Search Results

Search found 93649 results on 3746 pages for 'protector one'.

Page 291/3746 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

• VPN Device behind router/firewall

  - by David Steven

  ROUTER A: Peplink 310 serving as the gateway/router/firewall at one location. ROUTER B: Linksys RV082 serving as the gateway/router/firewall at another location. I want to VPN these two locations together. The Peplink has a PPTP server and has proprietary site-to-site vpn if you had another peplink device. The Linksys has an IPsec vpn server. VPN A: I also have another spare linksys rv082. I'm trying to setup the other rv082 (VPN A) behind the peplink (ROUTER A) and get VPN A to talk to ROUTER B. I setup VPN A with a lan ip address and plugged one of it's LAN ports into the LAN. I was able to get to it's web interface fine. On ROUTER A I one-to-one nat mapped one of our public ip's to the LAN IP for VPN A. I opened TCP 50-51 and UDP 500 to VPN A. I configured the VPN settings on VPN A to connect to ROUTER B. I did the opposite for ROUTER B. But the vpn doesn't connect. Then I tried pluging VPN A's wan port into the lan, and gave it another LAN IP. I thought perpahs VPN A didn't want to send VPN traffic out over the LAN and wanted do send it over it's WAN. The vpn still doesn't connect. It what I'm trying to do even possible?

  Read the article

• Irc server for ubuntu

  - by Ralphz

  The Ubuntu WIKI https://help.ubuntu.com/community/IrcServer it lists few IRC servers you can use in Ubuntu. My question is which one is you favorite one and more secure. I will also need one that will allow me to monitor rooms for regular expressions and run some scripts if regexp matches. Thanks

  Read the article

• Using VLANs/subnetting to separate management from services?

  - by YouAreTheHat

  Background: I recently purchased a server and a managed switch for my home in the hopes of getting more experience and some fun toys to play with. The devices and appliances I either have or plan to have cover a broad spectrum: router, DD-WRT AP, Dell switch, OpenLDAP server, FreeRADIUS server, OpenVPN gateway, home PCs, gaming consoles, etc. I intend to segment my network with VLANs and associated subnets (e.g., VID10 is populated by devices on 192.168.10.0/24). The idea is to secure the more sensitive appliances by forcing traffic through my router/FW. Setup: After thinking and planning for some time, I have tentatively decided on 4 VLANs: one for the WAN connection, one for servers, one for home/personal devices, and one for management. In theory, the home VLAN will have limited access to the servers, and the management VLAN will be totally isolated for security. Question: Since I want to restrict access to management interfaces, but some appliances have to be accessible to other devices, is it possible/wise to have only management (SSH, HTTP, RDP) available on one VLAN/IP and only services (LDAP, DHCP, RADIUS, VPN) available on other? Is this a thing that is done? Does it gain me the security I think it does, or hurt me in some way?

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• How do special folders work on Windows 7?

  - by Martin

  Hello, I did something silly and accidentally moved my my special folders (My Documents, My Music etc.) to the Desktop. Once I noticed my mistake I quickly moved them back. But now my System acts erratically. It continuously creates new empty folders on my Desktop. And I have now two folders named "My Pictures" in my home directory. One of which is magically linked to the one in Desktop while on the command line one one is actually visible. If I delete the superfluous folders on Desktop then the explorer crashes. It is all a big mess. Of course I checked HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\User Shell Folders and it looks all ok there. So here the question: As anybody got any informations on how Windows 7 handles the special folders which might help be clean up the mess? I am well versed in using both the command line or the registry editor.

  Read the article

• Shareing two internet connections on my laptop running Windows XP

  - by ashwnacharya

  I have two internet connections, one is internet via our organization's corporate LAN network, and the other one is mobile broadband via a USB modem Is there anyway I can share internet connections and use them simultaneously? I want to use the corporate LAN network for normal browsing and connecting my email client, and I want to use the USB modem for establishing a VPN connection. Will I be able to maintain both the connections simultaneously? Can I have parallel downloads, one using our corporate network, and the other one using the mobile broadband? Will I be able to switch my browser between these two connections? My laptop runs Windows XP Service Pack 2.

  Read the article

• Virtualbox, Virtual guest OS issue

  - by user70370

  Hi, My host OS is: Ubuntu 10.10. One of my virtual OS is: Ubuntu 9.04 and another one is: Ubuntu 10.04. All of these virtualisation has been completed with Virtualbox. Now, I need to replicate those two servers, one server is running in Ubuntu 9.04 and another one is running in Ubuntu 10.04. Is it possible? If yes, can you please provide me some help? So, in short words, the whole thing is: Host: Ubuntu 10.10 Guest 1: Ubuntu 9.04 Guest 2: Ubuntu 10.04 Job: Must have to run two guests at a time. Because, two LDAP of two guests need to replicate. Now, If I try to get the first Guest ( hostname: mohib-laptop ) from second Guest ( hostname: zaman-laptop ), it is not getting! Do I need to change IP address of those both Guests? Or are there anything which will make it possible?

  Read the article

• Cannot ping my domain-joined server - Can only ping domain controller - host unreachable

  - by Vazgen

  I have a HyperV Server hosting a Domain Controller VM (192.168.1.50) and another VM (192.168.1.51) joined to this domain. I have: domain controller as DNS server forward lookup zone for the domain with host record for 192.168.1.50 and 192.168.1.51 Windows client has primary DNS server set to 192.168.1.50 and secondary to my ISP I can ping 192.168.1.50 (domain controller) successfully but cannot ping 192.168.1.51 (domain-joined VM) When pinging from Windows client: ping 192.168.1.51 Reply from 192.168.1.129 : Destination host unreachable When pinging from Domain Controller: ping 192.168.1.51 Reply from 192.168.1.50 : Destination host unreachable I have 2 virtual network adapters one PRIVATE for intranet (set to static IP 192.168.1.51) and one PUBLIC for internet with a dynamic IP. I noticed the the PUBLIC one inherited the "mydomain.com" domain subtitle after joining the domain... I don't know what this meant but it seemed more intuitive to me to switch THIS ONE to have the static IP. After I configured that I still could not ping but now I get: ping 192.168.1.51 Request timed out What seems to be the issue, I'm relatively new to networking.

  Read the article

• DVI vs VGA on Windows 7

  - by Joe Philllips

  I have a 3 monitor setup (each monitor is exactly the same). Two videocards, each with one splitter (one DVI and one VGA). I have two monitors hooked up using DVI and the third is connected through the VGA connection. I am running Windows 7. If I resize a window from one DVI monitor to the other, it's not a problem. It does so very smoothly. If I resize a window on the VGA monitor it is extremely choppy. Why? It's not choppy on other machines with only VGA connections. Has anyone else noticed this?

  Read the article

• Can you change the name of a flash drive on the boot menu?

  - by Mark Kramer

  I have two Staples brand Flash Drives. They work fine and they boot okay, but they have the same name on the boot menu, so when I have them both in the computer, I can't tell which one is the one I want to boot into. One has Ubuntu on it, the other BackTrack 5. However, the name of those drives show up different on different BIOS. What parameters affect what name shows up for a boot device and how

  Read the article

• Mobile CPU vs. Ultra-low CPU: performance

  - by Mike

  I'm choosing a new laptop and one of the questions is a type of CPU — mobile or ultra-low voltage. If to be more precise, I'm torn between two models of Intel Core i5 — i5-2410M and i5-3317U. Here is a comparison table. According to official specs the first-one has 2.3 GHz clock speed, while the second-one has only 1.7 GHz, that's about 25% difference. Is it really important parameter and which CPU is more preferable for a laptop for development, media and internet purposes?

  Read the article

• best practices for setting development environment

  - by Sharique

  I use Linux as primary OS. I need some suggestions regarding how should I set up my desktop and development. I do work on mostly .Net and Drupal, but some time on other lamp products and C/C++, Qt. I'm also interested in mobile (android..) and embedded development. Currently I install everything on my main OS, even I use it a little. I use VMs a little. Should I use separate VM for each kind of development (like one for .Net/Mono, another C++, one for mobile and one for db only, one for xyz things etc) Keep primary development environment on main os and moveothers in VM. main os should be messed up keep things easy to organize (must) performance should be optimal

  Read the article

• Redundant Microsoft server solution for small company

  - by MadBoy

  I'm planning to change one server Microsoft SBS 2003 with SharePoint, Exchange and SQL database into something that will provide me with some redundancy and won't be single point of failure. I was thinking to buy 2x exactly the same physical servers and put 2 virtualized servers on HyperV or VMWare on each. Then i would put SharePoint, Exchange and SQL on that 1 physical server (shared onto 2x VM's). I would like 2nd physical server to be exact duplicate of the first one so that when 1st server goes down (for reboot or hw failure), 2nd takes care of everything so that users don't even see anything changed (in terms all their emails, sharepoint stuff is available). My questions are: Will I have to pay for licenses for both servers even thou only one instance of SharePoint, Exchange, SQL will be used at same time? What are proposed solutions to do that? Any additional hardware I would need, any complicated software configuration to be expected to configure such redundancy so that when one physical server goes down 2nd one is taking care of rest? What problems should I expect? This solution is for 60 people. Later on it may or may expand.

  Read the article

• Setting up HTTPS across multiple servers

  - by JohnyD

  I'm looking to offer our online services over https and I'm having a couple of problems understanding how to accomplish this. To access our services you must pass through our ISA firewall to a Win2000 server running IIS6. About half our services are located here and the other half take you to a Win2003 server also running IIS6. So, in order to achieve this must each server have the proper certificate installed? ISA, IIS6_1 and IIS6_2? Is there a separate configuration that must be made to our ISA firewall? The other problem is with the CA and knowing how many certificates I need. It's important to note that the domain name for our services on IIS6_1 is www.domainname.com but the domain name on IIS6_2 is services.domainname.com. I believe that this will require me to purchase more than one certificate. It looks as though we will be going with Thawte's SSL123 as it's a good name and it's fast to get. Will I need to purchase 2 certificates (one for www that will be installed on our ISA firewall as well as IIS6_1, and one for services.domainname.com on IIS6_2)? Or will I need to purchase 3, the extra one being used on our firewall server? Another side question is about SAN's (subject alternative names). Is this basically adding sub-domains to your cert? So I could purchase one cert with 1 SAN for my www and services.? Thanks a lot for your help! Please let me know if I can provide any further information.

  Read the article

• DHCP Server on local machine

  - by EralpB

  Hello I am trying to setup a dhcp3-server on Ubuntu. But my question is more generic, if dhcp server is in a blockbox and all clients are connected to it I think I get what is going on but when dhcp server is installed on one of the "clients" that confuses me. When I send a dhcp packet from that client to the dhcp server, will my ethernet card read and write at the same time? Or will it handle it internally without writing any data to ethernet cable. It's the first time I am encountering these network things so I am a little bit confused. Also I wonder If I am in a big network with lan IP let's say 192.168.0.100 and I install a dhcp server to my computer, can any other computers accidentally get IP from my dhcp server? Every computer has one ethernet card (if that matters?). And every computer is connected to one router. I guess the answer is no because the broadcast message won't reach to my computer since when router receives a dhcp search packet it will answer and it won't let other computers know about it because they don't need to. And without router sending that packet one by one, it cannot travel further. I'd be glad if someone enlightens me. Thank you very much.

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• What is the safest way to create a boot sector on an existing system drive?

  - by zespri

  I have 2 drives in my PC one is primary master and used to be the system drive with windows XP installed. The second one is secondary and has Windows 7 installed that I'm using as the operating system. I want to decommission the old hard drive with XP and re-plug the Windows 7 one as the primary master so I could boot from it. What is the safest way for me to write the correct boot sector on the Windows 7 hard drive so I don't ruin my Windows 7 installation?

  Read the article

• Why have trackballs almost disappeared? [closed]

  - by Gary M. Mugford

  One of the movement sensors in my Microsoft Trackball Explorer has failed and right now I am using a mouse. Ugggh! I'll got steal one of the various Logitech trackballs spread around the house, but they all have issues. The Trackman has a horrible placement for the scroll wheel. Others have marbles for the thumb rather than a big ball for the fingers and at least one trackball is working around here without having a scroll wheel at all! (The one at the dinner table, for when I dine alone). My question is, why have trackballs fallen into disfavour? Seems to me that trackballs are great for crowded desktops (you know, the one with keyboards, notes, pens and coffee cups), and for laptops with those hated overly-sensitive touchpads. But right now, it seems to be a choice between that Logitech Trackman and some Kensington models that lack scroll wheels. All I want is a nice big ball to manipulate with the fingers and two buttons on the thumb side with the scroil wheel between them. Placement of other buttons is completely optional. Is that asking too much?

  Read the article

• 24TB RAID 6 configuration

  - by Phil

  I am in charge of a new website in a niche industry that stores lots of data (10+ TB per client, growing to 2 or 3 clients soon). We are considering ordering about $5000 worth of 3TB drives (10 in a RAID 6 configuration and 10 for backup), which will give us approximately 24 TB of production storage. The data will be written once and remain unmodified for the lifetime of the website, so we only need to do a backup one time. I understand basic RAID theory, however I am not experienced with it. My question is, does this sound like a good configuration? What potential problems could this setup cause? Also, what is the best way to do a one-time backup? Have two RAID 6 arrays, one for offsite backup and one for production? Or should I backup the RAID 6 production array to a JBOD? EDIT: The data server is running Windows 2008 Server x64. EDIT 2: To reduce rebuild time, what would you think about using two RAID 5's instead of one RAID 6?

  Read the article

• apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load...

  - by redguy..pl

  I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

  Read the article

• Engineers are using explosives to remove hard rock outside our office building. What countermeasures should we take?

  - by Karrax

  Our building is located approx. 100 meters from the explosive charges. They happen several times per day, and really shake the entire building a lot. This is going to go on for many days and the blasts are supposed to get stronger. Our server rooms are nothing fancy; one of them has all the racks on hard concrete while the other one has a raised floor (the one which allows the cables to go beneath it). Does anyone have any tips, countermeasures or best practices for us? Currently we are thinking of the following countermeasures: Daily report of the server rooms status lights (HD lights, power supplies and so on). Nightly check disk scan on the most important servers Order in extra supply of spare harddrives Edit: Many good answers here! However one needs to be accepted. The highest voted answer at the time of this edit will get their answer accepted.

  Read the article

• Postfix relay to multiple servers and multiple users

  - by Frankie

  I currently have postfix configured so that all users get relayed by the local machine with the exception of one user that gets relayed via gmail. To that extent I've added the following configuration: /etc/postfix/main.cf # default options to allow relay via gmail smtp_use_tls=yes smtp_sasl_auth_enable = yes smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt smtp_sasl_security_options = noanonymous # map the relayhosts according to user sender_dependent_relayhost_maps = hash:/etc/postfix/relayhost_maps # keep a list of user and passwords smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd /etc/postfix/relayhost_maps user-one@localhost [smtp.gmail.com]:587 /etc/postfix/sasl_passwd [smtp.gmail.com]:587 [email protected]:user-one-pass-at-google I know I can map multiple users to multiple passwords using smtp_sasl_password_maps but that would mean that all relay would be done by gmail where I specifically want all relay to be done by the localhost with the exception of some users. Now I would like to have a user-two@localhost (etc) relay via google with their own respective passwords. Is that possible?

  Read the article

• Is there an easy way to copy an audio CD in Mac OS X?

  - by Bob D

  (not a commercial CD). I did some recordings of a band years ago and ran into one of the band members who asked me if I could make copies. I assumed that this would be easy. I know that I can rip the CD into iTunes and then burn a new CD, but I have two optical drives available, is there a way to simply copy the CD from one drive to the other in one step?

  Read the article

• iWork '09 Keynote: is there is straightforward way to 'dim' and 'highlight' each item in a bullet li

  - by doug

  I have a bullet list on a slide: first item second item third item What I want to do is show those three bulleted items in a sequence like this: first bullet appears first bullet dims second bullet appears second bullet dims third bullet appears third bullet dims In other words, only one bullet is shown at a time (the one i am current discussing) to reduce audience distraction by what comes next or what i just finished discussing (the prior bullet). This is such a common thing to do, there's got to be a simple, reliable way to do it. The only way I know of is to configure the items individually (using "Build In" and "Action" on each bullet item, which is not only slow but doesn't work well). Another way i've found--which, again is very slow--is to create my bullet list not by selecting a bullet list, but to build the list manually with text boxes (one bullet item per text box) then line them up as a list. This way it's easier to manipulate them independently--again though, takes way too long to do one slide this way.

  Read the article

• Windows 7 Forbid connecting to a specific wireless network

  - by Elliot

  Does anyone know how to tell windows 7 to bar a wireless network? It keeps logging into a random open one with no bandwidth my neighbors have instead of the good one we have here. I keep unchecking "automatically log in if available" and it keeps re-checking itself. I want it to NEVER log into this network no matter what without manual intervention. I do not want to disable auto connecting, just tell it "do not ever connect to this one without my express permission".

  Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >