Search Results

Search found 2616 results on 105 pages for 'mike williamson'.

Page 29/105 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Removing Windows 2003 Server and Domain from Network

  - by Mike Ruford

  I have a Windows-2003-Server with five computers (Windows XP) accessing it using a domain. I would like to remove the server and the domain and go straight to peer to peer (file sharing via a NAS). We are moving our email to an Exchange Hosting Provider. We no longer need people to log in from different computers and have their desktops available from any computer on the network (however, I do want to get those files off of this setup). Any suggestions?

  Read the article

• Returning row values based on conditional formatting variables

  - by Mike Bodes

  I'm not entirely sure how to properly explain this, but here we go... I'm trying to create a single budgeting document that allows me to manage purchasing and reconciliation for multiple projects. I would like to create separate sheets per project and have purchased items populate on a master sheet. Using conditional formatting, I've set one of the columns to display an item's status (waiting for approval, approved, ordered, received). I would like the contents of an entire row to populate in a new sheet table once the status is set to "Received." The sheet should update descendingly. I can't attach an image because I don't have a 10 reputation.. Any help is greatly appreciated.

  Read the article

• NGINX SSI Not working

  - by Mike Kelly

  I'm having trouble getting SSI to work on NGINX. You can see the problem if you hit http://www.bakerycamp.com/test.shtml. Here is the contents of that file: <!--# echo hi --> If you hit this in a browser, you see the SSI directive in the content - so apparently NGINX is not interpreting the SSI directive. My NGINX config file looks like this: server { listen 80; server_name bakerycamp.com www.bakerycamp.com; access_log /var/log/nginx/bakerycamp.access.log; index index.html; root /home/bakerycamp.com; location / { ssi on; } # Deny access to all hidden files and folders location ~ /\. { access_log off; log_not_found off; deny all; } } I did not build NGINX from sources but installed it using apt-get. I assume it has the SSI module (since that is default) but perhaps not? Should I just bite the bullet and rebuild from sources? Is there anyway to tell if the installed NGINX supports SSI and my config is just wrong?

  Read the article

• Selinux interfering with vboxwebsrv or phpvirtualbox

  - by Mike W

  I have a brand new installation of Fedora 18, with a brand new installation of Virtualbox 4.2. I have spent a painful few hours trying to get phpVirtualBox working. Apache 2.4 and PHP 5.4 are installed, along with the phpVirtualBox software. Attempting to access phpVirtualBox allowed me to login, but then I'd have a prolonged wait until an 'Error fetching HTTP headers' message appeared. Finally, I set SeLinux to permissive, and Bingo! things start to work. For some reason the SeLinux Troubleshooter isn't flagging any messages from SeLinux, I don't know what to look for now. This is a development box so I could leave SeLinux set to permissive but I will need to make this work in anger on the next project. My question, then, is this: What changes to SeLinux policies do I need to make to allow phpVirtualBox and vboxwebsrv to work together? If there's more information I can post that will assist I'll gladly post it - just let me know what it is.

  Read the article

• HISTCONTROL=ignoreboth not working Debian Lenny

  - by Mike

  Can anybody confirm if by setting the the following environmental variables under debian lenny will make previous history entries not to be saved. GNU bash, version 3.2.39(1)-release export HISTCONTROL=ignoreboth export HISTSIZE=500 I have added them to my /etc/bash.bashrc but I keep getting repeated commands. Thanks

  Read the article

• Replacement Alternative for Dell FY606 in a Poweredge T105

  - by Mike C

  I have recently upgraded my Poweredge T105 server to use a SAS 6/ir RAID controller. Unfortunately, I did not realize at the time that adding the card would cause the BIOS to complain about a missing hard drive fan. This warning requires that a user press F1 to continue, which is disastrous in a server environment. I have searched all over found that the specific part I need is a Dell FY606 fan. However, I have yet to find a suitable retailer that covers this part. I have contacted Dell and they do not have this part in stock. Are there any alternative models of a fan that I could use in place of an FY606? Seems like a pretty straightforward part, just a fan that connects to a 4-pin power connector on the motherboard.

  Read the article

• Why did my Cisco router hang?

  - by Mike Pennington

  We have a Cisco 1841 in our storage IDF that was originally running a 12.4(1) IP-BASE image; I wanted to upgrade to an advancedservicesk9-mz image, but the flash did not have enough space, so I deleted the running image. Later I tried inserting a larger CF from a Catalyst4500, which crashed the 1841 router (now without a bootable image). Using another 1800 series router, I loaded the 12.4(25g) advancedservicesk9 image and verified the image checksums. I set the confreg to 0x2102 from rommon and booted the new image; however the 1841 now hangs indefinitely after printing the IOS export control banner. I have tried four other images, all with the same results. What is wrong with this router? UPDATE 1: I tried loading images from a FAT16-formatted USB, but this didn't work either. I also tried tftpdnld from rommon, but got a get_mac_address(): Search T_IDPROM_MACADDR (0xc3) failed Illegal MAC address. error and the file would not load.

  Read the article

• Configuring and managing Windows web server

  - by Mike C.

  Hello, I run a few websites and I was thinking of paying for a dedicated Windows web server from GoDaddy instead of paying for each site's hosting individually. I know enough about IIS to configure the Host Header and stuff like that, but I'm a little fuzzy about the email portion of the hosting. I have a few questions: Do I need to install an SMTP server on the web server to allow for emails to be sent/received to a website email address? Or is there another approach that I'm unaware of? Are there tools that monitor the amount of bandwidth used by the server? GoDaddy charges for bandwidth and I want to make sure I don't go over. Am I opening a can of worms that I don't really want to open by going the dedicated server route? Things like server updates, security, etc? Thanks!

  Read the article

• Setting up Dynamic DNS for Wireless Cameras And Accessing them Remotely

  - by Mike Szp.

  I've been trying to set up two TP LINK wireless N cameras that I bought so that I can see them remotely. I've set it up so that each has it's own ip address (192...105/192...106) and I can access them if I type that into the browser of a local computer The thing is that I don't know how to access them from another remote PC. My current setup is a a each camera connected to the router which then connects to the modem. When I set up the Dynamic DNS, and I access the "webpage" for my IP through a remote computer, it just goes to the configuration page of the modem. I have no idea how to make it go to the router or to the cameras. the router has its own ip range of 192.168.1.x while the modem has 192.168.2.x To access the cameras I type into the web browser: 192.168.1.114:100 on the local computer but I have no idea how to get there through the webpage of my Dynamic DNS remotely.

  Read the article

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• Roundcube access from outside local network

  - by Mike K

  I have setup hmailserver on a windows xp pro computer and everything is working great when it comes to getting it to send and receive email. Now here is where my problem comes in... I have setup roundcube using uniserver and everything works great internally. Now, what I am trying to do is to be able to access roundcube from the internet outside of the local network. I have opened up ports 80, 443, and the mysql port yet I am still unable to access this from outside of the network. The error message that I am getting is as followed: Forbidden You don't have permission to access /webmail/ on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. I believe something needs to be edited in the apache config file. Any help would be greatly appreciated. I am hoping I dont need to run this on windows server but I'm kinda losing hope and thinking I will need to because I need IIS.

  Read the article

• IIS FTP Server works locally, but cannot connect from remote

  - by Mike Christensen

  I'm trying to setup an FTP server on Windows 2008 Server. I can connect locally: C:\>ftp localhost Connected to WebHead1 220 Microsoft FTP Service However, when I try to connect from remote, it doesn't work: ~>ftp x.x.x.x ftp: Can't connect to `x.x.x.x': Operation timed out ftp: Can't connect to `x.x.x.x' I've tried everything I can think of with the settings. The FTP server is bound to all unassigned IPs and listening on port 21. I've also checked "FTP Server" in the firewall settings. Nothing appears in the FTP log files. I'm totally out of ideas!

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Reboot fails with "Invalid partition"

  - by Mike Clark

  My laptop can't reboot. Any time something restarts the laptop (e.g. to apply Windows updates, or Start Menu-Restart, etc), the computer sits at a black screen with the message "Invalid partition" displayed in console text. When this happens, I power off the computer, then power it back on, and it boots up fine. OK, now the history behind this: This laptop is a new Dell. The day I got it, I used gparted to reclaim 30 GB of disk space that had been allocated to a "recovery partition" in the middle of the laptop's primary drive. (I have DVDs for recovery and I didn't want to waste 30 GB of SSD space on recovery data.) So I used gparted to delete the recovery partition and resize the primary Windows partition to use up the new free space. As expected when resizing a boot partition, the computer would no longer boot. I used Windows Recovery Console to fix the boot process: FIXMBR C: FIXBOOT C: BOOTCFG /rebuild This worked fine and the computer boots up fine. But, as mentioned earlier, the laptop still can't reboot. Any idea on how to fix this without completely reformatting the disk and reinstalling Windows from scratch? It's Windows 7.

  Read the article

• Virus disturbing my audio

  - by Mike M

  i had a desktop.ini virus on my computer. I managed to get rid of it (i think) but now my Mcafee firewall will not stay on for more than 3 secs before it turns off again. Also something is freezing my computer for a few secs when a window is open, also my audio goes in and out when watching videos and listening to music. I figured out that it only happens when i connect to the internet. I have to restart my PC and quickly disconnect the internet if i want to listen to music. also i have vista

  Read the article

• What's the best way to know if your web server goes down?

  - by Mike Christensen

  I noticed my website only got 8 visitors today, which means it probably went down very early this morning and I never noticed. Why it went down is another story. Ideally, I'd like to be emailed if my web server becomes unresponsive or does not return an HTTP 200. Is there either a cloud-based service (either free or pretty cheap) that can monitor your website? If not, is there a good free/open source program I can run on either a Linux or Windows machine that will monitor a website and email me if it goes down? Thanks!

  Read the article

• NX Client running on OS X 10.6.3 => NX Server Ubuntu 10.04: weird keymapping issue

  - by Mike D

  I have been using Ubuntu 9.10 at work after switching from vista. After being (expectedly) disappointed with performance over VNC (via VPN) when logging in from home, I came across the NOMACHINE suite. Last week, I upgraded from OS X 10.6.2 = 10.6.3 at home. After that, I also updated my NX Client at home to the latest version, as there were issues with recent changes in the OSX X11 setup that rendered the NX connection useless. At that point, everything worked fine. Fast forward, I upgraded from 9.10 = 10.04 on my work machine the next day, and after coming home and trying to log-in remotely, I noticed that the "s" and "m" keys, when pressed locally, acted as if the meta key was being pressed on the remote machine. That is, the "s" key opens in the Ubuntu login menu (the power icon), and the "m" key opens the messaging menu. I found some info on using xmodmap to remap keys, however, I can't even begin to fathom what keys I could remap to solve this issue. Any ideas?

  Read the article

• EBS full device confusion

  - by Mike

  I have a 500GB EBS device (/dev/xvdf) mounted to /vol and all data on the box seems to be writing to /vol correctly (see du output below). For some reason /dev/xvda1 is totally full. Any idea what's going on here? $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 32G 30G 8.0K 100% / udev 34G 8.0K 34G 1% /dev tmpfs 14G 176K 14G 1% /run none 5.0M 0 5.0M 0% /run/lock none 34G 0 34G 0% /run/shm /dev/xvdb 827G 201M 785G 1% /mnt /dev/xvdf 500G 145G 356G 29% /vol $ du -sh * 8.7M bin 18M boot 8.0K dev 5.1M etc 48K home 0 initrd.img 80M lib 4.0K lib64 16K lost+found 4.0K media 20K mnt 4.0K opt 0 proc 40K root 176K run 7.1M sbin 4.0K selinux 4.0K srv 0 sys 4.0K tmp 414M usr 356M var 0 vmlinuz 145G vol

  Read the article

• Should I move to an Azure database?

  - by Mike Flynn

  I am currently using a database from an installed instance on my web server in a VM on Azure. I was thinking about moving it to an actual Azure Database so I could load balance the web server. Does the Azure database work the same way as a straight install? Will it cost more or the same since I am just moving to a new server? Basically looking for advantages and disadvantages. I am familiar with SQL Server Management Studio.

  Read the article

• How to install windows without graphic's driver?

  - by Mike Redford

  My notebook's(Compaq Presario V5000) graphic card damaged last week and after that it will be restarted when I want to boot. So I tested it via windows live, and it booted from CD without any problem (as you know in win live, the graphic card doesn't recognize, and in setting of graphic card write : unknown ) Now my question : Is there anyway to install windows without any graphic driver please ?for example, Should I delete some installation files ?! PS : I tested Windows XP , VISTA and 7 but, when it goes to GUI installation restarted again :( Thanks for your help

  Read the article

• CentOS - PHP - Yum Install with Custom ./configure params

  - by Mike Purcell

  I have successfully configured and compiled php on my dev server, and works great, but after talking to a sysadmin buddy, he informed that custom compiles of the latest builds are not recommended for production (or even development) systems. He noted a situation where they custom configured and compiled PHP 5.3.6, only to find that there was some issue with a low-level Postgres driver, so they had to revert back to 5.3.3. So I am considering going back to yum to install PHP, however I have several custom configuration settings and was wondering if it's possible to pass or configure how PHP will be compiled through YUM? My current configure line: Configure Command => './configure' '--with-libdir=lib64' '--prefix=/usr/local/_custom/app/php' '--with-config-file-path=/usr/local/_custom/app/php/etc' '--with-config-file-scan-dir=/usr/local/_custom/app/php/etc/modules' '--disable-all' '--with-apxs2=/usr/sbin/apxs' '--with-curl=/usr/sbin/curl' '--with-gd' '--with-iconv' '--with-jpeg-dir=/usr/lib' '--with-mcrypt=/usr/bin' '--with-pcre-regex' '--with-pdo-mysql=mysqlnd' '--with-png-dir=/usr/lib' '--with-zlib' '--enable-ctype' '--enable-dom' '--enable-hash' '--enable-json' '--enable-libxml' '--enable-mbstring' '--enable-mbregex' '--enable-pdo' '--enable-session' '--enable-simplexml' '--enable-xml' '--enable-xmlreader' '--enable-xmlwriter'

  Read the article

• Can't access internet using a domain joined computer outside the domain environment

  - by Mike Walsh

  We had an unused box at work so took it home. It had been joined to the domain and hasn't been unjoined. When I try to use it at home (logging in with a local admin account) I can't seem to access internet pages. It gets correct IP and gateway for the local network and correct DNS servers for the home ADSL connection. I can happily ping the home router (which doesn't have any tricky firewall settings). Can't seem to ping outside, get any DNS to resolve, or (obviously) get any web pages. Is there some problem here with this having been joined to the domain?

  Read the article

• wget: Turn Off Forced .html Retreival

  - by Mike B

  When performing a recursive download, I specify a pattern via the -R parameter for wget to reject, but if this file is a HTML file, wget downloads the file regardless of whether or not it matches the pattern. e.g. wget -r -R "*dynamicfile*" example.com still retrieves files such as example.com/dynamicfile1.html Is there a way to prevent this?

  Read the article

• How to set the preffered network interface in linx

  - by Mike Cooper

  I have my network set up like this. http://docs.google.com/Doc?docid=0AZ1YxuLE4djaZGhqN2s1NmRfMjhjNjc0Ym1meg&hl=en In words: I have a machine (Calcium, running Arch Linux) that has two network interfaces. eth0 is hoooked up to a router, and is gigabit. Eth1 is hooked up directly to the university network over 10Megabit. The router's uplink is hooked up to the university network as well, and it is also 10Megabit. Currently (I believe) all traffic on Calcium is going through eth0, through the router, regardless of whether it is internal or external. (How can I confirm this?) Ideally, traffic that is destined for the internal network (192.168.10.0/24) would travel over eth0 to the router, and wherever it is going. ALL other traffic should go over eth1. I suspect that this behavior could be acheived with IP tables? I don't really know where to start looking to learn that though, so any links would be appreciated.

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >