Search Results

Search found 62943 results on 2518 pages for 'windows installation'.

Page 29/2518 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• How to shrink Windows partition with unmovable files in dual boot installation

  - by Tim

  To install Ubuntu alongside Windows 7, I have to shrink Windows 7 partition C:. But due to some unmovable files, I cannot shrink as much as I plan by using Windows own shrinking tool. I guess many of you who have both OSes on the same hard drive must have similar experience. How to solve this problem? Any reference that can help is also appreciated! Thanks and regards! UPDATE: I have identified what unmovable file currently stop further shrinking: \ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010015.wid::$DATA If I understand correctly, the file belongs to Windows Search. Can I set up somewhere in Windows system settings to temperately eliminate the file and similar ones (because there are many similar files under the same directory which I guess will also stand in the way of shrinking and unmovable by defrag)?

  Read the article

• Configure Windows firewall to prevent an application from listening on a specific port

  - by U-D13

  The issue: there are many applications struggling to listen on port 80 (Skype, Teamviewer et al.), and to many of them that even is not essential (in the sense that you can have a httpd running and blocking the http port, and the other application won't even squeak about being unable to open the port). What makes things worse, some of the apps are... Well, I suppose, that it's okay that the mentally impaired are being integrated in the society by giving them a job to do, but... Programming requires some intellectual effort, in my humble opinion... What I mean is that there is no way to configure the app not to use specific ports (that's what you get for using proprietary software) - you can either add it to windows firewall exceptions (and succumb to undesired port opening behavior) or not (and risk losing most - if not all - of the functionality). Technically, it is not impossible for the firewall to deny an application opening an incoming port even if the application is in the exception list. And if this functionality is built into the Windows firewall somewhere, there should be a way to activate it. So, what I want to know is: whether there exists such an option, and if it does how to activate it.

  Read the article

• Windows 7, network shares, and authentication via local group instead of local user

  - by Donovan

  I have been doing some troubleshooting of my home network lately and have come to an odd conclusion that I was hoping to get some clarification on. I'm used to managing share permissions in a domain environment via groups instead of individual user accounts. I have a box at home running windows 7 ultimate and I decided to share some directories on that machine. I set it up to disallow guest access and require specifically granted permissions. (password moe?). Anyway, after a whole bunch of time i figured out that even though the shares I created were allowed via a local group i could not access them until i gave specific allowance to the intended user. I just didn't think i would have to do that. So here is the breakdown. Network is windows workgroup, not homegroup or nt domain PC_1 - win 7 ultimate - sharing in classic mode - user BOB - groups Admins PC_2 - win 7 starter - client - user BOB - groups admins PC_3 - win xp pro - client - user BOB - groups admins the share on PC_1 granted permission to only the local group administrators. local user BOB on PC_1 was a member of administrators. Both PC_2 and PC_3 could not browse the intended share on PC_1 because they were denied access. Also, no challenge was presented. They were simply denied. After adding BOB specifically to the intended share everything works just fine. Remember, its not an nt domain just a workgroup. But still, shouldn't i be able to manage share permissions via groups instead of individual user accounts? D.

  Read the article

• Random Windows application crashes on Windows Server Hyper-V Core 2012

  - by Marlamin

  We're having some issues with our Hyper-V Core 2012 R2 installation on a HP DL360G8. We have an identical server with Hyper-V Core 2012 (not R2) that does not have these issues. When logging off from the physical server/via remote desktop, we sometimes get this error: Configure-SMRemoting.exe - Application Error : The application was unable to start correctly (0xc0000142). Click OK to close the application. We've also once or twice seen a "memory could not be read" error mentioning LoginUI.exe (another Windows app in System32) but have been unable to get an exact description. It's rather worrying to get such errors on a fresh install of Hyper-V 2012 R2. Is this even anything to worry about? Things we've done: Memtest86+, no memory errors Checksummed the file that is crashing with the one in the verified correct ISO, files match Server firmware upgrade to latest firmware of all present hardware, no visible changes Remade the RAID5 array , no change Reinstalled a few times, no change Reinstall without applying Windows updates after, no change

  Read the article

• Unable to install Windows Installer 4.5 on Windows Server 2008

  - by Tim Trout

  One of the prerequisites for installing SQL Server 2008 Express R2 is Windows Installer 4.5. I have a couple of WS2008 machines I'm prepping, so I downloaded the appropriate version of the file (Windows6.0-KB942288-v2-x86.msu) to our file server and tried isntalling it on both machines. On both machines I get the cryptic 0x80070003 error: "the system cannot find the file specified", but it does not show which file it cannot find. I don't get this when I try to install the Windows XP version on one of my XP machines. Any clues as to what I might be missing or doing wrong? One Technet help forum suggested I try installing the "System Update Readiness Tool", but this installer also fails for the same error code.

  Read the article

• Runas Windows Explorer in Windows 7

  - by nsr81

  Hi All, Having a strange issue with Windows Explorer on Windows 7 Professional. When I try to open it up under different user credentials, I get the following error message: Results are the same whether I try it from the context menu or by using runas /user:DOMAIN\User explorer.exe However, if I open up a command prompt (using runas.exe) the behavior is a bit different: typing in just explorer or explorer.exe results in the same error. typing in explorer C: or explorer /E,... doesn't run anything. I'm dropped right back to the prompt. explorer process doesn't start. Has anyone seen this behavior before? If so, how can I go about changing it. Thanks.

  Read the article

• Windows 7 + Deep Freeze - I'm stuck in an endless reboot loop

  - by myermian

  I have the following setup: Windows 7 Ultimate Deep Freeze I "thawed" my machine last night and performed a Windows Update. The update is having issues (it gets stuck at 32%, fails, and restarts my machine). When it reboots it attempts it again, and again, and again, etc. (Endless loop). I looked online and found some solutions, but none of them seem to be working: When I run Safe Mode, Safe Mode w/ Network, or Safe Mode w/ Command Prompt it attempts to revert the Windows Update changes. However, the problem is with Deep Freeze on (and now in "Frozen" mode) the reverted changes don't stay, and I'm back into the loop of death. Oh, and side note: "Safe Mode w/ Command Prompt" does not actually take me to a command prompt window? Perhaps because it is attempting to complete the Windows Update changes first? I have tried to select the option to NOT restart when an windows error occurs, but it still does. I tried the remainder of all the other options in the F8 screen. The only other option left is to find my Windows 7 Media Disc (I can't find it right now) and use it to repair windows (because for some reason the repair option does not show up in the F8 screen). Is there a way to disable Deep Freeze from loading? When I selected "Safe Mode w/ Command Prompt" I noticed that it loads the DpFrz.sys file. I know that when I'm in the Windows Boot Manager if I press F10 instead of F8 (while highlighting Windows 7) it takes me to an "Edit Boot Options" screen: Edit Windows boot options for: Windows 7 Path: \Windows\system32\winload.exe Partition: 2 Hard Disk: 8e90e329 [ /NOEXECUTE=OPTIN (I CAN EDIT THIS LINE) ] Update: I found my Windows 7 Media Disk and it did not help out. The laptop had the "System Restore" as a partition on the HDD. I later received (in the mail) a Windows 7 Upgrade Disc from Sony to upgrade my system from Windows Vista to Windows 7 Ultimate. I placed the disc into the DVD drive and it does not come up as a "bootable" disc. I'm going to try to find an alternative disc to see if I can get into Command Prompt. Update 2: I got a Windows Repair disc and got into a command prompt window. I got into the registry and disabled Deep Freeze. Also: I renamed the Pending.xml file to Pending.old I cleared out the Windows Temp directory I still am stuck in the loop (though, it isn't an issue with DeepFreeze anymore because I can make changes to the hard drive and they persist). Not sure what to do at this point? Update 3: I ran the repair option and it couldn't repair, but it did point me to something. It says the error was due to a driver that was failing. I have a feeling it is my UPEK Fingerprint scanner.

  Read the article

• Accessing SQL Server over Workgroup

  - by Brian

  Hello, I have two machines: A: Win 2008 server B: Windows 7 They are on the same workgroup, and I enabled network discovery. So on the server, I have SQL Server installed with a SQL Server account (mixed mode is enabled). I'm trying to connect to this server from the win 7 machine in the workgroup, but no go. Do I have to reference the server by something else than machine name? How do I successfully establish that relation? I am a n00b to this type of thing... Thanks.

  Read the article

• I split partition in Windows 7 home edition but the Windows doesn't reboot

  - by Samnan

  I Have Geniune Windows 7 home edition and my Laptop is Pavilion HP DV6 . I had only 1 partition of 500+ GB i Wanted to make another partition. I read somewhere in forum that I have to make my C: logical and then I'd be able to split C: I did the same thing using Partition Wizard. I made C: of 125 GB and shift rest of the space in New drive. I made a bootable disk, performed all the task using partition Wizard After that I have not been able to boot my windows. Even after running system restore several times.

  Read the article

• Windows 8 Login Password Out of Sync with Windows Live ID

  - by Israel Lopez

  I'm working with a computer that has setup a local account connected under Windows Live ID. The user can login to Live ID (like hotmail) from another computer with the correct credentials. However from the Windows 8 computer using the correct password it indicates. That password is incorrect. Make sure you're using the password for you Mircrosoft Account. You can always reset it at account.live.com/password/reset. Now, I've used NTPASSWD to reset the password, but it seems that since its not a "Local Account" it wont take the new password or blank one. This account also has a "PIN" the user who also has forgotten it. I also tried to enable/password set the local Administrator account but it does not show up for login. Any ideas?

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Weirdness After Reinstall The Windows Operating System

  - by Eka Anggraini

  I want to ask, and ask advice from you guys. I have reinstall my OS and successful, I'm turn off the restart a few times is fine .. Later a few hours later, when I turn it on, a sudden there was an error : Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM Select 'R' at the first screen to start repair. So I intend to repair, reinstall all again .. I enter cd windows : press any key .. with blue background text below: Setup is loading files (windows executive) Setup is loading files (hardware abstraction layer) Then I was waiting until half an hour, and no changes, I repeated the process several times is also nil. Please advice and solutions about the problem where? Hardware / cd Windows ?

  Read the article

• Windows 7 Upgrade from an OEM disc

  - by user1026361

  I recently bought a new laptop with Windows 7 Home Premium and a Windows 7 Pro Upgrade key. It also comes with a cavalcade of bloatware. I would like to start with a fresh install of Windows. I understand that I can upgrade to W7Pro using the option in the Home Premium Start menu. However, I also own a Windows 7 Pro OEM installation disc from another computer. Can I use this Windows 7 Pro OEM disc to install Windows, and when it asks me for my key, provide the upgrade key purchased? Or am i required to install Home Premium first and then apply my upgrade key?

  Read the article

• Live Mesh starts exactly once on fresh Win7 Ultimate installation

  - by Reb.Cabin

  I did a fresh install of Windows 7 Ulimate 64-bit on a formatted drive on a refurbed Lenovo PC, applied all 102 (!) windows updates, windows seems to be working fine. No quirks installing, no apps, no junkware, just straight, legal, Win7 Ultimate right from an unopened 2009 Microsoft box. Ok, breathe sigh -- Install Live Mesh (no messenger, no mail, no writer, no photo, none of the rest of the Windows Live freeware). Set up my shares, let it run overnight. watch MOE.exe in the Task-Manager perf pane to make sure it's all settled down. reboot. Ok, check that MOE is running and files are getting updated properly from other machines in the mesh. Great. HOWEVER -- when I try to launch Windows Live Mesh app from the Start jewel, I get a brief hourglass, then nothing. Reboot. Same story. result -- the shares I already posted seem to be synching properly, but I can't run the app, so I can't add and delete shares. The background process MOE seems to run, but I can't get the app going. btw, the reason I did this fresh install is I had exactly the same experience running Vista, so I wiped the machine hoping it would solve this nasty problem. Imagine my surprise! Will be grateful for clues, advice, etc, please & thanks!

  Read the article

• windows 2003 under Hyper-V - can't send/receive ping

  - by glaucon

  I've installed Windows 2003 x64 R2 SP2 under Hyper-V (the Windows Pro 8 edition). I have a NIC configured but I can't move any traffic on it. In particular I can't send or receive Pings. Scoreboard There is a second VM running Ubuntu under the Windows 8 host which is able to send and receive pings from the host O/S . When I try to ping from Windows 2003 guest to Windows 8 host I get 'Request Timed Out'. When I try to ping from Windows 8 host to Windows 2003 guest I get 'Reply from 192.168.10.107 Destination Host Unreachable'. There's no problem pinging from the Ubuntu guest to the Windows 8 host and no problem pinging from the Windows 8 host to the Unbuntu guest. Environment Integration services are installed on Windows 2003. The windows 2003 needs a static IP address of 192.168.10.15. The Windows 2003 ipconfig output looks like this : While the host o/s ipconfig output looks like this : Event Logs The only things I can see in the event logs which is (a) looks signifcant and (b) is not related to the lack of networking is this : I'm not sure if that's significant or not. Hyper-V and NICs When the Windows 2003 guest was first booted it had no NIC; I subsequently added a 'Legacy Network Connector' which I couldn't get Windows 2003 to recognise; I subsequently removed that and added a 'Standard Network Connector' and at least on the surface this works ... only it doesn't. 'Virtual Network Type' is external. Although I've only mentioned ping there's no other evidence of network activity. 'Allow incoming echo request' is enabled on the Windows 2003 guest. HELP ? What else should I look at or do to resolve this problem ? EDIT 1: I should have said that I turned off the firewall on the W2003 server for a while and retested the pings; same result.

  Read the article

• Missing disc when installing windows 7

  - by Anders

  Hi, when I was installing windows 7 on my new bought computer it asked me on which disc I would like to install the OS on, either the 1 tera byte disc or the ssd disc, I chose to install it on the ssd disc. But now when I have installed the OS, the 1 tera byte disc isn't visible in "my computer" and I don't know how to access it, I didn't do anything strange in the installation, that by the way is idiot secure. So my question, what do you think have happend and how do you believe that this issue is solved? Regards Anders

  Read the article

• Cannot install Windows 8 Transformation Pack on Windows 7

  - by Mehper C. Palavuzlar

  I am trying to install Windows 8 Transformation Pack v4.0 on my Sony Vaio laptop with the following options: When I run (as administrator) the setup file, it starts to install but gives the following error at some point: The file 'C:\Windows\Fonts\segoui.ttf' could not be opened. Please check that your disk is not full and that you have access to the destination directory. Since I run the installer as administrator, this error message seems strange to me. Segoe UI font is also installed on my PC. When I try to install with default system fonts (without Segoe UI), it gives the same error again: What should I do to solve this problem?

  Read the article

• Windows alternatives to Windows Media Centre

  - by zillion

  What replacement options are available for Windows Media Centre to watch TV, Get Programming Guides etc?

  Read the article

• High availability for Windows Service under Windows Server 2003

  - by empi

  Hi. I have a following situation: I need to deploy a windows service that listens for incoming request on tcp port (basically WCF service). I have a High Availability requirement - the service must be deployed on two servers and if the service stops (only the service, not the whole server) on one server, all the requests must be redirected to the second one. For me it looks like a basic failover scenario. How can I achieve this on Windows Server 2003? Should I use Microsoft Cluster Service or Network Load Balancing? The important part is that the process of swapping the servers should not concern the clients (the client must see only single address / single host or domain name). Thanks in advance for help.

  Read the article

• My computer resets when i try to install Windows 7 (USB/DVD)

  - by Ranhiru

  I had a troublesome software starting up when Windows 7 was starting and i had no way to remove it because i couldn't log in to Windows. Not even safe mode. But i used Hiren's Boot CD to edit the registry to stop that software from starting up... But my efforts were not useful as Windows kept on going to an ultimate freeze just before the login screen should have been shown. And just freezes and I cannot do anything. So i decided heck with it and i now want to format the disk and reinstall a fresh copy of Windows 7. But now regardless of USB or DVD i use to boot the setup, it loads fine till you see the animating Windows and it just resets the laptop! Just plain resets! Hiren's Boot CD and Mini XP, strange enough but still works :( Any ideas what might be causing the laptop to reset in Windows 7 setup?

  Read the article

• Timeout option not working on efi windows 7/windows8 dual boot machine

  - by Guenter

  I hav a gigbyte GA-Z77m-D3h mobo and installed Windows 8 Pro and Windows 7 Ultimate on two SSDs (in that order) in EFI mode. Now when I start my computer, I get the windows boot menu (text mode) with the two OSses to choose, but I have to manually press RETURN to have the computer boot into the Win OS. Even if I wait an hour, no default action takes place. Using bcdedit (from either of the OSses) I can successfully change the time out value, and it shows up in the bcdedit (no params) output. But it doesn't fire ... Here is my current BCDEdit output (headers are in German, but values should be readable): Windows-Start-Manager --------------------- Bezeichner {bootmgr} device partition=O: path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale de-DE inherit {globalsettings} integrityservices Enable default {default} resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} displayorder {default} {current} {5ad2802a-c60a-11e2-acdb-80331c501b11} {5ad28028-c60a-11e2-acdb-80331c501b11} {5ad28029-c60a-11e2-acdb-80331c501b11} toolsdisplayorder {memdiag} timeout 5 displaybootmenu Yes Windows-Startladeprogramm ------------------------- Bezeichner {default} device partition=W: path \Windows\system32\winload.efi description Windows 7 locale de-DE inherit {bootloadersettings} recoverysequence {5ad2802e-c60a-11e2-acdb-80331c501b11} recoveryenabled Yes osdevice partition=W: systemroot \Windows resumeobject {5ad2802c-c60a-11e2-acdb-80331c501b11} nx OptIn Windows-Startladeprogramm ------------------------- Bezeichner {current} device partition=C: path \Windows\system32\winload.efi description Windows 8 locale de-DE inherit {bootloadersettings} recoverysequence {5ad28033-c60a-11e2-acdb-80331c501b11} integrityservices Enable recoveryenabled Yes isolatedcontext Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \Windows resumeobject {5ad28031-c60a-11e2-acdb-80331c501b11} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto (this output is from Win8; the Win7 looks nearly identical) If maybe the problem comes from a bad EFI Windows boot manager installation, can this be fixed without loosing my windows installations?

  Read the article

• Set Default Program for All Users on Server

  - by MattN

  I work with a large server environment that's running Windows Server 2003, 2008, and 2012 now on some boxes. We have a custom-built log viewer program that associates with two file types that I'd like to set to be the default program for all users across all boxes, so new users don't have to set the default program themselves on every box they log into. Ideally I'd like to have a simple registry script we could push out to all machines at once. I realize this likely means changing the registry entries for either HKCR or HKLM for the file extensions, but adding the program location with %1 extension to \shell\open\command value in HKLM simply opens the program and does not also load the log file. Am I just missing an open and play setting, or am I looking at this entirely wrong? (And I know the script will need to be different for 2003 and 2008, but changing the version for two scripts isn't hard) Thanks!

  Read the article

• DDRescue on Windows or another options like DDRescue for Windows

  - by Frank Thornton

  I have a drive with failed sectors ect... I can't image it with Acronis as it hangs. I can't with Knoppiz it hangs. CHKDSK hangs. I want to use DDRescure but I don't have any Linux boxes running at the moment. I could do is in a VM but that seems like it would be slow and problematic? Are there any ways I can data recovery this disk from my Windows machine or is there an ideal way to work with DDRescue on Windows?

  Read the article

• Annoying Windows Explorer bar present on OEM Preinstalled Windows 7

  - by Velcro

  We have recently got some preconfigured ready-to-use computers. During some checks, I saw a strange bar located between address bar and toolbar in Windows Explorer. I removed all trialware and Google Toolbar as well, but this bar doesn't go away. What can I do to remove it? EDIT: My personal computer looks like this: Also, cursor changes to when I hover the bar. EDIT: On another OEM installation, there isn't the bar:

  Read the article

• windows hosted networok on windows 8

  - by tanmaysingh

  my sister is using Acer laptop, that has an intel WLAN card and supports windows hosted network(checked in command prompt).Am using the basic way using netsh wlan command also, then am using netsh start wlan command.The hosted network gets created and it could b seen in "Network and Sharing Center" as the . I also went to Device manager, selected WLan card, made sure"allow this device to wake computer from sleep" is selected. Now I went to the newly created , clicked properties, and under sharing enabled allow this to be shared(but I am not able to select The name of the wifi my sis wants to share (in this case her college wifi name, LEts say QP4,Ethernet and Local Area connection are the only two option that are coming). Also the SSID name is not being shown in her mobile nor when I click the tower icon at the tray area,Any suggestions on what might be going wrong?She is using windows 8. Should I look for updated drivers? Her laptop is only 6 months old, i don't think the drivers are outdated. Any advice shall be appreciated.

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >