/@Friday) +sum($nodeset/@Saturday)+sum($nodeset/@Sunday)" /> Our final output has the summed hours for each group! So… long story short… follow Laura’s blog, then group your list, then replace “$Rows” with “$nodeset”. One caveat, this will not work if you group by a person field. For some reason the person field does not go through each row in the group. I haven’t dug into this much yet. Maybe if I find some time… whatever that is… Anyway, Laura did all the work, I just took it one small step forward… as always, feel free to leave any additional insights you may have. We’re all learning here!

  Read the article

• Conversation as User Assistance

  - by ultan o'broin

  Applications User Experience members (Erika Web, Laurie Pattison, and I) attended the User Assistance Europe Conference in Stockholm, Sweden. We were impressed with the thought leadership and practical application of ideas in Anne Gentle's keynote address "Social Web Strategies for Documentation". After the conference, we spoke with Anne to explore the ideas further. Anne Gentle (left) with Applications User Experience Senior Director Laurie Pattison In Anne's book called Conversation and Community: The Social Web for Documentation, she explains how user assistance is undergoing a seismic shift. The direction is away from the old print manuals and online help concept towards a web-based, user community-driven solution using social media tools. User experience professionals now have a vast range of such tools to start and nurture this "conversation": blogs, wikis, forums, social networking sites, microblogging systems, image and video sharing sites, virtual worlds, podcasts, instant messaging, mashups, and so on. That user communities are a rich source of user assistance is not a surprise, but the extent of available assistance is. For example, we know from the Consortium for Service Innovation that there has been an 'explosion' of user-generated content on the web. User-initiated community conversations provide as much as 30 times the number of official help desk solutions for consortium members! The growing reliance on user community solutions is clearly a user experience issue. Anne says that user assistance as conversation "means getting closer to users and helping them perform well. User-centered design has been touted as one of the most important ideas developed in the last 20 years of workplace writing. Now writers can take the idea of user-centered design a step further by starting conversations with users and enabling user assistance in interactions." Some of Anne's favorite examples of this paradigm shift from the world of traditional documentation to community conversation include: Writer Bob Bringhurst's blog about Adobe InDesign and InCopy products and Adobe's community help The Microsoft Development Network Community Center ·The former Sun (now Oracle) OpenDS wiki, NetBeans Ruby and other community approaches to engage diverse audiences using screencasts, wikis, and blogs. Cisco's customer support wiki, EMC's community, as well as Symantec and Intuit's approaches The efforts of Ubuntu, Mozilla, and the FLOSS community generally Adobe Writer Bob Bringhurst's Blog Oracle is not without a user community conversation too. Besides the community discussions and blogs around documentation offerings, we have the My Oracle Support Community forums, Oracle Technology Network (OTN) communities, wiki, blogs, and so on. We have the great work done by our user groups and customer councils. Employees like David Haimes reach out, and enthusiastic non-employee gurus like Chet Justice (OracleNerd), Floyd Teter and Eddie Awad provide great "how-to" information too. But what does this paradigm shift mean for existing technical writers as users turn away from the traditional printable PDF manual deliverables? We asked Anne after the conference. The writer role becomes one of conversation initiator or enabler. The role evolves, along with the process, as the users define their concept of user assistance and terms of engagement with the product instead of having it pre-determined. It is largely a case now of "inventing the job while you're doing it, instead of being hired for it" Anne said. There is less emphasis on formal titles. Anne mentions that her own title "Content Stacker" at OpenStack; others use titles such as "Content Curator" or "Community Lead". However, the role remains one essentially about communications, "but of a new type--interacting with users, moderating, curating content, instead of sitting down to write a manual from start to finish." Clearly then, this role is open to more than professional technical writers. Product managers who write blogs, developers who moderate forums, support professionals who update wikis, rock star programmers with a penchant for YouTube are ideal. Anyone with the product knowledge, empathy for the user, and flair for relationships on the social web can join in. Some even perform these roles already but do not realize it. Anne feels the technical communicator space will move from hiring new community conversation professionals (who are already active in the space through blogging, tweets, wikis, and so on) to retraining some existing writers over time. Our own research reveals that the established proponents of community user assistance even set employee performance objectives for internal content curators about the amount of community content delivered by people outside the organization! To take advantage of the conversations on the web as user assistance, enterprises must first establish where on the spectrum their community lies. "What is the line between community willingness to contribute and the enterprise objectives?" Anne asked. "The relationship with users must be managed and also measured." Anne believes that the process can start with a "just do it" approach. Begin by reaching out to existing user groups, individual bloggers and tweeters, forum posters, early adopter program participants, conference attendees, customer advisory board members, and so on. Use analytical tools to measure the level of conversation about your products and services to show a return on investment (ROI), winning management support. Anne emphasized that success with the community model is dependent on lowering the technical and motivational barriers so that users can readily contribute to the conversation. Simple tools must be provided, and guidelines, if any, must be straightforward but not mandatory. The conversational approach is one where traditional style and branding guides do not necessarily apply. Tools and infrastructure help users to create content easily, to search and find the information online, read it, rate it, translate it, and participate further in the content's evolution. Recognizing contributors by using ratings on forums, giving out Twitter kudos, conference invitations, visits to headquarters, free products, preview releases, and so on, also encourages the adoption of the conversation model. The move to conversation as user assistance is not free, but there is a business ROI. The conversational model means that customer service is enhanced, as user experience moves from a functional to a valued, emotional level. Studies show a positive correlation between loyalty and financial performance (Consortium for Service Innovation, 2010), and as customer experience and loyalty become key differentiators, user experience professionals cannot explore the model's possibilities. The digital universe (measured at 1.2 million petabytes in 2010) is doubling every 12 to 18 months, and 70 percent of that universe consists of user-generated content (IDC, 2010). Conversation as user assistance cannot be ignored but must be embraced. It is a time to manage for abundance, not scarcity. Besides, the conversation approach certainly sounds more interesting, rewarding, and fun than the traditional model! I would like to thank Anne for her time and thoughts, and recommend that all user assistance professionals read her book. You can follow Anne on Twitter at: http://www.twitter.com/annegentle. Oracle's Acrolinx IQ deployment was used to author this article.

  Read the article

• GZip/Deflate Compression in ASP.NET MVC

  - by Rick Strahl

  A long while back I wrote about GZip compression in ASP.NET. In that article I describe two generic helper methods that I've used in all sorts of ASP.NET application from WebForms apps to HttpModules and HttpHandlers that require gzip or deflate compression. The same static methods also work in ASP.NET MVC. Here are the two routines:/// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } /// <summary> /// Sets up the current page or handler to use GZip through a Response.Filter /// IMPORTANT: /// You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() { HttpResponse Response = HttpContext.Current.Response; if (IsGZipSupported()) { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (AcceptEncoding.Contains("gzip")) { Response.Filter = new System.IO.Compression.GZipStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "gzip"); } else { Response.Filter = new System.IO.Compression.DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "deflate"); } } // Allow proxy servers to cache encoded and unencoded versions separately Response.AppendHeader("Vary", "Content-Encoding"); } The first method checks whether the client sending the request includes the accept-encoding for either gzip or deflate, and if if it does it returns true. The second function uses IsGzipSupported() to decide whether it should encode content and uses an Response Filter to do its job. Basically response filters look at the Response output stream as it's written and convert the data flowing through it. Filters are a bit tricky to work with but the two .NET filter streams for GZip and Deflate Compression make this a snap to implement. In my old code and even now in MVC I can always do:public ActionResult List(string keyword=null, int category=0) { WebUtils.GZipEncodePage(); …} to encode my content. And that works just fine. The proper way: Create an ActionFilterAttribute However in MVC this sort of thing is typically better handled by an ActionFilter which can be applied with an attribute. So to be all prim and proper I created an CompressContentAttribute ActionFilter that incorporates those two helper methods and which looks like this:/// <summary> /// Attribute that can be added to controller methods to force content /// to be GZip encoded if the client supports it /// </summary> public class CompressContentAttribute : ActionFilterAttribute { /// <summary> /// Override to compress the content that is generated by /// an action method. /// </summary> /// <param name="filterContext"></param> public override void OnActionExecuting(ActionExecutingContext filterContext) { GZipEncodePage(); } /// <summary> /// Determines if GZip is supported /// </summary> /// <returns></returns> public static bool IsGZipSupported() { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (!string.IsNullOrEmpty(AcceptEncoding) && (AcceptEncoding.Contains("gzip") || AcceptEncoding.Contains("deflate"))) return true; return false; } /// <summary> /// Sets up the current page or handler to use GZip through a Response.Filter /// IMPORTANT: /// You have to call this method before any output is generated! /// </summary> public static void GZipEncodePage() { HttpResponse Response = HttpContext.Current.Response; if (IsGZipSupported()) { string AcceptEncoding = HttpContext.Current.Request.Headers["Accept-Encoding"]; if (AcceptEncoding.Contains("gzip")) { Response.Filter = new System.IO.Compression.GZipStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "gzip"); } else { Response.Filter = new System.IO.Compression.DeflateStream(Response.Filter, System.IO.Compression.CompressionMode.Compress); Response.Headers.Remove("Content-Encoding"); Response.AppendHeader("Content-Encoding", "deflate"); } } // Allow proxy servers to cache encoded and unencoded versions separately Response.AppendHeader("Vary", "Content-Encoding"); } } It's basically the same code wrapped into an ActionFilter attribute, which intercepts requests MVC requests to Controller methods and lets you hook up logic before and after the methods have executed. Here I want to override OnActionExecuting() which fires before the Controller action is fired. With the CompressContentAttribute created, it can now be applied to either the controller as a whole:[CompressContent] public class ClassifiedsController : ClassifiedsBaseController { … } or to one of the Action methods:[CompressContent] public ActionResult List(string keyword=null, int category=0) { … } The former applies compression to every action method, while the latter is selective and only applies it to the individual action method. Is the attribute better than the static utility function? Not really, but it is the standard MVC way to hook up 'filter' content and that's where others are likely to expect to set options like this. In fact,  you have a bit more control with the utility function because you can conditionally apply it in code, but this is actually much less likely in MVC applications than old WebForms apps since controller methods tend to be more focused. Compression Caveats Http compression is very cool and pretty easy to implement in ASP.NET but you have to be careful with it - especially if your content might get transformed or redirected inside of ASP.NET. A good example, is if an error occurs and a compression filter is applied. ASP.NET errors don't clear the filter, but clear the Response headers which results in some nasty garbage because the compressed content now no longer matches the headers. Another issue is Caching, which has to account for all possible ways of compression and non-compression that the content is served. Basically compressed content and caching don't mix well. I wrote about several of these issues in an old blog post and I recommend you take a quick peek before diving into making every bit of output Gzip encoded. None of these are show stoppers, but you have to be aware of the issues. Related Posts GZip Compression with ASP.NET Content ASP.NET GZip Encoding Caveats© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Security Trimmed Cross Site Collection Navigation

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). This article will serve as documentation of a fully functional codeplex project that I just created. This project will give you a WebPart that will give you security trimmed navigation across site collections. The first question is, why create such a project? In every single SharePoint project you will do, one question you will always be faced with is, what should the boundaries of sites be, and what should the boundaries of site collections be? There is no good or bad answer to this, because it really really depends on your needs. There are some factors in play here. Site Collections will allow you to scale, as a Site collection is the smallest entity you can put inside a content database Site collections will allow you to offer different levels of SLAs, because you put a site collection on a separate content database, and put that database on a separate server. Site collections are a security boundary – and they can be moved around at will without affecting other site collections. Site collections are also a branding boundary. They are also a feature deployment boundary, so you can have two site collections on the same web application with completely different nature of services. But site collections break navigation, i.e. a site collection at “/”, and a site collection at “/sites/mySiteCollection”, are completely independent of each other. If you have access to both, the navigation of / won’t show you a link to /sites/mySiteCollection. Some people refer to this as a huge issue in SharePoint. Luckily, some workarounds exist. A long time ago, I had blogged about “Implementing Consistent Navigation across Site Collections”. That approach was a no-code solution, it worked – it gave you a consistent navigation across site collections. But, it didn’t work in a security trimmed fashion! i.e., if I don’t have access to Site Collection ‘X’, it would still show me a link to ‘X’. Well this project gets around that issue. Simply deploy this project, and it’ll give you a WebPart. You can use that WebPart as either a webpart or as a server control dropped via SharePoint designer, and it will give you Security Trimmed Cross Site Collection Navigation. The code has been written for SP2010, but it will work in SP2007 with the help of http://spwcfsupport.codeplex.com . What do I need to do to make it work? I’m glad you asked! Simple! Deploy the .wsp (which you can download here). This will give you a site collection feature called “Winsmarts Cross Site Collection Navigation” as shown below. Go ahead and activate it, and this will give you a WebPart called “Winsmarts Navigation Web Part” as shown below: Just drop this WebPart on your page, and it will show you all site collections that the currently logged in user has access to. Really it’s that easy! This is shown as below - In the above example, I have two site collections that I created at /sites/SiteCollection1 and /sites/SiteCollection2. The navigation shows the titles. You see some extraneous crap as well, you might want to clean that – I’ll talk about that in a minute. What? You’re running into problems? If the problem you’re running into is that you are prompted to login three times, and then it shows a blank webpart that says “Loading your applications ..” and then craps out!, then most probably you’re using a different authentication scheme. Behind the scenes I use a custom WCF service to perform this job. OOTB, I’ve set it to work with NTLM, but if you need to make it work alternate authentications such as forms based auth, or client side certs, you will need to edit the %14%\ISAPI\Winsmarts.CrossSCNav\web.config file, specifically, this section - 1: <bindings> 2: <webHttpBinding> 3: <binding name="customWebHttpBinding"> 4: <security mode="TransportCredentialOnly"> 5: <transport clientCredentialType="Ntlm"/> 6: </security> 7: </binding> 8: </webHttpBinding> 9: </bindings> For Kerberos, change the “clientCredentialType” to “Windows” For Forms auth, remove that transport line For client certs – well that’s a bit more involved, but it’s just web.config changes – hit a good book on WCF or hire me for a billion trillion $. But fair warning, I might be too busy to help immediately. If you’re running into a different problem, please leave a comment below, but the code is pretty rock solid, so .. hmm .. check what you’re doing! BTW, I don’t  make any guarantee/warranty on this – if this code makes you sterile, unpopular, bad hairstyle, anything else, that is your problem! But, there are some known issues - I wrote this as a concept – you can easily extend it to be more flexible. Example, hierarchical nav, or, horizontal nav, jazzy effects with jquery or silverlight– all those are possible very very easily. This webpart is not smart enough to co-exist with another instance of itself on the same page. I can easily extend it to do so, which I will do in my spare(!?) time! Okay good! But that’s not all! As you can see, just dropping the WebPart may show you many extraneous site collections, or maybe you want to restrict which site collections are shown, or exclude a certain site collection to be shown from the navigation. To support that, I created a property on the WebPart called “UrlMatchPattern”, which is a regex expression you specify to trim the results :). So, just edit the WebPart, and specify a string property of “http://sp2010/sites/” as shown below. Note that you can put in whatever regex expression you want! So go crazy, I don’t care! And this gives you a cleaner look.   w00t! Enjoy! Comment on the article ....

  Read the article

• SQL SERVER – Developer Training Resources and Summary Roundup

  - by pinaldave

  It is always pleasure for any author when other renowned authors in the industry write about you. Earlier I wrote a five part blog series on Developer Training and I have received a phenomenal response to the series. I have received plenty of comments, questions and feedback. I thought it would be nice to sum up the whole series as well answer a few of the questions received. Quick Recap Developer Training - Importance and Significance - Part 1 In this part we discussed the importance of training in the real world. The most important and valuable resource any company is its employee. Employees who have been well-trained will be better at their jobs and produce a better product.  An employee who is well trained obviously knows more about their job and all the technical aspects. I have a very high opinion about training employees and it is the most important task. Developer Training – Employee Morals and Ethics – Part 2 In this part we discussed the most crucial components of training. Often employees are expecting the company to pay for their training and the company expresses no interest in training the employee. Quite often training expenses are the real issue for both the employee and employer. There are companies that pay for 100% of the expenses and there are employees who opt for training on their own expense during their personal time. Training is often looked at as vacation by employee and employers and we need to change this mind-set. One of the ways is to report back the learning to your manager and implement newly learned knowledge in day-to-day work. Developer Training – Difficult Questions and Alternative Perspective - Part 3 This part was the most difficult to write as I tried to address a few difficult questions and answers. Training is such a sensitive issue that many developers when not receiving chance for training think about leaving the organization. The manager often feels pressure to accommodate every single employee for training even though his training budget is limited. It is indeed the responsibility of the developer to get maximum advantage from the training. Training immediately helps organizations but stays as a part of an employee’s knowledge forever. Developer Training – Various Options for Developer Training – Part 4 In this part I tried to explore a few methods and options for training. The generic feedback I received on this blog post was short and I should have explored each of the subject of the training in details. I believe there are two big buckets of training 1) Instructor Lead Training and 2) Self Lead Training. The common element between both the methods is “learning material”. Learning material can be of any format – videos, books, paper notes or just a plain black board. Instructor-led training is a very effective mode but not possible every single time. During the course of the developer’s career, one has to learn lots of new technology and it is almost impossible to have a quality trainer available on that subject at that time. Books are most effective and proven methods, however, it always helps if someone explains the concepts of the book with a demonstration. In recent times I have started to believe in online trainings which leads to a hybrid experience. Online trainings take the best part of the books and the best part of the instructor-led training and gives effective training in a matter of hours. Developer Training – A Conclusive Summary- Part 5 In this part, I shared what I was continuously thinking about developer training. There is no better teacher than oneself. There is no better motivation than a personal desire to learn new technology. Honestly there is nothing more personal learning. That “change is the only constant” and “adapt & overcome” are the essential lessons of life. One cannot stop the learning and resist the change. In the IT industry “ego of knowing all” and the “resistance to change” are the most challenging issues. Once someone overcomes them, life is much easier. I believe that proper and appropriate high quality training can help to address the burning issues. Opinion of Friends I invited a few of my friends to express their opinion about developer training and here are their opinions. I am listing them here in the order of the blog post publishing date. Nakul Vachhrajani - Developer Trainings-Importance, Benefits, Tips and follow-up Nakul’s sums of many of the concepts which are complementary to my blog posts. Nakul addresses the burning question of developer training with different angles. I am personally very impressed by his following statement - “Being skilled does not mean having just a stack of certifications, but it also means having an understanding about the internals of the products that you are working on – and using that knowledge to improve the efficiency & productivity at the workplace in turn resulting in better products, better consulting abilities and a happier self.” Nakul also suggests the online training options of Pluralsight. Vinod Kumar - Training–a necessity or bonus Vinod Kumar comes up with excellent follow up on developer training. Vinod is known for his inspirational writing about SQL Server. Vinod starts with a story of a student who is extremely eager to learn the wisdom of life from a monk but the monk does not accept him as a disciple for a long time. The conversation between student and monk is indeed an essence of all learning. We all want to learn quickly and be successful but the most important thing in life is to have the right attitude towards learning and more so towards life. The blog post end with a very important thought about how to avoid the famous excuse – “I don’t have enough time.” Ritesh Shah - Training – useful or useless? Ritesh brings up very important concept related to training. Ritesh in his meticulous style explains why training is an important and lifelong process. Training must not stop at any age but should continue forever. The moment training stops, progress stops along with. Paras Doshi - Professional Development Resource Paras is known for his to–the-point writing, and has summarized the five part series very precisely. He read the five part series and created a digest summary of the blog post. If you are in a rush and have no time to read my five series – I suggest you read his blog post. Training Resources I am often asked what the best resources for learning new technology are. This is the most difficult question EVER. There are plenty of good training resources available. When it is about training our needs are different, our preference of learning is different and we all have an opinion. Additionally, we all are located in different geographic locations worldwide and there is no way one solution will fit all. However, let me list a few of the training resources which I have built so far and you can consume them if you find it relevant to your need. SQL Server Books SQL Server Interview Questions and Answers SQL Wait Stats SQL Programming Joes 2 Pros SQL Server Video Tutorials SQL Server Questions and Answers SQL Server Performance: Indexing Basics SQL Server Performance: Introduction to Query Tuning SQL in Sixty Seconds Series of Sixty Seconds Learning Video on YouTube Trust me worldwide web is very big and there are plenty of high quality learning materials available worldwide – trainer-led as well online. I suggest you explore various options and make the best choice for yourself. Remember, training is your personal journey and it should never stop. Are you ready? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Sending Messages to SignalR Hubs from the Outside

  - by Ricardo Peres

  Introduction You are by now probably familiarized with SignalR, Microsoft’s API for real-time web functionality. This is, in my opinion, one of the greatest products Microsoft has released in recent time. Usually, people login to a site and enter some page which is connected to a SignalR hub. Then they can send and receive messages – not just text messages, mind you – to other users in the same hub. Also, the server can also take the initiative to send messages to all or a specified subset of users on its own, this is known as server push. The normal flow is pretty straightforward, Microsoft has done a great job with the API, it’s clean and quite simple to use. And for the latter – the server taking the initiative – it’s also quite simple, just involves a little more work. The Problem The API for sending messages can be achieved from inside a hub – an instance of the Hub class – which is something that we don’t have if we are the server and we want to send a message to some user or group of users: the Hub instance is only instantiated in response to a client message. The Solution It is possible to acquire a hub’s context from outside of an actual Hub instance, by calling GlobalHost.ConnectionManager.GetHubContext<T>(). This API allows us to: Broadcast messages to all connected clients (possibly excluding some); Send messages to a specific client; Send messages to a group of clients. So, we have groups and clients, each is identified by a string. Client strings are called connection ids and group names are free-form, given by us. The problem with client strings is, we do not know how these map to actual users. One way to achieve this mapping is by overriding the Hub’s OnConnected and OnDisconnected methods and managing the association there. Here’s an example: 1: public class MyHub : Hub 2: { 3: private static readonly IDictionary<String, ISet<String>> users = new ConcurrentDictionary<String, ISet<String>>(); 4:  5: public static IEnumerable<String> GetUserConnections(String username) 6: { 7: ISet<String> connections; 8:  9: users.TryGetValue(username, out connections); 10:  11: return (connections ?? Enumerable.Empty<String>()); 12: } 13:  14: private static void AddUser(String username, String connectionId) 15: { 16: ISet<String> connections; 17:  18: if (users.TryGetValue(username, out connections) == false) 19: { 20: connections = users[username] = new HashSet<String>(); 21: } 22:  23: connections.Add(connectionId); 24: } 25:  26: private static void RemoveUser(String username, String connectionId) 27: { 28: users[username].Remove(connectionId); 29: } 30:  31: public override Task OnConnected() 32: { 33: AddUser(this.Context.Request.User.Identity.Name, this.Context.ConnectionId); 34: return (base.OnConnected()); 35: } 36:  37: public override Task OnDisconnected() 38: { 39: RemoveUser(this.Context.Request.User.Identity.Name, this.Context.ConnectionId); 40: return (base.OnDisconnected()); 41: } 42: } As you can see, I am using a static field to store the mapping between a user and its possibly many connections – for example, multiple open browser tabs or even multiple browsers accessing the same page with the same login credentials. The user identity, as is normal in .NET, is obtained from the IPrincipal which in SignalR hubs case is stored in Context.Request.User. Of course, this property will only have a meaningful value if we enforce authentication. Another way to go is by creating a group for each user that connects: 1: public class MyHub : Hub 2: { 3: public override Task OnConnected() 4: { 5: this.Groups.Add(this.Context.ConnectionId, this.Context.Request.User.Identity.Name); 6: return (base.OnConnected()); 7: } 8:  9: public override Task OnDisconnected() 10: { 11: this.Groups.Remove(this.Context.ConnectionId, this.Context.Request.User.Identity.Name); 12: return (base.OnDisconnected()); 13: } 14: } In this case, we will have a one-to-one equivalence between users and groups. All connections belonging to the same user will fall in the same group. So, if we want to send messages to a user from outside an instance of the Hub class, we can do something like this, for the first option – user mappings stored in a static field: 1: public void SendUserMessage(String username, String message) 2: { 3: var context = GlobalHost.ConnectionManager.GetHubContext<MyHub>(); 4: 5: foreach (String connectionId in HelloHub.GetUserConnections(username)) 6: { 7: context.Clients.Client(connectionId).sendUserMessage(message); 8: } 9: } And for using groups, its even simpler: 1: public void SendUserMessage(String username, String message) 2: { 3: var context = GlobalHost.ConnectionManager.GetHubContext<MyHub>(); 4:  5: context.Clients.Group(username).sendUserMessage(message); 6: } Using groups has the advantage that the IHubContext interface returned from GetHubContext has direct support for groups, no need to send messages to individual connections. Of course, you can wrap both mapping options in a common API, perhaps exposed through IoC. One example of its interface might be: 1: public interface IUserToConnectionMappingService 2: { 3: //associate and dissociate connections to users 4:  5: void AddUserConnection(String username, String connectionId); 6:  7: void RemoveUserConnection(String username, String connectionId); 8: } SignalR has built-in dependency resolution, by means of the static GlobalHost.DependencyResolver property: 1: //for using groups (in the Global class) 2: GlobalHost.DependencyResolver.Register(typeof(IUserToConnectionMappingService), () => new GroupsMappingService()); 3:  4: //for using a static field (in the Global class) 5: GlobalHost.DependencyResolver.Register(typeof(IUserToConnectionMappingService), () => new StaticMappingService()); 6:  7: //retrieving the current service (in the Hub class) 8: var mapping = GlobalHost.DependencyResolver.Resolve<IUserToConnectionMappingService>(); Now all you have to do is implement GroupsMappingService and StaticMappingService with the code I shown here and change SendUserMessage method to rely in the dependency resolver for the actual implementation. Stay tuned for more SignalR posts!

  Read the article

• SQLAuthority News – Pluralsight Course Review – Practices for Software Startups – Part 1 of 2

  - by pinaldave

  This is first part of the two part series of Practices for Software Startup Pluralsight Course. The course is written by Stephen Forte (Blog | Twitter). Stephen Forte is the Chief Strategy Officer of the venture backed company, Telerik, a leading vendor of developer and team productivity tools. Stephen is also a Certified Scrum Master, Certified Scrum Professional, PMP, and also speaks regularly at industry conferences around the world. He has written several books on application and database development.  Stephen is also a board member of the Scrum Alliance. Startups – Everybodies Dream Start-up companies are an important topic right now – everyone wants to start their own business.  It is also important to remember that all companies were a start up at one point – from your corner store to the giants like Microsoft and Apple.  Research proves that not every start-up succeeds, in fact, most will fail before their first year.  There are many reasons for this, and this could be due to the fact that there are many stages to a start-up company, and stumbling at any of these stages can lead to failure.  It is important to understand what makes a start-up company succeed at all its hurdles to become successful.  It is even important to define success.  For most start-ups this would mean becoming their own independently functioning company or to be bought out for a hefty profit by a larger company.  The idea of making a hefty profit by living your dream is extremely important, and you can even think of start-ups as the new craze.  That’s why studying them is so important – they are very popular, but things have changed a lot since their inception. Starting the Startups Beginning a start-up company used to be difficult, but now facilities and information is widely available, and it is much easier.  But that means it is much easier to fail, also.  Previously to start your own company, everything was planned and organized, resources were ensured and backed up before beginning; even the idea of starting your own business was a big thing.  Now anybody can do it, and the steps are simple and outlines everywhere – you can get online software and easily outsource , cloud source, or crowdsource a lot of your material.  But without the type of planning previously required, things can often go badly. New Products – New Ideas – New World There are so many fantastic new products, but they don’t reach success all the time.  I find start-up companies very interesting, and whenever I meet someone who is interested in the subject or already starting their own company, I always ask what they are doing, their plans, goals, market, etc.  I am sorry to say that in most cases, they cannot answer my questions.  It is true that many fantastic ideas fail because of bad decisions.  These bad decisions were not made intentionally, but people were simply unaware of what they should be doing.  This will always lead to failure.  But I am happy to say that all these issues can be gone because Pluralsight is now offering a course all about start-ups by Stephen Forte.  Stephen is a start up leader.  He has successfully started many companies and most are still going strong, or have gone on to even bigger and better things. Beginning Course on Startup I have always thought start-ups are a fascinating subject, and decided to take his course, but it is three hours long.  This would be hard to fit into my busy work day all at once, so I decided to do half of his course before my daughter wakes up, and the other half after she goes to sleep.  The course is divided into six modules, so this would be easy to do.  I began the first chapter early in the morning, at 5 am.  Stephen jumped right into the middle of the subject in the very first module – designing your business plan.  The first question you will have to answer to yourself, to others, and to investors is: What is your product and when will we be able to see it?  So a very important concept is a “minimal viable product.”  This means setting goals for yourself and your product.  We all have large dreams, but your minimal viable product doesn’t have to be your final vision at the very first.  For example: Apple is a giant company, but it is still evolving.  Steve Jobs didn’t envision the iPhone 6 at the very beginning.  He had to start at the first iPhone and do his market research, and the idea evolved into the technology you see now.  So for yourself, you should decide a beginning and stop point.  Do your market research.  Determine who you want to reach, what audience you want for your product.  You can have a great idea that simply will not work in the market, do need, bottlenecks, lack of resources, or competition.  There is a lot of research that needs to be done before you even write a business plan, and Stephen covers it in the very first chapter. The Team – Unique Key to Success After jumping right into the subject in the very first module, I wondered what Stephen could have in store for me for the rest of the course.  Chapter number two is building a team.  Having a team is important regardless of what your startup is.  You can be a true visionary with endless ideas and energy, but one person can still not do everything.  It is important to decide from the very beginning if you will have cofounders, team leaders, and how many employees you’ll need.  Even more important, you’ll need to decide what kind of team you want – what personalities, skills, and type of energy you want each of your employees to bring.  Do you want to have an A+ team with a B- idea, or do you have a B- idea that needs an A+ team to sell it?  Stephen asks all the hard questions!  I was especially impressed by his insight on developing.  You have to decide if you need developers, how many, and what their skills should be. I found this insight extremely useful for everyday usage, not just for start-up companies.  I would apply this kind of information in management at any position.  An amazing team will build an amazing product – and that doesn’t matter if you’re a start-up company or a small team working for a much larger business. Customer Development – The Ultimate Obective Chapter three was about customer development. According to Stephen, there are four different steps to develop a customer base.  The first question to ask yourself is if you are envisioning a large customer base buying a few products each, or a small, dedicated base that buys a lot of your product – quantity vs. Quality.  He also discusses how to earn, retain, and get more customers.  He also says that each customer should be placed in a different role – some will be like investors, who regularly spend with you and invest their money in your business.  It is then your job to take that investment and turn it into a better product in the future.  You need to deal with their money properly – think of it is as theirs as investors, not yours as profit.  At the end of this module I felt that only Stephen could provide this kind of insight, and then he listed all the resources he took his information from.  I have never seen a group of people so passionate about their customers. It was indeed a long day for me. In tomorrow’s part 2 we will discuss rest of the three module and also will see a quick video of the Practices for Software Startup Pluralsight Course. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• I have Oracle SQL Developer Installed, Now What?

  - by thatjeffsmith

  If you’re here because you downloaded a copy of Oracle SQL Developer and now you need help connecting to a database, then you’re in the right place. I’ll show you what you need to get up and going so you can finish your homework, teach yourself Oracle database, or get ready for that job interview. You’ll need about 30 minutes to set everything up…and about 5 years to become proficient with Oracle Oracle Database come with SQL Developer but SQL Developer doesn’t include a database If you install Oracle database, it includes a copy of SQL Developer. If you’re running that copy of SQL Developer, please take a second to upgrade now, as it is WAY out of date. But I’m here to talk to the folks that have downloaded SQL Developer and want to know what to do next. You’ve got it running. You see this ‘Connection’ dialog, and… Where am I connecting to, and who as? You NEED a database Installing SQL Developer does not give you a database. So you’re going to need to install Oracle and create a database, or connect to a database that is already up and running somewhere. Basically you need to know the following: where is this database, what’s it called, and what port is the listener running on? The Default Connection properties in SQL Developer These default settings CAN work, but ONLY if you have installed Oracle Database Express Edition (XE). Localhost is a network alias for 127.0.0.1 which is an IP address that maps to the ‘local’ machine, or the machine you are reading this blog post on. The listener is a service that runs on the server and handles connections for the databases on that machine. You can run a database without a listener and you can run a listener without a database, but you can’t connect to a database on a different server unless both that database and listener are up and running. Each listener ‘listens’ on one or more ports, you need to know the port number for each connection. The default port is 1521, but 1522 is often pretty common. I know all of this sounds very complicated Oracle is a very sophisticated piece of software. It’s not analogous to downloading a mobile phone app and and using it 10 seconds later. It’s not like installing Office/Access either – it requires services, environment setup, kernel tweaks, etc. However. Normally an administrator will setup and install Oracle, create the database, and configure the listener for everyone else to use. They’ll often also setup the connection details for everyone via a ‘TNSNAMES.ORA’ file. This file contains a list of database connection details for folks to browse – kind of like an Oracle database phoneboook. If someone has given you a TNSNAMES.ORA file, or setup your machine to have access to a TNSNAMES file, then you can just switch to the ‘TNS’ connection type, and use the dropdown to select the database you want to connect to. Then you don’t have to worry about the server names, database names, and the port numbers. ORCL – that sounds promising! ORCL is the default SID when creating a new database with the Database Creation Assistant (DBCA). It’s just me, and I need help! No administrator, no database, no nothing. What do you do? You have a few options: Buy a copy of Oracle and download, install, and create a database Download and install XE (FREE!) Download, import, and run our Developer Days Hands-on-Lab (FREE!) If you’re a student (or anyone else) with little to no experience with Oracle, then I recommend the third option. Oracle Technology Network Developer Day: Hands-on Database Application Development Lab The OTN lab runs on a A Virtual Box image which contains: 11gR2 Enterprise Edition copy of Oracle a database and listener running for you to connect to lots of demo data for you to play with SQL Developer installed and ready to connect Some browser based labs you can step through to learn Oracle You download the image, you download and install Virtual Box (also FREE!), then you IMPORT the image you previously downloaded. You then ‘Start’ the image. It will boot a copy of Oracle Enterprise Linux (OEL), start your database, and all that jazz. You can then start up and run SQL Developer inside the image OR you can connect to the database running on the image using the copy of SQL Developer you installed on your host machine. Setup Port Forwarding to Make It Easy to Connect From Your Host When you start the image, it will be assigned an IP address. Depending on what network adapter you select in the image preferences, you may get something that can get out to the internet from your image, something your host machine can see and connect to, or something that kind of just lives out there in a vacuum. You want to avoid the ‘vacuum’ option – unless you’re OK with running SQL Developer inside the Linux image. Open the Virtual Box image properties and go to the Networking options. We’re going to setup port forwarding. This will tell your machine that anything that happens on port 1521 (the default Oracle Listener port), should just go to the image’s port 1521. So I can connect to ‘localhost’ and it will magically get transferred to the image that is running. Oracle Virtual Box Port Forwarding 1521 listener database Now You Just Need a Username and Password The default passwords on this image are all ‘oracle’ – so you can connect as SYS, HR, or whatever – just use ‘oracle’ as the password. The Linux passowrds are all ‘oracle’ too, so you can login as ‘root’ or as ‘oracle’ in the Linux desktop. Connect! Connect as HR to your Oracle database running on the OTN Developer Days Virtual Box image If you’re connecting to someone else’s database, you need to ask the person that manages that environment to create for you an account. Don’t try to ‘guess’ or ‘figure out’ what the username and password is. Introduce yourself, explain your situation, and ask kindly for access. This is your first test – can you connect? I know it’s hard to get started with Oracle. There are however many things we offer to make this easier. You’ll need to do a bit of RTM first though. Once you know what’s required, you will be much more likely to succeed. Of course, if you need help, you know where to find me

  Read the article

• ODI 12c - Parallel Table Load

  - by David Allan

  In this post we will look at the ODI 12c capability of parallel table load from the aspect of the mapping developer and the knowledge module developer - two quite different viewpoints. This is about parallel table loading which isn't to be confused with loading multiple targets per se. It supports the ability for ODI mappings to be executed concurrently especially if there is an overlap of the datastores that they access, so any temporary resources created may be uniquely constructed by ODI. Temporary objects can be anything basically - common examples are staging tables, indexes, views, directories - anything in the ETL to help the data integration flow do its job. In ODI 11g users found a few workarounds (such as changing the technology prefixes - see here) to build unique temporary names but it was more of a challenge in error cases. ODI 12c mappings by default operate exactly as they did in ODI 11g with respect to these temporary names (this is also true for upgraded interfaces and scenarios) but can be configured to support the uniqueness capabilities. We will look at this feature from two aspects; that of a mapping developer and that of a developer (of procedures or KMs). 1. Firstly as a Mapping Developer..... 1.1 Control when uniqueness is enabled A new property is available to set unique name generation on/off. When unique names have been enabled for a mapping, all temporary names used by the collection and integration objects will be generated using unique names. This property is presented as a check-box in the Property Inspector for a deployment specification. 1.2 Handle cleanup after successful execution Provided that all temporary objects that are created have a corresponding drop statement then all of the temporary objects should be removed during a successful execution. This should be the case with the KMs developed by Oracle. 1.3 Handle cleanup after unsuccessful execution If an execution failed in ODI 11g then temporary tables would have been left around and cleaned up in the subsequent run. In ODI 12c, KM tasks can now have a cleanup-type task which is executed even after a failure in the main tasks. These cleanup tasks will be executed even on failure if the property 'Remove Temporary Objects on Error' is set. If the agent was to crash and not be able to execute this task, then there is an ODI tool (OdiRemoveTemporaryObjects here) you can invoke to cleanup the tables - it supports date ranges and the like. That's all there is to it from the aspect of the mapping developer it's much, much simpler and straightforward. You can now execute the same mapping concurrently or execute many mappings using the same resource concurrently without worrying about conflict.  2. Secondly as a Procedure or KM Developer..... In the ODI Operator the executed code shows the actual name that is generated - you can also see the runtime code prior to execution (introduced in 11.1.1.7), for example below in the code type I selected 'Pre-executed Code' this lets you see the code about to be processed and you can also see the executed code (which is the default view). References to the collection (C$) and integration (I$) names will be automatically made unique by using the odiRef APIs - these objects will have unique names whenever concurrency has been enabled for a particular mapping deployment specification. It's also possible to use name uniqueness functions in procedures and your own KMs. 2.1 New uniqueness tags  You can also make your own temporary objects have unique names by explicitly including either %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG in the name passed to calls to the odiRef APIs. Such names would always include the unique tag regardless of the concurrency setting. To illustrate, let's look at the getObjectName() method. At <% expansion time, this API will append %UNIQUE_STEP_TAG to the object name for collection and integration tables. The name parameter passed to this API may contain  %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG. This API always generates to the <? version of getObjectName() At execution time this API will replace the unique tag macros with a string that is unique to the current execution scope. The returned name will conform to the name-length restriction for the target technology, and its pattern for the unique tag. Any necessary truncation will be performed against the initial name for the object and any other fixed text that may have been specified. Examples are:- <?=odiRef.getObjectName("L", "%COL_PRFEMP%UNIQUE_STEP_TAG", "D")?> SCOTT.C$_EABH7QI1BR1EQI3M76PG9SIMBQQ <?=odiRef.getObjectName("L", "EMP%UNIQUE_STEP_TAG_AE", "D")?> SCOTT.EMPAO96Q2JEKO0FTHQP77TMSAIOSR_ Methods which have this kind of support include getFrom, getTableName, getTable, getObjectShortName and getTemporaryIndex. There are APIs for retrieving this tag info also, the getInfo API has been extended with the following properties (the UNIQUE* properties can also be used in ODI procedures); UNIQUE_STEP_TAG - Returns the unique value for the current step scope, e.g. 5rvmd8hOIy7OU2o1FhsF61 Note that this will be a different value for each loop-iteration when the step is in a loop. UNIQUE_SESSION_TAG - Returns the unique value for the current session scope, e.g. 6N38vXLrgjwUwT5MseHHY9 IS_CONCURRENT - Returns info about the current mapping, will return 0 or 1 (only in % phase) GUID_SRC_SET - Returns the UUID for the current source set/execution unit (only in % phase) The getPop API has been extended with the IS_CONCURRENT property which returns info about an mapping, will return 0 or 1.  2.2 Additional APIs Some new APIs are provided including getFormattedName which will allow KM developers to construct a name from fixed-text or ODI symbols that can be optionally truncate to a max length and use a specific encoding for the unique tag. It has syntax getFormattedName(String pName[, String pTechnologyCode]) This API is available at both the % and the ? phase.  The format string can contain the ODI prefixes that are available for getObjectName(), e.g. %INT_PRF, %COL_PRF, %ERR_PRF, %IDX_PRF alongwith %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG. The latter tags will be expanded into a unique string according to the specified technology. Calls to this API within the same execution context are guaranteed to return the same unique name provided that the same parameters are passed to the call. e.g. <%=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG_AE", "ORACLE")%> <?=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG_AE", "ORACLE")?> C$_MY_TAB7wDiBe80vBog1auacS1xB_AE <?=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG.log", "FILE")?> C2_MY_TAB7wDiBe80vBog1auacS1xB.log 2.3 Name length generation  As part of name generation, the length of the generated name will be compared with the maximum length for the target technology and truncation may need to be applied. When a unique tag is included in the generated string it is important that uniqueness is not compromised by truncation of the unique tag. When a unique tag is NOT part of the generated name, the name will be truncated by removing characters from the end - this is the existing 11g algorithm. When a unique tag is included, the algorithm will first truncate the <postfix> and if necessary  the <prefix>. It is recommended that users will ensure there is sufficient uniqueness in the <prefix> section to ensure uniqueness of the final resultant name. SUMMARY To summarize, ODI 12c make it much simpler to utilize mappings in concurrent cases and provides APIs for helping developing any procedures or custom knowledge modules in such a way they can be used in highly concurrent, parallel scenarios. 

  Read the article

• [GEEK SCHOOL] Network Security 4: Windows Firewall: Your System’s Best Defense

  - by Ciprian Rusen

  If you have your computer connected to a network, or directly to your Internet connection, then having a firewall is an absolute necessity. In this lesson we will discuss the Windows Firewall – one of the best security features available in Windows! The Windows Firewall made its debut in Windows XP. Prior to that, Windows system needed to rely on third-party solutions or dedicated hardware to protect them from network-based attacks. Over the years, Microsoft has done a great job with it and it is one of the best firewalls you will ever find for Windows operating systems. Seriously, it is so good that some commercial vendors have decided to piggyback on it! Let’s talk about what you will learn in this lesson. First, you will learn about what the Windows Firewall is, what it does, and how it works. Afterward, you will start to get your hands dirty and edit the list of apps, programs, and features that are allowed to communicate through the Windows Firewall depending on the type of network you are connected to. Moving on from there, you will learn how to add new apps or programs to the list of allowed items and how to remove the apps and programs that you want to block. Last but not least, you will learn how to enable or disable the Windows Firewall, for only one type of networks or for all network connections. By the end of this lesson, you should know enough about the Windows Firewall to use and manage it effectively. What is the Windows Firewall? Windows Firewall is an important security application that’s built into Windows. One of its roles is to block unauthorized access to your computer. The second role is to permit authorized data communications to and from your computer. Windows Firewall does these things with the help of rules and exceptions that are applied both to inbound and outbound traffic. They are applied depending on the type of network you are connected to and the location you have set for it in Windows, when connecting to the network. Based on your choice, the Windows Firewall automatically adjusts the rules and exceptions applied to that network. This makes the Windows Firewall a product that’s silent and easy to use. It bothers you only when it doesn’t have any rules and exceptions for what you are trying to do or what the programs running on your computer are trying to do. If you need a refresher on the concept of network locations, we recommend you to read our How-To Geek School class on Windows Networking. Another benefit of the Windows Firewall is that it is so tightly and nicely integrated into Windows and all its networking features, that some commercial vendors decided to piggyback onto it and use it in their security products. For example, products from companies like Trend Micro or F-Secure no longer provide their proprietary firewall modules but use the Windows Firewall instead. Except for a few wording differences, the Windows Firewall works the same in Windows 7 and Windows 8.x. The only notable difference is that in Windows 8.x you will see the word “app” being used instead of “program”. Where to Find the Windows Firewall By default, the Windows Firewall is turned on and you don’t need to do anything special in order for it work. You will see it displaying some prompts once in a while but they show up so rarely that you might forget that is even working. If you want to access it and configure the way it works, go to the Control Panel, then go to “System and Security” and select “Windows Firewall”. Now you will see the Windows Firewall window where you can get a quick glimpse on whether it is turned on and the type of network you are connected to: private networks or public network. For the network type that you are connected to, you will see additional information like: The state of the Windows Firewall How the Windows Firewall deals with incoming connections The active network When the Windows Firewall will notify you You can easily expand the other section and view the default settings that apply when connecting to networks of that type. If you have installed a third-party security application that also includes a firewall module, chances are that the Windows Firewall has been disabled, in order to avoid performance issues and conflicts between the two security products. If that is the case for your computer or device, you won’t be able to view any information in the Windows Firewall window and you won’t be able to configure the way it works. Instead, you will see a warning that says: “These settings are being managed by vendor application – Application Name”. In the screenshot below you can see an example of how this looks. How to Allow Desktop Applications Through the Windows Firewall Windows Firewall has a very comprehensive set of rules and most Windows programs that you install add their own exceptions to the Windows Firewall so that they receive network and Internet access. This means that you will see prompts from the Windows Firewall on occasion, generally when you install programs that do not add their own exceptions to the Windows Firewall’s list. In a Windows Firewall prompt, you are asked to select the network locations to which you allow access for that program: private networks or public networks. By default, Windows Firewall selects the checkbox that’s appropriate for the network you are currently using. You can decide to allow access for both types of network locations or just to one of them. To apply your setting press “Allow access”. If you want to block network access for that program, press “Cancel” and the program will be set as blocked for both network locations. At this step you should note that only administrators can set exceptions in the Windows Firewall. If you are using a standard account without administrator permissions, the programs that do not comply with the Windows Firewall rules and exceptions are automatically blocked, without any prompts being shown. You should note that in Windows 8.x you will never see any Windows Firewall prompts related to apps from the Windows Store. They are automatically given access to the network and the Internet based on the assumption that you are aware of the permissions they require based on the information displayed by the Windows Store. Windows Firewall rules and exceptions are automatically created for each app that you install from the Windows Store. However, you can easily block access to the network and the Internet for any app, using the instructions in the next section. How to Customize the Rules for Allowed Apps Windows Firewall allows any user with an administrator account to change the list of rules and exceptions applied for apps and desktop programs. In order to do this, first start the Windows Firewall. On the column on the left, click or tap “Allow an app or feature through Windows Firewall” (in Windows 8.x) or “Allow a program or feature through Windows Firewall” (in Windows 7). Now you see the list of apps and programs that are allowed to communicate through the Windows Firewall. At this point, the list is grayed out and you can only view which apps, features, and programs have rules that are enabled in the Windows Firewall.

  Read the article

• South Florida Code Camp 2010 &ndash; VI &ndash; 2010-02-27

  - by Dave Noderer

  Catching up after our sixth code camp here in the Ft Lauderdale, FL area. Website at: http://www.fladotnet.com/codecamp. For the 5th time, DeVry University hosted the event which makes everything else really easy! Statistics from 2010 South Florida Code Camp: 848 registered (we use Microsoft Group Events) ~ 600 attended (516 took name badges) 64 speakers (including speaker idol) 72 sessions 12 parallel tracks Food 400 waters 600 sodas 900 cups of coffee (it was cold!) 200 pounds of ice 200 pizza's 10 large salad trays 900 mouse pads Photos on facebook Dave Noderer: http://www.facebook.com/home.php#!/album.php?aid=190812&id=693530361 Joe Healy: http://www.facebook.com/devfish?ref=mf#!/album.php?aid=202787&id=720054950 Will Strohl:http://www.facebook.com/home.php#!/album.php?aid=2045553&id=1046966128&ref=mf Veronica Gonzalez: http://www.facebook.com/home.php#!/album.php?aid=150954&id=672439484 Florida Speaker Idol One of the sessions at code camp was the South Florida Regional speaker idol competition. After user group level competitions there are five competitors. I acted as MC and score keeper while Ed Hill, Bob O’Connell, John Dunagan and Shervin Shakibi were judges. This statewide competition is being run by Roy Lawsen in Lakeland and the winner, Jeff Truman from Naples will move on to the state finals to be held at the Orlando Code Camp on 3/27/2010: http://www.orlandocodecamp.com/. Each speaker has 10 minutes. The participants were: Alex Koval Jeff Truman Jared Nielsen Chris Catto Venkat Narayanasamy They all did a great job and I’m working with each to make sure they don’t stop there and start speaking at meetings. Thanks to everyone involved! Volunteers As always events like this don’t happen without a lot of help! The key people were: Ed Hill, Bob O’Connell – DeVry For the months leading up to the event, Ed collects all of the swag, books, etc and stores them. He holds meeting with various DeVry departments to coordinate the day, he works with the students in the days  before code camp to stuff bags, print signs, arrange tables and visit BJ’s for our supplies (I go and pay but have a small car!). And of course the day of the event he is there at 5:30 am!! We took two SUV’s to BJ’s, i was really worried that the 36 cases of water were going to break his rear axle! He also helps with the students and works very hard before and after the event. Rainer Haberman – Speakers and Volunteer of the Year Rainer has helped over the past couple of years but this time he took full control of arranging the tracks. I did some preliminary work solicitation speakers but he took over all communications after that. We have tried various organizations around speakers, chair per track, central team but having someone paying attention to the details is definitely the way to go! This was the first year I did not have to jump in at the last minute and re-arrange everything. There were lots of kudo’s from the speakers too saying they felt it was more organized than they have experienced in the past from any code camp. Thanks Rainer! Ray Alamonte – Book Swap We saw the idea of a book swap from the Alabama Code Camp and thought we would give it a try. Ray jumped in and took control. The idea was to get people to bring their old technical books to swap or for others to buy. You got a ticket for each book you brought that you could then turn in to buy another book. If you did not have a ticket you could buy a book for $1. Net proceeds were $153 which I rounded up and donated to the Red Cross. There is plenty going on in Haiti and Chile! I don’t think we really got a count of how many books came in. I many cases the books barely hit the table before being picked up again. At the end we were left with a dozen books which we donated to the DeVry library. A great success we will definitely do again! Jace Weiss / Ratchelen Hut – Coffee and Snacks Wow, this was an eye opener. In past years a few of us would struggle to give some attention to coffee, snacks, etc. But it was always tenuous and always ended up running out of coffee. In the past we have tried buying Dunkin Donuts coffee, renting urns, borrowing urns, etc. This year I actually purchased 2 – 100 cup Westbend commercial brewers plus a couple of small urns (30 and 60 cup we used for decaf). We got them both started early (although i forgot to push the on button on one!) and primed it with 10 boxes of Joe from Dunkin. then Jace and Rachelen took over.. once a batch was brewed they would refill the boxes, keep the area clean and at one point were filling cups. We never ran out of coffee and served a few hundred more than last  year. We did look but next year I’ll get a large insulated (like gatorade) dispensing container. It all went very smoothly and having help focused on that one area was a big win. Thanks Jace and Rachelen! Ken & Shirley Golding / Roberta Barbosa – Registration Ken & Shirley showed up and took over registration. This year we printed small name tags for everyone registered which was great because it is much easier to remember someone’s name when they are labeled! In any case it went the smoothest it has ever gone. All three were actively pulling people through the registration, answering questions, directing them to bags and information very quickly. I did not see that there was too big a line at any time. Thanks!! Scott Katarincic / Vishal Shukla – Website For the 3rd?? year in a row, Scott was in charge of the website starting in August or September when I start on code camp. He handles all the requests, makes changes to the site and admin. I think two years ago he wrote all the backend administration and tunes it and the website a bit but things are pretty stable. The only thing I do is put up the sponsors. It is a big pressure off of me!! Thanks Scott! Vishal jumped into the web end this year and created a new Silverlight agenda page to replace the old ajax page. We will continue to enhance this but it is definitely a good step forward! Thanks! Alex Funkhouser – T-shirts/Mouse pads/tables/sponsors Alex helps in many areas. He helps me bring in sponsors and handles all the logistics for t-shirts, sponsor tables and this year the mouse pads. He is also a key person to help promote the event as well not to mention the after after party which I did not attend and don’t want to know much about! Students There were a number of student volunteers but don’t have all of their names. But thanks to them, they stuffed bags, patrolled pizza and helped with moving things around. Sponsors We had a bunch of great sponsors which allowed us to feed people and give a way a lot of great swag. Our major sponsors of DeVry, Microsoft (both DPE and UGSS), Infragistics, Telerik, SQL Share (End to End, SQL Saturdays), and Interclick are very much appreciated. The other sponsors Applied Innovations (also supply code camp hosting), Ultimate Software (a great local SW company), Linxter (reliable cloud messaging we are lucky to have here!), Mediascend (a media startup), SoftwareFX (another local SW company we are happy to have back participating in CC), CozyRoc (if you do SSIS, check them out), Arrow Design (local DNN and Silverlight experts),Boxes and Arrows (a local SW consulting company) and Robert Half. One thing we did this year besides a t-shirt was a mouse pad. I like it because it will be around for a long time on many desks. After much investigation and years of using mouse pad’s I’ve determined that the 1/8” fabric top is the best and that is what we got!   So now I get a break for a few months before starting again!

  Read the article

• CodePlex Daily Summary for Monday, March 22, 2010

  CodePlex Daily Summary for Monday, March 22, 2010New Projects[Tool] Vczh Non-public DLL Classes Caller: Generate C# code for you to call non-public classes in DLLs very easily.Artefact Animator: Artefact Animator provides an easy to use framework for procedural time-based animations in Silverlight and WPF.cacheroo: Cacheroo is a social networking community that will make it easier for people who love geocaching to get connected.Data Processing Toolkit: An utility app to collected data from different sources (i.e. bugzilla bug reports) in a structured way. We are currently setting up the site. Mo...eXternal SQL Bridge (PHP): The eXternal SQL Bridge (XSB) allows you to bridge two websites together in a secure manner through pre-shared keys. XSB is resilient against repla...'G' - Language to Define Gestures for Touch Based Applications: A cross plat form multi-touch application framework with a language to define gestures. The application is build on Silverlight 4.0 and the languag...IIS Network Diagnostic Tools: Web implementation of "looking glass" like services (ping, traceroute) as HTTP modules for Internet Information Services.Interop Router: This project establishes a communication framework and job dispatcher for a mixed operating system cluster environment.L2 Commander: L2Commander makes it easier for both new and old l2j users to manage your server.You no longer have to waste time on finding the files you need and...MediaHelper: A utility to help clean up empty/unwanted files and folders in your filesystem.mhinze: matt hinze stuffOneMan: Focus on Silverlight and WCF technology.Rss Photo Frame Android Widget: RSS Photo Frame Android Widget permits showing pictures from any RSS feed on your Android device's desktopSingle Web Session: Web Tool Kits Current project provide developer with different tools that help to enhance web site performance, security, and other common functio...Work Item Visualization: Use DGML to visualize and analyze your TFS Work Items. Included is the ability to perform basic risk/impact analysis. It helps answer the question,...New Releases[Tool] Vczh Non-public DLL Classes Caller: Wrapper Coder (beta): Click "<Click Me To Open Assembly File>", WrapperCoder will load the assembly and referenced assembly. Check the non-public classes that you want...APS - Automatic Print Screen: APS 1.0: APS automatizes the tasks of paste the image in Paint and save it after print screen or alt+print screen. Choose directory, name and file extension...BTP Tools: e-Sword generator build 20100321: 1. Modify the indent after subtitle. 2. Add 2 spaces after subtitle.Combres - WebForm & MVC Client-side Resource Combine Library: Combres 2.0: Changes since last version (1.2) Support ignore Combres pipeline in debug mode - see issue #6088 Debug mode generates comment helping identify in...Desafio Office 2010 Brasil: DesafioOutlook: Controlando um robo com o Outlook 2010dylan.NET: dylan.NET v. 9.4: Adding Platform Invocation Services Support, full Managed Pointer Support, Charset,Dllimport,Callconv setting for P/Invoke, MarshalAs for parametersFamily Tree Analyzer: Version 1.3.2.0: Version 1.3.2.0 Add open folder button to IGI Search Form Fixes to Fact Location processing - IGIName renamed to RegionID Fix if Region ID not fou...Fasterflect - A Fast and Simple Reflection API: Fasterflect 2.0: We are pleased to release version 2.0 of Fasterflect, which contains a lot of additions and improvements from the previous version. Please refer t...IIS Network Diagnostic Tools: 1.0: Initial public release.Informant: Informant (Desktop) v0.1: This release allows users to send sms messages to 1-Many Groups or 1-Many contacts. It is a very basic release of the application. No styling has b...InfoService: InfoService v1.5 - MPE1 Package: InfoService Release v1.5.0.65 Please read Plugin installation for installation instructions.InfoService: InfoService v1.5 - RAR Package: InfoService Release v1.5.0.65 Please read Plugin installation for installation instructions.L2 Commander: Source Code Link: Where to find our source.ModularCMS: ModularCMS 1.2: Minor bug fixes.NMTools: NMTools-v40b0-20100321-0: The most noticeable aspect of this release is that NMTools is now an independent project. It will no longer tied to OpenSLIM. Nevertheless, OpenSLI...SharePoint LogViewer: SharePoint LogViewer 1.5.3: Log loading performance enhanced. Search text box now has auto complete feature.Single Web Session: Single Web Session: !Single Web Session! <httpModules> <add name="SingleSession" type="SingleWebSession.Model.WebSessionModule, SingleWebSession"/> </httpModules>Sprite Sheet Packer: 2.1 Release: Made a few crucial fixes from 2.0: - Fixed error with paths having spaces. - Fixed error with UI not unlocking. - Fixed NullReferenceException on ...uManage - AD Self-Service Portal: uManage v1.1 (.NET 4.0 RC): Updated Releasev1.1 Adds the primary ability to setup and configure the application through a setup wizard. The setup wizard will continue to evol...VCC: Latest build, v2.1.30321.0: Automatic drop of latest buildVS ChessMania: VS ChessMania V2 March Beta: Second Beta Release with move correction and making application more safe for user. New features will be added soon.WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.9.00: Whats New Added New Toolbar Plugin (By Kent Safransk) 'MediaEmbed' to Include Embed Media from Youtube, Vimeo, etc. Media Embed Plugin Added New ...WeatherBar: WeatherBar 1.0 [No Installation]: Extract the ZIP archive and run WeatherBar.exe. Current release contains some bugs that will be fixed in the next version. Check the Issue Tracker...Work Item Visualization: Release 1.0: This is the initial release of the Work Item Visualization tool. There are no known issues when it comes to the visualization aspects of the tool b...WPF Application Framework (WAF): WPF Application Framework (WAF) 1.0.0.10: Version: 1.0.0.10 (Milestone 10): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requi...WPF AutoComplete TextBox Control: Version 1.2: What's Newadds AutoAppend feature adds a new provider: UrlHistoryDataProvider sample application is updated to reflect the new things Bug Fixe...ZoomBarPlus: V2 (Beta): - Fixed bug: if the active window changed while you were in the middle of a single tap delay, long tap delay, or swipe-repeat, it would continue re...Most Popular ProjectsMetaSharpSavvy DateTimeRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)Most Active ProjectsLINQ to TwitterRawrOData SDK for PHPjQuery Library for SharePoint Web ServicesDirectQPHPExcelFarseer Physics Enginepatterns & practices – Enterprise LibraryBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• ParallelWork: Feature rich multithreaded fluent task execution library for WPF

  - by oazabir

  ParallelWork is an open source free helper class that lets you run multiple work in parallel threads, get success, failure and progress update on the WPF UI thread, wait for work to complete, abort all work (in case of shutdown), queue work to run after certain time, chain parallel work one after another. It’s more convenient than using .NET’s BackgroundWorker because you don’t have to declare one component per work, nor do you need to declare event handlers to receive notification and carry additional data through private variables. You can safely pass objects produced from different thread to the success callback. Moreover, you can wait for work to complete before you do certain operation and you can abort all parallel work while they are in-flight. If you are building highly responsive WPF UI where you have to carry out multiple job in parallel yet want full control over those parallel jobs completion and cancellation, then the ParallelWork library is the right solution for you. I am using the ParallelWork library in my PlantUmlEditor project, which is a free open source UML editor built on WPF. You can see some realistic use of the ParallelWork library there. Moreover, the test project comes with 400 lines of Behavior Driven Development flavored tests, that confirms it really does what it says it does. The source code of the library is part of the “Utilities” project in PlantUmlEditor source code hosted at Google Code. The library comes in two flavors, one is the ParallelWork static class, which has a collection of static methods that you can call. Another is the Start class, which is a fluent wrapper over the ParallelWork class to make it more readable and aesthetically pleasing code. ParallelWork allows you to start work immediately on separate thread or you can queue a work to start after some duration. You can start an immediate work in a new thread using the following methods: void StartNow(Action doWork, Action onComplete) void StartNow(Action doWork, Action onComplete, Action<Exception> failed) For example, ParallelWork.StartNow(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }, () => { workEndedAt = DateTime.Now; }); Or you can use the fluent way Start.Work: Start.Work(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }) .OnComplete(() => { workCompletedAt = DateTime.Now; }) .Run(); Besides simple execution of work on a parallel thread, you can have the parallel thread produce some object and then pass it to the success callback by using these overloads: void StartNow<T>(Func<T> doWork, Action<T> onComplete) void StartNow<T>(Func<T> doWork, Action<T> onComplete, Action<Exception> fail) For example, ParallelWork.StartNow<Dictionary<string, string>>( () => { test = new Dictionary<string,string>(); test.Add("test", "test"); return test; }, (result) => { Assert.True(result.ContainsKey("test")); }); Or, the fluent way: Start<Dictionary<string, string>>.Work(() => { test = new Dictionary<string, string>(); test.Add("test", "test"); return test; }) .OnComplete((result) => { Assert.True(result.ContainsKey("test")); }) .Run(); You can also start a work to happen after some time using these methods: DispatcherTimer StartAfter(Action onComplete, TimeSpan duration) DispatcherTimer StartAfter(Action doWork,Action onComplete,TimeSpan duration) You can use this to perform some timed operation on the UI thread, as well as perform some operation in separate thread after some time. ParallelWork.StartAfter( () => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }, () => { workCompletedAt = DateTime.Now; }, waitDuration); Or, the fluent way: Start.Work(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }) .OnComplete(() => { workCompletedAt = DateTime.Now; }) .RunAfter(waitDuration);   There are several overloads of these functions to have a exception callback for handling exceptions or get progress update from background thread while work is in progress. For example, I use it in my PlantUmlEditor to perform background update of the application. // Check if there's a newer version of the app Start<bool>.Work(() => { return UpdateChecker.HasUpdate(Settings.Default.DownloadUrl); }) .OnComplete((hasUpdate) => { if (hasUpdate) { if (MessageBox.Show(Window.GetWindow(me), "There's a newer version available. Do you want to download and install?", "New version available", MessageBoxButton.YesNo, MessageBoxImage.Information) == MessageBoxResult.Yes) { ParallelWork.StartNow(() => { var tempPath = System.IO.Path.Combine( Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData), Settings.Default.SetupExeName); UpdateChecker.DownloadLatestUpdate(Settings.Default.DownloadUrl, tempPath); }, () => { }, (x) => { MessageBox.Show(Window.GetWindow(me), "Download failed. When you run next time, it will try downloading again.", "Download failed", MessageBoxButton.OK, MessageBoxImage.Warning); }); } } }) .OnException((x) => { MessageBox.Show(Window.GetWindow(me), x.Message, "Download failed", MessageBoxButton.OK, MessageBoxImage.Exclamation); }); The above code shows you how to get exception callbacks on the UI thread so that you can take necessary actions on the UI. Moreover, it shows how you can chain two parallel works to happen one after another. Sometimes you want to do some parallel work when user does some activity on the UI. For example, you might want to save file in an editor while user is typing every 10 second. In such case, you need to make sure you don’t start another parallel work every 10 seconds while a work is already queued. You need to make sure you start a new work only when there’s no other background work going on. Here’s how you can do it: private void ContentEditor_TextChanged(object sender, EventArgs e) { if (!ParallelWork.IsAnyWorkRunning()) { ParallelWork.StartAfter(SaveAndRefreshDiagram, TimeSpan.FromSeconds(10)); } } If you want to shutdown your application and want to make sure no parallel work is going on, then you can call the StopAll() method. ParallelWork.StopAll(); If you want to wait for parallel works to complete without a timeout, then you can call the WaitForAllWork(TimeSpan timeout). It will block the current thread until the all parallel work completes or the timeout period elapses. result = ParallelWork.WaitForAllWork(TimeSpan.FromSeconds(1)); The result is true, if all parallel work completed. If it’s false, then the timeout period elapsed and all parallel work did not complete. For details how this library is built and how it works, please read the following codeproject article: ParallelWork: Feature rich multithreaded fluent task execution library for WPF http://www.codeproject.com/KB/WPF/parallelwork.aspx If you like the article, please vote for me.

  Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >