Search Results

Search found 3356 results on 135 pages for 'removing'.

Page 29/135 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Acer Aspire ASE700-UQ660A will not respond to power button

  - by Tim R.

  This is something of a continuation of this question. I am now completely unable to boot this computer. The last time I used it, I used hibernation mode. When I needed to use it again, it would not respond at all to the power button, keyboard, or mouse. I tried: Holding down the power button for 15 seconds pressing the power button Unplugging the power cord for 30 seconds, plugging it back in, and trying again Removing the motherboard battery for over a minute and reinstalling it Before removing the motherboard battery, none of the lights on the front of the computer lit up. After reinstalling the battery and plugging the power cord back in, the light behind the power button is constantly illuminated (without even pressing the power button), but there is still no response to the power button, no fans turned on, nothing else that would indicate that it is running. System: Acer Aspire ASE700-UQ660A (Specs should be all factory defaults except:) 4 GB RAM Nvidia GeForce 8600 GT with driver version 197.45 Windows 7 Professional 64 bit

  Read the article

• Windows Fax and Scan

  - by Scott

  I'm trying to setup Fax Server on Server 2008 R2. The role installs fine. However from Windows Fax and Scan - Tools - Fax Accounts... I am unable to setup an account. I get the following error. "There was a nerror in configuring the account. Please contact your administrator." I've tried a number of things including removing the Fax Server role and reinstalling. No change. Removing registry keys specified in other forums. No change. In my attempts today I at one point did have the fax printer installed but removed it while I was trying to get x64 and x32 drivers installed. Now I can't get it back. Any ideas?

  Read the article

• Problem with the hosts file in Windows XP

  - by Mee

  I have a computer with Windows XP SP2 with a weird problem. The hosts file doesn't work. No matter what I do, adding or removing entries in the file doesn't make any difference, pinging the added names times out. I tried flushing the DNS cache (using ipconfig /flushdns) but that didn't work, I even tried to restart the DNS client service but that made no difference too. Removing entries also has no effect, I ping the names and I get a reply. Help!!! Edit: Thanks for your answer guys, but the problem is more complicated than this. It seems I'll have to reinstall Windows.

  Read the article

• Remove LCD Stand for Wall Mounting - FSM-270YG

  - by Benjamin Chambers

  Based on Jeff Atwood's post on Coding Horror, I ordered one of these monitors, and I've been absolutely loving it. However, I recently (i.e. today) took the next step in monitor-y goodness and fastened the sucker to an articulated wall mount. Unfortunately, I can't figure out how to remove the stand. The flat portion comes off with a single screw, but the leg it fastens to has no apparent method of removing it. Has anyone figured out a trick for removing these, so they don't just stick out below the screen? Should I remove the screws from the backside of the screen, and look for an internal connection to remove? Or just give up and live with it? (After all, it's a great display, it's floating in the air in front of me, and the stand leg is only a minor annoyance).

  Read the article

• HAproxy roundrobin balancing does not appear to be distributing evently

  - by andrew

  Hello, I know that with loaded servers, roundrobin in HAproxy (1.4.4) does not evenly distribute, but my servers are currently getting NO traffic (test setup), and roundrobin balancing does www1,www1,www1,www1,www1,...www2,www2,www2,...,www1... I'm verifying this by having the script being run on each server cat /etc/HOSTNAME (slackware). I need to have it switch back and forth each time to test some session stuff (stored in shared memcached) but am having trouble getting it to switch between my two web servers on each request. global log 127.0.0.1 local0 warning maxconn 4096 chroot /usr/share/haproxy pidfile /var/run/haproxy.pid uid 99 gid 99 daemon defaults balance roundrobin fullconn 100 maxconn 4096 mode http option dontlognull option http-server-close option forwardfor option redispatch retries 3 timeout connect 5000 timeout client 20000 timeout server 60000 timeout queue 60000 stats enable stats uri /haproxy stats auth ***:*** frontend www *:80 log global acl is_upload hdr_dom(host) -i uploads.site.com acl is_api hdr_dom(host) -i api.site.com acl is_dev hdr_dom(host) -i dev.site.com acl is_apidev hdr_dom(host) -i apidev.site.com use_backend uploads.site.com if is_upload use_backend api.site.com if is_api use_backend dev.site.com if is_dev !is_apidev default_backend site.com backend site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend api.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:api.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend dev.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:dev.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 backend uploads.site.com option httpchk HEAD /alive.php HTTP/1.1\r\nHost:uploads.site.com server www1 1.1.1.1:8080 weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 server www2 1.1.1.2:8080 backup weight 10 minconn 5 maxconn 25 check inter 2000 rise 2 fall 2 So basically, I have some different back-ends (I've verified the ACLs are working), with the default option "roundrobin" selected. I've tried removing weights, removing the minconn/maxconn/fullconn attributes for all servers (not just the backend I'm testing), tried removing the ACLs, etc. I've been testing on dev.site.com BTW. Anyone see a reason why I can't get something like www1,www2,www1,www2,...? Also, this is one of my first questions on here, so please let me know if I left anything needed out of my post. Thanks!

  Read the article

• help setting up an IPSEC vpn from my linux box

  - by robthewolf

  I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

  Read the article

• Windows 7 Laptops "unable to find logon server"

  - by tombull89

  In the school I work in we have a large number (500+) of Windows 7 laptops on a Meru Wireless system and Server 2008 R2 Servers. We have an appalingly large failure rate where a student or staff member tries to logon (to the laptop joined to the domain) and is met by "There are currently no logon servers available to service the logon request". I've seen this question and this one and while removing and re-joining to the domain works, it's highly time consuming, irritating, and we (I) have more important things to concentrate on. The only MS KB article I can find is regarding a read-only domain controller (which ours isn't) and I'm at my wits end. Ultimately, is there a definitve cause and answer to this or am I stuck removing and re-joining the laptops?

  Read the article

• Ubuntu: disable udev's persistent-net-generator.rules

  - by Luke404

  I'm using Ubuntu 12.04 LTS server edition and I am modifying /etc/udev/rules.d/70-persistent-net.rules to define my own mappings of ethernet interfaces to MAC addresses; that file is initially generated by rules in /lib/udev/rules.d/75-persistent-net-generator.rules at system installation time (or at the first boot, I actually don't know and it doesn't matter here). How can I be sure that my edited version will never ever be overwritten by anything? Removing the persistent-net-generator, as suggested on some websites, is not the Right Thing™ to do as told by comments in the file itself: it will be overwritten by any update of the udev package. I'm looking for a more formally correct way to disable it. Is it enough to just make sure that /etc/udev/rules.d/70-persistent-net.rules does exist? Maybe there are other events that could trigger its regeneration? (eg. adding or removing ethernet interfaces to the system?)

  Read the article

• "service"-command and environment variables

  - by varesa

  I am trying to start a service that requires a env. variable to be set to certain path. I set this variable in "/etc/profile.d/". However when I start this service using the service command, it doesn't work. man service: service runs a System V init script in as predictable environment as possible, removing most environment variables and with current working directory set to /. So it seems that service is removing my variables. How should I set the variables up to keep them from being removed. Or is that something i should not do. I could start the service manually using the init-scripts, or even hardcode the path into the script, but I'd like to know how to use it with the service command.

  Read the article

• Why is the Python interpreter provided by Django suddenly showing me Python tab completion upon a single Tab press?

  - by ysim

  This issue seems to have just started happening; basically I just noticed that whenever I press the Tab key in the Python interpreter that comes with Django, it gives me the Display all ... possibilities? (y or no) prompt. I opened a similar question just now, where I noticed that removing set show-all-if-ambiguous on from .inputrc fixed the problem in the non-Django Python interpreter that was showing me bash tab completion, but the problem persists with the Django one, only with Python tab completion. It's very odd and it seems to have come out of nowhere. There's nothing else in my .inputrc other than set completion-ignore-case on, which shouldn't be conflicting with the Python interpreter, but I've also tried removing that (leaving my .inputrc blank), but it's still happening. I'm not sure why this is suddenly happening, but it would be great if someone had an idea of why and how to fix it.

  Read the article

• How to meet Windows 8 upgrade's 20 GB requirement on a 40 GB SSD with a 22 GB Windows 7 install?

  - by deryus

  A PC I have has Windows 7 installed on a 40 GB SSD, and I bought a Windows 8 upgrade for it. The current Windows folder on it however is 22 GB, that's after removing hibernation, turning off the pagefile and removing all extra programs/features. So even if I purge every other file and folder, the Windows folder itself takes more than half the disk. The PC also has a 1 TB HDD, but the upgrade installer didn't give me any options about choosing another drive. So, is my only option to reinstall Windows 7 on a larger drive, then proceed with the Windows 8 upgrade? Or is there anything I can remove from the Windows folder that while might be dangerous for long term usage, is fine for the few minutes I need to get Windows 8 installing?

  Read the article

• Problem with the hosts file in Windows XP

  - by waldev

  I have a computer with Windows XP SP2 with a weird problem. The hosts file doesn't work. No matter what I do, adding or removing entries in the file doesn't make any difference, pinging the added names times out. I tried flushing the DNS cache (using ipconfig /flushdns) but that didn't work, I even tried to restart the DNS client service but that made no difference too. Removing entries also has no effect, I ping the names and I get a reply. Help!!! Edit: Thanks for your answer guys, but the problem is more complicated than this. It seems I'll have to reinstall Windows.

  Read the article

• Remove folder structure from archive, ignore folder while archiving and fix error

  - by Michael

  I am trying to make a script to backup each of my plesk hosts to individual files, I am having two problems: I would like to remove the folder structure from archive, the tar is 3 folders deep I am getting this error: tar: Removing leading `/' from member names I need my archive to ignore folders named "catch" because I don't need them in my archive. The code: FILES=/var/www/vhosts/* FNAME="" for f in $FILES do FNAME=`basename $f` tar cfv "/root/backup/ftp/$FNAME.tar" $f done Sample output: tar: Removing leading `/' from member names /var/www/vhosts/mydomain.com/ /var/www/vhosts/mydomain.com/conf /var/www/vhosts/mydomain.com/etc/ /var/www/vhosts/mydomain.com/etc/group /var/www/vhosts/mydomain.com/etc/termcap /var/www/vhosts/mydomain.com/etc/passwd /var/www/vhosts/mydomain.com/usr/

  Read the article

• SharePoint 2010 - Access denied during ApplyWebConfigModifications()

  - by tcoalson

  I have SharePoint 2010 installed on a Windows Server 2008 R2 machine which is also hosting SQL Sever 2008 R2. I am attempting to deploy a solution that includes web parts in the 2010 environment that is working fine in MOSS 2007. The Web Part feature has a feature receiver that updates the web.config. When I try to activate the feature through the Site Collection Feature GUI, I receive an access denied message. I am logged on to the server and in SharePoint with the APP Pool account which is also a member of the domain administrator group, local administrator group and SharePoint Farm Admin group. This account is also dbo on SQL Server. This same feature activates fine using the stsadm command. I have dug into this issue at length and here is what I have found: Looking at the Microsoft assemblies in reflector, my error is coming from the SPWebApplication.ApplyWebConfigModifications() method. I can see the trace statements from SPWebConfigFileChanges.RemoveModificationsWebConfigXMLDocument and SPWebConfigFileChanges.ApplyModificationsWebConfigXMLDocument. The next line is a Save(str). Below is the output from the SharePoint logs that pertain to this error: Apply web config modifications to web app 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation General 8grn Medium WebConfigModification: Applying web config modifications to web app in server tw-s1-m4400-007 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 88gw Medium WebConfigModification: Applying web config modifications to file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/system.web/httpModules Node name add[@name='JivePageController'] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/system.web/httpHandlers Node name add[@path='ScriptResource.axd'] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name [local-name()="dependentAssembly"][/@name="System.Web.Extensions.Design"] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 887b Medium Removing web config node - Path configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name [local-name()="dependentAssembly"][/@name="System.Web.Extensions"] 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name - [local-name()="dependentAssembly"][/@name="System.Web.Extensions"] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/runtime/*[local-name()="assemblyBinding" and namespace-uri()="urn:schemas-microsoft-com:asm.v1"] Node name - [local-name()="dependentAssembly"][/@name="System.Web.Extensions.Design"] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/system.web/httpHandlers Node name - add[@path='ScriptResource.axd'] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8gp8 Medium WebConfigModification: Adding web config node - Path - configuration/system.web/httpModules Node name - add[@name='JivePageController'] Node value - in web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.09 w3wp.exe (0x15C4) 0x1444 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://tw-s1-m4400-007.jivedemo.local:32843/15702467ece1408f881abeabac3b5077/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: xxx MessageId: 'urn:uuid:4e859532-ed7f-4937-8b88-68d3af43d589' 9f403ede-2c94-490b-a05c-e169cc5fe58d 02/24/2010 16:05:41.10 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology f6kh High WebConfigModification: Save of web.config file C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config for applying modifications to web app SharePoint - 2008 failed. Error message - Access to the path 'C:\inetpub\wwwroot\wss\VirtualDirectories\2008\web.config' is denied. 5a817a37-7bf6-4d26-be51-207369e38f5b 02/24/2010 16:05:41.10 w3wp.exe (0x0F64) 0x1034 SharePoint Foundation Topology 8j2o High WebConfigModification: Changes not applied to web application SharePoint - 2008 with Url xxx 5a817a37-7bf6-4d26-be51-207369e38f5b Any help would be appreciated!

  Read the article

• Machine Check Exception

  - by Karl Entwistle

  When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

  Read the article

• dpkg E: Sub-process /usr/bin/dpkg returned an error

  - by user81269

  I decided to shift around my partitions on my hard drive for a fresh install of Kubuntu. I booted my Ubuntu 10.10 live disc, shifted everything around and attempted to install grub and it didn't work, so I burnt an Ubuntu 12.04 disc and installed it. I got the computer working and wanted to install some packages, but didn't have an internet connection at the time. So (I know this was stupid) I got some debs from previous versions of Ubuntu, as I needed my music, and the other install took a long of time to boot. Once I got my internet connection back, everything worked ok, for a little while. Then I stumbled upon this problem after removing ten broken packages using synaptic: drhax@Spamotard:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: libgtk2.0-cil 0 upgraded, 0 newly installed, 1 to remove and 417 not upgraded. 1 not fully installed or removed. After this operation, 2,638 kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 103052 files and directories currently installed.) Removing libgtk2.0-cil ... E: File does not exist: /usr/share/cli-common/packages.d/policy.2.6.gtk-dotnet.installcligac dpkg: error processing libgtk2.0-cil (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: libgtk2.0-cil E: Sub-process /usr/bin/dpkg returned an error code (1) Help would be appreciated. This is my first post, but I do know fair bit about Ubuntu, so feel free to point out any stupid mistakes I have made.

  Read the article

• unexpected EOF and end of document

  - by WASasquatch

  I have been fiddling with this code for a few days. Mind you I am a beginner. I just want to get my script to be able to download a remote file, and scan MineCraft plugins. I got the scan plugins to work, but I'm having two other issues. One, I can't get the mc_addplugin to work correctly, and I get a Unexpected EOF and unexpected end of document when running any other command besides mc_scanplugins or mc_start bash: -c: line 0: unexpected EOF while looking for matching `"' bash: -c: line 1: syntax error: unexpected end of file Help would be so much appreciated! Thanks in advance. #!/bin/bash # /etc/init.d/craftbukkit # version 0.9.1 2012-07-06 (YYYY-MM-DD) ### BEGIN INIT INFO # Provides: craftbukkit # Required-Start: $local_fs $remote_fs # Required-Stop: $local_fs $remote_fs # Should-Start: $network # Should-Stop: $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts craftbukkit server # Description: Starts and controls the craftbukkit server ### END INIT INFO # SETTINGS SERVICE='craftbukkit-1.2.5-R1.0.jar' OPTIONS='nogui' USERNAME='smith' # LIST ALL THE WORLDS IN YOUR CRAFTBUKKIT SERVER FOLDER WORLDS[1]='world' WORLDS[2]='world_nether' WORLDS[3]='world_the_end' WORLDS[4]='flat_world' MCPATH='/var/www/servers/Foundation' PLUGINSPATH='/var/www/servers/Foundation/plugins' TEMPPLUGINS='/var/www/servers/Foundationplugins/temp_plugins' BACKUPPATH='/var/www/servers/Foundation/backup' CPU_COUNT=2 INVOCATION="java -Xmx2024M -Xms2024M -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalPacing -XX:ParallelGCThreads=$CPU_COUNT -XX:+AggressiveOpts -jar $SERVICE $OPTIONS" ME=`whoami` as_user() { if [ $ME == $USERNAME ] ; then bash -c "$1" else su - $USERNAME -c "$1" fi } mc_start() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is already running!" else echo "Starting $SERVICE..." cd $MCPATH as_user "cd $MCPATH && screen -dmS craftbukkit $INVOCATION" sleep 7 if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is now running." else echo "Error! Could not start $SERVICE!" fi fi } mc_saveoff() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... suspending saves" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say The server is preforming a backup. Server going to read-only mode. Do not build...\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-off\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sync sleep 10 else echo "$SERVICE is not running. Not suspending saves." fi } mc_save() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... Saving worlds..." as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sync sleep 10 echo "Save complete!" else echo "$SERVICE is not running. Cannot save!" fi } mc_saveon() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running... re-enabling saves" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-on\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say Server backup has completed. Server going to read-write mode. You can now continue building...\"\015'" else echo "$SERVICE is not running. Not resuming saves." fi } mc_stop() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "Stopping $SERVICE" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"say $SERVERNAME is shutting down in 30 seconds! Please stop what you are doing. Check back later, we'll be back!\"\015'" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"save-all\"\015'" sleep 30 as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"stop\"\015'" sleep 7 else echo "$SERVICE was not running." fi if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "Error! $SERVICE could not be stopped." else echo "$SERVICE is stopped." fi } mc_update() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running! Will not start update." else MC_SERVER_URL=http://dl.bukkit.org/latest-rb/craftbukkit.jar as_user "cd $MCPATH && wget -q -O $MCPATH/craftbukkit_server.jar.update $MC_SERVER_URL" if [ -f $MCPATH/craftbukkit_server.jar.update ] then if `diff $MCPATH/$SERVICE $MCPATH/craftbukkit_server.jar.update >/dev/null` then echo "You are already running the latest version of $SERVICE. Update anyway? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $MCPATH/$SERVICE $MCPATH/${SERVICE}_old.jar" as_user "mv $MCPATH/craftbukkit_server.jar.update $MCPATH/$SERVICE" echo "$SERVICE updated successfully!"; break;; No ) echo "The update was not installed! Removing temporary files and exiting..." as_user "rm $MCPATH/craftbukkit_server.jar.update" exit;; esac done else as_user "mv $MCPATH/$SERVICE $MCPATH/${SERVICE}_old.jar" as_user "mv $MCPATH/craftbukkit_server.jar.update $MCPATH/$SERVICE" echo "$SERVICE updated successfully!" fi else echo "$SERVICE update could not be downloaded." fi fi } mc_addplugin() { if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running! Please stop the service before adding a plugin." else echo "Paste the URL to the .JAR Plugin..." read JARURL JARNAME=$(basename "$JARURL") if [ -d "$TEMPPLUGINS" ] then as_user "cd $PLUGINSPATH && wget -r -A.jar $JARURL -o temp_plugins/$JARNAME" else as_user "cd $PLUGINSPATH && mkdir $TEMPPLUGINS && wget -r -A.jar $JARURL -o temp_plugins/$JARNAME" fi if [ -f "$TMPDIR/$JARNAME" ] then if [ -f "$PLUGINSPATH/$JARNAME" ] then if `diff $PLUGINSPATH/$JARNAME $TMPDIR/$JARNAME >/dev/null` then echo "You are already running the latest version of $JARNAME." else NOW=`date "+%Y-%m-%d_%Hh%M"` echo "Are you sure you want to overwrite this plugin? [Y/n]" echo "Note: Your old plugin will be moved to the "$TEMPPLUGINS" folder with todays date." select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $PLUGINSPATH/$JARNAME $TEMPPLUGINS/${JARNAME}_${NOW} && mv $TEMPPLUGINS/$JARNAME $PLUGINSPATH/$JARNAME"; break;; No ) echo "The plugin has not been installed! Removing temporary plugin and exiting..." as_user "rm $TEMPPLUGINS/$JARNAME"; exit;; esac done echo "Would you like to start the $SERVICE now? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) mc_start; break;; No ) "$SERVICE not running! To start the service run: /etc/init.d/craftbukkit start"; exit;; esac done fi else echo "Are you sure you want to add this new plugin? [Y/n]" select yn in "Yes" "No"; do case $yn in Yes ) as_user "mv $PLUGINSPATH/$JARNAME $TEMPPLUGINS/${JARNAME}_${NOW} && mv $TEMPPLUGINS/$JARNAME $PLUGINSPATH/$JARNAME"; break;; No ) echo "The plugin has not been installed! Removing temporary plugin and exiting..." as_user "rm $TEMPPLUGINS/$JARNAME"; exit;; esac done echo "Would you like to start the $SERVICE now? [Y/n]?" select yn in "Yes" "No"; do case $yn in Yes ) mc_start; break;; No ) "$SERVICE not running! To start the service run: /etc/init.d/craftbukkit start"; exit;; esac done fi else echo "Failed to download the plugin from the URL you specified!" exit; fi fi } mc_scanplugins() { if [ "$(ls -A $PLUGINSPATH)" ] then shopt -s nullglob PLUGINS=($PLUGINSPATH/*.jar) i=1 for f in "${PLUGINS[@]}" do echo "${i}: $f" PLUGIN[$i]=$f i=$(( $i + 1 )) done echo "Enter the ID of a plugin you want removed, or any other key to cancel." read INPUT if [ ! -z "${INPUT##*[!0-9]*}" ] then if [ -f "${PLUGIN[INPUT]}" ] then echo "Removing plugin..." JAR=$(basename ${PLUGIN[INPUT]}) JARNAME=${JAR%.jar} as_user "rm -f ${PLUGIN[INPUT]}" sleep 2 as_user "cd $PLUGINSPATH && rm -rf ./${JARNAME}" if [ -f "${PLUGINSPATH}/${JARNAME}" ] then echo "Plugin folder could not be removed..." fi echo "Plugin removed." else echo "${PLUGIN[INPUT]}" echo "Invalid plugin! Does not exist! Canceling..." exit; fi else echo "Canceling..." exit; fi else echo "You have no plugins installed." exit; fi } mc_backup() { mc_saveoff for i in "${WORLDS[@]}"; do NOW=`date "+%Y-%m-%d_%Hh%M"` BACKUP_FILE="$BACKUPPATH/${i}_${NOW}.tar" echo "Backing up world: $i..." #as_user "cd $MCPATH && cp -r $i $BACKUPPATH/${i}_`date "+%Y.%m.%d_%H.%M""` as_user "tar -C \"$MCPATH\" -cf \"$BACKUP_FILE\" $i" done echo "Backing up $SERVICE" as_user "tar -C \"$MCPATH\" -rf \"$BACKUP_FILE\" $SERVICE" #as_user "cp \"$MCPATH/$SERVICE\" \"$BACKUPPATH/craftbukkit_server_${NOW}.jar\"" mc_saveon echo "Compressing backup..." as_user "tar -cvzf $BACKUPPATH/server_backup_${NOW}.tar.gz $MCPATH" echo "Backup has completed successfully." } mc_command() { command="$1"; if pgrep -u $USERNAME -f $SERVICE > /dev/null then pre_log_len=`wc -l "$MCPATH/server.log" | awk '{print $1}'` echo "$SERVICE is running... executing command" as_user "screen -p 0 -S craftbukkit -X eval 'stuff \"$command\"\015'" sleep .1 # assumes that the command will run and print to the log file in less than .1 seconds # print output tail -n $[`wc -l "$MCPATH/server.log" | awk '{print $1}'`-$pre_log_len] "$MCPATH/server.log" fi } #Start-Stop here case "$1" in start) mc_start ;; stop) mc_stop ;; restart) mc_stop mc_start ;; save) mc_save ;; update) mc_stop mc_backup mc_update mc_start ;; scanplugins) mc_scanplugins ;; addplugin) mc_addplugin ;; backup) mc_backup ;; status) if pgrep -u $USERNAME -f $SERVICE > /dev/null then echo "$SERVICE is running." else echo "$SERVICE is not running." fi ;; command) if [ $# -gt 1 ]; then shift mc_command "$*" else echo "Must specify server command (try 'help'?)" fi ;; *) echo "Usage: $0 {start|stop|update|backup|status|restart|command \"server command\"}" exit 1 ;; esac exit 0

  Read the article

• Suspending my laptop breaks ethernet over firewire, are there commands which can fix it?

  - by Josh

  As mentioned in this question I am using a firewire cable to provide a private network between my laptop and my desktop, because it makes using the screen sharing program synergy much nicer than using WIFI. However when I leave my office for the day and I suspend my laptop, when I return the next day, the desktop and the laptop cannot communicate over firewire anymore. The firewire0 device still has an IP address. but when I try and ping the desktop I get no route to host I'm using kernel 2.6.35-24-generic #42-Ubuntu SMP x86_64 on Ubuntu 10.10. Is there some way I can remedy this without a reboot? Like, removing some kernel modules and re-inserting them? Here's what I have tried so far and the results: root@token:~# dmesg|tail -n 1 [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 root@token:~# modprobe -r firewire_net firewire_ohci firewire_core root@token:~# modprobe -v firewire_ohci insmod /lib/modules/2.6.35-24-generic/kernel/lib/crc-itu-t.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-core.ko insmod /lib/modules/2.6.35-24-generic/kernel/drivers/firewire/firewire-ohci.ko root@token:~# dmesg|tail [592525.204024] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592563.410868] firewire_ohci: Removed fw-ohci device. [592579.160086] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [592579.160137] firewire_ohci: isochronous cycle inconsistent [592579.660294] firewire_core: created device fw0: GUID 0000000000000000, S400 [592579.663805] firewire_core: created device fw1: GUID 0017f2fffe89bce6, S400 [592579.663813] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700720] firewire_core: phy config: card 0, new root=ffc1, gap_count=5 [592579.700842] firewire_core: refreshed device fw0 [592579.702603] firewire_net: firewire0: IPv4 over FireWire on device 0000000000000000 root@token:~# ping stan.firewire PING stan.firewire (192.168.100.1) 56(84) bytes of data. From token.local (192.168.100.3) icmp_seq=1 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=2 Destination Host Unreachable From token.local (192.168.100.3) icmp_seq=3 Destination Host Unreachable I also tried removing the modules prior to suspending, and re-inserting after resuming. This did not work either :-(

  Read the article

• Package manager borked with gforge

  - by Leif Andersen

  I've been having a problem with the package manager. I seemed to have installed gforge, partially, but it keeps giving me errors whenever I install something. (Note that the thing I'm trying to install actually does get installed, but there is always an error returned). Here it is: Creating /etc/gforge/httpd.conf Creating /etc/gforge/httpd.secrets Creating /etc/gforge/local.inc Creating other includes invoke-rc.d: unknown initscript, /etc/init.d/postgresql-8.4 not found. dpkg: error processing gforge-db-postgresql (--configure): subprocess installed post-installation script returned error exit status 100 Errors were encountered while processing: gforge-db-postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) When I try to remove it with: sudo apt-get purge gforge-common I get this: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: gforge-common* gforge-db-postgresql* 0 upgraded, 0 newly installed, 2 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 5,853kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 717305 files and directories currently installed.) Removing gforge-db-postgresql ... Replacing config file /etc/postgresql/8.4/main/pg_hba.conf with new version invoke-rc.d: unknown initscript, /etc/init.d/postgresql-8.4 not found. dpkg: error processing gforge-db-postgresql (--purge): subprocess installed pre-removal script returned error exit status 100 Removing gforge-common ... Purging configuration files for gforge-common ... Processing triggers for man-db ... Errors were encountered while processing: gforge-db-postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) And it complains until I do a: sudo apt-get install -f At which point gforge is re-installed. I'm out of ideas, does anyone else have any other ideas with what might be wrong, and more importantly, how I can fix it? Thank you.

  Read the article

• Error with APE Server Installation

  - by sadmicrowave

  I was trying to install APE-Server from the .deb file at the ape-server homepage (www.ape-project.org) and I ran into an error so wanted to try removing the installation and reinstalling. I did a sudo apt-get remove ape-server which ran successfully but left ape-server folders in my /etc/ and /etc/init.d locations. Me being an idiot new comer to linux decided that manually delete those folders. Now when I reinstall the ape-server those folders don't get recreated and therefore I cannot send the /etc/init.d/ape-server [option] command because the folder is not found. When I try to sudo apt-get purge (or remove) ape-server I get the following sudo apt-get purge ape-server Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: ape-server* 0 upgraded, 0 newly installed, 1 to remove and 92 not upgraded. 1 not fully installed or removed. After this operation, 1,753kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 43924 files and directories currently installed.) Removing ape-server ... invoke-rc.d: unknown initscript, /etc/init.d/ape-server not found. dpkg: error processing ape-server (--purge): subprocess installed pre-removal script returned error exit status 100 update-rc.d: /etc/init.d/ape-server: file does not exist dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ape-server E: Sub-process /usr/bin/dpkg returned an error code (1) My question is; how do I remove all of the ape-server installation packages that were installed so I can reinstall from scratch?

  Read the article

• Upgrade to Ubuntu 13.10 in a VirtualBox: Gnome desktop not working

  - by Xavier

  I had Ubuntu 13.04 running in a VirtualBox (the host is WinXP). I've upgraded it to 13.10 but I've some issues: Gnome desktop is not working correctly (I can log in but the main menu bar remains empty - I can only log out with CTRL-ALT-BACKSPACE) I cannot build and install the VirtualBox Guest Addons: When trying to build it, it says: me@virtuntu:/etc/init.d$ sudo ./vboxadd setup Removing existing VirtualBox DKMS kernel modules ...done. Removing existing VirtualBox non-DKMS kernel modules ...done. Building the VirtualBox Guest Additions kernel modules The headers for the current running kernel were not found. If the following module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Doing non-kernel setup of the Guest Additions ...done. In the log file, I see the following error: /tmp/vbox.0/dirops.c:292:5: error: unknown field ‘readdir’ specified in initializer .readdir = sf_dir_read, ^ /tmp/vbox.0/dirops.c:292:5: warning: initialization from incompatible pointer type [enabled by default] /tmp/vbox.0/dirops.c:292:5: warning: (near initialization for ‘sf_dir_fops.flush’) [enabled by default] make[2]: *** [/tmp/vbox.0/dirops.o] Erreur 1 make[1]: *** [_module_/tmp/vbox.0] Erreur 2 make: *** [vboxsf] Erreur 2 Creating user for the Guest Additions. Anyone had a similar experience? Any clue to help me? Thanks a lot!

  Read the article

• Modernising settings, packages

  - by Sam Brightman

  The update manager (possibly combined with the janitor) does a reasonable job of bringing packages up to date with a new release, removing ones that are replaced by different projects etc. However, I'm left with the lingering feeling that quite a few settings are lingering from old releases. For example, some packages may be left around that I installed myself whereas now the functionality is provided by default. Another example is that my user doesn't get the new theme, and the panel bar is a mess. I can compare against an inactive user on the same system: everything seems tidier. There are also things like the explosion of System Preferences, user groups (inactive user, more recently created, is in groups that the older, active user isn't). In other areas (e.g. default font) I do seem to get given the new defaults. Another example is Spotlight-equivalent search. I remember Beagle and Tracker, I remember removing tracker when it used all system RAM and swap for 2 entire release cycles, but I don't know what I'm "supposed" to be using now. Is there even a default indexing-search installed and exposed? aptitude install ubuntu-desktop doesn't do anything, so the basics are in place package-wise. Is there any way to update my settings to the modern "Ubuntu way" without reinstalling from scratch? Can I do so selectively i.e. show the differences? Most of the time package management on Linux is an absolute joy compared to the alternatives, but if the desktop gets messed up after only a release or two, we're back to reinstalling just like Windows.

  Read the article

• How to force remove a package if dpkg removal script fails?

  - by fodon

  I'm trying to remove a package where I deleted the /etc/init.d/disco-master file (in an attempt to remove the package manually). I want to remove the disco-master package. How do I do this now? This is what happens when I do sudo apt-get remove disco-master: removing disco-master ... invoke-rc.d: unknown initscript, /etc/init.d/disco-master not found. dpkg: error processing disco-master (--remove): subprocess installed pre-removal script returned error exit status 100 Errors were encountered while processing: disco-master E: Sub-process /usr/bin/dpkg returned an error code (1) When I do sudo apt-get install --reinstall disco-master I get the following: You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: disco-master : Depends: disco-node (= 0.4.2+nmu1) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I do sudo apt-get -f install I get this: Unpacking disco-node (from .../disco-node_0.4.2+nmu1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/disco-node_0.4.2+nmu1_amd64.deb (--unpack): trying to overwrite '/usr/lib/disco/master/ebin/disco.app', which is also in package disco-master 0.4.1 No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/disco-node_0.4.2+nmu1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) When I run sudo apt-get remove disco-node I get the following: Package disco-node is not installed, so not removed You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: disco-master : Depends: disco-node (= 0.4.1) but it is not going to be installed Depends: python-disco (= 0.4.1) but 0.4.2+nmu1 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). When I did sudo dpkg -P --force-all disco-master I got: Removing disco-master ... invoke-rc.d: unknown initscript, /etc/init.d/disco-master not found. dpkg: error processing disco-master (--purge): subprocess installed pre-removal script returned error exit status 100 Errors were encountered while processing: disco-master

  Read the article

• computer shows up twice, connection unknown

  - by Thomas G. Seroogy

  added two computers to Ubuntu One. One machine is windows. The windows version seems to work fine, and I started syncing a folder by placing it into the Ubuntu One folder. All files and folders are visible when I go to my account online. On Ubuntu machine. I selected to sync the Download folder. Shortly thereafter, I realized that one folder exceeded my storage max. I tried to un-sync the folder, but Ubuntu One and the Stop Syncing This Folder were not visible in the menu. Per Ubuntu instructions, I removed my Ubuntu computer from the list of syncing computers. Per Ubuntu instructions, I re-added the Ubuntu computer. However, I find that two computers by the same name are added on both the desktop app and on the web. Plus, I the connection is "unknown." I have removed and re-added the computer several times with the same results. In all cases, I remove the computers using the Ubuntu One desktop app, then removing them from my account on the web, removing the Ubuntu One password, and restart the Ubuntu One app. Problem remains. Thanks in advance for any replies and help.

  Read the article

• Fixing dpkg after installation of broken packages? [closed]

  - by Amith KK

  Possible Duplicate: How to remove all associated files and configuration settings of an app installed through 'force architecture' command I installed a broken package, and now apt-get/aptitude is failing with trying to remove it Each time I run a apt operation, this is the message I get: Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) running sudo apt-get install -f gives me this: amith@amith-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: crossplatformui 0 upgraded, 0 newly installed, 1 to remove and 1123 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 340804 files and directories currently installed.) Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >