Search Results

Search found 1882 results on 76 pages for 'gnu'.

Page 29/76 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

  • less maximum buffer size?

    - by Tyzoid
    I was messing around with my system and found a novel way to use up memory, but it seems that the less command only holds a limited amount of data before stopping/killing the command. To test, run (careful! uses lots of system memory very fast!) $ cat /dev/zero | less From my testing, it looks like the command is killed after less reaches 2.5 gigabytes of memory, but I can't find anything in the man page that suggests that it would limit it in such a way. In addition, I couldn't find any documentation via the google on the subject. Any light to this quite surprising discovery would be great! System Information: Quad core intel i7, 8gb ram. $ uname -a Linux Tyler-Work 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux $ less --version less 458 (GNU regular expressions) Copyright (C) 1984-2012 Mark Nudelman less comes with NO WARRANTY, to the extent permitted by law. For information about the terms of redistribution, see the file named README in the less distribution. Homepage: http://www.greenwoodsoftware.com/less $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty

    Read the article

  • apt unable to install particular version of package (but gives no error)

    - by Arc2009
    I'd like to install particular version of libstd++6 with following command: # apt-get install libstdc++6=4.9.0-8 -V Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libstdc++6 (4.8.2-16) 0 upgraded, 0 newly installed, 0 to remove and 216 not upgraded. It gives no error, but apt keeps version that was already installed. And also it refers to this package as "extra". There's no apt preferences set in /etc/apt/preferences.d. And the desirable version is definetely available through our local mirror. (If I try to run "apt-get download libstdc++6=4.9.0-8" it will download exactly desirable version.) System info: # cat /etc/issue.net "Debian GNU/Linux jessie/sid" # uname -a Linux www27 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux. # dpkg -l |egrep -i "apt|dpkg" ii apt 0.9.16.1 amd64 commandline package manager ii dpkg 1.17.6 amd64 Debian package management system Any suggestions?

    Read the article

  • What steps can you take to ensure sane build environments when compiling software?

    - by Chris Adams
    Hi guys, I've been stuck with a compilation problem when building a standardised virtual machine on CentOS 5.4, and I'm in the dark here as to a) why this error is occurring, and b) how to fix it, and in the hope that someone else stumbles across this problem too, I'm hoping someone can help me find the solution here. I'm getting a configure: error: newly created file is older than distributed files! error when trying to compile Ruby Enterprise like below when I try to run the installer, and the solutions offered to on the forums (of checking the tine, and touching the files to update the time associated with them) don't seem to be helping here. What steps can I take to work out what the cause of this problem? [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo ./installer Welcome to the Ruby Enterprise Edition installer This installer will help you install Ruby Enterprise Edition 1.8.7-2009.10. Don't worry, none of your system files will be touched if you don't want them to, so there is no risk that things will screw up. You can expect this from the installation process: 1. Ruby Enterprise Edition will be compiled and optimized for speed for this system. 2. Ruby on Rails will be installed for Ruby Enterprise Edition. 3. You will learn how to tell Phusion Passenger to use Ruby Enterprise Edition instead of regular Ruby. Press Enter to continue, or Ctrl-C to abort. Checking for required software... * C compiler... found at /usr/bin/gcc * C++ compiler... found at /usr/bin/g++ * The 'make' tool... found at /usr/bin/make * Zlib development headers... found * OpenSSL development headers... found * GNU Readline development headers... found -------------------------------------------- Target directory Where would you like to install Ruby Enterprise Edition to? (All Ruby Enterprise Edition files will be put inside that directory.) [/opt/ruby-enterprise] : -------------------------------------------- Compiling and optimizing the memory allocator for Ruby Enterprise Edition In the mean time, feel free to grab a cup of coffee. ./configure --prefix=/opt/ruby-enterprise --disable-dependency-tracking checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... configure: error: newly created file is older than distributed files! Check your system clock This is a virtual machine running on virtualbox, and the time of the host and the virtual machine are identical, and up to date. I've also tried running this after updating time with an ntp-client, so no avail. I tried this after reading this post here of someone having a similar problem [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ date Tue Apr 27 08:09:05 BST 2010 The other approach I've tried is to touch the top level the files in the build folder like suggested here, but this hasn't worked either (an to be honest, I'm not sure why it would have worked either) [vagrant@vagrant-centos-5 ruby-enterprise-1.8.7-2009.10]$ sudo touch ruby-enterprise-1.8.7-2009.10/* I'm not sure what I can do next here - the problem seems to be the bash configure script that returns this error error: newly created file is older than distributed files!, at line :2214 { echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi ### PROBLEM LINE #### # this line is the problem line - this is returned true, sometimes it isn't and I can't # see a pattern that that determines when this will test will pass or not. test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi the thing that makes this really frustrating is that this script works sometimes, when the VM has been running for an hour or so it works, but not at boot. There's nothing I see in the crontab that suggests any hourly tasks are run that might change the state of the system enough make a difference to this script working. I'm totally at a loss when it comes to debugging beyond here. What's the best approach to take here? Thanks

    Read the article

  • mine phrases (up to 3 words) from a given text

    - by DS_web_developer
    I asked before for a simple solution to my problem (using sphinx search service) but I got nowhere... someone has kindly provided me with this code <?php /** * $Project: GeoGraph $ * $Id$ * * GeoGraph geographic photo archive project * This file copyright (C) 2005 Barry Hunter ([email protected]) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /** * Provides the methods for updating the worknet tables * * @package Geograph * @author Barry Hunter <[email protected]> * @version $Revision$ */ function addTwoLetterPhrase($phrase) { global $w2; $w2[$phrase] = (isset($w2[$phrase]))?($w2[$phrase]+1):1; } function addThreeLetterPhrase($phrase) { global $w3; $w3[$phrase] = (isset($w3[$phrase]))?($w3[$phrase]+1):1; } function updateWordnet(&$db,$text,$field,$id) { global $w1,$w2,$w3; $alltext = strtolower(preg_replace('/\W+/',' ',str_replace("'",'',$text))); if (strlen($text)< 1) return; $words = preg_split('/ /',$alltext); $w1 = array(); $w2 = array(); $w3 = array(); //build a list of one word phrases foreach ($words as $word) { $w1[$word] = (isset($w1[$word]))?($w1[$word]+1):1; } //build a list of two word phrases $text = $alltext; $text = preg_replace('/(\w+) (\w+)/e','addTwoLetterPhrase("$1 $2")',$text); $text = $alltext; $text = preg_replace('/(\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+)/e','addTwoLetterPhrase("$1 $2")',$text); //build a list of three word phrases $text = $alltext; $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); $text = $alltext; $text = preg_replace('/(\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); $text = $alltext; $text = preg_replace('/(\w+) (\w+)/','',$text,1); $text = preg_replace('/(\w+) (\w+) (\w+)/e','addThreeLetterPhrase("$1 $2 $3")',$text); foreach ($w1 as $word=>$count) { $db->Execute("insert into wordnet1 set gid = $id,words = '$word',$field = $count");// ON DUPLICATE KEY UPDATE $field=$field+$count"); } foreach ($w2 as $word=>$count) { $db->Execute("insert into wordnet2 set gid = $id,words = '$word',$field = $count"); } foreach ($w3 as $word=>$count) { $db->Execute("insert into wordnet3 set gid = $id,words = '$word',$field = $count"); } } ?> It works fine and does almost exactly what I need....... except.... it is not utf8 friendly... I mean... it splits whole words into parts (on special chars) where it shouldn't! so my guess is I should use multibyte functions instead of regular preg_replace... I tried to replace preg_replace with mb_ereg_replace but it is not working as it should... at least not for 2 and 3 words phrases any ideas?

    Read the article

  • Scid Chess Program Compiling issue

    - by lbochitt
    First of all I would like to point that I'm new to Ubuntu so sorry if what I am asking is ridiculous. I have downloaded Scid 4.4 chess program and I have tried to compile it as it was explained on its website: 1) Initialize git. 2) Create a folder where you want to download and (?) compile the source, then cast: git init on your command line. 3) You're now ready to download the sources recall Fulvio's spell: git clone git://scid.git.sourceforge.net/gitroot/scid/scid This should get you the latest Scid source. 4) You're now ready to compile Scid. In principle, all you need to do is: ./configure and then make 5) If you get stuck, you probably need to get developer versions of tcl/tk. This translates into issuing these three commands: sudo apt-get install tcl8.5-dev sudo apt-get install tk8.5-dev sudo apt-get install zlib1g -dev 6) You should now be ready to compile The problem is that when I run ./configure to start compiling the following message appears on Terminal: configure: Makefile configuration program for Scid Tcl/Tk version: 8.5 Your operating system is: Linux 3.8.0-19-generic Location of "tcl.h": /usr/include/tcl8.5 Location of "tk.h": /usr/include/tcl8.5 Location of Tcl 8.5 library: not found Location of Tk 8.5 library: not found Checking if your system already has zlib installed: yes. Using Makefile.conf. Not all settings could be determined! The default Makefile was written. You will need to edit it before you can compile Scid. What should I do? Has anybody faced this problem before? Thanks in advance I have run ls -l /usr/include/tcl8.5/tcl.h here's the result: -rw-r--r-- 1 root root 87291 abr 22 10:45 /usr/include/tcl8.5/tcl.h I have also tried what you suggested Could you run git reset --hard HEAD and git clean -d -f to clean up everything using Git? Then run ./configure again. Just a shot in the dark - I've seen some GNU automake stuff still listening to its "cached" version of the results or something. Still no solution. I don't know why it can't recognize the library though it is installed I opened configure to see where the program looked for the library. This is the code: # libraryPath: List of possible locations of Tcl/Tk library. set libraryPath { /usr/lib /usr/lib64 /usr/local/tcl/lib /usr/local/lib /usr/X11R6/lib /opt/tcltk/lib /usr/lib/x86_64-linux-gnu } lappend libraryPath "/usr/lib/tcl${tclv}" lappend libraryPath "/usr/lib/tk${tclv}" lappend libraryPath "/usr/lib/tcl${tclv_nodot}" lappend libraryPath "/usr/lib/tk${tclv_nodot}" # Try to add tcl_library and auto_path values to libraryPath, # in case the user has a non-standard Tcl/Tk library location: if {[info exists ::tcl_library]} { lappend headerPath \ [file join [file dirname [file dirname $::tcl_library]] include] lappend libraryPath [file dirname $::tcl_library] lappend libraryPath $::tcl_library } if {[info exists ::auto_path]} { foreach name $::auto_path { lappend libraryPath $name } } if {! [info exists var(TCL_INCLUDE)]} { puts -nonewline { Location of "tcl.h": } set opt(tcl_h) [findDir "tcl.h" $headerPath "TCL_VERSION.*$tclv"] if {$opt(tcl_h) == ""} { puts "not found" set success 0 set opt(tcl_h) "$::defaultVar(TCL_INCLUDE)" } else { puts $opt(tcl_h) } } set opt(tcl_lib) "" if {! [info exists var(TCL_LIBRARY)]} { puts -nonewline " Location of Tcl $tclv library: " set opt(tcl_lib) [findDir "libtcl${tclv}.*" $libraryPath] if {$opt(tcl_lib) == ""} { set opt(tcl_lib) [findDir "libtcl${tclv_nodot}.*" $libraryPath] if {$opt(tcl_lib) == ""} { puts "not found" set success 0 set opt(tcl_lib) "$opt(tcl_h)" set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" } else { set opt(tcl_lib_file) "tcl${tclv_nodot}" puts $opt(tcl_lib) } } else { set opt(tcl_lib_file) "tcl\$(TCL_VERSION)" puts $opt(tcl_lib) } } if {! [info exists var(TCL_INCLUDE)]} { set var(TCL_INCLUDE) "-I$opt(tcl_h)" } if {! [info exists var(TCL_LIBRARY)]} { set var(TCL_LIBRARY) "-L$opt(tcl_lib) -l$opt(tcl_lib_file)" } return $success So I guess (And by guess I mean i have no idea how to code) I should write somewhere in here usr/lib/tcl8.5 and usr/lib/tk8.5, am I right?

    Read the article

  • Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

    - by Lunchbox
    Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

    Read the article

  • Problem interfacing GSM USB modem to Java application

    - by varun
    I am working on an open-source application called FrontlineSMS which can be interfaced with GSM modems to send and receive SMS. The windows installer that is available through their website works fine. Since i wanted to modify it, I got the source code and built the jar and tried to launch it. When I plug in the GSM modem and launch the application, it sometimes detects the GSM device and i am even able to send and receive SMS. Or else 1.) I get the following error- Launching FrontlineSMS for Windows... Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. 2.) OR the application sometimes crashes by creating a log file which contains: # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x10009ccb, pid=4452, tid=3464 # # JRE version: 6.0_20-b02 # Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 ) # Problematic frame: # C [rxtxSerial.dll+0x9ccb] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x03433000): JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] siginfo: ExceptionCode=0xc0000005, writing address 0x038cfa10 Registers: EAX=0x038cfa08, EBX=0x00000003, ECX=0x7c802413, EDX=0x00000001 ESP=0x070ef800, EBP=0x070ef9e8, ESI=0x3360b898, EDI=0x03433000 EIP=0x10009ccb, EFLAGS=0x00010202 Top of Stack: (sp=0x070ef800) 0x070ef800: 3360b8a0 6d9fbc40 6da2ed98 ffffffff 0x070ef810: 070ef848 6d8f0a2c 6d8f0340 070ef95c 0x070ef820: 070ef864 00000dfb 03433000 038cfa08 0x070ef830: 00000007 00000001 00000001 0000000a 0x070ef840: 03433bf4 fffffffe 070ef8f4 6d8f0b7a 0x070ef850: 070ef95c 03433bf8 6da6f210 6da6f538 0x070ef860: 070ef868 03433bf4 27f18708 27f18708 0x070ef870: 22eb9810 03433bc4 00000001 070ef898 Instructions: (pc=0x10009ccb) 0x10009cbb: 45 1c 7c 19 8b 85 44 fe ff ff 8b 95 4c fe ff ff 0x10009ccb: 89 50 08 8b 55 f4 89 d0 e9 f8 01 00 00 c7 85 50 Stack: [0x070a0000,0x070f0000], sp=0x070ef800, free space=13e070ef334k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [rxtxSerial.dll+0x9ccb] C [rxtxSerial.dll+0xa05e] j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub V [jvm.dll+0xf049c] V [jvm.dll+0x17fcf1] V [jvm.dll+0xf0667] V [jvm.dll+0xf06dd] V [jvm.dll+0x11a2a0] V [jvm.dll+0x1ddb14] V [jvm.dll+0x17f96c] C [msvcr71.dll+0x9565] C [kernel32.dll+0xb729] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) =>0x03433000 JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] 0x0344b800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=4404, stack(0x03dd0000,0x03e20000)] 0x002b7800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3236, stack(0x008c0000,0x00910000)] 0x03f6f400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1888, stack(0x038e0000,0x03930000)] 0x03ec2400 JavaThread "AWT-Shutdown" [_thread_blocked, id=4300, stack(0x03740000,0x03790000)] 0x032d8c00 JavaThread "EmailServerHandler" [_thread_blocked, id=5708, stack(0x03830000,0x03880000)] 0x032f7000 JavaThread "Incoming message processor" [_thread_blocked, id=4184, stack(0x03650000,0x036a0000)] 0x03004c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4828, stack(0x035a0000,0x035f0000)] 0x0303f400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3768, stack(0x03500000,0x03550000)] 0x02b1e800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4164, stack(0x02dd0000,0x02e20000)] 0x02b18c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2936, stack(0x02d80000,0x02dd0000)] 0x02b17400 JavaThread "Attach Listener" daemon [_thread_blocked, id=5444, stack(0x02d30000,0x02d80000)] 0x02b15c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4976, stack(0x02ce0000,0x02d30000)] 0x02b0d800 JavaThread "Finalizer" daemon [_thread_blocked, id=5876, stack(0x02c90000,0x02ce0000)] 0x02b0c400 JavaThread "Reference Handler" daemon [_thread_blocked, id=5984, stack(0x02c40000,0x02c90000)] Other Threads: 0x02b0ac00 VMThread [stack: 0x02bf0000,0x02c40000] [id=4508] 0x02b29800 WatcherThread [stack: 0x02e20000,0x02e70000] [id=6080] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 7808K, used 4003K [0x22990000, 0x23200000, 0x27ee0000) eden space 6976K, 45% used [0x22990000, 0x22ca8e90, 0x23060000) from space 832K, 100% used [0x23060000, 0x23130000, 0x23130000) to space 832K, 0% used [0x23130000, 0x23130000, 0x23200000) tenured generation total 17208K, used 15192K [0x27ee0000, 0x28fae000, 0x32990000) the space 17208K, 88% used [0x27ee0000, 0x28db6100, 0x28db6200, 0x28fae000) compacting perm gen total 13824K, used 13655K [0x32990000, 0x33710000, 0x36990000) the space 13824K, 98% used [0x32990000, 0x336e5f98, 0x336e6000, 0x33710000) ro space 10240K, 51% used [0x36990000, 0x36ebae00, 0x36ebae00, 0x37390000) rw space 12288K, 54% used [0x37390000, 0x37a272d8, 0x37a27400, 0x37f90000) Dynamic libraries: 0x00400000 - 0x00424000 C:\WINDOWS\system32\java.exe 0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll 0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll 0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll 0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll 0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll 0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll 0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll 0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll 0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll 0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll 0x76d60000 - 0x76d79000 C:\WINDOWS\system32\Iphlpapi.dll 0x63560000 - 0x63568000 C:\Program Files\National Instruments\Shared\mDNS Responder\nimdnsNSP.dll 0x63550000 - 0x63559000 C:\WINDOWS\system32\nimdnsResponder.dll 0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll 0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll 0x10000000 - 0x10012000 C:\Documents and Settings\bjz677\Desktop\client run\rxtxSerial.dll 0x73d90000 - 0x73db7000 C:\WINDOWS\system32\crtdll.dll 0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll 0x038d0000 - 0x038d6000 C:\WINDOWS\system32\d3d8thk.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll 0x03930000 - 0x03977000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL 0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL VM Arguments: java_command: net.frontlinesms.DesktopLauncher Launcher Type: SUN_STANDARD Environment Variables: JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\bin CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip; PATH=C:\Program Files\Intel\MKL\10.0.2.019\ia32\bin;C:\Program Files\Intel\VTune\CGGlbCache;C:\Program Files\Intel\VTune\Analyzer\Bin;C:\Program Files\Intel\VTune\Shared\Bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;s:\datamart\bin;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\IVI\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\MATLAB\R2007b\bin;C:\Program Files\MATLAB\R2007b\bin\win32;C:\VXIPNP\WinNT\Bin;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\IA32\Lib;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\EM64T\Lib;C:\VXIPNP\WinNT\Bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_20\bin USERNAME=xxx OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3 Memory: 4k page, physical 2094960k(1063364k free), swap 4032536k(3038408k free) vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003) time: Wed Jun 16 11:53:40 2010 elapsed time: 45 seconds Anyone knows what caused this? Please answer keeping in mind I am new to Java. Thanks, Varun

    Read the article

  • App freezing after lunch without any Error on Iphone Simulator?

    - by Meko
    HI.I am using CoreData on my UITable to show some records.It works when I first run.But if I run my app on simulator second time it shows up with data but then it stops.Sometimes it quits from app or it only froze and i cant click on table or tab bar. I looked also on Console but I thought there is no error.Here output from console The Debugger has exited with status 0. [Session started at 2010-03-30 00:22:06 +0300.] 2010-03-30 00:22:08.660 Paparazzi2[3556:207] Creating Photo: Urban disaster 2010-03-30 00:22:08.661 Paparazzi2[3556:207] Person is: Josh 2010-03-30 00:22:08.665 Paparazzi2[3556:207] Person is: Josh 2010-03-30 00:22:08.665 Paparazzi2[3556:207] -- Person Exists : Josh-- 2010-03-30 00:22:08.719 Paparazzi2[3556:207] Creating Photo: Concrete pitch forks 2010-03-30 00:22:08.719 Paparazzi2[3556:207] Person is: Josh 2010-03-30 00:22:08.721 Paparazzi2[3556:207] Person is: Josh 2010-03-30 00:22:08.721 Paparazzi2[3556:207] -- Person Exists : Josh-- 2010-03-30 00:22:08.727 Paparazzi2[3556:207] Creating Photo: Leaves on fire 2010-03-30 00:22:08.728 Paparazzi2[3556:207] Person is: Al 2010-03-30 00:22:08.734 Paparazzi2[3556:207] Person is: Al 2010-03-30 00:22:08.734 Paparazzi2[3556:207] -- Person Exists : Al-- [Session started at 2010-03-30 00:22:08 +0300.] GNU gdb 6.3.50-20050815 (Apple version gdb-967) (Tue Jul 14 02:11:58 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 3556. (gdb)

    Read the article

  • emacs indentation problem

    - by Gauthier
    I'm really trying to switch to emacs, but learning to setup the environment is a real pain. Everybody says it's worth it, so I just continue. I want my c code to be implemented that way: if(asdf) { asdr = 1; } Depending on the current standard (I know, don't get me started), could be: if(asdf) { asdr = 1; } I can't seem to change the indentation size from 2, it always looks like the GNU standard: if(asdf) { asdr = 1; } , which I dislike. Here is what I have put in my .emacs: ; Warn in C for while();, if(x=0), ... (global-cwarn-mode 1) ; no electric mode in c (c-toggle-electric-state -1) ; indent the current line only if the cursor is at the beginning of the line (setq-default c-tab-always-indent nil) (setq-default c-indent-level 4) (setq-default tab-width 4) (setq-default indent-tabs-mode nil) (setq-default c-basic-offset 4) (setq-default c-basic-indent 4) ; These commands I read about on the web, but they don't work? ;(highlight-tabs) ;(highlight-trailing_whitespace) This did not help, I have still the GNU indent. Anyone?

    Read the article

  • EXC_BAD_ACCESS NSUrlConnection

    - by Lars
    Hi all, i got an EXC_BAD_ACCESS when i perform the last line of the function (webData). -(void)requestSoap{ NSString *requestUrl = @"http://www.website.com/webservice.php"; NSString *soapMessage = @"the soap message"; //website and soapmessage are valid in original code. NSError **error; NSURLResponse *response; //Convert parameter string to url NSURL *url = [NSURL URLWithString:requestUrl]; NSMutableURLRequest *theRequest = [NSMutableURLRequest requestWithURL:url cachePolicy:NSURLRequestReloadIgnoringCacheData timeoutInterval:10]; NSString *msgLength = [NSString stringWithFormat:@"%d", [soapMessage length]]; //Create an XML message for webservice [theRequest addValue: @"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"]; [theRequest addValue: msgLength forHTTPHeaderField:@"Content-Length"]; [theRequest setHTTPMethod:@"POST"]; [theRequest setHTTPBody: [soapMessage dataUsingEncoding:NSUTF8StringEncoding]]; NSData *webData = [NSURLConnection sendSynchronousRequest:theRequest returningResponse:&response error:error]; } I tried not to release a thing, because what i read on the net is it's almost always a memory thing. When i debug the code (NSZombieEnabled = YES) this is what i get: [Session started at 2010-05-31 15:56:13 +0200.] GNU gdb 6.3.50-20050815 (Apple version gdb-1461.2) (Fri Mar 5 04:43:10 UTC 2010) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "x86_64-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 19856. test(19856) malloc: recording malloc stacks to disk using standard recorder test(19856) malloc: enabling scribbling to detect mods to free blocks test(19856) malloc: process 19832 no longer exists, stack logs deleted from /tmp/stack-logs.19832.test.w9Ek4L.index test(19856) malloc: stack logs being written into /tmp/stack-logs.19856.test.URRpQF.index Program received signal: “EXC_BAD_ACCESS”. Does anybody have a clue?? Thanks a lot! Lars

    Read the article

  • Making REST request using LWP::Simple

    - by Alienfluid
    I am trying to use LWP::Simple to make a GET request to a REST service. Here's the simple code: use LWP::Simple; $uri = "http://api.stackoverflow.com/0.8/questions/tagged/php"; $jsonresponse= get $uri; print $jsonresponse; On my local machine, running Ubuntu 10.4, and Perl version 5.10.1: farhan@farhan-lnx:~$ perl --version This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi I can get the correct response and have it printed on the screen. E.g.: farhan@farhan-lnx:~$ head -10 output.txt { "total": 1000, "page": 1, "pagesize": 30, "questions": [ { "tags": [ "php", "arrays", "coding-style" (... snipped ...) But on my host's machine to which I SSH into, I get garbage printed on the screen for the same exact code. I am assuming it has something to do with the encoding, but the REST service does not return the character set type in the response, so how do I force LWP::Simple to use the correct encoding? Any ideas what may be going on here? Here's the version of Perl on my host's machine: [dredd]$ perl --version This is perl, v5.8.8 built for x86_64-linux-gnu-thread-multi

    Read the article

  • Verifying regular expression for malware removal

    - by Legend
    Unfortunately, one of my web servers was compromised recently. I have two questions. Is there a way I can scan the downloaded directory for backdoors? Is there anything I can do to ensure that at least known vulnerabilities do not exist anymore? Secondly, the malware put up the following in all index.* files on my webserver: <script>/*GNU GPL*/ try{window.onload = function(){var Hva23p3hnyirlpv7 = document.createElement('script');Hva23p3hnyirlpv7.setAttribute('type', 'text/javascript');Hva23p3hnyirlpv7.setAttribute('id', 'myscript1');Hva23p3hnyirlpv7.setAttribute('src',.... CODE DELETED FOR SAFETY.... );}} catch(e) {}</script> Obviously, this snippet seems to download some rogue file onto the user's machine. I downloaded an entire backup of the web server and am currently trying to remove this snippet from all file. For this I am doing: find ./ -name "index.*" -exec sed -i 's/<script>\/\*GNU GPL\*.*Hva23p3hnyirlpv7.*<\/script>//g' {} \; Just wanted to verify if this does the trick. I verified it with a few files but I want to be sure that this doesn't delete some valid code. Anyone suggests any other modifications?

    Read the article

  • Why does my REST request return garbage data?

    - by Alienfluid
    I am trying to use LWP::Simple to make a GET request to a REST service. Here's the simple code: use LWP::Simple; $uri = "http://api.stackoverflow.com/0.8/questions/tagged/php"; $jsonresponse= get $uri; print $jsonresponse; On my local machine, running Ubuntu 10.4, and Perl version 5.10.1: farhan@farhan-lnx:~$ perl --version This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi I can get the correct response and have it printed on the screen. E.g.: farhan@farhan-lnx:~$ head -10 output.txt { "total": 1000, "page": 1, "pagesize": 30, "questions": [ { "tags": [ "php", "arrays", "coding-style" (... snipped ...) But on my host's machine to which I SSH into, I get garbage printed on the screen for the same exact code. I am assuming it has something to do with the encoding, but the REST service does not return the character set type in the response, so how do I force LWP::Simple to use the correct encoding? Any ideas what may be going on here? Here's the version of Perl on my host's machine: [dredd]$ perl --version This is perl, v5.8.8 built for x86_64-linux-gnu-thread-multi

    Read the article

  • delayed evaluation of code in subroutines - 5.8 vs. 5.10 and 5.12

    - by Brock
    This bit of code behaves differently under perl 5.8 than it does under perl 5.12: my $badcode = sub { 1 / 0 }; print "Made it past the bad code.\n"; [brock@chase tmp]$ /usr/bin/perl -v This is perl, v5.8.8 built for i486-linux-gnu-thread-multi [brock@chase tmp]$ /usr/bin/perl badcode.pl Illegal division by zero at badcode.pl line 1. [brock@chase tmp]$ /usr/local/bin/perl -v This is perl 5, version 12, subversion 0 (v5.12.0) built for i686-linux [brock@chase tmp]$ /usr/local/bin/perl badcode.pl Made it past the bad code. Under perl 5.10.1, it behaves as it does under 5.12: brock@laptop:/var/tmp$ perl -v This is perl, v5.10.1 (*) built for i486-linux-gnu-thread-multi brock@laptop:/var/tmp$ perl badcode.pl Made it past the bad code. I get the same results with a named subroutine, e.g. sub badcode { 1 / 0 } I don't see anything about this in the perl5100delta pod. Is this an undocumented change? A unintended side effect of some other change? (For the record, I think 5.10 and 5.12 are doing the Right Thing.)

    Read the article

  • Bibliography behaves strange in lyx.

    - by Orjanp
    Hi! I have created a Bibliography section in my document written in lyx. It uses a book layout. For some reason it did start over again when I added some more entries. The new entries was made some time later than the first ones. I just went down to key-27 and hit enter. Then it started on key-1 again. Does anyone know why it behaves like this? The lyx code is below. \begin{thebibliography}{34} \bibitem{key-6}Lego mindstorms, http://mindstorms.lego.com/en-us/default.aspx \bibitem{key-7}C.A.R. Hoare. Communicating sequential processes. Communications of the ACM, 21(8):666-677, pages 666\textendash{}677, August 1978. \bibitem{key-8}C.A.R. Hoare. Communicating sequential processes. Prentice-Hall, 1985. \bibitem{key-9}CSPBuilder, http://code.google.com/p/cspbuilder/ \bibitem{key-10}Rune Møllegård Friborg and Brian Vinter. CSPBuilder - CSP baset Scientific Workflow Modelling, 2008. \bibitem{key-11}Labview, http://www.ni.com/labview \bibitem{key-12}Robolab, http://www.lego.com/eng/education/mindstorms/home.asp?pagename=robolab \bibitem{key-13}http://code.google.com/p/pycsp/ \bibitem{key-14}Paparazzi, http://paparazzi.enac.fr \bibitem{key-15}Debian, http://www.debian.org \bibitem{key-16}Ubuntu, http://www.ubuntu.com \bibitem{key-17}GNU, http://www.gnu.org \bibitem{key-18}IVY, http://www2.tls.cena.fr/products/ivy/ \bibitem{key-19}Tkinter, http://wiki.python.org/moin/TkInter \bibitem{key-20}pyGKT, http://www.pygtk.org/ \bibitem{key-21}pyQT4, http://wiki.python.org/moin/PyQt4 \bibitem{key-22}wxWidgets, http://www.wxwidgets.org/ \bibitem{key-23}wxPython GUI toolkit, http://www.wxPython.org \bibitem{key-24}Python programming language, http://www.python.org \bibitem{key-25}wxGlade, http://wxglade.sourceforge.net/ \bibitem{key-26}http://numpy.scipy.org/ \bibitem{key-27}http://www.w3.org/XML/ \bibitem{key-1}IVY software bus, http://www2.tls.cena.fr/products/ivy/ \bibitem{key-2}sdas \bibitem{key-3}sad \bibitem{key-4}sad \bibitem{key-5}fsa \bibitem{key-6}sad \bibitem{key-7} \end{thebibliography}

    Read the article

  • Backwards compatibility when using Core Data

    - by Alex
    Could anybody shed some light as to why is my app crashing with the following error on iPhone OS 2.2.1 dyld: Symbol not found: _OBJC_CLASS_$_NSPredicate Referenced from: /var/mobile/Applications/456F243F-468A-4969-9BB7-A4DF993AE89C/AppName.app/AppName Expected in: /System/Library/Frameworks/Foundation.framework/Foundation I have weak linked CoreData.framework, and have the Base SDK set to 3.0 and Deployment Target set to SDK 2.2 The app already uses other 3.0 features when available and I did not have any problems with those. But apparently the backward-compatibility methods used for other features do not work with Core Data. The app crashes before app delegate's applicationDidFinishLaunching gets called. Here's the debugger log: [Session started at 2010-05-25 20:17:03 -0400.] GNU gdb 6.3.50-20050815 (Apple version gdb-1119) (Thu May 14 05:35:37 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys001 Loading program into debugger… sharedlibrary apply-load-rules all warning: Unable to read symbols from "MessageUI" (not yet mapped into memory). warning: Unable to read symbols from "CoreData" (not yet mapped into memory). Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-12038-42 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… [Switching to thread 10755] [Switching to thread 10755] Re-enabling shared library breakpoint 1 Re-enabling shared library breakpoint 2 Re-enabling shared library breakpoint 3 Re-enabling shared library breakpoint 4 Re-enabling shared library breakpoint 5 (gdb) continue warning: Unable to read symbols for ""/Users/alex/iPhone Projects/AppName/build/Debug-iphoneos"/AppName.app/AppName" (file not found). dyld: Symbol not found: _OBJC_CLASS_$_NSPredicate Referenced from: /var/mobile/Applications/456F243F-468A-4969-9BB7-A4DF993AE89C/AppName.app/AppName Expected in: /System/Library/Frameworks/Foundation.framework/Foundation (gdb)

    Read the article

  • strange redefined symbols

    - by Chris H
    I included this header into one of my own: http://codepad.org/lgJ6KM6b When I compiled I started getting errors like this: CMakeFiles/bin.dir/SoundProjection.cc.o: In function `Gnuplot::reset_plot()': /usr/lib/gcc/x86_64-pc-linux-gnu/4.3.4/include/g++-v4/new:105: multiple definition of `Gnuplot::reset_plot()' CMakeFiles/bin.dir/main.cc.o:project/gnuplot-cpp/gnuplot_i.hpp:962: first defined here CMakeFiles/bin.dir/SoundProjection.cc.o: In function `Gnuplot::set_smooth(std::basic_string, std::allocator const&)': project/gnuplot-cpp/gnuplot_i.hpp:1041: multiple definition of `Gnuplot::set_smooth(std::basic_string, std::allocator const&)' CMakeFiles/bin.dir/main.cc.o:project/gnuplot-cpp/gnuplot_i.hpp:1041: first defined here CMakeFiles/bin.dir/SoundProjection.cc.o:/usr/include/eigen2/Eigen/src/Core/arch/SSE/PacketMath.h:41: multiple definition of `Gnuplot::m_sGNUPlotFileName' I know it's hard to see in this mess, but look at where the redefinitions are taking place. They take place in files like /usr/lib/gcc/x86_64-pc-linux-gnu/4.3.4/include/g++-v4/new:105. How is the new operator getting information about a gnuplot header? I can't even edit that file. How could that ever even be possible? I'm not even sure how to start debugging this. I hope I've provided enough information. I wasn't able to reproduce this in a small project. I mostly just looking for tips on how to find out why this is happening, and how to track it down. Thanks.

    Read the article

  • Valgrind says "stack allocation," I say "heap allocation"

    - by Joel J. Adamson
    Dear Friends, I am trying to trace a segfault with valgrind. I get the following message from valgrind: ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C5: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) ==3683== ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C7: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) However, here's the offending line: /* allocate mating table */ age_dep_data->mtable = malloc (age_dep_data->geno * sizeof (double *)); if (age_dep_data->mtable == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); for (int j = 0; j < age_dep_data->geno; j++) { 131=> age_dep_data->mtable[j] = calloc (age_dep_data->geno, sizeof (double)); if (age_dep_data->mtable[j] == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); } What gives? I thought any call to malloc or calloc allocated heap space; there is no other variable allocated here, right? Is it possible there's another allocation going on (the offending stack allocation) that I'm not seeing? You asked to see the code, here goes: /* Copyright 2010 Joel J. Adamson <[email protected]> $Id: age_dep.c 1010 2010-04-21 19:19:16Z joel $ age_dep.c:main file Joel J. Adamson -- http://www.unc.edu/~adamsonj Servedio Lab University of North Carolina at Chapel Hill CB #3280, Coker Hall Chapel Hill, NC 27599-3280 This file is part of an investigation of age-dependent sexual selection. This code is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with haploid. If not, see <http://www.gnu.org/licenses/>. */ #include "age_dep.h" /* global variables */ extern struct argp age_dep_argp; /* global error message variables */ char * nullmsg = "Null pointer: %i"; /* error message for conversions: */ char * errmsg = "Representation error: %s"; /* precision for formatted output: */ const char prec[] = "%-#9.8f "; const size_t age_max = AGEMAX; /* maximum age of males */ static int keep_going_p = 1; int main (int argc, char ** argv) { /* often used counters: */ int i, j; /* read the command line */ struct age_dep_args age_dep_args = { NULL, NULL, NULL }; argp_parse (&age_dep_argp, argc, argv, 0, 0, &age_dep_args); /* set the parameters here: */ /* initialize an age_dep_params structure, set the members */ age_dep_params_t * params = malloc (sizeof (age_dep_params_t)); if (params == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); age_dep_init_params (params, &age_dep_args); /* initialize frequencies: this initializes a list of pointers to initial frqeuencies, terminated by a NULL pointer*/ params->freqs = age_dep_init (&age_dep_args); params->by = 0.0; /* what range of parameters do we want, and with what stepsize? */ /* we should go from 0 to half-of-theta with a step size of about 0.01 */ double from = 0.0; double to = params->theta / 2.0; double stepsz = 0.01; /* did you think I would spell the whole word? */ unsigned int numparts = floor(to / stepsz); do { #pragma omp parallel for private(i) firstprivate(params) \ shared(stepsz, numparts) for (i = 0; i < numparts; i++) { params->by = i * stepsz; int tries = 0; while (keep_going_p) { /* each time through, modify mfreqs and mating table, then go again */ keep_going_p = age_dep_iterate (params, ++tries); if (keep_going_p == ERANGE) error (ERANGE, ERANGE, "Failure to converge\n"); } fprintf (stdout, "%i iterations\n", tries); } /* for i < numparts */ params->freqs = params->freqs->next; } while (params->freqs->next != NULL); return 0; } inline double age_dep_pmate (double age_dep_t, unsigned int genot, double bp, double ba) { /* the probability of mating between these phenotypes */ /* the female preference depends on whether the female has the preference allele, the strength of preference (parameter bp) and the male phenotype (age_dep_t); if the female lacks the preference allele, then this will return 0, which is not quite accurate; it should return 1 */ return bits_isset (genot, CLOCI)? 1.0 - exp (-bp * age_dep_t) + ba: 1.0; } inline double age_dep_trait (int age, unsigned int genot, double by) { /* return the male trait, a function of the trait locus, age, the age-dependent scaling parameter (bx) and the males condition genotype */ double C; double T; /* get the male's condition genotype */ C = (double) bits_popcount (bits_extract (0, CLOCI, genot)); /* get his trait genotype */ T = bits_isset (genot, CLOCI + 1)? 1.0: 0.0; /* return the trait value */ return T * by * exp (age * C); } int age_dep_iterate (age_dep_params_t * data, unsigned int tries) { /* main driver routine */ /* number of bytes for female frequencies */ size_t geno = data->age_dep_data->geno; size_t genosize = geno * sizeof (double); /* female frequencies are equal to male frequencies at birth (before selection) */ double ffreqs[geno]; if (ffreqs == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); /* do not set! Use memcpy (we need to alter male frequencies (selection) without altering female frequencies) */ memmove (ffreqs, data->freqs->freqs[0], genosize); /* for (int i = 0; i < geno; i++) */ /* ffreqs[i] = data->freqs->freqs[0][i]; */ #ifdef PRMTABLE age_dep_pr_mfreqs (data); #endif /* PRMTABLE */ /* natural selection: */ age_dep_ns (data); /* normalized mating table with new frequencies */ age_dep_norm_mtable (ffreqs, data); #ifdef PRMTABLE age_dep_pr_mtable (data); #endif /* PRMTABLE */ double * newfreqs; /* mutate here */ /* i.e. get the new frequency of 0-year-olds using recombination; */ newfreqs = rec_mating (data->age_dep_data); /* return block */ { if (sim_stop_ck (data->freqs->freqs[0], newfreqs, GENO, TOL) == 0) { /* if we have converged, stop the iterations and handle the data */ age_dep_sim_out (data, stdout); return 0; } else if (tries > MAXTRIES) return ERANGE; else { /* advance generations */ for (int j = age_max - 1; j < 0; j--) memmove (data->freqs->freqs[j], data->freqs->freqs[j-1], genosize); /* advance the first age-class */ memmove (data->freqs->freqs[0], newfreqs, genosize); return 1; } } } void age_dep_ns (age_dep_params_t * data) { /* calculate the new frequency of genotypes given additive fitness and selection coefficient s */ size_t geno = data->age_dep_data->geno; double w[geno]; double wbar, dtheta, ttheta, dcond, tcond; double t, cond; /* fitness parameters */ double mu, nu; mu = data->wparams[0]; nu = data->wparams[1]; /* calculate fitness */ for (int j = 0; j < age_max; j++) { int i; for (i = 0; i < geno; i++) { /* calculate male trait: */ t = age_dep_trait(j, i, data->by); /* calculate condition: */ cond = (double) bits_popcount (bits_extract(0, CLOCI, i)); /* trait-based fitness term */ dtheta = data->theta - t; ttheta = (dtheta * dtheta) / (2.0 * nu * nu); /* condition-based fitness term */ dcond = CLOCI - cond; tcond = (dcond * dcond) / (2.0 * mu * mu); /* calculate male fitness */ w[i] = 1 + exp(-tcond) - exp(-ttheta); } /* calculate mean fitness */ /* as long as we calculate wbar before altering any values of freqs[], we're safe */ wbar = gen_mean (data->freqs->freqs[j], w, geno); for (i = 0; i < geno; i++) data->freqs->freqs[j][i] = (data->freqs->freqs[j][i] * w[i]) / wbar; } } void age_dep_norm_mtable (double * ffreqs, age_dep_params_t * params) { /* this function produces a single mating table that forms the input for recombination () */ /* i is female genotype; j is male genotype; k is male age */ int i,j,k; double norm_denom; double trait; size_t geno = params->age_dep_data->geno; for (i = 0; i < geno; i++) { double norm_mtable[geno]; /* initialize the denominator: */ norm_denom = 0.0; /* find the probability of mating and add it to the denominator */ for (j = 0; j < geno; j++) { /* initialize entry: */ norm_mtable[j] = 0.0; for (k = 0; k < age_max; k++) { trait = age_dep_trait (k, j, params->by); norm_mtable[j] += age_dep_pmate (trait, i, params->bp, params->ba) * (params->freqs->freqs)[k][j]; } norm_denom += norm_mtable[j]; } /* now calculate entry (i,j) */ for (j = 0; j < geno; j++) params->age_dep_data->mtable[i][j] = (ffreqs[i] * norm_mtable[j]) / norm_denom; } } My current suspicion is the array newfreqs: I can't memmove, memcpy or assign a stack variable then hope it will persist, can I? rec_mating() returns double *.

    Read the article

  • Stack Overflow when debugging application in iPhone simulator

    - by mjdth
    I'm getting this every time I attempt to debug my app in the simulator: [Session started at 2010-05-11 16:16:52 -0500.] GNU gdb 6.3.50-20050815 (Apple version gdb-1467) (Wed Apr 21 06:57:21 UTC 2010) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "x86_64-apple-darwin".sharedlibrary apply-load-rules all Attaching to process 51573. Program received signal: “EXC_BAD_ACCESS”. Data Formatters temporarily unavailable, will re-try after a 'continue'. (Cannot call into the loader at present, it is locked.) I've looked around and found a few similar cases, but they all seem to be related to a missing file and an extra necessary build phase. I'm getting no notification of a missing file here so I'm not sure where to start to fix this and get the app running again. Thanks for any insight!

    Read the article

  • How to detect whether there is a specific member variable in class?

    - by Kirill V. Lyadvinsky
    For creating algorithm template function I need to know whether x or X (and y or Y) in class that is template argument. It may by useful when using my function for MFC CPoint class or GDI+ PointF class or some others. All of them use different x in them. My solution could be reduces to the following code: template<int> struct TT {typedef int type;}; template<class P> bool Check_x(P p, typename TT<sizeof(&P::x)>::type b = 0) { return true; } template<class P> bool Check_x(P p, typename TT<sizeof(&P::X)>::type b = 0) { return false; } struct P1 {int x; }; struct P2 {float X; }; // it also could be struct P3 {unknown_type X; }; int main() { P1 p1 = {1}; P2 p2 = {1}; Check_x(p1); // must return true Check_x(p2); // must return false return 0; } But it does not compile in Visual Studio, while compiling in the GNU C++. With Visual Studio I could use the following template: template<class P> bool Check_x(P p, typename TT<&P::x==&P::x>::type b = 0) { return true; } template<class P> bool Check_x(P p, typename TT<&P::X==&P::X>::type b = 0) { return false; } But it does not compile in GNU C++. Is there universal solution? UPD: Structures P1 and P2 here are only for example. There are could be any classes with unknown members.

    Read the article

  • Thread-local storage segfaults on NetBSD only?

    - by bortzmeyer
    Trying to run a C++ program, I get segmentation faults which appear to be specific to NetBSD. Bert Hubert wrote the simple test program (at the end of this message) and, indeed, it crashes only on NetBSD. % uname -a NetBSD golgoth 5.0.1 NetBSD 5.0.1 (GENERIC) #0: Thu Oct 1 15:46:16 CEST 2009 +stephane@golgoth:/usr/obj/sys/arch/i386/compile/GENERIC i386 % g++ --version g++ (GCC) 4.1.3 20080704 prerelease (NetBSD nb2 20081120) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. % gdb thread-local-storage-powerdns GNU gdb 6.5 Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386--netbsdelf"... (gdb) run Starting program: /home/stephane/Programmation/C++/essais/thread-local-storage-powerdns Program received signal SIGSEGV, Segmentation fault. 0x0804881b in main () at thread-local-storage-powerdns.cc:20 20 t_a = new Bogo('a'); (gdb) On other Unix, it works fine. Is there a known issue in NetBSD with C++ thread-local storage? #include <stdio.h> class Bogo { public: explicit Bogo(char a) { d_a = a; } char d_a; }; __thread Bogo* t_a; int main() { t_a = new Bogo('a'); Bogo* b = t_a; printf("%c\n", b->d_a); }

    Read the article

  • Highlighting correctly in an emacs major mode

    - by Paul Nathan
    Hi, I am developing an emacs major mode for a language (aka mydsl). However, using the techniques on xahlee's site doesn't seem to be working for some reason (possibly older emacs dialect..) The key issues I am fighting with are (1) highlighting comments is not working and (2), the use of regexp-opt lines is not working. I've reviewed the GNU manual and looked over cc-mode and elisp mode... those are significantly more complicated than I need. ;;;Standard # to newline comment ;;;Eventually should also have %% to %% multiline block comments (defun mydsl-comment-dwim (arg) "comment or uncomment" (interactive "*P") (require 'newcomment) (let ((deactivate-mark nil) (comment-start "#") (comment-end "") comment-dwim arg))) (defvar mydsl-events '("reservedword1" "reservedword2")) (defvar mydsl-keywords '("other-keyword" "another-keyword")) ;;Highlight various elements (setq mydsl-hilite '( ; stuff between " ("\"\\.\\*\\?" . font-lock-string-face) ; : , ; { } => @ $ = are all special elements (":\\|,\\|;\\|{\\|}\\|=>\\|@\\|$\\|=" . font-lock-keyword-face) ( ,(regexp-opt mydsl-keywords 'words) . font-lock-builtin-face) ( ,(regexp-opt mydsl-events 'words) . font-lock-constant-face) )) (defvar mydsl-tab-width nil "Width of a tab for MYDSL mode") (define-derived-mode mydsl-mode fundamental-mode "MYDSL mode is a major mode for editing MYDSL files" ;Recommended by manual (kill-all-local-variables) (setq mode-name "MYDSL script") (setq font-lock-defaults '((mydsl-hilite))) (if (null mydsl-tab-width) (setq tab-width mydsl-tab-width) (setq tab-width default-tab-width) ) ;Comment definitions (define-key mydsl-mode-map [remap comment-dwim] 'mydsl-comment-dwim) (modify-syntax-entry ?# "< b" mydsl-mode-syntax-table) (modify-syntax-entry ?\n "> b" mydsl-mode-syntax-table) ;;A gnu-correct program will have some sort of hook call here. ) (provide 'mydsl-mode)

    Read the article

  • echo -e acts differently when run in a script by root on ubuntu

    - by ekrub
    When running a bash script on ubuntu 9.10, I get different behavior from bash echo's "-e" option depending on whether or not I'm running as root. Consider this script: $ cat echo-test if [ "`whoami`" = "root" ]; then echo "Running as root" fi echo Testing /bin/echo -e /bin/echo -e "foo\nbar" echo Testing bash echo -e echo -e "foo\nbar" When run as non-root user, I see this output: $ ./echo-test Testing /bin/echo -e foo bar Testing bash echo -e foo bar When run as root, I see this output: $ sudo ./echo-test Running as root Testing /bin/echo -e foo bar Testing bash echo -e -e foo bar Notice the "-e" being echoed in the last case ("-e foo" instead of "foo" on the second-to-last line). When running a script as root, the echo command runs as if "-e" was given and, if -e is given, the option itself is echoed. I can understand some subtle differences in behavior between /bin/echo and bash echo, but I would expect bash echo to behave the same no matter which user invokes it. Anyone know why this is the case? Is this a bug in bash echo? FYI -- I'm running GNU bash, version 4.0.33(1)-release (x86_64-pc-linux-gnu)

    Read the article

  • My iPhone app ran fine in simulator but crashed on device (iPod touch 3.1.2) test, I got the followi

    - by Mickey Shine
    I was running myapp on an iPod touch and I noticed it missed some libraries. Is that the reason? [Session started at 2010-03-19 15:57:04 +0800.] GNU gdb 6.3.50-20050815 (Apple version gdb-1128) (Fri Dec 18 10:08:53 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys007 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-237-78 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… [Switching to thread 11779] [Switching to thread 11779] sharedlibrary apply-load-rules all (gdb) continue warning: Unable to read symbols for "/Library/MobileSubstrate/MobileSubstrate.dylib" (file not found). 2010-03-19 15:57:18.892 myapp[2338:207] MS:Notice: Installing: com.yourcompany.myapp [myapp] (478.52) 2010-03-19 15:57:19.145 myapp[2338:207] MS:Notice: Loading: /Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib warning: Unable to read symbols for "/Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/usr/lib/libsubstrate.dylib" (file not found). MS:Warning: message not found [myappAppDelegate applicationWillResignActive:] MS:Warning: message not found [myappAppDelegate applicationDidBecomeActive:] 2010-03-19 15:57:19.550 myapp[2338:207] in FirstViewController 2010-03-19 15:57:20.344 myapp[2338:207] in load table view 2010-03-19 15:57:20.478 myapp[2338:207] in loading splash view 2010-03-19 15:57:22.793 myapp[2338:207] in set interface Program received signal: “0”. warning: check_safe_call: could not restore current frame

    Read the article

  • Failed at linking C++ [undefined reference boost::filesystem3 ... ]

    - by Pphax
    i'm having some troubles compiling my work, i'm using ubuntu with g++! i get a lot of these messages: undefined reference to `boost::filesystem3::directory_entry::m_get_status(boost::system::error_code*) const' undefined reference to `boost::filesystem3::path::extension() const' undefined reference to `boost::filesystem3::path::filename() const' undefined reference to `boost::filesystem3::path::filename() const' (etc...) I've searched and found maaany answers but none of those work for me. [...] -lboost_system (/usr/lib/gcc/i686-linux-gnu/4.4.5/../../../../lib/libboost_system.so) -lboost_filesystem (/usr/lib/gcc/i686-linux-gnu/4.4.5/../../../../lib/libboost_filesystem.so) [...] (when linking it shows those two libraries, i'm guessing the error is related to the second one. hax@lap:~$ locate libboost_filesystem.so /home/hax/boost_1_47_0/bin.v2/libs/filesystem/build/gcc-4.4.5/release/threading-multi/libboost_filesystem.so.1.47.0 /home/hax/boost_1_47_0/stage/lib/libboost_filesystem.so /home/hax/boost_1_47_0/stage/lib/libboost_filesystem.so.1.47.0 /usr/lib/libboost_filesystem.so /usr/lib/libboost_filesystem.so.1.42.0 /usr/local/lib/libboost_filesystem.so /usr/local/lib/libboost_filesystem.so.1.47.0 this is the related line on my makefile: -L. -L../bncsutil/src/bncsutil/ -L../StormLib/stormlib/ -L../boost/lib/ -lbncsutil -lpthread -ldl -lz -lStorm -lmysqlclient_r -lboost_date_time -lboost_thread -lboost_system -lboost_filesystem -Wl -t I tried pointing with -L several different places where i saw filesystem.so was located but it didn't work! Can anyone see the problem in those lines? if you need me to put some extra data i'll do it, i'm not seeing the problem :( Thanks :)

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >