Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 29/279 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Cannot boot from Yumi multiboot USB stick

  - by Amator

  I've just created a multiboot USB stick using Yumi. I tried to start my notebook (Asus K70IO) using it, but all I see is just a black screen with blinking underscore even after waiting for minutes. If during this time I remove the USB stick I get the message: "Operating system load error". How do I properly load my Yumi USB stick and use it? I've tried formatting it using Yumi's checkbox to format the stick in FAT32 too, but it didn't help. Now I tried to use Sardu 2.0.5 and met same problem: black screen and blinkin underscore, if I remove stick I see "Operating system load error" and my OS starts to boot. At the same time if I create bootable USB stick from ISO using UltraISO it boots smoothly.

  Read the article

• Problem with several USB devices on Windows XP. How to diagnose USB device?

  - by Lukasz Baran

  Hello All, Recently I've bought some electronic devices (like e.g. Sony Ebook reader PRS-600 or HP PDA IPaq) which are connected to PC using USB ports. These devices have own batteries and they are recharged using USB. However, I am experiencing a problem with Ebook Reader and the similiar thing happens with my PDA (but in this case it's more rare). Sometimes, I am unable to make it start recharging, when it's connected to USB port. The LCD diode on my Reader lights up and the icon in the system tray appears. They both indicate that the device has been connected. However, the device should start recharching and it should appear on Windows XP as a 'explorable' device (just like pendrive it offers some HDDs). None of these happens:( This problem appears on two PCs - desktop and laptop. Both have Windows XP SP3 installed. And what's interesting and surprising to me is the fact that these devices sometimes work without any problems. I mean, I just plug them in and they work properly. Besides that, there are some computers (I have tested a variety of possible conditions) on which the problem does not appear! I am confused and, on the other hand, determined to find out what is the real cause of such strange behavior. Maybe I'm wrong but I always assumed that I'm using deterministic machines, but the described situation makes me feel like I was dreaming:) And that's why I'm asking you here. Are there any tools that could help me diagnose USB ports? Or maybe anyone knows the solution? I have a lot experience with low level programming (mostly from the times of MS-DOS applications), but I'm not an expert when it comes to WinXP technology. If this was a problem with network connection, I would know what to do - I know how to track network traffic, but with USB ports I feel powerless. I have a feeling that the problem may lie in a way WinXP handles USB devices. Personally, I hate auto-discovery and P'n'P features available in Windows. I know that some of may suggest to move to Linux or other *Nix system. Unfortunately, I have to use WinXP in my professional life, so it's rather impossible. Besides that, I don't consider XP as a total disaster. Any help from you will be appreciated!

  Read the article

• USB seems to pause system

  - by Marco van de Voort

  I've an application that does some simple measuring, for which it polls a few 100kbs several times a second (8-25 times) The behaviour is not really dependant on chipset (happens on several mobo's intel 965- P55) and OSes (XPsp3 and win7). Also the make of the USB keyboard doesn't seem to matter. I notice that sometimes when an USB kbd is plugged in, the system pauses for say 500-1000ms. (about 900-1000ms on disconnect, and 400-500 on the subsequent connect) It also happens for other USB devices (most notably mice and massstorage devices), but only the first time such device is connected to an installation. This disrupts the measurement and I really would like to get rid on this. I already tried to disable as much as possible. (powersave, teletubby mode (*) etc), and while this helped with the non-USB related disruptions of the measurement, it doesn't help with the USB related ones. (*) fyi, turning off themes (to resp. classic/non-aero), and turning off effects in system solved problems that occured when minimizing/maximizing the app. Any pointers to look into? I'm a bit stuck with this.

  Read the article

• USB AutoRun Dialog: Open a webpage option not shown in dialog

  - by Jake M

  I am attempting to make our webpage open when someone plugs in our USB device. My Problem: When we plug in the USB device the autorun dialog appears but there is never an option to open/run the webpage we have specified. See below pic of the dialog we see. Isn't there meant to be an option that says something like "Open in Internet Explorer" or etc.? What we are hoping to achieve is to have another option below 'Use this drive for backup' that says something like 'Open in Web Browser' or something that will ultimately open our webpage when the users decides to. Heres our code that is inside the file autorun.inf which is placed on the USB device: [autorun] shellexecute=http://exds-test.epicservices.com.au/V10InstallationInfo.aspx action=Open Website label=EXDS USB Drive

  Read the article

• Can I format a usb stick on windows xp, in HFS+ format, and make the usb stick mac os x bootable?

  - by user717236

  My Intel Mac OS X computer is corrupt and I feel, at this point, I need to perform a fresh install of the OS. It consistently and automatically logs out, right after I log in. I tried logging in as the root. I tried safe boot and it wouldn't load. Anyway, the point is I want put the Mac OS X installer on a USB thumb drive and have it boot up on the Intel Mac OS X computer. Unfortunately, the computer is inaccessible, as I mentioned above. So, I have a Windows XP machine that I'm using and attempting to create a bootable USB thumb drive that's compatible with Mac OS X. I have tried transmac, macdrive, and paradox for windows -- all of which proved unable to format the usb stick in HFS+. How do I know this? Well, even though the Transmac reports that's been formatted to HFS+, Computer Management in Windows says otherwise: I even put the installer on the usb drive, after transmac reportedly formatted it properly, and the mac os x computer didn't even recognize that a USB thumb drive was inserted, via pressing the option key at boot-up time. I'm not sure what the problem is and how to actually format the drive. Can anybody offer any help? I would appreciate it. Thank you.

  Read the article

• CentOS 5 installation - GRUB installed on USB drive

  - by John

  Hi. I installed CentOS via unetbootin and USB stick. Unfortunately, I can not now start my system w/o my USB usb drive. Can someone provide me with some information how to fix this? Thanks.

  Read the article

• NTFS 'Owner' missing when accessing hard disk from external USB adapter

  - by trismarck

  I have a hard drive with Windows XP SP3 installed on it. When the drive is connected through the standard SATA connector inside the laptop, everything works as expected. However when I remove the drive from the laptop and connect the drive to the external USB adapter, almost all files / folders lose the 'Owner' field contents. I was wondering why could that be. I've tried two USB adapters and this happens on each. I could take the ownership of all of the files, but this would overwrite the Owner value (the Owner value that is present when the drive is accessed through standard SATA connector in the laptop). //edit: if the hard drive is used through the USB adapter, I can't access most of the files, at least until I take ownership of the files (/folders). This is how it looks like: HDD inside USB adapter: HDD inside laptop: (note the Owner column) //edit: some of the files on the first screenshot have Owner field filled up. That's because I took the ownership of those files / folders to be able to access the files on the hard drive. //edit2: also, if the hard drive is connected through USB adapter and if I've took the ownership of some files by the 'ddd' user, then if i login as a different user (lets say 'eee' user), the owner field is _still_ empty: ddd user: eee user: eee user can't access the 'ddd' folder. Both users have Administrator priviledges.

  Read the article

• Is there a USB 3.0 Thumb/stick Drive?

  - by jasondavis

  I am in search of USB 3.0 thumb drives. My new motherboard has support for eSATA, SATA 3, and USB 3.0 So I am hoping to find some USB 3.0 thumb drives/sticks. Do you know if such a drive exist yet?

  Read the article

• USB port causing device problems after new motherboard upgrade

  - by enbuyukfener

  I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

  Read the article

• USB Device With Embedded Fileserver

  - by Richard Martinez

  I'm attempting to access logs from a proprietary hardware box with no reasonable hope of modifying the software. There is a process on the device to dump log files to a flash drive on the USB port after entering a code sequence. Currently, analysis of the logs requires the following: Physical presence at the device Manual entry of the code sequence Removal of USB device Insertion of USB device into a normal Linux box I'm hoping there is some sort of device that can act as a USB mass storage device but simultaneously make it's contents available as a network file share (wired preferred). Does such a device currently exist? A combo hardware/software solution would also work.

  Read the article

• How to Mount a USB "Thumb" Drive as "Fixed" in Windows (For Indexing)

  - by AMissico

  I have over 8GB in my "Code Library" that I maintain on a 64GB ScanDisk Ultra Backup USB Device. Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot because the USB device identifies itself as a Removable drive and Windows 7 refuses to index removable drives. How can I mount the USB Thumb Drive as Fixed instead of Removable? All suggestions welcome and greatly appreciated.

  Read the article

• Latitude D600 USB port problem

  - by Moab

  Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

  Read the article

• Need Assistance on ASUS K55V USB ports not working

  - by Pascal Schilling

  I have a K55V ASUS laptop, W7 Home (64bit). Whenever I try to use a mouse (or any other USB device), it doesn't work because of a driver problem. The automatic update tries to update the driver and requires me to reboot directly after. It doesn't work. Windows update then wants to re-attempt the update and then I have to reboot (etc). Now, after 10 tries it still doesn't work. Can some one help me out on this? No USB ports work at the moment, it has 2 USB 3.0 ports and 1 USB 2.0 port.

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• Backup folder on sometimes attached external usb harddrive

  - by ctrler

  My girlfriend no longer has space her laptops drive to store her photos. The drive she has now is 750GB, so to go to a bigger drive would be expensive, as there isn't many 1.5tb 2.5 inch 9.5mm hdd on the market (as of now, there is only one). Because of that, I am thinking of moving her pictures to a cheap external usb hdd. As of now, I'm automatically backing up her important folders (My Documents, Pictures, etc.) using Windows 7 default backup software to a network drive. My problem is that I don't know of a good solution to automatically backup a folder residing on an usb disk. The usb disk won't be attached to the computer all the time, so I can't just treat it as a normal backup folder. Sometimes the backup would run and the folder would not be there! Anyone knows any software or methodology to backup folders on external usb hard drives that are not always present? Thanks

  Read the article

• Start Anew with my USB stick

  - by Asaf

  This story starts with me taking my USB stick to work and unplugging it by accident in the middle of a file transfer. The USB stopped working completely, now I have Linux Ubuntu on my Laptop at home So I tried messing around with Gparted and Fdisk and all it did Was making my USB stick be partition less and 8 MB instead of 2GB So instead of creating more havoc, I ask kindly for help. I tried going to fdisk /dev/sdb and inside there were no partitions, added a new one but that didn't really do anything, /dev/sdb1 was none-existent..

  Read the article

• USB devices don't work after restoring from Stand By

  - by Steve

  Hi. I'm running Windows XP SP3 on a NEC Versa L1100 laptop. If I wake my laptop up from Stand By, no attached USB devices will function. Device Manager shows all USB entries to be working properly. There is an option to "Allow the computer to turn off this device to save power" in the Power Management properties of USB entries. Is this causing the issue or something else? I have the latest drivers for my motherboard installed.

  Read the article

• USB drivers stopped working in Windows 8

  - by Maxim V. Pavlov

  I have installed an MSDN version of Windows 8 Professional (x64) RTM. For about 3 restarts everything worked well. But once I've rebooted again - USB drivers (all of them, inluding the USB 3 drivers) stopped working. Device Manager properties said that the USB driver is not compatible with the system. Gigabyte doesn't list Windows 8 drivers for my MB X58A-UD3R. Tried to reinstall windows 7 USB drivers - system said the current driver is fine and didn't want to reinstall. Is this the common Windows 8 problem? How can solve it or debug it even more?

  Read the article

• Creating bootable Fedora USB with persistent storage

  - by dooffas

  I am attempting to burn the full Fedora 19 x86_64 DVD iso to a USB drive and have a separate partition on it for a kickstart file / other media that will be installed in the kickstart process. With the Ubuntu server 12 iso, you can simply dd the iso to the usb drive: dd if=/path/to/iso of=/dev/sdb Once the iso has been burnt, open gparted and create a ext2 parition in the allocated space. However, this does not seem to work with the Fedora ISO. When loading the USB drive in gparted I get a warning and an error: Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. Error: The partition's data region doesn't occupy the entire partition. Ignoring both of these errors allows gparted to load the usb drive, however it shows a blank drive with no partition table. Has anyone come across this before? From what I have found, it may have something to do with the fact that Fedora use isohybrid.

  Read the article

• "Boot Error" message when booting Ubuntu 9.10 from USB sticks (Occurs only on 1 PC)

  - by xeross

  Hey, Since today suddenly both my USB ubuntu installations (2 different USB sticks) try to boot and nothing loads but all I see is a message saying "Boot Error". When I press space it continues booting from the main hard drive. I tried reinstalling ubuntu on the USB stick but same error. This only happens on 1 computer and started happening today, before it worked just fine. Any idea what's causing this ? Regards, Xeross

  Read the article

• Cheap NAS for connecting a USB drive to the network

  - by olaeld

  I am looking for a cheap way of hooking up a USB drive to the LAN. This could be a router with a USB port, or possibly a more regular NAS device with a USB port. I am hoping to find something below $200. But if there is a device with "magical properties" I may be interested to hear about it anyway.

  Read the article

• Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

  - by user93353

  I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

  Read the article

• Performance of external USB disk with ESXi5

  - by PeterMmm

  I have a new HP DL120 G7 server with ESXi5. One VM is a Win2003 instalation and I have an external USB2.0 drive attached by USB Controller and USB Device. I copy a 4GB file from external USB to server disk. In the VM that takes up to 10 minutes. On a native Win2003 that takes aprox. 3 minutes. I have no explaination for that diference: In any case the bottleneck is the USB connection, much slower than the disks (SAS, RAID1). If the USB connection on the VM would be USB1.1 and not USB2.0 it would take much more time. (The disk performance between server partitions on the VM is correct. - see update) Could be that my native box is extremely fast and the VM is the normal case. ??? Update I try with passtrough and a first run copy the same data in aprox. 7 minutes. Still 2 times slower than the native connection. I also did another messure and the copy between partitions on the same VM takes 3 minutes.

  Read the article

• CentOS 5 installation - GRUB installed on USB drive

  - by John

  Hi. I installed CentOS via unetbootin and USB stick. Unfortunately, I can not now start my system w/o my USB usb drive. Can someone provide me with some information how to fix this? Thanks.

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >