Search Results

Search found 7870 results on 315 pages for 'auto increment'.

Page 291/315 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • People, Process & Engagement: WebCenter Partner Keste

    - by Michael Snow
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Within the WebCenter group here at Oracle, discussions about people, process and engagement cross over many vertical industries and products. Amidst our growing partner ecosystem, the community provides us insight into great customer use cases every day. Such is the case with our partner, Keste, who provides us a guest post on our blog today with an overview of their innovative solution for a customer in the transportation industry. Keste is an Oracle software solutions and development company headquartered in Dallas, Texas. As a Platinum member of the Oracle® PartnerNetwork, Keste designs, develops and deploys custom solutions that automate complex business processes. Seamless Customer Self-Service Experience in the Trucking Industry with Oracle WebCenter Portal  Keste, Oracle Platinum Partner Customer Overview Omnitracs, Inc., a Qualcomm company provides mobility solutions for trucking fleets to companies in the transportation industry. Omnitracs’ mobility services include basic communications such as text as well as advanced monitoring services such as GPS tracking, temperature tracking of perishable goods, load tracking and weighting distribution, and many others. Customer Business Needs Already the leading provider of mobility solutions for large trucking fleets, they chose to target smaller trucking fleets as new customers. However their existing high-touch customer support method would not be a cost effective or scalable method to manage and service these smaller customers. Omnitracs needed to provide several self-service features to make customer support more scalable while keeping customer satisfaction levels high and the costs manageable. The solution also had to be very intuitive and easy to use. The systems that Omnitracs sells to these trucking customers require professional installation and smaller customers need to track and schedule the installation. Information captured in Oracle eBusiness Suite needed to be readily available for new customers to track these purchases and delivery details. Omnitracs wanted a high impact User Interface to significantly improve customer experience with the ability to integrate with EBS, provisioning systems as well as CRM systems that were already implemented. Omnitracs also wanted to build an architecture platform that could potentially be extended to other Portals. Omnitracs’ stated goal was to deliver an “eBay-like” or “Amazon-like” experience for all of their customers so that they could reach a much broader market beyond their large company customer base. Solution Overview In order to manage the increased complexity, the growing support needs of global customers and improve overall product time-to-market in a cost-effective manner, IT began to deliver a self-service model. This self service model not only transformed numerous business processes but is also allowing the business to keep up with the growing demands of the (internal and external) customers. This solution was a customer service Portal that provided self service capabilities for large and small customers alike for Activation of mobility products, managing add-on applications for the devices (much like the Apple App Store), transferring services when trucks are sold to other companies as well as deactivation all without the involvement of a call service agent or sending multiple emails to different Omnitracs contacts. This is a conceptual view of the Customer Portal showing the details of the components that make up the solution. 12.00 The portal application for transactions was entirely built using ADF 11g R2. Omnitracs’ business had a pressing requirement to have a portal available 24/7 for its customers. Since there were interactions with EBS in the back-end, the downtimes on the EBS would negate this availability. Omnitracs devised a decoupling strategy at the database side for the EBS data. The decoupling of the database was done using Oracle Data Guard and completely insulated the solution from any eBusiness Suite down time. The customer has no knowledge whether eBS is running or not. Here are two sample screenshots of the portal application built in Oracle ADF. Customer Benefits The Customer Portal not only provided the scalability to grow the business but also provided the seamless integration with other disparate applications. Some of the key benefits are: Improved Customer Experience: With a modern look and feel and a Portal that has the aspects of an App Store, the customer experience was significantly improved. Page response times went from several seconds to sub-second for all of the pages. Enabled new product launches: After successfully dominating the large fleet market, Omnitracs now has a scalable solution to sell and manage smaller fleet customers giving them a huge advantage over their nearest competitors. Dozens of new customers have been acquired via this portal through an onboarding process that now takes minutes Seamless Integrations Improves Customer Support: ADF 11gR2 allowed Omnitracs to bring a diverse list of applications into one integrated solution. This provided a seamless experience for customers to route them from Marketing focused application to a customer-oriented portal. Internally, it also allowed Sales Representatives to have an integrated flow for taking a prospect through the various steps to onboard them as a customer. Key integrations included: Unity Core Salesforce.com Merchant e-Solution for credit card Custom Omnitracs Applications like CUPS and AUTO Security utilizing OID and OVD Back end integration with EBS (Data Guard) and iQ Database Business Impact Significant business impacts were realized through the launch of customer portal. It not only allows the business to push through in underserved segments, but also reduces the time it needs to spend on customer support—allowing the business to focus more on sales and identifying the market for new products. Some of the Immediate Benefits are The entire onboarding process is now completely automated and now completes in minutes. This represents an 85% productivity improvement over their previous processes. And it was 160 times faster! With the success of this self-service solution, the business is now targeting about 3X customer growth in the next five years. This represents a tripling of their overall customer base and significant downstream revenue for the ongoing services. 90%+ improvement of customer onboarding and management process by utilizing, single sign on integration using OID/OAM solution, performance improvements and new self-service functionality Unified login for all Customers, Partners and Internal Users enables login to a common portal and seamless access to all other integrated applications targeted at the respective audience Significantly improved customer experience with a better look and feel with a more user experience focused Portal screens. Helped sales of the new product by having an easy way of ordering and activating the product. Data Guard helped increase availability of the Portal to 99%+ and make it independent of EBS downtime. This gave customers the feel of high availability of the portal application. Some of the anticipated longer term Benefits are: Platform that can be leveraged to launch any new product introduction and enable all product teams to reach new customers and new markets Easy integration with content management to allow business owners more control of the product catalog Overall reduced TCO with standardization of the Oracle platform Managed IT support cost savings through optimization of technology skills needed to support and modify this solution ------------------------------------------------------------ 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif";}

    Read the article

  • Dual Monitor (Monitor and TV)

    - by umpirsky
    I connected TV to my computer, and trying to set dual display. Whatever resolution I choose for my second display (TV) I get message like this: The selected configuration for displays could not be applied required virtual size does not fit available size: requested=(2704, 1050), minimum=(320, 200), maximum=(1680, 1680) How can I fix this? Also, while I was experimenting system went to deadlock, I restarted and after boot monitor just turns off once system is up. I boot in recovery mode and after several retries fixed it somehow, I don't know how, probably by changing display config from display manager. now I found xorg.conf.new file in my home dir: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "extmod" Load "dbe" Load "glx" Load "dri" Load "dri2" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Can I delete it? Second display (TV) only works when I check Mirror displays option.

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • Day 3 - XNA: Hacking around with images

    - by dapostolov
    Yay! Today I'm going to get into some code! My mind has been on this all day! I find it amusing how I practice, daily, to be "in the moment" or "present" and the excitement and anticipation of this project seems to snatch it away from me frequently. WELL!!! (Shakes Excitedly) Let's do this =)! Let's code! For these next few days it is my intention to better understand image rendering using XNA; after said prototypes are complete I should (fingers crossed) be able to dive into my game code using the design document I hammered out the other night. On a personal note, I think the toughest thing right now is finding the time to do this project. Each night, after my little ones go to bed I can only really afford a couple hours of work on this project. However, I hope to utilise this time as best as I can because this is the first time in a while I've found a project that I've been passionate about. A friend recently asked me if I intend to go 3D or extend the game design. Yes. For now I'm keeping it simple. Lastly, just as a note, as I was doing some further research into image rendering this morning I came across some other XNA content and lessons learned. I believe this content could have probably been posted in the first couple of posts, however, I will share the new content as I learn it at the end of each day. Maybe I'll take some time later to fix the posts but for now Installation and Deployment - Lessons Learned I had installed the XNA studio  (Day 1) and the site instructions were pretty easy to follow. However, I had a small difficulty with my development environment. You see, I run a virtual desktop development environment. Even though I was able to code and compile all the tutorials the game failed to run...because I lacked a 3D capable card; it was not detected on the virtual box... First Lesson: The XNA runtime needs to "see" the 3D card! No sweat, Il copied the files over to my parent box and executed the program. ERROR. Hmm... Second Lesson (which I should have probably known but I let the excitement get the better of me): you need the XNA runtime on the client PC to run the game, oh, and don't forget the .Net Runtime! Sprite, it ain't just a Soft Drink... With these prototypes I intend to understand and perform the following tasks. learn game development terminology how to place and position (rotate) a static image on the screen how to layer static images on the screen understand image scaling can we reuse images? understand how framerate is handled in XNA how to display text , basic shapes, and colors on the screen how to interact with an image (collision of user input?) how to animate an image and understand basic animation techniques how to detect colliding images or screen edges how to manipulate the image, lets say colors, stretching how to focus on a segment of an image...like only displaying a frame on a film reel what's the best way to manage images (compression, storage, location, prevent artwork theft, etc.) Well, let's start with this "prototype" task list for now...Today, let's get an image on the screen and maybe I can mark a few of the tasks as completed... C# Prototype1 New Visual Studio Project Select the XNA Game Studio 3.1 Project Type Select the Windows Game 3.1 Template Type Prototype1 in the Name textbox provided Press OK. At this point code has auto-magically been created. Feel free to press the F5 key to run your first XNA program. You should have a blue screen infront of you. Without getting into the nitty gritty right, the code that was generated basically creates some basic code to clear the window content with the lovely CornFlowerBlue color. Something to notice, when you move your mouse into the window...nothing. ooooo spoooky. Let's put an image on that screen! Step A - Get an Image into the solution Under "Content" in your Solution Explorer, right click and add a new folder and name it "Sprites". Copy a small image in there; I copied a "Royalty Free" wizard hat from a quick google search and named it wizards_hat.jpg (rightfully so!) Step B - Add the sprite and position fields Now, open/edit  Game1.cs Locate the following line:  SpriteBatch spriteBatch; Under this line type the following:         SpriteBatch spriteBatch; // the line you are looking for...         Texture2D sprite;         Vector2 position; Step C - Load the image asset Locate the "Load Content" Method and duplicate the following:             protected override void LoadContent()         {             spriteBatch = new SpriteBatch(GraphicsDevice);             // your image name goes here...             sprite = Content.Load<Texture2D>("Sprites\\wizards_hat");             position = new Vector2(200, 100);             base.LoadContent();         } Step D - Draw the image Locate the "Draw" Method and duplicate the following:        protected override void Draw(GameTime gameTime)         {             GraphicsDevice.Clear(Color.CornflowerBlue);             spriteBatch.Begin(SpriteBlendMode.AlphaBlend);             spriteBatch.Draw(sprite, position, Color.White);             spriteBatch.End();             base.Draw(gameTime);         }  Step E - Compile and Run Engage! (F5) - Debug! Your image should now display on a cornflowerblue window about 200 pixels from the left and 100 pixels from the top. Awesome! =) Pretty cool how we only coded a few lines to display an image, but believe me, there is plenty going on behind the scenes. However, for now, I'm going to call it a night here. Blogging all this progress certainly takes time... However, tomorrow night I'm going to detail what we just did, plus start checking off points on that list! I'm wondering right now if I should add pictures / code to this post...let me know if you want them =) Best Regards, D.

    Read the article

  • Using the jQuery UI Library in a MVC 3 Application to Build a Dialog Form

    - by ChrisD
    Using a simulated dialog window is a nice way to handle inline data editing. The jQuery UI has a UI widget for a dialog window that makes it easy to get up and running with it in your application. With the release of ASP.NET MVC 3, Microsoft included the jQuery UI scripts and files in the MVC 3 project templates for Visual Studio. With the release of the MVC 3 Tools Update, Microsoft implemented the inclusion of those with NuGet as packages. That means we can get up and running using the latest version of the jQuery UI with minimal effort. To the code! Another that might interested you about JQuery Mobile and ASP.NET MVC 3 with C#. If you are starting with a new MVC 3 application and have the Tools Update then you are a NuGet update and a <link> and <script> tag away from adding the jQuery UI to your project. If you are using an existing MVC project you can still get the jQuery UI library added to your project via NuGet and then add the link and script tags. Assuming that you have pulled down the latest version (at the time of this publish it was 1.8.13) you can add the following link and script tags to your <head> tag: < link href = "@Url.Content(" ~ / Content / themes / base / jquery . ui . all . css ")" rel = "Stylesheet" type = "text/css" /> < script src = "@Url.Content(" ~ / Scripts / jquery-ui-1 . 8 . 13 . min . js ")" type = "text/javascript" ></ script > The jQuery UI library relies upon the CSS scripts and some image files to handle rendering of its widgets (you can choose a different theme or role your own if you like). Adding these to the stock _Layout.cshtml file results in the following markup: <!DOCTYPE html> < html > < head >     < meta charset = "utf-8" />     < title > @ViewBag.Title </ title >     < link href = "@Url.Content(" ~ / Content / Site . css ")" rel = "stylesheet" type = "text/css" />     <link href="@Url.Content("~/Content/themes/base/jquery.ui.all.css")" rel="Stylesheet" type="text/css" />     <script src="@Url.Content("~/Scripts/jquery-1.5.1.min.js")" type="text/javascript"></script>     <script src="@Url.Content("~/Scripts/modernizr-1.7.min . js ")" type = "text/javascript" ></ script >     < script src = "@Url.Content(" ~ / Scripts / jquery-ui-1 . 8 . 13 . min . js ")" type = "text/javascript" ></ script > </ head > < body >     @RenderBody() </ body > </ html > Our example will involve building a list of notes with an id, title and description. Each note can be edited and new notes can be added. The user will never have to leave the single page of notes to manage the note data. The add and edit forms will be delivered in a jQuery UI dialog widget and the note list content will get reloaded via an AJAX call after each change to the list. To begin, we need to craft a model and a data management class. We will do this so we can simulate data storage and get a feel for the workflow of the user experience. The first class named Note will have properties to represent our data model. namespace Website . Models {     public class Note     {         public int Id { get ; set ; }         public string Title { get ; set ; }         public string Body { get ; set ; }     } } The second class named NoteManager will be used to set up our simulated data storage and provide methods for querying and updating the data. We will take a look at the class content as a whole and then walk through each method after. using System . Collections . ObjectModel ; using System . Linq ; using System . Web ; namespace Website . Models {     public class NoteManager     {         public Collection < Note > Notes         {             get             {                 if ( HttpRuntime . Cache [ "Notes" ] == null )                     this . loadInitialData ();                 return ( Collection < Note >) HttpRuntime . Cache [ "Notes" ];             }         }         private void loadInitialData ()         {             var notes = new Collection < Note >();             notes . Add ( new Note                           {                               Id = 1 ,                               Title = "Set DVR for Sunday" ,                               Body = "Don't forget to record Game of Thrones!"                           });             notes . Add ( new Note                           {                               Id = 2 ,                               Title = "Read MVC article" ,                               Body = "Check out the new iwantmymvc.com post"                           });             notes . Add ( new Note                           {                               Id = 3 ,                               Title = "Pick up kid" ,                               Body = "Daughter out of school at 1:30pm on Thursday. Don't forget!"                           });             notes . Add ( new Note                           {                               Id = 4 ,                               Title = "Paint" ,                               Body = "Finish the 2nd coat in the bathroom"                           });             HttpRuntime . Cache [ "Notes" ] = notes ;         }         public Collection < Note > GetAll ()         {             return Notes ;         }         public Note GetById ( int id )         {             return Notes . Where ( i => i . Id == id ). FirstOrDefault ();         }         public int Save ( Note item )         {             if ( item . Id <= 0 )                 return saveAsNew ( item );             var existingNote = Notes . Where ( i => i . Id == item . Id ). FirstOrDefault ();             existingNote . Title = item . Title ;             existingNote . Body = item . Body ;             return existingNote . Id ;         }         private int saveAsNew ( Note item )         {             item . Id = Notes . Count + 1 ;             Notes . Add ( item );             return item . Id ;         }     } } The class has a property named Notes that is read only and handles instantiating a collection of Note objects in the runtime cache if it doesn't exist, and then returns the collection from the cache. This property is there to give us a simulated storage so that we didn't have to add a full blown database (beyond the scope of this post). The private method loadInitialData handles pre-filling the collection of Note objects with some initial data and stuffs them into the cache. Both of these chunks of code would be refactored out with a move to a real means of data storage. The GetAll and GetById methods access our simulated data storage to return all of our notes or a specific note by id. The Save method takes in a Note object, checks to see if it has an Id less than or equal to zero (we assume that an Id that is not greater than zero represents a note that is new) and if so, calls the private method saveAsNew . If the Note item sent in has an Id , the code finds that Note in the simulated storage, updates the Title and Description , and returns the Id value. The saveAsNew method sets the Id , adds it to the simulated storage, and returns the Id value. The increment of the Id is simulated here by getting the current count of the note collection and adding 1 to it. The setting of the Id is the only other chunk of code that would be refactored out when moving to a different data storage approach. With our model and data manager code in place we can turn our attention to the controller and views. We can do all of our work in a single controller. If we use a HomeController , we can add an action method named Index that will return our main view. An action method named List will get all of our Note objects from our manager and return a partial view. We will use some jQuery to make an AJAX call to that action method and update our main view with the partial view content returned. Since the jQuery AJAX call will cache the call to the content in Internet Explorer by default (a setting in jQuery), we will decorate the List, Create and Edit action methods with the OutputCache attribute and a duration of 0. This will send the no-cache flag back in the header of the content to the browser and jQuery will pick that up and not cache the AJAX call. The Create action method instantiates a new Note model object and returns a partial view, specifying the NoteForm.cshtml view file and passing in the model. The NoteForm view is used for the add and edit functionality. The Edit action method takes in the Id of the note to be edited, loads the Note model object based on that Id , and does the same return of the partial view as the Create method. The Save method takes in the posted Note object and sends it to the manager to save. It is decorated with the HttpPost attribute to ensure that it will only be available via a POST. It returns a Json object with a property named Success that can be used by the UX to verify everything went well (we won't use that in our example). Both the add and edit actions in the UX will post to the Save action method, allowing us to reduce the amount of unique jQuery we need to write in our view. The contents of the HomeController.cs file: using System . Web . Mvc ; using Website . Models ; namespace Website . Controllers {     public class HomeController : Controller     {         public ActionResult Index ()         {             return View ();         }         [ OutputCache ( Duration = 0 )]         public ActionResult List ()         {             var manager = new NoteManager ();             var model = manager . GetAll ();             return PartialView ( model );         }         [ OutputCache ( Duration = 0 )]         public ActionResult Create ()         {             var model = new Note ();             return PartialView ( "NoteForm" , model );         }         [ OutputCache ( Duration = 0 )]         public ActionResult Edit ( int id )         {             var manager = new NoteManager ();             var model = manager . GetById ( id );             return PartialView ( "NoteForm" , model );         }         [ HttpPost ]         public JsonResult Save ( Note note )         {             var manager = new NoteManager ();             var noteId = manager . Save ( note );             return Json ( new { Success = noteId > 0 });         }     } } The view for the note form, NoteForm.cshtml , looks like so: @model Website . Models . Note @using ( Html . BeginForm ( "Save" , "Home" , FormMethod . Post , new { id = "NoteForm" })) { @Html . Hidden ( "Id" ) < label class = "Title" >     < span > Title < /span><br / >     @Html . TextBox ( "Title" ) < /label> <label class="Body">     <span>Body</ span >< br />     @Html . TextArea ( "Body" ) < /label> } It is a strongly typed view for our Note model class. We give the <form> element an id attribute so that we can reference it via jQuery. The <label> and <span> tags give our UX some structure that we can style with some CSS. The List.cshtml view is used to render out a <ul> element with all of our notes. @model IEnumerable < Website . Models . Note > < ul class = "NotesList" >     @foreach ( var note in Model )     {     < li >         @note . Title < br />         @note . Body < br />         < span class = "EditLink ButtonLink" noteid = "@note.Id" > Edit < /span>     </ li >     } < /ul> This view is strongly typed as well. It includes a <span> tag that we will use as an edit button. We add a custom attribute named noteid to the <span> tag that we can use in our jQuery to identify the Id of the note object we want to edit. The view, Index.cshtml , contains a bit of html block structure and all of our jQuery logic code. @ {     ViewBag . Title = "Index" ; } < h2 > Notes < /h2> <div id="NoteListBlock"></ div > < span class = "AddLink ButtonLink" > Add New Note < /span> <div id="NoteDialog" title="" class="Hidden"></ div > < script type = "text/javascript" >     $ ( function () {         $ ( "#NoteDialog" ). dialog ({             autoOpen : false , width : 400 , height : 330 , modal : true ,             buttons : {                 "Save" : function () {                     $ . post ( "/Home/Save" ,                         $ ( "#NoteForm" ). serialize (),                         function () {                             $ ( "#NoteDialog" ). dialog ( "close" );                             LoadList ();                         });                 },                 Cancel : function () { $ ( this ). dialog ( "close" ); }             }         });         $ ( ".EditLink" ). live ( "click" , function () {             var id = $ ( this ). attr ( "noteid" );             $ ( "#NoteDialog" ). html ( "" )                 . dialog ( "option" , "title" , "Edit Note" )                 . load ( "/Home/Edit/" + id , function () { $ ( "#NoteDialog" ). dialog ( "open" ); });         });         $ ( ".AddLink" ). click ( function () {             $ ( "#NoteDialog" ). html ( "" )                 . dialog ( "option" , "title" , "Add Note" )                 . load ( "/Home/Create" , function () { $ ( "#NoteDialog" ). dialog ( "open" ); });         });         LoadList ();     });     function LoadList () {         $ ( "#NoteListBlock" ). load ( "/Home/List" );     } < /script> The <div> tag with the id attribute of "NoteListBlock" is used as a container target for the load of the partial view content of our List action method. It starts out empty and will get loaded with content via jQuery once the DOM is loaded. The <div> tag with the id attribute of "NoteDialog" is the element for our dialog widget. The jQuery UI library will use the title attribute for the text in the dialog widget top header bar. We start out with it empty here and will dynamically change the text via jQuery based on the request to either add or edit a note. This <div> tag is given a CSS class named "Hidden" that will set the display:none style on the element. Since our call to the jQuery UI method to make the element a dialog widget will occur in the jQuery document ready code block, the end user will see the <div> element rendered in their browser as the page renders and then it will hide after that jQuery call. Adding the display:hidden to the <div> element via CSS will ensure that it is never rendered until the user triggers the request to open the dialog. The jQuery document load block contains the setup for the dialog node, click event bindings for the edit and add links, and a call to a JavaScript function called LoadList that handles the AJAX call to the List action method. The .dialog() method is called on the "NoteDialog" <div> element and the options are set for the dialog widget. The buttons option defines 2 buttons and their click actions. The first is the "Save" button (the text in quotations is used as the text for the button) that will do an AJAX post to our Save action method and send the serialized form data from the note form (targeted with the id attribute "NoteForm"). Upon completion it will close the dialog widget and call the LoadList to update the UX without a redirect. The "Cancel" button simply closes the dialog widget. The .live() method handles binding a function to the "click" event on all elements with the CSS class named EditLink . We use the .live() method because it will catch and bind our function to elements even as the DOM changes. Since we will be constantly changing the note list as we add and edit we want to ensure that the edit links get wired up with click events. The function for the click event on the edit links gets the noteid attribute and stores it in a local variable. Then it clears out the HTML in the dialog element (to ensure a fresh start), calls the .dialog() method and sets the "title" option (this sets the title attribute value), and then calls the .load() AJAX method to hit our Edit action method and inject the returned content into the "NoteDialog" <div> element. Once the .load() method is complete it opens the dialog widget. The click event binding for the add link is similar to the edit, only we don't need to get the id value and we load the Create action method. This binding is done via the .click() method because it will only be bound on the initial load of the page. The add button will always exist. Finally, we toss in some CSS in the Content/Site.css file to style our form and the add/edit links. . ButtonLink { color : Blue ; cursor : pointer ; } . ButtonLink : hover { text - decoration : underline ; } . Hidden { display : none ; } #NoteForm label { display:block; margin-bottom:6px; } #NoteForm label > span { font-weight:bold; } #NoteForm input[type=text] { width:350px; } #NoteForm textarea { width:350px; height:80px; } With all of our code in place we can do an F5 and see our list of notes: If we click on an edit link we will get the dialog widget with the correct note data loaded: And if we click on the add new note link we will get the dialog widget with the empty form: The end result of our solution tree for our sample:

    Read the article

  • What's new in Solaris 11.1?

    - by Karoly Vegh
    Solaris 11.1 is released. This is the first release update since Solaris 11 11/11, the versioning has been changed from MM/YY style to 11.1 highlighting that this is Solaris 11 Update 1.  Solaris 11 itself has been great. What's new in Solaris 11.1? Allow me to pick some new features from the What's New PDF that can be found in the official Oracle Solaris 11.1 Documentation. The updates are very numerous, I really can't include all.  I. New AI Automated Installer RBAC profiles have been introduced to enable delegation of installation tasks. II. The interactive installer now supports installing the OS to iSCSI targets. III. ASR (Auto Service Request) and OCM (Oracle Configuration Manager) have been enabled by default to proactively provide support information and create service requests to speed up support processes. This is optional and can be disabled but helps a lot in supportcases. For further information, see: http://oracle.com/goto/solarisautoreg IV. The new command svcbundle helps you to create SMF manifests without having to struggle with XML editing. (btw, do you know the interactive editprop subcommand in svccfg? The listprop/setprop subcommands are great for scripting and automating, but for an interactive property editing session try, for example, this: svccfg -s svc:/application/pkg/system-repository:default editprop )  V. pfedit: Ever wondered how to delegate editing permissions to certain files? It is well known "sudo /usr/bin/vi /etc/hosts" is not the right way, for sudo elevates the complete vi process to admin levels, and the user can "break" out of the session as root with simply starting a shell from that vi. Now, the new pfedit command provides a solution exactly to this challenge - an auditable, secure, per-user configurable editing possibility. See the pfedit man page for examples.   VI. rsyslog, the popular logging daemon (filters, SSL, formattable output, SQL collect...) has been included in Solaris 11.1 as an alternative to syslog.  VII: Zones: Solaris Zones - as a major Solaris differentiator - got lots of love in terms of new features: ZOSS - Zones on Shared Storage: Placing your zones to shared storage (FC, iSCSI) has never been this easy - via zonecfg.  parallell updates - with S11's bootenvironments updating zones was no problem and meant no downtime anyway, but still, now you can update them parallelly, a way faster update action if you are running a large number of zones. This is like parallell patching in Solaris 10, but with all the IPS/ZFS/S11 goodness.  per-zone fstype statistics: Running zones on a shared filesystems complicate the I/O debugging, since ZFS collects all the random writes and delivers them sequentially to boost performance. Now, over kstat you can find out which zone's I/O has an impact on the other ones, see the examples in the documentation: http://docs.oracle.com/cd/E26502_01/html/E29024/gmheh.html#scrolltoc Zones got RDSv3 protocol support for InfiniBand, and IPoIB support with Crossbow's anet (automatic vnic creation) feature.  NUMA I/O support for Zones: customers can now determine the NUMA I/O topology of the system from within zones.  VIII: Security got a lot of attention too:  Automated security/audit reporting, with builtin reporting templates e.g. for PCI (payment card industry) audits.  PAM is now configureable on a per-user basis instead of system wide, allowing different authentication requirements for different users  SSH in Solaris 11.1 now supports running in FIPS 140-2 mode, that is, in a U.S. government security accredited fashion.  SHA512/224 and SHA512/256 cryptographic hash functions are implemented in a FIPS-compliant way - and on a T4 implemented in silicon! That is, goverment-approved cryptography at HW-speed.  Generally, Solaris is currently under evaluation to be both FIPS and Common Criteria certified.  IX. Networking, as one of the core strengths of Solaris 11, has been extended with:  Data Center Bridging (DCB) - not only setups where network and storage share the same fabric (FCoE, anyone?) can have Quality-of-Service requirements. DCB enables peers to distinguish traffic based on priorities. Your NICs have to support DCB, see the documentation, and additional information on Wikipedia. DataLink MultiPathing, DLMP, enables link aggregation to span across multiple switches, even between those of different vendors. But there are essential differences to the good old bandwidth-aggregating LACP, see the documentation: http://docs.oracle.com/cd/E26502_01/html/E28993/gmdlu.html#scrolltoc VNIC live migration is now supported from one physical NIC to another on-the-fly  X. Data management:  FedFS, (Federated FileSystem) is new, it relies on Solaris 11's NFS referring mechanism to join separate shares of different NFS servers into a single filesystem namespace. The referring system has been there since S11 11/11, in Solaris 11.1 FedFS uses a LDAP - as the one global nameservice to bind them all.  The iSCSI initiator now uses the T4 CPU's HW-implemented CRC32 algorithm - thus improving iSCSI throughput while reducing CPU utilization on a T4 Storage locking improvements are now RAC aware, speeding up throughput with better locking-communication between nodes up to 20%!  XI: Kernel performance optimizations: The new Virtual Memory subsystem ("VM2") scales now to 100+ TB Memory ranges.  The memory predictor monitors large memory page usage, and adjust memory page sizes to applications' needs OSM, the Optimized Shared Memory allows Oracle DBs' SGA to be resized online XII: The Power Aware Dispatcher in now by default enabled, reducing power consumption of idle CPUs. Also, the LDoms' Power Management policies and the poweradm settings in Solaris 11 OS will cooperate. XIII: x86 boot: upgrade to the (Grand Unified Bootloader) GRUB2. Because grub2 differs in the configuration syntactically from grub1, one shall not edit the new grub configuration (grub.cfg) but use the new bootadm features to update it. GRUB2 adds UEFI support and also support for disks over 2TB. XIV: Improved viewing of per-CPU statistics of mpstat. This one might seem of less importance at first, but nowadays having better sorting/filtering possibilities on a periodically updated mpstat output of 256+ vCPUs can be a blessing. XV: Support for Solaris Cluster 4.1: The What's New document doesn't actually mention this one, since OSC 4.1 has not been released at the time 11.1 was. But since then it is available, and it requires Solaris 11.1. And it's only a "pkg update" away. ...aand I seriously need to stop here. There's a lot I missed, Edge Virtual Bridging, lofi tuning, ZFS sharing and crypto enhancements, USB3.0, pulseaudio, trusted extensions updates, etc - but if I mention all those then I effectively copy the What's New document. Which I recommend reading now anyway, it is a great extract of the 300+ new projects and RFE-followups in S11.1. And this blogpost is a summary of that extract.  For closing words, allow me to come back to Request For Enhancements, RFEs. Any customer can request features. Open up a Support Request, explain that this is an RFE, describe the feature you/your company desires to have in S11 implemented. The more SRs are collected for an RFE, the more chance it's got to get implemented. Feel free to provide feedback about the product, as well as about the Solaris 11.1 Documentation using the "Feedback" button there. Both the Solaris engineers and the documentation writers are eager to hear your input.Feel free to comment about this post too. Except that it's too long ;)  wbr,charlie

    Read the article

  • How to set Grub to automatically load Xen kernel

    - by Cerin
    How do you configure Grub to automatically use the Xen kernel under Ubuntu 11.10? No matter what I do, it loads the first menuentry. The only way I can get it to load Xen is to manually select the kernel, which I can't do if I have to reboot the server remotely, or there's a power failure and the machine automatically boots up when power's restored, etc. It's driving me nuts. In my /boot/grub/grub.cfg, the Xen kernel is at index 4 (i.e. it's the 5th menuentry). So I've tried: Setting GRUB_DEFAULT=4, and running sudo update-grub Setting GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, and running sudo update-grub Setting GRUB_DEFAULT="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server", and running sudo update-grub None of these work. It continues to load the first menuentry, which is "Ubuntu, with Linux 3.0.0-16-server". Below is my current /boot/grub/grub.cfg. What am I doing wrong? # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=2 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu, with Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-16-server ...' linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-16-server } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu, with Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-12-server ...' linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### submenu "Xen 4.1-amd64" { menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • CodePlex Daily Summary for Sunday, August 03, 2014

    CodePlex Daily Summary for Sunday, August 03, 2014Popular ReleasesBoxStarter: Boxstarter 2.4.76: Running the Setup.bat file will install Chocolatey if not present and then install the Boxstarter modules.GMare: GMare Beta 1.2: Features Added: - Instance painting by holding the alt key down while pressing the left mouse button - Functionality to the binary exporter so that backgrounds from image files can be used - On the binary exporter background information can be edited manually now - Update to the GMare binary read GML script - Game Maker Studio export - Import from GMare project. Multiple options to import desired properties of a .gmpx - 10 undo/redo levels instead of 5 is now the default - New preferences dia...Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...SQL Server Dialog: SQL Server Dialog: Input server, user and password Show folder and file in treeview Customize icon Filter file extension Skip system generate folder and fileAitso-a platform for spatial optimization and based on artificial immune systems: Aitso_0.14.08.01: Aitso0.14.08.01Installer.zipVidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.AutoUpdater.NET : Auto update library for VB.NET and C# Developer: AutoUpdater.NET 1.3: Fixed problem in DownloadUpdateDialog where download continues even if you close the dialog. Added support for new url field for 64 bit application setup. AutoUpdater.NET will decide which download url to use by looking at the value of IntPtr.Size. Added German translation provided by Rene Kannegiesser. Now developer can handle update logic herself using event suggested by ricorx7. Added italian translation provided by Gianluca Mariani. Fixed bug that prevents Application from exiti...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.Multiple Threads TCP Server: Project: this Project is based on VS 2013, .net freamwork 4.0, you can open it by vs 2010 or laterAricie Shared: Aricie.Shared Version 1.8.00: Version 1.8.0 - Release Notes New: Expression Builder to design Flee Expressions New: Cryptographic helpers and configuration classes Improvement: Many fixes and improvements with property editor Improvement: Token Replace Property explorer now has a restricted mode for additional security Improvement: Better variables, types and object manipulation Fixed: smart file and flee bugs Fixed: Removed Exception while trying to read unsuported files Improvement: several performance twe...Accesorios de sitios Torrent en Español para Synology Download Station: Pack de Torrents en Español 6.0.0: Agregado los módulos de DivXTotal, el módulo de búsqueda depende del de alojamiento para bajar las series Utiliza el rss: http://www.divxtotal.com/rss.php DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityNew ProjectsCreek: Creek is a Collection of many C# Frameworks and my ownSpeaking Speedometer (android): Simple speaking speedometerT125Protocol { Alpha version }: implement T125 Protocol for communicate with a mainframe.Unix Time: This library provides a System.UnixTime as a new Type providing conversion between Unix Time and .NET DateTime.

    Read the article

  • Combining Shared Secret and Username Token – Azure Service Bus

    - by Michael Stephenson
    As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also flow through a username token so that in your listening WCF service you will be able to identify who sent the message. This could either be in the form of an application or a user depending on how you want to use your token. Prerequisites Before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.UN.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our username token like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the username token bits in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use userNameAuthentication and you can see that I have created my own custom username token validator.   This setup means that WCF will hand off to my class for validating the username token details. I have also added the serviceSecurityAudit element to give me a simple auditing of access capability. My UsernamePassword Validator The below picture shows you the details of the username password validator class I have implemented. WCF will hand off to this class when validating the token and give me a nice way to check the token credentials against an on-premise store. You have all of the validation features with a non-service bus WCF implementation available such as validating the username password against active directory or ASP.net membership features or as in my case above something much simpler.   The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a username token over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the username token with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This is the normal configuration to use a shared secret for accessing a Service Bus endpoint.   Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF service but this time we have also set the ClientCredentials to use the appropriate username and password which will be flown through the service bus and to our service which will validate them.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and username token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.UN.zip

    Read the article

  • MapRedux - PowerShell and Big Data

    - by Dittenhafer Solutions
    MapRedux – #PowerShell and #Big Data Have you been hearing about “big data”, “map reduce” and other large scale computing terms over the past couple of years and been curious to dig into more detail? Have you read some of the Apache Hadoop online documentation and unfortunately concluded that it wasn't feasible to setup a “test” hadoop environment on your machine? More recently, I have read about some of Microsoft’s work to enable Hadoop on the Azure cloud. Being a "Microsoft"-leaning technologist, I am more inclinded to be successful with experimentation when on the Windows platform. Of course, it is not that I am "religious" about one set of technologies other another, but rather more experienced. Anyway, within the past couple of weeks I have been thinking about PowerShell a bit more as the 2012 PowerShell Scripting Games approach and it occured to me that PowerShell's support for Windows Remote Management (WinRM), and some other inherent features of PowerShell might lend themselves particularly well to a simple implementation of the MapReduce framework. I fired up my PowerShell ISE and started writing just to see where it would take me. Quite simply, the ScriptBlock feature combined with the ability of Invoke-Command to create remote jobs on networked servers provides much of the plumbing of a distributed computing environment. There are some limiting factors of course. Microsoft provided some default settings which prevent PowerShell from taking over a network without administrative approval first. But even with just one adjustment, a given Windows-based machine can become a node in a MapReduce-style distributed computing environment. Ok, so enough introduction. Let's talk about the code. First, any machine that will participate as a remote "node" will need WinRM enabled for remote access, as shown below. This is not exactly practical for hundreds of intended nodes, but for one (or five) machines in a test environment it does just fine. C:> winrm quickconfig WinRM is not set up to receive requests on this machine. The following changes must be made: Set the WinRM service type to auto start. Start the WinRM service. Make these changes [y/n]? y Alternatively, you could take the approach described in the Remotely enable PSRemoting post from the TechNet forum and use PowerShell to create remote scheduled tasks that will call Enable-PSRemoting on each intended node. Invoke-MapRedux Moving on, now that you have one or more remote "nodes" enabled, you can consider the actual Map and Reduce algorithms. Consider the following snippet: $MyMrResults = Invoke-MapRedux -MapReduceItem $Mr -ComputerName $MyNodes -DataSet $dataset -Verbose Invoke-MapRedux takes an instance of a MapReduceItem which references the Map and Reduce scriptblocks, an array of computer names which are the remote nodes, and the initial data set to be processed. As simple as that, you can start working with concepts of big data and the MapReduce paradigm. Now, how did we get there? I have published the initial version of my PsMapRedux PowerShell Module on GitHub. The PsMapRedux module provides the Invoke-MapRedux function described above. Feel free to browse the underlying code and even contribute to the project! In a later post, I plan to show some of the inner workings of the module, but for now let's move on to how the Map and Reduce functions are defined. Map Both the Map and Reduce functions need to follow a prescribed prototype. The prototype for a Map function in the MapRedux module is as follows. A simple scriptblock that takes one PsObject parameter and returns a hashtable. It is important to note that the PsObject $dataset parameter is a MapRedux custom object that has a "Data" property which offers an array of data to be processed by the Map function. $aMap = { Param ( [PsObject] $dataset ) # Indicate the job is running on the remote node. Write-Host ($env:computername + "::Map"); # The hashtable to return $list = @{}; # ... Perform the mapping work and prepare the $list hashtable result with your custom PSObject... # ... The $dataset has a single 'Data' property which contains an array of data rows # which is a subset of the originally submitted data set. # Return the hashtable (Key, PSObject) Write-Output $list; } Reduce Likewise, with the Reduce function a simple prototype must be followed which takes a $key and a result $dataset from the MapRedux's partitioning function (which joins the Map results by key). Again, the $dataset is a MapRedux custom object that has a "Data" property as described in the Map section. $aReduce = { Param ( [object] $key, [PSObject] $dataset ) Write-Host ($env:computername + "::Reduce - Count: " + $dataset.Data.Count) # The hashtable to return $redux = @{}; # Return Write-Output $redux; } All Together Now When everything is put together in a short example script, you implement your Map and Reduce functions, query for some starting data, build the MapReduxItem via New-MapReduxItem and call Invoke-MapRedux to get the process started: # Import the MapRedux and SQL Server providers Import-Module "MapRedux" Import-Module “sqlps” -DisableNameChecking # Query the database for a dataset Set-Location SQLSERVER:\sql\dbserver1\default\databases\myDb $query = "SELECT MyKey, Date, Value1 FROM BigData ORDER BY MyKey"; Write-Host "Query: $query" $dataset = Invoke-SqlCmd -query $query # Build the Map function $MyMap = { Param ( [PsObject] $dataset ) Write-Host ($env:computername + "::Map"); $list = @{}; foreach($row in $dataset.Data) { # Write-Host ("Key: " + $row.MyKey.ToString()); if($list.ContainsKey($row.MyKey) -eq $true) { $s = $list.Item($row.MyKey); $s.Sum += $row.Value1; $s.Count++; } else { $s = New-Object PSObject; $s | Add-Member -Type NoteProperty -Name MyKey -Value $row.MyKey; $s | Add-Member -type NoteProperty -Name Sum -Value $row.Value1; $list.Add($row.MyKey, $s); } } Write-Output $list; } $MyReduce = { Param ( [object] $key, [PSObject] $dataset ) Write-Host ($env:computername + "::Reduce - Count: " + $dataset.Data.Count) $redux = @{}; $count = 0; foreach($s in $dataset.Data) { $sum += $s.Sum; $count += 1; } # Reduce $redux.Add($s.MyKey, $sum / $count); # Return Write-Output $redux; } # Create the item data $Mr = New-MapReduxItem "My Test MapReduce Job" $MyMap $MyReduce # Array of processing nodes... $MyNodes = ("node1", "node2", "node3", "node4", "localhost") # Run the Map Reduce routine... $MyMrResults = Invoke-MapRedux -MapReduceItem $Mr -ComputerName $MyNodes -DataSet $dataset -Verbose # Show the results Set-Location C:\ $MyMrResults | Out-GridView Conclusion I hope you have seen through this article that PowerShell has a significant infrastructure available for distributed computing. While it does take some code to expose a MapReduce-style framework, much of the work is already done and PowerShell could prove to be the the easiest platform to develop and run big data jobs in your corporate data center, potentially in the Azure cloud, or certainly as an academic excerise at home or school. Follow me on Twitter to stay up to date on the continuing progress of my Powershell MapRedux module, and thanks for reading! Daniel

    Read the article

  • Why people don't patch and upgrade?!?

    - by Mike Dietrich
    Discussing the topic "Why Upgrade" or "Why not Upgrade" is not always fun. Actually the arguments repeat from customer to customer. Typically we hear things such as: A PSU or Patch Set introduces new bugs A new PSU or Patch Set introduces new features which lead to risk and require application verification  Patching means risk Patching changes the execution plans Patching requires too much testing Patching is too much work for our DBAs Patching costs a lot of money and doesn't pay out And to be very honest sometimes it's hard for me to stay calm in such discussions. Let's discuss some of these points a bit more in detail. A PSU or Patch Set introduces new bugsWell, yes, that is true as no software containing more than some lines of code is bug free. This applies to Oracle's code as well as too any application or operating system code. But first of all, does that mean you never patch your OS because the patch may introduce new flaws? And second, what is the point of saying "it introduces new bugs"? Does that mean you will never get rid of the mean issues we know about and we fixed already? Scroll down from MOS Note:161818.1 to the patch release you are on, no matter if it's 10.2.0.4 or 11.2.0.3 and check for the Known Issues And Alerts.Will you take responsibility to know about all these issues and refuse to upgrade to 11.2.0.4? I won't. A new PSU or Patch Set introduces new featuresOk, we can discuss that. Offering new functionality within a database patch set is a dubious thing. It has advantages such as in 11.2.0.4 where we backported Database Redaction to. But this is something you will only use once you have an Advanced Security license. I interpret that statement I've heard quite often from customers in a different way: People don't want to get surprises such as new behaviour. This certainly gives everybody a hard time. And we've had many examples in the past (SESSION_CACHED_CURSROS in 10.2.0.4,  _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE in 11.2.0.2 and others) where those things weren't documented, not even in the README. Thanks to many friends out there I learned about those as well. So new behaviour is the topic people consider as risky - not really new features. And just to point this out: A PSU never brings in new features or new behaviour by definition! Patching means riskDoes it really mean risk? Yes, there were issues in the past (and sometimes in the present as well) where a patch didn't get installed correctly. But personally I consider it way more risky to not patch. Keep that in mind: The day Oracle publishes an PSU (or CPU) containing security fixes all the great security experts out there go public with their findings as well. So from that day on even my grandma can find out about those issues and try to attack somebody. Now a lot of people say: "My database does not face the internet." And I will answer: "The enemy is sitting already behind your firewalls. And knows potentially about these things." My statement: Not patching introduces way more risk to your environment than patching. Seriously! Patching changes the execution plansDo they really? I agree - there's a very small risk for this happening with Patch Sets. But not with PSUs or CPUs as they contain no optimizer fixes changing behaviour (but they may contain fixes curing wrong-query-result-bugs). But what's the point of a changing execution plan? In Oracle Database 11g it is so simple to be prepared. SQL Plan Management is a free EE feature - so once that occurs you'll put the plan into the Plan Baseline. Basta! Yes, you wouldn't like to get such surprises? Than please use the SQL Performance Analyzer (SPA) from Real Application Testing and you'll detect that easily upfront in minutes. And not to forget this, a plan change can also be very positive!Yes, there's a little risk with a database patchset - and we have many possibilites to detect this before patching. Patching requires too much testingWell, does it really? I have seen in the past 12 years how people test. There are very different efforts and approaches on this. I have seen people spending a hell of money on licenses or on project team staffing. And I have seen people sailing blindly without any tests just going the John-Wayne-approach.Proper tools will allow you to test easily without too much efforts. See the paragraph above. We have used Real Application Testing in so many customer projects reducing the amount of work spend on testing by over 50%. But apart from that at some point you will have to stop testing. If you don't you'll get lost and you'll burn money. There's no 100% guaranty. You will have to deal with a little risk as reaching the final 5% of certainty will cost you the same as it did cost to reach 95%. And doing this will lead to abnormal long product cycles that you'll run behind forever. And this will cost even more money. Patching is too much work for our DBAsPatching is a lot of work. I agree. And it's no fun work. It's boring, annoying. You don't learn much from that. That's why you should try to automate this task. Use the Database's Lifecycle Management Pack. And don't cry about the fact that it costs money. Yes it does. But it will ease the process and you'll save a lot of costs as you don't waste your valuable time with patching. Or use Oracle Database 12c Oracle Multitenant and patch either by unplug/plug or patch an entire container database with all PDBs with one patch in one task. We have customer reference cases proofing it saved them 75% of time, effort and cost since they've used Lifecycle Management Pack. So why don't you use it? Patching costs a lot of money and doesn't pay outWell, see my statements in the paragraph above. And it pays out as flying with a database with 100 known critical flaws in it which are already fixed by Oracle (such as in the Oct 2013 PSU for Oracle Database 12c) will cost ways more in case of failure or even data loss. Bet with me? Let me finally ask you some questions. What cell phone are you using and which OS does it run? Do you have an iPhone 5 and did you upgrade already to iOS 7.0.3? I've just encountered on mine that the alarm (which I rely on when traveling) has gotten now a dependency on the physical switch "sound on/off". If it is switched to "off" physically the alarm rings "silently". What a wonderful example of a behaviour change coming in with a patch set. Will this push you to stay with iOS5 or iOS6? No, because those have security flaws which won't be fixed anymore. What browser are you surfing with? Do you use Mozilla 3.6? Well, congratulations to all the hackers. It will be easy for them to attack you and harm your system. I'd guess you have the auto updater on.  Same for Google Chrome, Safari, IE. Right? -Mike The T.htmtableborders, .htmtableborders td, .htmtableborders th {border : 1px dashed lightgrey ! important;} html, body { border: 0px; } body { background-color: #ffffff; } img, hr { cursor: default }

    Read the article

  • Attaching a Command to the WP7 Application Bar.

    - by mbcrump
    One of the biggest problems that I’ve seen with people creating WP7 applications is how do you bind the application bar to a Relay Command. If your using MVVM then this is particular important. Let’s examine the code that one might add to start with.  <phone:PhoneApplicationPage.ApplicationBar> <shell:ApplicationBar IsVisible="True" IsMenuEnabled="True"> <shell:ApplicationBarIconButton x:Name="appbar_button1" IconUri="/icons/appbar.questionmark.rest.png" Text="About"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <GalaSoft_MvvmLight_Command:EventToCommand Command="{Binding DisplayAbout, Mode=OneWay}" /> </i:EventTrigger> </i:Interaction.Triggers> </shell:ApplicationBarIconButton> <shell:ApplicationBar.MenuItems> <shell:ApplicationBarMenuItem x:Name="menuItem1" Text="MenuItem 1"></shell:ApplicationBarMenuItem> <shell:ApplicationBarMenuItem x:Name="menuItem2" Text="MenuItem 2"></shell:ApplicationBarMenuItem> </shell:ApplicationBar.MenuItems> </shell:ApplicationBar> </phone:PhoneApplicationPage.ApplicationBar> Everything looks right. But we quickly notice that we have a squiggly line under our Interaction.Triggers. The problem is that the object is not a FrameworkObject. This same code would have worked perfect if this were a normal button. OK. Point has been proved. Let’s make the ApplicationBar support Commands. So, go ahead and create a new project using MVVM Light. If you want to check out the source and work along side this tutorial then click here.  7 Easy Steps to have binding on the Application Bar using MVVM Light (I might add that you don’t have to use MVVM Light to get this functionality, I just prefer it.) 1) Download MVVM Light if you don’t already have it and install the project templates. It is available at http://mvvmlight.codeplex.com/. 2) Click File-New Project and navigate to Silverlight for Windows Phone. Make sure you use the MVVM Light (WP7) Template. 3) Now that we have our project setup and ready to go let’s download a wrapper created by Nicolas Humann here, it is called Phone7.Fx. After you download it then extract it somewhere that you can find it. This wrapper will make our application bar/menu item bindable. 4) Right click References inside your WP7 project and add the .dll file to your project. 5) In your MainPage.xaml you will need to add the proper namespace to it. Don’t forget to build your project afterwards. xmlns:Preview="clr-namespace:Phone7.Fx.Preview;assembly=Phone7.Fx.Preview" 6) Now you can add the BindableAppBar to your MainPage.xaml with a few lines of code.  <Preview:BindableApplicationBar x:Name="AppBar" BarOpacity="1.0" > <Preview:BindableApplicationBarIconButton Command="{Binding DisplayAbout}" IconUri="/icons/appbar.questionmark.rest.png" Text="About" /> <Preview:BindableApplicationBar.MenuItems> <Preview:BindableApplicationBarMenuItem Text="Settings" Command="{Binding InputBox}" /> </Preview:BindableApplicationBar.MenuItems> </Preview:BindableApplicationBar> So your final MainPage.xaml will look similar to this: NOTE: The AppBar will be located inside of the Grid using this wrapper.   <!--LayoutRoot contains the root grid where all other page content is placed--> <Grid x:Name="LayoutRoot" Background="Transparent"> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <!--TitlePanel contains the name of the application and page title--> <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="24,24,0,12"> <TextBlock x:Name="ApplicationTitle" Text="{Binding ApplicationTitle}" Style="{StaticResource PhoneTextNormalStyle}" /> <TextBlock x:Name="PageTitle" Text="{Binding PageName}" Margin="-3,-8,0,0" Style="{StaticResource PhoneTextTitle1Style}" /> </StackPanel> <!--ContentPanel - place additional content here--> <Grid x:Name="ContentGrid" Grid.Row="1"> <TextBlock Text="{Binding Welcome}" Style="{StaticResource PhoneTextNormalStyle}" HorizontalAlignment="Center" VerticalAlignment="Center" FontSize="40" /> </Grid> <Preview:BindableApplicationBar x:Name="AppBar" BarOpacity="1.0" > <Preview:BindableApplicationBarIconButton Command="{Binding DisplayAbout}" IconUri="/icons/appbar.questionmark.rest.png" Text="About" /> <Preview:BindableApplicationBar.MenuItems> <Preview:BindableApplicationBarMenuItem Text="Settings" Command="{Binding InputBox}" /> </Preview:BindableApplicationBar.MenuItems> </Preview:BindableApplicationBar> </Grid> 7) Let’s go ahead and create the RelayCommands and write them up to a MessageBox by editing our MainViewModel.cs file. public class MainViewModel : ViewModelBase { public string ApplicationTitle { get { return "MVVM LIGHT"; } } public string PageName { get { return "My page:"; } } public string Welcome { get { return "Welcome to MVVM Light"; } } public RelayCommand DisplayAbout { get; private set; } public RelayCommand InputBox { get; private set; } /// <summary> /// Initializes a new instance of the MainViewModel class. /// </summary> public MainViewModel() { if (IsInDesignMode) { // Code runs in Blend --> create design time data. } else { DisplayAbout = new RelayCommand(() => { MessageBox.Show("About box called!"); }); InputBox = new RelayCommand(() => { MessageBox.Show("settings button called"); }); } } If you run the project now you should get something similar to this (notice the AppBar at the bottom):  Now if you hit the question mark then you will get the following MessageBox: The MenuItem works as well so for Settings: As you can see, its pretty easy to add a Command to the ApplicationBar/MenuItem. If you want to look through the full source code then click here.   Subscribe to my feed

    Read the article

  • Nginx Subdomain Problem

    - by user292299
    i can't access my subdomain on localhost. my localdomain is localhost.dev and it's work.but i want to auto subdomain for php script (username.localhost.dev) i try this server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev ***.localhost.dev**; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } it's not working.i change server_name for testing server_name localhost.dev asd.localhost.dev; i can't access asd.localhost.dev and i try this double server{} section # You may add here your # server { # ... # } # statements for each of your virtual hosts to this file ## # You should look at the following URL's in order to grasp a solid understanding # of Nginx configuration files in order to fully unleash the power of Nginx. # http://wiki.nginx.org/Pitfalls # http://wiki.nginx.org/QuickStart # http://wiki.nginx.org/Configuration # # Generally, you will want to move this file somewhere, and start with a clean # file but keep this around for reference. Or just disable in sites-enabled. # # Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples. ## server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } ############################### server { access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name asd.localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # root html; # index index.html index.htm; # # location / { # try_files $uri $uri/ =404; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # # root html; # index index.html index.htm; # # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # # ssl_session_timeout 5m; # # ssl_protocols SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; # ssl_prefer_server_ciphers on; # # location / { # try_files $uri $uri/ =404; # } #} i can't success

    Read the article

  • Secure Your Wireless Router: 8 Things You Can Do Right Now

    - by Chris Hoffman
    A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

    Read the article

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • Automatic Maintenance Jobs in every PDB? New SPM Evolve Advisor Task in Oracle 12.1.0.2

    - by Mike Dietrich
    A customer checking out our slides from the OTN Tour in August 2014 asked me a finicky question the other day: "According to the documentation the Automatic SQL Tuning Advisor maintenance task gets executed only within the CDB$ROOT, but not within each PDB - but the slides are not clear here. So what is the truth?" Ok, that's good question. In my understanding all tasks will get executed within each PDB - that's why we recommend (based on experience) to break up the default maintenance windows when using Oracle Multitenant. Otherwise all PDBs will have the same maintenance windows, and guess what will happen when 25 PDBs start gathering object statistics at the same time ... The documentation indeed says: Automatic SQL Tuning Advisor data is stored in the root. It might have results about SQL statements executed in a PDB that were analyzed by the advisor, but these results are not included if the PDB is unplugged. A common user whose current container is the root can run SQL Tuning Advisor manually for SQL statements from any PDB. When a statement is tuned, it is tuned in any container that runs the statement. This sounds reasonable. But when we have a look into our PDBs or into the CDB_AUTOTASK_CLIENT view the result is different from what the doc says. In my environment I did create just two fresh empty PDBs (CON_ID 3 and 4): SQL> select client_name, status, con_id from cdb_autotask_client; CLIENT_NAME                           STATUS         CON_ID------------------------------------- ---------- ----------auto optimizer stats collection       ENABLED             1sql tuning advisor                    ENABLED             1auto space advisor                    ENABLED             1auto optimizer stats collection       ENABLED             4sql tuning advisor                    ENABLED             4auto space advisor                    ENABLED             4auto optimizer stats collection       ENABLED             3sql tuning advisor                    ENABLED             3auto space advisor                    ENABLED             3 9 rows selected. I haven't verified the reason why this is different from the docs but it may have been related to one change in Oracle Database 12.1.0.2: The new SPM Evolve Advisor Task ( SYS_AUTO_SPM_EVOLVE_TASK) for automatic plan evolution for SQL Plan Management. This new task doesn't appear as a stand-alone job (client) in the maintenance window but runs as a sub-entity of the Automatic SQL Tuning Advisor task. And (I'm just guessing) this may be one of the reasons why every PDB will have to have its own Automatic SQL Tuning Advisor task  Here you'll find more information about how to enable, disable and configure the new Oracle 12.1.0.2 SPM Evolve Advisor Task: Oracle Database 12.1.0.2 SQL Tuning Guide:Managing the SPM Evolve Advisor Task -Mike

    Read the article

  • Combining Shared Secret and Certificates

    - by Michael Stephenson
    As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also combine this with certificates so that you can identify the sender of the message.   Prerequisites As in the previous article before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   Setting up the Certificates To keep the post and sample simple I am going to use the local computer store for all certificates but this bit is really just the same as setting up certificates for an example where you are using WCF without using Windows Azure Service Bus. In the sample I have included two batch files which you can use to create the sample certificates or remove them. Basically you will end up with: A certificate called PocServerCert in the personal store for the local computer which will be used by the WCF Service component A certificate called PocClientCert in the personal store for the local computer which will be used by the client application A root certificate in the Root store called PocRootCA with its associated revocation list which is the root from which the client and server certificates were created   For the sample Im just using development certificates like you would normally, and you can see exactly how these are configured and placed in the stores from the batch files in the solution using makecert and certmgr.   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.Cert.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our certificate like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element.     Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the certificate stuff in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use the clientCertificate check and also specifying the serviceCertificate with information on how to find the servers certificate in the store.     I have also added a serviceAuthorization section where I will implement my own authorization component to perform additional security checks after the service has validated that the message was signed with a good certificate. I also have the same serviceSecurityAudit configuration to log access to my service. My Authorization Manager The below picture shows you implementation of my authorization manager. WCF will eventually hand off the message to my authorization component before it calls the service code. This is where I can perform some logic to check if the identity is allowed to access resources. In this case I am simple rejecting messages from anyone except the PocClientCertificate.     The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a certificate over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding.   Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the token from a certificate with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This contains the normal transportClientEndpointBehaviour to setup the ACS shared secret configuration but we have also configured the clientCertificate to look for the PocClientCert.     Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF in exactly the normal way but the configuration will jump in and ensure that a token is passed representing the client certificate.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and certificate based token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.Cert.zip

    Read the article

  • ATI propriatery drivers install latest 12.8, broke my kernel. Stuck on kernel 3.2.0-26

    - by user66987
    I messed up a bit. Hoping some here can help me. I tried to install the newest catalyst 12.8. Sadly, this broke my system. I was stuck in low graphics mode. I finally managed to restore the proprietary drivers, and get into ubuntu again. But now I am stuck on kernel 3.2.0.26. I had installed kernel 3.2.0-30, but the system no longer sees it. I have kernel 3.2.0-29 too, but the system cannot see that as well. In the grub menu. When I use sudo update-grub, they are both listed. Here are the output I get: Searching for GRUB installation directory ... found: /boot/grub Cannot determine root device. Assuming /dev/hda1 This error is probably caused by an invalid /etc/fstab Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-3.2.0-30-generic Found kernel: /boot/vmlinuz-3.2.0-29-generic Found kernel: /boot/vmlinuz-3.2.0-27-generic Found kernel: /boot/vmlinuz-3.2.0-26-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done I have searched everywhere to find a solution to my problem, but can't find any solutions. If you need any log outputs to figure out the problem, please let me know which ones. Update: here is the output for grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b set locale_dir=($root)/boot/grub/locale set lang=nb_NO insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, med Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-26-generic } menuentry 'Ubuntu, med Linux 3.2.0-26-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-26-generic ...' linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-26-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, med Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-25-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-25-generic ...' linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-23-generic ...' linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 448AF3CE8AF3BA8E chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I set kernel 3.2.0.30 as the default kernel? According to this file, kernel 3.2.0-30 does not exist.

    Read the article

  • A* PathFinding Poor Performance

    - by RedShft
    After debugging for a few hours, the algorithm seems to be working. Right now to check if it works i'm checking the end node position to the currentNode position when the while loop quits. So far the values look correct. The problem is, the farther I get from the NPC, who is current stationary, the worse the performance gets. It gets to a point where the game is unplayable less than 10 fps. My current PathGraph is 2500 nodes, which I believe is pretty small, right? Any ideas on how to improve performance? struct Node { bool walkable; //Whether this node is blocked or open vect2 position; //The tile's position on the map in pixels int xIndex, yIndex; //The index values of the tile in the array Node*[4] connections; //An array of pointers to nodes this current node connects to Node* parent; int gScore; int hScore; int fScore; } class AStar { private: SList!Node openList; SList!Node closedList; //Node*[4] connections; //The connections of the current node; Node currentNode; //The current node being processed Node[] Path; //The path found; const int connectionCost = 10; Node start, end; ////////////////////////////////////////////////////////// void AddToList(ref SList!Node list, ref Node node ) { list.insert( node ); } void RemoveFrom(ref SList!Node list, ref Node node ) { foreach( elem; list ) { if( node.xIndex == elem.xIndex && node.yIndex == elem.yIndex ) { auto a = find( list[] , elem ); list.linearRemove( take(a, 1 ) ); } } } bool IsInList( SList!Node list, ref Node node ) { foreach( elem; list ) { if( node.xIndex == elem.xIndex && node.yIndex == elem.yIndex ) return true; } return false; } void ClearList( SList!Node list ) { list.clear; } void SetParentNode( ref Node parent, ref Node child ) { child.parent = &parent; } void SetStartAndEndNode( vect2 vStart, vect2 vEnd, Node[] PathGraph ) { int startXIndex, startYIndex; int endXIndex, endYIndex; startXIndex = cast(int)( vStart.x / 32 ); startYIndex = cast(int)( vStart.y / 32 ); endXIndex = cast(int)( vEnd.x / 32 ); endYIndex = cast(int)( vEnd.y / 32 ); foreach( node; PathGraph ) { if( node.xIndex == startXIndex && node.yIndex == startYIndex ) { start = node; } if( node.xIndex == endXIndex && node.yIndex == endYIndex ) { end = node; } } } void SetStartScores( ref Node start ) { start.gScore = 0; start.hScore = CalculateHScore( start, end ); start.fScore = CalculateFScore( start ); } Node GetLowestFScore() { Node lowest; lowest.fScore = 10000; foreach( elem; openList ) { if( elem.fScore < lowest.fScore ) lowest = elem; } return lowest; } //This function current sets the program into an infinite loop //I still need to debug to figure out why the parent nodes aren't correct void GeneratePath() { while( currentNode.position != start.position ) { Path ~= currentNode; currentNode = *currentNode.parent; } } void ReversePath() { Node[] temp; for(int i = Path.length - 1; i >= 0; i-- ) { temp ~= Path[i]; } Path = temp.dup; } public: //@FIXME It seems to find the path, but now performance is terrible void FindPath( vect2 vStart, vect2 vEnd, Node[] PathGraph ) { openList.clear; closedList.clear; SetStartAndEndNode( vStart, vEnd, PathGraph ); SetStartScores( start ); AddToList( openList, start ); while( currentNode.position != end.position ) { currentNode = GetLowestFScore(); if( currentNode.position == end.position ) break; else { RemoveFrom( openList, currentNode ); AddToList( closedList, currentNode ); for( int i = 0; i < currentNode.connections.length; i++ ) { if( currentNode.connections[i] is null ) continue; else { if( IsInList( closedList, *currentNode.connections[i] ) && currentNode.gScore < currentNode.connections[i].gScore ) { currentNode.connections[i].gScore = currentNode.gScore + connectionCost; currentNode.connections[i].hScore = abs( currentNode.connections[i].xIndex - end.xIndex ) + abs( currentNode.connections[i].yIndex - end.yIndex ); currentNode.connections[i].fScore = currentNode.connections[i].gScore + currentNode.connections[i].hScore; currentNode.connections[i].parent = &currentNode; } else if( IsInList( openList, *currentNode.connections[i] ) && currentNode.gScore < currentNode.connections[i].gScore ) { currentNode.connections[i].gScore = currentNode.gScore + connectionCost; currentNode.connections[i].hScore = abs( currentNode.connections[i].xIndex - end.xIndex ) + abs( currentNode.connections[i].yIndex - end.yIndex ); currentNode.connections[i].fScore = currentNode.connections[i].gScore + currentNode.connections[i].hScore; currentNode.connections[i].parent = &currentNode; } else { currentNode.connections[i].gScore = currentNode.gScore + connectionCost; currentNode.connections[i].hScore = abs( currentNode.connections[i].xIndex - end.xIndex ) + abs( currentNode.connections[i].yIndex - end.yIndex ); currentNode.connections[i].fScore = currentNode.connections[i].gScore + currentNode.connections[i].hScore; currentNode.connections[i].parent = &currentNode; AddToList( openList, *currentNode.connections[i] ); } } } } } writeln( "Current Node Position: ", currentNode.position ); writeln( "End Node Position: ", end.position ); if( currentNode.position == end.position ) { writeln( "Current Node Parent: ", currentNode.parent ); //GeneratePath(); //ReversePath(); } } Node[] GetPath() { return Path; } } This is my first attempt at A* so any help would be greatly appreciated.

    Read the article

  • Right div pushing center div further down

    - by Chase
    I cannot get this last div to go up properly in my layout and have tried countless things. I'm not sure what's going on with my css? Here is a screenshot: http://img291.imageshack.us/img291/5377/screenshot20100528at123.png #events { float: left; width: 420px; margin:0 0 5px 0; font-family:Helvetica, Arial, sans-serif; font-size: 16px; background-image: url(images/lastfmhead.jpg); background-repeat: no-repeat; height:360px; overflow:hidden; display: inline; } #events table { width:419px; } #events th, td { padding: 3px 3px; } #whatsup ul, #citywhatsup ul { margin:0 5px 0 5px; text-align:left; font-family:Helvetica, Arial, sans-serif; } #whatsup ul li, #citywhatsup ul li{ list-style-type:none; list-style: none; } #whatsup hr, #citywhatsup hr{ border: none 0; border-top: 1px dashed #990000;/*the border*/ width: 100%; height: 1px; margin: 1px auto 5px auto;/*whatever the total width of the border-top and border-bottom equal*/ } #events ul { margin:5px 5px 0 5px; } #events ul li{ list-style-type:none; list-style: none; } #attending ul { display: inline-block; margin: 0; width:200px; } #attending ul li { display: inline-block; list-style-image:none; margin:0; padding:2px 5px 2px 5px; } #attending { width: 230px; margin:0 13px 5px 12px; float: left; display: inline; background-image: url(images/otherhead.jpg); background-repeat: no-repeat; text-align:center; height:360px; overflow:hidden; } #whatsup { width: 230px; margin:0 0 5px 0; float: left; display:inline; background-image: url(images/otherhead.jpg); background-repeat: no-repeat; text-align:center; } #eventtitle{ margin: 3px 0 -3px 0; } #eventtitle { color: #900; margin-left: 5px; font-size:16px; } #tweetit { color: #487B96 !important; font-size:16px; margin: 3px 0 -4px 0; } #photos { background-image: url(images/flickrheader.jpg); background-repeat: no-repeat; width: 665px; clear:both; } <div id="cityevents"> <h2> Events </h2> <table> <th>Date </th><th> Who's Playing </th><th> Venue </th><th> City </th><th> Tickets </th> <tr><td>May 28</td><td><a href='http://www.songkick.com/concerts/5384486?utm_source=1121&utm_medium=partner' target='_blank'>Jill King</a></td><td>Open Eye Cafe</td><td>Carrboro</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 28</td><td><a href='http://www.songkick.com/concerts/5281141?utm_source=1121&utm_medium=partner' target='_blank'>Ahleuchatistas</a></td><td>Nightlight</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 28</td><td><a href='http://www.songkick.com/concerts/4970896?utm_source=1121&utm_medium=partner' target='_blank'>Sam Quinn</a></td><td>Local 506</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/5303661?utm_source=1121&utm_medium=partner' target='_blank'>Cagematch Mayhem, Champion Vs Au Jus, Heartbreaker Vs Au Jus</a></td><td>DSI Comedy Theater</td><td>Carrboro</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/5303661/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/4722066?utm_source=1121&utm_medium=partner' target='_blank'>Lewd Acts, Converge, Gaza, Black Breath</a></td><td>Cat's Cradle</td><td>Carrboro</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/4722066/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/4647076?utm_source=1121&utm_medium=partner' target='_blank'>Nate Currin</a></td><td>Broad Street Cafe</td><td>Durham</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/5580211?utm_source=1121&utm_medium=partner' target='_blank'>International Night</a></td><td>Serena Rtp</td><td>Durham</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/5580211/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/4770241?utm_source=1121&utm_medium=partner' target='_blank'>Jill King</a></td><td>Caffe Driade</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/5406411?utm_source=1121&utm_medium=partner' target='_blank'>Sunbears!</a></td><td>Local 506</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 29</td><td><a href='http://www.songkick.com/concerts/4924136?utm_source=1121&utm_medium=partner' target='_blank'>Studio Gangsters</a></td><td>The Reservoir</td><td>Carrboro</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 30</td><td><a href='http://www.songkick.com/concerts/5252161?utm_source=1121&utm_medium=partner' target='_blank'>She Wants Revenge</a></td><td>Cat's Cradle</td><td>Carrboro</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>May 30</td><td><a href='http://www.songkick.com/concerts/4436326?utm_source=1121&utm_medium=partner' target='_blank'>Unheard Radio Battle of the Bands</a></td><td>Mansion 462</td><td>Chapel Hill</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/4436326/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>May 30</td><td><a href='http://www.songkick.com/concerts/4924141?utm_source=1121&utm_medium=partner' target='_blank'>Studio Gangsters</a></td><td>The Cave</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>Jun 2</td><td><a href='http://www.songkick.com/concerts/5252881?utm_source=1121&utm_medium=partner' target='_blank'>Jeanne Jolly</a></td><td>Caffe Driade</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>Jun 2</td><td><a href='http://www.songkick.com/concerts/4628026?utm_source=1121&utm_medium=partner' target='_blank'>James Husband, Of Montreal</a></td><td>Cat's Cradle</td><td>Carrboro</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/4628026/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>Jun 2</td><td><a href='http://www.songkick.com/concerts/5019466?utm_source=1121&utm_medium=partner' target='_blank'>Camera Obscura</a></td><td>Duke Gardens</td><td>Durham</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/5019466/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>Jun 3</td><td><a href='http://www.songkick.com/concerts/4226511?utm_source=1121&utm_medium=partner' target='_blank'>Reverend Horton Heat, Cracker, Legendary Shack Shakers</a></td><td>Cat's Cradle</td><td>Carrboro</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/4226511/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>Jun 3</td><td><a href='http://www.songkick.com/concerts/5253371?utm_source=1121&utm_medium=partner' target='_blank'>American Aquarium</a></td><td>Local 506</td><td>Chapel Hill</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>Jun 4</td><td><a href='http://www.songkick.com/concerts/4285251?utm_source=1121&utm_medium=partner' target='_blank'>Laurence Juber</a></td><td>The ArtsCenter</td><td>Carrboro</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr><tr><td>Jun 4</td><td><a href='http://www.songkick.com/concerts/5642566?utm_source=1121&utm_medium=partner' target='_blank'>Community Jam, Pt Scarborough Is a Movie, Armageddon'it</a></td><td>DSI Comedy Theater</td><td>Carrboro</td><td style='text-align:center;'><a href='http://www.songkick.com/concerts/5642566/tickets?utm_source=1121&utm_medium=partner' target='_blank'> Find </a></td></tr><tr><td>Jun 4</td><td><a href='http://www.songkick.com/concerts/4676216?utm_source=1121&utm_medium=partner' target='_blank'>Big Bill Morganfield</a></td><td>Papa Mojos Roadhouse</td><td>Durham</td><td style='text-align:center;'><span style='color: #999'> Find </span></td></tr> </table> </div> <!-- Events --> <div id="citywhatsup"> <h2> What's Up? <div id="tweetit"><a class="btn-slide">Tell em'</a> </div></h2> <div id="twitpanel"></div> <script type="text/javascript"> twttr.anywhere(function (T) { T("#twitpanel").tweetBox({ height: 100, width: 215, label: '', defaultContent: "" }); }); </script> <script type="text/javascript"> twttr.anywhere(function (T) { T("#whatsup").linkifyUsers(); }); </script> <ul> <li><img src='http://a1.twimg.com/profile_images/898693876/4604414396_0464180430_b_normal.jpg' alt='kaiten_keiku' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @kaiten_keiku: <span style='text-align:justify;'>@Charlotte_Nao ????????~?????????!</span> - <span class='twittertime'>May 28 12:37AM</span></li><hr/><li><img src='http://a3.twimg.com/profile_images/612153581/bowdown_normal.jpg' alt='bugn' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @bugn: <span style='text-align:justify;'>@Bravotv (sitc2 as rhony) Bethenny-Carrie, Sonja-Samantha, Alex-Miranda, Ramona-Charlotte</span> - <span class='twittertime'>May 28 12:36AM</span></li><hr/><li><img src='http://a1.twimg.com/profile_images/844630278/mj_normal.jpg' alt='Myra_Jones' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @Myra_Jones: <span style='text-align:justify;'>@t_weet123 If you're still in Charlotte then you need to head to Whiskey River...they say Luke B. just walked in and started drinking.</span> - <span class='twittertime'>May 28 12:36AM</span></li><hr/><li><img src='http://a1.twimg.com/profile_images/936667468/110971230_normal.jpg' alt='THEORACLE2' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @THEORACLE2: <span style='text-align:justify;'>@MsKamilah08 are yall in charlotte?</span> - <span class='twittertime'>May 28 12:36AM</span></li><hr/><li><img src='http://a1.twimg.com/profile_images/767244842/7AM_normal.jpg' alt='mtollefsrud' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @mtollefsrud: <span style='text-align:justify;'>@vosler09 thinks I'm Charlotte.</span> - <span class='twittertime'>May 28 12:36AM</span></li><hr/><li><img src='http://a3.twimg.com/profile_images/936496517/DSCF0317_-_Copy_normal.JPG' alt='Thasian' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @Thasian: <span style='text-align:justify;'>I like #CharMeck #Charlotte | Atlanta = #No #FAIL #EPICFAIL</span> - <span class='twittertime'>May 28 12:36AM</span></li><hr/><li><img src='http://a3.twimg.com/profile_images/695551715/NASCAR_logo_flag_normal.jpg' alt='NascarNewsNow' height=40px; width=40px; style='border:0px; float: left; padding-right:4px;'/> @NascarNewsNow: <span style='text-align:justify;'>#NASCAR #RACING News from the track: Charlotte Motor Speedway | Nascar Leath: Ahh, the waiting is... http://bit.ly/b2DToq #NHRA #DAYTONA500</span> - <span class='twittertime'>May 28 12:35AM</span></li> </ul> </div> <div id="photos"> <h2> Recent Photos </h2> <ul> <li><a href='http://farm5.static.flickr.com/4029/4646832962_980f936db9.jpg' target='_blank' rel='lightbox-photos' title='05 23 10 Jamie's Baby Shower 097'><img src='http://farm5.static.flickr.com/4029/4646832962_980f936db9_t.jpg' alt='05 23 10 Jamie's Baby Shower 097' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm4.static.flickr.com/3176/4646218481_d06829a778.jpg' target='_blank' rel='lightbox-photos' title='summer'><img src='http://farm4.static.flickr.com/3176/4646218481_d06829a778_t.jpg' alt='summer' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4032/4646833312_7b1de5390a.jpg' target='_blank' rel='lightbox-photos' title='100_0064'><img src='http://farm5.static.flickr.com/4032/4646833312_7b1de5390a_t.jpg' alt='100_0064' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4008/4646832834_784a0a9ed1.jpg' target='_blank' rel='lightbox-photos' title=''><img src='http://farm5.static.flickr.com/4008/4646832834_784a0a9ed1_t.jpg' alt='' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4066/4646218735_b37d8fd9e5.jpg' target='_blank' rel='lightbox-photos' title='DSC05524'><img src='http://farm5.static.flickr.com/4066/4646218735_b37d8fd9e5_t.jpg' alt='DSC05524' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4054/4646830604_97afd54623.jpg' target='_blank' rel='lightbox-photos' title='DTLA graff'><img src='http://farm5.static.flickr.com/4054/4646830604_97afd54623_t.jpg' alt='DTLA graff' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4066/4646833048_7a9ab28733.jpg' target='_blank' rel='lightbox-photos' title='100_0243.jpg'><img src='http://farm5.static.flickr.com/4066/4646833048_7a9ab28733_t.jpg' alt='100_0243.jpg' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm4.static.flickr.com/3399/4646832626_de89d0fb0e.jpg' target='_blank' rel='lightbox-photos' title='6W????'><img src='http://farm4.static.flickr.com/3399/4646832626_de89d0fb0e_t.jpg' alt='6W????' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4005/4646832826_0d9e8afe19.jpg' target='_blank' rel='lightbox-photos' title='IMG_9381'><img src='http://farm5.static.flickr.com/4005/4646832826_0d9e8afe19_t.jpg' alt='IMG_9381' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4046/4646830752_dfc32b1740.jpg' target='_blank' rel='lightbox-photos' title='11'><img src='http://farm5.static.flickr.com/4046/4646830752_dfc32b1740_t.jpg' alt='11' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4010/4646215929_80b78f0007.jpg' target='_blank' rel='lightbox-photos' title='GEDC8592'><img src='http://farm5.static.flickr.com/4010/4646215929_80b78f0007_t.jpg' alt='GEDC8592' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4064/4646832384_7fc8d31e11.jpg' target='_blank' rel='lightbox-photos' title='2010 Advanced Grappling'><img src='http://farm5.static.flickr.com/4064/4646832384_7fc8d31e11_t.jpg' alt='2010 Advanced Grappling' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4049/4646218143_c108276325.jpg' target='_blank' rel='lightbox-photos' title='P1270352'><img src='http://farm5.static.flickr.com/4049/4646218143_c108276325_t.jpg' alt='P1270352' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4009/4646217767_3900f39475.jpg' target='_blank' rel='lightbox-photos' title='P1270351'><img src='http://farm5.static.flickr.com/4009/4646217767_3900f39475_t.jpg' alt='P1270351' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4027/4646831284_30b6e6da36.jpg' target='_blank' rel='lightbox-photos' title='Image245'><img src='http://farm5.static.flickr.com/4027/4646831284_30b6e6da36_t.jpg' alt='Image245' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm4.static.flickr.com/3399/4646218295_63a899d322.jpg' target='_blank' rel='lightbox-photos' title='IMG_0037'><img src='http://farm4.static.flickr.com/3399/4646218295_63a899d322_t.jpg' alt='IMG_0037' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4059/4646218159_01d5b02c3f.jpg' target='_blank' rel='lightbox-photos' title='DooDah2010-6665'><img src='http://farm5.static.flickr.com/4059/4646218159_01d5b02c3f_t.jpg' alt='DooDah2010-6665' height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://farm5.static.flickr.com/4053/4646834404_615e09b715.jpg' target='_blank' rel='lightbox-photos' title='IMG_2668'><img src='http://farm5.static.flickr.com/4053/4646834404_615e09b715_t.jpg' alt='IMG_2668' height=100px; width=100px; style='border:0px;'/></a></li> </ul> </div> <div id="videos"> <h2> Recent Videos </h2> <ul> <li><a href='http://www.youtube.com/watch?v=_oc5-0yFoYg&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/_oc5-0yFoYg/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=1pRXKeYVYHc&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/1pRXKeYVYHc/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=yzRQUu-ZBdw&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/yzRQUu-ZBdw/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=mud-A76nLro&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/mud-A76nLro/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=TLOboW19_OA&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/TLOboW19_OA/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=PcYja2jjvi0&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/PcYja2jjvi0/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=KKjklCEMrPk&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/KKjklCEMrPk/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=AyUwY6PRX0Y&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/AyUwY6PRX0Y/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=8Sf2-7RjVYs&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/8Sf2-7RjVYs/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=xGMayoJmhE8&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/xGMayoJmhE8/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=paseBeB6Cb8&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/paseBeB6Cb8/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li><li><a href='http://www.youtube.com/watch?v=l_FSRUtMMik&feature=youtube_gdata' target='_blank'><img src='http://i.ytimg.com/vi/l_FSRUtMMik/default.jpg'height=100px; width=100px; style='border:0px;'/></a></li> </ul> </div> </div><!-- #content -->

    Read the article

  • internet explorer and google chrome rendering issues

    - by jeansymolanza
    hi guys, i'm trying to build a login and main page on dreamweaver for a client and testing them in google chrome and internet explorer but i am running into a lot of unexpected difficulties. the main thing has to be the way the tables are being rendered on the different pages. it seems to appear well on google chrome but when i test the page under internet explorer there have been issues with the way the footer is being rendered. i've included several images showing the problem: login page on IE8 http://i39.tinypic.com/iz9lw3.jpg login page on google chrome http://i44.tinypic.com/1zn0qd2.jpg main page on IE8 http://i41.tinypic.com/2d0gyhf.jpg main page on google chrome http://i42.tinypic.com/2ry58aw.jpg login fail on IE8 http://i40.tinypic.com/2jea9ac.jpg login fail on google chrome http://i43.tinypic.com/sl35h2.jpg please help! i have included the source code below. i spent an entire night trying to figure out what was wrong but to little success. login page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" href="resources/css_01.css"> <link rel="shortcut icon" href="resources/favicon.ico"> <title>Speedy CMS</title> <script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script> <script src="SpryAssets/SpryValidationPassword.js" type="text/javascript"></script> <link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" /> <link href="SpryAssets/SpryValidationPassword.css" rel="stylesheet" type="text/css" /> </head> <body class="oneColElsCtr" background="resources/bg_01.jpg"> <div id="container"> <div id="mainContent"> <!-- start #mainContent --> <table id="Table_01" width="1024" height="100%" border="0" cellpadding="0" cellspacing="0"> <tr> <td valign="top" rowspan="3"> <img src="resources/login_01.png" width="93" height="440" alt=""></td> <td valign="top" rowspan="3"> <img src="resources/login_02.png" width="457" height="440" alt=""></td> <td valign="top"> <img src="resources/login_03.png" width="474" height="86" alt=""></td> </tr> <tr> <td valign="top"><img src="resources/login_04.png" width="474" height="89" /></td> </tr> <tr> <td valign="top" width="100%" height="100%" align="left"> <form ACTION="<?php echo $loginFormAction; ?>" METHOD="POST" name="login" > <h3 class="login">Username</h3> <span id="sprytextfield1"> <input name="username" type="text" class="input" /> </span> <h3 class="login">Password</h3> <span id="sprypassword1"> <input name="password" type="password" class="input" /> </span> <p></p> <div align="left" style="width:474px; padding-top: 10px; padding-left: 100px;"> <input name="login" type="submit" id="Log in" value="Log in" class="btn"/> </div> </p> </form> </td> </tr> </table> </div> </div> <!-- end #mainContent --> <!-- start #footer --> <?php include("resources/footer.php"); ?> <!-- end #footer --> <script type="text/javascript"> <!-- var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1"); var sprypassword1 = new Spry.Widget.ValidationPassword("sprypassword1"); //--> </script> </body> </html> main page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" href="resources/css_01.css"> <link rel="shortcut icon" href="resources/favicon.ico"> <title>Speedy CMS</title> <body class="oneColElsCtr" background="resources/bg_01.jpg"> <div id="container"> <div id="mainContent"> <!-- start #mainContent --> <table id="Table_01" width="1024" border="0" cellpadding="0" cellspacing="0"> <tr> <td rowspan="7"> <img src="resources/main_01.png" width="93" height="440" alt=""></td> <td colspan="2"> <img src="resources/main_02.png" width="457" height="95" alt=""></td> <td colspan="3" valign="bottom"> <!-- start #navbar --> <?php include("resources/navbar.php"); ?> <!-- end #navbar --> </td> </tr> <tr> <td colspan="2"> <img src="resources/main_04.png" width="457" height="1" alt=""></td> <td colspan="3" rowspan="2" valign="top"><a class="bottom2" href="<?php echo $logoutAction ?>">Log off</a></td> </tr> <tr> <td colspan="2"> <img src="resources/main_06.png" width="457" height="29" alt=""></td> </tr> <tr> <td rowspan="4"> <img src="resources/main_07.png" width="456" height="315" alt=""></td> <td colspan="2"> <img src="resources/main_08.png" width="75" height="94" alt=""></td> <td rowspan="3"> <img src="resources/main_09.png" width="6" height="281" alt=""></td> <td align="left" valign="middle" style="padding-left:20px;"><h2 class="home">Hello, <?php echo $_SESSION['MM_Username']; ?></h2></td> </tr> <tr> <td rowspan="3"> <img src="resources/main_11.png" width="1" height="221" alt="" /></td> <td> <img src="resources/main_12.png" width="74" height="90" alt=""></td> <td align="left" valign="middle" style="padding-left:20px;"><h3 class="home"><?php echo date("l F d, Y, h:i A"); ?></h3></td> </tr> <tr> <td> <img src="resources/main_14.png" width="74" height="97" alt="" /></td> <td align="left" valign="middle" style="padding-left:20px;"><h3 class="home">You currently have <a href="progress.php" class="main"><?php echo $totalCases; ?> claims</a> running</h3></td> </tr> <tr> <td colspan="3"> <img src="resources/main_16.png" width="474" height="34" alt=""></td> </tr> </table> </div> </div> <!-- end #mainContent --> <!-- start #footer --> <?php include("resources/footer.php"); ?> <!-- end #footer --> </body> </html> <?php mysql_free_result($tbl_accident); ?> login fail page <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" href="resources/css_01.css"> <link rel="shortcut icon" href="resources/favicon.ico"> <title>Speedy CMS</title> <script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script> <script src="SpryAssets/SpryValidationPassword.js" type="text/javascript"></script> <link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" /> <link href="SpryAssets/SpryValidationPassword.css" rel="stylesheet" type="text/css" /> </head> <body class="oneColElsCtr" background="resources/bg_02.jpg"> <div id="container"> <div id="mainContent"> <table id="Table_01" width="1024" height="" border="0" cellpadding="0" cellspacing="0"> <tr> <td rowspan="4"> <img src="resources/default2_01.png" width="93" height="440" alt=""></td> <td colspan="2"><img src="resources/default_02.png" width="457" height="95" /></td> <td valign="bottom"></td> </tr> <tr> <td colspan="2"> <img src="resources/default2_03.png" width="457" height="1" alt=""></td> <td> <img src="resources/default2_04.png" width="474" height="1" alt=""></td> </tr> <tr> <td colspan="3"> <div align="left" style="padding-left: 18px;"> <h3 class="loginfail">Sorry, but your username and password is incorrect.</h3> <h4 class="loginfail">Please try again!</h4> <form ACTION="<?php echo $loginFormAction; ?>" METHOD="POST" name="login" > <h5 class="loginfail">Username</h5> <span id="sprytextfield1"> <input name="username" type="text" class="input2" /> </span> <h5 class="loginfail">Password</h5> <span id="sprypassword1"> <input name="password" type="password" class="input2" /> </span> <img src="resources/spacer.gif" width="1" height="5" alt="" /> <p></p> <div align="left" style="width:474px; padding-top: 10px;"> <input name="login" type="submit" id="Log in" value="Log in" class="btn"/> </div> </p> </form> </td> </tr> <tr> <td colspan="3" height="100%"> </td> </tr> <tr> <td> <img src="resources/spacer.gif" width="93" height="1" alt=""></td> <td> <img src="resources/spacer.gif" width="337" height="1" alt=""></td> <td> <img src="resources/spacer.gif" width="120" height="1" alt=""></td> <td> <img src="resources/spacer.gif" width="474" height="1" alt=""></td> </tr> </table> </div> </div> <!-- start #footer --> <?php include("resources/footer2.php"); ?> <!-- end #footer --> <script type="text/javascript"> <!-- var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1"); var sprypassword1 = new Spry.Widget.ValidationPassword("sprypassword1"); //--> </script> </body> </html> footer.php <table width="1024px" border="0" cellspacing="0" cellpadding="0" style="padding-left: 200px; padding-top: 10px; padding-bottom: 36px; text-align: left;"> <!-- speedy claim links --> <td width="33%" valign="top"> <div class="bottom" style="padding-left: 40px; text-align: left;">Learn About Us</div> <div class="hr" style="margin-left: 40px; width: 200px;"><hr /></div> <div style="padding-left: 40px; text-align: left;"> <a href="http://www.speedyclaim.co.uk/php/gifts.php" class="bottom2" target="_blank">Free Gifts</a><BR /> <a href="http://www.speedyclaim.co.uk/php/calculator.php" class="bottom2" target="_blank">Injury Calculator</a><BR /> <a href="http://www.speedyclaim.co.uk/php/aboutus.php" class="bottom2" target="_blank">About Us</a><BR /> <a href="http://www.speedyclaim.co.uk/php/claimonline.php" class="bottom2" target="_blank">Claim Online</a><BR /> <a href="http://www.speedyclaim.co.uk/php/contactus.php" class="bottom2" target="_blank">Contact Us</a><BR /> </div> </td> <!-- speedy claim links --> <td width="33%" valign="top"> <div class="bottom" style="padding-left: 40px; text-align: left;">Get Help</div> <div class="hr" style="margin-left: 40px; width: 200px;"><hr /></div> <div style="padding-left: 40px;"> <a href="http://www.speedyclaim.co.uk/php/services.php#roadaccident" class="bottom2" target="_blank">Road Traffic Accident</a><BR /> <a href="http://www.speedyclaim.co.uk/php/services.php#workaccident" class="bottom2" target="_blank">Work Accident</a><BR /> <a href="http://www.speedyclaim.co.uk/php/services.php#criminalinjury" class="bottom2" target="_blank">Criminal Injury</a><BR /> <a href="http://www.speedyclaim.co.uk/php/services.php#medicalnegligence" class="bottom2" target="_blank">Medical Neglicence</a><BR /> <a href="http://www.speedyclaim.co.uk/php/services.php#publicl" class="bottom2" target="_blank">Public Liability</a><BR /> <a href="http://www.speedyclaim.co.uk/php/services.php#taxiaccident" class="bottom2" target="_blank">Taxi Related Accident</a><BR /> </div> <!-- speedline --> <td width="33%" valign="top"> <div class="bottom" style="padding-left: 40px; text-align: left;">Taxi Service</div> <div class="hr" style="margin-left: 40px; width: 200px;"><hr /></div> <div style="padding-left: 40px;"> <a href="http://www.speedlinetaxi.com/airport.asp" class="bottom2" target="_blank">Airport Meet & Greet</a><BR /> <a href="http://www.speedlinetaxi.com/register.asp" class="bottom2" target="_blank">Automated Booking</a><BR /> <a href="http://www.speedlinetaxi.com/business.asp" class="bottom2" target="_blank">Business Accounts</a><BR /> <a href="http://www.speedlinetaxi.com/technology.asp" class="bottom2" target="_blank">Technology</a><BR /> <a href="https://ebook.autocab.net/3037" class="bottom2" target="_blank">E-Booking</a><BR /> <a href="http://www.speedlinetaxi.com/recruitment.asp" class="bottom2" target="_blank">Recruitment</a><BR /> <a href="http://www.speedlinetaxi.com/feedback.asp" class="bottom2" target="_blank">Feedback</a><BR /> <BR /> </div> </td> <tr> <td colspan="3" valign="top" style="padding-top:5px; padding-left:40px;"> <span class="bottom"> &copy; <?php echo date("Y")?> Speedline </span> </td> </tr> </table> footer2.php <table width="100%" border="0" cellspacing="0" cellpadding="0" style="padding-left: 188px; padding-top: 10px; text-align: left;" align="center"> <!-- speedy claim links --> <tr> <td width="99%" valign="top" style="padding-top:5px; padding-left:40px; padding-bottom: 10px;"> <span class="bottom"> &copy; <?php echo date("Y")?> Speedline </span> </td> </tr> </table> css_01.css html, body { height: 100%; margin: 0 0 1px; padding: 0; } body { font: 100% Arial, Helvetica, sans-serif; background-repeat: repeat-x; margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */ padding: 0; text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */ color: #000000; } .oneColElsCtr #container { width: 1024px; margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */ text-align: left; /* this overrides the text-align: center on the body element. */ } .oneColElsCtr #mainContent { padding: 0 0px; /* remember that padding is the space inside the div box and margin is the space outside the div box */ text-align: right; } .loginfail { font-family: Arial, Helvetica, sans-serif; text-decoration:none; color: #3399cc; } .login { font-family: Arial, Helvetica, sans-serif; text-decoration:none; color: #3399cc; padding-left: 100px; } .navbar { font-family: Arial, Helvetica, sans-serif; text-decoration:none; color: #FFF; font-size: 16px; } .navbar:hover { font-family: Arial, Helvetica, sans-serif; text-decoration:underline; color: #FFF; font-size: 16px; } .login2 { font-family: Arial, Helvetica, sans-serif; font-size: 10px; text-decoration:none; color: #3399cc; } .window { font-family: Arial, Helvetica, sans-serif; font-size: 12px; text-decoration:none; } .login2:hover { font-family: Arial, Helvetica, sans-serif; font-size: 10px; text-decoration:underline; color: #3399cc; } .main { font-family: Arial, Helvetica, sans-serif; text-decoration:none; color: #3399cc; } .main:hover { font-family: Arial, Helvetica, sans-serif; text-decoration:underline; color: #3399cc; } .form { font-family: Arial, Helvetica, sans-serif; text-decoration:none; color: #3399cc; } .form:hover { font-family: Arial, Helvetica, sans-serif; text-decoration:underline; color: #3399cc; } .input { margin-left: 100px; background-color:#FFF; border: none; width: 14em; height: 1.2em; font-family: Arial, Helvetica, sans-serif; font-size: 22px; } .input2 { background-color: #F2F2F2; border: none; width: 14em; height: 1.2em; font-family: Arial, Helvetica, sans-serif; font-size: 22px; } .btn { height: 2em; width: 8em; color: #FFF; background: #3399cc; font-weight: bold; font-size: 18px; border: none; } .btn:hover { color: #FFF; background: #333; cursor: pointer; /* cursor: hand; for IE5 */ } .bottom { font-family: Arial, Helvetica, sans-serif; font-size: 12px; font-weight: bold; color: #7e8081; } .bottom2 { font-family: Arial, Helvetica, sans-serif; font-size: 12px; text-decoration: none; color: #7e8081; } .bottom2:hover { font-family: Arial, Helvetica, sans-serif; font-size: 12px; text-decoration: underline; color: #7e8081; } .bottom3 { font-family: Arial, Helvetica, sans-serif; font-size: 12px; text-decoration: none; color: #333; } .bottom3:hover { font-family: Arial, Helvetica, sans-serif; font-size: 12px; text-decoration: underline; color: #333; } div.hr { height: 1px; background: #CCC url(hr1.gif) no-repeat scroll center; } div.hr hr { display: none; } .home { font-family: Arial, Helvetica, sans-serif; text-decoration:none; color: #3399cc; } .form2 { font-family: Arial, Helvetica, sans-serif; text-decoration:none; font-size: 12px; } .rta {border-width: 1px; border-style: solid; border-color: #CCC; } .box { width: 100%; padding-right: 3px; color: #000; text-decoration:none; } .box:hover { width: 100%; padding-right: 3px; color: #000; text-decoration:underline;} .box2 { width: 100%; color: #C00; text-decoration:none; } .box2:hover { width: 100%; padding-right: 3px; color: #C00; text-decoration:underline;} thanking in you advance. God bless.

    Read the article

  • Content Box is a Little Off in IE9 ... How to Fix?

    - by Kelsey Nealon
    Hi there! I have a website at www.thetotempole.ca and when viewed in IE9... My websites content box (The green wooden backgrounded box with content inside) is moved slightly over to the left making a space between the actual container and the content box... Is there anyway I can fix this without harming any of the other browsers? Thanks! Screenshot: HTML: <!DOCTYPE html> <head> <title>The Totem Pole News - Movies</title> <!-- Start WOWSlider.com HEAD section --> <link rel="stylesheet" type="text/css" href="engine1/style.css" /> <script type="text/javascript" src="engine1/jquery.js"></script> <!-- End WOWSlider.com HEAD section --> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-45342007-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> <meta charset="utf-8"> <meta name="description" content="A totem pole themed news website posting articles on news, music, movies, video games, and health."> <link href="thecss2.css" rel="stylesheet" type="text/css"> <link rel="icon" type="image/ico" href="images/favicon.ico"> <meta http-equiv="X-UA-Compatible" content="IE=8" /> </head> <body> <div id="container"> <div id="contentbox" align="Center"> <a href="index.html"><div id="banner" align="Center"> </div></a> <div id="navbar"> <p><a href="index.html"><img src="images/home.png" width="65" height="54" alt="picture of a house to relate to the home page (content)" style="position: absolute; left: 23px; top: 16px; width: 57px; height: 48px;"><span style="position: absolute; left: 24px; z-index:2; top: 71px; height: 23px;">Content</span></a> <a href="#"><img src="images/eagleicon.gif" width="73" height="39" alt="An Eagle icon for the News section of the Totem Pole" style="position: absolute; left: 111px; top: 28px;"><span style="position: absolute; z-index: 2; left: 127px; top: 72px;">News</span></a> <a href="#"><img src="images/owlicon.gif" width="81" height="61" alt="An Owl icon for the Music section of the totem pole" style="position: absolute; left: 210px; top: 11px;"><span style="position: absolute; z-index:2; left: 226px; top: 73px;"><strong>Music</strong></span></a><a href="movies.html"><img src="images/wolficon.gif" width="88" height="54" alt="A Wolf icon for the Movies section of the totem pole" style="position: absolute; left: 320px; top: 15px;"><span style="position: absolute; left: 336px; top: 72px; z-index:2;"><strong>Movies</strong></span></a> <a href="#"><img src="images/hareimage.gif" width="60" height="56" alt="A Hare icon for Video Game section of the Totem Pole" style="position: absolute; left: 441px; top: 13px;"><span style="position: absolute; z-index:2; left: 428px; top: 73px;"><strong>Video Games</strong></span></a> <a href="#"><img src="images/bearicon.gif" width="91" height="57" alt="A bear icon for the Health section of The Totem Pole" style="position: absolute; left: 551px; top: 13px;"><span style="position: absolute; left: 580px; top: 72px; z-index:2;">Health</span></a></p> </div> <!--Nav Bar 2--> <div id="navbar2"> <a href="#">About Us</a> <a href="#">Feedback</a> <a href="#">Subscribe</a> </div> <!-- Atomz HTML for Search --> <div id="searchbar"> <form method="get" action="http://search.atomz.com/search/"> <input id="searchbox" size="13" name="sp_q" value="Search..." onFocus="if (this.value == 'Search...') {this.value=''}"> <input class="css_btn_class" type="submit" value="Search"> <input type="hidden" name="sp_a" value="sp1005092e"> <input type="hidden" name="sp_p" value="all"> <input type="hidden" name="sp_f" value="UTF-8"> </form> </div> <!-- Start WOWSlider.com BODY section --> <div id="mywowslider"> <div id="wowslider-container1"> <div class="ws_images"> <ul> <li><img src="images/anchor.jpg" alt="Ron Burgundy" title="Ron Burgundy" id="wows1_0"/>Played by Will Ferrell</li> <li><img src="images/anchor2.jpg" alt="Brian Fantana" title="Brian Fantana" id="wows1_1"/>Played by Paul Rudd</li> <li><img src="images/anchor3.jpg" alt="Brick Tamland" title="Brick Tamland" id="wows1_2"/>Played by Steve Carrell</li> <li><img src="images/anchor4.jpg" alt="Champ Kind" title="Champ Kind" id="wows1_3"/>Played by David Koechner</li> </ul> </div> <div class="ws_bullets"><div> <a href="#" title="Ron Burgundy"><img src="images/anchor.jpg" alt="Ron Burgundy"/>1</a> <a href="#" title="Brian Fantana"><img src="images/anchor2.jpg" alt="Brian Fantana"/>2</a> <a href="#" title="Brick Tamland"><img src="images/anchor3.jpg" alt="Brick Tamland"/>3</a> <a href="#" title="Champ Kind"><img src="images/anchor4.jpg" alt="Champ Kind"/>4</a> </div> </div> <span class="wsl"><a href="http://wowslider.com"></a></span> <div class="ws_shadow"></div> </div> <script type="text/javascript" src="engine1/wowslider.js"></script> <script type="text/javascript" src="engine1/script.js"></script> </div> <!-- End WOWSlider.com BODY section --> <!-- AddThis Smart Layers BEGIN --> <!-- Go to http://www.addthis.com/get/smart-layers to customize --> <script type="text/javascript" src="//s7.addthis.com/js/300/addthis_widget.js#pubid=ra-5279b96309e7df24"></script> <script type="text/javascript"> addthis.layers({ 'theme' : 'transparent', 'share' : { 'position' : 'left', 'numPreferredServices' : 5 } }); </script> <!-- AddThis Smart Layers END --> <div id="sources"><p> Source(s): <a href="http://en.wikipedia.org/wiki/Anchorman_2:_The_Legend_Continues">wikipedia.com</a></p></div> <div id="infocontent"> <p align="left"><em><strong> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Anchorman 2: The Legend Continues</strong></em> is an upcoming American comedy film being released on December 20, 2013, also a sequel to the 2004 film <em>Anchorman: The Legend of Ron Burgandy</em>. On March 28, 2012, actor Will Ferrell officially announced the sequel dressed in character as Ron Burgundy on the late-night talk-show <em>Conan</em>. As with the original film, it is directed by Adam McKay, produced by Judd Apatow, stars Will Ferrell and is written by Adam McKay and Will Ferrell. Unlike the original film, which was distributed by DreamWorks Pictures, <em>The Legend Continues</em> will be distributed by Paramount Pictures.</p> <p align="left"><em><strong>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</strong></em>The movie now has a website at <a href="www.anchormanmovie.com">www.anchormanmovie.com</a> where a countdown for the release of this film can be seen. By the looks of these images, I think we can expect big things when the movie comes out this December. Enjoy the poster photos and trailers all posted below, and don't forget to submit your vote in the poll!</p> </div> <div id="trailer1"><iframe width="560" height="315" src="//www.youtube.com/embed/Elczv0ghqw0?rel=0" frameborder="0" allowfullscreen></iframe></div> <div id="trailer2"> <iframe width="560" height="315" src="//www.youtube.com/embed/mZ-JX-7B3uM?rel=0" frameborder="0" allowfullscreen></iframe> </div> <div id="poll"> <form method="post" action="http://poll.pollcode.com/763294"><table style="border: black 1px solid;" border="1" width="175" bgcolor="EEEEEE" cellspacing="2" cellpadding="0"><tr><td colspan="2" height="10"><font face="Verdana" size="2" color="000000"><b>What Rating Do You Think This Will Recieve</b></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="1" id="763294answer1"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer1">10</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="2" id="763294answer2"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer2">9</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="3" id="763294answer3"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer3">8</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="4" id="763294answer4"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer4">7</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="5" id="763294answer5"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer5">6</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="6" id="763294answer6"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer6">5</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="7" id="763294answer7"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer7">4</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="8" id="763294answer8"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer8">3</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="9" id="763294answer9"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer9">2</label></font></td></tr><tr><td width="5"><input type="radio" name="answer" value="10" id="763294answer10"></td><td>&nbsp;<font face="Verdana" size="2" color="000000"><label for="763294answer10">1</label></font></td></tr><tr><td colspan="2" height="10"><center><input type="submit" value=" Vote ">&nbsp;&nbsp;<input title="Clicking this will send you to a new page" type="submit" name="view" value=" View "></center></td></tr><tr><td colspan="2" align="right"><font face="Verdana" height="5" size="1" color="000000"></font></td></tr></table></form></div> <span style="position: absolute; left: 0px; top: 225px; width: 1000px; border-bottom: 2px black double; height: 58px;"> <h1 style="font-weight: normal; font-size:28px"><em>Anchorman 2 Arrives Soon</em></h1></span> <div id="contentbox2"></div> <!--Footer Div --> <center><div id="footer"><a href="#">Sitemap</a> <a href="#">About Us</a> <a href="#">Feedback</a></div></center> <div id="disqus"><div id="disqus_thread"></div> <script type="text/javascript"> /* * * CONFIGURATION VARIABLES: EDIT BEFORE PASTING INTO YOUR WEBPAGE * * */ var disqus_shortname = 'thetotempoleanchorman2'; // required: replace example with your forum shortname /* * * DON'T EDIT BELOW THIS LINE * * */ (function() { var dsq = document.createElement('script'); dsq.type = 'text/javascript'; dsq.async = true; dsq.src = '//' + disqus_shortname + '.disqus.com/embed.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(dsq); })(); </script> <noscript>Please enable JavaScript to view the <a href="http://disqus.com/?ref_noscript">comments powered by Disqus.</a></noscript> <a href="http://disqus.com" class="dsq-brlink">comments powered by <span class="logo-disqus">Disqus</span></a></div> <!-- This is the end of the contentbox --></div> <!-- This is the end of the container div --> </div> </body> </html> CSS: html { background: url(images/pine.jpg) no-repeat center center fixed; -webkit-background-size: cover; -moz-background-size: cover; -o-background-size: cover; background-size: cover; filter: progid:DXImageTransform.Microsoft.AlphaImageLoader(src='images/pine.jpg', sizingMethod='scale'); -ms-filter: "progid:DXImageTransform.Microsoft.AlphaImageLoader(src='images/pine.jpg', sizingMethod='scale')"; } body { margin-bottom:0px; font-family: Verdana, Geneva, sans-serif; } a { outline : none; border: none; } a:hover { color: #0FC; } #container { width: 1000px; height:1924px; position:relative; margin-right: auto; margin-left: auto; z-index:1; margin-bottom: 50px; } #facebook { position:fixed; right:100px; z-index:15; } #twitter { position:fixed; z-index:16; right:120px; } #google { position:fixed; top:7px; right: 135px; } #socialmediaplugins { text-align: right; position: fixed; background: rgb(125,126,125); /* Old browsers */ background: -moz-linear-gradient(top, rgba(125,126,125,1) 0%, rgba(247,247,247,1) 100%); /* FF3.6+ */ background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(125,126,125,1)), color-stop(100%,rgba(247,247,247,1))); /* Chrome,Safari4+ */ background: -webkit-linear-gradient(top, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* Chrome10+,Safari5.1+ */ background: -o-linear-gradient(top, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* Opera 11.10+ */ background: -ms-linear-gradient(top, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* IE10+ */ background: linear-gradient(to bottom, rgba(125,126,125,1) 0%,rgba(247,247,247,1) 100%); /* W3C */ filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#7d7e7d', endColorstr='#f7f7f7',GradientType=0 ); /* IE6-9 */ margin: 0px; top: 0px; left: 0px; right: 0px; z-index:14; } #searchbox { background-color:#01bff6; border-radius:4px; } #searchbox:hover { background-color:#76b618; border-radius:4px; } #searchbox:active { background-color:#01bff6; border-radius:4px; } #contentbox { background-color:black; background-image:url(images/wooden.jpg); width: 1000px; margin-bottom:50px; height: 1924px; box-shadow:2px 2px 10px 10px #060606; -webkit-box-shadow:2px 2px 10px 10px #060606; -moz-box-shadow:2px 2px 10px 10px #060606; /* For IE<9 */ filter: progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=0,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=45,strength=2), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=90,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=135,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=180,strength=10), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=225,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=270,strength=5), progid:DXImageTransform.Microsoft.Shadow(color=#060606,direction=315,strength=2); } #contentbox2 { background-image:url(images/woodenmovies.jpg); top:299px; width: 1000px; margin-bottom:50px; height: 1625px; position: absolute; } #banner { background-image:url(images/totempolebanner.gif); position:absolute; top:25px; width:768px; height:120px; left:116px; } #navbar { float: left; position: absolute; top: 146px; left: 76px; width: 844px; height: 158px; font-weight:bold; } #navbar a { color:#0C6; font-size: 13px; } #navbar a:hover { color:#0F9; font-size: 13px; } #navbar2 a:hover { color:#0F9; } #navbar2 a{ text-decoration:none; color:#0C6; } #navbar2 { position: absolute; top: 4px; left: 766px; width: 273px; height: 24px; font-size: 11px; } #searchbar { position: absolute; top: 23px; left: 885px; width: 118px; height: 69px; } .css_btn_class { font-size:9px; position: relative; top:0px; right:4px; width:90px; height:25px; font-family:Verdana; font-weight:normal; -moz-border-radius:7px; -webkit-border-radius:7px; border-radius:7px; border:1px solid #35d914; padding:7px 24px; text-decoration:none; background:-webkit-gradient( linear, left top, left bottom, color-stop(5%, #ff9d00), color-stop(100%, #ffe711) ); background:-moz-linear-gradient( center top, #ff9d00 5%, #ffe711 100% ); background:-ms-linear-gradient( top, #ff9d00 5%, #ffe711 100% ); background-color:#ff9d00; color:#ff0000; display:inline-block; text-shadow:0px 0px 1px #117cff; -webkit-box-shadow: 0px 0px 0px 0px #117cff; -moz-box-shadow: 0px 0px 0px 0px #117cff; box-shadow: 0px 0px 0px 0px #117cff; background-image: url(images/unnamed.gif); background-repeat:no-repeat; background-position:right; }.css_btn_class:hover { width:90px; background:-webkit-gradient( linear, left top, left bottom, color-stop(5%, #ffe711), color-stop(100%, #ff9d00) ); background:-moz-linear-gradient( center top, #ffe711 5%, #ff9d00 100% ); background:-ms-linear-gradient( top, #ffe711 5%, #ff9d00 100% ); background-color:#ffe711; background-image: url(images/unnamed.gif); background-repeat:no-repeat; background-position:right; }.css_btn_class:active { position:relative; width:90px; top:1px; background-image: url(images/unnamed.gif); background-repeat:no-repeat; background-position:right; } /* This css button was generated by css-button-generator.com */ img {border:none;} #eagle { position:relative; right: 144px; top:299px; } #owl { top:624px; position:absolute; left:0px; } #wolf { top:949px; position:absolute; right:0px; } #hare { top:1274px; position:absolute; left:0px; } #bear { top:1599px; position:absolute; right:0px; } #footer { position: absolute; left: 393px; top: 1941px; width: 251px; color: #0F9; } #footer a { color: #0f9; } .atss { left: 0; } #infocontent { position: absolute; z-index: 3; left: 15px; top: 333px; height: 348px; width: 789px; } #mywowslider { position: absolute; z-index: 3; left: 640px; top: 684px; } #poll { position: absolute; z-index: 3; left: 815px; top: 344px; } #trailer1 { position: absolute; z-index: 3; left: 40px; top: 598px; } #trailer2 { position: absolute; z-index: 3; left: 40px; top: 948px; } #trailer1header { position: absolute; z-index: 3; left: 200px; top: 550px; width: 240px; font-style: italic; font-weight: normal; } #trailer2header { position: absolute; z-index: 3; left: 200px; top: 898px; width: 241px; height: 51px; font-style: italic; font-weight: normal; } #disqus { position: absolute; z-index: 3; left: 0px; top: 1340px; } #sources { position: absolute; z-index: 3; left: 394px; top: 1249px; width: 212px; }

    Read the article

  • Primefaces p:fileupload component problem

    - by Nitesh Panchal
    Hello, I am using Primefaces 2.0.1 but the FileUpload component is not working properly. It uses JQuery uploadify behind the scenes. This is my web.xml <?xml version="1.0" encoding="UTF-8"?> <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd"> <filter> <filter-name>PrimeFaces FileUpload Filter</filter-name> <filter-class>org.primefaces.webapp.filter.FileUploadFilter</filter-class> </filter> <filter-mapping> <filter-name>PrimeFaces FileUpload Filter</filter-name> <servlet-name>Faces Servlet</servlet-name> </filter-mapping> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>Faces Servlet</servlet-name> <url-pattern>*.jsf</url-pattern> </servlet-mapping> <servlet> <servlet-name>Resource Servlet</servlet-name> <servlet-class>org.primefaces.resource.ResourceServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>Resource Servlet</servlet-name> <url-pattern>/primefaces_resource/*</url-pattern> </servlet-mapping> <welcome-file-list> <welcome-file>index.jsf</welcome-file> </welcome-file-list> </web-app> This is my index.xhtml :- <?xml version='1.0' encoding='UTF-8' ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:p="http://primefaces.prime.com.tr/ui"> <h:head> <title>Facelet Title</title> </h:head> <h:body> <h:form prependId="false"> <h:commandButton actionListener="#{NewJSFManagedBean.add}" value="add"/> <p:fileUpload auto="false" widgetVar="fileUpl" fileUploadListener="#{NewJSFManagedBean.saveFile}"/> </h:form> </h:body> </html> I have following libraries in my classpath :- primefaces 2.0.1 commons-beanutils commons-beanutils-bean-collection commons-digestor commons-fileUpload commons-io commons-logging jhighlight The file gets correctly uploaded in /tmp but in browser it always says HTTP error. Please help me. It used to work till yesterday. But today i did a fresh installation of Glassfish and it has stopped working.

    Read the article

  • Facing Null Pointer Exception while using BIRT

    - by srikanth
    Hi, I am using BIRT APIs in a java program.My code is : package com.tecnotree.mdx.product.utils; import java.util.HashMap; import java.util.logging.Level; import org.eclipse.birt.core.exception.BirtException; import org.eclipse.birt.core.framework.Platform; import org.eclipse.birt.report.engine.api.EngineConfig; import org.eclipse.birt.report.engine.api.EngineConstants; import org.eclipse.birt.report.engine.api.HTMLRenderOption; import org.eclipse.birt.report.engine.api.IReportEngine; import org.eclipse.birt.report.engine.api.IReportEngineFactory; import org.eclipse.birt.report.engine.api.IReportRunnable; import org.eclipse.birt.report.engine.api.IRunAndRenderTask; import org.eclipse.birt.report.engine.api.ReportEngine; public class ExampleReport { public static void main(String[] args) { // Variables used to control BIRT Engine instance ReportEngine eng = null; IReportRunnable design = null; IRunAndRenderTask task = null; HTMLRenderOption renderContext = null; HashMap contextMap = null; HTMLRenderOption options = null; final EngineConfig conf = new EngineConfig(); conf .setEngineHome("C:\\birt-runtime-2_5_2\\birt-runtime-2_5_2\\ReportEngine"); System.out.println("conf " + conf.getBIRTHome()); conf.setLogConfig(null, Level.FINE); try { Platform.startup(conf); } catch (BirtException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } IReportEngineFactory factory = (IReportEngineFactory) Platform .createFactoryObject(IReportEngineFactory.EXTENSION_REPORT_ENGINE_FACTORY); System.out.println("Factory : " + factory.toString()); System.out.println(conf.toString()); IReportEngine engine = factory.createReportEngine(conf); System.out.println("Engine : " + engine); try { design = eng .openReportDesign("C:\\birt-runtime-2_5_2\\birt-runtime-2_5_2\\ReportEngine\\samples\\hello_world.rptdesign"); } catch (Exception e) { System.err .println("An error occured during the opening of the report file!"); e.printStackTrace(); System.exit(-1); } task = eng.createRunAndRenderTask(design); renderContext = new HTMLRenderOption(); renderContext.setImageDirectory("image"); contextMap = new HashMap(); contextMap.put(EngineConstants.APPCONTEXT_HTML_RENDER_CONTEXT, renderContext); task.setAppContext(contextMap); options = new HTMLRenderOption(); options.setOutputFileName("c:/temp/output.html"); options.setOutputFormat("html"); task.setRenderOption(options); try { task.run(); } catch (Exception e) { System.err.println("An error occured while running the report!"); e.printStackTrace(); System.exit(-1); } System.out.println("All went well. Closing program!"); eng.destroy(); } } But i am facing NullPointerException while creating the report. STACKTRACE : Exception in thread "main" java.lang.NullPointerException at org.eclipse.birt.report.engine.api.impl.ReportEngine$EngineExtensionManager.<init>(ReportEngine.java:784) at org.eclipse.birt.report.engine.api.impl.ReportEngine.<init>(ReportEngine.java:109) at org.eclipse.birt.report.engine.api.impl.ReportEngineFactory$1.run(ReportEngineFactory.java:18) at org.eclipse.birt.report.engine.api.impl.ReportEngineFactory$1.run(ReportEngineFactory.java:1) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.birt.report.engine.api.impl.ReportEngineFactory.createReportEngine(ReportEngineFactory.java:14) at com.tecnotree.mdx.product.utils.ExampleReport.main(ExampleReport.java:47) Please help me regarding this... my project deadline has been reached... Appreciate your Reply Thanks in Advance

    Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >