Search Results

Search found 7417 results on 297 pages for 'customer relationship'.

Page 289/297 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• Contract Work - Lessons Learned

  - by samerpaul

  I thought I would write a post of a different nature today, but still relevant to the tech world. I do a lot of contract jobs myself and really enjoy it. It's nice to keep jumping from project to project, and not having to go to an office or keep regular hours, etc. I really enjoy it. I have learned a lot in the past few years of doing it (both from experience and from help given to me from others, and the internet) so I thought I'd share some of that knowledge/experience today.So here's my own personal "lesson's learned" that hopefully will help you if you find yourself doing contract work:Should I take the job?Ok, so this is the first step. Assuming you were given sufficient information about what they want, then you should really think about what you're capable of doing and whether or not you should take this job. Personally, my rule is, if I know it's possible, I'll say yes, even if I don't yet know how to do it. That's because the internet is such a great help, it would be rare to run into an issue that you can't figure out with some help. So if your clients are asking for something that you don't yet know how to program, but you know you can do it on the platform then go for it. How else are you going to learn?Use this rule with some limitation, however. If you're really lacking the expertise or foundation in something, then unless you have tons of time to complete the project, then I wouldn't say yes. For example, I haven't personally done any 3d/openGL programming yet so I wouldn't say yes to a project that extensively uses it. OK, so I want the job, but how much do I charge?This part can be tricky. There is no set formula really, but I have some tips for pricing that will hopefully give you a better idea on how to confidently ask your price and have them accept. Here are some personal guidelinesHow much time do you have to complete the project? If it's shorter than average, then charge more. You can even make a subtle note about this (or not so subtle if they still don't get it.) If it seems too short of a time (i.e. near impossible to complete), be sure to say that. It looks bad to promise a time that you can't keep--and it makes it less likely for them to return to you for work.Your Hourly rate: How long have you been working in that language? Do you have existing projects to back you up? Or previous contacts that can vouch for your work? Are there very few people with your particular skill set? All of these things will lend themselves to setting an hourly rate. I'd also try out a quick google search of what your line of work is, to see what the industry standard is at that point in time.I wouldn't price too low, because you want to make your time worth it. You also want them to feel like they're paying for quality work (assuming you can deliver it :) ). Finally, think about your client. If it's a small business, then don't price it too high if you want the job. If it's an enterprise (like a Fortune company), then don't be afraid to price higher. They have the budget for it.Fixed price: If they want a fixed price project, then you need to think about how many hours it will take you to complete it and multiply it by the hourly rate you set for yourself. Then, honestly, I would add 10-20% on top of that. Why? Because nothing ever works exactly how you want it to. There are lots of times that something "trivial" is way harder than it should be, or something that "should work" doesn't for hours and it eats away at your hourly rate. I can't count the number of times I encountered a logical bug that took away an entire's day work because debuggers don't help in those cases. By adding that padding in, it's still OK to have those days where you don't get as much done as you want. And another useful tip: Depending on your client, and the scope, you most likely want to set that you both sign off on a specification sheet before doing any work, and that any changes will result in a re-evaulation of the price. This is to help protect you from being handed a huge new addition to the project half-way in, without any extra payment.Scope of project: Finally, is it a huge project? Is it really small/fast? This affects how much your client will be willing to pay. If it sounds big, they will be willing to pay more for it. If it seems really small, then you won't be able to get away with a large asking price (as easily).Ok, I priced it, now what?So now that you have the price, you want to make sure it feels justified to your client. I never set a price before I can really think about everything. For example, if you're still in your introduction phase, and they want a price, don't give one! Just comment that you will send them a proposal sheet with all the features outlined, and a price for everything. You don't want to shout out a low number and then deliver something that is way higher. You also don't want to shock them with a big number before they feel like they are getting a great product.Make up a proposal document in a word editor. Personally, I leave the price till the very end. Why? Because by the time they reach the end, you've already discussed all the great features you plan to implement, and how it's the best product they'll ever use, etc etc...so your price comes off as a steal! If you hit them up front with a price, they will read through the document with a negative bias. Think about those commercials on TV. They always go on about their product, then at the end, ask "What would you pay for something like this? $100? $50? How about $20!!". This is not by accident.Scenario: I finished the job way earlier than expectedYou have two options then. You can either polish the hell out of the application, and even throw in a few bonus features (assuming they are in-line with the customer's needs) or you can sit and wait on it until you near your deadline. Why don't you want to turn it in too early? Because you should treat that extra time as a surplus. If you said it is going to take you 3 weeks, and it took you only 1, you have a surplus of 2 weeks. I personally don't want to let them know that I can do a 3 week project in 1 week. Why not? Because that may not always be the case! I may later have a 3 week project that takes all 3 weeks, but if I set a precedent of delivering super early, then the pressure is on for that longer project. It also makes it harder to quote longer times if you keep delivering too early.Feel free to deliver early, but again, don't do it too early. They may also wonder why they paid you for 3 weeks of work if you're done in 1. They may further wonder if the product sucks, or what is wrong with it, if it's done so early, etc.I would just polish the application. Everyone loves polish in their applications. The smallest details are what make an application go from "functional" to "fantastic". And since you are still delivering on time, then they are still going to be very happy with you.Scenario: It's taking way too long to finish this, and the deadline is nearing/here!So this is not a fun scenario to be in, but it'll happen. Sometimes the scope of the project gets out of hand. The best policy here is OPENNESS/HONESTY. Tell them that the project is taking longer than expected, and give a reasonable time for when you think you'll have it done. I typically explain it in a way that makes it sound like it isn't something that I did wrong, but it's just something about the nature of the project. This really goes for any scenario, to be honest. Just continue to stay open and communicative about your progress. This doesn't mean that you should email them every five minutes (unless they want you to), but it does mean that maybe every few days or once a week, give them an update on where you're at, and what's next. They'll be happy to know they are paying for progress, and it'll make it easier to ask for an extension when something goes wrong, because they know that you've been working on it all along.Final tips and thoughts:In general, contract work is really fun and rewarding. It's nice to learn new things all the time, as mandated by the project ,and to challenge yourself to do things you may not have done before. The key is to build a great relationship with your clients for future work, and for recommendations. I am always very honest with them and I never promise something I can't deliver. Again, under promise, over deliver!I hope this has proved helpful!Cheers,samerpaul

  Read the article

• DBA Best Practices - A Blog Series: Episode 1 - Backups

  - by Argenis

    This blog post is part of the DBA Best Practices series, on which various topics of concern for daily database operations are discussed. Your feedback and comments are very much welcome, so please drop by the comments section and be sure to leave your thoughts on the subject. Morning Coffee When I was a DBA, the first thing I did when I sat down at my desk at work was checking that all backups have completed successfully. It really was more of a ritual, since I had a dual system in place to check for backup completion: 1) the scheduled agent jobs to back up the databases were set to alert the NOC in failure, and 2) I had a script run from a central server every so often to check for any backup failures. Why the redundancy, you might ask. Well, for one I was once bitten by the fact that database mail doesn't work 100% of the time. Potential causes for failure include issues on the SMTP box that relays your server email, firewall problems, DNS issues, etc. And so to be sure that my backups completed fine, I needed to rely on a mechanism other than having the servers do the taking - I needed to interrogate the servers and ask each one if an issue had occurred. This is why I had a script run every so often. Some of you might have monitoring tools in place like Microsoft System Center Operations Manager (SCOM) or similar 3rd party products that would track all these things for you. But at that moment, we had no resort but to write our own Powershell scripts to do it. Now it goes without saying that if you don't have backups in place, you might as well find another career. Your most sacred job as a DBA is to protect the data from a disaster, and only properly safeguarded backups can offer you peace of mind here. "But, we have a cluster...we don't need backups" Sadly I've heard this line more than I would have liked to. You need to understand that a cluster is comprised of shared storage, and that is precisely your single point of failure. A cluster will protect you from an issue at the Operating System level, and also under an outage of any SQL-related service or dependent devices. But it will most definitely NOT protect you against corruption, nor will it protect you against somebody deleting data from a table - accidentally or otherwise. Backup, fine. How often do I take a backup? The answer to this is something you will hear frequently when working with databases: it depends. What does it depend on? For one, you need to understand how much data your business is willing to lose. This is what's called Recovery Point Objective, or RPO. If you don't know how much data your business is willing to lose, you need to have an honest and realistic conversation about data loss expectations with your customers, internal or external. From my experience, their first answer to the question "how much data loss can you withstand?" will be "zero". In that case, you will need to explain how zero data loss is very difficult and very costly to achieve, even in today's computing environments. Do you want to go ahead and take full backups of all your databases every hour, or even every day? Probably not, because of the impact that taking a full backup can have on a system. That's what differential and transaction log backups are for. Have I answered the question of how often to take a backup? No, and I did that on purpose. You need to think about how much time you have to recover from any event that requires you to restore your databases. This is what's called Recovery Time Objective. Again, if you go ask your customer how long of an outage they can withstand, at first you will get a completely unrealistic number - and that will be your starting point for discussing a solution that is cost effective. The point that I'm trying to get across is that you need to have a plan. This plan needs to be practiced, and tested. Like a football playbook, you need to rehearse the moves you'll perform when the time comes. How often is up to you, and the objective is that you feel better about yourself and the steps you need to follow when emergency strikes. A backup is nothing more than an untested restore Backups are files. Files are prone to corruption. Put those two together and realize how you feel about those backups sitting on that network drive. When was the last time you restored any of those? Restoring your backups on another box - that, by the way, doesn't have to match the specs of your production server - will give you two things: 1) peace of mind, because now you know that your backups are good and 2) a place to offload your consistency checks with DBCC CHECKDB or any of the other DBCC commands like CHECKTABLE or CHECKCATALOG. This is a great strategy for VLDBs that cannot withstand the additional load created by the consistency checks. If you choose to offload your consistency checks to another server though, be sure to run DBCC CHECKDB WITH PHYSICALONLY on the production server, and if you're using SQL Server 2008 R2 SP1 CU4 and above, be sure to enable traceflags 2562 and/or 2549, which will speed up the PHYSICALONLY checks further - you can read more about this enhancement here. Back to the "How Often" question for a second. If you have the disk, and the network latency, and the system resources to do so, why not backup the transaction log often? As in, every 5 minutes, or even less than that? There's not much downside to doing it, as you will have to clear the log with a backup sooner than later, lest you risk running out space on your tlog, or even your drive. The one drawback to this approach is that you will have more files to deal with at restore time, and processing each file will add a bit of extra time to the entire process. But it might be worth that time knowing that you minimized the amount of data lost. Again, test your plan to make sure that it matches your particular needs. Where to back up to? Network share? Locally? SAN volume? This is another topic where everybody has a favorite choice. So, I'll stick to mentioning what I like to do and what I consider to be the best practice in this regard. I like to backup to a SAN volume, i.e., a drive that actually lives in the SAN, and can be easily attached to another server in a pinch, saving you valuable time - you wouldn't need to restore files on the network (slow) or pull out drives out a dead server (been there, done that, it’s also slow!). The key is to have a copy of those backup files made quickly, and, if at all possible, to a remote target on a different datacenter - or even the cloud. There are plenty of solutions out there that can help you put such a solution together. That right there is the first step towards a practical Disaster Recovery plan. But there's much more to DR, and that's material for a different blog post in this series.

  Read the article

• First PC Build (Part 1)

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

  Read the article

• Alcatel-Lucent: Enterprise 2.0: The Top 5 Things I would Do Over

  - by Kellsey Ruppel

  Happy Monday! Does anyone else feel as if the weekend went entirely too quickly? At least for those of us in the United States, we have the 4th of July Holiday next week to look forward to This week on the blog, we are going to focus on "WebCenter by Example" and highlight best practices from customers and partners. I recently came across this article and I think this is a great example of how we can learn from one another when it comes to social collaboration adoption. Do you agree with Jem? What things or best practices have you learned in your organizations?  By Jem Janik, Enterprise community manager, Alcatel-Lucent  Not so long ago, Engage, the Alcatel-Lucent employee social network and collaboration platform, celebrated its third birthday. With more than 25,000 members actively interacting each month, Engage has been a big enough success that it’s been the subject of external articles, and often those of us who helped launch it will go out and speak about what aspects contributed to that success. Hindsight is still 20/20 and what it takes to successfully launch an enterprise 2.0 community is fairly well-known now.  Today I want to tell you what I suspect you really want to know about.  As the enterprise community manager for Engage, after three years in, what are the top 5 things I wish we (and I mostly mean me) could do over? #5 Define your analytics solution from the start There is so much to do when you launch a community and initially growing it without complete chaos is quite a task.  It doesn’t take too long to get to a point where you want to focus your continued efforts in growing company collaboration.  Do people truly talk across regional boundaries or have we shifted siloed conversations to a new platform.  Is there one organization that doesn’t interact with another? If you are lucky you’ll have someone in your community team well versed in the world of databases and SQL queries, but it takes time to figure out what backend analytics data actually means. Professional support can be expensive and it may be hard to justify later as it typically has the community manager as the only main customer.  Figure out what you think you’ll want to know and how to get it early on. The sooner the better even if it doesn’t seem that critical at the time. #4 Lobbies guide you to the right places One piece of feedback that comes up more and more as we keep growing Engage is it’s hard to find stuff, or new people are not sure where to start. Something we’re doing now is defining some general topic areas of interest to be like “lobbies” into the platform and some common hashtags to go with them. I liken this to walking into a large medical or professional building for the first time.  There are hundreds of offices, and you look to a sign in the lobby to get guided to the right place for you.  We’re building that sign for members now, but again we missed the boat as the majority of the company has had their initial Engage experience. #3 Clean up, clean up, clean up Knowledge work and folksonomies are messy! The day we opened the doors to Engage I would have said we should keep everything ever created in Engage with an argument that it was a window into our collective knowledge so nothing should go.  Well, 6000+ groups and 200,000+ pieces of content later, I’ve changed my mind.  As previously mentioned, with too much “stuff” the system can be overwhelming to new members and it makes it harder to get what you’re looking for.   Do we need that help document about a tool we no longer have? NO!  Do we need that group that had 1 document and 2 discussions in the last two years? NO! Should we only have one group about a given topic instead of 4?  YES! Last fall, Engage defined a cleanup process for groups not used for a long time.  We also formed a volunteer cleaning army who are extra eyes on the hunt for “stuff” that should be updated, merged, or deleted.  It’s better late than never, but in line with what’s becoming a theme I wish these efforts had started earlier. #2 Communications & local community management One of the most important aspects of my job is to make sure people who should be talking to each other are actually doing it.  Connecting people to the other people they should know, the groups they should join, a piece of content that shouldn’t be missed.   I have worked both inside and outside of communications teams, and they are the best informed people in your company.  They know when something big is coming, how it impacts employees, how it fits with strategy, who else knows more, etc.  Having communications professionals who are power users can help scale up community management because they are already so well connected.  They also need to have the platform skills to pay attention without suffering email overload, how to grab someone’s attention, etc.  I wish I’d had figured this out much earlier.  If I had I would have groomed more communications colleagues into advocates and power members right at the start. #1 Grooming advocates vs. natural advocates I’ve just alluded to this above already. The very best advocates are those who naturally embrace your platform and automatically start to see new ways to work within it.  Those advocates seem to come out of the woodwork naturally since some of them are early adopters.  Not surprisingly, our best advocates today are those same people who were willing to come kick the tires when the community was completely empty.  Unfortunately, we didn’t get a global spread of those natural advocates.  I did ask around when we first launched for other people who might be good candidates, but didn’t push too hard as there were so many other things to get ready.  That was a mistake.  If I could get a redo I would have formally asked for people to be assigned where there were gaps and groomed them into an advocate.  Today as we find new advocates to fill the gaps, people are hesitant as the initial set has three years of practice are ahead of the curve power members; it definitely would have been easier earlier on. As fairly early adopters to corporate scale enterprise collaboration, there hasn’t been a roadmap to follow as we’ve grown Engage, which is part of the fun! It’s clear a lot of issues are more easily tackled the earlier you identify and begin to correct them, and I’ve identified the main five I wish I could redo.  In the spirit of collaboration, I hope someone else learns from my mistakes! View the original article by Jem here. 

  Read the article

• Metrics - A little knowledge can be a dangerous thing (or 'Why you're not clever enough to interpret metrics data')

  - by Jason Crease

  At RedGate Software, I work on a .NET obfuscator  called SmartAssembly.  Various features of it use a database to store various things (exception reports, name-mappings, etc.) The user is given the option of using either a SQL-Server database (which requires them to have Microsoft SQL Server), or a Microsoft Access MDB file (which requires nothing). MDB is the default option, but power-users soon switch to using a SQL Server database because it offers better performance and data-sharing. In the fashionable spirit of optimization and metrics, an obvious product-management question is 'Which is the most popular? SQL Server or MDB?' We've collected data about this fact, using our 'Feature-Usage-Reporting' technology (available as part of SmartAssembly) and more recently our 'Application Metrics' technology: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 28 19.0 8115 8115 MDB 114 77.6 1449 1449 (As a disclaimer, please note than SmartAssembly has far more than 132 users . This data is just a selection of one build) So, it would appear that SQL-Server is used by fewer users, but more often. Great. But here's why these numbers are useless to me: Only the original developers understand the data What does a single 'usage' of 'MDB' mean? Does this happen once per run? Once per option change? On clicking the 'Obfuscate Now' button? When running the command-line version or just from the UI version? Each question could skew the data 10-fold either way, and the answers only known by the developer that instrumented the application in the first place. In other words, only the original developer can interpret the data - product-managers cannot interpret the data unaided. Most of the data is from uninterested users About half of people who download and run a free-trial from the internet quit it almost immediately. Only a small fraction use it sufficiently to make informed choices. Since the MDB option is the default one, we don't know how many of those 114 were people CHOOSING to use the MDB, or how many were JUST HAPPENING to use this MDB default for their 20-second trial. This is a problem we see across all our metrics: Are people are using X because it's the default or are they using X because they want to use X? We need to segment the data further - asking what percentage of each percentage meet our criteria for an 'established user' or 'informed user'. You end up spending hours writing sophisticated and dubious SQL queries to segment the data further. Not fun. You can't find out why they used this feature Metrics can answer the when and what, but not the why. Why did people use feature X? If you're anything like me, you often click on random buttons in unfamiliar applications just to explore the feature-set. If we listened uncritically to metrics at RedGate, we would eliminate the most-important and more-complex features which people actually buy the software for, leaving just big buttons on the main page and the About-Box. "Ah, that's interesting!" rather than "Ah, that's actionable!" People do love data. Did you know you eat 1201 chickens in a lifetime? But just 4 cows? Interesting, but useless. Often metrics give you a nice number: '5.8% of users have 3 or more monitors' . But unless the statistic is both SUPRISING and ACTIONABLE, it's useless. Most metrics are collected, reviewed with lots of cooing. and then forgotten. Unless a piece-of-data could change things, it's useless collecting it. People get obsessed with significance levels The first things that lots of people do with this data is do a t-test to get a significance level ("Hey! We know with 99.64% confidence that people prefer SQL Server to MDBs!") Believe me: other causes of error/misinterpretation in your data are FAR more significant than your t-test could ever comprehend. Confirmation bias prevents objectivity If the data appears to match our instinct, we feel satisfied and move on. If it doesn't, we suspect the data and dig deeper, plummeting down a rabbit-hole of segmentation and filtering until we give-up and move-on. Data is only useful if it can change our preconceptions. Do you trust this dodgy data more than your own understanding, knowledge and intelligence?  I don't. There's always multiple plausible ways to interpret/action any data Let's say we segment the above data, and get this data: Post-trial users (i.e. those using a paid version after the 14-day free-trial is over): Parameter Number of users % of total users Number of sessions Number of usages SQL Server 13 9.0 1115 1115 MDB 5 4.2 449 449 Trial users: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 15 10.0 7000 7000 MDB 114 77.6 1000 1000 How do you interpret this data? It's one of: Mostly SQL Server users buy our software. People who can't afford SQL Server tend to be unable to afford or unwilling to buy our software. Therefore, ditch MDB-support. Our MDB support is so poor and buggy that our massive MDB user-base doesn't buy it.  Therefore, spend loads of money improving it, and think about ditching SQL-Server support. People 'graduate' naturally from MDB to SQL Server as they use the software more. Things are fine the way they are. We're marketing the tool wrong. The large number of MDB users represent uninformed downloaders. Tell marketing to aggressively target SQL Server users. To choose an interpretation you need to segment again. And again. And again, and again. Opting-out is correlated with feature-usage Metrics tends to be opt-in. This skews the data even further. Between 5% and 30% of people choose to opt-in to metrics (often called 'customer improvement program' or something like that). Casual trial-users who are uninterested in your product or company are less likely to opt-in. This group is probably also likely to be MDB users. How much does this skew your data by? Who knows? It's not all doom and gloom. There are some things metrics can answer well. Environment facts. How many people have 3 monitors? Have Windows 7? Have .NET 4 installed? Have Japanese Windows? Minor optimizations.  Is the text-box big enough for average user-input? Performance data. How long does our app take to start? How many databases does the average user have on their server? As you can see, questions about who-the-user-is rather than what-the-user-does are easier to answer and action. Conclusion Use SmartAssembly. If not for the metrics (called 'Feature-Usage-Reporting'), then at least for the obfuscation/error-reporting. Data raises more questions than it answers. Questions about environment are the easiest to answer.

  Read the article

• BI Applications overview

  - by sv744

  Welcome to Oracle BI applications blog! This blog will talk about various features, general roadmap, description of functionality and implementation steps related to Oracle BI applications. In the first post we start with an overview of the BI apps and will delve deeper into some of the topics below in the upcoming weeks and months. If there are other topics you would like us to talk about, pl feel free to provide feedback on that. The Oracle BI applications are a set of pre-built applications that enable pervasive BI by providing role-based insight for each functional area, including sales, service, marketing, contact center, finance, supplier/supply chain, HR/workforce, and executive management. For example, Sales Analytics includes role-based applications for sales executives, sales management, as well as front-line sales reps, each of whom have different needs. The applications integrate and transform data from a range of enterprise sources—including Siebel, Oracle, PeopleSoft, SAP, and others—into actionable intelligence for each business function and user role. This blog  starts with the key benefits and characteristics of Oracle BI applications. In a series of subsequent blogs, each of these points will be explained in detail. Why BI apps? Demonstrate the value of BI to a business user, show reports / dashboards / model that can answer their business questions as part of the sales cycle. Demonstrate technical feasibility of BI project and significantly lower risk and improve success Build Vs Buy benefit Don’t have to start with a blank sheet of paper. Help consolidate disparate systems Data integration in M&A situations Insulate BI consumers from changes in the OLTP Present OLTP data and highlight issues of poor data / missing data – and improve data quality and accuracy Prebuilt Integrations BI apps support prebuilt integrations against leading ERP sources: Fusion Applications, E- Business Suite, Peoplesoft, JD Edwards, Siebel, SAP Co-developed with inputs from functional experts in BI and Applications teams. Out of the box dimensional model to source model mappings Multi source and Multi Instance support Rich Data Model    BI apps have a very rich dimensionsal data model built over 10 years that incorporates best practises from BI modeling perspective as well as reflect the source system complexities  Thanks for reading a long post, and be on the lookout for future posts.  We will look forward to your valuable feedback on these topics as well as suggestions on what other topics would you like us to cover. I Conformed dimensional model across all business subject areas allows cross functional reporting, e.g. customer / supplier 360 Over 360 fact tables across 7 product areas CRM – 145, SCM – 47, Financials – 28, Procurement – 20, HCM – 27, Projects – 18, Campus Solutions – 21, PLM - 56 Supported by 300 physical dimensions Support for extensive calendars; Gregorian, enterprise and ledger based Conformed data model and metrics for real time vs warehouse based reporting  Multi-tenant enabled Extensive BI related transformations BI apps ETL and data integration support various transformations required for dimensional models and reporting requirements. All these have been distilled into common patterns and abstracted logic which can be readily reused across different modules Slowly Changing Dimension support Hierarchy flattening support Row / Column Hybrid Hierarchy Flattening As Is vs. As Was hierarchy support Currency Conversion :-  Support for 3 corporate, CRM, ledger and transaction currencies UOM conversion Internationalization / Localization Dynamic Data translations Code standardization (Domains) Historical Snapshots Cycle and process lifecycle computations Balance Facts Equalization of GL accounting chartfields/segments Standardized values for categorizing GL accounts Reconciliation between GL and subledgers to track accounted/transferred/posted transactions to GL Materialization of data only available through costly and complex APIs e.g. Fusion Payroll, EBS / Fusion Accruals Complex event Interpretation of source data – E.g. o    What constitutes a transfer o    Deriving supervisors via position hierarchy o    Deriving primary assignment in PSFT o    Categorizing and transposition to measures of Payroll Balances to specific metrics to support side by side comparison of measures of for example Fixed Salary, Variable Salary, Tax, Bonus, Overtime Payments. o    Counting of Events – E.g. converting events to fact counters so that for example the number of hires can easily be added up and compared alongside the total transfers and terminations. Multi pass processing of multiple sources e.g. headcount, salary, promotion, performance to allow side to side comparison. Adding value to data to aid analysis through banding, additional domain classifications and groupings to allow higher level analytical reporting and data discovery Calculation of complex measures examples: o    COGs, DSO, DPO, Inventory turns  etc o    Transfers within a Hierarchy or out of / into a hierarchy relative to view point in hierarchy. Configurability and Extensibility support  BI apps offer support for extensibility for various entities as automated extensibility or part of extension methodology Key Flex fields and Descriptive Flex support  Extensible attribute support (JDE)  Conformed Domains ETL Architecture BI apps offer a modular adapter architecture which allows support of multiple product lines into a single conformed model Multi Source Multi Technology Orchestration – creates load plan taking into account task dependencies and customers deployment to generate a plan based on a customers of multiple complex etl tasks Plan optimization allowing parallel ETL tasks Oracle: Bit map indexes and partition management High availability support    Follow the sun support. TCO BI apps support several utilities / capabilities that help with overall total cost of ownership and ensure a rapid implementation Improved cost of ownership – lower cost to deploy On-going support for new versions of the source application Task based setups flows Data Lineage Functional setup performed in Web UI by Functional person Configuration Test to Production support Security BI apps support both data and object security enabling implementations to quickly configure the application as per the reporting security needs Fine grain object security at report / dashboard and presentation catalog level Data Security integration with source systems  Extensible to support external data security rules Extensive Set of KPIs Over 7000 base and derived metrics across all modules Time series calculations (YoY, % growth etc) Common Currency and UOM reporting Cross subject area KPIs (analyzing HR vs GL data, drill from GL to AP/AR, etc) Prebuilt reports and dashboards 3000+ prebuilt reports supporting a large number of industries Hundreds of role based dashboards Dynamic currency conversion at dashboard level Highly tuned Performance The BI apps have been tuned over the years for both a very performant ETL and dashboard performance. The applications use best practises and advanced database features to enable the best possible performance. Optimized data model for BI and analytic queries Prebuilt aggregates& the ability for customers to create their own aggregates easily on warehouse facts allows for scalable end user performance Incremental extracts and loads Incremental Aggregate build Automatic table index and statistics management Parallel ETL loads Source system deletes handling Low latency extract with Golden Gate Micro ETL support Bitmap Indexes Partitioning support Modularized deployment, start small and add other subject areas seamlessly Source Specfic Staging and Real Time Schema Support for source specific operational reporting schema for EBS, PSFT, Siebel and JDE Application Integrations The BI apps also allow for integration with source systems as well as other applications that provide value add through BI and enable BI consumption during operational decision making Embedded dashboards for Fusion, EBS and Siebel applications Action Link support Marketing Segmentation Sales Predictor Dashboard Territory Management External Integrations The BI apps data integration choices include support for loading extenral data External data enrichment choices : UNSPSC, Item class etc. Extensible Spend Classification Broad Deployment Choices Exalytics support Databases :  Oracle, Exadata, Teradata, DB2, MSSQL ETL tool of choice : ODI (coming), Informatica Extensible and Customizable Extensible architecture and Methodology to add custom and external content Upgradable across releases

  Read the article

• How to Control Screen Layouts in LightSwitch

  - by ChrisD

  Visual Studio LightSwitch has a bunch of screen templates that you can use to quickly generate screens. They give you good starting points that you can customize further. When you add a new screen to your project you see a set of screen templates that you can choose from. These templates lay out all the related data you choose to put on a screen automatically for you. And don’t under estimate them; they do a great job of laying out controls in a smart way. For instance, a tab control will be used when you select more than one related set of data to display on a screen. However, you’re not limited to taking the layout as is. In fact, the screen designer is pretty flexible and allows you to create stacks of controls in a variety of configurations. You just need to visualize your screen as a series of containers that you can lay out in rows and columns. You then place controls or stacks of controls into these areas to align the screen exactly how you want. If you’re new in Visual Studio LightSwitch, you can see this tutorial. OK, Let’s start with a simple example. I have already designed my data entities for a simple order tracking system similar to the Northwind database. I also have added a Search Data  Screen to search my Products already. Now I will add a new Details Screen for my Products and make it the default screen via the “Add New Screen” dialog: The screen designer picks a simple layout for me based on the single entity I chose, in this case Product. Hit F5 to run the application, select a Product on the search screen to open the Product Details Screen. Notice that it’s pretty simple because my entity is simple. Click the “Customize” button in the top right of the screen so we can start tweaking it. The left side of the screen shows the containership of controls and data bindings (called the content tree) and the right side shows the live preview with data. Notice that we have a simple layout of two rows but only one row is populated (with a vertical stack of controls in this case). The bottom row is empty. You can envision the screen like this: Each container will display a group of data that you select. For instance in the above screen, the top row is set to a vertical stack control and the group of data to display is coming from Product. So when laying out screens you need to think in terms of containers of controls bound to groups of data. To change the data to which a container is bound, select the data item next to the container: You can select the “New Group” item in order to create more containers (or controls) within the current container. For instance to totally control the layout, select the Product in the top row and hit the delete key. This will delete the vertical stack and therefore all the controls on the screen. The content tree will still have two rows, but the rows are now both empty. If you want a layout of four containers (two rows and two columns) then select “New Group” for the data item and then change the vertical stack control to “Two Columns” for both of the rows as shown here: You can keep going on and on by selecting new groups and choosing between rows or columns. Here’s a layout with 8 containers, 4 rows and 2 columns: And here is a layout with 7 content areas; one row across the top of the screen and three rows with two columns below that: When you select Choose Content and select a data item like Product it will populate all the controls within the container (row or column in a vertical stack) however you have complete control on what to display within each group. You can delete fields you don’t want to display and/or change their controls. You can also change the size of controls and how they display by changing the settings in the properties window. If you are in the Screen Designer (and not the customization mode like we are here) you can also drag-drop data items from the left-hand side of the screen to the content tree. Note, however, that not all areas of the tree will allow you to drop a data item if there is a binding already set to a different set of data. For instance you can’t drop a Customer ID into the same group as a Product if they originate from different entities. To get around this, all you need to do is create a new group and content area as shown above. Let’s take a more complex example that deals with more than just product. I want to design a complex screen that displays Products and their Category, as well as all the OrderDetails for which that product is selected. This time I will create a new screen and select List and Details, select the Products screen data, and include the related OrderDetails. However I’m going to totally change the layout so that a Product grid is at the top left and below that is the selected Product detail. Below that will be the Category text fields and image in two columns below. On the right side I want the OrderDetails grid to take up the whole right side of the screen. All this can be done in customization mode while you’re debugging the application. To do this, I first deleted all the content items in the tree and then re-created the content tree as shown in the image below. I also set the image to be larger and the description textbox to be 5 rows using the property window below the live preview. I added the green lines to indicate the containers and show how it maps to the content tree (click to enlarge): I hope this demystifies the screen designer a little bit. Remember that screen templates are excellent starting points – you can take them as-is or customize them further. It takes a little fooling around with customizing screens to get them to do exactly what you want but there are a ton of possibilities once you get the hang of it. Stay tuned for more information on how to create your own screen templates that show up in the “Add New Screen” dialog. Enjoy! The tutorial that might be interested: Adding Custom Control In LightSwitch

  Read the article

• ANTS CLR and Memory Profiler In Depth Review (Part 2 of 2 &ndash; Memory Profiler)

  - by ToStringTheory

  One of the things that people might not know about me, is my obsession to make my code as efficient as possible. Many people might not realize how much of a task or undertaking that this might be, but it is surely a task as monumental as climbing Mount Everest, except this time it is a challenge for the mind… In trying to make code efficient, there are many different factors that play a part – size of project or solution, tiers, language used, experience and training of the programmer, technologies used, maintainability of the code – the list can go on for quite some time. I spend quite a bit of time when developing trying to determine what is the best way to implement a feature to accomplish the efficiency that I look to achieve. One program that I have recently come to learn about – Red Gate ANTS Performance (CLR) and Memory profiler gives me tools to accomplish that job more efficiently as well. In this review, I am going to cover some of the features of the ANTS memory profiler set by compiling some hideous example code to test against. Notice As a member of the Geeks With Blogs Influencers program, one of the perks is the ability to review products, in exchange for a free license to the program. I have not let this affect my opinions of the product in any way, and Red Gate nor Geeks With Blogs has tried to influence my opinion regarding this product in any way. Introduction – Part 2 In my last post, I reviewed the feature packed Red Gate ANTS Performance Profiler.  Separate from the Red Gate Performance Profiler is the Red Gate ANTS Memory Profiler – a simple, easy to use utility for checking how your application is handling memory management…  A tool that I wish I had had many times in the past.  This post will be focusing on the ANTS Memory Profiler and its tool set. The memory profiler has a large assortment of features just like the Performance Profiler, with the new session looking nearly exactly alike: ANTS Memory Profiler Memory profiling is not something that I have to do very often…  In the past, the few cases I’ve had to find a memory leak in an application I have usually just had to trace the code of the operations being performed to look for oddities…  Sadly, I have come across more undisposed/non-using’ed IDisposable objects, usually from ADO.Net than I would like to ever see.  Support is not fun, however using ANTS Memory Profiler makes this task easier.  For this round of testing, I am going to use the same code from my previous example, using the WPF application. This time, I will choose the ‘Profile Memory’ option from the ANTS menu in Visual Studio, which launches the solution in its currently configured state/start-up project, and then launches the ANTS Memory Profiler to help.  It prepopulates all of the fields with the current project information, and all I have to do is select the ‘Start Profiling’ option. When the window comes up, it is actually quite barren, just giving ideas on how to work the profiler.  You start by getting to the point in your application that you want to profile, and then taking a ‘Memory Snapshot’.  This performs a full garbage collection, and snapshots the managed heap.  Using the same WPF app as before, I will go ahead and take a snapshot now. As you can see, ANTS is already giving me lots of information regarding the snapshot, however this is just a snapshot.  The whole point of the profiler is to perform an action, usually one where a memory problem is being noticed, and then take another snapshot and perform a diff between them to see what has changed.  I am going to go ahead and generate 5000 primes, and then take another snapshot: As you can see, ANTS is already giving me a lot of new information about this snapshot compared to the last.  Information such as difference in memory usage, fragmentation, class usage, etc…  If you take more snapshots, you can use the dropdown at the top to set your actual comparison snapshots. If you beneath the timeline, you will see a breadcrumb trail showing how best to approach profiling memory using ANTS.  When you first do the comparison, you start on the Summary screen.  You can either use the charts at the bottom, or switch to the class list screen to get to the next step.  Here is the class list screen: As you can see, it lists information about all of the instances between the snapshots, as well as at the bottom giving you a way to filter by telling ANTS what your problem is.  I am going to go ahead and select the Int16[] to look at the Instance Categorizer Using the instance categorizer, you can travel backwards to see where all of the instances are coming from.  It may be hard to see in this image, but hopefully the lightbox (click on it) will help: I can see that all of these instances are rooted to the application through the UI TextBlock control.  This image will probably be even harder to see, however using the ‘Instance Retention Graph’, you can trace an objects memory inheritance up the chain to see its roots as well.  This is a simple example, as this is simply a known element.  Usually you would be profiling an actual problem, and comparing those differences.  I know in the past, I have spotted a problem where a new context was created per page load, and it was rooted into the application through an event.  As the application began to grow, performance and reliability problems started to emerge.  A tool like this would have been a great way to identify the problem quickly. Overview Overall, I think that the Red Gate ANTS Memory Profiler is a great utility for debugging those pesky leaks.  3 Biggest Pros: Easy to use interface with lots of options for configuring profiling session Intuitive and helpful interface for drilling down from summary, to instance, to root graphs ANTS provides an API for controlling the profiler. Not many options, but still helpful. 2 Biggest Cons: Inability to automatically snapshot the memory by interval Lack of complete integration with Visual Studio via an extension panel Ratings Ease of Use (9/10) – I really do believe that they have brought simplicity to the once difficult task of memory profiling.  I especially liked how it stepped you further into the drilldown by directing you towards the best options. Effectiveness (10/10) – I believe that the profiler does EXACTLY what it purports to do.  Features (7/10) – A really great set of features all around in the application, however, I would like to see some ability for automatically triggering snapshots based on intervals or framework level items such as events. Customer Service (10/10) – My entire experience with Red Gate personnel has been nothing but good.  their people are friendly, helpful, and happy! UI / UX (9/10) – The interface is very easy to get around, and all of the options are easy to find.  With a little bit of poking around, you’ll be optimizing Hello World in no time flat! Overall (9/10) – Overall, I am happy with the Memory Profiler and its features, as well as with the service I received when working with the Red Gate personnel.  Thank you for reading up to here, or skipping ahead – I told you it would be shorter!  Please, if you do try the product, drop me a message and let me know what you think!  I would love to hear any opinions you may have on the product. Code Feel free to download the code I used above – download via DropBox

  Read the article

• Getting Started With Tailoring Business Processes

  - by Richard Bingham

  In this article, and for the sake of simplicity, we will use the term “On-Premise” to mean a deployment where you have design-time development access to the instance, including administration of the technology components, the applications filesystem, and the database. In reality this might be a local development instance that is then supported by a team who can deploy your customizations to the restricted production instance equivalents. Tools Overview Firstly let’s look at the Design-Time tools within JDeveloper for customizing and extending the artifacts of a Business Process. In essence this falls into two buckets; SOA Composite Editor for working with BPEL processes, and the BPM Studio. The SOA Composite Editor As a standard extension to JDeveloper, this graphical design tool should be familiar to anyone previously worked with Oracle SOA Server. With easy-to-use modeling capability, backed-up by full XML source-view (for read-only), it provides everything that is needed to implement the technical design. In simple terms, once deployed to the remote SOA Server the composite components (like Mediator) leverage the Event Delivery Network (EDN) for interaction with the application logic. If you are customizing an existing Fusion Applications BPEL process then be aware that it does support MDS-based customization layers just like Page Composer where different customizations are used based on the run-time context, like for a specific Product or Business Unit. This also makes them safe from patching and upgrades, although only a single active version of the composite is available at run-time. This is defined by a field on the composite record, available in Enterprise Manager. Obviously if you wish to fire different activities and tasks based on the user context then you can should include switches to fork the flows in your custom BPEL process. Figure 1 – A BPEL process in Composite Editor The following describes the simplified steps for making customizations to BPEL processes. This is the most common method of changing the business processes of Fusion Applications, as over 400 BPEL-based composite applications are provided out-of-the-box. Setup your local Fusion Applications JDeveloper environment. The SOA Composite Editor should be installed as part of the Fusion Applications extension. If there are problems you can also find it under the ‘Check for Updates’ help menu option. Since SOA Server is not part of the JDeveloper integrated WebLogic Server, setup a standalone WebLogic environment for deploying and testing. Obviously you might use a Fusion Applications development instance also. Package the existing standard Fusion Applications SOA Composite using Enterprise Manager and export it as a complete SOA Archive (SAR) file, resulting in a local .jar file. You may need to ask your system administrator for this. Import the exported SAR .jar file into JDeveloper using the File menu, under the option ‘SOA Archive into SOA Project’. In JDeveloper set the appropriate customization layer values, and then change from the default role to the Fusion Applications Customization Developer role. Make the customizations and save the application project. Finally redeploy the composite application, either to a direct Application Server connection, or as a fresh SAR (jar) file that can then be re-imported and deployed via Enterprise Manager. The Business Process Management (BPM) Suite In addition to the relatively low-level development environment associated with BPEL process creation, Oracle provides a suite of products that allow business process adjustments to be made without the need for some of the programming skills.  The aim is to abstract much of the technical implementation and to provide a Business Analyst tools for immediately implementing organization changes. Obviously there are some limitations on what they can do, however the BPM Suite functionality increases with each release and for the majority of the cases the tools remains as applicable as its developer-orientated sister. At the current time business processes must be explicitly coded to support just one of these use-cases, either BPEL for developer use or BPM for business analyst use. That said, they both run on the same SOA Server in much the same way. The components bundled in each SOA Composite Application can be verified by inspection through Enterprise Manager. Figure 2 – A BPM Process in JDeveloper BPM Suite. BPM processes are written in a standard notation (BPMN) and the modeling tools are very similar to that of BPEL. The steps to deploy a custom BPM process are also essentially much the same, since the BPM process is bundled into a SOA Composite just like a BPEL process. As such the SOA Composite Editor  actually has support for both artifacts and even allows use of them together, such as a calling a BPM process as a partnerlink from a BPEL process. For more details see the references below. Business Analyst Tooling In addition to using JDeveloper extensions for BPM development, there are run-time tools that Business Analysts can use to make adjustments, so that without high costs of an IT project the system can be tuned to match changes to the business operation. The first tool to consider is the BPM Composer, deployed with the middleware SOA Server and accessible online, and for Fusion Applications it is under the Business Process icon on the homepage of the Application Composer. Figure 3 – Business Process Composer showing a CRM process flow. The key difference between this and using JDeveloper is that the BPM Composer has a Business Catalog prepopulated with features and functions that can be used, mostly through registered WebServices. This means no coding or complex interface development is required, simply drag-drop-configure. The items in the business catalog are seeded by either Oracle (as a BPM Template) or added to by your own custom development. You cannot create or generate catalog content from BPM Composer directly. As per the screenshot you can see the Business Catalog content in the BPM Project browser region. In addition, other online tools for use by Business Analysts include the BPM Worklist application for editing business rules and approval management configuration, plus the SOA Composer which focuses on non-approval business rules and domain value maps. At the current time there are only a handful of BPM processes shipped with Fusion Applications HCM and CRM, including on-boarding workers and processing customer registrations.  This also means a limited number of associated BPM Templates provided out-of-the-box, therefore a limited Business Catalog. That said, BPM-based extension is a powerful capability to leverage and will most likely develop going forwards, especially for use in SaaS deployments where full design-time JDeveloper access is not available. Further Reading For BPEL – Fusion Applications Extensibility Guide – Section 12 For BPM – Fusion Applications Extensibility Guide – Section 7 The product-specific documentation and implementation guides for Fusion Applications Fusion Middleware Developers Guide for SOA Suite Modeling and Implementation Guide for Oracle Business Process Management User’s Guide for Oracle Business Process Composer Oracle University courses on BPM Suite and SOA Development

  Read the article

• Reference Data Management

  - by rahulkamath

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableColorfulListAccent2 {mso-style-name:"Colorful List - Accent 2"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:72; mso-style-unhide:no; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-tstyle-shading:#F8EDED; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:25; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; color:black; mso-themecolor:text1;} table.MsoTableColorfulListAccent2FirstRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:first-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#9E3A38; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themeshade:204; mso-tstyle-border-bottom:1.5pt solid white; mso-tstyle-border-bottom-themecolor:background1; color:white; mso-themecolor:background1; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2LastRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:last-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:white; mso-tstyle-shading-themecolor:background1; mso-tstyle-border-top:1.5pt solid black; mso-tstyle-border-top-themecolor:text1; color:#9E3A38; mso-themecolor:accent2; mso-themeshade:204; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2FirstCol {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:first-column; mso-style-priority:72; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2LastCol {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:last-column; mso-style-priority:72; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableColorfulListAccent2OddColumn {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:odd-column; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#EFD3D2; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:63; mso-tstyle-border-top:cell-none; mso-tstyle-border-left:cell-none; mso-tstyle-border-bottom:cell-none; mso-tstyle-border-right:cell-none; mso-tstyle-border-insideh:cell-none; mso-tstyle-border-insidev:cell-none;} table.MsoTableColorfulListAccent2OddRow {mso-style-name:"Colorful List - Accent 2"; mso-table-condition:odd-row; mso-style-priority:72; mso-style-unhide:no; mso-tstyle-shading:#F2DBDB; mso-tstyle-shading-themecolor:accent2; mso-tstyle-shading-themetint:51;} Reference Data Management Oracle Data Relationship Management (DRM) has always been extremely powerful as an Enterprise MDM solution that can help manage changes to master data in a way that influences enterprise structure, whether it be mastering chart of accounts to enable financial transformation, or revamping organization structures to drive business transformation and operational efficiencies, or mastering sales territories in light of rapid fire acquisitions that require frequent sales territory refinement, equitable distribution of leads and accounts to salespersons, and alignment of budget/forecast with results to optimize sales coverage. Increasingly, DRM is also being utilized by Oracle customers for reference data management, an emerging solution space that deserves some explanation. What is reference data? Reference data is a close cousin of master data. While master data may be more rapidly changing, requires consensus building across stakeholders and lends structure to business transactions, reference data is simpler, more slowly changing, but has semantic content that is used to categorize or group other information assets – including master data – and give them contextual value. The following table contains an illustrative list of examples of reference data by type. Reference data types may include types and codes, business taxonomies, complex relationships & cross-domain mappings or standards. Types & Codes Taxonomies Relationships / Mappings Standards Transaction Codes Industry Classification Categories and Codes, e.g., North America Industry Classification System (NAICS) Product / Segment; Product / Geo Calendars (e.g., Gregorian, Fiscal, Manufacturing, Retail, ISO8601) Lookup Tables (e.g., Gender, Marital Status, etc.) Product Categories City à State à Postal Codes Currency Codes (e.g., ISO) Status Codes Sales Territories (e.g., Geo, Industry Verticals, Named Accounts, Federal/State/Local/Defense) Customer / Market Segment; Business Unit / Channel Country Codes (e.g., ISO 3166, UN) Role Codes Market Segments Country Codes / Currency Codes / Financial Accounts Date/Time, Time Zones (e.g., ISO 8601) Domain Values Universal Standard Products and Services Classification (UNSPSC), eCl@ss International Classification of Diseases (ICD) e.g., ICD9 à IC10 mappings Tax Rates Why manage reference data? Reference data carries contextual value and meaning and therefore its use can drive business logic that helps execute a business process, create a desired application behavior or provide meaningful segmentation to analyze transaction data. Further, mapping reference data often requires human judgment. Sample Use Cases of Reference Data Management Healthcare: Diagnostic Codes The reference data challenges in the healthcare industry offer a case in point. Part of being HIPAA compliant requires medical practitioners to transition diagnosis codes from ICD-9 to ICD-10, a medical coding scheme used to classify diseases, signs and symptoms, causes, etc. The transition to ICD-10 has a significant impact on business processes, procedures, contracts, and IT systems. Since both code sets ICD-9 and ICD-10 offer diagnosis codes of very different levels of granularity, human judgment is required to map ICD-9 codes to ICD-10. The process requires collaboration and consensus building among stakeholders much in the same way as does master data management. Moreover, to build reports to understand utilization, frequency and quality of diagnoses, medical practitioners may need to “cross-walk” mappings -- either forward to ICD-10 or backwards to ICD-9 depending upon the reporting time horizon. Spend Management: Product, Service & Supplier Codes Similarly, as an enterprise looks to rationalize suppliers and leverage their spend, conforming supplier codes, as well as product and service codes requires supporting multiple classification schemes that may include industry standards (e.g., UNSPSC, eCl@ss) or enterprise taxonomies. Aberdeen Group estimates that 90% of companies rely on spreadsheets and manual reviews to aggregate, classify and analyze spend data, and that data management activities account for 12-15% of the sourcing cycle and consume 30-50% of a commodity manager’s time. Creating a common map across the extended enterprise to rationalize codes across procurement, accounts payable, general ledger, credit card, procurement card (P-card) as well as ACH and bank systems can cut sourcing costs, improve compliance, lower inventory stock, and free up talent to focus on value added tasks. Specialty Finance: Point of Sales Transaction Codes and Product Codes In the specialty finance industry, enterprises are confronted with usury laws – governed at the state and local level – that regulate financial product innovation as it relates to consumer loans, check cashing and pawn lending. To comply, it is important to demonstrate that transactions booked at the point of sale are posted against valid product codes that were on offer at the time of booking the sale. Since new products are being released at a steady stream, it is important to ensure timely and accurate mapping of point-of-sale transaction codes with the appropriate product and GL codes to comply with the changing regulations. Multi-National Companies: Industry Classification Schemes As companies grow and expand across geographies, a typical challenge they encounter with reference data represents reconciling various versions of industry classification schemes in use across nations. While the United States, Mexico and Canada conform to the North American Industry Classification System (NAICS) standard, European Union countries choose different variants of the NACE industry classification scheme. Multi-national companies must manage the individual national NACE schemes and reconcile the differences across countries. Enterprises must invest in a reference data change management application to address the challenge of distributing reference data changes to downstream applications and assess which applications were impacted by a given change.

  Read the article

• PASS Summit 2010 BI Workshop Feedbacks

  - by Davide Mauri

  As many other speakers already did, I’d like to share with the SQL Community the feedback of my PASS Summit 2010 Workshop. For those who were not there, my workshop was the “BI From A-Z” and the main objective of that workshop was to introduce people in the BI world not only from a technical point of view but insist a lot on the methodological and “engineered” approach. The will to put more engineering in the IT (and specially in the BI field) is something that has been growing stronger and stronger in me every day for of this last 5 years since is simply envy the fact that Airbus, Fincatieri, BMW (just to name a few) can create very complex machine “just” using putting people together and giving them some rules to follow (Of course this is an oversimplification but I think you get what I mean). The key point of engineering is that, after having defined the project blueprint, you have the possibility to give to a huge number of people, the rules to follow, the correct tools in order to implement the rules easily and semi-automatically and a way to measure the quality of the results. Could this be done in IT? Very big question, so my scope is now limited to BI. So that’s the main point of my workshop: and entry-level approach to BI (level was 200) in order to allow attendees to know the basics, to understand what tools they should use for which purpose and, above all, a set of rules and tools in order to make a BI solution scalable in terms of people working on it, while still maintaining a very good quality. All done not focusing only on the practice but explaining the theory behind to see how it can help *a lot* to build a correct solution despite the technology used to implement it. The idea is to reach a point where more then 70% of the work done to create a BI solution can be reused even if technologies changes. This is a very demanding challenge nowadays with the coming of Denali and its column-aligned storage and the shiny-new DAX language. As you may understand I was looking forward to get the feedback since you may have noticed that there’s a lot of “architectural” stuff in IT but really nothing on “engineering”. So how the session could be perceived by the attendees was really unknown to me. The feedback could also give a good indication if the need of more “engineering” is something I feel only by myself or if is something more broad. I’m very happy to be able to say that the overall score of 4.75 put my workshop in the TOP 20 session (on near 200 sessions)! Here’s the detailed evaluations: How would you rate the usefulness of the information presented in your day-to-day environment? 4.75 Answer:    # of Responses 3    1         4    12        5    42               How would you rate the Speaker's presentation skills? 4.80 Answer:    # of Responses 3 : 1         4 : 9         5 : 45               How would you rate the Speaker's knowledge of the subject? 4.95 Answer:    # of Responses 4 :  3         5 : 52               How would you rate the accuracy of the session title, description and experience level to the actual session? 4.75 Answer:    # of Responses 3 : 2         4 : 10         5 : 43               How would you rate the amount of time allocated to cover the topic/session? 4.44 Answer:    # of Responses 3 : 7         4 : 17        5 : 31               How would you rate the quality of the presentation materials? 4.62 Answer:    # of Responses 4 : 21        5 : 34 The comments where all very positive. Many of them asked for more time on the subject (or to shorten the very last topics). I’ll make treasure of these comments and will review the content accordingly. We’ll organize a two-day classes on this topic, where also more examples will be shown and some arguments will be explained more deeply. I’d just like to answer a comment that asks how much of what I shown is “universally applicable”. I can tell you that all of our BI project follow these rules and they’ve been applied to different markets (Insurance, Fashion, GDO) with different people and different teams and they allowed us to be “Adaptive” against the customer. The more the rules are well defined and the more there are tools that supports their implementations, the easier is to add new people to the project and to add or change solution features. Think of a car. How come that almost any mechanic can help you to fix a problem? Because they know what to expect. Because there a rules that allow them to identify the problem without having to discover each time how the car has been implemented build. And this is of course also true for car upgrades/improvements. Last but not least: thanks a lot to everyone for coming!

  Read the article

• Database Migration Scripts: Getting from place A to place B

  - by Phil Factor

  We’ll be looking at a typical database ‘migration’ script which uses an unusual technique to migrate existing ‘de-normalised’ data into a more correct form. So, the book-distribution business that uses the PUBS database has gradually grown organically, and has slipped into ‘de-normalisation’ habits. What’s this? A new column with a list of tags or ‘types’ assigned to books. Because books aren’t really in just one category, someone has ‘cured’ the mismatch between the database and the business requirements. This is fine, but it is now proving difficult for their new website that allows searches by tags. Any request for history book really has to look in the entire list of associated tags rather than the ‘Type’ field that only keeps the primary tag. We have other problems. The TypleList column has duplicates in there which will be affecting the reporting, and there is the danger of mis-spellings getting there. The reporting system can’t be persuaded to do reports based on the tags and the Database developers are complaining about the unCoddly things going on in their database. In your version of PUBS, this extra column doesn’t exist, so we’ve added it and put in 10,000 titles using SQL Data Generator. /* So how do we refactor this database? firstly, we create a table of all the tags. */IF  OBJECT_ID('TagName') IS NULL OR OBJECT_ID('TagTitle') IS NULL  BEGIN  CREATE TABLE  TagName (TagName_ID INT IDENTITY(1,1) PRIMARY KEY ,     Tag VARCHAR(20) NOT NULL UNIQUE)  /* ...and we insert into it all the tags from the list (remembering to take out any leading spaces */  INSERT INTO TagName (Tag)     SELECT DISTINCT LTRIM(x.y.value('.', 'Varchar(80)')) AS [Tag]     FROM     (SELECT  Title_ID,          CONVERT(XML, '<list><i>' + REPLACE(TypeList, ',', '</i><i>') + '</i></list>')          AS XMLkeywords          FROM   dbo.titles)g    CROSS APPLY XMLkeywords.nodes('/list/i/text()') AS x ( y )  /* we can then use this table to provide a table that relates tags to articles */  CREATE TABLE TagTitle   (TagTitle_ID INT IDENTITY(1, 1),   [title_id] [dbo].[tid] NOT NULL REFERENCES titles (Title_ID),   TagName_ID INT NOT NULL REFERENCES TagName (Tagname_ID)   CONSTRAINT [PK_TagTitle]       PRIMARY KEY CLUSTERED ([title_id] ASC, TagName_ID)       ON [PRIMARY])        CREATE NONCLUSTERED INDEX idxTagName_ID  ON  TagTitle (TagName_ID)  INCLUDE (TagTitle_ID,title_id)        /* ...and it is easy to fill this with the tags for each title ... */        INSERT INTO TagTitle (Title_ID, TagName_ID)    SELECT DISTINCT Title_ID, TagName_ID      FROM        (SELECT  Title_ID,          CONVERT(XML, '<list><i>' + REPLACE(TypeList, ',', '</i><i>') + '</i></list>')          AS XMLkeywords          FROM   dbo.titles)g    CROSS APPLY XMLkeywords.nodes('/list/i/text()') AS x ( y )    INNER JOIN TagName ON TagName.Tag=LTRIM(x.y.value('.', 'Varchar(80)'))    END    /* That's all there was to it. Now we can select all titles that have the military tag, just to try things out */SELECT Title FROM titles  INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID  INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID  WHERE tagname.tag='Military'/* and see the top ten most popular tags for titles */SELECT Tag, COUNT(*) FROM titles  INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID  INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID  GROUP BY Tag ORDER BY COUNT(*) DESC/* and if you still want your list of tags for each title, then here they are */SELECT title_ID, title, STUFF(  (SELECT ','+tagname.tag FROM titles thisTitle    INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID    INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID  WHERE ThisTitle.title_id=titles.title_ID  FOR XML PATH(''), TYPE).value('.', 'varchar(max)')  ,1,1,'')    FROM titles  ORDER BY title_ID So we’ve refactored our PUBS database without pain. We’ve even put in a check to prevent it being re-run once the new tables are created. Here is the diagram of the new tag relationship We’ve done both the DDL to create the tables and their associated components, and the DML to put the data in them. I could have also included the script to remove the de-normalised TypeList column, but I’d do a whole lot of tests first before doing that. Yes, I’ve left out the assertion tests too, which should check the edge cases and make sure the result is what you’d expect. One thing I can’t quite figure out is how to deal with an ordered list using this simple XML-based technique. We can ensure that, if we have to produce a list of tags, we can get the primary ‘type’ to be first in the list, but what if the entire order is significant? Thank goodness it isn’t in this case. If it were, we might have to revisit a string-splitter function that returns the ordinal position of each component in the sequence. You’ll see immediately that we can create a synchronisation script for deployment from a comparison tool such as SQL Compare, to change the schema (DDL). On the other hand, no tool could do the DML to stuff the data into the new table, since there is no way that any tool will be able to work out where the data should go. We used some pretty hairy code to deal with a slightly untypical problem. We would have to do this migration by hand, and it has to go into source control as a batch. If most of your database changes are to be deployed by an automated process, then there must be a way of over-riding this part of the data synchronisation process to do this part of the process taking the part of the script that fills the tables, Checking that the tables have not already been filled, and executing it as part of the transaction. Of course, you might prefer the approach I’ve taken with the script of creating the tables in the same batch as the data conversion process, and then using the presence of the tables to prevent the script from being re-run. The problem with scripting a refactoring change to a database is that it has to work both ways. If we install the new system and then have to rollback the changes, several books may have been added, or had their tags changed, in the meantime. Yes, you have to script any rollback! These have to be mercilessly tested, and put in source control just in case of the rollback of a deployment after it has been in place for any length of time. I’ve shown you how to do this with the part of the script .. /* and if you still want your list of tags for each title, then here they are */SELECT title_ID, title, STUFF(  (SELECT ','+tagname.tag FROM titles thisTitle    INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID    INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID  WHERE ThisTitle.title_id=titles.title_ID  FOR XML PATH(''), TYPE).value('.', 'varchar(max)')  ,1,1,'')    FROM titles  ORDER BY title_ID …which would be turned into an UPDATE … FROM script. UPDATE titles SET  typelist= ThisTaglistFROM     (SELECT title_ID, title, STUFF(    (SELECT ','+tagname.tag FROM titles thisTitle      INNER JOIN TagTitle ON titles.title_ID=TagTitle.Title_ID      INNER JOIN Tagname ON Tagname.TagName_ID=TagTitle.TagName_ID    WHERE ThisTitle.title_id=titles.title_ID    ORDER BY CASE WHEN tagname.tag=titles.[type] THEN 1 ELSE 0  END DESC    FOR XML PATH(''), TYPE).value('.', 'varchar(max)')    ,1,1,'')  AS ThisTagList  FROM titles)fINNER JOIN Titles ON f.title_ID=Titles.title_ID You’ll notice that it isn’t quite a round trip because the tags are in a different order, though we’ve managed to make sure that the primary tag is the first one as originally. So, we’ve improved the database for the poor book distributors using PUBS. It is not a major deal but you’ve got to be prepared to provide a migration script that will go both forwards and backwards. Ideally, database refactoring scripts should be able to go from any version to any other. Schema synchronization scripts can do this pretty easily, but no data synchronisation scripts can deal with serious refactoring jobs without the developers being able to specify how to deal with cases like this.

  Read the article

• Clouds Everywhere But not a Drop of Rain – Part 3

  - by sxkumar

  I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan.  I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises.  For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager.  An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc .  Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies.  Summary  But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey.  So to summarize, here are the key takeaways.       It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed.  Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service.  Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

  Read the article

• Automatic Maintenance Jobs in every PDB? New SPM Evolve Advisor Task in Oracle 12.1.0.2

  - by Mike Dietrich

  A customer checking out our slides from the OTN Tour in August 2014 asked me a finicky question the other day: "According to the documentation the Automatic SQL Tuning Advisor maintenance task gets executed only within the CDB$ROOT, but not within each PDB - but the slides are not clear here. So what is the truth?" Ok, that's good question. In my understanding all tasks will get executed within each PDB - that's why we recommend (based on experience) to break up the default maintenance windows when using Oracle Multitenant. Otherwise all PDBs will have the same maintenance windows, and guess what will happen when 25 PDBs start gathering object statistics at the same time ... The documentation indeed says: Automatic SQL Tuning Advisor data is stored in the root. It might have results about SQL statements executed in a PDB that were analyzed by the advisor, but these results are not included if the PDB is unplugged. A common user whose current container is the root can run SQL Tuning Advisor manually for SQL statements from any PDB. When a statement is tuned, it is tuned in any container that runs the statement. This sounds reasonable. But when we have a look into our PDBs or into the CDB_AUTOTASK_CLIENT view the result is different from what the doc says. In my environment I did create just two fresh empty PDBs (CON_ID 3 and 4): SQL> select client_name, status, con_id from cdb_autotask_client; CLIENT_NAME                           STATUS         CON_ID------------------------------------- ---------- ----------auto optimizer stats collection       ENABLED             1sql tuning advisor                    ENABLED             1auto space advisor                    ENABLED             1auto optimizer stats collection       ENABLED             4sql tuning advisor                    ENABLED             4auto space advisor                    ENABLED             4auto optimizer stats collection       ENABLED             3sql tuning advisor                    ENABLED             3auto space advisor                    ENABLED             3 9 rows selected. I haven't verified the reason why this is different from the docs but it may have been related to one change in Oracle Database 12.1.0.2: The new SPM Evolve Advisor Task ( SYS_AUTO_SPM_EVOLVE_TASK) for automatic plan evolution for SQL Plan Management. This new task doesn't appear as a stand-alone job (client) in the maintenance window but runs as a sub-entity of the Automatic SQL Tuning Advisor task. And (I'm just guessing) this may be one of the reasons why every PDB will have to have its own Automatic SQL Tuning Advisor task  Here you'll find more information about how to enable, disable and configure the new Oracle 12.1.0.2 SPM Evolve Advisor Task: Oracle Database 12.1.0.2 SQL Tuning Guide:Managing the SPM Evolve Advisor Task -Mike

  Read the article

• What's up with LDoms: Part 5 - A few Words about Consoles

  - by Stefan Hinker

  Back again to look at a detail of LDom configuration that is often forgotten - the virtual console server. Remember, LDoms are SPARC systems.  As such, each guest will have it's own OBP running.  And to connect to that OBP, the administrator will need a console connection.  Since it's OBP, and not some x86 BIOS, this console will be very serial in nature ;-)  It's really very much like in the good old days, where we had a terminal concentrator where all those serial cables ended up in.  Just like with other components in LDoms, the virtualized solution looks very similar. Every LDom guest requires exactly one console connection.  Envision this similar to the RS-232 port on older SPARC systems.  The LDom framework provides one or more console services that provide access to these connections.  This would be the virtual equivalent of a network terminal server (NTS), where all those serial cables are plugged in.  In the physical world, we'd have a list somewhere, that would tell us which TCP-Port of the NTS was connected to which server.  "ldm list" does just that: root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 0.4% 27d 8h 22m jupiter bound ------ 5002 20 8G mars active -n---- 5000 2 8G 0.5% 55d 14h 10m venus active -n---- 5001 2 8G 0.5% 56d 40m pluto inactive ------ 4 4G The column marked "CONS" tells us, where to reach the console of each domain. In the case of the primary domain, this is actually a (more) physical connection - it's the console connection of the physical system, which is either reachable via the ILOM of that system, or directly via the serial console port on the chassis. All the other guests are reachable through the console service which we created during the inital setup of the system.  Note that pluto does not have a port assigned.  This is because pluto is not yet bound.  (Binding can be viewed very much as the assembly of computer parts - CPU, Memory, disks, network adapters and a serial console cable are all put together when binding the domain.)  Unless we set the port number explicitly, LDoms Manager will do this on a first come, first serve basis.  For just a few domains, this is fine.  For larger deployments, it might be a good idea to assign these port numbers manually using the "ldm set-vcons" command.  However, there is even better magic associated with virtual consoles. You can group several domains into one console group, reachable through one TCP port of the console service.  This can be useful when several groups of administrators are to be given access to different domains, or for other grouping reasons.  Here's an example: root@sun # ldm set-vcons group=planets service=console jupiter root@sun # ldm set-vcons group=planets service=console pluto root@sun # ldm bind jupiter root@sun # ldm bind pluto root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 6.1% 27d 8h 24m jupiter bound ------ 5002 200 8G mars active -n---- 5000 2 8G 0.6% 55d 14h 12m pluto bound ------ 5002 4 4G venus active -n---- 5001 2 8G 0.5% 56d 42m root@sun # telnet localhost 5002 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. sun-vnts-planets: h, l, c{id}, n{name}, q:l DOMAIN ID DOMAIN NAME DOMAIN STATE 2 jupiter online 3 pluto online sun-vnts-planets: h, l, c{id}, n{name}, q:npluto Connecting to console "pluto" in group "planets" .... Press ~? for control options .. What I did here was add the two domains pluto and jupiter to a new console group called "planets" on the service "console" running in the primary domain.  Simply using a group name will create such a group, if it doesn't already exist.  By default, each domain has its own group, using the domain name as the group name.  The group will be available on port 5002, chosen by LDoms Manager because I didn't specify it.  If I connect to that console group, I will now first be prompted to choose the domain I want to connect to from a little menu. Finally, here's an example how to assign port numbers explicitly: root@sun # ldm set-vcons port=5044 group=pluto service=console pluto root@sun # ldm bind pluto root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 16 7680M 3.8% 27d 8h 54m jupiter active -t---- 5002 200 8G 0.5% 30m mars active -n---- 5000 2 8G 0.6% 55d 14h 43m pluto bound ------ 5044 4 4G venus active -n---- 5001 2 8G 0.4% 56d 1h 13m With this, pluto would always be reachable on port 5044 in its own exclusive console group, no matter in which order other domains are bound. Now, you might be wondering why we always have to mention the console service name, "console" in all the examples here.  The simple answer is because there could be more than one such console service.  For all "normal" use, a single console service is absolutely sufficient.  But the system is flexible enough to allow more than that single one, should you need them.  In fact, you could even configure such a console service on a domain other than the primary (or control domain), which would make that domain a real console server.  I actually have a customer who does just that - they want to separate console access from the control domain functionality.  But this is definately a rather sophisticated setup. Something I don't want to go into in this post is access control.  vntsd, which is the daemon providing all these console services, is fully RBAC-aware, and you can configure authorizations for individual users to connect to console groups or individual domain's consoles.  If you can't wait until I get around to security, check out the man page of vntsd. Further reading: The Admin Guide is rather reserved on this subject.  I do recommend to check out the Reference Manual. The manpage for vntsd will discuss all the control sequences as well as the grouping and authorizations mentioned here.

  Read the article

• Project Jigsaw: Late for the train: The Q&A

  - by Mark Reinhold

  I recently proposed, to the Java community in general and to the SE 8 (JSR 337) Expert Group in particular, to defer Project Jigsaw from Java 8 to Java 9. I also proposed to aim explicitly for a regular two-year release cycle going forward. Herewith a summary of the key questions I’ve seen in reaction to these proposals, along with answers. Making the decision Q Has the Java SE 8 Expert Group decided whether to defer the addition of a module system and the modularization of the Platform to Java SE 9? A No, it has not yet decided. Q By when do you expect the EG to make this decision? A In the next month or so. Q How can I make sure my voice is heard? A The EG will consider all relevant input from the wider community. If you have a prominent blog, column, or other communication channel then there’s a good chance that we’ve already seen your opinion. If not, you’re welcome to send it to the Java SE 8 Comments List, which is the EG’s official feedback channel. Q What’s the overall tone of the feedback you’ve received? A The feedback has been about evenly divided as to whether Java 8 should be delayed for Jigsaw, Jigsaw should be deferred to Java 9, or some other, usually less-realistic, option should be taken. Project Jigsaw Q Why is Project Jigsaw taking so long? A Project Jigsaw started at Sun, way back in August 2008. Like many efforts during the final years of Sun, it was not well staffed. Jigsaw initially ran on a shoestring, with just a handful of mostly part-time engineers, so progress was slow. During the integration of Sun into Oracle all work on Jigsaw was halted for a time, but it was eventually resumed after a thorough consideration of the alternatives. Project Jigsaw was really only fully staffed about a year ago, around the time that Java 7 shipped. We’ve added a few more engineers to the team since then, but that can’t make up for the inadequate initial staffing and the time lost during the transition. Q So it’s really just a matter of staffing limitations and corporate-integration distractions? A Aside from these difficulties, the other main factor in the duration of the project is the sheer technical difficulty of modularizing the JDK. Q Why is modularizing the JDK so hard? A There are two main reasons. The first is that the JDK code base is deeply interconnected at both the API and the implementation levels, having been built over many years primarily in the style of a monolithic software system. We’ve spent considerable effort eliminating or at least simplifying as many API and implementation dependences as possible, so that both the Platform and its implementations can be presented as a coherent set of interdependent modules, but some particularly thorny cases remain. Q What’s the second reason? A We want to maintain as much compatibility with prior releases as possible, most especially for existing classpath-based applications but also, to the extent feasible, for applications composed of modules. Q Is modularizing the JDK even necessary? Can’t you just put it in one big module? A Modularizing the JDK, and more specifically modularizing the Java SE Platform, will enable standard yet flexible Java runtime configurations scaling from large servers down to small embedded devices. In the long term it will enable the convergence of Java SE with the higher-end Java ME Platforms. Q Is Project Jigsaw just about modularizing the JDK? A As originally conceived, Project Jigsaw was indeed focused primarily upon modularizing the JDK. The growing demand for a truly standard module system for the Java Platform, which could be used not just for the Platform itself but also for libraries and applications built on top of it, later motivated expanding the scope of the effort. Q As a developer, why should I care about Project Jigsaw? A The introduction of a modular Java Platform will, in the long term, fundamentally change the way that Java implementations, libraries, frameworks, tools, and applications are designed, built, and deployed. Q How much progress has Project Jigsaw made? A We’ve actually made a lot of progress. Much of the core functionality of the module system has been prototyped and works at both compile time and run time. We’ve extended the Java programming language with module declarations, worked out a structure for modular source trees and corresponding compiled-class trees, and implemented these features in javac. We’ve defined an efficient module-file format, extended the JVM to bootstrap a modular JRE, and designed and implemented a preliminary API. We’ve used the module system to make a good first cut at dividing the JDK and the Java SE API into a coherent set of modules. Among other things, we’re currently working to retrofit the java.util.ServiceLoader API to support modular services. Q I want to help! How can I get involved? A Check out the project page, read the draft requirements and design overview documents, download the latest prototype build, and play with it. You can tell us what you think, and follow the rest of our work in real time, on the jigsaw-dev list. The Java Platform Module System JSR Q What’s the relationship between Project Jigsaw and the eventual Java Platform Module System JSR? A At a high level, Project Jigsaw has two phases. In the first phase we’re exploring an approach to modularity that’s markedly different from that of existing Java modularity solutions. We’ve assumed that we can change the Java programming language, the virtual machine, and the APIs. Doing so enables a design which can strongly enforce module boundaries in all program phases, from compilation to deployment to execution. That, in turn, leads to better usability, diagnosability, security, and performance. The ultimate goal of the first phase is produce a working prototype which can inform the work of the Module-System JSR EG. Q What will happen in the second phase of Project Jigsaw? A The second phase will produce the reference implementation of the specification created by the Module-System JSR EG. The EG might ultimately choose an entirely different approach than the one we’re exploring now. If and when that happens then Project Jigsaw will change course as necessary, but either way I think that the end result will be better for having been informed by our current work. Maven & OSGi Q Why not just use Maven? A Maven is a software project management and comprehension tool. As such it can be seen as a kind of build-time module system but, by its nature, it does nothing to support modularity at run time. Q Why not just adopt OSGi? A OSGi is a rich dynamic component system which includes not just a module system but also a life-cycle model and a dynamic service registry. The latter two facilities are useful to some kinds of sophisticated applications, but I don’t think they’re of wide enough interest to be standardized as part of the Java SE Platform. Q Okay, then why not just adopt the module layer of OSGi? A The OSGi module layer is not operative at compile time; it only addresses modularity during packaging, deployment, and execution. As it stands, moreover, it’s useful for library and application modules but, since it’s built strictly on top of the Java SE Platform, it can’t be used to modularize the Platform itself. Q If Maven addresses modularity at build time, and the OSGi module layer addresses modularity during deployment and at run time, then why not just use the two together, as many developers already do? A The combination of Maven and OSGi is certainly very useful in practice today. These systems have, however, been built on top of the existing Java platform; they have not been able to change the platform itself. This means, among other things, that module boundaries are weakly enforced, if at all, which makes it difficult to diagnose configuration errors and impossible to run untrusted code securely. The prototype Jigsaw module system, by contrast, aims to define a platform-level solution which extends both the language and the JVM in order to enforce module boundaries strongly and uniformly in all program phases. Q If the EG chooses an approach like the one currently being taken in the Jigsaw prototype, will Maven and OSGi be made obsolete? A No, not at all! No matter what approach is taken, to ensure wide adoption it’s essential that the standard Java Platform Module System interact well with Maven. Applications that depend upon the sophisticated features of OSGi will no doubt continue to use OSGi, so it’s critical that implementations of OSGi be able to run on top of the Java module system and, if suitably modified, support OSGi bundles that depend upon Java modules. Ideas for how to do that are currently being explored in Project Penrose. Java 8 & Java 9 Q Without Jigsaw, won’t Java 8 be a pretty boring release? A No, far from it! It’s still slated to include the widely-anticipated Project Lambda (JSR 335), work on which has been going very well, along with the new Date/Time API (JSR 310), Type Annotations (JSR 308), and a set of smaller features already in progress. Q Won’t deferring Jigsaw to Java 9 delay the eventual convergence of the higher-end Java ME Platforms with Java SE? A It will slow that transition, but it will not stop it. To allow progress toward that convergence to be made with Java 8 I’ve suggested to the Java SE 8 EG that we consider specifying a small number of Profiles which would allow compact configurations of the SE Platform to be built and deployed. Q If Jigsaw is deferred to Java 9, would the Oracle engineers currently working on it be reassigned to other Java 8 features and then return to working on Jigsaw again after Java 8 ships? A No, these engineers would continue to work primarily on Jigsaw from now until Java 9 ships. Q Why not drop Lambda and finish Jigsaw instead? A Even if the engineers currently working on Lambda could instantly switch over to Jigsaw and immediately become productive—which of course they can’t—there are less than nine months remaining in the Java 8 schedule for work on major features. That’s just not enough time for the broad review, testing, and feedback which such a fundamental change to the Java Platform requires. Q Why not ship the module system in Java 8, and then modularize the platform in Java 9? A If we deliver a module system in one release but don’t use it to modularize the JDK until some later release then we run a big risk of getting something fundamentally wrong. If that happens then we’d have to fix it in the later release, and fixing fundamental design flaws after the fact almost always leads to a poor end result. Q Why not ship Jigsaw in an 8.5 release, less than two years after 8? Or why not just ship a new release every year, rather than every other year? A Many more developers work on the JDK today than a couple of years ago, both because Oracle has dramatically increased its own investment and because other organizations and individuals have joined the OpenJDK Community. Collectively we don’t, however, have the bandwidth required to ship and then provide long-term support for a big JDK release more frequently than about every other year. Q What’s the feedback been on the two-year release-cycle proposal? A For just about every comment that we should release more frequently, so that new features are available sooner, there’s been another asking for an even slower release cycle so that large teams of enterprise developers who ship mission-critical applications have a chance to migrate at a comfortable pace.

  Read the article

• FOUR questions to ask if you are implementing DATABASE-AS-A-SERVICE

  - by Sudip Datta

  During my ongoing tenure at Oracle, I have met all types of DBAs. Happy DBAs, unhappy DBAs, proud DBAs, risk-loving DBAs, cautious DBAs. These days, as Database-as-a-Service (DBaaS) becomes more mainstream, I find some complacent DBAs who are basking in their achievement of having implemented DBaaS. Some others, however, are not that happy. They grudgingly complain that they did not have much of a say in the implementation, they simply had to follow what their cloud architects (mostly infrastructure admins) offered them. In most cases it would be a database wrapped inside a VM that would be labeled as “Database as a Service”. In other cases, it would be existing brute-force automation simply exposed in a portal. As much as I think that there is more to DBaaS than those approaches and often get tempted to propose Enterprise Manager 12c, I try to be objective. Neither do I want to dampen the spirit of the happy ones, nor do I want to stoke the pain of the unhappy ones. As I mentioned in my previous post, I don’t deny vanilla automation could be useful. I like virtualization too for what it has helped us accomplish in terms of resource management, but we need to scrutinize its merit on a case-by-case basis and apply it meaningfully. For DBAs who either claim to have implemented DBaaS or are planning to do so, I simply want to provide four key questions to ponder about: 1. Does it make life easier for your end users? Database-as-a-Service can have several types of end users. Junior DBAs, QA Engineers, Developers- each having their own skillset. The objective of DBaaS is to make their life simple, so that they can focus on their core responsibilities without having to worry about additional stuff. For example, if you are a Developer using Oracle Application Express (APEX), you want to deal with schema, objects and PL/SQL code and not with datafiles or listener configuration. If you are a QA Engineer needing database copies for functional testing, you do not want to deal with underlying operating system patching and compliance issues. The question to ask, therefore, is, whether DBaaS makes life easier for those users. It is often convenient to give them VM shells to deal with a la Amazon EC2 IaaS, but is that what they really want? Is it a productive use of a developer's time if he needs to apply RPM errata to his Linux operating system. Asking him to keep the underlying operating system current is like making a guest responsible for a restaurant's decor. 2. Does it make life easier for your administrators? Cloud, in general, is supposed to free administrators from attending to mundane tasks like provisioning services for every single end user request. It is supposed to enable a readily consumable platform and enforce standardization in the process. For example, if a Service Catalog exposes DBaaS of specific database versions and configurations, it, by its very nature, enforces certain discipline and standardization within the IT environment. What if, instead of specific database configurations, cloud allowed each end user to create databases of their liking resulting in hundreds of version and patch levels and thousands of individual databases. Therefore the right question to ask is whether the unwanted consequence of DBaaS is OS and database sprawl. And if so, who is responsible for tracking them, backing them up, administering them? Studies have shown that these administrative overheads increase exponentially with new targets, and it could result in a management nightmare. That leads us to our next question. 3. Does it satisfy your Security Officers and Compliance Auditors? Compliance Auditors need to know who did what and when. They also want the cloud platform to be secure, so that end users have little freedom in tampering with it. Dealing with VM sprawl is not the easiest of challenges, let alone dealing with them as they keep getting reconfigured and moved around. This leads to the proverbial needle in the haystack problem, and all it needs is one needle to cause a serious compliance issue in the enterprise. Bottomline is, flexibility and agility should not come at the expense of compliance and it is very important to get the balance right. Can we have security and isolation without creating compliance challenges? Instead of a ‘one size fits all approach’ i.e. OS level isolation, can we think smartly about database isolation or schema based isolation? This is where the appropriate resource modeling needs to be applied. The usual systems management vendors out there with heterogeneous common-denominator approach have compromised on these semantics. If you follow Enterprise Manager’s DBaaS solution, you will see that we have considered different models, not precluding virtualization, for different customer use cases. The judgment to use virtual assemblies versus databases on physical RAC versus Schema-as-a-Service in a single database, should be governed by the need of the applications and not by putting compliance considerations in the backburner. 4. Does it satisfy your CIO? Finally, does it satisfy your higher ups? As the sponsor of cloud initiative, the CIO is expected to lead an IT transformation project, not merely a run-of-the-mill IT operations. Simply virtualizing server resources and delivering them through self-service is a good start, but hardly transformational. CIOs may appreciate the instant benefit from server consolidation, but studies have revealed that the ROI from consolidation would flatten out at 20-25%. The question would be: what next? As we go higher up in the stack, the need to virtualize, segregate and optimize shifts to those layers that are more palpable to the business users. As Sushil Kumar noted in his blog post, " the most important thing to note here is the enterprise private cloud is not just an IT project, rather it is a business initiative to create an IT setup that is more aligned with the needs of today's dynamic and highly competitive business environment." Business users could not care less about infrastructure consolidation or virtualization - they care about business agility and service level assurance. Last but not the least, lot of CIOs get miffed if we ask them to throw away their existing hardware investments for implementing DBaaS. In Oracle, we always emphasize on freedom of choosing a platform; hence Enterprise Manager’s DBaaS solution is platform neutral. It can work on any Operating System (that the agent is certified on) Oracle’s hardware as well as 3rd party hardware. As a parting note, I urge you to remember these 4 questions. Remember that your satisfaction as an implementer lies in the satisfaction of others.

  Read the article

• Adding multiple data importers support to web applications

  - by DigiMortal

  I’m building web application for customer and there is requirement that users must be able to import data in different formats. Today we will support XLSX and ODF as import formats and some other formats are waiting. I wanted to be able to add new importers on the fly so I don’t have to deploy web application again when I add new importer or change some existing one. In this posting I will show you how to build generic importers support to your web application. Importer interface All importers we use must have something in common so we can easily detect them. To keep things simple I will use interface here. public interface IMyImporter {     string[] SupportedFileExtensions { get; }     ImportResult Import(Stream fileStream, string fileExtension); } Our interface has the following members: SupportedFileExtensions – string array of file extensions that importer supports. This property helps us find out what import formats are available and which importer to use with given format. Import – method that does the actual importing work. Besides file we give in as stream we also give file extension so importer can decide how to handle the file. It is enough to get started. When building real importers I am sure you will switch over to abstract base class. Importer class Here is sample importer that imports data from Excel and Word documents. Importer class with no implementation details looks like this: public class MyOpenXmlImporter : IMyImporter {     public string[] SupportedFileExtensions     {         get { return new[] { "xlsx", "docx" }; }     }     public ImportResult Import(Stream fileStream, string extension)     {         // ...     } } Finding supported import formats in web application Now we have importers created and it’s time to add them to web application. Usually we have one page or ASP.NET MVC controller where we need importers. To this page or controller we add the following method that uses reflection to find all classes that implement our IMyImporter interface. private static string[] GetImporterFileExtensions() {     var types = from a in AppDomain.CurrentDomain.GetAssemblies()                 from t in a.GetTypes()                 where t.GetInterfaces().Contains(typeof(IMyImporter))                 select t;       var extensions = new Collection<string>();     foreach (var type in types)     {         var instance = (IMyImporter)type.InvokeMember(null,                        BindingFlags.CreateInstance, null, null, null);           foreach (var extension in instance.SupportedFileExtensions)         {             if (extensions.Contains(extension))                 continue;               extensions.Add(extension);         }     }       return extensions.ToArray(); } This code doesn’t look nice and is far from optimal but it works for us now. It is possible to improve performance of web application if we cache extensions and their corresponding types to some static dictionary. We have to fill it only once because our application is restarted when something changes in bin folder. Finding importer by extension When user uploads file we need to detect the extension of file and find the importer that supports given extension. We add another method to our page or controller that uses reflection to return us importer instance or null if extension is not supported. private static IMyImporter GetImporterForExtension(string extensionToFind) {     var types = from a in AppDomain.CurrentDomain.GetAssemblies()                 from t in a.GetTypes()                 where t.GetInterfaces().Contains(typeof(IMyImporter))                 select t;     foreach (var type in types)     {         var instance = (IMyImporter)type.InvokeMember(null,                        BindingFlags.CreateInstance, null, null, null);           if (instance.SupportedFileExtensions.Contains(extensionToFind))         {             return instance;         }     }       return null; } Here is example ASP.NET MVC controller action that accepts uploaded file, finds importer that can handle file and imports data. Again, this is sample code I kept minimal to better illustrate how things work. public ActionResult Import(MyImporterModel model) {     var file = Request.Files[0];     var extension = Path.GetExtension(file.FileName).ToLower();     var importer = GetImporterForExtension(extension.Substring(1));     var result = importer.Import(file.InputStream, extension);     if (result.Errors.Count > 0)     {         foreach (var error in result.Errors)             ModelState.AddModelError("file", error);           return Import();     }     return RedirectToAction("Index"); } Conclusion That’s it. Using couple of ugly methods and one simple interface we were able to add importers support to our web application. Example code here is not perfect but it works. It is possible to cache mappings between file extensions and importer types to some static variable because changing of these mappings means that something is changed in bin folder of web application and web application is restarted in this case anyway.

  Read the article

• Stumbling Through: Visual Studio 2010 (Part III)

  The last post ended with us just getting started on stumbling into text template file customization, a task that required a Visual Studio extension (Tangible T4 Editor) to even have a chance at completing.  Despite the benefits of the Tangible T4 Editor, I still had a hard time putting together a solid text template that would be easy to explain.  This is mostly due to the way the files allow you to mix code (encapsulated in <# #>) with straight-up text to generate.  It is effective to be sure, but not very readable.  Nevertheless, I will try and explain what was accomplished in my custom tt file, though the details of which are not really the point of this article (my way of saying dont criticize my crappy code, and certainly dont use it in any somewhat real application.  You may become dumber just by looking at this code.  You have been warned really the footnote I should put at the end of all of my blog posts). To begin with, there were two basic requirements that I needed the code generator to satisfy:  Reading one to many entity framework files, and using the entities that were found to write one to many class files.  Thankfully, using the Entity Object Generator as a starting point gave us an example on how to do exactly that by using the MetadataLoader and EntityFrameworkTemplateFileManager you include references to these items and use them like so: // Instantiate an entity framework file reader and file writer MetadataLoader loader = new MetadataLoader(this); EntityFrameworkTemplateFileManager fileManager = EntityFrameworkTemplateFileManager.Create(this); // Load the entity model metadata workspace MetadataWorkspace metadataWorkspace = null; bool allMetadataLoaded =loader.TryLoadAllMetadata("MFL.tt", out metadataWorkspace); EdmItemCollection ItemCollection = (EdmItemCollection)metadataWorkspace.GetItemCollection(DataSpace.CSpace); // Create an IO class to contain the 'get' methods for all entities in the model fileManager.StartNewFile("MFL.IO.gen.cs"); Next, we want to be able to loop through all of the entities found in the model, and then each property for each entity so we can generate classes and methods for each.  The code for that is blissfully simple: // Iterate through each entity in the model foreach (EntityType entity in ItemCollection.GetItems<EntityType>().OrderBy(e => e.Name)) {     // Iterate through each primitive property of the entity     foreach (EdmProperty edmProperty in entity.Properties.Where(p => p.TypeUsage.EdmType is PrimitiveType && p.DeclaringType == entity))     {         // TODO:  Create properties     }     // Iterate through each relationship of the entity     foreach (NavigationProperty navProperty in entity.NavigationProperties.Where(np => np.DeclaringType == entity))     {         // TODO:  Create associations     } } There really isnt anything more advanced than that going on in the text template the only thing I had to blunder through was realizing that if you want the generator to interpret a line of code (such as our iterations above), you need to enclose the code in <# and #> while if you want the generator to interpret the VALUE of code, such as putting the entity name into the class name, you need to enclose the code in <#= and #> like so: public partial class <#=entity.Name#> To make a long story short, I did a lot of repetition of the above to come up with a text template that generates a class for each entity based on its properties, and a set of IO methods for each entity based on its relationships.  The two work together to provide lazy-loading for hierarchical data (such getting Team.Players) so it should be pretty intuitive to use on a front-end.  This text template is available here you can tweak the inputFiles array to load one or many different edmx models and generate the basic xml IO and class files, though it will probably only work correctly in the simplest of cases, like our MFL model described in the previous post.  Additionally, there is no validation, logging or error handling which is something I want to handle later by stumbling through the enterprise library 5.0. The code that gets generated isnt anything special, though using the LINQ to XML feature was something very new and exciting for me I had only worked with XML in the past using the DOM or XML Reader objects along with XPath, and the LINQ to XML model is just so much more elegant and supposedly efficient (something to test later).  For example, the following code was generated to create a Player object for each Player node in the XML:         return from element in GetXmlData(_PlayerDataFile).Descendants("Player")             select new Player             {                 Id = int.Parse(element.Attribute("Id").Value)                 ,ParentName = element.Parent.Name.LocalName                 ,ParentId = long.Parse(element.Parent.Attribute("Id").Value)                 ,Name = element.Attribute("Name").Value                 ,PositionId = int.Parse(element.Attribute("PositionId").Value)             }; It is all done in one line of code, no looping needed.  Even though GetXmlData loads the entire xml file just like the old XML DOM approach would have, it is supposed to be much less resource intensive.  I will definitely put that to the test after we develop a user interface for getting at this data.  Speaking of the data where IS the data?  Weve put together a pretty model and a bunch of code around it, but we dont have any data to speak of.  We can certainly drop to our favorite XML editor and crank out some data, but if it doesnt totally match our model, it will not load correctly.  To help with this, Ive built in a method to generate xml at any given layer in the hierarchy.  So for us to get the closest possible thing to real data, wed need to invoke MFL.IO.GenerateTeamXML and save the results to file.  Doing so should get us something that looks like this: <Team Id="0" Name="0">   <Player Id="0" Name="0" PositionId="0">     <Statistic Id="0" PassYards="0" RushYards="0" Year="0" />   </Player> </Team> Sadly, it is missing the Positions node (havent thought of a way to generate lookup xml yet) and the data itself isnt quite realistic (well, as realistic as MFL data can be anyway).  Lets manually remedy that for now to give us a decent starter set of data.  Note that this is TWO xml files Lookups.xml and Teams.xml: <Lookups Id=0>   <Position Id="0" Name="Quarterback"/>   <Position Id="1" Name="Runningback"/> </Lookups> <Teams Id=0>   <Team Id="0" Name="Chicago">     <Player Id="0" Name="QB Bears" PositionId="0">       <Statistic Id="0" PassYards="4000" RushYards="120" Year="2008" />       <Statistic Id="1" PassYards="4200" RushYards="180" Year="2009" />     </Player>     <Player Id="1" Name="RB Bears" PositionId="1">       <Statistic Id="2" PassYards="0" RushYards="800" Year="2007" />       <Statistic Id="3" PassYards="0" RushYards="1200" Year="2008" />       <Statistic Id="4" PassYards="3" RushYards="1450" Year="2009" />     </Player>   </Team> </Teams> Ok, so we have some data, we have a way to read/write that data and we have a friendly way of representing that data.  Now, what remains is the part that I have been looking forward to the most: present the data to the user and give them the ability to add/update/delete, and doing so in a way that is very intuitive (easy) from a development standpoint.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Stumbling Through: Visual Studio 2010 (Part III)

  The last post ended with us just getting started on stumbling into text template file customization, a task that required a Visual Studio extension (Tangible T4 Editor) to even have a chance at completing.  Despite the benefits of the Tangible T4 Editor, I still had a hard time putting together a solid text template that would be easy to explain.  This is mostly due to the way the files allow you to mix code (encapsulated in <# #>) with straight-up text to generate.  It is effective to be sure, but not very readable.  Nevertheless, I will try and explain what was accomplished in my custom tt file, though the details of which are not really the point of this article (my way of saying dont criticize my crappy code, and certainly dont use it in any somewhat real application.  You may become dumber just by looking at this code.  You have been warned really the footnote I should put at the end of all of my blog posts). To begin with, there were two basic requirements that I needed the code generator to satisfy:  Reading one to many entity framework files, and using the entities that were found to write one to many class files.  Thankfully, using the Entity Object Generator as a starting point gave us an example on how to do exactly that by using the MetadataLoader and EntityFrameworkTemplateFileManager you include references to these items and use them like so: // Instantiate an entity framework file reader and file writer MetadataLoader loader = new MetadataLoader(this); EntityFrameworkTemplateFileManager fileManager = EntityFrameworkTemplateFileManager.Create(this); // Load the entity model metadata workspace MetadataWorkspace metadataWorkspace = null; bool allMetadataLoaded =loader.TryLoadAllMetadata("MFL.tt", out metadataWorkspace); EdmItemCollection ItemCollection = (EdmItemCollection)metadataWorkspace.GetItemCollection(DataSpace.CSpace); // Create an IO class to contain the 'get' methods for all entities in the model fileManager.StartNewFile("MFL.IO.gen.cs"); Next, we want to be able to loop through all of the entities found in the model, and then each property for each entity so we can generate classes and methods for each.  The code for that is blissfully simple: // Iterate through each entity in the model foreach (EntityType entity in ItemCollection.GetItems<EntityType>().OrderBy(e => e.Name)) {     // Iterate through each primitive property of the entity     foreach (EdmProperty edmProperty in entity.Properties.Where(p => p.TypeUsage.EdmType is PrimitiveType && p.DeclaringType == entity))     {         // TODO:  Create properties     }     // Iterate through each relationship of the entity     foreach (NavigationProperty navProperty in entity.NavigationProperties.Where(np => np.DeclaringType == entity))     {         // TODO:  Create associations     } } There really isnt anything more advanced than that going on in the text template the only thing I had to blunder through was realizing that if you want the generator to interpret a line of code (such as our iterations above), you need to enclose the code in <# and #> while if you want the generator to interpret the VALUE of code, such as putting the entity name into the class name, you need to enclose the code in <#= and #> like so: public partial class <#=entity.Name#> To make a long story short, I did a lot of repetition of the above to come up with a text template that generates a class for each entity based on its properties, and a set of IO methods for each entity based on its relationships.  The two work together to provide lazy-loading for hierarchical data (such getting Team.Players) so it should be pretty intuitive to use on a front-end.  This text template is available here you can tweak the inputFiles array to load one or many different edmx models and generate the basic xml IO and class files, though it will probably only work correctly in the simplest of cases, like our MFL model described in the previous post.  Additionally, there is no validation, logging or error handling which is something I want to handle later by stumbling through the enterprise library 5.0. The code that gets generated isnt anything special, though using the LINQ to XML feature was something very new and exciting for me I had only worked with XML in the past using the DOM or XML Reader objects along with XPath, and the LINQ to XML model is just so much more elegant and supposedly efficient (something to test later).  For example, the following code was generated to create a Player object for each Player node in the XML:         return from element in GetXmlData(_PlayerDataFile).Descendants("Player")             select new Player             {                 Id = int.Parse(element.Attribute("Id").Value)                 ,ParentName = element.Parent.Name.LocalName                 ,ParentId = long.Parse(element.Parent.Attribute("Id").Value)                 ,Name = element.Attribute("Name").Value                 ,PositionId = int.Parse(element.Attribute("PositionId").Value)             }; It is all done in one line of code, no looping needed.  Even though GetXmlData loads the entire xml file just like the old XML DOM approach would have, it is supposed to be much less resource intensive.  I will definitely put that to the test after we develop a user interface for getting at this data.  Speaking of the data where IS the data?  Weve put together a pretty model and a bunch of code around it, but we dont have any data to speak of.  We can certainly drop to our favorite XML editor and crank out some data, but if it doesnt totally match our model, it will not load correctly.  To help with this, Ive built in a method to generate xml at any given layer in the hierarchy.  So for us to get the closest possible thing to real data, wed need to invoke MFL.IO.GenerateTeamXML and save the results to file.  Doing so should get us something that looks like this: <Team Id="0" Name="0">   <Player Id="0" Name="0" PositionId="0">     <Statistic Id="0" PassYards="0" RushYards="0" Year="0" />   </Player> </Team> Sadly, it is missing the Positions node (havent thought of a way to generate lookup xml yet) and the data itself isnt quite realistic (well, as realistic as MFL data can be anyway).  Lets manually remedy that for now to give us a decent starter set of data.  Note that this is TWO xml files Lookups.xml and Teams.xml: <Lookups Id=0>   <Position Id="0" Name="Quarterback"/>   <Position Id="1" Name="Runningback"/> </Lookups> <Teams Id=0>   <Team Id="0" Name="Chicago">     <Player Id="0" Name="QB Bears" PositionId="0">       <Statistic Id="0" PassYards="4000" RushYards="120" Year="2008" />       <Statistic Id="1" PassYards="4200" RushYards="180" Year="2009" />     </Player>     <Player Id="1" Name="RB Bears" PositionId="1">       <Statistic Id="2" PassYards="0" RushYards="800" Year="2007" />       <Statistic Id="3" PassYards="0" RushYards="1200" Year="2008" />       <Statistic Id="4" PassYards="3" RushYards="1450" Year="2009" />     </Player>   </Team> </Teams> Ok, so we have some data, we have a way to read/write that data and we have a friendly way of representing that data.  Now, what remains is the part that I have been looking forward to the most: present the data to the user and give them the ability to add/update/delete, and doing so in a way that is very intuitive (easy) from a development standpoint.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How can I eager-load a child collection mapped to a non-primary key in NHibernate 2.1.2?

  - by David Rubin

  Hi, I have two objects with a many-to-many relationship between them, as follows: public class LeftHandSide { public LeftHandSide() { Name = String.Empty; Rights = new HashSet<RightHandSide>(); } public int Id { get; set; } public string Name { get; set; } public ICollection<RightHandSide> Rights { get; set; } } public class RightHandSide { public RightHandSide() { OtherProp = String.Empty; Lefts = new HashSet<LeftHandSide>(); } public int Id { get; set; } public string OtherProp { get; set; } public ICollection<LeftHandSide> Lefts { get; set; } } and I'm using a legacy database, so my mappings look like: Notice that LeftHandSide and RightHandSide are associated by a different column than RightHandSide's primary key. <class name="LeftHandSide" table="[dbo].[lefts]" lazy="false"> <id name="Id" column="ID" unsaved-value="0"> <generator class="identity" /> </id> <property name="Name" not-null="true" /> <set name="Rights" table="[dbo].[lefts2rights]"> <key column="leftId" /> <!-- THIS IS THE IMPORTANT BIT: I MUST USE PROPERTY-REF --> <many-to-many class="RightHandSide" column="rightProp" property-ref="OtherProp" /> </set> </class> <class name="RightHandSide" table="[dbo].[rights]" lazy="false"> <id name="Id" column="id" unsaved-value="0"> <generator class="identity" /> </id> <property name="OtherProp" column="otherProp" /> <set name="Lefts" table="[dbo].[lefts2rights]"> <!-- THIS IS THE IMPORTANT BIT: I MUST USE PROPERTY-REF --> <key column="rightProp" property-ref="OtherProp" /> <many-to-many class="LeftHandSide" column="leftId" /> </set> </class> The problem comes when I go to do a query: LeftHandSide lhs = _session.CreateCriteria<LeftHandSide>() .Add(Expression.IdEq(13)) .UniqueResult<LeftHandSide>(); works just fine. But LeftHandSide lhs = _session.CreateCriteria<LeftHandSide>() .Add(Expression.IdEq(13)) .SetFetchMode("Rights", FetchMode.Join) .UniqueResult<LeftHandSide>(); throws an exception (see below). Interestingly, RightHandSide rhs = _session.CreateCriteria<RightHandSide>() .Add(Expression.IdEq(127)) .SetFetchMode("Lefts", FetchMode.Join) .UniqueResult<RightHandSide>(); seems to be perfectly fine as well. NHibernate.Exceptions.GenericADOException Message: Error performing LoadByUniqueKey[SQL: SQL not available] Source: NHibernate StackTrace: c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(563,0): at NHibernate.Type.EntityType.LoadByUniqueKey(String entityName, String uniqueKeyPropertyName, Object key, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(428,0): at NHibernate.Type.EntityType.ResolveIdentifier(Object value, ISessionImplementor session, Object owner) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(300,0): at NHibernate.Type.EntityType.NullSafeGet(IDataReader rs, String[] names, ISessionImplementor session, Object owner) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Persister\Collection\AbstractCollectionPersister.cs(695,0): at NHibernate.Persister.Collection.AbstractCollectionPersister.ReadElement(IDataReader rs, Object owner, String[] aliases, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Collection\Generic\PersistentGenericSet.cs(54,0): at NHibernate.Collection.Generic.PersistentGenericSet`1.ReadFrom(IDataReader rs, ICollectionPersister role, ICollectionAliases descriptor, Object owner) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(706,0): at NHibernate.Loader.Loader.ReadCollectionElement(Object optionalOwner, Object optionalKey, ICollectionPersister persister, ICollectionAliases descriptor, IDataReader rs, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(385,0): at NHibernate.Loader.Loader.ReadCollectionElements(Object[] row, IDataReader resultSet, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(326,0): at NHibernate.Loader.Loader.GetRowFromResultSet(IDataReader resultSet, ISessionImplementor session, QueryParameters queryParameters, LockMode[] lockModeArray, EntityKey optionalObjectKey, IList hydratedObjects, EntityKey[] keys, Boolean returnProxies) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(453,0): at NHibernate.Loader.Loader.DoQuery(ISessionImplementor session, QueryParameters queryParameters, Boolean returnProxies) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(236,0): at NHibernate.Loader.Loader.DoQueryAndInitializeNonLazyCollections(ISessionImplementor session, QueryParameters queryParameters, Boolean returnProxies) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(1649,0): at NHibernate.Loader.Loader.DoList(ISessionImplementor session, QueryParameters queryParameters) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(1568,0): at NHibernate.Loader.Loader.ListIgnoreQueryCache(ISessionImplementor session, QueryParameters queryParameters) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(1562,0): at NHibernate.Loader.Loader.List(ISessionImplementor session, QueryParameters queryParameters, ISet`1 querySpaces, IType[] resultTypes) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Criteria\CriteriaLoader.cs(73,0): at NHibernate.Loader.Criteria.CriteriaLoader.List(ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\SessionImpl.cs(1936,0): at NHibernate.Impl.SessionImpl.List(CriteriaImpl criteria, IList results) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(246,0): at NHibernate.Impl.CriteriaImpl.List(IList results) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(237,0): at NHibernate.Impl.CriteriaImpl.List() c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(398,0): at NHibernate.Impl.CriteriaImpl.UniqueResult() c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(263,0): at NHibernate.Impl.CriteriaImpl.UniqueResult[T]() D:\proj\CMS3\branches\nh_auth\DomainModel2Tests\Authorization\TempTests.cs(46,0): at CMS.DomainModel.Authorization.TempTests.Test1() Inner Exception System.Collections.Generic.KeyNotFoundException Message: The given key was not present in the dictionary. Source: mscorlib StackTrace: at System.ThrowHelper.ThrowKeyNotFoundException() at System.Collections.Generic.Dictionary`2.get_Item(TKey key) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Persister\Entity\AbstractEntityPersister.cs(2047,0): at NHibernate.Persister.Entity.AbstractEntityPersister.GetAppropriateUniqueKeyLoader(String propertyName, IDictionary`2 enabledFilters) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Persister\Entity\AbstractEntityPersister.cs(2037,0): at NHibernate.Persister.Entity.AbstractEntityPersister.LoadByUniqueKey(String propertyName, Object uniqueKey, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(552,0): at NHibernate.Type.EntityType.LoadByUniqueKey(String entityName, String uniqueKeyPropertyName, Object key, ISessionImplementor session) I'm using NHibernate 2.1.2 and I've been debugging into the NHibernate source, but I'm coming up empty. Any suggestions? Thanks so much!

  Read the article

• SL3/SL4 - Ado.Net Data Services Error during new DataServiceCollection<T>(queryResponse)

  - by Soulhuntre

  Hey all, I have two functions in a SL project (VS2010) that do almost exactly the same thing, yet one throws an error and the other does not. It seems to be related to the projections, but I am unsure about the best way to resolve. The function that works is... public void LoadAllChunksExpandAll(DataHelperReturnHandler handler, string orderby) { DataServiceCollection<CmsChunk> data = null; DataServiceQuery<CmsChunk> theQuery = _dataservice .CmsChunks .Expand("CmsItemState") .AddQueryOption("$orderby", orderby); theQuery.BeginExecute( delegate(IAsyncResult asyncResult) { _callback_dispatcher.BeginInvoke( () => { try { DataServiceQuery<CmsChunk> query = asyncResult.AsyncState as DataServiceQuery<CmsChunk>; if (query != null) { //create a tracked DataServiceCollection from the result of the asynchronous query. QueryOperationResponse<CmsChunk> queryResponse = query.EndExecute(asyncResult) as QueryOperationResponse<CmsChunk>; data = new DataServiceCollection<CmsChunk>(queryResponse); handler(data); } } catch { handler(data); } } ); }, theQuery ); } This compiles and runs as expected. A very, very similar function (shown below) fails... public void LoadAllPagesExpandAll(DataHelperReturnHandler handler, string orderby) { DataServiceCollection<CmsPage> data = null; DataServiceQuery<CmsPage> theQuery = _dataservice .CmsPages .Expand("CmsChildPages") .Expand("CmsParentPage") .Expand("CmsItemState") .AddQueryOption("$orderby", orderby); theQuery.BeginExecute( delegate(IAsyncResult asyncResult) { _callback_dispatcher.BeginInvoke( () => { try { DataServiceQuery<CmsPage> query = asyncResult.AsyncState as DataServiceQuery<CmsPage>; if (query != null) { //create a tracked DataServiceCollection from the result of the asynchronous query. QueryOperationResponse<CmsPage> queryResponse = query.EndExecute(asyncResult) as QueryOperationResponse<CmsPage>; data = new DataServiceCollection<CmsPage>(queryResponse); handler(data); } } catch { handler(data); } } ); }, theQuery ); } Clearly the issue is the Expand projections that involve a self referencing relationship (pages can contain other pages). This is under SL4 or SL3 using ADONETDataServices SL3 Update CTP3. I am open to any work around or pointers to goo information, a Google search for the error results in two hits, neither particularly helpful that I can decipher. The short error is "An item could not be added to the collection. When items in a DataServiceCollection are tracked by the DataServiceContext, new items cannot be added before items have been loaded into the collection." The full error is... System.Reflection.TargetInvocationException was caught Message=Exception has been thrown by the target of an invocation. StackTrace: at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters) at System.Data.Services.Client.ClientType.ClientProperty.SetValue(Object instance, Object value, String propertyName, Boolean allowAdd) at System.Data.Services.Client.AtomMaterializer.ApplyItemsToCollection(AtomEntry entry, ClientProperty property, IEnumerable items, Uri nextLink, ProjectionPlan continuationPlan) at System.Data.Services.Client.AtomMaterializer.ApplyFeedToCollection(AtomEntry entry, ClientProperty property, AtomFeed feed, Boolean includeLinks) at System.Data.Services.Client.AtomMaterializer.MaterializeResolvedEntry(AtomEntry entry, Boolean includeLinks) at System.Data.Services.Client.AtomMaterializer.Materialize(AtomEntry entry, Type expectedEntryType, Boolean includeLinks) at System.Data.Services.Client.AtomMaterializer.DirectMaterializePlan(AtomMaterializer materializer, AtomEntry entry, Type expectedEntryType) at System.Data.Services.Client.AtomMaterializerInvoker.DirectMaterializePlan(Object materializer, Object entry, Type expectedEntryType) at System.Data.Services.Client.ProjectionPlan.Run(AtomMaterializer materializer, AtomEntry entry, Type expectedType) at System.Data.Services.Client.AtomMaterializer.Read() at System.Data.Services.Client.MaterializeAtom.MoveNextInternal() at System.Data.Services.Client.MaterializeAtom.MoveNext() at System.Linq.Enumerable.d_b11.MoveNext() at System.Data.Services.Client.DataServiceCollection1.InternalLoadCollection(IEnumerable1 items) at System.Data.Services.Client.DataServiceCollection1.StartTracking(DataServiceContext context, IEnumerable1 items, String entitySet, Func2 entityChanged, Func2 collectionChanged) at System.Data.Services.Client.DataServiceCollection1..ctor(DataServiceContext context, IEnumerable1 items, TrackingMode trackingMode, String entitySetName, Func2 entityChangedCallback, Func2 collectionChangedCallback) at System.Data.Services.Client.DataServiceCollection1..ctor(IEnumerable1 items) at Phinli.Dashboard.Silverlight.Helpers.DataHelper.<>c__DisplayClass44.<>c__DisplayClass46.<LoadAllPagesExpandAll>b__43() InnerException: System.InvalidOperationException Message=An item could not be added to the collection. When items in a DataServiceCollection are tracked by the DataServiceContext, new items cannot be added before items have been loaded into the collection. StackTrace: at System.Data.Services.Client.DataServiceCollection1.InsertItem(Int32 index, T item) at System.Collections.ObjectModel.Collection`1.Add(T item) InnerException: Thanks for any help!

  Read the article

• Loop through values and display in a pdf file

  - by chupinette

  Hello all! i have written the following code: As you can see there is a for loop to go through some values and display them in the generated pdf. The problem is that all the values are being written at the same place. I have tried to insert a new line but it does not seem to work. Can anyone suggest me how i can do it? Do i need to write a nested for loop so that it the values at different y positions? $pdf = pdf_new(); // open a file pdf_open_file($pdf, "C:/xampp/htdocs/final/6.pdf"); pdf_set_info($pdf, "Author", ""); pdf_set_info($pdf, "Title", ""); pdf_set_info($pdf, "Creator", ""); pdf_set_info($pdf, "Subject", ""); // start a new page (A4) $x = 595; $y = 842; pdf_begin_page($pdf, $x, $y); pdf_set_parameter($pdf, 'FontOutline', 'Arial=c:\windows\fonts\arial.ttf'); pdf_setcolor($pdf, "stroke", "rgb", 0, 0, 0, 1.0); // get and use a font object $font = pdf_findfont($pdf, "Arial", "host", 1); pdf_setfont($pdf, $font, 10); // print text pdf_show_xy($pdf, "QUOTATION" , 250, $y - 60); pdf_show_xy($pdf, "Customer Name: " . $this->customer_details['first_name'] . " " . $this->customer_details['last_name'], 50, 770); pdf_show_xy($pdf, "Date: " . date("F j, Y, g:i a"), 50, 750); pdf_show_xy($pdf, "Number of items requested: " . $count_items_req, 50, 730); pdf_show_xy($pdf, "Number of items found: " . $count_items_found, 50, 710); // add an image under the text $image = $image = PDF_load_image($pdf, "png", "C:/xampp/htdocs/final/images/footer_logo.png", ""); PDF_fit_image($pdf, $image, 50, 785, ""); pdf_moveto($pdf, 20, 780); pdf_lineto($pdf, 575, 780); pdf_stroke($pdf); // draw another line near the bottom of the page pdf_moveto($pdf, 20, 50); pdf_lineto($pdf, 575, 50); pdf_stroke($pdf); //Draw the lines $offset = 184; $i = 0; pdf_moveto($pdf, 20, $y - 160); pdf_lineto($pdf, $x - 20, $y - 160); pdf_stroke($pdf); pdf_moveto($pdf, $x - 400, $y - 160); pdf_lineto($pdf, $x - 400, 80); pdf_stroke($pdf); pdf_moveto($pdf, $x - 200, $y - 160); pdf_lineto($pdf, $x - 200, 80); pdf_stroke($pdf); pdf_moveto($pdf, $x - 100, $y - 160); pdf_lineto($pdf, $x - 100, 80); pdf_stroke($pdf); pdf_continue_text($pdf, ''); pdf_continue_text($pdf, ''); pdf_show_xy($pdf, "Searched Item", 70, $y - 150); pdf_show_xy($pdf, "Searched Item", 70, $y - 150); pdf_show_xy($pdf, "Item name", 240, $y - 150); pdf_show_xy($pdf, "Item name", 240, $y - 150); pdf_show_xy($pdf, "Price", $x - 180, $y - 150); pdf_show_xy($pdf, "Price", $x - 180, $y - 150); pdf_show_xy($pdf, "Discounted Price", $x - 100, $y - 150); pdf_show_xy($pdf, "Discounted Price", $x - 100, $y - 150); for ($i = 0; $i < count($this->quotation_details); $i++) { pdf_show_xy($pdf, $this->quotation_details[$i]['name_searched'] , 70, $y - 500); } // and write some text under it pdf_show_xy($pdf, "", 250, 35); // end page pdf_end_page($pdf); // close and save file pdf_close($pdf);

  Read the article

• Edit and render RichText

  - by OregonGhost

  We have an application (a custom network management tool for building automation) that supports printing labels that you can cut out and insert into the devices' front displays. In earlier versions of the tool (not developed in my company), the application just pushed the strings into an Excel file that the field technician could then manipulate (like formatting text). We didn't do this in the new version because it was hard (impossible) to keep the Excel file in sync, and to avoid a binding to an external application (let alone different versions of Excel). We're using PDFSharp for rendering the labels. It has a System.Drawing-like interface, but can output to a System.Drawing.Graphics (screen / printer) as well as to a PDF file, which is a requirement. Later, basic formatting was introduced like Font Family, Style, Size, Color which would apply to one label (i.e. to exactly one string). Now the customer wants to be able to apply these formats to single characters in a string. I think the easiest way would be to support a subset of RichText. It's not as easy as I thought though. Currently the editor just displays a TextBox for the label you want to edit, with the font set to the label's font. I thought I'd just replace it with RichTextBox, and update the formatting buttons to use the RichTextBox formatting properties. Fairly easy. However, I need to draw the text. I know you can get the RichTextBox to draw to a HDC or System.Drawing.Graphics - but as already said, I need it to use PDFSharp. Rendering to bitmaps is not an option, since the PDF must not be huge, and it's a lot of labels. Unfortunately I couldn't get the RichTextBox to tell me the layout of the text - I'm fine with doing the actual rendering by hand, as long as I know where to draw what. This is the first question: How can I get the properly layouted metrics of the rich text out of a RichTextBox? Or is there any way to convert the rich text to a vector graphics format that can be easily drawn manually? I know about NRTFTree which can be used to parse and manipulate RichText. The documentation is bad (actually I don't know, it's Spanish), but I think I can get it to work. As far as I understood, it won't provide layouting as well. Because of this, I think I'll have to write a custom edit control (remember, it's basically just one or two line labels with basic RTF formatting, not a full-fledged edit control - more like editing a textbox in PowerPoint) and write custom text layout logic that used PDFSharp rather than System.Drawing for drawing. Is there any existing, even if partial, solution available, either for the editing or for doing the layout manually (or both)? Or is there an entirely different approach I'm just not seeing? Bonus points if exporting the label texts as RTF into a CSV file, and then importing in Excel retains the formatting. For the editing part, I need it to work in Windows Forms. Other than that it's not Windows-Forms-related, I think.

  Read the article

• More information wanted on error: CREATE ASSEMBLY for assembly failed because assembly failed verif

  - by turnip.cyberveggie

  I have a small application that uses SQL Server 2005 Express with CLR stored procedures. It has been successfully installed and runs on many computers running XP and Vista. To create the assembly the following SQL is executed (names changed to protect the innocent): CREATE ASSEMBLY myAssemblyName FROM 'c:\pathtoAssembly\myAssembly.dll' On one computer (a test machine that reflects other computers targeted for installation) that is running Vista and has some very aggressive security policy restrictions I receive the following error: << Start Error Message Msg 6218, Level 16, State 2, Server domain\servername, Line 2 CREATE ASSEMBLY for assembly 'myAssembly' failed because assembly 'myAssembly' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message [ : myProcSupport.Axis::Proc1][mdToken=0x6000004] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc2][mdToken=0x6000005] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc3][mdToken=0x6000006] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::.ctor][mdToken=0x600000a] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc4][mdToken=0x6000001] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc5][mdToken=0x6000002] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc6][mdToken=0x6000007] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc7][mdToken=0x6000008] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc8][mdToken=0x6000009] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc8][mdToken=0x600000b] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation. [ : myProcSupport.Axis::Proc9][mdToken=0x600000c] [HRESULT 0x8007000E] - Not enough storage is available to complete this operation.... << End Error Message The C# DLL is defined as “Safe” as it only uses data contained in the database. The DLL is not normally signed, but I provided a signed version to test and received the same results. The installation is being done by someone else, and I don’t have access to the box, but they are executing scripts that I provided and work on other computers. I have tried to find information about this error beyond what the results of the script provide, but I haven’t found anything helpful. The person executing the script to create the assembly is logged in with an Admin account, is running CMD as admin, is connecting to the DB via Windows Authentication, has been added to the dbo_owner role, and added to the server role SysAdmin with the hopes that it is a permissions issue. This hasn't changed anything. Do I need to configure SQL Server 2005 Express differently for this environment? Is this error logged anywhere other than just the output from SQLCMD? What could cause this error? Could Vista security policies cause this? I don’t have access to the computer (the customer is doing the testing) so I can’t examine the box myself. TIA

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >