Search Results

Search found 1623 results on 65 pages for 'packet analyzers'.

Page 29/65 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• VLAN ACLs and when to go Layer 3

  - by wuckachucka

  I want to: a) segment several departments into VLANs with the hopes of restricting access between them completely (Sales never needs to talk to Support's workstations or printers and vice-versa) or b) certain IP addresses and TCP/UDP ports across VLANS -- i.e. permitting the Sales VLAN to access the CRM Web Server in the Server VLAN on port 443 only. Port-wise, I'll need a 48-port switch and another 24-port switch to go with the two existing 24-port Layer 2 switches (Linksys); I'm looking at going with D-Links or HP Procurves as Cisco is out of our price range. Question #1: From what I understand (and please correct me if I'm wrong), if the Servers (VLAN10) and Sales (VLAN20) are all on the same 48-port switch (or two stacked 24-port switches), afaik, the switch "knows" what VLANs and ports each device belongs to and will switch packets between them; I can also apply ACLs to restrict access between VLANs at this point. Is this correct? Question #2: Now lets say that Support (VLAN30) is on a different switch (one of the Linksys) switches. I'm assuming I'll need to trunk (tag) switch #2's VLANs across to switch #1, so switch #1 sees switch #2's VLAN30 (and vice-versa). Once Switch #1 can "see" VLAN30, I'm assuming I can then apply ACLs as stated in Question #1. Is this correct? Question #3: Once Switch #1 can see all the VLANs, can I achieve the seemingly "Layer 3" ACL filtering of restricting access to Server VLAN on only certain TCP/UDP ports and IP addresses (say, only permitting 3389 to the Terminal Server, 192.168.10.4/32). I say "seemingly" because some of the Layer 2 switches mention the ability to restrict ports and IP addresses through the ACLs; I (perhaps mistakenly) thought that in order to have Layer 3 ACLs (packet filtering), I'd need to have at least one Layer 3 switch acting as a core router. If my assumptions are incorrect, at which point do you need a Layer 3 switch for inter-VLAN routing vs. inter-VLAN switching? Is it generally only when you need that higher-level packet filtering ability between your departments?

  Read the article

• Mounting any Windows share from OS X 10.7.5 suddenly stopped working

  - by user2169619

  I have problem with mounting Windows network shares from my OS X 10.7.5 - it worked but it stopped and nothing helps and nothing in logs. Here what I get when trying to mount it manually: mount -t smbfs //10.0.0.7/d /tmp/test When doing sniffing with tshark - no packet it sent through and I get immediately return from the command: mount_smbfs: server connection failed: Unknown error: -1 Nothing in /var/log/syslog.log and /var/log/kern.log. The Finder does not work either - it throws an error that something is wrong (in czech thus I'm not sending the message here). I just cannot connect to any network shares. In virtual Windows 7 in Parallels Desktop I can connect successfully, but not within the network share (so the Win7 is behind OS X NAT) but only with its own IP address. The Windows server share is on the same network segment connected through switch. Any advice how to debug and what can be wrong? I spent hours to find solution on Google and here but no-one with this kind of problem and I do not know how to further debug it since there is no meaningful log / trace etc. I can ping 10.0.0.7 and I can connect to FTP server on 10.0.0.7 - the Windows machine (XP) has firewall completely turned off. The problem is that with tshark, I'm not seeing any packet sending to 10.0.0.7 so it's not even trying to reach the server.

  Read the article

• Odd log entries when starting up PotgreSQL

  - by Shadow

  When restarting pgSQL, I get the following log entries: 2010-02-10 16:08:05 EST LOG: received smart shutdown request 2010-02-10 16:08:05 EST LOG: autovacuum launcher shutting down 2010-02-10 16:08:05 EST LOG: shutting down 2010-02-10 16:08:05 EST LOG: database system is shut down 2010-02-10 16:08:07 EST LOG: database system was shut down at 2010-02-10 16:08:05 EST 2010-02-10 16:08:07 EST LOG: autovacuum launcher started 2010-02-10 16:08:07 EST LOG: database system is ready to accept connections 2010-02-10 16:08:07 EST LOG: connection received: host=[local] 2010-02-10 16:08:07 EST LOG: incomplete startup packet 2010-02-10 16:08:07 EST LOG: connection received: host=[local] 2010-02-10 16:08:07 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:08 EST LOG: connection received: host=[local] 2010-02-10 16:08:08 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:08 EST LOG: connection received: host=[local] 2010-02-10 16:08:08 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:09 EST LOG: connection received: host=[local] 2010-02-10 16:08:09 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:09 EST LOG: connection received: host=[local] 2010-02-10 16:08:09 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:10 EST LOG: connection received: host=[local] 2010-02-10 16:08:10 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:10 EST LOG: connection received: host=[local] 2010-02-10 16:08:10 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:11 EST LOG: connection received: host=[local] 2010-02-10 16:08:11 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:11 EST LOG: connection received: host=[local] 2010-02-10 16:08:11 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:12 EST LOG: connection received: host=[local] 2010-02-10 16:08:12 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:12 EST LOG: connection received: host=[local] 2010-02-10 16:08:12 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:12 EST LOG: connection received: host=[local] 2010-02-10 16:08:12 EST LOG: incomplete startup packet My question regarding a potential consequence of this is posted here: http://stackoverflow.com/questions/2238954/mdb2-says-connection-failed-db-logs-say-otherwise , but I didn't realize this was happening when I asked that question, and I figured this [part of the] problem is for SF. Edit: I can connect to the database and manipulate things normally with the psql CLI and the postgres user.

  Read the article

• TCPDump and IPTables DROP by string

  - by Tiffany Walker

  by using tcpdump -nlASX -s 0 -vvv port 80 I get something like: 14:58:55.121160 IP (tos 0x0, ttl 64, id 49764, offset 0, flags [DF], proto TCP (6), length 1480) 206.72.206.58.http > 2.187.196.7.4624: Flags [.], cksum 0x6900 (incorrect -> 0xcd18), seq 1672149449:1672150889, ack 4202197968, win 15340, length 1440 0x0000: 4500 05c8 c264 4000 4006 0f86 ce48 ce3a E....d@[email protected].: 0x0010: 02bb c407 0050 1210 63aa f9c9 fa78 73d0 .....P..c....xs. 0x0020: 5010 3bec 6900 0000 0f29 95cc fac4 2854 P.;.i....)....(T 0x0030: c0e7 3384 e89a 74fa 8d8c a069 f93f fc40 ..3...t....i.?.@ 0x0040: 1561 af61 1cf3 0d9c 3460 aa23 0b54 aac0 .a.a....4`.#.T.. 0x0050: 5090 ced1 b7bf 8857 c476 e1c0 8814 81ed P......W.v...... 0x0060: 9e85 87e8 d693 b637 bd3a 56ef c5fa 77e8 .......7.:V...w. 0x0070: 3035 743a 283e 89c7 ced8 c7c1 cff9 6ca3 05t:(>........l. 0x0080: 5f3f 0162 ebf1 419e c410 7180 7cd0 29e1 _?.b..A...q.|.). 0x0090: fec9 c708 0f01 9b2f a96b 20fe b95a 31cf ......./.k...Z1. 0x00a0: 8166 3612 bac9 4e8d 7087 4974 0063 1270 .f6...N.p.It.c.p What do I pull to use IPTables to block via string. Or is there a better way to block attacks that have something in common? Question is: Can I pick any piece from that IP packet and call it a string? iptables -A INPUT -m string --alog bm --string attack_string -j DROP In other words: In some cases I can ban with TTL=xxx and use that should an attack have the same TTL. Sure it will block some legit packets but if it means keeping the box up it works till the attack goes away but I would like to LEARN how to FIND other common things in a packet to block with IPTables

  Read the article

• How to stop NAT dropping idle connections?

  - by WGH

  I have a TCP connection that can be idle for many hours. The traffic is flowing from the server to the client only. One might say it's kind of push notification. My home router, however, tends to drop the connection silently after 20 minutes (the value of /proc/sys/net/netfilter/nf_conntrack_tcp_timeout_established). The server detects the loss once it tries to send anything (I assume it receives RST from the router itself). As client never sends anything, it never detects the loss. RFC 5382 "NAT Behavioral Requirements for TCP" states the following: A NAT can check if an endpoint for a session has crashed by sending a TCP keep-alive packet and receiving a TCP RST packet in response. It makes sense. It's much more effective than sending keep-alives by the host itself (as only NAT knows its own timeout). And probably not hard to implement. Is there any NAT solutions implementing this? It would be great if there was a way to enable this in iptables.

  Read the article

• what are valid 'ack' values?

  - by WileECanisLatrans

  having an issue with a vendor who claims the cause of a problem is an invalid 'ack' value in the tcp data. I'm using java so I didn't write this layer. I used snoop to capture the traffic on the wire and am using wireshark to display the data. Here is what is happening. After receiving a multi-packet(5) message I see a multi-pack(3) response. The first packet in the response has a value for 'ack' that is different than the 'ack' value in the other two packets. The vendor claims this data is suspect. I've provided sample data below. I'm not a tcp expert so I don't know if this is a problem or not. I've tried to find something on valid ack values and it seems to me the value should be 80018 but that doesn't mean the 78345 is wrong. I found this on the web and it seems to apply but I'm not sure: "the ack value of any data segment is considered valid as long as it does not acknowledge data ahead of the next segment to send". Thanks for your help. My understanding is the vendor has written their own tcp layer. * source seq ack len * vendor 75465 10924 0 * vendor 75465 10924 1440 * vendor 76905 10924 1440 * vendor 78345 10924 1440 * vendor 79785 10924 233 * me 10924 78345 0 * me 10924 80018 0 * me 10924 80018 197

  Read the article

• Nginx proxy to IIS Connection Timeout

  - by MitMaro

  I am having an issue with random timeouts with a Nginx proxy connecting to an IIS machine. I have been watching a packet capture between the two servers and it seems that the IIS machine is receiving a SYN packet but is not responding with what I think should be an ACK response. Before the timeout occurs there seems to be a slower response from the IIS server. There is no unusual memory or processor usage on the IIS or Nginx machine. Some information on the servers and setup: Nginx Machine: Ubuntu 10.04 64bit Nginx 0.7.65 Amazon EC2 Windows Machine: Windows Server 2008 IIS 7 ASP.net Application in Integrated Mode Nginx Error: 2011/01/10 17:57:40 [error] 8297#0: *30 connect() failed (110: Connection timed out) while connecting to upstream, client: 209.***.***.***, server: secure.example.com, request: "GET /a/path/deliver.aspx HTTP/1.1", upstream: "http://***.***.***.****:****//another/path/deliver.aspx", host: "secure.example.com" WireShark Packets 6521.449528 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477422103 TSER=0 WS=7 6524.443239 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477422403 TSER=0 WS=7 6530.443241 10.***.***.*** -> 174.***.***.*** TCP 38695 > us-cli [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=477423003 TSER=0 WS=7

  Read the article

• jdbc4 CommunicationsException

  - by letronje

  I have a machine running a java app talking to a mysql instance running on the same instance. the app uses jdbc4 drivers from mysql. I keep getting com.mysql.jdbc.exceptions.jdbc4.CommunicationsException at random times. Here is the whole message. Could not open JDBC Connection for transaction; nested exception is com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was25899 milliseconds ago.The last packet sent successfully to the server was 25899 milliseconds ago, which is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem. For mysql, the value of global 'wait_timeout' and 'interactive_timeout' is set to 3600 seconds and 'connect_timeout' is set to 60 secs. the wait timeout value is much higher than the 26 secs(25899 msecs). mentioned in the exception trace. I use dbcp for connection pooling and here is spring bean config for the datasource. <bean id="dataSource" destroy-method="close" class="org.apache.commons.dbcp.BasicDataSource" > <property name="driverClassName" value="com.mysql.jdbc.Driver"/> <property name="url" value="jdbc:mysql://localhost:3306/db"/> <property name="username" value="xxx"/> <property name="password" value="xxx" /> <property name="poolPreparedStatements" value="false" /> <property name="maxActive" value="3" /> <property name="maxIdle" value="3" /> </bean> Any idea why this could be happening? Will using c3p0 solve the problem ?

  Read the article

• Good HTTP Monitoring tools

  - by ffffff

  I look for HTTP to work with a Linux system server monitor tool every protocol. I know, and will not there be it in whom or a freeware? When, for example, I dump 80/tcp with a packet monitor to be concrete # tethereal -i ppp0 port 80 -x Capturing on ppp0 1244206390.030474 219.111.xx.xx -> 74.125.xx.xx HTTP GET /search?output=js&num=0&dt=1244206414703&client=pub-3031568651010206&q=Cagliari%20Flight&ad=n3&ie=utf8&oe=utf8&channel=0091594208&adtest=off HTTP/1.1 0000 00 04 02 00 00 00 00 00 00 00 00 00 00 00 08 00 ................ 0010 45 00 01 e5 ee 82 40 00 40 06 d2 b5 db 6f 02 5b E.....@[email protected].[ 0020 4a 7d 4f 93 d4 29 00 50 3e df 4c 63 4b 6b 42 e0 J}O..).P>.LcKkB Such output is provided, but there is too much unnecessary information such as an SYN packet or a header. What I want The IP address of the client and sending out character string(Get; the contents of the POST) Among the output character string of the server only as for the HTML (Content-Type:) I am what is chisel) of a thing of text/html. I can set a filter and am the best if only information wanting can accumulate in the log.

  Read the article

• Using a nat rule to translate 80/443 traffic to web server, but internal users cannot access it using external ip/domain name

  - by Josh

  I am using Cisco ASDM for ASA I have my internal network called soa. My outside interface is called outside. Let's say my outside IP given to me by my ISP isp is y.y.y.y I have a web server inside my network with a static ip of x.x.x.110. I have configured 2 static nat rules (one for http the other for https). Source is x.x.x.110. Interface is outside, service (http or https). Maybe I am doing this wrong, but when I run the packet tracer, I choose outside interface and for the source IP I used 8.8.8.8 and the destination ip is my outside IP address, y.y.y.y When I run that, it shows the packet traversing successfully, using 9 steps. For my other test, I switch to the soa interface, input an ip on that network, and leave the destination the same. This test comes up with 2 steps and then fails on my access list. When I see the rule that fails, it is my catch all which is source: any desitnation: any, service: ip action: deny. What rule do I need to make to allow my soa network access to go out and come back in by my external IP addess (using a domain name attached to that ip in my dns, of course)?

  Read the article

• iptables drops some packets on port 80 and i don't know the cause.

  - by Janning

  Hi, We are running a firewall with iptables on our Debian Lenny system. I show you only the relevant entries of our firewall. Chain INPUT (policy DROP 0 packets, 0 bytes) target prot opt in out source destination ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW Chain OUTPUT (policy DROP 0 packets, 0 bytes) target prot opt in out source destination ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Some packets get dropped each day with log messages like this: Feb 5 15:11:02 host1 kernel: [104332.409003] dropped IN= OUT=eth0 SRC= DST= LEN=1420 TOS=0x00 PREC=0x00 TTL=64 ID=18576 DF PROTO=TCP SPT=80 DPT=59327 WINDOW=54 RES=0x00 ACK URGP=0 for privacy reasons I replaced IP Addresses with and This is no reason for any concern, but I just want to understand what's happening. The web server tries to send a packet to the client, but the firewall somehow came to the conclusion that this packet is "UNRELATED" to any prior traffic. I have set a kernel parameter ip_conntrack_ma to a high enough value to be sure to get all connections tracked by iptables state module: sysctl -w net.ipv4.netfilter.ip_conntrack_max=524288 What's funny about that is I get one connection drop every 20 minutes: 06:34:54 droppedIN= 06:52:10 droppedIN= 07:10:48 droppedIN= 07:30:55 droppedIN= 07:51:29 droppedIN= 08:10:47 droppedIN= 08:31:00 droppedIN= 08:50:52 droppedIN= 09:10:50 droppedIN= 09:30:52 droppedIN= 09:50:49 droppedIN= 10:11:00 droppedIN= 10:30:50 droppedIN= 10:50:56 droppedIN= 11:10:53 droppedIN= 11:31:00 droppedIN= 11:50:49 droppedIN= 12:10:49 droppedIN= 12:30:50 droppedIN= 12:50:51 droppedIN= 13:10:49 droppedIN= 13:30:57 droppedIN= 13:51:01 droppedIN= 14:11:12 droppedIN= 14:31:32 droppedIN= 14:50:59 droppedIN= 15:11:02 droppedIN= That's from today, but on other days it looks like this, too (sometimes the rate varies). What might be the reason? Any help is greatly appreciated. kind regards Janning

  Read the article

• Possible for linux bridge to intercept traffic?

  - by A G

  I have a linux machine setup as a bridge between a client and a server; brctl addbr0 brctl addif br0 eth1 brctl addif br0 eth2 ifconfig eth1 0.0.0.0 ifconfig eth2 0.0.0.0 ip link set br0 up I also have an application listening on port 8080 of this machine. Is it possible to have traffic destined for port 80 to be passed to my application? I have done some research and it looks like it could be done using ebtables and iptables. Here is the rest of my setup: //set the ebtables to pass this traffic up to ip for processing; DROP on the broute table should do this ebtables -t broute -A BROUTING -p ipv4 --ip-proto tcp --ip-dport 80 -j redirect --redirect-target DROP //set iptables to forward this traffic to my app listening on port 8080 iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 8080 --tproxy-mark 1/1 iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1/1 //once the flows are marked, have them delivered locally via loopback interface ip rule add fwmark 1/1 table 1 ip route add local 0.0.0.0/0 dev lo table 1 //enable ip packet forwarding echo 1 > /proc/sys/net/ipv4/ip_forward However nothing is coming into my application. Am I missing anything? My understanding is that the target DROP on the broute BROUTING chain will push it up to be processed by iptables. Secondly, are there any other alternatives I should investigate? Edit: IPtables gets it at nat PREROUTING, but it looks like it drops after that; the INPUT chain (in either mangle or filter) doesn't see the packet.

  Read the article

• Linux iptables / conntrack performance issue

  - by tim

  I have a test-setup in the lab with 4 machines: 2 old P4 machines (t1, t2) 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t3) Intel e1000 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t4) Intel e1000 to test linux firewall performance since we got bitten by a number of syn-flood attacks in the last months. All machines run Ubuntu 12.04 64bit. t1, t2, t3 are interconnected through an 1GB/s switch, t4 is connected to t3 via an extra interface. So t3 simulates the firewall, t4 is the target, t1,t2 play the attackers generating a packetstorm thorugh (192.168.4.199 is t4): hping3 -I eth1 --rand-source --syn --flood 192.168.4.199 -p 80 t4 drops all incoming packets to avoid confusion with gateways, performance issues of t4 etc. I watch the packet stats in iptraf. I have configured the firewall (t3) as follows: stock 3.2.0-31-generic #50-Ubuntu SMP kernel rhash_entries=33554432 as kernel parameter sysctl as follows: net.ipv4.ip_forward = 1 net.ipv4.route.gc_elasticity = 2 net.ipv4.route.gc_timeout = 1 net.ipv4.route.gc_interval = 5 net.ipv4.route.gc_min_interval_ms = 500 net.ipv4.route.gc_thresh = 2000000 net.ipv4.route.max_size = 20000000 (I have tweaked a lot to keep t3 running when t1+t2 are sending as many packets as possible). The result of this efforts are somewhat odd: t1+t2 manage to send each about 200k packets/s. t4 in the best case sees aroung 200k in total so half of the packets are lost. t3 is nearly unusable on console though packets are flowing through it (high numbers of soft-irqs) the route cache garbage collector is no way near to being predictable and in the default setting overwhelmed by very few packets/s (<50k packets/s) activating stateful iptables rules makes the packet rate arriving on t4 drop to around 100k packets/s, efectively losing more than 75% of the packets And this - here is my main concern - with two old P4 machines sending as many packets as they can - which means nearly everyone on the net should be capable of this. So here goes my question: Did I overlook some importand point in the config or in my test setup? Are there any alternatives for building firewall system especially on smp systems?

  Read the article

• Problem with connecting two different networks

  - by tanascius

  I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

  Read the article

• MSMQ on Win2008 R2 won't receive messages from older clients

  - by Graffen

  I'm battling a really weird problem here. I have a Windows 2008 R2 server with Message Queueing installed. On another machine, running Windows 2003 is a service that is set up to send messages to a public queue on the 2008 server. However, messages never show up on the server. I've written a small console app that just sends a "Hello World" message to a test queue on the 2008 machine. Running this app on XP or 2003 results in absolutely nothing. However, when I try running the app on my Windows 7 machine, a message is delivered just fine. I've been through all sorts of security settings, disabled firewalls on all machines etc. The event log shows nothing of interest, and no exceptions are being thrown on the clients. Running a packet sniffer (WireShark) on the server reveals only a little. When trying to send a message from XP or 2003 I only see an ICMP error "Port Unreachable" on port 3527 (which I gather is an MQPing packet?). After that, silence. Wireshark shows a nice little stream of packets when I try from my Win7 client (as expected - messages get delivered just fine from Win7). I've enabled MSMQ End2End logging on the server, but only entries from the messages sent from my Win7 machine are appearing in the log. So somehow it seems that messages are being dropped silently somewhere along the route from XP or 2003 to my 2008 server. Does anyone have any clues as to what might be causing this mysterious behaviour? -- Jesper

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• MAC-Address based routing

  - by d-fens

  Here is what i want to do: I have a bunch of systems, some might have the same Public-IP, i disable ARP. I have a Firewall (either IP Layer or bridge-FW) between these systems and the internet. Depending on the destination port of incoming IP-Packets to some of these Public-IPs i want to set the destinsation-Ethernet-Adress. So for instance System A has IP 8.8.8.8, mac de:ad:be:ef:de:ad, arp disabled System B has IP 8.8.8.8, mac 1f:1f:1f:1f:1f:1f, arp disabled Firewall has IP 8.8.8.1, arp disabled on that interface Incoming packet to IP 8.8.8.8 tcp dest port 100 Incoming packet to IP 8.8.8.8 tcp dest port 101 Firewall sets dest-mac for 1.) - de:ad:be:ef:de:ad Firewall sets dest-mac for 2.) - 1f:1f:1f:1f:1f:1f Second scenario: System A and System B establish outgoing TCP-Connections, and the firewall matches the dst-mac of the incoming IP-Packets (response packets) to the senders-mac address. is this possible in any way with linux and iptables? edit: i read ebtables might "work" in a hackish way for this purpose but i am not sure...

  Read the article

• Log analyzer that calculates "time on page"?

  - by netvope

  I need to get an idea of the average "time on page" or "page view duration" for each page on my websites without client-side scripting (such as using onunload event handler). Is any of the free log analyzers capable of doing this? I looked at Webalizer, AWStats and Analog, but they don't seem to have such a function. The closest thing is "visits duration" in AWStats, but I'd like to see "page view duration" instead. I know that visitor tracking is inaccurate without client-side scripting, but I can bear with it. Google Analytics seems to provide a "time on page" metric without hooking the onunload event (but correct me if I'm wrong), so I believe this is possible.

  Read the article

• Scalable WordPress Host for High-Volume Site?

  - by Jonathan Eunice

  I need recommendations for a scalable web host for a high volume WordPress web site. For my purposes, high-volume might be 100K-500K visitors/hour. Might think towards a 1M/hour burst rate as a "high water mark." I know WP isn't the highest-performing platform out there (ha!), but it's non-negotiable. I can do "the usual optimizations" (e.g. put static files in a CDN, run and follow the advice of performance analyzers like YSlow, etc). But it will still be WordPress, and there will be a dozen or so plugins involved. So, where to host the site? Most "what's the best WordPress host?" discussions seem to focus on lowest-cost. I need the opposite. What are the high-volume, scalable, or clustered WordPress hosts with which you've had great experiences?

  Read the article

• Web log files analyzer

  - by Peter Štibraný

  I already use Google Analytics on my page, but I'd like to get additional info from log files. I've looked at various packages during last days, but nothing impressed me so far. Some requirements: must work on log file level (I use apache combined logs, but can configure apache to produce other types of logs) can generate static reports (windows/linux) or use GUI (windows only) should be easy to add custom user agents, and rerun analysis if it can recognize installation of eclipse plugins from log, that would be big plus understands google serp position referer should not require two days to setup (awstats, I am looking at you) should be still under active developement (i.e. analog isn't good answer) preferrably free, or at not very expensive :-) Any good analyzers programs out there?

  Read the article

• New SSIS tool on Codeplex – SSIS Log Analyzer

  I stumbled across a new SSIS tool on Codeplex today, the SSIS Log Analyzer which was only released a few days ago. Whilst it is a beta release and currently only supports 2005 (2008 is promised) it looks quite interesting. It seems to be a fancy log viewer, but with some clever features and a nice looking front-end. I’ve only read the documentation so far, but it has graphs and a debug view that shows your package with the colour animations similar to when debugging in BIDS, and everyone knows, the way the pretty colours and numbers change is the best bit! I’ll quote some of the features for you here and then let you make your own mind up, is it useful in the real world? Option to analyze the logs manually by applying row and column filters over the log data or by using queries to specify more complex criterions. Automated Performance Analysis which provides a quick graphical look on which tasks spent most time during package execution. Rerun (debug) the entire sequence of events which happened during package execution showing the flow of control in graphical form, changes in runtime values for each task like execution duration etc. Support for Auto Analyzers to automatically find out issues and provide suggestions for problems which can be figured out with the help of SSIS logs and/or package. Option to analyze just log file or log and package together. Provides a lightweight environment to have a quick look at the package. Opening it in BIDS takes some time as being an authoring environment it does all sorts of validations resulting in some delay. See http://ssisloganalyzer.codeplex.com/  for more details.

  Read the article

• New SSIS tool on Codeplex – SSIS Log Analyzer

  I stumbled across a new SSIS tool on Codeplex today, the SSIS Log Analyzer which was only released a few days ago. Whilst it is a beta release and currently only supports 2005 (2008 is promised) it looks quite interesting. It seems to be a fancy log viewer, but with some clever features and a nice looking front-end. I’ve only read the documentation so far, but it has graphs and a debug view that shows your package with the colour animations similar to when debugging in BIDS, and everyone knows, the way the pretty colours and numbers change is the best bit! I’ll quote some of the features for you here and then let you make your own mind up, is it useful in the real world? Option to analyze the logs manually by applying row and column filters over the log data or by using queries to specify more complex criterions. Automated Performance Analysis which provides a quick graphical look on which tasks spent most time during package execution. Rerun (debug) the entire sequence of events which happened during package execution showing the flow of control in graphical form, changes in runtime values for each task like execution duration etc. Support for Auto Analyzers to automatically find out issues and provide suggestions for problems which can be figured out with the help of SSIS logs and/or package. Option to analyze just log file or log and package together. Provides a lightweight environment to have a quick look at the package. Opening it in BIDS takes some time as being an authoring environment it does all sorts of validations resulting in some delay. See http://ssisloganalyzer.codeplex.com/  for more details.

  Read the article

• SQL SERVER – Copy Column Headers from Resultset – SQL in Sixty Seconds #027 – Video

  - by pinaldave

  SQL Server Management Studio returns results in Grid View, Text View and to the file. When we copy results from Grid View to Excel there is a common complaint that the column  header displayed in resultset is not copied to the Excel. I often spend time in performance tuning databases and I run many DMV’s in SSMS to get a quick view of the server. In my case it is almost certain that I need all the time column headers when I copy my data to excel or any other place. SQL Server Management Studio have two different ways to do this. Method 1: Ad-hoc When result is rendered you can right click on the resultset and click on Copy Header. This will copy the headers along with the resultset. Additionally, you can use the shortcut key CTRL+SHIFT+C for coping column headers along with the resultset. Method 2: Option Setting at SSMS level This is SSMS level settings and I kept this option always selected as I often need the column headers when I select the resultset. Go Tools >> Options >> Query Results >> SQL Server >> Results to Grid >> Check the Box “Include column header when copying or saving the results.” Both of the methods are discussed in following SQL in Sixty Seconds Video. Here is the code used in the video. Related Tips in SQL in Sixty Seconds: Copy Column Headers in Query Analyzers in Result Set Getting Columns Headers without Result Data – SET FMTONLY ON If we like your idea we promise to share with you educational material. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video

  Read the article

• SQL SERVER – Copy Column Headers from Resultset – SQL in Sixty Seconds #026 – Video

  - by pinaldave

  SQL Server Management Studio returns results in Grid View, Text View and to the file. When we copy results from Grid View to Excel there is a common complaint that the column  header displayed in resultset is not copied to the Excel. I often spend time in performance tuning databases and I run many DMV’s in SSMS to get a quick view of the server. In my case it is almost certain that I need all the time column headers when I copy my data to excel or any other place. SQL Server Management Studio have two different ways to do this. Method 1: Ad-hoc When result is rendered you can right click on the resultset and click on Copy Header. This will copy the headers along with the resultset. Additionally, you can use the shortcut key CTRL+SHIFT+C for coping column headers along with the resultset. Method 2: Option Setting at SSMS level This is SSMS level settings and I kept this option always selected as I often need the column headers when I select the resultset. Go Tools >> Options >> Query Results >> SQL Server >> Results to Grid >> Check the Box “Include column header when copying or saving the results.” Both of the methods are discussed in following SQL in Sixty Seconds Video. Here is the code used in the video. Related Tips in SQL in Sixty Seconds: Copy Column Headers in Query Analyzers in Result Set Getting Columns Headers without Result Data – SET FMTONLY ON If we like your idea we promise to share with you educational material. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video

  Read the article

• Lucene and .NET Part I

  - by javarg

  I’ve playing around with Lucene.NET and trying to get a feeling of what was required to develop and implement a full business application using it. As you would imagine, many things are required for you to implement a robust solution for indexing content and searching it afterwards. Lucene is a great and robust solution for indexing content. It offers fast and performance enhanced search engine library available in Java and .NET. You will want to use this library in many particular scenarios: In Windows Azure, to support Full Text Search (a functionality not currently supported by SQL Azure) When storing files outside or not managed by your database (like in large document storage solutions that uses File System) When Full Text Search is not really what you need Lucene is more than a Full Text Search solution. It has several analyzers that let you process and search content in different ways (decomposing sentences, deriving words, removing articles, etc.). When deciding to implement indexing using Lucene, you will need to take into account the following: How content is to be indexed by Lucene and when. Using a service that runs after a specific interval Immediately when content changes When content is to available for searching / Availability of indexed content (as in real time content search) Immediately when content changes = near real time searching After a few minutes.. Ease of maintainability and development Some Technical Concerns.. When indexing content, indexes are locked for writing operations by the Index Writer. This means that Lucene is best designed to index content using single writer approach. When searching, Index Readers take a snapshot of indexes. This has the following implications: Setting up an index reader is a costly task. Your are not supposed to create one for each query or search. A good practice is to create readers and reuse them for several searches. The latter means that even when the content gets updated, you wont be able to see the changes. You will need to recycle the reader. In the second part of this post we will review some alternatives and design considerations.

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >