Search Results

Search found 17922 results on 717 pages for 'oracle products'.

Page 288/717 | < Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >

• Optimistic non-locking copy of InnoDB .frm files

  - by jothir

  MySQL Enterprise Backup(MEB) does hot backup of innodb data and log files. Till MEB 3.6.1, the user backs up the only innodb tables in a 3 step process: STEP 1. Take backup using --only-innodb option STEP 2. Temporarily make the table read only by executing “FLUSH TABLES WITH READ LOCK” MEB 3.7.0 has an enhancement to innodb file copying. The .frm files gets copied along with the hot backup done for innodb files. I would like to make the blog a little interactive by explaining the feature as answers: 1. What are these .frm files? The files containing the metadata, such as the table definition, of a MySQL table. For backups, the full set of .frm files are always required along with the backup data, to be able to restore tables that are altered or dropped after the backup. 2. Can the .frm files not be copied by MEB itself? --only-innodb-with-frm is the new option introduced in MEB 3.7.1 to do a copy of .frm files without locking the tables during backup operation itself. This is to reduce the pain of manually copying the .frm files. The option is intended for backups where you can ensure that no ALTER TABLE, CREATE TABLE, DROP TABLE, or other DDL statements modify the .frm files for InnoDB tables during the backup operation. 3. How is data consistency ensured? MEB does validation of the .frm files after copying by comparing with the server directory to see if the timestamps of any of the .frm files is greater than the saved system time (check .frm time).  This change in timestamp of the .frm files will show if a table is altered during the process of backup. The total number of frm files in the server directory is also verified against the copied contents. If the number of .frm files is less compared to server directory, it shows that table/tables have been dropped during the process of backup. If the number of .frm files is more compared to server directory, it shows that new table/tables have been created during backup operation. 4. How does MEB handle data inconsistency? MEB copies the .frm files through several iterations,  does the validation and throws a WARNING if there is any inconsistency found in .frm files at the end of backup operation. This means the user is warned of some DDL operations that had occurred during backup operation, and has to manually copy the .frm files or do a backup again. 5. What is the option and explain its usage? The option introduced is --only-innodb-with-frm which does optimistic copy of .frm files without locking. This can be used when the user wants to backup only innodb tables along with .frm files. The option can take one of the 2 values: all | related. --only-innodb-with-frm=all does copy of all .frm files of all innodb tables. --only-innodb-with-frm=related works in conjunction with --include option.This is to allow partial backup of .frm files corresponding to the tables specified in --include. Let me show the usage with example output: ./mysqlbackup -uroot --backup-dir=/logs/backupWithFrmAll --only-innodb-with-frm=all backup MySQL Enterprise Backup version 3.7.1 [2012/06/05] Copyright (c) 2003, 2012, Oracle and/or its affiliates. All Rights Reserved. INFO: Starting with following command line ... ./mysqlbackup -uroot --backup-dir=/logs/backupWithFrmAll        --only-innodb-with-frm=all backup INFO: Got some server configuration information from running server. IMPORTANT: Please check that mysqlbackup run completes successfully.            At the end of a successful 'backup' run mysqlbackup            prints "mysqlbackup completed OK!". --------------------------------------------------------------------                       Server Repository Options: --------------------------------------------------------------------  datadir                          =  /mysql/trydb/  innodb_data_home_dir             =    innodb_data_file_path            =  ibdata1:10M:autoextend  innodb_log_group_home_dir        =  /mysql/trydb/  innodb_log_files_in_group        =  2  innodb_log_file_size             =  5242880 --------------------------------------------------------------------                       Backup Config Options: --------------------------------------------------------------------  datadir                          =  /logs/backupWithFrmAll/datadir  innodb_data_home_dir             =  /logs/backupWithFrmAll/datadir  innodb_data_file_path            =  ibdata1:10M:autoextend  innodb_log_group_home_dir        =  /logs/backupWithFrmAll/datadir  innodb_log_files_in_group        =  2  innodb_log_file_size             =  5242880 mysqlbackup: INFO: Unique generated backup id for this is 13451979804504860 mysqlbackup: INFO: Uses posix_fadvise() for performance optimization. mysqlbackup: INFO: System tablespace file format is Antelope. mysqlbackup: INFO: Found checkpoint at lsn 1656792. mysqlbackup: INFO: Starting log scan from lsn 1656320. 120817 15:36:22 mysqlbackup: INFO: Copying log... 120817 15:36:22 mysqlbackup: INFO: Log copied, lsn 1656792.          We wait 1 second before starting copying the data files... 120817 15:36:23 mysqlbackup: INFO: Copying /mysql/trydb/ibdata1 (Antelope file format). 120817 15:36:23 mysqlbackup: INFO: Copying /mysql/trydb/innodb1/table2.ibd (Antelope file format). 120817 15:36:23 mysqlbackup: INFO: Copying /mysql/trydb/innodb1/table3.ibd (Antelope file format). 120817 15:36:23 mysqlbackup: INFO: Copying /mysql/trydb/innodb1/table1.ibd (Antelope file format). mysqlbackup: INFO: Opening backup source directory '/mysql/trydb/' 120817 15:36:23 mysqlbackup: INFO: Starting to backup .frm files in the subdirectories of /mysql/trydb/ mysqlbackup: INFO: Copying innodb data and logs during final stage ... mysqlbackup: INFO: A copied database page was modified at 1656792.          (This is the highest lsn found on page)          Scanned log up to lsn 1656792.          Was able to parse the log up to lsn 1656792.          Maximum page number for a log record 0 mysqlbackup: INFO: Copying non-innodb files took 2.000 seconds 120817 15:36:25 mysqlbackup: INFO: Full backup completed! mysqlbackup: INFO: Backup created in directory '/logs/backupWithFrmAll' -------------------------------------------------------------   Parameters Summary          -------------------------------------------------------------   Start LSN                  : 1656320   End LSN                    : 1656792 ------------------------------------------------------------- mysqlbackup completed OK! bash$ ls /logs/backupWithFrmAll/datadir/innodb1/ table1.frm  table1.ibd  table2.frm  table2.ibd  table3.frm  table3.ibd Here the backup directory contains all the .frm files of all the innodb tables. ./mysqlbackup -uroot --backup-dir=/logs/backupWithFrm --include="innodb1.table3.*" --only-innodb-with-frm=related backup MySQL Enterprise Backup version 3.7.1 [2012/06/05] Copyright (c) 2003, 2012, Oracle and/or its affiliates. All Rights Reserved. INFO: Starting with following command line ... ./mysqlbackup -uroot --backup-dir=/logs/backup371frm        --include=innodb1.table3.* --only-innodb-with-frm=related backup INFO: Got some server configuration information from running server. IMPORTANT: Please check that mysqlbackup run completes successfully.            At the end of a successful 'backup' run mysqlbackup            prints "mysqlbackup completed OK!". --------------------------------------------------------------------                       Server Repository Options: --------------------------------------------------------------------  datadir                          = /mysql/trydb/  innodb_data_home_dir             =    innodb_data_file_path            =  ibdata1:10M:autoextend  innodb_log_group_home_dir        =  /mysql/trydb  innodb_log_files_in_group        =  2  innodb_log_file_size             =  5242880 --------------------------------------------------------------------                       Backup Config Options: --------------------------------------------------------------------  datadir                          =  /logs/backupWithFrm/datadir  innodb_data_home_dir             =  /logs/backupWithFrm/datadir  innodb_data_file_path            =  ibdata1:10M:autoextend  innodb_log_group_home_dir        =  /logs/backupWithFrm/datadir  innodb_log_files_in_group        =  2  innodb_log_file_size             =  5242880 mysqlbackup: INFO: Unique generated backup id for this is 13451973458118162 mysqlbackup: INFO: Uses posix_fadvise() for performance optimization. mysqlbackup: INFO: The --include option specified: innodb1.table3.* mysqlbackup: INFO: System tablespace file format is Antelope. mysqlbackup: INFO: Found checkpoint at lsn 1656792. mysqlbackup: INFO: Starting log scan from lsn 1656320. 120817 15:25:47 mysqlbackup: INFO: Copying log... 120817 15:25:47 mysqlbackup: INFO: Log copied, lsn 1656792.          We wait 1 second before starting copying the data files... 120817 15:25:48 mysqlbackup: INFO: Copying /mysql/trydbibdata1 (Antelope file format). 120817 15:25:49 mysqlbackup: INFO: Copying /mysql/trydbinnodb1/table3.ibd (Antelope file format). mysqlbackup: INFO: Opening backup source directory '/mysql/trydb' 120817 15:25:49 mysqlbackup: INFO: Starting to backup .frm files in the subdirectories of /mysql/trydb mysqlbackup: INFO: Copying innodb data and logs during final stage ... mysqlbackup: INFO: A copied database page was modified at 1656792.          (This is the highest lsn found on page)          Scanned log up to lsn 1656792.          Was able to parse the log up to lsn 1656792.          Maximum page number for a log record 0 mysqlbackup: INFO: Copying non-innodb files took 2.000 seconds 120817 15:25:51 mysqlbackup: INFO: Full backup completed! mysqlbackup: INFO: Backup created in directory '/logs/backupWithFrm' -------------------------------------------------------------   Parameters Summary          -------------------------------------------------------------   Start LSN                  : 1656320   End LSN                    : 1656792 ------------------------------------------------------------- mysqlbackup completed OK! bash$ ls /logs/backupWithFrm/datadir/innodb1/ table3.frm table3.ibd Thus the backup directory contains only the .frm file matching the innodb table name specified in --include option. In a nutshell, we present our great new option --only-innodb-with-frm which is a true hot InnoDB-only backup with .frm files, but with an additional check, if any DDL happened during the backup. If a DDL has happened, the DBA can decide if to repeat the backup, or to live with the potential inconsistency. This is the ideal solution for users that have all their "real" data in InnoDB and seldom change their schemas. You may also like: http://dev.mysql.com/doc/mysql-enterprise-backup/3.7/en/backup-partial-options.html   STEP 3. Manually copy the .frm files of innodb tables to the destination directory where backup is stored.

  Read the article

• Simple GET operation with JSON data in ADF Mobile

  - by PadmajaBhat

  Usecase: This sample uses a RESTful service which contains a GET method that fetches employee details for an employee with given employee ID along with other methods. The data is fetched in JSON format. This RESTful service is then invoked via ADF Mobile and the JSON data thus obtained is parsed and rendered in mobile in a table. Prerequisite: Download JDev build JDEVADF_11.1.2.4.0_GENERIC_130421.1600.6436.1 or higher with mobile support.  Steps: Run EmployeeService.java in JSONService.zip. This is a simple service with a method, getEmpById(id) that takes employee ID as parameter and produces employee details in JSON format. Copy the target URL generated on running this service. The target URL will be as shown below: http://127.0.0.1:7101/JSONService-Project1-context-root/jersey/project1 Now, let us invoke this service in our mobile application. For this, create an ADF Mobile application.  Name the application JSON_SearchByEmpID and finish the wizard. Now, let us create a connection to our service. To do this, we create a URL Connection. Invoke new gallery wizard on ApplicationController project.  Select URL Connection option. In the Create URL Connection window, enter connection name as ‘conn’. For URL endpoint, supply the URL you copied earlier on running the service. Remember to use your system IP instead of localhost. Test the connection and click OK. At this point, a connection to the REST service has been created. Since JSON data is not supported directly in WSDC wizard, we need to invoke the operation through Java code using RestServiceAdapter. For this, in the ApplicationController project, create a Java class called ‘EmployeeDC’. We will be creating DC from this class. Add the following code to the newly created class to invoke the getEmpById method. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 public Employee fetchEmpDetails(){ RestServiceAdapter restServiceAdapter = Model.createRestServiceAdapter(); restServiceAdapter.clearRequestProperties(); restServiceAdapter.setConnectionName("conn"); //URL connection created with this name restServiceAdapter.setRequestType(RestServiceAdapter.REQUEST_TYPE_GET); restServiceAdapter.addRequestProperty("Content-Type", "application/json"); restServiceAdapter.addRequestProperty("Accept", "application/json; charset=UTF-8"); restServiceAdapter.setRetryLimit(0); restServiceAdapter.setRequestURI("/getById/"+inputEmpID); String response = ""; JSONBeanSerializationHelper jsonHelper = new JSONBeanSerializationHelper(); try { response = restServiceAdapter.send(""); //Invoke the GET operation System.out.println("Response received!"); Employee responseObject = (Employee) jsonHelper.fromJSON(Employee.class, response); return responseObject; } catch (Exception e) { } return null; } Here, in lines 2 to 9, we create the RestServiceAdapter and set various properties required to invoke the web service. At line 4, we are pointing to the connection ‘conn’ created previously. Since we want to invoke getEmpById method of the service, which is defined by the URL http://IP:7101/REST_Sanity_JSON-Project1-context-root/resources/project1/getById/{id} we are updating the request URI to point to this URI at line 9. inputEmpID is a variable that will hold the value input by the user for employee ID. This we will be creating in a while. As the method we are invoking is a GET operation and consumes json data, these properties are being set in lines 5 through 7. Finally, we are sending the request in line 13. In line 15, we use jsonHelper.fromJSON to convert received JSON data to a Java object. The required Java objects' structure is defined in class Employee.java whose structure is provided later. Since the response from our service is a simple response consisting of attributes like employee Id, name, design etc, we will just return this parsed response (line 16) and use it to create DC. As mentioned previously, we would like the user to input the employee ID for which he/she wants to perform search. So, in the same class, define a variable inputEmpID which will hold the value input by the user. Generate accessors for this variable. Lastly, we need to create Employee class. Employee class will define how we want to structure the JSON object received from the service. To design the Employee class, run the services’ method in the browser or via analyzer using path parameter as 1. This will give you the output JSON structure. Ours is a simple service that returns a JSONObject with a set of data. Hence, Employee class will just contain this set of data defined with the proper data types. Create Employee.java in the same project as EmployeeDC.java and write the below code: package application; import oracle.adfmf.java.beans.PropertyChangeListener; import oracle.adfmf.java.beans.PropertyChangeSupport; public class Employee { private String dept; private String desig; private int id; private String name; private int salary; private PropertyChangeSupport propertyChangeSupport = new PropertyChangeSupport(this); public void setDept(String dept) {         String oldDept = this.dept; this.dept = dept; propertyChangeSupport.firePropertyChange("dept", oldDept, dept); } public String getDept() { return dept; } public void setDesig(String desig) { String oldDesig = this.desig; this.desig = desig; propertyChangeSupport.firePropertyChange("desig", oldDesig, desig); } public String getDesig() { return desig; } public void setId(int id) { int oldId = this.id; this.id = id; propertyChangeSupport.firePropertyChange("id", oldId, id); } public int getId() { return id; } public void setName(String name) { String oldName = this.name; this.name = name; propertyChangeSupport.firePropertyChange("name", oldName, name); } public String getName() { return name; } public void setSalary(int salary) { int oldSalary = this.salary; this.salary = salary; propertyChangeSupport.firePropertyChange("salary", oldSalary, salary); } public int getSalary() { return salary; } public void addPropertyChangeListener(PropertyChangeListener l) { propertyChangeSupport.addPropertyChangeListener(l); } public void removePropertyChangeListener(PropertyChangeListener l) { propertyChangeSupport.removePropertyChangeListener(l);     } } Now, let us create a DC out of EmployeeDC.java.  DC as shown below is created. Now, you can design the mobile page as usual and invoke the operation of the service. To design the page, go to ViewController project and locate adfmf-feature.xml. Create a new feature called ‘SearchFeature’ by clicking the plus icon. Go the content tab and add an amx page. Call it SearchPage.amx. Call it SearchPage.amx. Remove primary and secondary buttons as we don’t need them and rename the header. Drag and drop inputEmpID from the DC palette onto Panel Page in the structure pane as input text with label. Next, drop fetchEmpDetails method as an ADF button. For a change, let us display the output in a table component instead of the usual form. However, you will notice that if you drag and drop Employee onto the structure pane, there is no option for ADF Mobile Table. Hence, we will need to create the table on our own. To do this, let us first drop Employee as an ADF Read -Only form. This step is needed to get the required bindings. We will be deleting this form in a while. Now, from the Component palette, search for ‘Table Layout’. Drag and drop this below the command button.  Within the tablelayout, insert ‘Row Layout’ and ‘Cell Format’ components. Final table structure should be as shown below. Here, we have also defined some inline styling to render the UI in a nice manner. <amx:tableLayout id="tl1" borderWidth="2" halign="center" inlineStyle="vertical-align:middle;" width="100%" cellPadding="10"> <amx:rowLayout id="rl1" > <amx:cellFormat id="cf1" width="30%"> <amx:outputText value="#{bindings.dept.hints.label}" id="ot7" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf2"> <amx:outputText value="#{bindings.dept.inputValue}" id="ot8" /> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl2"> <amx:cellFormat id="cf3" width="30%"> <amx:outputText value="#{bindings.desig.hints.label}" id="ot9" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf4" > <amx:outputText value="#{bindings.desig.inputValue}" id="ot10"/> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl3"> <amx:cellFormat id="cf5" width="30%"> <amx:outputText value="#{bindings.id.hints.label}" id="ot11" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf6" > <amx:outputText value="#{bindings.id.inputValue}" id="ot12"/> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl4"> <amx:cellFormat id="cf7" width="30%"> <amx:outputText value="#{bindings.name.hints.label}" id="ot13" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf8"> <amx:outputText value="#{bindings.name.inputValue}" id="ot14"/> </amx:cellFormat> </amx:rowLayout> <amx:rowLayout id="rl5"> <amx:cellFormat id="cf9" width="30%"> <amx:outputText value="#{bindings.salary.hints.label}" id="ot15" inlineStyle="color:rgb(0,148,231);"/> </amx:cellFormat> <amx:cellFormat id="cf10"> <amx:outputText value="#{bindings.salary.inputValue}" id="ot16"/> </amx:cellFormat> </amx:rowLayout>     </amx:tableLayout> The values used in the output text of the table come from the bindings obtained from the ADF Form created earlier. As we have used the bindings and don’t need the form anymore, let us delete the form.  One last thing before we deploy. When user changes employee ID, we want to clear the table contents. For this we associate a value change listener with the input text box. Click New in the resulting dialog to create a managed bean. Next, we create a method within the managed bean. For this, click on the New button associated with method. Call the method ‘empIDChange’. Open myClass.java and write the below code in empIDChange(). public void empIDChange(ValueChangeEvent valueChangeEvent) { // Add event code here... //Resetting the values to blank values when employee id changes AdfELContext adfELContext = AdfmfJavaUtilities.getAdfELContext(); ValueExpression ve = AdfmfJavaUtilities.getValueExpression("#{bindings.dept.inputValue}", String.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.desig.inputValue}", String.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.id.inputValue}", int.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.name.inputValue}", String.class); ve.setValue(adfELContext, ""); ve = AdfmfJavaUtilities.getValueExpression("#{bindings.salary.inputValue}", int.class); ve.setValue(adfELContext, ""); } That’s it. Deploy the application to android emulator or device. Some snippets from the app.

  Read the article

• Selling Federal Enterprise Architecture (EA)

  - by TedMcLaughlan

  Selling Federal Enterprise Architecture A taxonomy of subject areas, from which to develop a prioritized marketing and communications plan to evangelize EA activities within and among US Federal Government organizations and constituents. Any and all feedback is appreciated, particularly in developing and extending this discussion as a tool for use – more information and details are also available. "Selling" the discipline of Enterprise Architecture (EA) in the Federal Government (particularly in non-DoD agencies) is difficult, notwithstanding the general availability and use of the Federal Enterprise Architecture Framework (FEAF) for some time now, and the relatively mature use of the reference models in the OMB Capital Planning and Investment (CPIC) cycles. EA in the Federal Government also tends to be a very esoteric and hard to decipher conversation – early apologies to those who agree to continue reading this somewhat lengthy article. Alignment to the FEAF and OMB compliance mandates is long underway across the Federal Departments and Agencies (and visible via tools like PortfolioStat and ITDashboard.gov – but there is still a gap between the top-down compliance directives and enablement programs, and the bottom-up awareness and effective use of EA for either IT investment management or actual mission effectiveness. "EA isn't getting deep enough penetration into programs, components, sub-agencies, etc.", verified a panelist at the most recent EA Government Conference in DC. Newer guidance from OMB may be especially difficult to handle, where bottom-up input can't be accurately aligned, analyzed and reported via standardized EA discipline at the Agency level – for example in addressing the new (for FY13) Exhibit 53D "Agency IT Reductions and Reinvestments" and the information required for "Cloud Computing Alternatives Evaluation" (supporting the new Exhibit 53C, "Agency Cloud Computing Portfolio"). Therefore, EA must be "sold" directly to the communities that matter, from a coordinated, proactive messaging perspective that takes BOTH the Program-level value drivers AND the broader Agency mission and IT maturity context into consideration. Selling EA means persuading others to take additional time and possibly assign additional resources, for a mix of direct and indirect benefits – many of which aren't likely to be realized in the short-term. This means there's probably little current, allocated budget to work with; ergo the challenge of trying to sell an "unfunded mandate". Also, the concept of "Enterprise" in large Departments like Homeland Security tends to cross all kinds of organizational boundaries – as Richard Spires recently indicated by commenting that "...organizational boundaries still trump functional similarities. Most people understand what we're trying to do internally, and at a high level they get it. The problem, of course, is when you get down to them and their system and the fact that you're going to be touching them...there's always that fear factor," Spires said. It is quite clear to the Federal IT Investment community that for EA to meet its objective, understandable, relevant value must be measured and reported using a repeatable method – as described by GAO's recent report "Enterprise Architecture Value Needs To Be Measured and Reported". What's not clear is the method or guidance to sell this value. In fact, the current GAO "Framework for Assessing and Improving Enterprise Architecture Management (Version 2.0)", a.k.a. the "EAMMF", does not include words like "sell", "persuade", "market", etc., except in reference ("within Core Element 19: Organization business owner and CXO representatives are actively engaged in architecture development") to a brief section in the CIO Council's 2001 "Practical Guide to Federal Enterprise Architecture", entitled "3.3.1. Develop an EA Marketing Strategy and Communications Plan." Furthermore, Core Element 19 of the EAMMF is advised to be applied in "Stage 3: Developing Initial EA Versions". This kind of EA sales campaign truly should start much earlier in the maturity progress, i.e. in Stages 0 or 1. So, what are the understandable, relevant benefits (or value) to sell, that can find an agreeable, participatory audience, and can pave the way towards success of a longer-term, funded set of EA mechanisms that can be methodically measured and reported? Pragmatic benefits from a useful EA that can help overcome the fear of change? And how should they be sold? Following is a brief taxonomy (it's a taxonomy, to help organize SME support) of benefit-related subjects that might make the most sense, in creating the messages and organizing an initial "engagement plan" for evangelizing EA "from within". An EA "Sales Taxonomy" of sorts. We're not boiling the ocean here; the subjects that are included are ones that currently appear to be urgently relevant to the current Federal IT Investment landscape. Note that successful dialogue in these topics is directly usable as input or guidance for actually developing early-stage, "Fit-for-Purpose" (a DoDAF term) Enterprise Architecture artifacts, as prescribed by common methods found in most EA methodologies, including FEAF, TOGAF, DoDAF and our own Oracle Enterprise Architecture Framework (OEAF). The taxonomy below is organized by (1) Target Community, (2) Benefit or Value, and (3) EA Program Facet - as in: "Let's talk to (1: Community Member) about how and why (3: EA Facet) the EA program can help with (2: Benefit/Value)". Once the initial discussion targets and subjects are approved (that can be measured and reported), a "marketing and communications plan" can be created. A working example follows the Taxonomy. Enterprise Architecture Sales Taxonomy Draft, Summary Version 1. Community 1.1. Budgeted Programs or Portfolios Communities of Purpose (CoPR) 1.1.1. Program/System Owners (Senior Execs) Creating or Executing Acquisition Plans 1.1.2. Program/System Owners Facing Strategic Change 1.1.2.1. Mandated 1.1.2.2. Expected/Anticipated 1.1.3. Program Managers - Creating Employee Performance Plans 1.1.4. CO/COTRs – Creating Contractor Performance Plans, or evaluating Value Engineering Change Proposals (VECP) 1.2. Governance & Communications Communities of Practice (CoP) 1.2.1. Policy Owners 1.2.1.1. OCFO 1.2.1.1.1. Budget/Procurement Office 1.2.1.1.2. Strategic Planning 1.2.1.2. OCIO 1.2.1.2.1. IT Management 1.2.1.2.2. IT Operations 1.2.1.2.3. Information Assurance (Cyber Security) 1.2.1.2.4. IT Innovation 1.2.1.3. Information-Sharing/ Process Collaboration (i.e. policies and procedures regarding Partners, Agreements) 1.2.2. Governing IT Council/SME Peers (i.e. an "Architects Council") 1.2.2.1. Enterprise Architects (assumes others exist; also assumes EA participants aren't buried solely within the CIO shop) 1.2.2.2. Domain, Enclave, Segment Architects – i.e. the right affinity group for a "shared services" EA structure (per the EAMMF), which may be classified as Federated, Segmented, Service-Oriented, or Extended 1.2.2.3. External Oversight/Constraints 1.2.2.3.1. GAO/OIG & Legal 1.2.2.3.2. Industry Standards 1.2.2.3.3. Official public notification, response 1.2.3. Mission Constituents Participant & Analyst Community of Interest (CoI) 1.2.3.1. Mission Operators/Users 1.2.3.2. Public Constituents 1.2.3.3. Industry Advisory Groups, Stakeholders 1.2.3.4. Media 2. Benefit/Value (Note the actual benefits may not be discretely attributable to EA alone; EA is a very collaborative, cross-cutting discipline.) 2.1. Program Costs – EA enables sound decisions regarding... 2.1.1. Cost Avoidance – a TCO theme 2.1.2. Sequencing – alignment of capability delivery 2.1.3. Budget Instability – a Federal reality 2.2. Investment Capital – EA illuminates new investment resources via... 2.2.1. Value Engineering – contractor-driven cost savings on existing budgets, direct or collateral 2.2.2. Reuse – reuse of investments between programs can result in savings, chargeback models; avoiding duplication 2.2.3. License Refactoring – IT license & support models may not reflect actual or intended usage 2.3. Contextual Knowledge – EA enables informed decisions by revealing... 2.3.1. Common Operating Picture (COP) – i.e. cross-program impacts and synergy, relative to context 2.3.2. Expertise & Skill – who truly should be involved in architectural decisions, both business and IT 2.3.3. Influence – the impact of politics and relationships can be examined 2.3.4. Disruptive Technologies – new technologies may reduce costs or mitigate risk in unanticipated ways 2.3.5. What-If Scenarios – can become much more refined, current, verifiable; basis for Target Architectures 2.4. Mission Performance – EA enables beneficial decision results regarding... 2.4.1. IT Performance and Optimization – towards 100% effective, available resource utilization 2.4.2. IT Stability – towards 100%, real-time uptime 2.4.3. Agility – responding to rapid changes in mission 2.4.4. Outcomes –measures of mission success, KPIs – vs. only "Outputs" 2.4.5. Constraints – appropriate response to constraints 2.4.6. Personnel Performance – better line-of-sight through performance plans to mission outcome 2.5. Mission Risk Mitigation – EA mitigates decision risks in terms of... 2.5.1. Compliance – all the right boxes are checked 2.5.2. Dependencies –cross-agency, segment, government 2.5.3. Transparency – risks, impact and resource utilization are illuminated quickly, comprehensively 2.5.4. Threats and Vulnerabilities – current, realistic awareness and profiles 2.5.5. Consequences – realization of risk can be mapped as a series of consequences, from earlier decisions or new decisions required for current issues 2.5.5.1. Unanticipated – illuminating signals of future or non-symmetric risk; helping to "future-proof" 2.5.5.2. Anticipated – discovering the level of impact that matters 3. EA Program Facet (What parts of the EA can and should be communicated, using business or mission terms?) 3.1. Architecture Models – the visual tools to be created and used 3.1.1. Operating Architecture – the Business Operating Model/Architecture elements of the EA truly drive all other elements, plus expose communication channels 3.1.2. Use Of – how can the EA models be used, and how are they populated, from a reasonable, pragmatic yet compliant perspective? What are the core/minimal models required? What's the relationship of these models, with existing system models? 3.1.3. Scope – what level of granularity within the models, and what level of abstraction across the models, is likely to be most effective and useful? 3.2. Traceability – the maturity, status, completeness of the tools 3.2.1. Status – what in fact is the degree of maturity across the integrated EA model and other relevant governance models, and who may already be benefiting from it? 3.2.2. Visibility – how does the EA visibly and effectively prove IT investment performance goals are being reached, with positive mission outcome? 3.3. Governance – what's the interaction, participation method; how are the tools used? 3.3.1. Contributions – how is the EA program informed, accept submissions, collect data? Who are the experts? 3.3.2. Review – how is the EA validated, against what criteria?  Taxonomy Usage Example:   1. To speak with: a. ...a particular set of System Owners Facing Strategic Change, via mandate (like the "Cloud First" mandate); about... b. ...how the EA program's visible and easily accessible Infrastructure Reference Model (i.e. "IRM" or "TRM"), if updated more completely with current system data, can... c. ...help shed light on ways to mitigate risks and avoid future costs associated with NOT leveraging potentially-available shared services across the enterprise... 2. ....the following Marketing & Communications (Sales) Plan can be constructed: a. Create an easy-to-read "Consequence Model" that illustrates how adoption of a cloud capability (like elastic operational storage) can enable rapid and durable compliance with the mandate – using EA traceability. Traceability might be from the IRM to the ARM (that identifies reusable services invoking the elastic storage), and then to the PRM with performance measures (such as % utilization of purchased storage allocation) included in the OMB Exhibits; and b. Schedule a meeting with the Program Owners, timed during their Acquisition Strategy meetings in response to the mandate, to use the "Consequence Model" for advising them to organize a rapid and relevant RFI solicitation for this cloud capability (regarding alternatives for sourcing elastic operational storage); and c. Schedule a series of short "Discovery" meetings with the system architecture leads (as agreed by the Program Owners), to further populate/validate the "As-Is" models and frame the "To Be" models (via scenarios), to better inform the RFI, obtain the best feedback from the vendor community, and provide potential value for and avoid impact to all other programs and systems. --end example -- Note that communications with the intended audience should take a page out of the standard "Search Engine Optimization" (SEO) playbook, using keywords and phrases relating to "value" and "outcome" vs. "compliance" and "output". Searches in email boxes, internal and external search engines for phrases like "cost avoidance strategies", "mission performance metrics" and "innovation funding" should yield messages and content from the EA team. This targeted, informed, practical sales approach should result in additional buy-in and participation, additional EA information contribution and model validation, development of more SMEs and quick "proof points" (with real-life testing) to bolster the case for EA. The proof point here is a successful, timely procurement that satisfies not only the external mandate and external oversight review, but also meets internal EA compliance/conformance goals and therefore is more transparently useful across the community. In short, if sold effectively, the EA will perform and be recognized. EA won’t therefore be used only for compliance, but also (according to a validated, stated purpose) to directly influence decisions and outcomes. The opinions, views and analysis expressed in this document are those of the author and do not necessarily reflect the views of Oracle.

  Read the article

• MySQL 5.5 : sortie imminente ? Oracle devrait annoncer la nouvelle version du SGBD open-source mercredi

  MySQL 5.5 : sortie imminente ? Oracle devrait annoncer la nouvelle version du SGBD open-source mercredi Mise à jour du 13/12/10 Ce mercredi, Oracle organise un webinar pour présenter « une mise à jour importante de MySQL ». Tomas Ulin, Vice-Président du développement de MySQL et Rob Young, Senior Product Manager, y dévoileront les dernières avancées du SGBD open-source que le géant des bases de données à récupérée avec le rachat de Sun. Oracle avait annoncé une RC de MySQL 5,5 lors de l'Oracle OpenWorld de septembre (lire ci-avant). Cette fois-ci, les responsables du projets pourraient annoncer sa disponibilité officielle.

  Read the article

• Les spécifications de Java SE 7 et 8 proposées par Oracle sont adoptées « à une écrasante majorité » par le Comité Exécutif du JCP

  Les spécifications de Java SE 7 et 8 proposées par Oracle sont adoptées « A une écrasante majorité » par le Comité Exécutif du JCP Mise à jour du 07/12/10 Oracle vient d'annoncer que ses propositions pour les spécifications des deux prochaines versions de la plate-forme Java (ses « Java Specification Requests » ou (JSR)) ont été adoptées après un vote du Comité Exécutif du JCP. Oracle précise que ce vote, concernant les JSR 336 et 337, s'est soldé par une « écrasante majorité » en sa faveur, sans autres précision sur les chiffres du scrutin. La feuille de route, désormais approuvée, prévoit une standardisation de...

  Read the article

• Measuring Social Media Efforts

  - by David Dorf

  So you're on the bandwagon and you've created a Facebook page, you're tweeting everyday, and maybe you've even got a YouTube channel. Now what? After you put any program in place, you need to measure, set new goals, then execute and this is no different. But how does one measure social media efforts? First, I guess we need some goals. Typical ones might be to acquire customers, engage them, then convert them. So that translates to: Increase Facebook fans and Twitter followers Increase comments/posting and retweets Increase redemption of offers via Facebook and Twitter Counting fans and followers is easy, and tracking the redemption of coupons isn't that hard either, but measuring engagement is a tough one. How do you know whether your fans are reading your posts, and whether your posts have any meaning to them? For Facebook, the fan page administrator has access to analytics called Facebook Insights. There you can check weekly metrics such as total fans, new fans, lost fans, demographics of fans, number of postings, numbers clicks, etc. Not nearly as comprehensive as Google Analytics, but well on its way. For Twitter, getting information is a little tougher. Again, its easy to track followers and you can use tools like TweetMeme to encourage and track retweets. An interesting website called WeFollow tries to measure influence for certain topics. For example, the top three influencers for the topic "retail" are retailweek, retailwire, and retailerdaily. Other notables are #10 BestBuy, #11 GapOfficial, #12 JeffPR, and #17 OracleRetail. I assume influence is calculated based on number of followers, number of retweets, frequency of tweets, and perhaps depth of dialogs. If you want to get serious about monitoring and measuring social marketing efforts, you'd be wise to invest in a strong tool. Several are listed on this wiki, including big ones like Radian6, Nielsen, Omniture, and Buzzient. Buzzient might be particularly interesting because its integrated with Oracle CRM OnDemand -- see the demo. As always, I'm interested in hearing how others approach goal setting and monitoring of social media efforts, so feel free to post comments.

  Read the article

• Next Phase of ECM 11g Now Available - New UCM & URM 11g, & Updated I/PM & IRM 11g

  - by michelle.huff

  We're excited to announce that the Oracle Enterprise Content Management Suite 11g is now available! Today, Oracle announced ECM Suite 11g, a part of Fusion Middleware 11gR1 Patchset 2 release, which builds upon the Imaging and Process Management (I/PM) and Information Rights Management (IRM) 11g release earlier this year. Universal Content Management (UCM) and Universal Records Management (URM) 11g are now available with many new features and enhancements. All ECM products are localized into 27 languages, use a single repository, a single installer, centralized administration, and all run on the same Fusion Middleware tech stack. Oracle ECM Suite 11g, is better integrated to fit the way you work, with extreme performance and extreme scalability. Universal Content Management One click Web content management - brings Web content management authoring, design and presentation capabilities directly into how organizations design sites, portals, and custom Web applications. Simply take in the right amount of WCM that meets your needs - all without having to rewrite the application or port it over to a new technology stack or framework. Greater business user empowerment - with next generation desktop integrations and "smart productivity folders", new Web site "design mode" for business users, and enhanced rich media support enabling users to better work with photography, graphics, videos & podcasts created today as well as contribute content within Flash files directly from the Web. Advanced manageability with extreme performance & scalability - centralized system monitoring, installation, logging, performance metrics & diagnostics, with new built in "fast check-in" features, redesigned component management interface - all running on Fusion Middleware infrastructure. Universal Records Management Enhanced user experience: Oracle URM 11g makes records management easier for both business users and records administrators. Simplifications in the end user experience allow the creation of bookmarks into often-used part of the file plan, easy copying of categories and dispositions, and integrated folder and records search. The records management dashboard provides a consolidated view into records administrator tasks and system performance. DoD 5015.02 v3: Oracle URM is fully certified against all part of the US Department of Defense records management standard - baseline, classified, and Freedom of Information and Privacy Act. This enables Federal, state, & local governments & public agencies, as well as private companies, to maintain regulated compliance. Expanded functionality through Oracle integrations: Oracle URM 11g allows for an expanded set of functionality through integration capabilities with other Oracle products. This includes configurable records definition capabilities directly within a UCM instance. An out of the box integration with Oracle BI Publisher provides easily configured and robust reporting. Additionally, 11g offers an out of the box Oracle Secure Enterprise Search integration enabling real time full text discovery across disparate systems in an organization. Read the Press Release Watch the 3 Minute ECM 11g Video Get Up to Speed with the What's New in ECM Suite Datasheet Learn More on OTN with new tutorials, downloads and whitepapers

  Read the article

• Fed Authentication Methods in OIF / IdP

  - by Damien Carru

  This article is a continuation of my previous entry where I explained how OIF/IdP leverages OAM to authenticate users at runtime: OIF/IdP internally forwards the user to OAM and indicates which Authentication Scheme should be used to challenge the user if needed OAM determine if the user should be challenged (user already authenticated, session timed out or not, session authentication level equal or higher than the level of the authentication scheme specified by OIF/IdP…) After identifying the user, OAM internally forwards the user back to OIF/IdP OIF/IdP can resume its operation In this article, I will discuss how OIF/IdP can be configured to map Federation Authentication Methods to OAM Authentication Schemes: When processing an Authn Request, where the SP requests a specific Federation Authentication Method with which the user should be challenged When sending an Assertion, where OIF/IdP sets the Federation Authentication Method in the Assertion Enjoy the reading! Overview The various Federation protocols support mechanisms allowing the partners to exchange information on: How the user should be challenged, when the SP/RP makes a request How the user was challenged, when the IdP/OP issues an SSO response When a remote SP partner redirects the user to OIF/IdP for Federation SSO, the message might contain data requesting how the user should be challenged by the IdP: this is treated as the Requested Federation Authentication Method. OIF/IdP will need to map that Requested Federation Authentication Method to a local Authentication Scheme, and then invoke OAM for user authentication/challenge with the mapped Authentication Scheme. OAM would authenticate the user if necessary with the scheme specified by OIF/IdP. Similarly, when an IdP issues an SSO response, most of the time it will need to include an identifier representing how the user was challenged: this is treated as the Federation Authentication Method. When OIF/IdP issues an Assertion, it will evaluate the Authentication Scheme with which OAM identified the user: If the Authentication Scheme can be mapped to a Federation Authentication Method, then OIF/IdP will use the result of that mapping in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled If the Authentication Scheme cannot be mapped, then OIF/IdP will set the Federation Authentication Method as the Authentication Scheme name in the outgoing SSO response: AuthenticationStatement in the SAML Assertion OpenID Response, if PAPE is enabled Mappings In OIF/IdP, the mapping between Federation Authentication Methods and Authentication Schemes has the following rules: One Federation Authentication Method can be mapped to several Authentication Schemes In a Federation Authentication Method <-> Authentication Schemes mapping, a single Authentication Scheme is marked as the default scheme that will be used to authenticate a user, if the SP/RP partner requests the user to be authenticated via a specific Federation Authentication Method An Authentication Scheme can be mapped to a single Federation Authentication Method Let’s examine the following example and the various use cases, based on the SAML 2.0 protocol: Mappings defined as: urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapped to LDAPScheme, marked as the default scheme used for authentication BasicScheme urn:oasis:names:tc:SAML:2.0:ac:classes:X509 mapped to X509Scheme, marked as the default scheme used for authentication Use cases: SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:X509 as the RequestedAuthnContext: OIF/IdP will authenticate the use with X509Scheme since it is the default scheme mapped for that method. SP sends an AuthnRequest specifying urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the RequestedAuthnContext: OIF/IdP will authenticate the use with LDAPScheme since it is the default scheme mapped for that method, not the BasicScheme SP did not request any specific methods, and user was authenticated with BasisScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with LDAPScheme: OIF/IdP will issue an Assertion with urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport as the FederationAuthenticationMethod SP did not request any specific methods, and user was authenticated with BasisSessionlessScheme: OIF/IdP will issue an Assertion with BasisSessionlessScheme as the FederationAuthenticationMethod, since that scheme could not be mapped to any Federation Authentication Method (in this case, the administrator would need to correct that and create a mapping) Configuration Mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. Authentication Schemes As discussed in the previous article, during Federation SSO, OIF/IdP will internally forward the user to OAM for authentication/verification and specify which Authentication Scheme to use. OAM will determine if a user needs to be challenged: If the user is not authenticated yet If the user is authenticated but the session timed out If the user is authenticated, but the authentication scheme level of the original authentication is lower than the level of the authentication scheme requested by OIF/IdP So even though an SP requests a specific Federation Authentication Method to be used to challenge the user, if that method is mapped to an Authentication Scheme and that at runtime OAM deems that the user does not need to be challenged with that scheme (because the user is already authenticated, session did not time out, and the session authn level is equal or higher than the one for the specified Authentication Scheme), the flow won’t result in a challenge operation. Protocols SAML 2.0 The SAML 2.0 specifications define the following Federation Authentication Methods for SAML 2.0 flows: urn:oasis:names:tc:SAML:2.0:ac:classes:unspecified urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocol urn:oasis:names:tc:SAML:2.0:ac:classes:Telephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:PersonalTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:PreviousSession urn:oasis:names:tc:SAML:2.0:ac:classes:MobileOneFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:Smartcard urn:oasis:names:tc:SAML:2.0:ac:classes:Password urn:oasis:names:tc:SAML:2.0:ac:classes:InternetProtocolPassword urn:oasis:names:tc:SAML:2.0:ac:classes:X509 urn:oasis:names:tc:SAML:2.0:ac:classes:TLSClient urn:oasis:names:tc:SAML:2.0:ac:classes:PGP urn:oasis:names:tc:SAML:2.0:ac:classes:SPKI urn:oasis:names:tc:SAML:2.0:ac:classes:XMLDSig urn:oasis:names:tc:SAML:2.0:ac:classes:SoftwarePKI urn:oasis:names:tc:SAML:2.0:ac:classes:Kerberos urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport urn:oasis:names:tc:SAML:2.0:ac:classes:SecureRemotePassword urn:oasis:names:tc:SAML:2.0:ac:classes:NomadTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:AuthenticatedTelephony urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorUnregistered urn:oasis:names:tc:SAML:2.0:ac:classes:MobileTwoFactorContract urn:oasis:names:tc:SAML:2.0:ac:classes:SmartcardPKI urn:oasis:names:tc:SAML:2.0:ac:classes:TimeSyncToken Out of the box, OIF/IdP has the following mappings for the SAML 2.0 protocol: Only urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml20-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 2.0 An example of an AuthnRequest message sent by an SP to an IdP with the SP requesting a specific Federation Authentication Method to be used to challenge the user would be: <samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://idp.com/oamfed/idp/samlv20" ID="id-8bWn-A9o4aoMl3Nhx1DuPOOjawc-" IssueInstant="2014-03-21T20:51:11Z" Version="2.0">  <saml:Issuer ...>https://acme.com/sp</saml:Issuer>  <samlp:NameIDPolicy AllowCreate="false" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/>  <samlp:RequestedAuthnContext Comparison="minimum">    <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">      urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef>  </samlp:RequestedAuthnContext></samlp:AuthnRequest> An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                    urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> An administrator would be able to specify a mapping between a SAML 2.0 Federation Authentication Method and one or more OAM Authentication Schemes SAML 1.1 The SAML 1.1 specifications define the following Federation Authentication Methods for SAML 1.1 flows: urn:oasis:names:tc:SAML:1.0:am:unspecified urn:oasis:names:tc:SAML:1.0:am:HardwareToken urn:oasis:names:tc:SAML:1.0:am:password urn:oasis:names:tc:SAML:1.0:am:X509-PKI urn:ietf:rfc:2246 urn:oasis:names:tc:SAML:1.0:am:PGP urn:oasis:names:tc:SAML:1.0:am:SPKI urn:ietf:rfc:3075 urn:oasis:names:tc:SAML:1.0:am:XKMS urn:ietf:rfc:1510 urn:ietf:rfc:2945 Out of the box, OIF/IdP has the following mappings for the SAML 1.1 protocol: Only urn:oasis:names:tc:SAML:1.0:am:password is defined This Federation Authentication Method is mapped to: LDAPScheme, marked as the default scheme used for authentication FAAuthScheme BasicScheme BasicFAScheme This mapping is defined in the saml11-sp-partner-profile SP Partner Profile which is the default OOTB SP Partner Profile for SAML 1.1 An example of an Assertion issued by an IdP would be: <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameID ...>[email protected]</saml:NameID>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Note: SAML 1.1 does not define an AuthnRequest message. An administrator would be able to specify a mapping between a SAML 1.1 Federation Authentication Method and one or more OAM Authentication Schemes OpenID 2.0 The OpenID 2.0 PAPE specifications define the following Federation Authentication Methods for OpenID 2.0 flows: http://schemas.openid.net/pape/policies/2007/06/phishing-resistant http://schemas.openid.net/pape/policies/2007/06/multi-factor http://schemas.openid.net/pape/policies/2007/06/multi-factor-physical Out of the box, OIF/IdP does not define any mappings for the OpenID 2.0 Federation Authentication Methods. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. An example of an OpenID 2.0 Request message sent by an SP/RP to an IdP/OP would be: https://idp.com/openid?openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=checkid_setup&openid.claimed_id=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.identity=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0%2Fidentifier_select&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.realm=https%3A%2F%2Facme.com%2Fopenid&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_request&openid.ax.type.attr0=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.if_available=attr0&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.max_auth_age=0 An example of an Open ID 2.0 SSO Response issued by an IdP/OP would be: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will provide examples on how to configure OIF/IdP for the various protocols, to map OAM Authentication Schemes to Federation Authentication Methods.Cheers,Damien Carru

  Read the article

• Where’s my MD.050?

  - by Dave Burke

  A question that I’m sometimes asked is “where’s my MD.050 in OUM?” For those not familiar with an MD.050, it serves the purpose of being a Functional Design Document (FDD) in one of Oracle’s legacy Methods. Functional Design Documents have existed for many years with their primary purpose being to describe the functional aspects of one or more components of an IT system, typically, a Custom Extension of some sort. So why don’t we have a direct replacement for the MD.050/FDD in OUM? In simple terms, the disadvantage of the MD.050/FDD approach is that it tends to lead practitioners into “Design mode” too early in the process. Whereas OUM encourages more emphasis on gathering, and describing the functional requirements of a system ahead of the formal Analysis and Design process. So that just means more work up front for the Business Analyst or Functional Consultants right? Well no…..the design of a solution, particularly when it involves a complex custom extension, does not necessarily take longer just because you put more thought into the functional requirements. In fact, one could argue the complete opposite, in that by putting more emphasis on clearly understanding the nuances of functionality requirements early in the process, then the overall time and cost incurred during the Analysis to Design process should be less. In short, as your understanding of requirements matures over time, it is far easier (and more cost effective) to update a document or a diagram, than to change lines of code. So how does that translate into Tasks and Work Products in OUM? Let us assume you have reached a point on a project where a Custom Extension is needed. One of the first things you should consider doing is creating a Use Case, and remember, a Use Case could be as simple as a few lines of text reflecting a “User Story”, or it could be what Cockburn1 describes a “fully dressed Use Case”. It is worth mentioned at this point the highly scalable nature of OUM in the sense that “documents” should not be produced just because that is the way we have always done things. Some projects may well be predicated upon a base of electronic documents, whilst other projects may take a much more Agile approach to describing functional requirements; through “User Stories” perhaps. In any event, it is quite common for a Custom Extension to involve the creation of several “components”, i.e. some new screens, an interface, a report etc. Therefore several Use Cases might be required, which in turn can then be assembled into a Use Case Package. Once you have the Use Cases attributed to an appropriate (fit-for-purpose) level of detail, and assembled into a Package, you can now create an Analysis Model for the Package. An Analysis Model is conceptual in nature, and depending on the solution being developing, would involve the creation of one or more diagrams (i.e. Sequence Diagrams, Collaboration Diagrams etc.) which collectively describe the Data, Behavior and Use Interface requirements of the solution. If required, the various elements of the Analysis Model may be indexed via an Analysis Specification. For Custom Extension projects that follow a pure Object Orientated approach, then the Analysis Model will naturally support the development of the Design Model without any further artifacts. However, for projects that are transitioning to this approach, then the various elements of the Analysis Model may be represented within the Analysis Specification. If we now return to the original question of “Where’s my MD.050”. The full answer would be: Capture the functional requirements within a Use Case Group related Use Cases into a Package Create an Analysis Model for each Package Consider creating an Analysis Specification (AN.100) as a index to each Analysis Model artifact An alternative answer for a relatively simple Custom Extension would be: Capture the functional requirements within a Use Case Optionally, group related Use Cases into a Package Create an Analysis Specification (AN.100) for each package 1 Cockburn, A, 2000, Writing Effective Use Case, Addison-Wesley Professional; Edition 1

  Read the article

• Oracle présente « Cloud File System », son nouveau système de fichiers destiné à faciliter le déploiement des Clouds privés

  Oracle présente « Cloud File System », son nouveau système de fichiers Destiné à faciliter le déploiement des Clouds privés Oracle vient d'annoncer la disponibilité d'un nouveau système de fichiers destiné à faciliter le déploiement des applications et des bases de données des entreprises dans le Cloud privé. Baptisé « Oracle Cloud File System », ce système devrait apporter aux Clouds de stockage les mécanismes avancés des systèmes de fichiers en grappe, rendant ainsi plus efficace la mise en commun du stockage à travers un Cloud extensible et accessible en réseau. Ce système aide les entreprises à se munir d'un espace de stockage partagé et doté d'un espace...

  Read the article

• Java : Oracle lance un framework de développement mobile, « ADF Mobile Client » est compatible avec BlackBerry et Windows Mobile

  Java : Oracle lance un framework de développement mobile « ADF Mobile Client » est compatible avec BlackBerry et Windows Mobile Oracle sort une extension de son « Application Development Framework » (ADF) avec un kit de développement qui permettrait de porter les applications d'entreprises écrites en Java à plusieurs plates-formes mobiles. ADF Mobile Client devrait simplifier la création et le déploiement des applications en utilisant un seul et unique framework standardisé d'interface utilisateur pour tous les périphériques supportés, incluant pour l'heure les BlackBerry et Windows Mobile, et ce sans devoir redévelopper ou retoucher les applications. Oracle estime ...

  Read the article

• Do You Know How OUM defines the four, basic types of business system testing performed on a project? Why not test your knowledge?

  - by user713452

  Testing is perhaps the most important process in the Oracle® Unified Method (OUM). That makes it all the more important for practitioners to have a common understanding of the various types of functional testing referenced in the method, and to use the proper terminology when communicating with each other about testing activities. OUM identifies four basic types of functional testing, which is sometimes referred to as business system testing.  The basic functional testing types referenced by OUM include: Unit Testing Integration Testing System Testing, and  Systems Integration Testing See if you can match the following definitions with the appropriate type above? A.  This type of functional testing is focused on verifying that interfaces/integration between the system being implemented (i.e. System under Discussion (SuD)) and external systems functions as expected. B.     This type of functional testing is performed for custom software components only, is typically performed by the developer of the custom software, and is focused on verifying that the several custom components developed to satisfy a given requirement (e.g. screen, program, report, etc.) interact with one another as designed. C.  This type of functional testing is focused on verifying that the functionality within the system being implemented (i.e. System under Discussion (SuD)), functions as expected.  This includes out-of-the -box functionality delivered with Commercial Off-The-Shelf (COTS) applications, as well as, any custom components developed to address gaps in functionality.  D.  This type of functional testing is performed for custom software components only, is typically performed by the developer of the custom software, and is focused on verifying that the individual custom components developed to satisfy a given requirement  (e.g. screen, program, report, etc.) functions as designed.   Check your answers below: (D) (B) (C) (A) If you matched all of the functional testing types to their definitions correctly, then congratulations!  If not, you can find more information in the Testing Process Overview and Testing Task Overviews in the OUM Method Pack.

  Read the article

• CRMIT’s HIGH VALUE CRM++ PLUGINS FOR CRM On DEMAND

  - by Soumo Das

  Customer satisfaction and experience being the two most considerable factors, these days businesses are on the lookout for automation tools that are world class, agile and keep quality at its core. CRMIT has developed such tools using cutting edge technologies and abstracting industry best practices and R&D.  Self Service Portal  With customers being so meticulous about regular updates and reliable access to their data, administrators just cannot think of walking a thin line. Surviving without a resource that provides a track of customer requirements for services available 24 x 7 can severely affect the productivity. In such a scenario, CRMIT’s Self Service Portal (SSP) is the best solution. This not only tracks the required customer data, but also allows companies to stay in tune with their employees, vendors and stakeholders.   One can directly sign up to become a CRMOD contact and SSP user. One need not use the database, as operations and interactions are d at run time. This is a fully configurable solution that tracks results periodically, thus making it easy for end users. It also offers better security and data visibility that enables users to progress smoothly. Quote and Order Management   When dealing with quotes, contracts and orders becomes complicated, only Quote & Order Management can work as a one-stop solution. CRMIT offers this great tool for managing all this information and for taking care of customer orders and service requirements.  This CRM On Demand plug-in allows one to create a new quote or copy the existing one. Products can be directly added from the product list of CRMOD and the pricing is calculated automatically. Quote can be generated and mailed to the external users in PDF, HTML and XLS formats. This not only allows management of quotes in an enhanced manner, but also supports various billing and tax calculation features that make work effortless.    Report Scheduler  When it comes to analyzing and providing statistics of various business processes currently running in an organization, one cannot depend on manual updates, which sometimes may be inaccurate or even delayed. CRMIT provides a SaaS based powerful solution - Report Scheduler - that allows CRM users to schedule reports as per the frequencies and then receive them as email attachments at the scheduled time.   With this powerful tool, administrators can control the report scheduler for assigning specific reports to specific users. After that, users can login and schedule any assigned report for viewing at particular intervals on monthly, weekly or daily basis. Additionally, users can also copy the mail to external users and can choose the preferred format. The best part is that sharing business data with third party become easy with this and for viewing reports, users need not log into their CRMOD account.  CRM On Demand Offline Solution CRM On-Demand Offline is another great CRM++ extension that allows one to work in both online and offline modes. Synchronizing both the modes is absolutely easy and offers ease while working. CRM OD offline works as an automation tool that not only improves efficiency, but also works as a backup in most cases. It is readily available as a windows application installer and requires users to be online only while validating and synchronizing. The best part is that working in the offline mode also works as a backup. 

  Read the article

• “Cloud Integration in Minutes” – True or False?

  - by Bruce Tierney

  The short answer is “yes”. Connecting on-premise and cloud applications “in minutes” is true…provided you only consider the connectivity subset of integration and have a small number of cloud integration touch points. At the recent Gartner AADI conference, 230 attendees filled up the Oracle session to get a more comprehensive answer to this question. During the session, titled “Simplifying Integration – The Cloud & Mobile Pre-requisite”, Oracle’s Tim Hall described cloud connectivity and then, equally importantly, the other essential and sometimes overlooked aspects of integration required to ensure a long term application and service integration strategy. To understand the challenges and opportunities faced by cloud integration, the session started off with a slide that describes how connectivity can quickly transition from simplicity to complexity as the number of applications and service vendor instances grows: Increased complexity puts increased demand on the integration platform As companies expand from on-premise applications into a hybrid on-premise/cloud infrastructure with support for mobile, cloud, and social, there is a new sense of urgency to implement a unified and comprehensive service integration platform. Without getting this unified platform in place, companies face increased complexity and cost managing a growing patchwork of niche integration toolsets as well as the disparate standards mandated by each SaaS vendor as shown in the image below: dddddddddddddddddddd Incomplete and overlapping offerings from a patchwork of niche vendors Also at Gartner AADI, Oracle SOA Suite customer Geeta Pyne, Director of Middleware at BMC presented their successful strategy on how BMC efficiently manages their cloud integration despite disparate requirements from each vendor. From one of Geeta’s slide: Interfaces are dictated by SaaS vendors; wide variety (SOAP, REST, Socket, HTTP/POX, SFTP); Flexibility of Oracle Service Bus/SOA Suite helps to support Every vendor has their way to handle Security; WS-Security, Custom Header; Support in Oracle Service Bus helps to adhere to disparate requirements At BMC, the flexibility of Oracle Service Bus and Oracle SOA Suite allowed them to support the wide variation in the functional requirements as mandated by their SaaS vendors. In contrast to the patchwork platform approach of escalating complexity from overlapping SaaS toolkits, Oracle’s strategy is to provide a unified platform to support disparate requirements from your SaaS vendors, on-premise apps, legacy apps, and more. Furthermore, Oracle SOA Suite includes the many aspects of comprehensive integration beyond basic connectivity including orchestration, analytics (BAM, events…), service virtualization and more in a single unified interface. Oracle SOA Suite – Unified and comprehensive To summarize, yes you can achieve “cloud integration in minutes” when considering the connectivity subset of integration but be sure to look for ways to simplify as you consider a more comprehensive view of integration beyond basic connectivity such as service virtualization, management, event processing and more. And finally, be sure your integration platform has the deep flexibility to handle the requirements of all your future SaaS applications…many of which are unknown to you now.

  Read the article

• Cloud Application Management for Platforms

  - by user756764

  Today Oracle, along with CloudBees, Cloudsoft, Huawei, Rackspace, Red Hat, and Software AG, published the Cloud Application Management for Platforms (CAMP) specification. This spec deals with application management in the context of PaaS. It defines a model (consisting of a set resources and their relationships), a REST-based API for manipulating that model, and a packaging format for getting applications (and their attendant metadata) into and out of the platform. My colleague, Mark Carlson, has already provided an excellent writeup on the spec here. The following, additional points bear emphasizing: CAMP is language, framework and platform neutral; it should be equally applicable to the task of deploying and managing Ruby on Rails applications as Java/Spring applications (as Node.js applications, etc.) CAMP only covers the interactions between a Cloud Consumer and a Cloud Provider (using the definitions of these terms provided in the NIST Cloud Computing Reference Architecture). The internal APIs used by the Cloud Provider to, for example, deploy additional platform services (e.g. a new message queuing service) are out of CAMP's scope. CAMP supports the management of the entire lifecycle of the application (e.g. start/stop, suspend/resume, etc.) not just the deployment of the components that make up the application. Complexity is the antithesis of interoperability. One of CAMP's goals is to be as broadly interoperable as possible. To this end, the authors of CAMP tried to "make things as simple as possible, but no simpler". For example, JSON is the only serialization format used in the spec (although Providers can extend this to support additional serialization formats such as XML). It remains to be seen whether we can preserve this simplicity as the spec is processed by OASIS. So far, those who have indicated an interest in collaborating on the spec seem to be of a like mind with regards to the need for simplicity. The flip side to simplicity is the knowledge that you undoubtedly missed something that is important to someone. To make up for this, CAMP is designed to be extensible. The idea is to ship what we know will work, allow implementers to extend the spec, then re-factor the spec to incorporate the most popular extensions. Anyone interested in this effort, particularly those of you using PaaS-level services, is encouraged to join the forthcoming OASIS TC. As you may have noticed, CAMP is a bit of a departure from some of the more monolithic management standards that have preceded it. The idea is to develop simple, discrete standards targeted to address specific interoperability and portability problems and tie these standards together with common patterns based on REST and HATEOAS. I'm excited to see how this idea plays out.

  Read the article

• Eloadásaim: IQSYS BI Symposium, 2010. ápr. 14.

  - by Fekete Zoltán

  2010. ápr. 14-én lesz a következo IQSYS BI Symposium, ahol az Oracle arany fokozatú támogató. A nap folyamán ketto eloadást is tartok: - 15:15 Az Oracle Exadata/Database Machine rendszer: üzleti és technikai elonyök, Fekete Zoltán (Oracle) - 14:25 Az Oracle üzleti intelligencia és EPM rendszer áttekintése, Fekete Zoltán (Oracle)

  Read the article

• Oracle demande 211 millions de dollars de plus à SAP au titre des intérêts des 1,3 milliards du verdict de l'affaire TomorrowNow

  Oracle demande 211 millions de dollars supplémentaires à SAP Au titre des intérêts des 1,3 milliards du verdict de l'affaire TomorrowNow Mise à jour du 13/12/10 Chez Oracle, un sou est un sou. SAP le savait déjà, mais l'éditeur Allemand en a aujourd'hui la confirmation. Condamné à verser la somme record de 1,3 milliards de dollars à Oracle dans l'affaire TomorrowNow, sur fond de violation de copyright, d'espionnage industriel et de démarchage illégal de clientèle (lire ci-avant), SAP risque de devoir remettre la main à son porte-monnaie. Oracle lui réclame en effet 211 millions supplémentaires au titre des intérêts des 1,3 mil...

  Read the article

• Még egy kis Iron Man 2...

  - by Fekete Zoltán

  Az Oracle website-on az Iron Man 2 oldalon található sok információ többek között ezekrol a témákról: - Oracle Cloud Computing - Exadata, Sun Oracle Database Machine - Oracle Enterprise Manager Megnézhetjük az Iron Man 2 trailert is: Iron Man 2 oldalon, továbbá a speciális Oracle szoftver és hardverrol is szóló mozi elozetes megmutatja mit jelent ez a kombináció az innovatív cégeknek.

  Read the article

• 11gR2 DB 11.2.0.1 Certified with E-Business Suite on Solaris 10 (x86-64)

  - by Steven Chan

  Oracle Database 11g Release 2 version 11.2.0.1 is now certified with Oracle E-Business Suite 11i (11.5.10.2) and Release 12 (12.0.4 or higher, 12.1.1 or higher) on Oracle Solaris on x86-64 (64-bit) running Solaris 10. This announcement includes:Oracle Database 11gR2 version 11.2.0.1 Oracle Database 11gR2 version 11.2.0.1 Real Application Clusters (RAC) Transparent Data Encryption (TDE) Column Encryption with EBS 11i and R12Advanced Security Option (ASO)/Advanced Networking Option (ANO) Export/Import Process for E-Business Suite 11i and R12 Database Instances Transparent Data Encryption (TDE) Tablespace Encryption

  Read the article

• 2 Days to Go before MySQL Connect - Focus on Hands-On Labs

  - by Bertrand Matthelié

  72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The Oracle MySQL team is very eager to meet all MySQL community members, users, customers and partners gathering this weekend in San Francisco for MySQL Connect! Eight different Hands-On Labs will give you the opportunity to get hands-on experience on the following topics. All taking place in Plaza Room A. Saturday: 11.30 amDeveloping Applications with MySQL and Java—Mark Matthews, Oracle 1.00 pm (2.5 hours long)Getting Started with MySQL—Gillian Gunson and Alfredo Kojima, Oracle 4.00 pmGetting Started with MySQL Cluster—Santo Leto, Oracle 5.30 pmImproving Performance with the MySQL Performance Schema—Jesper Krogh, Oracle Sunday: 10.15 am (2.5 hours long) Focus on MySQL Replication—Sven Sandberg and Luis Soares, Oracle 1.15 pm MySQL Utilities—Charles Bell, Oracle 2.45 pm Performance Tuning with MySQL Enterprise Monitor—Mark Matthews, Oracle 4.15 pm MySQL Security: Authentication and Audit—Jonathon Coombes, Oracle Not registered yet? You can still save US$ 300 off the on-site fee! Attending Oracle openWorld or JavaOne? Add MySQL Connect to your registration for only US$100! Register Now!

  Read the article

• Refreshing imported MySQL data with MySQL for Excel

  - by Javier Rivera

  Welcome to another blog post from the MySQL for Excel Team. Today we're going to talk about a new feature included since MySQL for Excel 1.3.0, you can install the latest GA or maintenance version using the MySQL Installer or optionally you can download directly any GA or non-GA version from the MySQL Developer Zone.As some users suggested in our forums we should be maintaining the link between tables and Excel not only when editing data through the Edit MySQL Data option, but also when importing data via Import MySQL Data. Before 1.3.0 this process only provided you with an offline copy of the Table's data into Excel and you had no way to refresh that information from the DB later on. Now, with this new feature we'll show you how easy is to work with the latest available information at all times. This feature is transparent to you (it doesn't require additional steps to work as long as the users had the Create an Excel Table for the imported MySQL table data option enabled. To ensure you have this option checked, click over Advanced Options... after the Import Data dialog is displayed). The current blog post assumes you already know how to import data into excel, you could always take a look at our previous post How To - Guide to Importing Data from a MySQL Database to Excel using MySQL for Excel if you need further reference on that topic. After importing Data from a MySQL Table into Excel, you can refresh the data in 3 ways.1. Simply right click over the range of the imported data, to show the pop-up menu: Click over the Refresh button to obtain the latest copy of the data in the table. 2. Click the Refresh button on the Data ribbon: 3. Click the Refresh All button in the Data ribbon (beware this will refresh all Excel tables in the Workbook): Please take a note of a couple of details here, the first one is about the size of the table. If by the time you refresh the table new columns had been added to it, and you originally have imported all columns, the table will grow to the right. The same applies to rows, if the table has new rows and you did not limit the results , the table will grow to to the bottom of the sheet in Excel. The second detail you should take into account is this operation will overwrite any changes done to the cells after the table was originally imported or previously refreshed: Now with this new feature, imported data remains linked to the data source and is available to be updated at all times. It empowers the user to always be able to work with the latest version of the imported MySQL data. We hope you like this this new feature and give it a try! Remember that your feedback is very important for us, so drop us a message with your comments, suggestions for this or other features and follow us at our social media channels: MySQL on Windows (this) Blog: https://blogs.oracle.com/MySqlOnWindows/ MySQL for Excel forum: http://forums.mysql.com/list.php?172 Facebook: http://www.facebook.com/mysql YouTube channel: https://www.youtube.com/user/MySQLChannel Thanks!

  Read the article

• links for 2010-04-22

  - by Bob Rhubart

  Barry N. Perkins: Unique Business Value vs. Unique IT "Some solutions may look good today, solving a budget challenge by reducing cost, or solving a specific tactical challenge, but result in highly complex environments, that may be difficult to manage and maintain and limit the future potential of your business. Put differently, some solutions might push today's challenge into the future, resulting in a more complex and expensive solution." -- Barry N. Perkins, VP Oracle Modernization & Oracle Integrated Solutions (tags: oracle otn enterprisearchitecture modernization) Paul Homchick: The Information Driven Value Chain - Part 2 Paul Homchick continues his series with a look "at the way investments have been made in enterprise software in an effort to create and manage value, and how systems are moving from a controlled-process approach design towards gathering and using dynamically using information." (tags: oracle otn enterprisearchitecture) @vambenepe: The battle of the Cloud Frameworks: Application Servers redux? "The battle of the Cloud Frameworks has started," says William Vambenepe, "and it will look a lot like the battle of the Application Servers which played out over the last decade and a half." (tags: oracle otn cloud frameworks appserver) @ORACLENERD: COLLABORATE: Day 4 Wrap Up Oraclenerd feesses up: "The day started out with the realization that I pulled off the best (COLLABORATE - self annointed) prank ever. Twitter was...all atwitter about the fact that Mark Rittman was Oracle's Person of the Year. Of course it wasn't true. If you look at the picture, you'll realize that he's wearing exactly the same clothes in the magazine cover as he is in real life." (tags: collaborate2010 oracleace) Oracle's Hal Stern at Cloud Expo: "We've Moved from 'What' to 'How'" | Cloud Computing Journal "Hal also spoke a bit about building 'a sustainable IT model.' By this, he said he didn't mean the various Green IT and similar efforts that 'are all about data center efficiency. I think the operational model is just as important. Many enterprises are managing a tremendous amount of complexity, and it's hard to make this sustainable.'" -- Cloud News Desk (tags: oracle cloud cloudexpo halstern) @ORACLENERD: COLLABORATE: The Beach Party "Then tiki statues somehow were incorporated into various dances" -- Oracle ACE Chet "oraclenerd" Justice (tags: 0racle otn oracleace collaborate2010 oaug ioug lasvegas) David Andrews: Collaborate Day Two "Collaborate 2010 has focused on helping attendees understand what is already available and how to make more effective use of it. This does not sound exciting but it is extremely valuable. Most customers use only a small fraction of the capability of the products they already own. Helping them understand all the additional things they could be doing without buying anything more is very valuable." -- David Andrews (tags: oracle oaug collaborate2010 ioug)

  Read the article

• Portal 11g (11.1.1.2) Certified with E-Business Suite

  - by Steven Chan

  Oracle Portal 11g allows you to build, deploy, and manage enterprise portals running on Oracle WebLogic Server.  Oracle Portal 11g includes integration with Oracle WebCenter Services 11g and BPEL, support for open portlet standards JSR 168, WSRP 2.0, and JSR 301.Portal 11g (11.1.1.2) is now certified with Oracle E-Business Suite Release 11i and 12.If you're running a previous version of Portal, there are a number of certified and supported upgrade paths to Portal 11g (11.1.1.2):

  Read the article

• How to set up secure cookie on weblogic server

  - by adejuanc

  WebLogic Server allows a user to securely access HTTPS resources in a session that was initiated using HTTP, without loss of session data. To enable this feature, add AuthCookieEnabled="true" to the WebServer element in config.xml: <WebServer Name="myserver" AuthCookieEnabled="true"/>Setting AuthCookieEnabled to true, which is the default setting, causes the WebLogic Server instance to send a new secure cookie, _WL_AUTHCOOKIE_JSESSIONID, to the browser when authenticating via an HTTPS connection. Once the secure cookie is set, the session is allowed to access other security-constrained HTTPS resources only if the cookie is sent from the browser.Thus, WebLogic Server uses two cookies: the JSESSIONID cookie and the _WL_AUTHCOOKIE_JSESSIONID cookie. By default, the JSESSIONID cookie is never secure, but the _WL_AUTHCOOKIE_JSESSIONID cookie is always secure. A secure cookie is only sent when an encrypted communication channel is in use. Assuming a standard HTTPS login (HTTPS is an encrypted HTTP connection), your browser gets both cookies.For subsequent HTTP access, you are considered authenticated if you have a valid JSESSIONID cookie, but for HTTPS access, you must have both cookies to be considered authenticated. If you only have the JSESSIONID cookie, you must re-authenticate.To configure on Admin Console : Log into WebLogic Admin Console. Under Domain Structure, press click on <domainname> Select the "Web Applications" tab Select "Lock and Edit" in change center. Click on  "Auth Cookie Enabled" checkbox. Restart to confirm changes. Test an application and view the cookie which got stored as "JSESSIONID" To Configure the Web application's weblogic-application.xml file: Run the following to extract the file from the web application's weblogic-application.xml: $PATH_JDK_HOME\binjar -xvf easy-web-examples.ear META-INF/weblogic-application.xml Add <cookie-secure>true</cookie-secure> between <session-descriptor> </session-descriptor> to the weblogic-application.xml. Run the following to repackage the file to the application: $PATH_JDK_HOME\bin\jar -uvf easy-web-examples.ear META-INF/weblogic-application.xml Deploy the application into WebLogic For further information, please read the documentation on "Using Secure Cookies to Prevent Session Stealing " : http://download.oracle.com/docs/cd/E12840_01/wls/docs103/security/thin_client.html#wp1053780

  Read the article

• SOA Management in 3 minutes - Video explainer

  - by J Swaroop

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Today’s CIOs and IT executives face challenges that take valuable time away from more strategic business objectives. They have to keep their systems running 24/7, manage increasingly complex applications, and more as part of their SOA environment. Watch this quick 3 minute video explainer to Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} learn how Oracle EM Management Pack Plus for SOA is engineered to deliver value right out of the box with a fully centralized management console - with a rich set of service and system level dashboards, administrators can view service levels for key business processes and SOA infrastructure components from a central location. Watch the 3 minute video explainer

  Read the article

< Previous Page | 284 285 286 287 288 289 290 291 292 293 294 295  | Next Page >