Search Results

Search found 54047 results on 2162 pages for 'domain name'.

Page 292/2162 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

• Improving Manageability of Virtual Environments

  - by Jeff Victor

  Boot Environments for Solaris 10 Branded Zones Until recently, Solaris 10 Branded Zones on Solaris 11 suffered one notable regression: Live Upgrade did not work. The individual packaging and patching tools work correctly, but the ability to upgrade Solaris while the production workload continued running did not exist. A recent Solaris 11 SRU (Solaris 11.1 SRU 6.4) restored most of that functionality, although with a slightly different concept, different commands, and without all of the feature details. This new method gives you the ability to create and manage multiple boot environments (BEs) for a Solaris 10 Branded Zone, and modify the active or any inactive BE, and to do so while the production workload continues to run. Background In case you are new to Solaris: Solaris includes a set of features that enables you to create a bootable Solaris image, called a Boot Environment (BE). This newly created image can be modified while the original BE is still running your workload(s). There are many benefits, including improved uptime and the ability to reboot into (or downgrade to) an older BE if a newer one has a problem. In Solaris 10 this set of features was named Live Upgrade. Solaris 11 applies the same basic concepts to the new packaging system (IPS) but there isn't a specific name for the feature set. The features are simply part of IPS. Solaris 11 Boot Environments are not discussed in this blog entry. Although a Solaris 10 system can have multiple BEs, until recently a Solaris 10 Branded Zone (BZ) in a Solaris 11 system did not have this ability. This limitation was addressed recently, and that enhancement is the subject of this blog entry. This new implementation uses two concepts. The first is the use of a ZFS clone for each BE. This makes it very easy to create a BE, or many BEs. This is a distinct advantage over the Live Upgrade feature set in Solaris 10, which had a practical limitation of two BEs on a system, when using UFS. The second new concept is a very simple mechanism to indicate the BE that should be booted: a ZFS property. The new ZFS property is named com.oracle.zones.solaris10:activebe (isn't that creative? ). It's important to note that the property is inherited from the original BE's file system to any BEs you create. In other words, all BEs in one zone have the same value for that property. When the (Solaris 11) global zone boots the Solaris 10 BZ, it boots the BE that has the name that is stored in the activebe property. Here is a quick summary of the actions you can use to manage these BEs: To create a BE: Create a ZFS clone of the zone's root dataset To activate a BE: Set the ZFS property of the root dataset to indicate the BE To add a package or patch to an inactive BE: Mount the inactive BE Add packages or patches to it Unmount the inactive BE To list the available BEs: Use the "zfs list" command. To destroy a BE: Use the "zfs destroy" command. Preparation Before you can use the new features, you will need a Solaris 10 BZ on a Solaris 11 system. You can use these three steps - on a real Solaris 11.1 server or in a VirtualBox guest running Solaris 11.1 - to create a Solaris 10 BZ. The Solaris 11.1 environment must be at SRU 6.4 or newer. Create a flash archive on the Solaris 10 system s10# flarcreate -n s10-system /net/zones/archives/s10-system.flar Configure the Solaris 10 BZ on the Solaris 11 system s11# zonecfg -z s10z Use 'create' to begin configuring a new zone. zonecfg:s10z create -t SYSsolaris10 zonecfg:s10z set zonepath=/zones/s10z zonecfg:s10z exit s11# zoneadm list -cv ID NAME STATUS PATH BRAND IP 0 global running / solaris shared - s10z configured /zones/s10z solaris10 excl Install the zone from the flash archive s11# zoneadm -z s10z install -a /net/zones/archives/s10-system.flar -p You can find more information about the migration of Solaris 10 environments to Solaris 10 Branded Zones in the documentation. The rest of this blog entry demonstrates the commands you can use to accomplish the aforementioned actions related to BEs. New features in action Note that the demonstration of the commands occurs in the Solaris 10 BZ, as indicated by the shell prompt "s10z# ". Many of these commands can be performed in the global zone instead, if you prefer. If you perform them in the global zone, you must change the ZFS file system names. Create The only complicated action is the creation of a BE. In the Solaris 10 BZ, create a new "boot environment" - a ZFS clone. You can assign any name to the final portion of the clone's name, as long as it meets the requirements for a ZFS file system name. s10z# zfs snapshot rpool/ROOT/zbe-0@snap s10z# zfs clone -o mountpoint=/ -o canmount=noauto rpool/ROOT/zbe-0@snap rpool/ROOT/newBE cannot mount 'rpool/ROOT/newBE' on '/': directory is not empty filesystem successfully created, but not mounted You can safely ignore that message: we already know that / is not empty! We have merely told ZFS that the default mountpoint for the clone is the root directory. List the available BEs and active BE Because each BE is represented by a clone of the rpool/ROOT dataset, listing the BEs is as simple as listing the clones. s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.55G 42.9G 31K legacy rpool/ROOT/zbe-0 1K 42.9G 3.55G / rpool/ROOT/newBE 3.55G 42.9G 3.55G / The output shows that two BEs exist. Their names are "zbe-0" and "newBE". You can tell Solaris that one particular BE should be used when the zone next boots by using a ZFS property. Its name is com.oracle.zones.solaris10:activebe. The value of that property is the name of the clone that contains the BE that should be booted. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local Change the active BE When you want to change the BE that will be booted next time, you can just change the activebe property on the rpool/ROOT dataset. s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe zbe-0 local s10z# zfs set com.oracle.zones.solaris10:activebe=newBE rpool/ROOT s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT NAME PROPERTY VALUE SOURCE rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# shutdown -y -g0 -i6 After the zone has rebooted: s10z# zfs get com.oracle.zones.solaris10:activebe rpool/ROOT rpool/ROOT com.oracle.zones.solaris10:activebe newBE local s10z# zfs mount rpool/ROOT/newBE / rpool/export /export rpool/export/home /export/home rpool /rpool Mount the original BE to see that it's still there. s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# ls /mnt Desktop export platform Documents export.backup.20130607T214951Z proc S10Flar home rpool TT_DB kernel sbin bin lib system boot lost+found tmp cdrom mnt usr dev net var etc opt Patch an inactive BE At this point, you can modify the original BE. If you would prefer to modify the new BE, you can restore the original value to the activebe property and reboot, and then mount the new BE to /mnt (or another empty directory) and modify it. Let's mount the original BE so we can modify it. (The first command is only needed if you haven't already mounted that BE.) s10z# zfs mount -o mountpoint=/mnt rpool/ROOT/zbe-0 s10z# patchadd -R /mnt -M /var/sadm/spool 104945-02 Note that the typical usage will be: Create a BE Mount the new (inactive) BE Use the package and patch tools to update the new BE Unmount the new BE Reboot Delete an inactive BE ZFS clones are children of their parent file systems. In order to destroy the parent, you must first "promote" the child. This reverses the parent-child relationship. (For more information on this, see the documentation.) The original rpool/ROOT file system is the parent of the clones that you create as BEs. In order to destroy an earlier BE that is that parent of other BEs, you must first promote one of the child BEs to be the ZFS parent. Only then can you destroy the original BE. Fortunately, this is easier to do than to explain: s10z# zfs promote rpool/ROOT/newBE s10z# zfs destroy rpool/ROOT/zbe-0 s10z# zfs list -r rpool/ROOT NAME USED AVAIL REFER MOUNTPOINT rpool/ROOT 3.56G 269G 31K legacy rpool/ROOT/newBE 3.56G 269G 3.55G / Documentation This feature is so new, it is not yet described in the Solaris 11 documentation. However, MOS note 1558773.1 offers some details. Conclusion With this new feature, you can add and patch packages to boot environments of a Solaris 10 Branded Zone. This ability improves the manageability of these zones, and makes their use more practical. It also means that you can use the existing P2V tools with earlier Solaris 10 updates, and modify the environments after they become Solaris 10 Branded Zones.

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Outlook 2010 OSC with SharePoint 2010 documentation or help

  - by skypanther

  I'm looking for documentation or help to set up Outlook 2010's social connector to work with SharePoint 2010. I can't find much info other than some MS videos and blogs saying that it's possible. They say "we are already connected to SharePoint, so let's add in the XYZ connector..." but don't tell how they connected to SharePoint. Server A: Win2K8 x64, Exchange 2010 x64, domain controller Server B: Win2K8 x64, domain member, SQL Server 2008 R2, SharePoint 2010 Client: Win 7, domain member, with Office 2010 RTM (most every component installed, including the OSC) I've added my domain users to a group. In SharePoint, I granted that domain group permissions to access the site. As any of the domain users, I can use IE to log on the My Sites pages. From there, I can add lists, blog posts, status updates etc. In Outlook, I can add a SharePoint contact to my Contacts list. But, all I see in the People Pane is emails my users have exchanged. I don't see any of the other SharePoint status updates. When I try to use the "Add this person to a social network" link to connect them with my My Sites, the process fails. It doesn't give any sort of error message that helps me figure out why. Just a "Try Again" button that likewise fails. Any guides, links, suggestions? I'm pretty novice-level with SharePoint but mildly adept with the other technologies.

  Read the article

• Bluehost Emails Getting Blocked

  - by colithium

  A site for my client has the run-of-the-mill "website with users" email pattern. Create an account, get an activation email. Get an email when a subscription is expiring, etc. The site is hosted on Bluehost and currently it uses php's mail() function. There isn't much configuration that is allowed (as far as I know). The trouble is, about a third of these emails disappear into the void. They aren't in spam or junk folders, there's no bounce message, they just cease to exist. I've read about Bluehost email troubles but I can't figure out what my options are for fixing it. These aren't marketing emails, ie they have user-specific information contained within them. I suppose if a solution offers a good templating system that would be fine. What are my options? Excerpt of headers when delivered to a Gmail address: Received-SPF: neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) client-ip=00.000.000.000; DomainKey-Status: good Authentication-Results: mx.google.com; spf=neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) smtp.mail=domain@box###.bluehost.com; domainkeys=pass [email protected]

  Read the article

• Creating a Training Lab on Windows Azure

  - by Michael Stephenson

  Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/06/17/153149.aspxThis week we are preparing for a training course that Alan Smith will be running for the support teams at one of my customers around Windows Azure. In order to facilitate the training lab we have a few prerequisites we need to handle. One of the biggest ones is that although the support team all have MSDN accounts the local desktops they work on are not ideal for running most of the labs as we want to give them some additional developer background training around Azure. Some recent Azure announcements really help us in this area: MSDN software can now be used on Azure VM You don't pay for Azure VM's when they are no longer used  Since the support team only have limited experience of Windows Azure and the organisation also have an Enterprise Agreement we decided it would be best value for money to spin up a training lab in a subscription on the EA and then we can turn the machines off when we are done. At the same time we would be able to spin them back up when the users need to do some additional lab work once the training course is completed. In order to achieve this I wanted to create a powershell script which would setup my training lab. The aim was to create 18 VM's which would be based on a prebuilt template with Visual Studio and the Azure development tools. The script I used is described below The Start & Variables The below text will setup the powershell environment and some variables which I will use elsewhere in the script. It will also import the Azure Powershell cmdlets. You can see below that I will need to download my publisher settings file and know some details from my Azure account. At this point I will assume you have a basic understanding of Azure & Powershell so already know how to do this. Set-ExecutionPolicy Unrestrictedcls $startTime = get-dateImport-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\Azure.psd1"# Azure Publisher Settings $azurePublisherSettings = '<Your settings file>.publishsettings'  # Subscription Details $subscriptionName = "<Your subscription name>" $defaultStorageAccount = "<Your default storage account>"  # Affinity Group Details $affinityGroup = '<Your affinity group>' $dataCenter = 'West Europe' # From Get-AzureLocation  # VM Details $baseVMName = 'TRN' $adminUserName = '<Your admin username>' $password = '<Your admin password>' $size = 'Medium' $vmTemplate = '<The name of your VM template image>' $rdpFilePath = '<File path to save RDP files to>' $machineSettingsPath = '<File path to save machine info to>'    Functions In the next section of the script I have some functions which are used to perform certain actions. The first is called CreateVM. This will do the following actions: If the VM already exists it will be deleted Create the cloud service Create the VM from the template I have created Add an endpoint so we can RDP to them all over the same port Download the RDP file so there is a short cut the trainees can easily access the machine via Write settings for the machine to a log file  function CreateVM($machineNo) { # Specify a name for the new VM $machineName = "$baseVMName-$machineNo" Write-Host "Creating VM: $machineName"       # Get the Azure VM Image      $myImage = Get-AzureVMImage $vmTemplate   #If the VM already exists delete and re-create it $existingVm = Get-AzureVM -Name $machineName -ServiceName $serviceName if($existingVm -ne $null) { Write-Host "VM already exists so deleting it" Remove-AzureVM -Name $machineName -ServiceName $serviceName }   "Creating Service" $serviceName = "bupa-azure-train-$machineName" Remove-AzureService -Force -ServiceName $serviceName New-AzureService -Location $dataCenter -ServiceName $serviceName   Write-Host "Creating VM: $machineName" New-AzureQuickVM -Windows -name $machineName -ServiceName $serviceName -ImageName $myImage.ImageName -InstanceSize $size -AdminUsername $adminUserName -Password $password  Write-Host "Updating the RDP endpoint for $machineName" Get-AzureVM -name $machineName -ServiceName $serviceName ` | Add-AzureEndpoint -Name RDP -Protocol TCP -LocalPort 3389 -PublicPort 550 ` | Update-AzureVM    Write-Host "Get the RDP File for machine $machineName" $machineRDPFilePath = "$rdpFilePath\$machineName.rdp" Get-AzureRemoteDesktopFile -name $machineName -ServiceName $serviceName -LocalPath "$machineRDPFilePath"   WriteMachineSettings "$machineName" "$serviceName" }    The delete machine settings function is used to delete the log file before we start re-running the process.  function DeleteMachineSettings() { Write-Host "Deleting the machine settings output file" [System.IO.File]::Delete("$machineSettingsPath"); }    The write machine settings function will get the VM and then record its details to the log file. The importance of the log file is that I can easily provide the information for all of the VM's to our infrastructure team to be able to configure access to all of the VM's    function WriteMachineSettings([string]$vmName, [string]$vmServiceName) { Write-Host "Writing to the machine settings output file"   $vm = Get-AzureVM -name $vmName -ServiceName $vmServiceName $vmEndpoint = Get-AzureEndpoint -VM $vm -Name RDP   $sb = new-object System.Text.StringBuilder $sb.Append("Service Name: "); $sb.Append($vm.ServiceName); $sb.Append(", "); $sb.Append("VM: "); $sb.Append($vm.Name); $sb.Append(", "); $sb.Append("RDP Public Port: "); $sb.Append($vmEndpoint.Port); $sb.Append(", "); $sb.Append("Public DNS: "); $sb.Append($vmEndpoint.Vip); $sb.AppendLine(""); [System.IO.File]::AppendAllText($machineSettingsPath, $sb.ToString());  } # end functions    Rest of Script In the rest of the script it is really just the bit that orchestrates the actions we want to happen. It will load the publisher settings, select the Azure subscription and then loop around the CreateVM function and create 16 VM's  Import-AzurePublishSettingsFile $azurePublisherSettings Set-AzureSubscription -SubscriptionName $subscriptionName -CurrentStorageAccount $defaultStorageAccount Select-AzureSubscription -SubscriptionName $subscriptionName  DeleteMachineSettings    "Starting creating Bupa International Azure Training Lab" $numberOfVMs = 16  for ($index=1; $index -le $numberOfVMs; $index++) { $vmNo = "$index" CreateVM($vmNo); }    "Finished creating Bupa International Azure Training Lab" # Give it a Minute Start-Sleep -s 60  $endTime = get-date "Script run time " + ($endTime - $startTime)    Conclusion As you can see there is nothing too fancy about this script but in our case of creating a small isolated training lab which is not connected to our corporate network then we can easily use this to provision the lab. Im sure if this is of use to anyone you can easily modify it to do other things with the lab environment too. A couple of points to note are that there are some soft limits in Azure about the number of cores and services your subscription can use. You may need to contact the Azure support team to be able to increase this limit. In terms of the real business value of this approach, it was not possible to use the existing desktops to do the training on, and getting some internal virtual machines would have been relatively expensive and time consuming for our ops team to do. With the Azure option we are able to spin these machines up for a temporary period during the training course and then throw them away when we are done. We expect the costing of this test lab to be very small, especially considering we have EA pricing. As a ball park I think my 18 lab VM training environment will cost in the region of $80 per day on our EA. This is a fraction of the cost of the creation of a single VM on premise.

  Read the article

• Multi-IP address zimbra server DNS PTR records and spam

  - by David Fraser

  We have a mail server running Zimbra (ZCS 6.0.8). The server has 5 active public IP addresses in the same subnet. (.226-.230). I currently have A records for each of these (host0.domain.com..host4.domain.com), with the main host.domain.com of the machine pointing to .226. Our host has ended up being listed on the SORBS DUHL list (even though it's in a server farm). According to them you can get removed quickly by checking that your host has an MX record, an A record, and a PTR record that points back to the hostname given in the MX record. I tried setting the PTR records so that each of these addresses resolved back to their A record (i.e. .228 had a PTR to host2.domain.com). However, I then got mail being rejected from other servers because when Postfix (under Zimbra control) sends out mail, it uses the main hostname for the HELO - there doesn't seem to be any way to override it. So the PTR records currently say host.domain.com for all 5 IP addresses. What's the correct way to handle this? Should I have an A record for the domain that points to all the IP addresses (for round-robin handling)? I'm nervous of changes that could cause problems, so I'm wondering what the standard way to handle a multiple-IP-address mail server is.

  Read the article

• Extract Links from a sitemap(xml)

  - by Akshat Mittal

  Lets say I have a sitemap.xml file with this data: <url> <loc>http://domain.com/pag1</loc> <lastmod>2012-08-25</lastmod> <changefreq>weekly</changefreq> <priority>0.9</priority> </url> <url> <loc>http://domain.com/pag2</loc> <lastmod>2012-08-25</lastmod> <changefreq>weekly</changefreq> <priority>0.9</priority> </url> <url> <loc>http://domain.com/pag3</loc> <lastmod>2012-08-25</lastmod> <changefreq>weekly</changefreq> <priority>0.9</priority> </url> I want to extract all the locations from it (data between <loc> and </loc>). Sample output be like: http://domain.com/pag1 http://domain.com/pag2 http://domain.com/pag3 How to do this?

  Read the article

• Error setting up Blackberry Internet Service with Outlook Web Access

  - by Travis

  I'm trying to set up Blackberry Internet Service to connect to our Windows SBS2003 outlook web access. I've tried every possible combination of credentials by I always get the same error: An error occured during email account validation. Please check your information and try again. If the error persists please contact your System Administrator. The fields are the following: Outlook Web Access URL: http://mail.domain.com/exchange (I've also tried just using the IP address http://000.000.000.000/exchange with no effect). User Name: JohnDoe (same as OWA login / domain username - I've also tried DOMAIN\JohnDoe) Email Address: [email protected] Mailbox Name: This one confused me a little bit, but it seems it should be the same as the domain username (eg. JohnDoe). I've also tried DOMAIN\JohnDoe, and a number of other things. No matter what I do, I get the same error message. At this point, I'm basically just trying things, because I don't really know how this service is supposed to work. Does anyone know what causes this particularly vague error message, and what I can change either in my email settings or on our exchange server to resolve this?

  Read the article

• Email encoding on IIS7

  - by Ivanhoe123

  All emails sent from the server are displaying Cyrillic letters as weird characters, for example: Можно. Regular alphabet letters are properly rendered. I searched all across the web but was not able to find any solutions. Here is some information about the system: Dedicated server with Windows 2008 and IIS7 Application are in PHP (run as FastCGI) If of any importance, Smartermail is installed on the server The emails are sent using PHPs mail() function through a Drupal website. Encoding on that site is set up properly and there are no display issues on front end. Where is the problem? How can I make Cyrillic letters to be properly encoded? Any help is greatly appreciated. Thanks! UPDATE Here are the email headers: Received: from SERVERNAME (mail.domain.com [12.123.123.123]) by mail.domain.com with SMTP; Fri, 16 Nov 2012 00:00:00 +0100 From: [email protected] To: [email protected] Subject: Email subject Date: Fri, 16 Nov 2012 00:00:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable X-Mailer: Drupal Sender: [email protected] Return-Path: [email protected] Message-ID: f98b801988c642ef911ef46f7cace92b@com X-SmarterMail-Spam: SPF_None, ISpamAssassin 8 [raw: 5], DK_None, DKIM_None, Custom Rules [] X-SmarterMail-TotalSpamWeight: 8

  Read the article

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you!

  Read the article

• Cannot establish XMPP server-to-server connection to gmail

  - by v_2e

  My jabber-server fails to connect to gmail.com giving the error: outgoing s2s stream myserver.com.ua-bot.talk.google.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) I am using the Prosody XMPP server. It works just fine with other jabber-servers I tested so far (e.g. jabber.ru). However, when some of my clients tries to add a gmail contact to his contact-list, the subscription request lasts forever, and the Prosody gives the following sequence of messages in its log: Oct 21 22:57:16 s2sout95897f8 info Beginning new connection attempt to gmail.com ([173.194.70.125]:5269) Oct 21 22:57:16 s2sout95897f8 info sent dialback key on outgoing s2s stream Oct 21 22:57:16 s2sout95897f8 info Session closed by remote with error: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info outgoing s2s stream myserver.com.ua->gmail.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info sending error replies for 2 queued stanzas because of failed outgoing connection to gmail.com Here for the domain name of my server I use myserver.com.ua I found a similar problem described in this thread, but there is no detailed description of the solution there. As for the Google services, I did have a google account where I added the domain name under question to the Webmasters tools page. However, I deleted my account long ago, so now it is unclear, how any of the Google services can relate to my domain name. So my question is: What is the real cause of this problem (my jabber-server configuration or imaginary Google account or something else) and how can I make my Prosody server connect to gmail.com jabber service?

  Read the article

• Fun with Aggregates

  - by Paul White

  There are interesting things to be learned from even the simplest queries.  For example, imagine you are given the task of writing a query to list AdventureWorks product names where the product has at least one entry in the transaction history table, but fewer than ten. One possible query to meet that specification is: SELECT p.Name FROM Production.Product AS p JOIN Production.TransactionHistory AS th ON p.ProductID = th.ProductID GROUP BY p.ProductID, p.Name HAVING COUNT_BIG(*) < 10; That query correctly returns 23 rows (execution plan and data sample shown below): The execution plan looks a bit different from the written form of the query: the base tables are accessed in reverse order, and the aggregation is performed before the join.  The general idea is to read all rows from the history table, compute the count of rows grouped by ProductID, merge join the results to the Product table on ProductID, and finally filter to only return rows where the count is less than ten. This ‘fully-optimized’ plan has an estimated cost of around 0.33 units.  The reason for the quote marks there is that this plan is not quite as optimal as it could be – surely it would make sense to push the Filter down past the join too?  To answer that, let’s look at some other ways to formulate this query.  This being SQL, there are any number of ways to write logically-equivalent query specifications, so we’ll just look at a couple of interesting ones.  The first query is an attempt to reverse-engineer T-SQL from the optimized query plan shown above.  It joins the result of pre-aggregating the history table to the Product table before filtering: SELECT p.Name FROM ( SELECT th.ProductID, cnt = COUNT_BIG(*) FROM Production.TransactionHistory AS th GROUP BY th.ProductID ) AS q1 JOIN Production.Product AS p ON p.ProductID = q1.ProductID WHERE q1.cnt < 10; Perhaps a little surprisingly, we get a slightly different execution plan: The results are the same (23 rows) but this time the Filter is pushed below the join!  The optimizer chooses nested loops for the join, because the cardinality estimate for rows passing the Filter is a bit low (estimate 1 versus 23 actual), though you can force a merge join with a hint and the Filter still appears below the join.  In yet another variation, the < 10 predicate can be ‘manually pushed’ by specifying it in a HAVING clause in the “q1” sub-query instead of in the WHERE clause as written above. The reason this predicate can be pushed past the join in this query form, but not in the original formulation is simply an optimizer limitation – it does make efforts (primarily during the simplification phase) to encourage logically-equivalent query specifications to produce the same execution plan, but the implementation is not completely comprehensive. Moving on to a second example, the following query specification results from phrasing the requirement as “list the products where there exists fewer than ten correlated rows in the history table”: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID HAVING COUNT_BIG(*) < 10 ); Unfortunately, this query produces an incorrect result (86 rows): The problem is that it lists products with no history rows, though the reasons are interesting.  The COUNT_BIG(*) in the EXISTS clause is a scalar aggregate (meaning there is no GROUP BY clause) and scalar aggregates always produce a value, even when the input is an empty set.  In the case of the COUNT aggregate, the result of aggregating the empty set is zero (the other standard aggregates produce a NULL).  To make the point really clear, let’s look at product 709, which happens to be one for which no history rows exist: -- Scalar aggregate SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = 709;   -- Vector aggregate SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = 709 GROUP BY th.ProductID; The estimated execution plans for these two statements are almost identical: You might expect the Stream Aggregate to have a Group By for the second statement, but this is not the case.  The query includes an equality comparison to a constant value (709), so all qualified rows are guaranteed to have the same value for ProductID and the Group By is optimized away. In fact there are some minor differences between the two plans (the first is auto-parameterized and qualifies for trivial plan, whereas the second is not auto-parameterized and requires cost-based optimization), but there is nothing to indicate that one is a scalar aggregate and the other is a vector aggregate.  This is something I would like to see exposed in show plan so I suggested it on Connect.  Anyway, the results of running the two queries show the difference at runtime: The scalar aggregate (no GROUP BY) returns a result of zero, whereas the vector aggregate (with a GROUP BY clause) returns nothing at all.  Returning to our EXISTS query, we could ‘fix’ it by changing the HAVING clause to reject rows where the scalar aggregate returns zero: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID HAVING COUNT_BIG(*) BETWEEN 1 AND 9 ); The query now returns the correct 23 rows: Unfortunately, the execution plan is less efficient now – it has an estimated cost of 0.78 compared to 0.33 for the earlier plans.  Let’s try adding a redundant GROUP BY instead of changing the HAVING clause: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY th.ProductID HAVING COUNT_BIG(*) < 10 ); Not only do we now get correct results (23 rows), this is the execution plan: I like to compare that plan to quantum physics: if you don’t find it shocking, you haven’t understood it properly :)  The simple addition of a redundant GROUP BY has resulted in the EXISTS form of the query being transformed into exactly the same optimal plan we found earlier.  What’s more, in SQL Server 2008 and later, we can replace the odd-looking GROUP BY with an explicit GROUP BY on the empty set: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () HAVING COUNT_BIG(*) < 10 ); I offer that as an alternative because some people find it more intuitive (and it perhaps has more geek value too).  Whichever way you prefer, it’s rather satisfying to note that the result of the sub-query does not exist for a particular correlated value where a vector aggregate is used (the scalar COUNT aggregate always returns a value, even if zero, so it always ‘EXISTS’ regardless which ProductID is logically being evaluated). The following query forms also produce the optimal plan and correct results, so long as a vector aggregate is used (you can probably find more equivalent query forms): WHERE Clause SELECT p.Name FROM Production.Product AS p WHERE ( SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () ) < 10; APPLY SELECT p.Name FROM Production.Product AS p CROSS APPLY ( SELECT NULL FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () HAVING COUNT_BIG(*) < 10 ) AS ca (dummy); FROM Clause SELECT q1.Name FROM ( SELECT p.Name, cnt = ( SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () ) FROM Production.Product AS p ) AS q1 WHERE q1.cnt < 10; This last example uses SUM(1) instead of COUNT and does not require a vector aggregate…you should be able to work out why :) SELECT q.Name FROM ( SELECT p.Name, cnt = ( SELECT SUM(1) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID ) FROM Production.Product AS p ) AS q WHERE q.cnt < 10; The semantics of SQL aggregates are rather odd in places.  It definitely pays to get to know the rules, and to be careful to check whether your queries are using scalar or vector aggregates.  As we have seen, query plans do not show in which ‘mode’ an aggregate is running and getting it wrong can cause poor performance, wrong results, or both. © 2012 Paul White Twitter: @SQL_Kiwi email: [email protected]

  Read the article

• How to set up the jdbc driver to connect to hsqldb from libreoffice?

  - by rumtscho

  I am trying to "split" a LibreOffice .odb file into a HSQL database and an OpenOffice document containing forms and macros. I am trying to follow the instructions from this thread: Within a few minutes you can convert your embedded HSQLDB to a stand-alone HSQLDB which is just a very fine database engine. 1) Download and extract the current version from http://hsqldb.org/ and point the Java class path in ToolsOptionsJava to the new hsqldb.jar 2) Extract the database folder from your embedded database and rename the files data, properties, script to name.data name.properties, name.script where "name." is an arbitrary name prefix. 3) Connect a Base document to an existing JDBC database such as jdbc:hsqldb:file:/home/chenier/hsqldb/name;default_schema=true;shutdown=true;hsqldb.default_table_type=cached;get_column_name=false (again, "name" refers to your own file name prefix). This local single-user connection gives you much more than the embedded HSQLDB. 4) Copy queries, forms and reports from the old database over to the new one. The wizard presents me with a window expecting two inputs: a "Datasource URL" and a "JDBC driver class". As far as I can tell, the tutorial above only tells me what to put into the Datasource URL. As for the JDBC driver class, I have no idea what to write into this field. I tried the fully-qualified name of the Java class, org.hsqldb.jdbc.JDBCDriver as given in the HSQLDB documentation. When that failed, I tried the physical path /var/lib/hsqldb/lib/hsqldb.jar (although that should have been unnecessary, because first I pointed to this path as described under 1 and then restarted LibreOffice). In both cases, "Test class" failed with the message "The JDBC driver could not be loaded". OpenOffice's documentation doesn't say anything sensible about the field, it was something like "enter the JDBC driver in this box". Any ideas what I should enter there to get the connection working?

  Read the article

• Setup Exchange 2010 cannot verify Host (A) record warning

  - by Joost Verdaasdonk

  When I try to install Exchange 2010 on my server 2008 R2 server I get a warning during the prerequisites check: Warning: setup cannot verify that the 'Host' (A) record for this computer exists within the DNS database on server: 90.195.200.12. The goal of this Exchange setup is that I'm able to sent email in my local domain as well receive/sent email through the public domain name. Some information about my setup This Server is going to be a dedicated exchange host and has the following IP setup: (IP's are examples and not the real IP's ofc) Local VLAN NIC: IP: 10.10.50.22 Subnet: 255.255.255.0 No gateway DNS: 10.10.50.1 (is domain controler with authoritive DNS) public WAN NIC: IP: 90.195.200.148 Subnet: 255.255.255.235 Gateway: 90.195.200.145 DNS: 90.195.200.12 | 190.160.230.14 My public domain - exampledomain.com A record: mail - IP: 90.195.200.148 MX record IP: 90.195.200.148 As I'm seeing now the exchange setup is looking for the A record in one of the DNS servers in my Public WAN NIC. And ofc this is not where my A records are defined. I have those A records in 2 places: 1. In the domain controler DNS (the private nic) 2. In the online dns registration of my public domain (exampledomain.com) My question is... is this warning going to be a problem? Can I do something better in my setup so that this warning will go away? Please advice?

  Read the article

• Cannot establish XMPP server-to-server connection with gmail

  - by v_2e

  My jabber-server fails to connect to gmail.com giving the error: outgoing s2s stream myserver.com.ua-bot.talk.google.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) I am using the Prosody XMPP server. It works just fine with other jabber-servers I tested so far (e.g. jabber.ru). However, when some of my clients tries to add a gmail contact to his contact-list, the subscription request lasts forever, and the Prosody gives the following sequence of messages in its log: Oct 21 22:57:16 s2sout95897f8 info Beginning new connection attempt to gmail.com ([173.194.70.125]:5269) Oct 21 22:57:16 s2sout95897f8 info sent dialback key on outgoing s2s stream Oct 21 22:57:16 s2sout95897f8 info Session closed by remote with error: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info outgoing s2s stream myserver.com.ua->gmail.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info sending error replies for 2 queued stanzas because of failed outgoing connection to gmail.com Here for the domain name of my server I use myserver.com.ua I found a similar problem described in this thread, but there is no detailed description of the solution there. As for the Google services, I did have a google account where I added the domain name under question to the Webmasters tools page. However, I deleted my account long ago, so now it is unclear, how any of the Google services can relate to my domain name. So my question is: What is the real cause of this problem (my jabber-server configuration or imaginary Google account or something else) and how can I make my Prosody server connect to gmail.com jabber service?

  Read the article

• Why would one of my servers stop being able to access other servers by FQDN?

  - by Newlyn Erratt

  I have a number of servers on our local network and our debian server has suddenly stopped being able to access the other servers via their FQDN. Initial symptom was inability to login with Active Directory accounts. On further inspection, this machine, porkbelly, was unable to access our other servers (e.g. bacon and albert) via their FQDN. That is, they can ping albert by running ping albert but not by running ping albert.domain.local though when running ping albert it will be expanded to albert.domain.local. The server is still accessible from other servers via both porkbelly and porkbelly.domain.local. Upon examination of hosts information and running hostname its hostname and FQDN are correct. The resolv.conf appears correct. It contains: domain domain.local search domain.local nameserver 192.168.0.xxx (the nameserver) The dns server is also our Windows AD server. I'm not even sure where to go from here or why dns seems to be partially working though I don't have much experience. Where should I go from here? What might be causing this issue where machines are visible via their hostname but not their FQDN?

  Read the article

• Require and Includes not Functioning Nginx Fpm/FastCGI

  - by Vince Kronlein

  I've split up my FPM pools so that php will run under each individual user and set the routing correctly in my vhost.conf files to pass the proper port number. But I must have something incorrect in my environment because on this new domain I set up, require, require_once, include, include_once do not function, or rather, they may not be getting passed up to the interpreter to be rendered as php. Since I already have a Wordpress install on this server that runs perfectly, I'm pretty sure the error is in my server block for nginx. server { server_name www.domain.com; rewrite ^(.*) http://domain.com$1 permanent; } server { listen 80; server_name domain.com; client_max_body_size 500M; index index.php index.html index.htm; root /home/username/public_html; location / { try_files $uri $uri/ index.php; } location ~ \.php$ { if (!-e $request_filename) { rewrite ^(.*)$ /index.php?name=$1 break; } fastcgi_pass 127.0.0.1:9002; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location ~ /\.ht { deny all; } } The problem I'm finding I think is that there are dynamic calls to the doc root index file, while all calls to anything within a sub-folder should be routed as normal ie: NOT passed to index.php. I can't seem to find the right mix here. It should run like so: domain.com/cindy (file doesn't exist) --> index.php?name=$1 domain.com/admin/anyfile.php (files DO exist) --> admin/anyfile.php?$args

  Read the article

• Virtualmin: Automatically create SSL based website with a shared SSL wildcard cert?

  - by Josh

  I managed to configure this very nicely under cPanel/WHM, but I am having trouble configuring it under Virtualmin: when I create a new Virtual Server in Virtualmin, I want it to automatically create an Apache with a subdomain of a shared wildcard SSL domain. So for example, if I create a virtual server for some.example.com, I want two VirtualHosts: <VirtualHost 1.2.3.4:80> ServerName some.example.com ServerAlias www.some.example.com some_example.shared-ssl-domain.com ... </VirtualHost> <VirtualHost 1.2.3.4:443> ServerName some_example.shared-ssl-domain.com ... SSLEngine on SSLCertificateFile /path/to/shared-ssl-domain.com.crt SSLCertificateKeyFile //path/to/shared-ssl-domain.com.key SSLCACertificateFile /path/to/shared-ssl-domain.com.cabundle </VirtualHost> in cPanel/WHM I was able to do this easily because the template file contained the <VirtualHost> and </VirtualHost> directives. But Virtualmin's template does now. is there any way I can set up Virtualmin to do what I want?

  Read the article

• EFS Remote Encryption

  - by Apoulet

  We have been trying to setup EFS across our domain. Unfortunately Reading/Writing file over network share does not work, we get an "Access Denied" error. Another worrying fact is that I managed to get it working for 1 machine but no other would work. The machines are all Windows 2008R2, running as VM under ESXi host. According to: http://technet.microsoft.com/en-us/library/bb457116.aspx#EHAA We setup the involved machine to be trusted for delegation The user are not restricted and can be trusted for delegation. The users have logged-in on both side and can read/write encrypted files without issues locally. I enabled Kerberos logging in the registry and this is the relevant logs that I get on the machine that has the encrypted files. In order for all certificate that the user possess (Only Key Name changes): Event ID 5058: Audit Success, "Other System Events" Key file operation. Subject: Security ID: {MyDOMAIN}\{MyID} Account Name: {MyID} Account Domain: {MyDOMAIN} Logon ID: 0xbXXXXXXX Cryptographic Parameters: Provider Name: Microsoft Software Key Storage Provider Algorithm Name: Not Available. Key Name: {CE885431-9B4F-47C2-8415-2D766B999999} Key Type: User key. Key File Operation Information: File Path: C:\Users\{MyID}\AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-21-4585646465656-260371901-2912106767-1207\66099999999991e891f187e791277da03d_dfe9ecd8-31c4-4b0f-9b57-6fd3cab90760 Operation: Read persisted key from file. Return Code: 0x0[/code] Event ID 5061: Audit Faillure, "System Intergrity" [code]Cryptographic operation. Subject: Security ID: {MyDOMAIN}\{MyID} Account Name: {MyID} Account Domain: {MyDOMAIN} Logon ID: 0xbXXXXXXX Cryptographic Parameters: Provider Name: Microsoft Software Key Storage Provider Algorithm Name: RSA Key Name: {CE885431-9B4F-47C2-8415-2D766B999999} Key Type: User key. Cryptographic Operation: Operation: Open Key. Return Code: 0x8009000b Could this be related to this error from the CryptAcquireContext function NTE_BAD_KEY_STATE 0x8009000BL The user password has changed since the private keys were encrypted. The problem is that the users I using at the moment can not change their password.

  Read the article

• OpenLDAP ACLs are not working

  - by Dr I

  First things first, I'm currently working with an OpenLDAP: slapd 2.4.36 on a Fedora release 19 (Schrödinger’s Cat). I've just install the openldap with yum and my configuration is the following one: ##### OpenLDAP Default configuration ##### # ##### OpenLDAP CORE CONFIGURATION ##### include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/nis.schema pidfile /var/lib/ldap/slapd.pid loglevel trace ##### Default Schema ##### database mdb directory /var/lib/ldap/ maxsize 1073741824 suffix "dc=domain,dc=tld" rootdn "cn=root,dc=domain,dc=tld" rootpw {SSHA}SECRETP@SSWORD ##### Default ACL ##### access to attrs=userpassword by self write by group.exact="cn=administrators,ou=builtin,ou=groups,dc=domain,dc=tld" write by anonymous auth by * none I launch my OpenLDAP service using: /usr/sbin/slapd -u ldap -h ldapi:/// ldap:/// -f /etc/openldap/slapd.conf As you can see it's a pretty simple ACL which aim to allow access to the userPassword attribute to a specific group read only, then to the owner read and write to anonymous requiring auth and refuse the access to everyone else. The problem is: Even using a valid user with correct password my ldapsearch ends with zero informations retrieved from the directory, plus I've got a strange response on the result line. # search result search: 2 result: 32 No such object # numResponses: 1 here is the ldapsearch request: ldapsearch -H ldap.domain.tld -W -b dc=domain,dc=tld -s sub -D cn=user,ou=service,ou=employees,ou=users,dc=domain,dc=tld I did not specify any filter as I want to check that ldapsearch is correctly printing only allowed attribute.

  Read the article

• Powershell script to delete secondary SMTP addresses of Exchange 2010 Mail Contacts

  - by Zero Subnet

  I have a few thousand Exchange 2010 Mail Contacts who get erroneously assigned internal SMTP addresses by the default recipient policy. I'm trying to use the following command to delete these addresses (keeping the primary SMTP) and disabling the automatic update from recipient policy so the SMTP addresses don't get recreated again. Get-MailContact -OrganizationalUnit "domain.local/OU" -Filter {EmailAddresses -like *@domain.local -and name -notlike "ExchangeUM*"} -ResultSize unlimited -IgnoreDefaultScope | foreach {$contact = $_; $email = $contact.emailaddresses; $email | foreach {if ($_.smtpaddress -like *@domain.local) {$address = $_.smtpaddress; write-host "Removing address" $address "from Contact" $contact.name; Set-Mailcontact -Identity $contact.identity -EmailAddresses @{Remove=$address}; $contact | set-mailcontact -emailaddresspolicyenabled $false} }} I'm getting the following error though: You must provide a value expression on the right-hand side of the '-like' operator. At line:1 char:312 + Get-MailContact -OrganizationalUnit "domain.local/testou" -Filter {EmailAddresses -like "@domain.local" -and name -notlike "ExchangeUM"} -ResultSize unlimited -IgnoreDefaultScope | foreach {$contact = $; $ email = $contact.emailaddresses; $email | foreach {if ($.smtpaddress -like <<<< *@domain.local) {$address = $_.smt paddress; write-host "Removing address" $address "from Contact" $contact.name; Set-Mailcontact -Identity $contact.ident ity -EmailAddresses @{Remove=$address}; $contact }} + CategoryInfo : ParserError: (:) [], ParentContainsErrorRecordException + FullyQualifiedErrorId : ExpectedValueExpression Any help as to how to fix this?

  Read the article

• How can I avoid permission denied errors when attempting to deploy a rails app with capistrano?

  - by joshee

  Total noob here. I'm attempting to deploy an app through Capistrano. I'm getting relentless permission denied errors when I attempt to run cap deploy:update. Seemingly at least some of these errors are due to missing directories that trigger a "Permission Denied" error. (I'm doing setup on root just temporarily.) set :user, 'root' set :domain, 'domainname.com' set :application, 'appname' # adjust if you are using RVM, remove if you are not $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require "rvm/capistrano" set :rvm_ruby_string, '1.9.2' # file paths set :repository, "ssh://[email protected]/~/git/appname.git" set :deploy_to, "/var/rails/appname" # distribute your applications across servers (the instructions below put them # all on the same server, defined above as 'domain', adjust as necessary) role :app, domain role :web, domain role :db, domain, :primary => true set :deploy_via, :remote_cache set :scm, 'git' set :branch, 'master' set :scm_verbose, true set :use_sudo, false set :rails_env, :production namespace :deploy do desc "cause Passenger to initiate a restart" task :restart do run "touch #{current_path}/tmp/restart.txt" end desc "reload the database with seed data" task :seed do run "cd #{current_path}; rake db:seed RAILS_ENV=#{rails_env}" end end after "deploy:update_code", :bundle_install desc "install the necessary prerequisites" task :bundle_install, :roles => :app do run "cd #{release_path} && bundle install" end Here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/shared/cached-copy'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly I'm able to ssh without a password, so not sure about that publickey error. By the way, if I run cap deploy:update without set :deploy_via, :remote_cache, here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/releases/20120326204237'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly command finished Thanks a lot for your help with this.

  Read the article

• no A record show in the answer section in dig results

  - by eric low

  To check the record for the domain, run dig with domain name as the parameter. dig example.com any I get the below result. Why there is no A record show in the result. What did i do wrong during the setup. Please advice what suppose to look into it. Hope everyone can help me to resolve the case asap. ; <<>> DiG 9.9.3-P2 <<>> example.com any ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44674 ;; flags: qr rd ra; QUERY: 1, ANSWER: 8, AUTHORITY: 4, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;example.com. IN ANY ;; ANSWER SECTION: example.com. 3489 IN MX 100 biz.mail.com. example.com. 3482 IN NS ns1.domain.com. example.com. 3482 IN NS ns2.domain.com. ;; AUTHORITY SECTION: example.com. 3482 IN NS ns2.domain.com. example.com. 3482 IN NS ns1.domain.com. ;; Query time: 0 msec ;; SERVER: xxx.252.xxx.xxx#53(xxx.252.xxx.xxx) ;; WHEN: Wed Oct 30 04:48:34 CDT 2013 ;; MSG SIZE rcvd: 349

  Read the article

• Is there a faster way to change default apps associated with file types on OS X?

  - by Lri

  Is there anything more convenient than using RCDefaultApp or Magic Launch, or just repeatedly pressing the Change All buttons in Finder's information panels? I thought about writing a shell script that would modify the CFBundleDocumentTypes arrays in Info.plist files. But each app has multiple keys (sometimes an icon) that would need to be changed. lsregister can't be used to make specific modifications to the Launch Services database. $ `locate lsregister` -h lsregister: [OPTIONS] [ <path>... ] [ -apps <domain>[,domain]... ] [ -libs <domain>[,domain]... ] [ -all <domain>[,domain]... ] Paths are searched for applications to register with the Launch Service database. Valid domains are "system", "local", "network" and "user". Domains can also be specified using only the first letter. -kill Reset the Launch Services database before doing anything else -seed If database isn't seeded, scan default locations for applications and libraries to register -lint Print information about plist errors while registering bundles -convert Register apps found in older LS database files -lazy n Sleep for n seconds before registering/scanning -r Recursive directory scan, do not recurse into packages or invisible directories -R Recursive directory scan, descending into packages and invisible directories -f force-update registration even if mod date is unchanged -u unregister instead of register -v Display progress information -dump Display full database contents after registration -h Display this help

  Read the article

• do I need to create an AD site for VPN network

  - by ykyri

  I have Windows Domain level 2008 R2. There are four GC DC in four different physical locations. I have Kerio-based VPN network for replication and remote administration. Here is how network configured: dc1: local IP: 192.168.0.10 VPN IP: 192.168.1.10 dc2: local IP: 10.10.8.11 VPN IP: 192.168.1.11 dc3: local IP: 10.10.9.12 VPN IP: 192.168.1.12 dc4: local IP: 10.10.10.13 VPN IP: 192.168.1.13 That's simple, replication and all works fine but when running dcdiag on dc3 I have an error: A warning event occurred. EventID: 0x000016AF During the past 4.12 hours there have been 216 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. <...> The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text 'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. Here is netlogon.log lines example: 05/30 12:07:39 DOMAIN.NAME: NO_CLIENT_SITE: dc2 192.168.1.11 05/31 09:52:11 DOMAIN.NAME: NO_CLIENT_SITE: dc4 192.168.1.13 05/31 19:49:31 DOMAIN.NAME: NO_CLIENT_SITE: adm-note 192.168.1.101 07/01 05:16:26 DOMAIN.NAME: NO_CLIENT_SITE: dc1 192.168.1.10 All VPN-joined computers are generates same log line as above. Computer amd-note is for example administrator's notebook, also have VPN. Question is should I add new AD site and bind VPN subnet 192.168.1.0/24 with that site?

  Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >