Search Results

Search found 848 results on 34 pages for 'robust'.

Page 29/34 | < Previous Page | 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • Exitus Acta Probat: The Post-Processing Module

    - by Phil Factor
    Sometimes, one has to make certain ethical compromises to ensure the success of a corporate IT project. Exitus Acta Probat (literally 'the result validates the deeds' meaning that the ends justify the means)It was a while back, whilst working as a Technical Architect for a well-known international company, that I was given the task of designing the architecture of a rather specialized accounting system. We'd tried an off-the-shelf (OTS) Windows-based solution which crashed with dispiriting regularity, and didn't quite do what the business required. After a great deal of research and planning, we commissioned a Unux-based system that used X-terminals for the desktops of  the participating staff. X terminals are now obsolete, but were then hot stuff; stripped-down Unix workstations that provided client GUIs for networked applications long before the days of AJAX, Flash, Air and DHTML. I've never known a project go so smoothly: I'd been initially rather nervous about going the Unix route, believing then that  Unix programmers were excitable creatures who were prone to  indulge in role-play enactments of elves and wizards at the weekend, but the programmers I met from the company that did the work seemed to be rather donnish, earnest, people who quickly grasped our requirements and were faultlessly professional in their work.After thinking lofty thoughts for a while, there was considerable pummeling of keyboards by our suppliers, and a beautiful robust application was delivered to us ahead of dates.Soon, the department who had commissioned the work received shiny new X Terminals to replace their rather depressing lavatory-beige PCs. I modestly hung around as the application was commissioned and deployed to the department in order to receive the plaudits. They didn't come. Something was very wrong with the project. I couldn't put my finger on the problem, and the users weren't doing any more than desperately and futilely searching the application to find a fault with it.Many times in my life, I've come up against a predicament like this: The roll-out of an application goes wrong and you are hearing nothing that helps you to discern the cause but nit-*** noise. There is a limit to the emotional heat you can pack into a complaint about text being in the wrong font, or an input form being slightly cramped, but they tried their best. The answer is, of course, one that every IT executive should have tattooed prominently where they can read it in emergencies: In Vino Veritas (literally, 'in wine the truth', alcohol loosens the tongue. A roman proverb) It was time to slap the wallet and get the department down the pub with the tab in my name. It was an eye-watering investment, but hedged with an over-confident IT director who relished my discomfort. To cut a long story short, The real reason gushed out with the third round. We had deprived them of their PCs, which had been good for very little from the pure business perspective, but had provided them with many hours of happiness playing computer-based minesweeper and solitaire. There is no more agreeable way of passing away the interminable hours of wage-slavery than minesweeper or solitaire, and the employees had applauded the munificence of their employer who had provided them with the means to play it. I had, unthinkingly, deprived them of it.I held an emergency meeting with our suppliers the following day. I came over big with the notion that it was in their interests to provide a solution. They played it cool, probably knowing that it was my head on the block, not theirs. In the end, they came up with a compromise. they would temporarily descend from their lofty, cerebral stamping grounds  in order to write a server-based Minesweeper and Solitaire game for X Terminals, and install it in a concealed place within the system. We'd have to pay for it, though. I groaned. How could we do that? "Could we call it a 'post-processing module?" suggested their account executive.And so it came to pass. The application was a resounding success. Every now and then, the staff were able to indulge in some 'post-processing', with what turned out to be a very fine implementation of both minesweeper and solitaire. There were several refinements: A single click in a 'boss' button turned the games into what looked just like a financial spreadsheet.  They even threw in a multi-user version of Battleships. The extra payment for the post-processing module went through the change-control process without anyone untoward noticing, and peace once more descended. Only one thing niggles. Those games were good. Do they still survive, somewhere in a Linux library? If so, I'd like to claim a small part in their production.

    Read the article

  • Retrieve Performance Data from SOA Infrastructure Database

    - by fip
    My earlier blog posting shows how to enable, retrieve and interpret BPEL engine performance statistics to aid performance troubleshooting. The strength of BPEL engine statistics at EM is its break down per request. But there are some limitations with the BPEL performance statistics mentioned in that blog posting: The statistics were stored in memory instead of being persisted. To avoid memory overflow, the data are stored to a buffer with limited size. When the statistic entries exceed the limitation, old data will be flushed out to give ways to new statistics. Therefore it can only keep the last X number of entries of data. The statistics 5 hour ago may not be there anymore. The BPEL engine performance statistics only includes latencies. It does not provide throughputs. Fortunately, Oracle SOA Suite runs with the SOA Infrastructure database and a lot of performance data are naturally persisted there. It is at a more coarse grain than the in-memory BPEL Statistics, but it does have its own strengths as it is persisted. Here I would like offer examples of some basic SQL queries you can run against the infrastructure database of Oracle SOA Suite 11G to acquire the performance statistics for a given period of time. You can run it immediately after you modify the date range to match your actual system. 1. Asynchronous/one-way messages incoming rates The following query will show number of messages sent to one-way/async BPEL processes during a given time period, organized by process names and states select composite_name composite, state, count(*) Count from dlv_message where receive_date >= to_timestamp('2012-10-24 21:00:00','YYYY-MM-DD HH24:MI:SS') and receive_date <= to_timestamp('2012-10-24 21:59:59','YYYY-MM-DD HH24:MI:SS') group by composite_name, state order by Count; 2. Throughput of BPEL process instances The following query shows the number of synchronous and asynchronous process instances created during a given time period. It list instances of all states, including the unfinished and faulted ones. The results will include all composites cross all SOA partitions select state, count(*) Count, composite_name composite, component_name,componenttype from cube_instance where creation_date >= to_timestamp('2012-10-24 21:00:00','YYYY-MM-DD HH24:MI:SS') and creation_date <= to_timestamp('2012-10-24 21:59:59','YYYY-MM-DD HH24:MI:SS') group by composite_name, component_name, componenttype order by count(*) desc; 3. Throughput and latencies of BPEL process instances This query is augmented on the previous one, providing more comprehensive information. It gives not only throughput but also the maximum, minimum and average elapse time BPEL process instances. select composite_name Composite, component_name Process, componenttype, state, count(*) Count, trunc(Max(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MaxTime, trunc(Min(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MinTime, trunc(AVG(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) AvgTime from cube_instance where creation_date >= to_timestamp('2012-10-24 21:00:00','YYYY-MM-DD HH24:MI:SS') and creation_date <= to_timestamp('2012-10-24 21:59:59','YYYY-MM-DD HH24:MI:SS') group by composite_name, component_name, componenttype, state order by count(*) desc;   4. Combine all together Now let's combine all of these 3 queries together, and parameterize the start and end time stamps to make the script a bit more robust. The following script will prompt for the start and end time before querying against the database: accept startTime prompt 'Enter start time (YYYY-MM-DD HH24:MI:SS)' accept endTime prompt 'Enter end time (YYYY-MM-DD HH24:MI:SS)' Prompt "==== Rejected Messages ===="; REM 2012-10-24 21:00:00 REM 2012-10-24 21:59:59 select count(*), composite_dn from rejected_message where created_time >= to_timestamp('&&StartTime','YYYY-MM-DD HH24:MI:SS') and created_time <= to_timestamp('&&EndTime','YYYY-MM-DD HH24:MI:SS') group by composite_dn; Prompt " "; Prompt "==== Throughput of one-way/asynchronous messages ===="; select state, count(*) Count, composite_name composite from dlv_message where receive_date >= to_timestamp('&StartTime','YYYY-MM-DD HH24:MI:SS') and receive_date <= to_timestamp('&EndTime','YYYY-MM-DD HH24:MI:SS') group by composite_name, state order by Count; Prompt " "; Prompt "==== Throughput and latency of BPEL process instances ====" select state, count(*) Count, trunc(Max(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MaxTime, trunc(Min(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) MinTime, trunc(AVG(extract(day from (modify_date-creation_date))*24*60*60 + extract(hour from (modify_date-creation_date))*60*60 + extract(minute from (modify_date-creation_date))*60 + extract(second from (modify_date-creation_date))),4) AvgTime, composite_name Composite, component_name Process, componenttype from cube_instance where creation_date >= to_timestamp('&StartTime','YYYY-MM-DD HH24:MI:SS') and creation_date <= to_timestamp('&EndTime','YYYY-MM-DD HH24:MI:SS') group by composite_name, component_name, componenttype, state order by count(*) desc;  

    Read the article

  • Oracle Business Intelligence Advanced - Hands-on Workshop para Parceiros - 18 a 21 de Janeiro

    - by Claudia Costa
    Workshop Description This FREE hands-on workshop highlights strengths of OBIEE 11g by providing attendees a hands-on experience with BI 11g product. OBIEE 11g has adopted the standardized infrastructure of Fusion Middleware to provide robust server capability along with highly anticipated advanced visualization components like Maps, Flash based charts, Scorecards and KPIs. This workshop focuses on new features and infrastructure components for the BI practitioners who are familiar with either OBIEE 10g or previous BI releases. After taking this course, Oracle Business Intelligence 11g Advanced, you will gain insight into OBIEE11g technology, reporting solutions and new features. Workshop provides opportunities to practice with OBIEE11g environment as hands on activities. Participant will gain in-depth understanding of new architecture of OBIEE 11g, security mode, installation/configuration as well as reporting aspects like, new ROLAP/MOLAP style hierarchical browsing, new chart types, Action Framework and Advanced Visualization. If you are a Business Intelligence practitioners and familiar with BI10g - you cannot afford to miss this 3-day workshop. Register Now! PresentationsBusiness Intelligence EE (OBIEE) 11g: Advanced Workshop ·         OBIEE 11g Overview ·         OBIEE 11g Architecture and Infrastructure ·         OBIEE 11g Installation, Configuration and Monitoring ·         OBIEE11g Security Model and BI Components ·         OBIEE 11g Homepage Overview ·         New Visualizations: Master-Detail Events, Charts, Hierarchies ·         Reports Building with OBIEE 11g and Catalog Management ·         Spatial Integration, Action Framework, Scorecards ·         OBIEE 11g Dashboards ·         OBIEE Integration Options  Lab OutlineOracle Business Intelligence (OBIEE) 11g: Advanced Workshop The labs enable OBIEE Core functionality through hands-on activities are based on a Oracle VirtualBox image with software and training samples pre-installed. This Advanced course has few labs optional during the workshop to allow for students to practice them on their own. The primary purpose of the workshop is to provide expertise of 11g features and infrastructure changes from 10g. Labs will allow you to explore concepts to: ·         Have a clear understanding of the OBIEE 11g architecture ·         Have a clear understanding of the OBIEE differentiators ·         OBIEE11g Security Model ·         OBIEE11g Environment Management ·         Report Building with OBIEE11g ·         OBIEE11g Dashboard and Homepage Environment ·         New Visualization features ·         Management of Reports, Dashboards and BI Catalog Objects Audience ·         Business Intelligence Evangelist ·         Business Intelligence Application Developer or Consultant ·         Data Warehouse Developer ·         Enterprise Architects ·         Industry Solutions Architects Prerequisites ·         Experience and Understanding of OBIEE 10g is required. ·         Good understanding of data modeling for reporting purpose ·         Strong experience with database technologies preferred Equipment RequirementsThis workshop requires attendees to provide their own laptops. Attendee laptops must meet the following minimum hardware/software requirements: OBIEE 11g environments requires at least 3 GB of RAM (4GB Preferred), without which student will not be able to complete labs. This workshop has environment that includes VM Image and also a software components that students will install on their laptop for the labs. ·         Minimum 3GB RAM. 25GB free disk space ·         Internet Explorer 7 ·         VirtualBox (the latest version) ·         Downloadable from http://www.virtualbox.org ·         WINRAR or 7zip ·         Downloadable from http://www.win-rar.com/download.html ·         Downloadable from http://www.7zip.com/ Attendees will be given a VirtualBox image for Oraclee BI 11g Workshop containing the software along with required toolset, database and data sets for the labs. AgendaThis class duration is 3 Days9:00am: Sign-in and Technical Set up9:30am : Workshop Starts5:00pm : Workhop Ends LocalHotel Holiday Inn Express - Porto Salvo - Lisboa This class is Free. Register early to confirm a seat! Oracle BI Advanced 11g Hands-on Workshop - Schedule Register Now! January 11-13, 2011: Kista, Sweden January 18-20, 2011: Lisbon, Portugal March 1-3, 2011: Reading, Berkshire, UK March 15-17, 2011: Colombes, Paris, France March 29-31, 2011: Amsterdam, Netherlands Questions? For registration questions please send an email to [email protected]. Para outras informações, por favor contacte Claudia Costa, telf: 214235027 ou pelo email   

    Read the article

  • Windows 7 doesn't boot after Ubuntu install

    - by Omu
    I had windows 7 installed on my pc, then I installed Ubuntu 10.10/ During the installation process I have chosen to manually set my partitions: I set a 10GB drive for ubuntu root 1GB drive for swap and for boot drive I've chosen the one used by windows 7 Now I can boot ubuntu, I have the windows 7 option in the boot list, but when I choose Windows 7, it shows me a black screen for a second and returns back to boot screen. Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== = Windows is installed in the MBR of /dev/sda sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Grub 2 Boot sector info: Grub 2 is installed in the boot sector of sda1 and looks at sector 304908237 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sda3: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda4: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 63 62,894,474 62,894,412 7 HPFS/NTFS /dev/sda2 62,894,478 291,579,749 228,685,272 7 HPFS/NTFS /dev/sda3 291,579,811 309,157,937 17,578,127 5 Extended /dev/sda5 291,579,813 309,157,937 17,578,125 83 Linux /dev/sda4 309,159,936 312,580,095 3,420,160 82 Linux swap / Solaris blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 1266BB2766BB0A8D ntfs /dev/sda2 BEDBF1147C76F703 ntfs DATA /dev/sda3: PTTYPE="dos" /dev/sda4 dd38226d-c7c9-4ae5-a726-6d18d34a22e4 swap /dev/sda5 e1dafd1c-f855-406b-8f9a-f9d527c70255 ext4 /dev/sda: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 1266bb2766bb0a8d chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda5 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda4 during installation UUID=dd38226d-c7c9-4ae5-a726-6d18d34a22e4 none swap sw 0 0 =================== sda5: Location of files loaded by Grub: =================== 156.1GB: boot/grub/core.img 156.3GB: boot/grub/grub.cfg 149.9GB: boot/initrd.img-2.6.35-22-generic 156.3GB: boot/vmlinuz-2.6.35-22-generic 149.9GB: initrd.img 156.3GB: vmlinuz

    Read the article

  • Big Data – Buzz Words: What is Hadoop – Day 6 of 21

    - by Pinal Dave
    In yesterday’s blog post we learned what is NoSQL. In this article we will take a quick look at one of the four most important buzz words which goes around Big Data – Hadoop. What is Hadoop? Apache Hadoop is an open-source, free and Java based software framework offers a powerful distributed platform to store and manage Big Data. It is licensed under an Apache V2 license. It runs applications on large clusters of commodity hardware and it processes thousands of terabytes of data on thousands of the nodes. Hadoop is inspired from Google’s MapReduce and Google File System (GFS) papers. The major advantage of Hadoop framework is that it provides reliability and high availability. What are the core components of Hadoop? There are two major components of the Hadoop framework and both fo them does two of the important task for it. Hadoop MapReduce is the method to split a larger data problem into smaller chunk and distribute it to many different commodity servers. Each server have their own set of resources and they have processed them locally. Once the commodity server has processed the data they send it back collectively to main server. This is effectively a process where we process large data effectively and efficiently. (We will understand this in tomorrow’s blog post). Hadoop Distributed File System (HDFS) is a virtual file system. There is a big difference between any other file system and Hadoop. When we move a file on HDFS, it is automatically split into many small pieces. These small chunks of the file are replicated and stored on other servers (usually 3) for the fault tolerance or high availability. (We will understand this in the day after tomorrow’s blog post). Besides above two core components Hadoop project also contains following modules as well. Hadoop Common: Common utilities for the other Hadoop modules Hadoop Yarn: A framework for job scheduling and cluster resource management There are a few other projects (like Pig, Hive) related to above Hadoop as well which we will gradually explore in later blog posts. A Multi-node Hadoop Cluster Architecture Now let us quickly see the architecture of the a multi-node Hadoop cluster. A small Hadoop cluster includes a single master node and multiple worker or slave node. As discussed earlier, the entire cluster contains two layers. One of the layer of MapReduce Layer and another is of HDFC Layer. Each of these layer have its own relevant component. The master node consists of a JobTracker, TaskTracker, NameNode and DataNode. A slave or worker node consists of a DataNode and TaskTracker. It is also possible that slave node or worker node is only data or compute node. The matter of the fact that is the key feature of the Hadoop. In this introductory blog post we will stop here while describing the architecture of Hadoop. In a future blog post of this 31 day series we will explore various components of Hadoop Architecture in Detail. Why Use Hadoop? There are many advantages of using Hadoop. Let me quickly list them over here: Robust and Scalable – We can add new nodes as needed as well modify them. Affordable and Cost Effective – We do not need any special hardware for running Hadoop. We can just use commodity server. Adaptive and Flexible – Hadoop is built keeping in mind that it will handle structured and unstructured data. Highly Available and Fault Tolerant – When a node fails, the Hadoop framework automatically fails over to another node. Why Hadoop is named as Hadoop? In year 2005 Hadoop was created by Doug Cutting and Mike Cafarella while working at Yahoo. Doug Cutting named Hadoop after his son’s toy elephant. Tomorrow In tomorrow’s blog post we will discuss Buzz Word – MapReduce. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • SQL SERVER – Number-Crunching with SQL Server – Exceed the Functionality of Excel

    - by Pinal Dave
    Imagine this. Your users have developed an Excel spreadsheet that extracts data from your SQL Server database, manipulates that data through the use of Excel formulas and, possibly, some VBA code which is then used to calculate P&L, hedging requirements or even risk numbers. Management comes to you and tells you that they need to get rid of the spreadsheet and that the results of the spreadsheet calculations need to be persisted on the database. SQL Server has a very small set of functions for analyzing data. Excel has hundreds of functions for analyzing data, with many of them focused on specific financial and statistical calculations. Is it even remotely possible that you can use SQL Server to replace the complex calculations being done in a spreadsheet? Westclintech has developed a library of functions that match or exceed the functionality of Excel’s functions and contains many functions that are not available in EXCEL. Their XLeratorDB library of functions contains over 700 functions that can be incorporated into T-SQL statements. XLeratorDB takes advantage of the SQL CLR architecture introduced in SQL Server 2005. SQL CLR permits managed code to be compiled into the database and run alongside built-in SQL Server functions like COUNT or SUM. The Westclintech developers have taken advantage of this architecture to bring robust analytical functions to the database. In our hypothetical spreadsheet, let’s assume that our users are using the YIELD function and that the data are extracted from a table in our database called BONDS. Here’s what the spreadsheet might look like. We go to column G and see that it contains the following formula. Obviously, SQL Server does not offer a native YIELD function. However, with XLeratorDB we can replicate this calculation in SQL Server with the following statement: SELECT *, wct.YIELD(CAST(GETDATE() AS date),Maturity,Rate,Price,100,Frequency,Basis) AS YIELD FROM BONDS This produces the following result. This illustrates one of the best features about XLeratorDB; it is so easy to use. Since I knew that the spreadsheet was using the YIELD function I could use the same function with the same calling structure to do the calculation in SQL Server. I didn’t need to know anything at all about the mechanics of calculating the yield on a bond. It was pretty close to cut and paste. In fact, that’s one way to construct the SQL. Just copy the function call from the cell in the spreadsheet and paste it into SMS and change the cell references to column names. I built the SQL for this query by starting with this. SELECT * ,YIELD(TODAY(),B2,C2,D2,100,E2,F2) FROM BONDS I then changed the cell references to column names. SELECT * --,YIELD(TODAY(),B2,C2,D2,100,E2,F2) ,YIELD(TODAY(),Maturity,Rate,Price,100,Frequency,Basis) FROM BONDS Finally, I replicated the TODAY() function using GETDATE() and added the schema name to the function name. SELECT * --,YIELD(TODAY(),B2,C2,D2,100,E2,F2) --,YIELD(TODAY(),Maturity,Rate,Price,100,Frequency,Basis) ,wct.YIELD(GETDATE(),Maturity,Rate,Price,100,Frequency,Basis) FROM BONDS Then I am able to execute the statement returning the results seen above. The XLeratorDB libraries are heavy on financial, statistical, and mathematical functions. Where there is an analog to an Excel function, the XLeratorDB function uses the same naming conventions and calling structure as the Excel function, but there are also hundreds of additional functions for SQL Server that are not found in Excel. You can find the functions by opening Object Explorer in SQL Server Management Studio (SSMS) and expanding the Programmability folder under the database where the functions have been installed. The  Functions folder expands to show 3 sub-folders: Table-valued Functions; Scalar-valued functions, Aggregate Functions, and System Functions. You can expand any of the first three folders to see the XLeratorDB functions. Since the wct.YIELD function is a scalar function, we will open the Scalar-valued Functions folder, scroll down to the wct.YIELD function and and click the plus sign (+) to display the input parameters. The functions are also Intellisense-enabled, with the input parameters displayed directly in the query tab. The Westclintech website contains documentation for all the functions including examples that can be copied directly into a query window and executed. There are also more one hundred articles on the site which go into more detail about how some of the functions work and demonstrate some of the extensive business processes that can be done in SQL Server using XLeratorDB functions and some T-SQL. XLeratorDB is organized into libraries: finance, statistics; math; strings; engineering; and financial options. There is also a windowing library for SQL Server 2005, 2008, and 2012 which provides functions for calculating things like running and moving averages (which were introduced in SQL Server 2012), FIFO inventory calculations, financial ratios and more, without having to use triangular joins. To get started you can download the XLeratorDB 15-day free trial from the Westclintech web site. It is a fully-functioning, unrestricted version of the software. If you need more than 15 days to evaluate the software, you can simply download another 15-day free trial. XLeratorDB is an easy and cost-effective way to start adding sophisticated data analysis to your SQL Server database without having to know anything more than T-SQL. Get XLeratorDB Today and Now! Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Excel

    Read the article

  • SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition

    - by Greg Mally
    Overview Many web service developers use soapUI for various tests like: smoke test, unit test, and load testing because you can get a free edition that is fairly robust. However, if you need to venture into more complex testing that requires a dynamic payload, then the free edition doesn't necessarily make it easy. This feature does exist in soapUI, but for obvious reasons it is in the Pro version. In this blog I will show you how to use soapUI free edition for dynamic payloads in a simplified example. Hopefully this will open the doors for you to expand into more complex scenarios. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/. Additionally, we will be using asynchronous web services and you can review the setup for this in my blog: SOA Suite 11g Asynchronous Testing with soapUI. Features in soapUI Free Edition Relating to this Topic The soapUI test tool provides a very feature rich environment that can do many things provided you are willing to go beyond point and click. For this example, we will be leveraging just a couple features for our dynamic payload example: Test Case Properties Scripting with Groovy Basically, we will be using a property as a global variable and we will manipulate that property using a Groovy script. Setting Up Our Property Properties are available throughout soapUI and here is a snippet from the soapUI website defining the locations: Projects : for handling Project scope values, for example a subscription ID TestSuite : for handling TestSuite scoped values, can be seen as "arguments" to a TestSuite TestCases : for handling TestCase scoped values, can be seen as "arguments" to a TestCase Properties TestStep : for providing local values/state within a TestCase Local TestStep properties : several TestStep types maintain their own list of properties specific to their functionality : DataSource, DataSink, Run TestCase MockServices : for handling MockService scoped values/arguments MockResponses : for handling MockResponse scoped values Global Properties : for handling Global properties, optionally from an external source For our example, we will be defining a custom property in a TestCase called SimpleAsyncPayload. The property can be created in either the Custom Properties tab located at the bottom of the Navigator panel when the TestCase is selected in the Navigator or the Properties label in the TestCase editor: Navigator Panel TestCase Editor You will notice that I set a value of “0” for the custom property. For this simplified example, we will need to retrieve that value and manipulate it prior to making the web service request invocation. In order to accomplish this, we will need to get Groovy ;) Let's Get Groovy We will now add a new Groovy Script step to the TestCase called Manipulate Payload: TestCase Editor > Append Step > Groovy Script Once we have added the Groovy Script step to our TestCase, we can open the Groovy Script editor to add the code to: Get the current value of the property we created called SimpleAsyncPayload. Convert the value of the property to an integer. Increment the value. Store the incremented value back into the TestCase property called SimpleAsyncPayload. The script should look something like the following: Groovy Script Editor – Manipulate Payload At this point we can test the script to see if it is working by simply running the TestCase (left-click on the green triangle in the upper left-hand corner of the TestCase editor). To verify if it ran correctly, we can look at the value of the SimpleAsyncPayload property which should now be 1: TestCase Editor – Run Results All that is left to complete the TestCase is to append another step of type Test Request. The information required to append the request is a name and an operation to invoke. In this example we will use the default name and select the SimpleAsyncBPELProcessBingd -> process as the operation (any other information being requested, simply use the defaults unless you are calling an asynchronous operation then do not add any assertions). We are now in familiar ground with the Test Request editor. Depending upon the type of operation you are invoking (synchronous or asynchronous), please update the request with the necessary information (e.g., callback information for asynchronous operations). We will now tweak the Test Request payload to retrieve the value of the SimpleAsyncPayload property. The soapUI editor makes this very simple: right-click in the payload and navigate to the property (e.g., right-click > Get Data.. > TestCase: [Groovy TestCase] > Property [SimpleAsyncPayload]): Test Request Editor – Insert Property Value Your payload should now look something like the following: Test Request Editor – Inserted Property Value Just like before, we are now ready to run the TestCase. If everything goes as expected we should see a response like the following: Message Viewer – Results of TestCase Run We are now setup to be able to run a stress test where the payload will change for each request. This simple example can be expanded to include multiple payload values, complex calculations in the scripts, or whatever can be done via the soapUI scripting. Hopefully you have found this useful and happy testing to you :)

    Read the article

  • Imaging: Paper Paper Everywhere, but None Should be in Sight

    - by Kellsey Ruppel
    Author: Vikrant Korde, Technical Architect, Aurionpro's Oracle Implementation Services team My wedding photos are stored in several empty shoeboxes. Yes...I got married before digital photography was mainstream...which means I'm old. But my parents are really old. They have shoeboxes filled with vacation photos on slides (I doubt many of you have even seen a home slide projector...and I hope you never do!). Neither me nor my parents should have shoeboxes filled with any form of photographs whatsoever. They should obviously live in the digital world...with no physical versions in sight (other than a few framed on our walls). Businesses grapple with similar challenges. But instead of shoeboxes, they have file cabinets and warehouses jam packed with paper invoices, legal documents, human resource files, material safety data sheets, incident reports, and the list goes on and on. In fact, regulatory and compliance rules govern many industries, requiring that this paperwork is available for any number of years. It's a real challenge...especially trying to find archived documents quickly and many times with no backup. Which brings us to a set of technologies called Image Process Management (or simply Imaging or Image Processing) that are transforming these antiquated, paper-based processes. Oracle's WebCenter Content Imaging solution is a combination of their WebCenter suite, which offers a robust set of content and document management features, and their Business Process Management (BPM) suite, which helps to automate business processes through the definition of workflows and business rules. Overall, the solution provides an enterprise-class platform for end-to-end management of document images within transactional business processes. It's a solution that provides all of the capabilities needed - from document capture and recognition, to imaging and workflow - to effectively transform your ‘shoeboxes’ of files into digitally managed assets that comply with strict industry regulations. The terminology can be quite overwhelming if you're new to the space, so we've provided a summary of the primary components of the solution below, along with a short description of the two paths that can be executed to load images of scanned documents into Oracle's WebCenter suite. WebCenter Imaging (WCI): the electronic document repository that provides security, annotations, and search capabilities, and is the primary user interface for managing work items in the imaging solution SOA & BPM Suites (workflow): provide business process management capabilities, including human tasks, workflow management, service integration, and all other standard SOA features. It's interesting to note that there a number of 'jumpstart' processes available to help accelerate the integration of business applications, such as the accounts payable invoice processing solution for E-Business Suite that facilitates the processing of large volumes of invoices WebCenter Enterprise Capture (WEC): expedites the capture process of paper documents to digital images, offering high volume scanning and importing from email, and allows for flexible indexing options WebCenter Forms Recognition (WFR): automatically recognizes, categorizes, and extracts information from paper documents with greatly reduced human intervention WebCenter Content: the backend content server that provides versioning, security, and content storage There are two paths that can be executed to send data from WebCenter Capture to WebCenter Imaging, both of which are described below: 1. Direct Flow - This is the simplest and quickest way to push an image scanned from WebCenter Enterprise Capture (WEC) to WebCenter Imaging (WCI), using the bare minimum metadata. The WEC activities are defined below: The paper document is scanned (or imported from email). The scanned image is indexed using a predefined indexing profile. The image is committed directly into the process flow 2. WFR (WebCenter Forms Recognition) Flow - This is the more complex process, during which data is extracted from the image using a series of operations including Optical Character Recognition (OCR), Classification, Extraction, and Export. This process creates three files (Tiff, XML, and TXT), which are fed to the WCI Input Agent (the high speed import/filing module). The WCI Input Agent directory is a standard ingestion method for adding content to WebCenter Imaging, the process for doing so is described below: WEC commits the batch using the respective commit profile. A TIFF file is created, passing data through the file name by including values separated by "_" (underscores). WFR completes OCR, classification, extraction, export, and pulls the data from the image. In addition to the TIFF file, which contains the document image, an XML file containing the extracted data, and a TXT file containing the metadata that will be filled in WCI, are also created. All three files are exported to WCI's Input agent directory. Based on previously defined "input masks", the WCI Input Agent will pick up the seeding file (often the TXT file). Finally, the TIFF file is pushed in UCM and a unique web-viewable URL is created. Based on the mapping data read from the TXT file, a new record is created in the WCI application.  Although these processes may seem complex, each Oracle component works seamlessly together to achieve a high performing and scalable platform. The solution has been field tested at some of the largest enterprises in the world and has transformed millions and millions of paper-based documents to more easily manageable digital assets. For more information on how an Imaging solution can help your business, please contact [email protected] (for U.S. West inquiries) or [email protected] (for U.S. East inquiries). About the Author: Vikrant is a Technical Architect in Aurionpro's Oracle Implementation Services team, where he delivers WebCenter-based Content and Imaging solutions to Fortune 1000 clients. With more than twelve years of experience designing, developing, and implementing Java-based software solutions, Vikrant was one of the founding members of Aurionpro's WebCenter-based offshore delivery team. He can be reached at [email protected].

    Read the article

  • The Virtues and Challenges of Implementing Basel III: What Every CFO and CRO Needs To Know

    - by Jenna Danko
    The Basel Committee on Banking Supervision (BCBS) is a group tasked with providing thought-leadership to the global banking industry.  Over the years, the BCBS has released volumes of guidance in an effort to promote stability within the financial sector.  By effectively communicating best-practices, the Basel Committee has influenced financial regulations worldwide.  Basel regulations are intended to help banks: More easily absorb shocks due to various forms of financial-economic stress Improve risk management and governance Enhance regulatory reporting and transparency In June 2011, the BCBS released Basel III: A global regulatory framework for more resilient banks and banking systems.  This new set of regulations included many enhancements to previous rules and will have both short and long term impacts on the banking industry.  Some of the key features of Basel III include: A stronger capital base More stringent capital standards and higher capital requirements Introduction of capital buffers  Additional risk coverage Enhanced quantification of counterparty credit risk Credit valuation adjustments  Wrong  way risk  Asset Value Correlation Multiplier for large financial institutions Liquidity management and monitoring Introduction of leverage ratio Even more rigorous data requirements To implement these features banks need to embark on a journey replete with challenges. These can be categorized into three key areas: Data, Models and Compliance. Data Challenges Data quality - All standard dimensions of Data Quality (DQ) have to be demonstrated.  Manual approaches are now considered too cumbersome and automation has become the norm. Data lineage - Data lineage has to be documented and demonstrated.  The PPT / Excel approach to documentation is being replaced by metadata tools.  Data lineage has become dynamic due to a variety of factors, making static documentation out-dated quickly.  Data dictionaries - A strong and clean business glossary is needed with proper identification of business owners for the data.  Data integrity - A strong, scalable architecture with work flow tools helps demonstrate data integrity.  Manual touch points have to be minimized.   Data relevance/coverage - Data must be relevant to all portfolios and storage devices must allow for sufficient data retention.  Coverage of both on and off balance sheet exposures is critical.   Model Challenges Model development - Requires highly trained resources with both quantitative and subject matter expertise. Model validation - All Basel models need to be validated. This requires additional resources with skills that may not be readily available in the marketplace.  Model documentation - All models need to be adequately documented.  Creation of document templates and model development processes/procedures is key. Risk and finance integration - This integration is necessary for Basel as the Allowance for Loan and Lease Losses (ALLL) is calculated by Finance, yet Expected Loss (EL) is calculated by Risk Management – and they need to somehow be equal.  This is tricky at best from an implementation perspective.  Compliance Challenges Rules interpretation - Some Basel III requirements leave room for interpretation.  A misinterpretation of regulations can lead to delays in Basel compliance and undesired reprimands from supervisory authorities. Gap identification and remediation - Internal identification and remediation of gaps ensures smoother Basel compliance and audit processes.  However business lines are challenged by the competing priorities which arise from regulatory compliance and business as usual work.  Qualification readiness - Providing internal and external auditors with robust evidence of a thorough examination of the readiness to proceed to parallel run and Basel qualification  In light of new regulations like Basel III and local variations such as the Dodd Frank Act (DFA) and Comprehensive Capital Analysis and Review (CCAR) in the US, banks are now forced to ask themselves many difficult questions.  For example, executives must consider: How will Basel III play into their Risk Appetite? How will they create project plans for Basel III when they haven’t yet finished implementing Basel II? How will new regulations impact capital structure including profitability and capital distributions to shareholders? After all, new regulations often lead to diminished profitability as well as an assortment of implementation problems as we discussed earlier in this note.  However, by requiring banks to focus on premium growth, regulators increase the potential for long-term profitability and sustainability.  And a more stable banking system: Increases consumer confidence which in turn supports banking activity  Ensures that adequate funding is available for individuals and companies Puts regulators at ease, allowing bankers to focus on banking Stability is intended to bring long-term profitability to banks.  Therefore, it is important that every banking institution takes the steps necessary to properly manage, monitor and disclose its risks.  This can be done with the assistance and oversight of an independent regulatory authority.  A spectrum of banks exist today wherein some continue to debate and negotiate with regulators over the implementation of new requirements, while others are simply choosing to embrace them for the benefits I highlighted above. Do share with me how your institution is coping with and embracing these new regulations within your bank. Dr. Varun Agarwal is a Principal in the Banking Practice for Capgemini Financial Services.  He has over 19 years experience in areas that span from enterprise risk management, credit, market, and to country risk management; financial modeling and valuation; and international financial markets research and analyses.

    Read the article

  • Access Services in SharePoint Server 2010

    - by Wayne
    Another SharePoint Server 2010 feature which cannot go unnoticed is the Access Services. Access Services is a service in SharePoint Server 2010 that allows administrators to view, edit, and configure a Microsoft access application within a Web Browser. Access Services settings support backup and recovery, regardless of whether there is a UI setting in Central Administration. However, backup and recovery only apply to service-level and administrative-level settings; end-user content from the Access application is not backed up as part of this process. Access Services has Windows PowerShell functionality that can be used to provide the service that uses settings from a previous backup; configure and manage macro and query setting; manage and configure session management; and configure all the global settings of the service. Key Benefits of SharePoint Server Access Services Easier Access to right tools: The enhanced, customizable Ribbon in Access 2010 makes it easy to uncover more commands so you can focus on the end product. The new Microsoft Office BackstageTM view is yet another feature that can help you easily analyze and document your database, share, publish, and customize your Access 2010 experience, all from one convenient location. Helps build database effortlessly and quickly: Out-of-the box templates and reusable components make Access Services the fastest, simplest database solution available. It helps find new pre-built templates which you can start using without customization or select templates created by your peers in the Access online community and customize them to meet your needs. It builds your databases with new modular components. New Application Parts enable you to add a set of common Access components, such as a table and form for task management, to your database in a few simple clicks. Database navigation is now simplified. It creates Navigation Forms and makes your frequently used forms and reports more accessible without writing any code or logic. Create Impactful forms and reports: Whether it's an inventory of your assets or customer sales database, Access 2010 brings the innovative tools you'd expect from Microsoft Office. Access Services easily spot trends and add emphasis to your data. It quickly create coordinating database forms and reports and bring the Web into your database. Obtain a centralized landing pad for your data: Access 2010 offers easy ways to bring your data together and help increase work quality. New technologies help break down barriers so you can share and work together on your databases, making you or your team more efficient and productive. Add automation and complex expressions: If you need a more robust database design, such as preventing record deletion if a specific condition is met or if you need to create calculations to forecast your budget, Access 2010 empowers you to be your own developer. The enhanced Expression Builder greatly simplifies your expression building experience with IntelliSense®. With the revamped Macro Designer, it's now even easier for you to add basic logic to your database. New Data Macros allow you to attach logic to your data, centralizing the logic on the table, not the objects that update your data. Key features of Access Services 2010 - Access database content through a Web browser: Newly added Access Services on Microsoft SharePoint Server 2010 enables you to make your databases available on the Web with new Web databases. Users without an Access client can open Web forms and reports via a browser and changes are automatically synchronized. - Simplify how you access the features you need: The Ribbon, improved in Access 2010, helps you access commands even more quickly by enabling you to customize or create your own tabs. The new Microsoft Office Backstage view replaces the traditional File menu to provide one central, organized location for all of your document management tasks. - Codeless navigation: Use professional looking web-like navigation forms to make frequently used forms and reports more accessible without writing any code or logic. - Easily reuse Access items in other databases: Use Application Parts to add pre-built Access components for common tasks to your database in a few simple clicks. You can also package common database components, such as data entry forms and reports for task management, and reuse them across your organization or other databases. - Simplified formatting: By using Office themes you can create coordinating professional forms and reports across your database. Simply select a familiar and great looking Office theme, or design your own, and apply it to your database. Newly created Access objects will automatically match your chosen theme.

    Read the article

  • Telerik Releases a new Visual Entity Designer

    Love LINQ to SQL but are concerned that it is a second class citizen? Need to connect to more databases other than SQL Server? Think that the Entity Framework is too complex? Want a domain model designer for data access that is easy, yet powerful? Then the Telerik Visual Entity Designer is for you. Built on top of Telerik OpenAccess ORM, a very mature and robust product, Teleriks Visual Entity Designer is a new way to build your domain model that is very powerful and also real easy to use. How easy? Ill show you here. First Look: Using the Telerik Visual Entity Designer To get started, you need to install the Telerik OpenAccess ORM Q1 release for Visual Studio 2008 or 2010. You dont need to use any of the Telerik OpenAccess wizards, designers, or using statements. Just right click on your project and select Add|New Item from the context menu. Choose Telerik OpenAccess Domain Model from the Visual Studio project templates. (Note to existing OpenAccess users, dont run the Enable ORM wizard or any other OpenAccess menu unless you are building OpenAccess Entities.) You will then have to specify the database backend (SQL Server, SQL Azure, Oracle, MySQL, etc) and connection. After you establish your connection, select the database objects you want to add to your domain model. You can also name your model, by default it will be NameofyourdatabaseEntityDiagrams. You can click finish here if you are comfortable, or tweak some advanced settings. Many users of domain models like to add prefixes and suffixes to classes, fields, and properties as well as handle pluralization. I personally accept the defaults, however, I hate how DBAs force underscores on me, so I click on the option to remove them. You can also tweak your namespace, mapping options, and define your own code generation template to gain further control over the outputted code. This is a very powerful feature, but for now, I will just accept the defaults.   When we click finish, you can see your domain model as a file with the .rlinq extension in the Solution Explorer. You can also bring up the visual designer to view or further tweak your model by double clicking on the model in the Solution Explorer.  Time to use the model! Writing a LINQ Query Programming against the domain model is very simple using LINQ. Just set a reference to the model (line 12 of the code below) and write a standard LINQ statement (lines 14-16).  (OpenAccess users: notice the you dont need any using statements for OpenAccess or an IObjectScope, just raw LINQ against your model.) 1: using System; 2: using System.Linq; 3: //no need for anOpenAccess using statement 4:   5: namespace ConsoleApplication3 6: { 7: class Program 8: { 9: static void Main(string[] args) 10: { 11: //a reference tothe data context 12: NorthwindEntityDiagrams dat = new NorthwindEntityDiagrams(); 13: //LINQ Statement 14: var result = from c in dat.Customers 15: where c.Country == "Germany" 16: select c; 17:   18: //Print out the company name 19: foreach (var cust in result) 20: { 21: Console.WriteLine("CompanyName: " + cust.CompanyName); 22: } 23: //keep the consolewindow open 24: Console.Read(); 25: } 26: } 27: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Lines 19-24 loop through the result of our LINQ query and displays the results. Thats it! All of the super powerful features of OpenAccess are available to you to further enhance your experience, however, in most cases this is all you need. In future posts I will show how to use the Visual Designer with some other scenarios. Stay tuned. Enjoy! Technorati Tags: Telerik,OpenAccess,LINQ Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Application Development: Python or Java (or PHP)

    - by luckysmack
    I'm looking to get into application development, such as Facebook or Android apps and games. I am doing this for fun and to learn. Once my skills are to par I would like to have some side income from the apps, but I'm not banking on living off that (just so you know where I'm coming from and know what my end goals are). Currently I know and am familiar with PHP and frameworks such as cakephp and yii. However, I have been wanting to learn another language to broaden my horizons and to become a better developer. So I have narrowed it down to 2 languages. Python, and Java (I can already hear people cringing at the difference in the languages I have chosen, but I have some reasons). Python: closer to PHP that Java. Cross platformability. Also great as a general scripting language and has many file system level benefits that PHP does not. Cleaner syntax, readability, blah blah and the list goed on. Python will work great for cross platform apps and can be run on many OS's and is supported by Facebook for app development. But there is no support on Android (for full fledged apps). Java: a much stronger typed language, very robust community and corporate backing. Knowing Java is also good for personal marketability for enterprises, if you're into that. The main benefit here is that Java can write apps natively for Android and the apps can be ported for web versions to play on Facebook. So while I have seen many developers prefer Java over the two, Java has this significant advantage, where I can market my apps in both markets and in the future build more potential income. But like I said it is for fun. While money isn't the goal, it would still be nice. PHP: I'm putting this here because I know it already, and I'm sure a case could be made for it. It obviously works great for Facebook but like Python does not do so well on android. While it's mostly the realm of 'application development' that appeals to me, I do find Android apps fairly interesting and something that has a ton of potential to. But then again Facebook has a ton more users and the apps can also potentially be more immersive (desktop vs. mobile). So this is why I'm kinda stuck on what route to choose. Python for Facebook and web apps, with likely faster development to production times, or Java which can be developed for any of the platforms to make apps. Side note: I'm not really trying to get into 3D development, mostly 2D. And I also want to make an app with real-time play (websockets, etc). Someone mentioned node, js to me for that but Python seems to be more globally versatile for my goals. So, to anyone that does Facebook or Android development in either language: what do you suggest? Any input is valuable and I do appreciate it. And sorry for being long winded. EDIT: as mentioned in one of the answers, my primary goal is gaming. Although I do have some plans for non gaming apps such as general web based and desktop based ones. But gaming is my main goal with the possibility of income. EDIT: Another consideration could be Jython. Writing Python code which is converted into Java bytecode. This would allow the ability to do Android apps using Python. I could be wrong though, I'm still looking into it. Update 1-26-11: I recently acquired a new job which required I learn .NET using C#. Im sure some of you are cringing already but I really like the whole system and how it all works together between desktop and web development. But, as I am still interested in Python very much, and after some research I have decided I will learn Python as well as the IronPython implementation for .NET. But (again: I know...) since .NET is mostly a Windows thing and not as cross-compatible as I like, I will be learning Mono which is a cross platform implementation of .NET where I can use what I learn at work using C# and what I want to learn, Python/IronPython. So while learning and writing C#/.NET @ work I will be learning Python - Mono - Iron Python for what I want to do personally. And the benefit of them all being very closely related will help me out a lot, I think. What do you guys think? I almost feel like that should be another question, but there's not much of a question. Either way, you guys gave very helpful input.

    Read the article

  • Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

    - by ladaghini
    I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

    Read the article

  • Updating a database connection password using a script

    - by Tim Dexter
    An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

    Read the article

  • jQuery with SharePoint solutions

    - by KunaalKapoor
    For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced.  In other words, take into account your world before applying it.Script your deployment options.  Folder in SPD. Use the file system.  Make external references.  The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP).  Drop it on the page and it’s there.  Easy but dangerousCustom Actions. Great for global deployments of JQuery.  Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP.  Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity.  Any scripts run with the same privileges of the current user.  In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM.  There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries.  Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use.  You can add it to your page with a script,  put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'>  if (typeof jQuery == 'undefined')    document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor.  You can get past that, “But it looks like SharePoint”  Take a long list view and put it into JQuery with pagination, etc and you are the hero.  It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem.  If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts  and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers.  Take into account client resourcesHarm the Farm -  You need to code wisely and negatively test.  Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again.  So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake.  They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

    Read the article

  • Data management in unexpected places

    - by Ashok_Ora
    Normal 0 false false false EN-US X-NONE X-NONE Data management in unexpected places When you think of network switches, routers, firewall appliances, etc., it may not be obvious that at the heart of these kinds of solutions is an engine that can manage huge amounts of data at very high throughput with low latencies and high availability. Consider a network router that is processing tens (or hundreds) of thousands of network packets per second. So what really happens inside a router? Packets are streaming in at the rate of tens of thousands per second. Each packet has multiple attributes, for example, a destination, associated SLAs etc. For each packet, the router has to determine the address of the next “hop” to the destination; it has to determine how to prioritize this packet. If it’s a high priority packet, then it has to be sent on its way before lower priority packets. As a consequence of prioritizing high priority packets, lower priority data packets may need to be temporarily stored (held back), but addressed fairly. If there are security or privacy requirements associated with the data packet, those have to be enforced. You probably need to keep track of statistics related to the packets processed (someone’s sure to ask). You have to do all this (and more) while preserving high availability i.e. if one of the processors in the router goes down, you have to have a way to continue processing without interruption (the customer won’t be happy with a “choppy” VoIP conversation, right?). And all this has to be achieved without ANY intervention from a human operator – the router is most likely to be in a remote location – it must JUST CONTINUE TO WORK CORRECTLY, even when bad things happen. How is this implemented? As soon as a packet arrives, it is interpreted by the receiving software. The software decodes the packet headers in order to determine the destination, kind of packet (e.g. voice vs. data), SLAs associated with the “owner” of the packet etc. It looks up the internal database of “rules” of how to process this packet and handles the packet accordingly. The software might choose to hold on to the packet safely for some period of time, if it’s a low priority packet. Ah – this sounds very much like a database problem. For each packet, you have to minimally · Look up the most efficient next “hop” towards the destination. The “most efficient” next hop can change, depending on latency, availability etc. · Look up the SLA and determine the priority of this packet (e.g. voice calls get priority over data ftp) · Look up security information associated with this data packet. It may be necessary to retrieve the context for this network packet since a network packet is a small “slice” of a session. The context for the “header” packet needs to be stored in the router, in order to make this work. · If the priority of the packet is low, then “store” the packet temporarily in the router until it is time to forward the packet to the next hop. · Update various statistics about the packet. In most cases, you have to do all this in the context of a single transaction. For example, you want to look up the forwarding address and perform the “send” in a single transaction so that the forwarding address doesn’t change while you’re sending the packet. So, how do you do all this? Berkeley DB is a proven, reliable, high performance, highly available embeddable database, designed for exactly these kinds of usage scenarios. Berkeley DB is a robust, reliable, proven solution that is currently being used in these scenarios. First and foremost, Berkeley DB (or BDB for short) is very very fast. It can process tens or hundreds of thousands of transactions per second. It can be used as a pure in-memory database, or as a disk-persistent database. BDB provides high availability – if one board in the router fails, the system can automatically failover to another board – no manual intervention required. BDB is self-administering – there’s no need for manual intervention in order to maintain a BDB application. No need to send a technician to a remote site in the middle of nowhere on a freezing winter day to perform maintenance operations. BDB is used in over 200 million deployments worldwide for the past two decades for mission-critical applications such as the one described here. You have a choice of spending valuable resources to implement similar functionality, or, you could simply embed BDB in your application and off you go! I know what I’d do – choose BDB, so I can focus on my business problem. What will you do? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

    Read the article

  • Most Innovative IDM Projects: Awards at OpenWorld

    - by Tanu Sood
    On Tuesday at Oracle OpenWorld 2012, Oracle recognized the winners of Innovation Awards 2012 at a ceremony presided over by Hasan Rizvi, Executive Vice President at Oracle. Oracle Fusion Middleware Innovation Awards recognize customers for achieving significant business value through innovative uses of Oracle Fusion Middleware offerings. Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. This year’s Award honors customers for their cutting-edge solutions driving business innovation and IT modernization using Oracle Fusion Middleware. The program has grown over the past 6 years, receiving a record number of nominations from customers around the globe. The winners were selected by a panel of judges that ranked each nomination across multiple different scoring categories. Congratulations to both Avea and ETS for winning this year’s Innovation Award for Identity Management. Identity Management Innovation Award 2012 Winner – Avea Company: Founded in 2004, AveA is the sole GSM 1800 mobile operator of Turkey and has reached a nationwide customer base of 12.8 million as of the end of 2011 Region: Turkey (EMEA) Products: Oracle Identity Manager, Oracle Identity Analytics, Oracle Access Management Suite Business Drivers: ·         To manage the agility and scale required for GSM Operations and enable call center efficiency by enabling agents to change their identity profiles (accounts and entitlements) rapidly based on call load. ·         Enhance user productivity and call center efficiency with self service password resets ·         Enforce compliance and audit reporting ·         Seamless identity management between AveA and parent company Turk Telecom Innovation and Results: ·         One of the first Sun2Oracle identity management migrations designed for high performance provisioning and trusted reconciliation built with connectors developed on the ICF architecture that provides custom user interfaces for  dynamic and rapid management of roles and entitlements along with entitlement level attestation using closed loop remediation between Oracle Identity Manager and Oracle Identity Analytics. ·         Dramatic reduction in identity administration and call center password reset tasks leading to 20% reduction in administration costs and 95% reduction in password related calls. ·         Enhanced user productivity by up to 25% to date ·         Enforced enterprise security and reduced risk ·         Cost-effective compliance management ·         Looking to seamlessly integrate with parent and sister companies’ infrastructure securely. Identity Management Innovation Award 2012 Winner – Education Testing Service (ETS)       See last year's winners here --Company: ETS is a private nonprofit organization devoted to educational measurement and research, primarily through testing. Region: U.S.A (North America) Products: Oracle Access Manager, Oracle Identity Federation, Oracle Identity Manager Business Drivers: ETS develops and administers more than 50 million achievement and admissions tests each year in more than 180 countries, at more than 9,000 locations worldwide.  As the business becomes more globally based, having a robust solution to security and user management issues becomes paramount. The organizations was looking for: ·         Simplified user experience for over 3000 company users and more than 6 million dynamic student and staff population ·         Infrastructure and administration cost reduction ·         Managing security risk by controlling 3rd party access to ETS systems ·         Enforce compliance and manage audit reporting ·         Automate on-boarding and decommissioning of user account to improve security, reduce administration costs and enhance user productivity ·         Improve user experience with simplified sign-on and user self service Innovation and Results: 1.    Manage Risk ·         Centralized system to control user access ·         Provided secure way of accessing service providers' application using federated SSO. ·         Provides reporting capability for auditing, governance and compliance. 2.    Improve efficiency ·         Real-Time provisioning to target systems ·         Centralized provisioning system for user management and access controls. ·         Enabling user self services. 3.    Reduce cost ·         Re-using common shared services for provisioning, SSO, Access by application reducing development cost and time. ·         Reducing infrastructure and maintenance cost by decommissioning legacy/redundant IDM services. ·         Reducing time and effort to implement security functionality in business applications (“onboard” instead of new development). ETS was able to fold in new and evolving requirement in addition to the initial stated goals realizing quick ROI and successfully meeting business objectives. Congratulations to the winners once again. We will be sure to bring you more from these Innovation Award winners over the next few months.

    Read the article

  • How to Implement Single Sign-On between Websites

    - by hmloo
    Introduction Single sign-on (SSO) is a way to control access to multiple related but independent systems, a user only needs to log in once and gains access to all other systems. a lot of commercial systems that provide Single sign-on solution and you can also choose some open source solutions like Opensso, CAS etc. both of them use centralized authentication and provide more robust authentication mechanism, but if each system has its own authentication mechanism, how do we provide a seamless transition between them. Here I will show you the case. How it Works The method we’ll use is based on a secret key shared between the sites. Origin site has a method to build up a hashed authentication token with some other parameters and redirect the user to the target site. variables Status Description ssoEncode required hash(ssoSharedSecret + , + ssoTime + , + ssoUserName) ssoTime required timestamp with format YYYYMMDDHHMMSS used to prevent playback attacks ssoUserName required unique username; required when a user is logged in Note : The variables will be sent via POST for security reasons Building a Single Sign-On Solution Origin Site has function to 1. Create the URL for your Request. 2. Generate required authentication parameters 3. Redirect to target site. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { string postbackUrl = "http://www.targetsite.com/sso.aspx"; string ssoTime = DateTime.Now.ToString("yyyyMMddHHmmss"); string ssoUserName = User.Identity.Name; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string ssoHash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); string value = string.Format("{0}:{1},{2}", ssoHash,ssoTime, ssoUserName); Response.Clear(); StringBuilder sb = new StringBuilder(); sb.Append("<html>"); sb.AppendFormat(@"<body onload='document.forms[""form""].submit()'>"); sb.AppendFormat("<form name='form' action='{0}' method='post'>", postbackUrl); sb.AppendFormat("<input type='hidden' name='t' value='{0}'>", value); sb.Append("</form>"); sb.Append("</body>"); sb.Append("</html>"); Response.Write(sb.ToString()); Response.End(); } } Target Site has function to 1. Get authentication parameters. 2. Validate the parameters with shared secret. 3. If the user is valid, then do authenticate and redirect to target page. 4. If the user is invalid, then show errors and return. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { if (User.Identity.IsAuthenticated) { Response.Redirect("~/Default.aspx"); } } if (Request.Params.Get("t") != null) { string ticket = Request.Params.Get("t"); char[] delimiters = new char[] { ':', ',' }; string[] ssoVariable = ticket.Split(delimiters, StringSplitOptions.None); string ssoHash = ssoVariable[0]; string ssoTime = ssoVariable[1]; string ssoUserName = ssoVariable[2]; DateTime appTime = DateTime.MinValue; int offsetTime = 60; // get this from config or similar try { appTime = DateTime.ParseExact(ssoTime, "yyyyMMddHHmmss", null); } catch { //show error return; } if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } bool isValid = false; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string hash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); if (string.Compare(ssoHash, hash, true) == 0) { if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } else { isValid = true; } } if (isValid) { //Do authenticate; } else { //show error return; } } else { //show error } } } Summary This is a very simple and basic SSO solution, and its main advantage is its simplicity, only needs to add a single page to do SSO authentication, do not need to modify the existing system infrastructure.

    Read the article

  • Top Questions and Answers for Pluging into Oracle Database as a Service

    - by David Swanger
    Yesterday we hosted a comprehensive online forum that shared a comprehensive path to help your organization design, deploy, and deliver a Database as a Service cloud. If you missed the online forum, you can watch it on demand by registering here. We received numerous questions.  Below are highlights of the most informative: DBaaS requires a lengthy and careful design efforts. What is the minimum requirements of setting up a scaled-down environment and test it out? You should have an OEM 12c environment for DBaaS administration and then a target database deployment platform that has the key characteristics of what your production environment will look like. This could be a single server or it could be a small pool of hosts if your production DBaaS will be larger and you want to test a more robust / real world configuration with Zones and Pools or DR capabilities for example. How does this benefit companies having their own data center? This allows companies to transform their internal IT to a service delivery model for the database. The benefits to the company are significant cost savings, improved business agility and reduced risk. The benefits to the consumers (internal) of services if much fast provisioning, and response to change in business requirements. From a deployment perspective, is DBaaS's job solely DBA's job? The best deployment model enables the DBA (or end-user) to control the entire process. All resources required to deploy the service are pre-provisioned, and there are no external dependencies (on network, storage, sysadmins teams). The service is created either via a self-service portal or by the DBA. The purpose of self service seems to be that the end user does not rely on the DBA. I just need to give him a template. He decides how much AMM he needs. Why shall I set it one by one. That doesn't seem to be the purpose of self service. Most customers we have worked with define a standardized service catalog, with a few (2 to 5) different classes of service. For each of these classes, there is a pre-defined deployment template, and the user has the ability to select from some pre-defined service sizes. The administrator only has to create this catalog once. Each user then simply selects from the options offered in the catalog.  Looking at DBaaS service definition, it seems to be no different from a service definition provided by a well defined DBA team. Why do you attribute it to DBaaS? There are a couple of perspectives. First, some organizations might already be operating with a high level of standardization and a higher level of maturity from an ITIL or Service Management perspective. Their journey to DBaaS could be shorter and their Service Definition will evolve less but they still might need to add capabilities such as Self Service and Metering/Chargeback. Other organizations are still operating in highly siloed environments with little automation and their formal Service Definition (if they have one) will be a lot less mature today. Therefore their future state DBaaS will look a lot different from their current state, as will their Service Definition. How database as a service impact or help with "Click to Compute" or deploying "Database in cloud infrastructure" DBaaS enables Click to Compute. Oracle DBaaS can be implemented using three architecture models: Oracle Multitenant 12c, native consolidation using Oracle Database and consolidation using virtualization in infrastructure cloud. As Deploy session showed, you get higher consolidating density and efficiency using Multitenant and higher isolation using infrastructure cloud. Depending upon your business needs, DBaaS can be implemented using any of these models. How exactly is the DBaaS different from the traditional db? Storage/OS/DB all together to 'transparently' provide service to applications? Will there be across-databases access by application/user. Some key differences are: 1) The services run on a shared platform. 2) The services can be rapidly provisioned (< 15 minutes). 3) The services are dynamic and can be relocated, grown, shrunk as needed to meet business needs without disruption and rapidly. 4) The user is able to provision the services directly from a standardized service catalog.. With 24x7x365 databases its difficult to find off peak hrs to do basic admin tasks such as gathering stats, running backups, batch jobs. How does pluggable database handle this and different needs/patching downtime of apps databases might be serving? You can gather stats in Oracle Multitenant the same way you had been in regular databases. Regarding patching/upgrading, Oracle Multitenant makes patch/upgrade very efficient in that you can pre-provision a new version/patched multitenant db in a different ORACLE_HOME and then unplug a PDB from its CDB and plug it into the newer/patched CDB in seconds.  Thanks for all the great questions!  If you'd like to learn more and missed the online forum, you can watch it on demand here.

    Read the article

  • A Knights Tale

    - by Phil Factor
    There are so many lessons to be learned from the story of Knight Capital losing nearly half a billion dollars as a result of a deployment gone wrong. The Knight Capital Group (KCG N) was an American global financial services firm engaging in market making, electronic execution, and institutional sales and trading. According to the recent order (File No.3.15570) against Knight Capital by U.S. Securities and Exchange Commission?, Knight had, for many years used some software which broke up incoming “parent” orders into smaller “child” orders that were then transmitted to various exchanges or trading venues for execution. A tracking ‘cumulative quantity’ function counted the number of ‘child’ orders and stopped the process once the total of child orders matched the ‘parent’ and so the parent order had been completed. Back in the mists of time, some code had been added to it  which was excuted if a particular flag was set. It was called ‘power peg’ and seems to have had a similar design and purpose, but, one guesses, would have shared the same tracking function. This code had been abandoned in 2003, but never deleted. In 2005, The tracking function was moved to an earlier point in the main process. It would seem from the account that, from that point, had that flag ever been set, the old ‘Power Peg’ would have been executed like Godzilla bursting from the ice, making child orders without limit without any tracking function. It wasn’t, presumably because the software that set the flag was removed. In 2012, nearly a decade after ‘Power Peg’ was abandoned, Knight prepared a new module to their software to cope with the imminent Retail Liquidity Program (RLP) for the New York Stock Exchange. By this time, the flag had remained unused and someone made the fateful decision to reuse it, and replace the old ‘power peg’ code with this new RLP code. Had the two actions been done together in a single automated deployment, and the new deployment tested, all would have been well. It wasn’t. To quote… “Beginning on July 27, 2012, Knight deployed the new RLP code in SMARS in stages by placing it on a limited number of servers in SMARS on successive days. During the deployment of the new code, however, one of Knight’s technicians did not copy the new code to one of the eight SMARS computer servers. Knight did not have a second technician review this deployment and no one at Knight realized that the Power Peg code had not been removed from the eighth server, nor the new RLP code added. Knight had no written procedures that required such a review.” (para 15) “On August 1, Knight received orders from broker-dealers whose customers were eligible to participate in the RLP. The seven servers that received the new code processed these orders correctly. However, orders sent with the repurposed flag to the eighth server triggered the defective Power Peg code still present on that server. As a result, this server began sending child orders to certain trading centers for execution. Because the cumulative quantity function had been moved, this server continuously sent child orders, in rapid sequence, for each incoming parent order without regard to the number of share executions Knight had already received from trading centers. Although one part of Knight’s order handling system recognized that the parent orders had been filled, this information was not communicated to SMARS.” (para 16) SMARS routed millions of orders into the market over a 45-minute period, and obtained over 4 million executions in 154 stocks for more than 397 million shares. By the time that Knight stopped sending the orders, Knight had assumed a net long position in 80 stocks of approximately $3.5 billion and a net short position in 74 stocks of approximately $3.15 billion. Knight’s shares dropped more than 20% after traders saw extreme volume spikes in a number of stocks, including preferred shares of Wells Fargo (JWF) and semiconductor company Spansion (CODE). Both stocks, which see roughly 100,000 trade per day, had changed hands more than 4 million times by late morning. Ultimately, Knight lost over $460 million from this wild 45 minutes of trading. Obviously, I’m interested in all this because, at one time, I used to write trading systems for the City of London. Obviously, the US SEC is in a far better position than any of us to work out the failings of Knight’s IT department, and the report makes for painful reading. I can’t help observing, though, that even with the breathtaking mistakes all along the way, that a robust automated deployment process that was ‘all-or-nothing’, and tested from soup to nuts would have prevented the disaster. The report reads like a Greek Tragedy. All the way along one wants to shout ‘No! not that way!’ and ‘Aargh! Don’t do it!’. As the tragedy unfolds, the audience weeps for the players, trapped by a cruel fate. All application development and deployment requires defense in depth. All IT goes wrong occasionally, but if there is a culture of defensive programming throughout, the consequences are usually containable. For financial systems, these defenses are required by statute, and ignored only by the foolish. Knight’s mistakes weren’t made by just one hapless sysadmin, but were progressive errors by an  IT culture spanning at least ten years.  One can spell these out, but I think they’re obvious. One can only hope that the industry studies what happened in detail, learns from the mistakes, and draws the right conclusions.

    Read the article

  • Why Executives Need Enterprise Project Portfolio Management: 3 Key Considerations to Drive Value Across the Organization

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} By: Guy Barlow, Oracle Primavera Industry Strategy Director Over the last few years there has been a tremendous shift – some would say tectonic in nature – that has brought project management to the forefront of executive attention. Many factors have been driving this growing awareness, most notably, the global financial crisis, heightened regulatory environments and a need to more effectively operationalize corporate strategy. Executives in India are no exception. In fact, given the phenomenal rate of progress of the country, top of mind for all executives (whether in finance, operations, IT, etc.) is the need to build capacity, ramp-up production and ensure that the right resources are in place to capture growth opportunities. This applies across all industries from asset-intensive – like oil & gas, utilities and mining – to traditional manufacturing and the public sector, including services-based sectors such as the financial, telecom and life sciences segments are also part of the mix. However, compounding matters is a complex, interplay between projects – big and small, complex and simple – as companies expand and grow both domestically and internationally. So, having a standardized, enterprise wide solution for project portfolio management is natural. Failing to do so is akin to having two ERP systems, one to manage “large” invoices and one to manage “small” invoices. It makes no sense and provides no enterprise wide visibility. Therefore, it is imperative for executives to understand the full range of their business commitments, the benefit to the company, current performance and associated course corrections if needed. Irrespective of industry and regardless of the use case (e.g., building a power plant, launching a new financial service or developing a new automobile) company leaders need to approach the value of enterprise project portfolio management via 3 critical areas: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} 1. Greater Financial Discipline – Improve financial rigor and results through better governance and control is an imperative given today’s financial uncertainty and greater investment scrutiny. For example, as India plans a US$1 trillion investment in the country’s infrastructure how do companies ensure costs are managed? How do you control cash flow? Can you easily report this to stakeholders? 2. Improved Operational Excellence – Increase efficiency and reduce costs through robust collaboration and integration. Upwards of 66% of cost variances are driven by poor supplier collaboration. As you execute initiatives do you have visibility into the performance of your supply base? How are they integrated into the broader program plan? 3. Enhanced Risk Mitigation – Manage and react to uncertainty through improved transparency and contingency planning. What happens if you’re faced with a skills shortage? How do you plan and account for geo-political or weather related events? In summary, projects are not just the delivery of a product or service to a customer inside a predetermined schedule; they often form a contractual and even moral obligation to shareholders and stakeholders alike. Hence the intimate connection between executives and projects, with the latter providing executives with the platform to demonstrate that their organization has the capabilities and competencies needed to meet and, whenever possible, exceed their customer commitments. Effectively developing and operationalizing corporate strategy is the hallmark of successful executives and enterprise project and portfolio management allows them to achieve this goal. Article was first published for Manage India, an e-newsletter, PMI India.

    Read the article

  • The Best BPM Journey: More Exciting Destinations with Process Accelerators

    - by Cesare Rotundo
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Open World (OOW) earlier this month has been a great occasion to discuss with our BPM customers. It was interesting to hear definite patterns emerging from those conversations: “BPM is a journey”, “experiences to share”, “our organization now understands what BPM is”, and my favorite (with some caveats): “BPM is like wine tasting, once you start, you want to try more”. These customers have started their journey, climbed up the learning curve, and reached a vantage point that allows them to see their next BPM destination. They see the next few processes they are going to tackle and improve with BPM. These processes/destinations target both horizontal processes where BPM replaces or coordinates manual activities, and critical industry processes that the company needs to improve to compete and deliver increasing value. Each new destination generates value, allowing the organization to reduce the cost of manual processes that were not supported by apps/custom development, and increase efficiency of end-to-end processes partially covered by apps/custom dev. The question we wanted to answer is how to help organizations experience deeper success with BPM, by increasing their awareness of the potential for reaching new targets, and equipping them with the right tools. We decided that we needed to identify destinations, and plot routes to show the fastest path to those destinations. In the end we want to enable customers to reach “Process Excellence”: continuously set new targets and consistently and efficiently reach them. The result is Oracle Process Accelerators (PA), solutions built using the rich functionality in Oracle BPM Suite. PAs offers a rapidly expanding list of exciting destinations. Our launch of the latest installment of Process Accelerators at Oracle Open World includes new Industry-focused solutions such as Public Sector Incident Reporting and Financial Services Loan Origination, and improved other horizontal PAs, including Travel Request Management, Document Routing and Approval, and Internal Service Requests. Just before OOW we had extended the Oracle deployment of Travel Request Management, riding the enthusiastic response from early adopters among travelers (employees), management and support (approvers). “Getting there first” means being among the first to extract value from the PA approach, while acquiring deeper insights into the customers’ perspective. This is especially noteworthy when it comes to PAs, a set of solutions designed to be quickly deployed and iteratively improved by customers. The OOW launch has generated immediate feedback from customers, non-customers, analysts, and partners. They all confirmed that both Business and IT at organizations benefit from PAs when it comes to exploring the potential for BPM to improve their business processes. PAs help customers visualize what can be done with BPM, and PAs are made to be extended: you can see your destination, change the path to fit your needs, and deploy. We're discovering new destinations/processes that the market wants us to support, generic enough across industries and within industries. We'll keep on building sets of requirements, deliver functional design, construct solutions using Oracle BPM, and test them not only functionally but for performance, scalability, clustering, making them robust, product-quality. Delivering BPM solutions with product-grade quality is the equivalent of following a tried-and-tested path on a map. Do you know of existing destinations in your industry? If yes, we can draw a path to innovative processes together.

    Read the article

  • Local LINQtoSQL Database For Your Windows Phone 7 Application

    - by Tim Murphy
    There aren’t many applications that are of value without having some for of data store.  In Windows Phone development we have a few options.  You can store text directly to isolated storage.  You can also use a number of third party libraries to create or mimic databases in isolated storage.  With Mango we gained the ability to have a native .NET database approach which uses LINQ to SQL.  In this article I will try to bring together the components needed to implement this last type of data store and fill in some of the blanks that I think other articles have left out. Defining A Database The first things you are going to need to do is define classes that represent your tables and a data context class that is used as the overall database definition.  The table class consists of column definitions as you would expect.  They can have relationships and constraints as with any relational DBMS.  Below is an example of a table definition. First you will need to add some assembly references to the code file. using System.ComponentModel;using System.Data.Linq;using System.Data.Linq.Mapping; You can then add the table class and its associated columns.  It needs to implement INotifyPropertyChanged and INotifyPropertyChanging.  Each level of the class needs to be decorated with the attribute appropriate for that part of the definition.  Where the class represents the table the properties represent the columns.  In this example you will see that the column is marked as a primary key and not nullable with a an auto generated value. You will also notice that the in the column property’s set method It uses the NotifyPropertyChanging and NotifyPropertyChanged methods in order to make sure that the proper events are fired. [Table]public class MyTable: INotifyPropertyChanged, INotifyPropertyChanging{ public event PropertyChangedEventHandler PropertyChanged; private void NotifyPropertyChanged(string propertyName) { if(PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } public event PropertyChangingEventHandler PropertyChanging; private void NotifyPropertyChanging(string propertyName) { if(PropertyChanging != null) { PropertyChanging(this, new PropertyChangingEventArgs(propertyName)); } } private int _TableKey; [Column(IsPrimaryKey = true, IsDbGenerated = true, DbType = "INT NOT NULL Identity", CanBeNull = false, AutoSync = AutoSync.OnInsert)] public int TableKey { get { return _TableKey; } set { NotifyPropertyChanging("TableKey"); _TableKey = value; NotifyPropertyChanged("TableKey"); } } The last part of the database definition that needs to be created is the data context.  This is a simple class that takes an isolated storage location connection string its constructor and then instantiates tables as public properties. public class MyDataContext: DataContext{ public MyDataContext(string connectionString): base(connectionString) { MyRecords = this.GetTable<MyTable>(); } public Table<MyTable> MyRecords;} Creating A New Database Instance Now that we have a database definition it is time to create an instance of the data context within our Windows Phone app.  When your app fires up it should check if the database already exists and create an instance if it does not.  I would suggest that this be part of the constructor of your ViewModel. db = new MyDataContext(connectionString);if(!db.DatabaseExists()){ db.CreateDatabase();} The next thing you have to know is how the connection string for isolated storage should be constructed.  The main sticking point I have found is that the database cannot be created unless the file mode is read/write.  You may have different connection strings but the initial one needs to be similar to the following. string connString = "Data Source = 'isostore:/MyApp.sdf'; File Mode = read write"; Using you database Now that you have done all the up front work it is time to put the database to use.  To make your life a little easier and keep proper separation between your view and your viewmodel you should add a couple of methods to the viewmodel.  These will do the CRUD work of your application.  What you will notice is that the SubmitChanges method is the secret sauce in all of the methods that change data. private myDataContext myDb;private ObservableCollection<MyTable> _viewRecords;public ObservableCollection<MyTable> ViewRecords{ get { return _viewRecords; } set { _viewRecords = value; NotifyPropertyChanged("ViewRecords"); }}public void LoadMedstarDbData(){ var tempItems = from MyTable myRecord in myDb.LocalScans select myRecord; ViewRecords = new ObservableCollection<MyTable>(tempItems);}public void SaveChangesToDb(){ myDb.SubmitChanges();}public void AddMyTableItem(MyTable newScan){ myDb.LocalScans.InsertOnSubmit(newScan); myDb.SubmitChanges();}public void DeleteMyTableItem(MyTable newScan){ myDb.LocalScans.DeleteOnSubmit(newScan); myDb.SubmitChanges();} Updating existing database What happens when you need to change the structure of your database?  Unfortunately you have to add code to your application that checks the version of the database which over time will create some pollution in your codes base.  On the other hand it does give you control of the update.  In this example you will see the DatabaseSchemaUpdater in action.  Assuming we added a “Notes” field to the MyTable structure, the following code will check if the database is the latest version and add the field if it isn’t. if(!myDb.DatabaseExists()){ myDb.CreateDatabase();}else{ DatabaseSchemaUpdater dbUdater = myDb.CreateDatabaseSchemaUpdater(); if(dbUdater.DatabaseSchemaVersion < 2) { dbUdater.AddColumn<MyTable>("Notes"); dbUdater.DatabaseSchemaVersion = 2; dbUdater.Execute(); }} Summary This approach does take a fairly large amount of work, but I think the end product is robust and very native for .NET developers.  It turns out to be worth the investment. del.icio.us Tags: Windows Phone,Windows Phone 7,LINQ to SQL,LINQ,Database,Isolated Storage

    Read the article

  • Using XA Transactions in Coherence-based Applications

    - by jpurdy
    While the costs of XA transactions are well known (e.g. increased data contention, higher latency, significant disk I/O for logging, availability challenges, etc.), in many cases they are the most attractive option for coordinating logical transactions across multiple resources. There are a few common approaches when integrating Coherence into applications via the use of an application server's transaction manager: Use of Coherence as a read-only cache, applying transactions to the underlying database (or any system of record) instead of the cache. Use of TransactionMap interface via the included resource adapter. Use of the new ACID transaction framework, introduced in Coherence 3.6.   Each of these may have significant drawbacks for certain workloads. Using Coherence as a read-only cache is the simplest option. In this approach, the application is responsible for managing both the database and the cache (either within the business logic or via application server hooks). This approach also tends to provide limited benefit for many workloads, particularly those workloads that either have queries (given the complexity of maintaining a fully cached data set in Coherence) or are not read-heavy (where the cost of managing the cache may outweigh the benefits of reading from it). All updates are made synchronously to the database, leaving it as both a source of latency as well as a potential bottleneck. This approach also prevents addressing "hot data" problems (when certain objects are updated by many concurrent transactions) since most database servers offer no facilities for explicitly controlling concurrent updates. Finally, this option tends to be a better fit for key-based access (rather than filter-based access such as queries) since this makes it easier to aggressively invalidate cache entries without worrying about when they will be reloaded. The advantage of this approach is that it allows strong data consistency as long as optimistic concurrency control is used to ensure that database updates are applied correctly regardless of whether the cache contains stale (or even dirty) data. Another benefit of this approach is that it avoids the limitations of Coherence's write-through caching implementation. TransactionMap is generally used when Coherence acts as system of record. TransactionMap is not generally compatible with write-through caching, so it will usually be either used to manage a standalone cache or when the cache is backed by a database via write-behind caching. TransactionMap has some restrictions that may limit its utility, the most significant being: The lock-based concurrency model is relatively inefficient and may introduce significant latency and contention. As an example, in a typical configuration, a transaction that updates 20 cache entries will require roughly 40ms just for lock management (assuming all locks are granted immediately, and excluding validation and writing which will require a similar amount of time). This may be partially mitigated by denormalizing (e.g. combining a parent object and its set of child objects into a single cache entry), at the cost of increasing false contention (e.g. transactions will conflict even when updating different child objects). If the client (application server JVM) fails during the commit phase, locks will be released immediately, and the transaction may be partially committed. In practice, this is usually not as bad as it may sound since the commit phase is usually very short (all locks having been previously acquired). Note that this vulnerability does not exist when a single NamedCache is used and all updates are confined to a single partition (generally implying the use of partition affinity). The unconventional TransactionMap API is cumbersome but manageable. Only a few methods are transactional, primarily get(), put() and remove(). The ACID transactions framework (accessed via the Connection class) provides atomicity guarantees by implementing the NamedCache interface, maintaining its own cache data and transaction logs inside a set of private partitioned caches. This feature may be used as either a local transactional resource or as logging XA resource. However, a lack of database integration precludes the use of this functionality for most applications. A side effect of this is that this feature has not seen significant adoption, meaning that any use of this is subject to the usual headaches associated with being an early adopter (greater chance of bugs and greater risk of hitting an unoptimized code path). As a result, for the moment, we generally recommend against using this feature. In summary, it is possible to use Coherence in XA-oriented applications, and several customers are doing this successfully, but it is not a core usage model for the product, so care should be taken before committing to this path. For most applications, the most robust solution is normally to use Coherence as a read-only cache of the underlying data resources, even if this prevents taking advantage of certain product features.

    Read the article

  • Usage of IcmpSendEcho2 with an asynchronous callback

    - by Ben Voigt
    I've been reading the MSDN documentation for IcmpSendEcho2 and it raises more questions than it answers. I'm familiar with asynchronous callbacks from other Win32 APIs such as ReadFileEx... I provide a buffer which I guarantee will be reserved for the driver's use until the operation completes with any result other than IO_PENDING, I get my callback in case of either success or failure (and call GetCompletionStatus to find out which). Timeouts are my responsibility and I can call CancelIo to abort processing, but the buffer is still reserved until the driver cancels the operation and calls my completion routine with a status of CANCELLED. And there's an OVERLAPPED structure which uniquely identifies the request through all of this. IcmpSendEcho2 doesn't use an OVERLAPPED context structure for asynchronous requests. And the documentation is unclear excessively minimalist about what happens if the ping times out or fails (failure would be lack of a network connection, a missing ARP entry for local peers, ICMP destination unreachable response from an intervening router for remote peers, etc). Does anyone know whether the callback occurs on timeout and/or failure? And especially, if no response comes, can I reuse the buffer for another call to IcmpSendEcho2 or is it forever reserved in case a reply comes in late? I'm wanting to use this function from a Win32 service, which means I have to get the error-handling cases right and I can't just leak buffers (or if the API does leak buffers, I have to use a helper process so I have a way to abandon requests). There's also an ugly incompatibility in the way the callback is made. It looks like the first parameter is consistent between the two signatures, so I should be able to use the newer PIO_APC_ROUTINE as long as I only use the second parameter if an OS version check returns Vista or newer? Although MSDN says "don't do a Windows version check", it seems like I need to, because the set of versions with the new argument aren't the same as the set of versions where the function exists in iphlpapi.dll. Pointers to additional documentation or working code which uses this function and an APC would be much appreciated. Please also let me know if this is completely the wrong approach -- i.e. if either using raw sockets or some combination of IcmpCreateFile+WriteFileEx+ReadFileEx would be more robust.

    Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34  | Next Page >