Search Results

Search found 18003 results on 721 pages for 'nidhinzz own'.

Page 288/721 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

  • Can my laptop run dual 1080p (Sony Vaio - Nvidia 330M)

    - by Charlino
    I am looking to buy a monitor to setup dual monitors for my laptop and was wondering if my laptop could handle 2 x 1080p. I have a Sony Vaio VPCF116FG which has a Nvidia GeForce 330M chip and 1GB dedicated graphics memory. The laptop also has a Intel® Core™ i7-720QM Processor (1.60 GHz with Turbo Boost up to 2.80 GHz) but I don't know if that's relevant(?). The laptop screen has a native resolution of 1080p (1920 x 1080) so I'll be looking at buying a external monitor with 1080p to connect up using a HDMI cable. So, the question is, will my laptop be able to handle it's own 1080p screen AND an external 1080p screen? TIA, Charles

    Read the article

  • Can't figure out how to make Slitaz USB persistent

    - by Dennis Hodapp
    I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent. One told me to add "slitaz home=usb" to the syslinux.cfg file like this: append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb but it didn't work for me. http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically. custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008) does anyone know the best way to make the USB automatically persistent?

    Read the article

  • Transfer VLAN tagged packets over WLAN?

    - by stefan.at.wpf
    I have the following composition of devices: [selfmade router] - ethernet - [WLAN router 1] ----- wlan ------ [WLAN router 2] WLAN router 2 has 5 ethernet ports, each as an own VLAN, so 5 VLANs. I want to manage the routing and firewalling between those VLANs at selfmade router. What technique would I use to pass the tagged vlan packets from WLAN router 2 to selfmade router? Could I use a bridge from WLAN router 2 to WLAN router 1 which itself has a bridge from WLAN router 1 to selfmade router or do I have a wrong understanding of a bridge? Thanks for any hint on this :-)

    Read the article

  • Multiple stores for the same niche

    - by pandronic
    I started developing a new niche of products in my country about 3 years ago. That's when I opened my first store. Everything went fine, until a year ago, when someone I thought was a friend secretly stole my idea and made his own competing store. I was pretty upset when I caught him and decided to make it as difficult as possible for him, so I made another 4 stores, trying to get him as low as possible in the search results. The new sites have similar products (although not 100% identical), slightly different titles, images and prices. They look different and are built on different e-commerce platforms. They are all hosted on the same server, have roughly the same backlinks, use the same Google account for Analytics, have the same support phone numbers etc etc. I wasn't thinking that I'm doing something fishy, so I didn't try to hide anything. Trouble is that those sites, after doing fine for a few months, dropped like bricks in search results, almost to the point that they can't be found at all. At the moment, the only site that ranks relatively well is the original one and a couple of secondary pages with no importance from one of the other sites. How did this happen? Does Google have something against this practice? Did they take action by themselves when they realized that I was trying to monopolize this niche, or did my competitor report me for some kind of webspam? And more importantly, what do I do now? Do I shutdown all but my original site and 301 redirect users to it from the others? Can I report my competitor for engaging in the same practice? (He fought back and now he has 3-4 sites, some of which still rank kind of OKish, also he has no idea about web development, SEO or marketing, he just crudely copies what I do and is slowly but surely starting to do better than me).

    Read the article

  • Should I use 802.11n with a 15 Mbps ISP (Comcast Cable)?

    - by stackoverflowuser2010
    I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP. I know that 802.11n has a max bandwidth of 300 Mbps, and it would help for intra-house transfers, such as streaming video from one computer to another. But is there any benefit to 802.11n for Internet activity, such as web browswing, gaming, and streaming video from Netflix?

    Read the article

  • Looking for a very bare and basic blog system?

    - by Shedo Chung-Hee Surashu
    Does anyone know of a user-hosted blog which can be an alternative to WordPress only, it should only have the bare necessities of a blog. I'll just take it from there. It should only have the following: Admin Account (for posting, editing, etc) Archive System Posting System with character limitation (For the Read More links.) Accept Comments from other users (only requires the user's name and email and / or website, then the actual comment). Pages (Allows me to create pages for custom content.) The reason I want this is because WordPress is already too bloated up that there are a ton of features that I don't need. I'd mostly be satisfied with a blogging system that has the above feature-set and I'll just work my way to add my own feature as I require it along the way.

    Read the article

  • Does HTML 5 &ldquo;Rich vs. Reach&rdquo; a False Choice?

    - by andrewbrust
    The competition between the Web and proprietary rich platforms, including Windows, Mac OS, iPhone/iPad, Adobe’s Flash/AIR and Microsoft’s Silverlight, is not new. But with the emergence of HTML 5 and imminent support for it in the next release of the major Web browsers, the battle is heating up. And with the announcements made Wednesday at Google's I/O conference, it's getting kicked up yet another notch. The impact of this platform battle on companies in the media and advertising world, and the developers who serve them, is significant. The most prominent question is whether video and rich media online will shift towards pure HTML and away from plug-ins like Flash and Silverlight. In fact, certain features in HTML 5 make it suitable for development for line of business applications as well, further threatening those plug-in technologies. So what's the deal? Is this real or hype? To answer that question, I've done my own research into HTML 5's features and talked to several media-focused, New York area developers to get their opinions. I present my findings to you in this post. Before bearing down into HTML 5 specifics and practitioners’ quotes, let's set the context. To understand what HTML 5 can do, take a look at this video of Sports Illustrated’s HTML 5 prototype. This should start to get you bought into the idea that HTML 5 could be a game-changer. Next, if you happen to have installed the beta version of Google's Chrome 5 browser, take a look at the page linked to below, and in that page, click on any of the game thumbnails to see what's possible, without a plug-in, in this brave new world. (Note, although the instructions for each game tell you to press the A key to start, press the Z key instead.). Here's the link: http://www.kesiev.com/akihabara As an adjunct to what's enabled by HTML 5, consider the various transforms that are part of CSS 3. If you're running Safari as your browser, the following link will showcase this live; if not, you'll see a bitmap that will give you an idea of what's possible: http://webkit.org/blog/386/3d-transforms Are you starting to get the picture (literally)? What has up until now required browser plug-ins and other patches to HTML, most typically Flash, will soon be renderable, natively, in all major browsers. Moreover, it's looking likely that developers will be able to deliver such content and experiences in these browsers using one base of markup and script code (using straight JavaScript and/or jQuery), without resorting to browser-specific code and workarounds. If you're skeptical of this, I wouldn't blame you, especially with respect to Microsoft's Internet Explorer. However, i can tell you with confidence that even Microsoft is dedicated to full-on HTML 5 support in version 9 of that browser, which is currently under development. So what’s new in HTML 5, specifically, that makes sites like this possible?  The specification documents go into deep detail, and there’s no sense in rehashing them here, but a summary is probably in order.   Here is a non-authoritative, but useful, list of the major new feature areas in HTML 5: 2D drawing capabilities and 3D transforms. 2D drawing instructions can be embedded statically into a Web page; application interactivity and animation can be achieved through script.  As mentioned above, 3D transforms are technically part of version 3 of the CSS (Cascading Style Sheets) spec, rather than HTML 5, but they can nonetheless be thought of as part of the bundle.  They allow for rendering of 3D images and animations that, together with 2D drawing, make HTML-based games much more feasible than they are presently, as the links above demonstrate. Embedded audio and video. A media player can appear directly in a rendered Web page, using HTML markup and no plug-ins. Alternately, player controls can be hidden and the content can play automatically. Major enhancements to form-based input. This includes such things as specification of required fields, embedding of text “hints” into a control, limiting valid input on a field to dates, email addresses or a list of values.  There’s more to this, but the gist is that line-of-business applications, with complicated input and data validation, are supported directly Offline caching, local storage and client-side SQL database. These facilities allow Web applications to function more like native apps, even if no internet connection is available. User-defined data. Data (or metadata – data about data) can easily be embedded statically and/or retrieved and updated with Javascript code. This avoids having to embed that data in a separate file, or within script code. Taken together, these features position HTML to compete with, and perhaps overtake, Adobe’s Flash/AIR (and Microsoft’s Silverlight) as a viable Web platform for media, RIAs (rich internet applications – apps that function more like desktop software than Web sites) and interactive Web content, including games. What do players in the media world think about this?  From the embedded video above, we know what Sports Illustrated (and, therefore, Time Warner) think.  Hulu, the major Internet site for broadcast TV content, is on record as saying HTML5 video does not pass muster with them, at least not yet.  YouTube, on the other hand, already has an experimental HTML 5-based version of their site.  TechCrunch has reported that NetFlix is flirting with HTML 5 too, especially as it pertains to embedded browsers in TV-based devices.  And the New York Times’ Web site now embeds some video clips without resorting to Flash.  They have to – otherwise iPhone, iPod Touch and iPad users couldn’t see them in the Mobile Safari browser. What do media-focused developers think about all this?  I talked to several to get their opinions. Michael Pinto is CEO and Founder of Very Memorable Design whose primary focus has been to help marketing directors get traction online.  The firm’s client roster includes the likes Time, Inc., Scholastic and PBS.  Pinto predicts that “More and more microsites that were done entirely in Flash will be done more and more using jQuery. I can also see slideshows and video now being done without Flash. However if you needed to create a game or highly interactive activity Flash would still be the way to go for the web.” A dissenting view comes from Jesse Erlbaum, CEO of The Erlbaum Group, LLC, which serves numerous clients in the magazine publishing sector.  When I asked Erlbaum whether he thought HTML 5 and jQuery/JavaScript would steal significant market share from Flash, he responded “Not at all!  In particular, not for media and advertising customers!  These sectors are not generally in the business of making highly functional applications, which is the one place where HTML5/jQuery/etc really shines.” Ironically, Pinto’s firm is a heavy user of Flash for its projects and Erlbaum’s develops atop the “LAMP” (Linux, Apache, MySQL and PHP/Perl) stack.  For whatever reason, each firm seems to see the other’s toolset as a more viable choice.  But both agree that the developer tool story around HTML 5 is deficient.  Pinto explains “What’s lost with [HTML 5 and Javascript] techniques is that there isn’t a single widely favored easy-to-use tool of choice for authoring. So with Flash you can get up and running right away and not worry about what is different from one browser to the next.“  Erlbaum agrees, saying: “HTML5/Javascript lacks a sophisticated integrated development environment (IDE) which is an essential part of Flash.  If what someone is trying to make is primarily animation, it's a waste of time…to do this in Javascript.  It can be done much more easily in Flash, and with greater cross-browser compatibility and consistency due to the ubiquity of Flash.” Adobe (maker of Flash since its 2005 acquisition of Macromedia) likely agrees.  And for better or worse, they’ve decided to address this shortcoming of HTML 5, even at risk of diminishing their Flash platfrom. Yesterday Adobe announced that their hugely popular Deamweaver Web design authoring tool would directly support HTML 5 and CSS 3 development.  In fact, the Adobe Dreamweaver CS5 HTML5 Pack is downloadable now from Adobe Labs. Maybe Adobe is bowing to pressure from ardent Web professionals like Scott Kellum, Lead Designer at Channel V Media,  a digital and offline branding firm, serving the media and marketing sectors, among others.  Kellum told me that HTML 5 “…will definitely move people away from Flash. It has many of the same functionalities with faster load times and better accessibility. HTML5 will help Flash as well: with the new caching methods you can now even run Flash apps offline.” Although all three Web developers I interviewed would agree that Flash is still required for more sophisticated applications, Kellum seems to have put his finger on why HTML 5 may nonetheless dominate.  In his view, much of the Web development out there has little need for high-end capabilities: “Most people want to add a little punch to a navigation bar or some video and now you can get the biggest bang for your buck with HTML5, CSS3 and Javascript.” I’ve already mentioned that Google’s ongoing I/O conference, at the Moscone West center in San Francisco, is driving the HTML 5 news cycle, big time.  And Google made many announcements of their own, including the open sourcing of their VP8 video codec, new enterprise-oriented capabilities for its App Engine cloud offering, and the creation of the Chrome Web Store, which the company says will make it easier to find and “install” Web applications, in a fashion similar to  the way users procure native apps on various mobile platforms. HTML 5 looks to be disruptive, especially to the media world.  And even if the technology ends up disappointing, the chatter around it alone is causing big changes in the technology world.  If the richness it promises delivers, then magazine publishers and non-text digital advertisers may indeed have a platform for creating compelling content that loads quickly, is standards-based and will render identically in (the newest versions of) all major Web browsers.  Can this development in the digital arena save the titans of the print world?  I can’t predict, but it’s going to be fun to watch, and the competitive innovation from all players in both industries will likely be immense.

    Read the article

  • New Windows 7 Libraries created keep disappearing

    - by Sean
    I've just got a new laptop that came pre-installed with Windows 7 Professional edition. One of the new features of Windows 7 is Libraries. I'm familiar with how this works and am trying to create my own library called 'Work' to include all my work folders on my computer. However every time I create a new custom Library, after I rename it, it disappears from my Library menu. Each time I click Libraries in the Explorer, I keep seeing the same 4 default libraries, I.e. Documents, Pictures, Music, and Video. So when I try to create a new Library called 'Work' again, I get a pop up message "Do you want to rename New library to Work (2).Library-Microsoft?" Which means that my original work library still exists but for some reason I can't see it. Can someone please help me figure out why this is happening?

    Read the article

  • How to go to a website on a shared server by its ip address?

    - by user1502776
    I have a few questions, please help: Fist, I can access google search just by typing http://74.125.224.211 because this is the ip address returned by nslookup. However, I could not do so with ip addresses returned from www.yahoo.com. How do I go to yahoo search page by its ip ? Another example, http://www.allaboutcircuits.com will resolve to 68.233.243.63 by DNS server, but if I go to http://68.233.243.63 I got "Hello world!" , lol ! Second, for some reason, there is something wrong with DNS resolvers with my web hosting service (it will not be fixed !!). So command like, get_file_contents("http://www.allaboutcircuits.com"); will return php_network_getaddresses: getaddrinfo failed: Name or service not known How do I get around this with IP address , 68.233.243.63 I mean somehow attach the HTTP hostname parameter to get_file_contents() ? I would like to solve this on my own side (in my code), no troubleshooting/adjustment will be done by server admin.

    Read the article

  • Prebuilt ActiveMQ Server Based off ZeroMQ

    - by VxJasonxV
    Are there any distributions of fully built Message Brokers that are initially based off of ZeroMQ? I had thought that downloading/installing ZeroMQ would give me such, not just a handful of procedures for rolling me own. Currently we use ActiveMQ, but it is a miserable pain to configure, so I'd rather slim down the profile, unfortunately I learned that ZeroMQ was not a one step solution to achieving that goal. Alternatives are ok, but I'd prefer something less overly verbose in configuration than ActiveMQ's ludicrous amounts of Java configuration. Broker config + Java Logger Config + many other intricacies that I don't wish to deal with. (Read: Preferably not Java based in the first place.) I'm looking for reliable, basic functionality described by JMS brokers. Topics, Queues, Message Persistence, etc.

    Read the article

  • VMWare Fusion - Cannot communicate between Host Mac and Virtual Mac running on same machine [migrated]

    - by Jeff Gold
    I'm running a "virtual" Mac OS machine on a Mac running VMWare Fusion. The Virtual Mac is setup with Bridged Networking, and has its own separate IP address. The outside world can connect to either the Mac itself or the virtual Mac via their respective IP addresses just fine, this works great! The problem... the Mac itself cannot connect to the virtual Mac's IP address, nor can the virtual Mac connect to the real Mac's IP address. Some things I've read mention something about enabling VMCI, but I have no idea how to do this, or if this is even the correct solution. Any suggestions?

    Read the article

  • What Raid should I use for Website Static Files / Content

    - by Simon
    I'm building a Web server (IIS7) and would like to know the best practice for storing static content and the uploaded files of website's users (predominantly pictures, but also other documents like pdf's). I will keep the operating System on a Raid 1 array. Where should I be keeping the actual website's pages & files, it's own static content, and that of it's users? Should I be placing this content on a seperate raid array, and if so which type? I was considering using SLC SSD's (Such as the Intel's X25-e) but the following issues came to light. Will the SLC SSD's give any improvement over a 2.5" 15k SAS Drive for this type of content? If I did use SSD's, I'm under the belief I would still need to use Raid for redundancy, yet I've heard Intel X25-e's don't support TRIM. Does this scrap them as a legitimate option?

    Read the article

  • Are there any 5.1 surround audio switches on the market?

    - by thepurplepixel
    (Somewhat related to this question) I have a set of Logitech 5.1 surround speakers, which use 3 stereo 3.5mm TRS connectors (minijacks) to transfer the audio (the typical green/black/orange audio outputs). I have a Griffin Firewave hooked up to my MacBook Pro, and my desktop has a Realtek ALC889 audio chipset. I have looked for a way to, essentially, switch the speaker inputs between my Firewave and my desktop without having to disconnect the cables from one, route them around my desk, and plug them into the other. I'd love to have something like an old Belkin DB-25/LPT switch, but for these audio cables. Of course, purchasing one and soldering my own cables on the connection terminals is always an option, but, is there a reasonably priced 5.1 audio switch (or 3x stereo) on the market that will accomplish the simple task of switching audio outputs between two computers into a set of 5.1 speakers? Thanks in advance!

    Read the article

  • Citrix XenServer iSCSI shared disk?

    - by chsguy
    I am running Citrix XenServer Essentials 5.5, with VMs stored on an EqualLogic iSCSI shelf, using XenServer's StorageLink. I would like to create a "virtual disk" that can be attached to multiple VMs. This would be used for a cluster file system like OCFS2 or GFS. This doesn't seem possible using the XenCenter GUI and I can't find anything online about how to do it. I realize I could simply expose the iSCSI network to the VM and have the VM initiate its own iSCSI, but that creates a lot of security challenges. This was pretty easy to do on Oracle VM Server, which is Xen based, so I know it's not a limitation of Xen itself. Maybe there is an "xe-" command for this? Thanks for any suggestions you can provide.

    Read the article

  • #1 O’Reilly eBook for 2010

    - by Jan Goyvaerts
    The year-end issue of O’Reilly’s author newsletter discussed the trends O’Reilly has been seeing the past few years, and their predictions for 2011. The key trend is that digital is now more than ever poised to take over print: Our digitally distributed products have grown from 18.36% of our publishing mix in 2009 to 28.09% of our mix in 2010. What is more impressive is that our digitally distributed products have produced more than double the revenue that has been lost with the decline of print. I think this is important because some say that digital cannibalizes print products. Our data indicates the contrary, as print is declining much more slowly than digital is growing. I think we may be seeing developers purchasing a print book, and then purchasing the electronic editions to search and copying code from, as the incremental cost for digital is more than reasonable. My own book seems to be leading this trend. Thanks to everyone who purchased it! And the five bestselling O’Reilly ebook products for 2010: 1) Regular Expressions Cookbook, 2) jQuery Cookbook, 3) Learning Python, 4) HTML5: Up and Running, and 5) JavaScript Cookbook. I think it’s interesting that the top five ebooks are code-intensive books. They’re great products for search and code reuse. It’s also interesting that none of the top 5 ebooks made the top 5 of print books.

    Read the article

  • Where's my MD.070?

    - by Dave Burke
    In a previous Blog entry titled “Where’s My MD.050” I discussed how the OUM Analysis Specification is the “new-and-improved” version of the more traditional Functional Design Document (or MD.050 for Oracle AIM stalwarts). In a similar way, the OUM Design Specification is an evolution of what we used to call the Technical Design Document (or MD.070). Let’s dig a little deeper…… In a traditional software development process, the “Design Task” would include all the time and resources required to design the software component(s), AND to create the final Technical Design Document. However, in OUM, we have created distinct Tasks for pure design work, along with an optional Task for pulling all of that work together into a Design Specification. Some of the Design Tasks shown above will result in their own Work Products (i.e. an Architecture Description), whilst other Tasks would act as “placeholders” for a specific work effort. In any event, the DS.140 Design Specification can include a combination of unique content, along with links to other Work Products, together which enable a complete technical description of the component, or solution, being designed. So next time someone asks “where’s my MD.070” the short answer would be to tell them to read the OUM Task description for DS.140 – Design Specification!

    Read the article

  • Business guy building a software company [closed]

    - by Dreamer
    I am a business guy who is about to embark on a very risky journey to start this own software company. I have done sales for several software companies and in the last 8 years, I have managed to generate over $15 million in pure SAAS revenues for my employers. I think now its time to do it for myself and see where I can take the business. I have an idea in mind which I would like to develop and have been speaking with several companies who I may hire to convert that idea into a SAAS based offering. I am scared of the following: Being ripped off as I have no technical knowledge Over-charged Building something and realizing the foundation was weak, not scalable etc. Can anyone help me identify what I need to do before I sign a software development company to start my project. What do I need to know? What is the typical cost? What is a realistic time frame? Which coding language is better? What steps can I take to prevent myself from being ripped-off?

    Read the article

  • How do I PXE boot multiple Windows 7 desktops off the same image?

    - by Matt
    Some years ago in my uni days I recall that the uni labs booted windows nt over the network. There was a shared drive for your own stuff, and other than that any changes you did to the running OS were reset when you restarted the machine. Now I'd like to be able to do the same thing with Windows 7. I have found some howto's for this using iSCSI, but I don't want an iSCSI disk for every single PC, I'm wanting one image for multiple PC's. I've also found PXE Boot setups for installing windows locally, but that's not what I want either. How would I go about setting up what I had at uni but with Windows 7 as a OS to netboot? i.e. How do I netboot windows 7 images? I do not want to netboot a windows 7 installer to a pc to install windows locally, I want to run a windows 7 image from memory/network.

    Read the article

  • VSNewFile: A Visual Studio Addin to More Easily Add New Items to a Project

    - by InfinitiesLoop
    My first Visual Studio Add-in! Creating add-ins is pretty simple, once you get used to the CommandBar model it is using, which is apparently a general Office suite extensibility mechanism. Anyway, let me first explain my motivation for this. It started out as an academic exercise, as I have always wanted to dip my feet in a little VS extensibility. But I thought of a legitimate need for an add-in, at least in my personal experience, so it took on new life. But I figured I can’t be the only one who has felt this way, so I decided to publish the add-in, and host it on GitHub (VSNewFile on GitHub) hoping to spur contributions. Adding Files the Built-in Way Here’s the problem I wanted to solve. You’re working on a project, and it’s time to add a new file to the project. Whatever it is – a class, script, html page, aspx page, or what-have-you, you go through a menu or keyboard shortcut to get to the “Add New Item” dialog. Typically, you do it by right-clicking the location where you want the file (the project or a folder of it): This brings up a dialog the contains, well, every conceivable type of item you might want to add. It’s all the available item templates, which can result in anywhere from a ton to a veritable sea of choices. To be fair, this dialog has been revamped in Visual Studio 2010, which organizes it a little better than Visual Studio 2008, and adds a search box. It also loads noticeably faster.   To me, this dialog is just getting in my way. If I want to add a JavaScript script to my project, I don’t want to have to hunt for the script template item in this dialog. Yes, it is categorized, and yes, it now has a search box. But still, all this UI to swim through when all I need is a new file in the project. I will name it. I will provide the content, I don’t even need a ‘template’. VS kind of realizes this. In the add menu in a class library project, for example, there is a “Add Class…” choice. But all this really does is select that project item from the dialog by default. You still must wait for the dialog, see it, and type in a name for the file. How is that really any different than hitting F2 on an existing item? It isn’t. Adding Files the Hack Way What I often find myself doing, just to avoid going through this dialog, is to copy and paste an existing file, rename it, then “CTRL-A, DEL” the content. In a few short keystrokes I’ve got my new file. Even if the original file wasn’t the right type, it doesn’t matter – I will rename it anyway, including the extension. It works well enough if the place I am adding the file to doesn’t have much in it already. But if there are a lot of files at that level, it sucks, because the new file will have the name “Copy of xyz”, causing it to be moved into the ‘C’ section of the alphabetically sorted items, which might be far, far away from the original file (and so I tend to try and copy a file that starts with ‘C’ *evil grin*). Using ‘Export Template’ To be completely fair I should at least mention this feature. I’m not even sure if this is new in VS 2010 or not (I think so). But it allows you to export a project item or items, including potential project references required by it. Then it becomes a new item in the available ‘installed templates’. No doubt this is useful to help bootstrap new projects. But that still requires you to go through the ‘New Item’ dialog. Adding Files with VSNewFile So hopefully I have sufficiently defined the problem and got a few of you to think, “Yeah, me too!”… What VSNewFile does is let you skip the dialog entirely by adding project items directly to the context menu. But it does a bit more than that, so do read on. For example, to add a new class, you can right-click the location and pick that option. A new .cs file is instantly added to the project, and the new item is selected and put into the ‘rename’ mode immediately. The default items available are shown here. But you can customize them. You can also customize the content of each template. To do so, you create a directory in your documents folder, ‘VSNewFile Templates’. In there, you drop the templates you want to use, but you name them in a particular way. For example, here’s a template that will add a new item named “Add TITLE”. It will add a project item named “SOMEFILE.foo” (or ‘SOMEFILE1.foo’ if that exists, etc). The format of the file name is: <ORDER>_<KEY>_<BASE FILENAME>_<ICON ID>_<TITLE>.<EXTENTION> Where: <ORDER> is a number that lets you determine the order of the items in the menu (relative to each other). <KEY> is a case sensitive identifier different for each template item. More on that later. <BASE FILENAME> is the default name of the file, which doesn’t matter that much, since they will be renaming it anyway. <ICON ID> is a number the dictates the icon used for the menu item. There are a huge number of built-in choices. More on that later. <TITLE> is the string that will appear in the menu. And, the contents of the file are the default content for the item (the ‘template’). The content of the file can contain anything you want, of course. But it also supports two tokens: %NAMESPACE% and %FILENAME%, which will be replaced with the corresponding values. Here is the content of this sample: testing Namespace = %NAMESPACE% Filename = %FILENAME% I kind went back and forth on this. I could have made it so there’d be an XML or JSON file that defines the templates, instead of cramming all this data into the filename itself. I like the simplicity of this better. It makes it easy to customize since you can literally just throw these files around, copy them from someone else, etc, without worrying about merge data into a central description file, in whatever format. Here’s our new item showing up: Practical Use One immediate thing I am using this for is to make it easier to add very commonly used scripts to my web projects. For example, uh, say, jQuery? :) All I need to do is drop jQuery-1.4.2.js and jQuery-1.4.2.min.js into the templates folder, provide the order, title, etc, and then instantly, I can now add jQuery to any project I have without even thinking about “where is jQuery? Can I copy it from that other project?”   Using the KEY There are two reasons for the ‘key’ portion of the item. First, it allows you to turn off the built-in, default templates, which are: FILE = Add File (generic, empty file) VB = Add VB Class CS = Add C# Class (includes some basic usings) HTML = Add HTML page (includes basic structure, doctype, etc) JS = Add Script (includes an immediately-invoking function closure) To turn one off, just include a file with the name “_<KEY>”. For example, to turn off all the items except our custom one, you do this: The other reason for the key is that there are new Visual Studio Commands created for each one. This makes it possible to bind a keyboard shortcut to one of them. So you could, for example, have a keyboard combination that adds a new web page to your website, or a new CS class to your class library, etc. Here is our sample item showing up in the keyboard bindings option. Even though the contents of the template directory may change from one launch of Visual Studio to the next, the bindings will remain attached to any item with a particular key, thanks to it taking care not to lose keyboard bindings even though the commands are completely recreated each time. The Icon Face ID Visual Studio uses a Microsoft Office style add-in mechanism, I gather. There are a predetermined set of built-in icons available. You can use your own icons when developing add-ins, of course, but I’m no designer. I just wanted to find appropriate-ish icons for the built-in templates, and allow you to choose from an existing built-in icon for your own. Unfortunately, there isn’t a lot out there on the interwebs that helps you figure out what the built-in types are. There’s an MSDN article that describes at length a way to create a program that lists all the icons. But I don’t want to write a program to figure them out! Just show them to me! Sheesh :) Thankfully, someone out there felt the same way, and uses a novel hack to get the icons to show up in an outlook toolbar. He then painstakingly took screenshots of them, one group at a time. It isn’t complete though – there are tens of thousands of icons. But it’s good enough. If anyone has an exhaustive list, please let me, and the rest of the add-in community know. Icon Face ID Reference Installing the Add-in It will work with Visual Studio 2008 and Visual Studio 2010. Just unzip the release into your Documents\Visual Studio 20xx\Addins folder. It contains the binary and the Visual Studio “.addin” file. For example, the path to mine is: C:\Users\InfinitiesLoop\Documents\Visual Studio 2010\Addins Conclusion So that’s it! I hope you find it as useful as I have. It’s on GitHub, so if you’re into this kind of thing, please do fork it and improve it! Reference: VSNewFile on GitHub VSNewFile release on GitHub Icon Face ID Reference

    Read the article

  • Using Python on Mac

    - by choise
    hi, i want to learn python using my mac. now i want to setup a python version = 3.1.3, because my materials for learning are using this version. typing python into terminal results version 2.6.1, using the dmg installer on python.org (http://docs.python.org/ftp/python/3.1.3/) doesn't have an effect on the python version in terminal, but it's bundled with an own shell under Applications/Python 3.1/Idle.app my question now is, should i use this shell for learing or is there a better way, updating the python version bundled with snow leopard? i already tried defaults write com.apple.versioner.python Version 3.1.3 or defaults write com.apple.versioner.python Version 3.0 without any result. thanks!

    Read the article

  • Have to enter google sites through second-level domain

    - by Anton Geraschenko
    I'm having the same problem as this guy. I own two domains hosted on google sites, mydomain.com and mydomain.net. When I go to mydomain.com, it redirects me to the site located at www.mydomain.com (this is the desired behavior). This used to also work on mydomain.net, but now when I go to mydomain.net, I get a Google 404. To see the content, I have to go to www.mydomain.net. As far as I can tell, the DNS settings and Google apps settings for both domains are identical. Does anybody have any idea about what could be happening?

    Read the article

  • Filtering junk mail in Outlook 2007

    - by Faruz
    I keep getting mail which I try to filter as junk. Problem is, it is sent from my e-mail address while writing that the name of the sender is "Viagra yada yada yada ([email protected])" I can't add a rule to outlook according to sender's name, right? Is there any other way I can filter those e-mails (I can't add a rule to junk-mail my own e-mail address). The subject of the e-mails keeps changing in the following formats: "Faruz 76% discount now!" "Faruz 80% discount now!" "Now! 78% discount Faruz" (They seem to have infinite ideas of saying the same thing... :) ) So I also seem to have problems filtering according to subject. ideas?

    Read the article

  • Can I legally publish my Fortran 90 wrappers to nVidias CUFFT library (from CUDA SDK)?

    - by Jakub Narebski
    From a legal standpoint (licensing issues), can I legally in agreement with license publish Fortran 90 wrappers (bindings) to CUFFT library from nVidia CUDA Toolkit, under some open source license (either CC0 i.e. public domain, or some kind of permissive license like BSD). nVidia provides only C bindings with their CUDA SDK. Header files contain the following text: /* * Copyright 1993-2011 NVIDIA Corporation. All rights reserved. * * NOTICE TO LICENSEE: * * This source code and/or documentation ("Licensed Deliverables") are * subject to NVIDIA intellectual property rights under U.S. and * international Copyright laws. * * These Licensed Deliverables contained herein is PROPRIETARY and * CONFIDENTIAL to NVIDIA and is being provided under the terms and * conditions of a form of NVIDIA software license agreement by and * between NVIDIA and Licensee ("License Agreement") or electronically * accepted by Licensee. Notwithstanding any terms or conditions to * the contrary in the License Agreement, reproduction or disclosure * of the Licensed Deliverables to any third party without the express * written consent of NVIDIA is prohibited. The License.txt file includes the following fragment Source Code: Developer shall have the right to modify and create derivative works with the Source Code. Developer shall own any derivative works ("Derivatives") it creates to the Source Code, provided that Developer uses the Materials in accordance with the terms and conditions of this Agreement. Developer may distribute the Derivatives, provided that all NVIDIA copyright notices and trademarks are propagated and used properly and the Derivatives include the following statement: "This software contains source code provided by NVIDIA Corporation."

    Read the article

  • ubuntu 9.10 screen flickering problem on Thinkpad R31 with Intel 83830 Graphics

    - by PA
    I am trying to revitalize an old Thinkpad R31 that has the Intel 82830 graphics and only 256 MB of RAM. I have tried a Xubuntu 9.10 Live CD. After booting the screen blinks so much that it is practically unreadable. I have searched for updated IBM Thinkpad drivers but I only found drivers for Windows on the Thinkpad support web site. EDIT: I have changed the title and the description. It is not a problem of the drivers. It seems to be a problem with the kernel. See my own answer below.

    Read the article

  • Oracle is a Leader again in Gartner’s Magic Quadrant for E-commerce

    - by David Dorf
    Although e-commerce represents only 10% of the typical brick-and-mortar retailer’s sales, that percentage continues to climb.  So it’s no wonder that many retailers are considering the purchase of new e-commerce platforms to provide a commerce experience that keeps customers coming back.  And once again, Oracle and IBM lead the pack, identified as leaders in Gartner’s 2013 Magic Quadrant for E-Commerce along with hybris.  Many retailers are realizing the need to support Commerce Anywhere, allowing customers to interact with brands on their own terms.  Gartner reinforces this trend saying, “E-commerce is moving beyond just an online selling channel to integrated platforms delivering a unified customer experience. Traditionally, most organizations have been investing in the online channels with the objective of driving additional sales. However, customers increasingly are expecting a seamless buying experience across all channels, and e-commerce is a critical part of this evolution since it is a point where other channels are integrating to synchronize the customer experience across channels." Oracle saw this trend coming and acquired ATG, FatWire, and Endeca, all leaders in their respective markets, starting back in 2010.  The assets have been combined as Oracle Commerce and represent a comprehensive solution for retailers to sell via the Web while offering the best customer experience possible.  Retailers like JCPenney, American Apparel, and Kohl’s have recently licensed Oracle Commerce as part of their transformations. In the next two years we’ll begin to see more separation between the retailers that have a Commerce Anywhere strategy, and those that continue to flail with separate channels.  Integrating online and offline commerce, along with mobile and social aspects are becoming crucial to success in the industry.

    Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >