Search Results

Search found 7756 results on 311 pages for '64'.

Page 29/311 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • 2560 x 1600 screen resolution not available when a second monitor is attached.

    - by sgmoore
    I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

    Read the article

  • Debian x86_64 + Nginx + PHP5-FPM optimization

    - by Olal'a
    I used to have a VPS (512MB) from Linode and I was running nginx + php5-fpm (which comes with php5.3.3) on Debian Lenny (i686). The total memory usage was about 90-100MB. Now I have another VPS (different hosting company) and I also run nginx + php5-fpm on Debian Lenny (x86_64). The system is 64-bit, so the memory usage is higher now, about 210-230MB, which I think is too much. Here is my php5-fpm.conf: pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 300 That's what top command tells me: top - 15:36:58 up 3 days, 16:05, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 469628k used, 62660k free, 28760k buffers Swap: 1048568k total, 408k used, 1048160k free, 210060k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22806 www-data 20 0 178m 67m 31m S 1 13.1 0:05.02 php5-fpm 8980 mysql 20 0 241m 55m 7384 S 0 10.6 2:42.42 mysqld 22807 www-data 20 0 162m 43m 22m S 0 8.3 0:04.84 php5-fpm 22808 www-data 20 0 160m 41m 23m S 0 8.0 0:04.68 php5-fpm 25102 www-data 20 0 151m 30m 21m S 0 5.9 0:00.80 php5-fpm 10849 root 20 0 44100 8352 1808 S 0 1.6 0:03.16 munin-node 22805 root 20 0 145m 4712 1472 S 0 0.9 0:00.16 php5-fpm 21859 root 20 0 66168 3248 2540 S 1 0.6 0:00.02 sshd 21863 root 20 0 66028 3188 2548 S 0 0.6 0:00.06 sshd 3956 www-data 20 0 31756 3052 928 S 0 0.6 0:06.42 nginx 3954 www-data 20 0 31712 3036 928 S 0 0.6 0:06.74 nginx 3951 www-data 20 0 31712 3008 928 S 0 0.6 0:06.42 nginx 3957 www-data 20 0 31688 2992 928 S 0 0.6 0:06.56 nginx 3950 www-data 20 0 31676 2980 928 S 0 0.6 0:06.72 nginx 3955 www-data 20 0 31552 2896 928 S 0 0.5 0:06.56 nginx 3953 www-data 20 0 31552 2888 928 S 0 0.5 0:06.42 nginx 3952 www-data 20 0 31544 2880 928 S 0 0.5 0:06.60 nginx So, the question is there any way to use less memory? Btw, I have 16 cores and it would be nice to make use of them...

    Read the article

  • Unable to sync iPod Touch with my PC

    - by alex
    I'm trying to sync a first gen iPod Touch to my PC running Windows 7 64 bit. The problem is that whenever I connect the iPod, iTunes completely freezes (if I start iTunes after connecting the iPod it will simply hang until it's physically disconnected from the PC). I reinstalled iTunes thinking that it had been corrupted, but without any luck. I've had this problem with all the latest versions of iTunes. I've also tried using MediaMonkey and DoubleTwist. None of these apps see the iPod as being connected; DoubleTwist also freezes, just like iTunes. The really strange thing is that I was able to sync the iPod with this PC a while back, but I now seem to have lost that ability. I don't know what changed. Windows detects the device every time it's plugged in (I can see it in Device Manager and I can browse all photos on iPod as if it were a camera). Also, I can sync it to iTunes on Mac OS X without any major problems.

    Read the article

  • Debian x86_64 + Nginx + PHP5-FPM optimization

    - by user55859
    I used to have a VPS (512MB) from Linode and I was running nginx + php5-fpm (which comes with php5.3.3) on Debian Lenny (i686). The total memory usage was about 90-100MB. Now I have another VPS (different hosting company) and I also run nginx + php5-fpm on Debian Lenny (x86_64). The system is 64-bit, so the memory usage is higher now, about 210-230MB, which I think is too much. Here is my php5-fpm.conf: pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 300 That's what top command tells me: top - 15:36:58 up 3 days, 16:05, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.9%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 469628k used, 62660k free, 28760k buffers Swap: 1048568k total, 408k used, 1048160k free, 210060k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 22806 www-data 20 0 178m 67m 31m S 1 13.1 0:05.02 php5-fpm 8980 mysql 20 0 241m 55m 7384 S 0 10.6 2:42.42 mysqld 22807 www-data 20 0 162m 43m 22m S 0 8.3 0:04.84 php5-fpm 22808 www-data 20 0 160m 41m 23m S 0 8.0 0:04.68 php5-fpm 25102 www-data 20 0 151m 30m 21m S 0 5.9 0:00.80 php5-fpm 10849 root 20 0 44100 8352 1808 S 0 1.6 0:03.16 munin-node 22805 root 20 0 145m 4712 1472 S 0 0.9 0:00.16 php5-fpm 21859 root 20 0 66168 3248 2540 S 1 0.6 0:00.02 sshd 21863 root 20 0 66028 3188 2548 S 0 0.6 0:00.06 sshd 3956 www-data 20 0 31756 3052 928 S 0 0.6 0:06.42 nginx 3954 www-data 20 0 31712 3036 928 S 0 0.6 0:06.74 nginx 3951 www-data 20 0 31712 3008 928 S 0 0.6 0:06.42 nginx 3957 www-data 20 0 31688 2992 928 S 0 0.6 0:06.56 nginx 3950 www-data 20 0 31676 2980 928 S 0 0.6 0:06.72 nginx 3955 www-data 20 0 31552 2896 928 S 0 0.5 0:06.56 nginx 3953 www-data 20 0 31552 2888 928 S 0 0.5 0:06.42 nginx 3952 www-data 20 0 31544 2880 928 S 0 0.5 0:06.60 nginx So, the question is there any way to use less memory? Btw, I have 16 cores and it would be nice to make use of them...

    Read the article

  • Windows 7 loses correct time zone upon reboot

    - by Android Eve
    I have a standard PC running Windows 7 Ultimate (64-bit). For some reason, it refuses to keep the correct time zone (the BIOS battery is OK) when restarted. Note (1): The Time zone is correct. The "Internet Time" tab also shows "this computer is set to automatically synchronize with 'time.windows.com'. When I click the 'Change settings...' button, the 'Synchronize with an Internet time server' checkbox is checked. Still, upon reboot, the time is skewed by 6 hours... and doesn't correct itself even after waiting hours for this "automatically synchronize" to occur. Note (2): The BIOS time is set to local (i.e. not UTC). When I restart Windows 7 without booting to the other OS installed in dual-boot config (Ubuntu Linux), it seems to correctly remember the time. This may explain immediate time upon reboot, but it doesn't explain why Windows 7 won't automatically 'Synchronize with an Internet time server' even after an hour. Why is this happening and how do I correct this?

    Read the article

  • Alternative Bluetooth Stacks for Windows 7 64bit

    - by Martin
    I have a notebook with an inbuilt Broadcom BCM2046 bluetooth adapter and several bluetooth HID-devices (mice, keyboards etc.) The operating system is Windows 7 64 bit Professional. The HID-devices all work perfectly with other computers, but on the system mentionend above, problems with some power-saving features inside the HID-devices occur (see eg. Amazon reviews for Microsoft Mobile Keyboard 6000 not waking up). I have tried the bluetooth drivers supplied by Windows update and the latest Broadcom drivers directly from the Broadcom updater software. The problems persist (I can rule out any further configuration issues or alternative device drivers, I have tried every possibility). I have tried a trial version of the BlueSoleil Bluetooth stack and it solved the wake-up problem. However the BlueSoleil stack causes some other problems, is relatively expensive and I would prefer not to use it. My question: are there any other alternative bluetooth stacks availible for Windows 7 64bit? To my knowledge there used to be Toshiba Bluetooth stack for non-Toshiba hardware, but the older versions I have found on the internet do not install, they do not seem to recognize the bluetooth hardware when installing the driver.

    Read the article

  • Installed Bunch of New Fonts on Windows 7 - Now None Show Up and System Lags

    - by Josh Stodola
    So I went to install about 5,000 fonts on my Windows 7 64-bit machine. It was slow to install them, and I had to leave. I came back and my PC was shut down, and I had to go through the Windows recovery BS when I powered it on. Now my computer runs EXTREMELY slow and any program that has a font menu locks up my whole machine (nothing in Microsoft Office works). When I go to "Fonts" in the control panel, it says 0 items. I went through all of the font settings trying to get them to appear. Nothing helps. I tried to bring up the Character Map and that froze up my machine too. How can I fix this? If I do not get this issue resolved soon, I am wiping this drive and going back to XP (and probably never purchasing another version of Windows again). I never had any issues with XP and have had nothing but performance problems when switching to Windows 7. My quad-core intel extreme with 8GB of RAM should never flinch with the kind of work that I do, and something simple like playing a song off an external HD takes up to five seconds on Windows 7. Unbelievable that I had to pay for this crap!

    Read the article

  • Windows 7 System File Checker (sfc) not working

    - by Andrew
    I have a strange problem with Windows 7 RTM. I'm running Ultimate 64-bit edition. Whenever I run sfc /scannow I get this error: Windows Resource Protection could not start the repair service. My research so far has told me that I need to set the Windows Module Installer and Windows Installer services' startup types to Manual. They already were, so I manually started those services and tried again. No luck. I've even booted into my Windows 7 repair disc and tried running sfc /scannow from that. All I get is this: A repair operation is already pending. Restart and try again. History: I'm trying to run sfc because I am unable to open any images in Windows Photo Viewer. Whenever I try, I get the error "Class not registered." I believe the problem started after I installed Gladinet, but I can't be sure. I've uninstalled Gladinet, but the problem remains. System Restore was disabled (yes, I know I'm stupid - you don't have to remind me). Please help. Thanks.

    Read the article

  • How I can fix the "Display Driver has stopped responding and has recovered"?

    - by Vitor Rangel
    I'm using a GeForce GTX 580, with Windows 7 64-bit. The driver version of the GTX is 301.42. The problem happens after a few minutes, when I'm playing specifc games. It won't happen in all games - And I don't have any idea why these games doesn't work. The games that doesn't work: Battlefield 3, Civilization V, Sniper Elite V2. The games that work: Mass Effect 3, Crysis 2, Team Fortress 2, Left 4 Dead 2, Skyrim, L.A. Noire. As you can see, it's not a problem of "The games that demand more stop working". I've tryed updating the driver of the graphics-card, the bios of the motherboard, even formated my computer (It was needing it) and instaled every driver in the last version possible. This problem happens since I bought my graphics-card, 6 months ago. After a few minutes, from 10 to 20, the pixels in the monitor become strange, with random colors and effects, like it was broken. Then, everything goes black, and the message appears "Display Driver has stopped responding and has recovered". After that, I need to close the game and start again. I am not overclocking, and my temperature never goes higher than 70ºC.

    Read the article

  • Does using a hexacore CPU make sense?

    - by Exa
    I'm currently planning to upgrade my computer system and I want to exchange CPU, board and RAM. I already had a look at some hexacore-CPUs from AMD and would like to know if it makes any sense to use such a CPU with six cores. Is there any software which really uses six cores? Especially in gaming? I'm using this PC mostly for gaming and from time to time for developing. I know that on the dual-core system (2 x 3GHz) I currently use, Visual Studio creates two instances of the compiler, one for each core. Would there be six instances of the compiler on a hexacore system for super fast compiling? Is there any software that uses six cores? Would running two applications cause the usage of more CPUs? (For example two CPUs for a game you're playing while two other CPUs are used for compiling at the same time) I hope someone can point out the benefits of a hexacore system. The OS would be Windows 7 64 Bit and I use the PC for gaming most of the time. (Crysis 2, CoD, stuff like that)

    Read the article

  • Windows 7 hangs with 100% disk activity but only when online

    - by jeremy
    I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

    Read the article

  • Installing ionCube on Windows 2008 64bit

    - by JoJo
    I've been trying to install ionCube onto my server but have not been having a lot of luck! My server is: Windows 2008 64bit PHP 5.3.14 Thread Safe disabled running as FastCGI In my PHP.ini I have : zend_extension="C:\Program Files (x86)\PHP\ext\ioncube_loader_win_5.2.dll" The path is correct. The DLL is from the x86 NONTS VC9 version of ionCube and PHP is using the MSVC9 (Visual C++ 2008) compiler though I have also tried using the x86 NONTS VC6 version of ionCube. I'm not getting any error but I'm also not getting ionCube when using phpinfo(): This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies Apart from the mail application pools I have also set all the applications in the application pool in IIS7 to use 32bit mode. I don't know if FastCGI is running under 64 or 32 bit mode nor how to switch it or whether it would make a difference? I know it can be a problem installing ionCube onto 64bit Windows but I have also come across threads whereby other people have also [somehow] managed to get it working but even though I seem to be doing the same as them I still can't get it working.

    Read the article

  • why would resetting the Netgear N300 router fix my Win 7 laptop's slow wifi?

    - by rjnagle
    In the past day the wifi download speeds of my Win 7 HP 64 bit laptop have slowed considerably. I am trying to troubleshoot the problem and to figure out whether it's hardware related (i.e., is the Intel(R) Centrino(R) Wireless-N 2230 the problem?) or router related. I have a Netgear N300 router connected to my modem. I'm using Speedtest to measure my speed. First, during my problem state, my ipad can download and upload at normal speeds. It's only my Win 7 laptop which is having problems. Because my ipad downloads at normal speeds, that would tell me that the problem is specific to the laptop (either HW or SW). But when I restarted my Netgear router, the laptop wifi problems disappeared. That just doesn't make sense. If we know that one device can connect properly to the router, why would a laptop have problems? What are some possible reasons why this might happen? Also, during my problem state, I noticed that on my laptop upload speeds were faster than my download speeds. Anybody have a guess about what might cause upload speeds on one device to be faster than another? Is there any actions i could take (or options to enable) so this problem won't occur. (I initially thought my problem might be software related or memory related -- Norton AV or browser plugins. But even after I disabled everything and made sure memory footprint was minimal, the slowdown was still occurring -- and it solved itself altogether when the router was reset).

    Read the article

  • How can I get write permission for the Web (Inetpub) directory on a new Win 7 machine?

    - by marcipollo
    I mirror my Web site on my laptop, and am trying to move the mirror site to a new laptop. I copied the files to the Inetpub directory, and can view them perfectly, but they are read-only (the check-mark is grey, not black), and I cannot change the permission. When I un-check the read-only attribute on the Inetpub directory, and click "apply" it displays a dialog box stating that I need administrative permission to change the attributes. (I am logged in as an administrator). When I click "continue," it pops up another dialog box saying access is denied to the attributes of the file: c:\inetpub\custerr\en-us\500-100.asp That dialog box has an "ignore" button, and if I click that, it appears to work through the directory tree setting the permissions. It leaves all of the files (leafs) set to "read-write," but the directories remain "read only." I am using 64-bit Windows 7. I stopped the IIS service while doing all of this. Might it have something to do with the fact that I copied the files from a different machine in the workgroup (my old laptop)?

    Read the article

  • Installed Memory (RAM): 8GB (4GB Useable)

    - by Mike Bannister
    I have 4X 2GB RAM sticks installed, Windows 7 Ultimate x64 shows "Installed Memory (RAM): 8GB (4GB Useable)" in the system information. The motherboard says it supports up to 16GB of memory. I had Windows XP x64 and I'm pretty sure it was able to use all 8Gigs of memory. I've just formatted and am not burning through 4GB for sure. *The BIOS only show 4096MB while booting. I was only able to find one option relating to memory mapping and it took it from 4Gigs to 3 and change. CPU-Z shows all 4 sticks as 2048MB I went in to msconfig and checked the limits, they are not set. I tried resetting the CPU and RAM sticks 3 times, the CPU has no pins to be bent (flat contacts, I5) I rearranged all the RAM. I have separate video memory from the system memory. I have a 64 bit OS (I am 100% certain) Hardware: Memory: Four Corsair XMS3 TW3X4G1333C9AG Motherboard: Asus P7P55D Pro CPU: Intel Core i5-760 BX80605I5760 Graphics: Two ZOTAC ZT-50401-10L GeForce GTX 550 Ti If anyone has new ideas or knows the exact setting in the bios, it would be greatly appreciated.

    Read the article

  • VMworkstation Windows 7 vm from physical partition?

    - by rich
    Hi All, i have a machine with 2 disks. my secondary drive has two partitions, one of which is a windows 7 64 boot partition. I have VM workstation and i would like to make a VM from the physical partition (described above). Ideally this would boot from the live disk, but if i can make a vmdk from the two partitions on the secondary drive that would be fine. 1 issue is the drive is 140gig raptor of which the two partitions i want are 40g and 30g partitions. the rest of the space is unallocated. So if i make a vmdk i really need it to be fixed at say 80 gig. I have converter but i don't understand how i can make the vmdk using this... specs Drive 1: this drive is a 120 SSD, running the host OS (Windows 7 64bit) - i've got 95 gigs free on this Drive 2: 140 gig raptor, partition 1 40g is also a windows 7 64bit install, partition 2 is 35 gig with program files folder on it.. sorta of needed to get the vm to work. There is 65gig unallocated on this disk. Drive 1 will host drive 2 as a VM.. my hope.

    Read the article

  • Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

    - by npmj
    I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

    Read the article

  • Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

    - by npmj
    I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

    Read the article

  • Checkpoint VPN-1 R60 and Windows 7 64 Bit Client

    - by Mohit
    As per my knowledge of checkpoint VPN-1. My company is using checkpoint VPN-1 R 60 ( I guess as I dont know how to check server version) Firewall(VPN Server). Now the problem is that I installed Windows 7 64 bit. But, after my research I found that there are not even one client (SecuRemote/SecuClient) for Win7 64 bit, when Firewall or server is R60. I thought of some open source solutions. Can you guys please suggest me some with the configuration required. As of now, I know the IP of the server. I know my username and password using which I connect and that is not my domain password. that i can confirm to you guys. I am not a network guy. I am more of a developer. But, I need some help in this.So, let me know if I can provide you more details. Please please i need urgent help on this.

    Read the article

  • RPM issues after signing JDK 1.6 64-bit

    - by organicveggie
    I'm trying to sign the Java JDK 1.6u21 64-bit RPM on CentOS 5.5 for use with Spacewalk and I'm running into problems. It seems to sign okay, but then when I check the signature it seems to be missing the key I just used to sign it. Yet RPM shows the key in it's list... # rpm --addsign jdk-6u21-linux-amd64.rpm Enter pass phrase: Pass phrase is good. jdk-6u21-linux-amd64.rpm: gpg: WARNING: standard input reopened gpg: WARNING: standard input reopened # rpm --checksig -v jdk-6u21-linux-amd64.rpm jdk-6u21-linux-amd64.rpm: Header V3 DSA signature: NOKEY, key ID ecfd98a5 MD5 digest: OK (650e0961e20d4a44169b68e8f4a1691b) V3 DSA signature: OK, key ID ecfd98a5 Yet I have the key imported (edited for privacy): # rpm -qa gpg-pubkey* |grep ecfd98a5 gpg-pubkey-ecfd98a5-4caa4a4c # rpm -qi gpg-pubkey-ecfd98a5-4caa4a4c Name : gpg-pubkey Relocations: (not relocatable) Version : ecfd98a5 Vendor: (none) Release : 4caa4a4c Build Date: Mon 04 Oct 2010 10:20:49 PM CDT Install Date: Mon 04 Oct 2010 10:20:49 PM CDT Build Host: localhost Group : Public Keys Source RPM: (none) Size : 0 License: pubkey Signature : (none) Summary : gpg(FirstName LastName <[email protected]>) Description : -----BEGIN PGP PUBLIC KEY BLOCK----- Version: rpm-4.4.2.3 (NSS-3) ...key goes here... =gKjN-----END PGP PUBLIC KEY BLOCK----- And I'm definitely running a 64-bit version of CentOS: # uname -a Linux spacewalk.mycompany.corp 2.6.18-194.11.4.el5 #1 SMP Tue Sep 21 05:04:09 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux Without a valid signature, Spacewalk refuses to install the RPM unless I completely disable signature checking. I have tried this with two different keys and two different users on the same machine without any success. Any bright ideas?

    Read the article

  • Checkpoint VPN-1 R60 and Windows 7 64 Bit Client

    - by Mohit
    Hi All, As per my knowledge of checkpoint VPN-1. My company is using checkpoint VPN-1 R 60 ( I guess as I dont know how to check server version) Firewall(VPN Server). Now the problem is that I installed Windows 7 64 bit. But, after my research I found that there are not even one client (SecuRemote/SecuClient) for Win7 64 bit, when Firewall or server is R60. I thought of some open source solutions. Can you guys please suggest me some with the configuration required. As of now, I know the IP of the server. I know my username and password using which I connect and that is not my domain password. that i can confirm to you guys. I am not a network guy. I am more of a developer. But, I need some help in this.So, let me know if I can provide you more details. Please please i need urgent help on this.

    Read the article

  • How to know whether mongodb is running on 64 bit mode or 32 bit mode

    - by Jim Thio
    My programmer install mongodb. Then somehow it doesn't work. I run C:\mongod\bin>mongod mongod --help for help and startup options Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 warning: 32-bit servers don't have journaling enabled by def ault. Please use --journal if you want durability. Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 [initandlisten] MongoDB starting : pid=3800 port=27017 dbpat h=/data/db 32-bit host=haryantoi5 Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sat Aug 11 22:57:50 [initandlisten] ** see http://blog.mongodb.org/post/13 7788967/32-bit-limitations Sat Aug 11 22:57:50 [initandlisten] ** with --journal, the limit is lower Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] db version v2.0.7-rc1, pdfile version 4.5 Sat Aug 11 22:57:50 [initandlisten] git version: 9efe4cce272373b52b96de1309c1fbf 0c984305f Sat Aug 11 22:57:50 [initandlisten] build info: windows sys.getwindowsversion(ma jor=6, minor=0, build=6002, platform=2, service_pack='Service Pack 2') BOOST_LIB _VERSION=1_42 Sat Aug 11 22:57:50 [initandlisten] options: {} ************** Unclean shutdown detected. Please visit http://dochub.mongodb.org/core/repair for recovery instructions. ************* Sat Aug 11 22:57:50 [initandlisten] exception in initAndListen: 12596 old lock f ile, terminating Sat Aug 11 22:57:50 dbexit: Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close listening sockets.. . Sat Aug 11 22:57:50 [initandlisten] shutdown: going to flush diaglog... Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close sockets... Sat Aug 11 22:57:50 [initandlisten] shutdown: waiting for fs preallocator... Sat Aug 11 22:57:50 [initandlisten] shutdown: closing all files... Sat Aug 11 22:57:50 [initandlisten] closeAllFiles() finished Sat Aug 11 22:57:50 dbexit: really exiting now It seems that mongod is running on 32 bit. I have a 64 bit computer and I want to run mongodb in 64 bit enviroment. How do I do so?

    Read the article

  • Host system resets (crashes) when using VMWare or VirtualBox and 64-bit guest systems

    - by sinni800
    I have been trying to install virtual systems on VMWare for a while now and encountered strange behaviour from my PC. The behaviour is as follows: On "automatic" virtualization mode it either outputs a cryptic error message (can MAYBE give later, if I can reproduce) right on startup (before even the BIOS) or it resets the complete HOST system (blackscreen, bios...) If I install a Windows XP on it it works well on "binary translation" mode. If I try installing Linux on it, in "binary translation" mode it crashes 1 or 2 seconds after I hit enter on the GRUB selection screen (after the first page of kernel messages rolled in) Using VirtualBox it crashes right in the BIOS. It gave me a Bluescreen though! 0x00000101: CLOCK_WATCHDOG_TIMEOUT: a clock interrupt was not received on a secondary processor within the allocated time interval NEWS: I tried VirtualBox again and it did not completely crash the computer this time. It gave me a critical error and a log file: http://pastebin.com/yKZSDs91 In conclusion, it will crash instantly if VT-x is activated. If not, it seemingly only crashed if I try to install something with 64 bits. Another update: Yes, it ONLY crashes when the guest is 64 bit! What I tried: Reinstalling Windows (my Windows installation was quite broken so it seemed natural. Didn't work though.) New BIOS What I am certain of: Virtualization extensions are activated in the BIOS What my computer specs are: ASUS P8P67 LE mainboard, newest BIOS/EFI firmware Intel Core i5 2500k Ati Radeon HD 5770 16 GB Corsair 1333mhz DDR3 RAM, 4 X 4 GB

    Read the article

  • Installing a clean Python 2.6 on SuSE (SLES) 11 using system-wide libraries

    - by optilude
    Hi, I've spent most of the day on this, and it is driving me absolutely insane. On all other Unixes I've used, this is a walk in the park, but SLES 11 has me dumbfounded. I need to build Zope on SLES 11 64 bit: Linux <name> 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux I first tried to just use the YaST-installed Python 2.6. I've also installed python-devel, libjpeg-devel, readline-devel, libopenssl-devel, libz2-devel, zlib-devel, and libgcrypt-devel. The global python2.6 has a lot of cruft in it, and seems to execute stuff in /etc/pythonstart when I use it, which doesn't help. However, the error I get is this: Getting distribution for 'Zope2==2.12.3'. src/AccessControl/cAccessControl.c:596: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:598: warning: ‘intargfunc’ is deprecated src/AccessControl/cAccessControl.c:598: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:599: warning: ‘intargfunc’ is deprecated src/AccessControl/cAccessControl.c:599: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:600: warning: ‘intintargfunc’ is deprecated src/AccessControl/cAccessControl.c:600: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:601: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:602: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:606: warning: ‘intargfunc’ is deprecated src/AccessControl/cAccessControl.c:606: warning: initialization from incompatible pointer type /usr/lib64/gcc/x86_64-suse-linux/4.3/../../../../x86_64-suse-linux/bin/ld: skipping incompatible /usr/lib/libpython2.6.so when searching for -lpython2.6 /usr/lib64/gcc/x86_64-suse-linux/4.3/../../../../x86_64-suse-linux/bin/ld: cannot find -lpython2.6 collect2: ld returned 1 exit status error: Setup script exited with error: command 'gcc' failed with exit status 1 An error occured when trying to install Zope2 2.12.3. Look above this message for any errors that were output by easy_install. I don't know what "incompatible" is referring to here; my guess would be the hardware architecture, but I'm not sure what's incompatible with what in the statement above. I've had problems with system-installed Pythons before, so I tried to compile my own (hence the list of -devel packages above), downloading the Python 2.6 tarball and running: ./configure --disable-tk --prefix=${HOME}/python make make install This installs, but it seems to be unable to find any system-wide libraries. Here's a sample interpreter session: Python 2.6.5 (r265:79063, Mar 29 2010, 17:04:12) [GCC 4.3.2 [gcc-4_3-branch revision 141291]] on linux2 Type "help", "copyright", "credits" or "license" for more information. Traceback (most recent call last): File "/etc/pythonstart", line 7, in <module> import readline ImportError: No module named readline >>> from hashlib import md5 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/home/osc/python-2.6/lib/python2.6/hashlib.py", line 136, in <module> md5 = __get_builtin_constructor('md5') File "/home/osc/python-2.6/lib/python2.6/hashlib.py", line 63, in __get_builtin_constructor import _md5 ImportError: No module named _md5 Both readline and hashlib (via libgrypt) should be installed, and the relevant -devel packages are also installed. On Ubuntu or OS X, this works just fine. On SuSE, no luck. Any help greatly appreciated! Martin

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >