generic relationship - Page 292

How do I install on an UEFI Asus 1215b netbook?

- by Tarek

I'm trying to install Ubuntu 11.10 on a UEFI netbook Asus 1215b using an USB stick. I created a fat32 efi partition of 100MB, 2GB swap, and 2 ext4 partitions (for root (/ ) and /home, respectively). While installing, Ubuntu switches to CLI and starts running efibootmgr. After a few commands (sadly I don't have a screen grab), it stops displaying text but it's still running judging by the HDD led. Then, there's a weird graphic glitch and the screen turns off (HDD led still indicating activity). Finally, it just stops, but doesn't turn off. Not even a hard reboot works (holding down the power button a few secs). I have to plug the netbook off and remove the battery. After that, it still doesn't boot Ubuntu... Anyway, what can I do? I'm considering following the footsteps here and here. Edit: here is the syslog $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] BUG: unable to handle kernel paging request at 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] IP: [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] PGD 14ecc067 PUD 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Oops: 0000 [#1] SMP $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CPU 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Modules linked in: cryptd aes_x86_64 ufs qnx4 hfsplus hfs minix ntfs msdos xfs reiserfs jfs bnep parport_pc rfcomm dm_crypt ppdev bluetooth lp parport joydev eeepc_wmi asus_wmi sparse_keymap uvcvideo videodev v4l2_compat_ioctl32 snd_hda_codec_realtek snd_seq_midi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec arc4 snd_rawmidi snd_hwdep psmouse snd_pcm snd_seq_midi_event ath9k serio_raw sp5100_tco i2c_piix4 k10temp snd_seq mac80211 snd_timer ath9k_common ath9k_hw snd_seq_device ath snd cfg80211 soundcore snd_page_alloc binfmt_misc squashfs overlayfs nls_iso8859_1 nls_cp437 vfat fat dm_raid45 xor dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c usb_storage uas radeon video ahci libahci ttm drm_kms_helper drm wmi i2c_algo_bit atl1c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Pid: 28432, comm: efibootmgr Not tainted 3.0.0-12-generic #20-Ubuntu ASUSTeK Computer INC. 1215B/1215B $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP: 0010:[<ffff880066d44c1f>] [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP: 0018:ffff88005e2cbab0 EFLAGS: 00010082 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RAX: 00000000ffe1867c RBX: 0000000000000009 RCX: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RDX: 0000000000000000 RSI: ffff88005e2cbbea RDI: ffff88005e2cbb40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RBP: 00000000ffe1867c R08: 0000000000000000 R09: 0000000000000084 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R10: ffffc9001101ff83 R11: ffffc90011018685 R12: 0000000000000001 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R13: 0000000000000000 R14: ffffc9001101867c R15: ffff88005e2cbbe1 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] FS: 00007f9cdde13720(0000) GS:ffff880066a00000(0000) knlGS:0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c CR3: 000000002dace000 CR4: 00000000000006f0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Process efibootmgr (pid: 28432, threadinfo ffff88005e2ca000, task ffff880014f0dc80) $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Stack: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc90011010000 ffff88005e2cbac8 0000000000010000 ffff880066d4401d $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] 000000000000007c ffff880009e84400 0000000000000090 ffff880066d45738 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc9001101867c ffff880066d4331c 0000000000000009 ffffc9001101867b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Call Trace: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9c2d>] ? open+0x10d/0x1b0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8116554b>] ? __dentry_open+0x2bb/0x320 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9b20>] ? bin_vma_open+0x70/0x70 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811849ee>] ? vfsmount_lock_local_unlock+0x1e/0x30 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8104303b>] ? efi_call5+0x4b/0x80 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81042a7f>] ? virt_efi_set_variable+0x2f/0x40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff814bb125>] ? efivar_create+0x1e5/0x280 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9d63>] ? write+0x93/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9de4>] ? write+0x114/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167813>] ? vfs_write+0xb3/0x180 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167b3a>] ? sys_write+0x4a/0x90 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815f22c2>] ? system_call_fastpath+0x16/0x1b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Code: ec 01 75 f0 41 bc 01 00 00 00 e8 e5 fb ff ff e8 e4 fc ff ff 33 c0 44 0f b7 c0 66 3b c3 73 20 41 0f b7 c0 41 0f b7 d0 03 c5 8b c8 <8a> 00 42 38 04 3a 75 0a 66 45 03 c4 66 44 3b c3 72 e2 33 c0 66 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP <ffff88005e2cbab0> $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ---[ end trace 493844b002da4787 ]---

Read the article

Need help with testdisk output

- by dan

I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

Read the article

6 Facts About GlassFish Announcement

- by Bruno.Borges

Since Oracle announced the end of commercial support for future Oracle GlassFish Server versions, the Java EE world has started wondering what will happen to GlassFish Server Open Source Edition. Unfortunately, there's a lot of misleading information going around. So let me clarify some things with facts, not FUD. Fact #1 - GlassFish Open Source Edition is not dead GlassFish Server Open Source Edition will remain the reference implementation of Java EE. The current trunk is where an implementation for Java EE 8 will flourish, and this will become the future GlassFish 5.0. Calling "GlassFish is dead" does no good to the Java EE ecosystem. The GlassFish Community will remain strong towards the future of Java EE. Without revenue-focused mind, this might actually help the GlassFish community to shape the next version, and set free from any ties with commercial decisions. Fact #2 - OGS support is not over As I said before, GlassFish Server Open Source Edition will continue. Main change is that there will be no more future commercial releases of Oracle GlassFish Server. New and existing OGS 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. In parallel, I believe there's no other company in the Java EE business that offers commercial support to more than one build of a Java EE application server. This new direction can actually help customers and partners, simplifying decision through commercial negotiations. Fact #3 - WebLogic is not always more expensive than OGS Oracle GlassFish Server ("OGS") is a build of GlassFish Server Open Source Edition bundled with a set of commercial features called GlassFish Server Control and license bundles such as Java SE Support. OGS has at the moment of this writing the pricelist of U$ 5,000 / processor. One information that some bloggers are mentioning is that WebLogic is more expensive than this. Fact 3.1: it is not necessarily the case. The initial edition of WebLogic is called "Standard Edition" and falls into a policy where some “Standard Edition” products are licensed on a per socket basis. As of current pricelist, US$ 10,000 / socket. If you do the math, you will realize that WebLogic SE can actually be significantly more cost effective than OGS, and a customer can save money if running on a CPU with 4 cores or more for example. Quote from the price list: “When licensing Oracle programs with Standard Edition One or Standard Edition in the product name (with the exception of Java SE Support, Java SE Advanced, and Java SE Suite), a processor is counted equivalent to an occupied socket; however, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.” For more details speak to your Oracle sales representative - this is clearly at list price and every customer typically has a relationship with Oracle (like they do with other vendors) and different contractual details may apply. And although OGS has always been production-ready for Java EE applications, it is no secret that WebLogic has always been more enterprise, mission critical application server than OGS since BEA. Different editions of WLS provide features and upgrade irons like the WebLogic Diagnostic Framework, Work Managers, Side by Side Deployment, ADF and TopLink bundled license, Web Tier (Oracle HTTP Server) bundled licensed, Fusion Middleware stack support, Oracle DB integration features, Oracle RAC features (such as GridLink), Coherence Management capabilities, Advanced HA (Whole Service Migration and Server Migration), Java Mission Control, Flight Recorder, Oracle JDK support, etc. Fact #4 - There’s no major vendor supporting community builds of Java EE app servers There are no major vendors providing support for community builds of any Open Source application server. For example, IBM used to provide community support for builds of Apache Geronimo, not anymore. Red Hat does not commercially support builds of WildFly and if I remember correctly, never supported community builds of former JBoss AS. Oracle has never commercially supported GlassFish Server Open Source Edition builds. Tomitribe appears to be the exception to the rule, offering commercial support for Apache TomEE. Fact #5 - WebLogic and GlassFish share several Java EE implementations It has been no secret that although GlassFish and WebLogic share some JSR implementations (as stated in the The Aquarium announcement: JPA, JSF, WebSockets, CDI, Bean Validation, JAX-WS, JAXB, and WS-AT) and WebLogic understands GlassFish deployment descriptors, they are not from the same codebase. Fact #6 - WebLogic is not for GlassFish what JBoss EAP is for WildFly WebLogic is closed-source offering. It is commercialized through a license-based plus support fee model. OGS although from an Open Source code, has had the same commercial model as WebLogic. Still, one cannot compare GlassFish/WebLogic to WildFly/JBoss EAP. It is simply not the same case, since Oracle has had two different products from different codebases. The comparison should be limited to GlassFish Open Source / Oracle GlassFish Server versus WildFly / JBoss EAP. But the message now is much clear: Oracle will commercially support only the proprietary product WebLogic, and invest on GlassFish Server Open Source Edition as the reference implementation for the Java EE platform and future Java EE 8, as a developer-friendly community distribution, and encourages community participation through Adopt a JSR and contributions to GlassFish. In comparison Oracle's decision has pretty much the same goal as to when IBM killed support for Websphere Community Edition; and to when Red Hat decided to change the name of JBoss Community Edition to WildFly, simplifying and clarifying marketing message and leaving the commercial field wide open to JBoss EAP only. Oracle can now, as any other vendor has already been doing, focus on only one commercial offer. Some users are saying they will now move to WildFly, but it is important to note that Red Hat does not offer commercial support for WildFly builds. Although the future JBoss EAP versions will come from the same codebase as WildFly, the builds will definitely not be the same, nor sharing 100% of their functionalities and bug fixes. This means there will be no company running a WildFly build in production with support from Red Hat. This discussion has also raised an important and interesting information: Oracle offers a free for developers OTN License for WebLogic. For other environments this is different, but please note this is the same policy Red Hat applies to JBoss EAP, as stated in their download page and terms. Oracle had the same policy for OGS. TL;DR; GlassFish Server Open Source Edition isn’t dead. Current and new OGS 2.x/3.x customers will continue to have support (respecting LSP). WebLogic is not necessarily more expensive than OGS. Oracle will focus on one commercially supported Java EE application server, like other vendors also limit themselves to support one build/product only. Community builds are hardly supported. Commercially supported builds of Open Source products are not exactly from the same codebase as community builds. What's next for GlassFish and the Java EE community? There are conversations in place to tackle some of the community desires, most of them stated by Markus Eisele in his blog post. We will keep you posted.

Read the article

Using Delegates in C# (Part 1)

- by rajbk

This post provides a very basic introduction of delegates in C#. Part 2 of this post can be read here. A delegate is a class that is derived from System.Delegate. It contains a list of one or more methods called an invocation list. When a delegate instance is “invoked” with the arguments as defined in the signature of the delegate, each of the methods in the invocation list gets invoked with the arguments. The code below shows example with static and instance methods respectively: Static Methods 1: using System; 2: using System.Linq; 3: using System.Collections.Generic; 4: 5: public delegate void SayName(string name); 6: 7: public class Program 8: { 9: [STAThread] 10: static void Main(string[] args) 11: { 12: SayName englishDelegate = new SayName(SayNameInEnglish); 13: SayName frenchDelegate = new SayName(SayNameInFrench); 14: SayName combinedDelegate =(SayName)Delegate.Combine(englishDelegate, frenchDelegate); 15: 16: combinedDelegate.Invoke("Tom"); 17: Console.ReadLine(); 18: } 19: 20: static void SayNameInFrench(string name) { 21: Console.WriteLine("J'ai m'appelle " + name); 22: } 23: 24: static void SayNameInEnglish(string name) { 25: Console.WriteLine("My name is " + name); 26: } 27: } We have declared a delegate of type SayName with return type of void and taking an input parameter of name of type string. On line 12, we create a new instance of this delegate which refers to a static method - SayNameInEnglish. SayNameInEnglish has the same return type and parameter list as the delegate declaration. Once a delegate is instantiated, the instance will always refer to the same target. Delegates are immutable. On line 13, we create a new instance of the delegate but point to a different static method. As you may recall, a delegate instance encapsulates an invocation list. You create an invocation list by combining delegates using the Delegate.Combine method (there is an easier syntax as you will see later). When two non null delegate instances are combined, their invocation lists get combined to form a new invocation list. This is done in line 14. On line 16, we invoke the delegate with the Invoke method and pass in the required string parameter. Since the delegate has an invocation list with two entries, each of the method in the invocation list is invoked. If an unhandled exception occurs during the invocation of one of these methods, the exception gets bubbled up to the line where the invocation was made (line 16). If a delegate is null and you try to invoke it, you will get a System.NullReferenceException. We see the following output when the method is run: My name is TomJ'ai m'apelle Tom Instance Methods The code below outputs the same results as before. The only difference here is we are creating delegates that point to a target object (an instance of Translator) and instance methods which have the same signature as the delegate type. The target object can never be null. We also use the short cut syntax += to combine the delegates instead of Delegate.Combine. 1: public delegate void SayName(string name); 2: 3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: Translator translator = new Translator(); 9: SayName combinedDelegate = new SayName(translator.SayNameInEnglish); 10: combinedDelegate += new SayName(translator.SayNameInFrench); 11: 12: combinedDelegate.Invoke("Tom"); 13: Console.ReadLine(); 14: } 15: } 16: 17: public class Translator { 18: public void SayNameInFrench(string name) { 19: Console.WriteLine("J'ai m'appelle " + name); 20: } 21: 22: public void SayNameInEnglish(string name) { 23: Console.WriteLine("My name is " + name); 24: } 25: } A delegate can be removed from a combination of delegates by using the –= operator. Removing a delegate from an empty list or removing a delegate that does not exist in a non empty list will not result in an exception. Delegates are invoked synchronously using the Invoke method. We can also invoke them asynchronously using the BeginInvoke and EndInvoke methods which are compiler generated.

Read the article

Thou shalt not put code on a piedestal - Code is a tool, no more, no less

- by Ralf Westphal

“Write great code and everything else becomes easier” is what Paul Pagel believes in. That´s his version of an adage by Brian Marick he cites: “treat code as an end, not just a means.” And he concludes: “My post-Agile world is software craftsmanship.” I wonder, if that´s really the way to go. Will “simply” writing great code lead the software industry into the light? He´s alluding to the philosopher Kant who proposed, a human beings should never be treated as a means, but always as an end. But should we transfer this ethical statement into the world of software? I doubt it. Reason #1: Human beings are categorially different from code. They are autonomous entities who need to find a way of living happily together. To Kant it seemed this goal could only be reached if nobody (ab)used a human being for his/her purposes. Because using a human being, i.e. treating it as a means, would contradict the fundamental autonomy and freedom of human beings. People should hold up a symmetric view of their relationships: Since nobody wants to be (ab)used, nobody should (ab)use anybody else. If you want to be treated decently, with respect, in accordance with your own free will - which means as an end - then do the same to other people. Code is dead, it´s a product, it´s a tool for people to reach their goals. No company spends any money on code other than to save money or earn money in the long run. Code is not a puppy. Enterprises do not commission software development to just feel good in its company. Code is not a buddy. Code is a slave, if you will. A mechanical slave, a non-tangible robot. Code is a tool, is a tool. And if we start to treat it differently, if we elevate its status unduely… I guess that will contort our relationship in a contraproductive way. Please get me right: Just because something is “just a tool”, “just a product” does not mean we should not be careful while designing, building, using it. Right to the contrary. We should be very careful when writing code – but not for the code´s sake! We should be careful because we respect our customers who are fellow human beings who should be treated as an end. If we are careless, neglectful, ignorant when producing code on their behalf, then we´re using them. Being sloppy means you´re caring more for yourself that for your customer. You´re then treating the customer as a means to fulfill some of your own needs. That´s plain unethical behavior. Reason #2: The focus should always be on your purpose, not on any tool. But if code is treated as an end, then the focus is on the code. That might sound right, because where else should be your focus as a software developer? But, well, I´d say, your focus should be on delivering value to your customer. Because in the end your customer does not care if you write a single line of code. She just wants her problem to be solved. Solving problems is the purpose of any contractor. Code must be treated just as a means, a tool we know how to handle very well. But if we´re really trying to be craftsmen then we should be conscious about exactly that and act ethically. That means we must never be so focused on our tool as to be unable to suggest better solutions to the problems of our customers than code. I´m all with Paul when he urges us to “Write great code”. Sure, if you need to write code, then by all means do so. Write the best code you can think of – and then try to improve it. Paul has all the best intentions when he signs Brians “treat code as an end” - but as we all know: “The road to hell is paved with best intentions” ;-) Yes, I can imagine a “hell of code focus”. In fact, I don´t need to imagine it, I´m seeing it quite often. Because code hell is whereever two developers stand together and are so immersed in talking about all sorts of coding tricks, design patterns, code smells, technologies, platforms, tools that they lose sight of the big picture. Talking about TDD or SOLID or refactoring is a sign of consciousness – relative to the “cowboy coders” view of the world. But from yet another point of view TDD, SOLID, and refactoring are just cures for ailments within a system. And I fear, if “Writing great code” is the only focus or the main focus of software development, then we as an industry lose the ability to see that. Focus draws a line around something, it defines a horizon for perceptions and thinking. So if we focus on code our horizon ends where “the land of code” ends. I don´t think that should be our professional attitude. So what about Software Craftsmanship as the next big thing after Agility? I think Software Craftsmanship has an important message for all software developers and beyond. But to make it the successor of the Agility movement seems to miss a point. Agility never claimed to solve all software development problems, I´d say. So to blame it for having missed out on certain aspects of it is wrong. If I had to summarize Agility in one word I´d say “Value”. Agility put value for the customer back in software development. Focus on delivering value early and often – that´s Agility´s mantra. All else follows from that. And I ask you: Is that obsolete? Is delivering value not hip anymore? No, sure not. That´s our very purpose as software developers. So how can Agility become obsolete and need to be replaced? We need to do away with this “either/or”-thinking. It´s either Agility or Lean or Software Craftsmanship or whatnot. Instead we should start integrating concepts and movements. Think “both/and”. Think Agility plus Software Craftsmanship plus Lean plus whatnot. We don´t neet to tear down anything from a piedestal and replace it with a new idol. Instead we should do away with piedestals and arrange whatever is helpful is a circle. Then we can turn to concepts, movements for whatever they are best. After 10 years of Agility we should be able to identify what it was good at – and keep that. Keep Agility around and add whatever Agility was lacking or never concerned with. Add whatever is at the core of Software Craftsmanship. Add whatever is at the core of Lean etc. But don´t call out the age of Post-Agility. Because it better never will end. Because once we start to lose Agility´s core we´re losing focus of the customer.

Read the article

Anatomy of a .NET Assembly - CLR metadata 2

- by Simon Cooper

Before we look any further at the CLR metadata, we need a quick diversion to understand how the metadata is actually stored. Encoding table information As an example, we'll have a look at a row in the TypeDef table. According to the spec, each TypeDef consists of the following: Flags specifying various properties of the class, including visibility. The name of the type. The namespace of the type. What type this type extends. The field list of this type. The method list of this type. How is all this data actually represented? Offset & RID encoding Most assemblies don't need to use a 4 byte value to specify heap offsets and RIDs everywhere, however we can't hard-code every offset and RID to be 2 bytes long as there could conceivably be more than 65535 items in a heap or more than 65535 fields or types defined in an assembly. So heap offsets and RIDs are only represented in the full 4 bytes if it is required; in the header information at the top of the #~ stream are 3 bits indicating if the #Strings, #GUID, or #Blob heaps use 2 or 4 bytes (the #US stream is not accessed from metadata), and the rowcount of each table. If the rowcount for a particular table is greater than 65535 then all RIDs referencing that table throughout the metadata use 4 bytes, else only 2 bytes are used. Coded tokens Not every field in a table row references a single predefined table. For example, in the TypeDef extends field, a type can extend another TypeDef (a type in the same assembly), a TypeRef (a type in a different assembly), or a TypeSpec (an instantiation of a generic type). A token would have to be used to let us specify the table along with the RID. Tokens are always 4 bytes long; again, this is rather wasteful of space. Cutting the RID down to 2 bytes would make each token 3 bytes long, which isn't really an optimum size for computers to read from memory or disk. However, every use of a token in the metadata tables can only point to a limited subset of the metadata tables. For the extends field, we only need to be able to specify one of 3 tables, which we can do using 2 bits: 0x0: TypeDef 0x1: TypeRef 0x2: TypeSpec We could therefore compress the 4-byte token that would otherwise be needed into a coded token of type TypeDefOrRef. For each type of coded token, the least significant bits encode the table the token points to, and the rest of the bits encode the RID within that table. We can work out whether each type of coded token needs 2 or 4 bytes to represent it by working out whether the maximum RID of every table that the coded token type can point to will fit in the space available. The space available for the RID depends on the type of coded token; a TypeOrMethodDef coded token only needs 1 bit to specify the table, leaving 15 bits available for the RID before a 4-byte representation is needed, whereas a HasCustomAttribute coded token can point to one of 18 different tables, and so needs 5 bits to specify the table, only leaving 11 bits for the RID before 4 bytes are needed to represent that coded token type. For example, a 2-byte TypeDefOrRef coded token with the value 0x0321 has the following bit pattern: 0 3 2 1 0000 0011 0010 0001 The first two bits specify the table - TypeRef; the other bits specify the RID. Because we've used the first two bits, we've got to shift everything along two bits: 000000 1100 1000 This gives us a RID of 0xc8. If any one of the TypeDef, TypeRef or TypeSpec tables had more than 16383 rows (2^14 - 1), then 4 bytes would need to be used to represent all TypeDefOrRef coded tokens throughout the metadata tables. Lists The third representation we need to consider is 1-to-many references; each TypeDef refers to a list of FieldDef and MethodDef belonging to that type. If we were to specify every FieldDef and MethodDef individually then each TypeDef would be very large and a variable size, which isn't ideal. There is a way of specifying a list of references without explicitly specifying every item; if we order the MethodDef and FieldDef tables by the owning type, then the field list and method list in a TypeDef only have to be a single RID pointing at the first FieldDef or MethodDef belonging to that type; the end of the list can be inferred by the field list and method list RIDs of the next row in the TypeDef table. Going back to the TypeDef If we have a look back at the definition of a TypeDef, we end up with the following reprensentation for each row: Flags - always 4 bytes Name - a #Strings heap offset. Namespace - a #Strings heap offset. Extends - a TypeDefOrRef coded token. FieldList - a single RID to the FieldDef table. MethodList - a single RID to the MethodDef table. So, depending on the number of entries in the heaps and tables within the assembly, the rows in the TypeDef table can be as small as 14 bytes, or as large as 24 bytes. Now we've had a look at how information is encoded within the metadata tables, in the next post we can see how they are arranged on disk.

Read the article

Expectations + Rewards = Innovation

- by D'Arcy Lussier

“Innovation” is a heavy word. We regard those that embrace it as “Innovators”. We describe organizations as being “Innovative”. We hold those associated with the word in high regard, even though its dictionary definition is very simple: Introducing something new. What our culture has done is wrapped Innovation in white robes and a gold crown. Innovation is rarely just introducing something new. Innovations and innovators are typically associated with other terms: groundbreaking, genius, industry-changing, creative, leading. Being a true innovator and creating innovations are a big deal, and something companies try to strive for…or at least say they strive for. There’s huge value in being recognized as an innovator in an industry, since the idea is that innovation equates to increased profitability. IBM ran an ad a few years back that showed what their view of innovation is: “The point of innovation is to make actual money.” If the money aspect makes you feel uneasy, consider it another way: the point of innovation is to <insert payoff here>. Companies that innovate will be more successful. Non-profits that innovate can better serve their target clients. Governments that innovate can better provide services to their citizens. True innovation is not easy to come by though. As with anything in business, how well an organization will innovate is reliant on the employees it retains, the expectations placed on those employees, and the rewards available to them. In a previous blog post I talked about one formula: Right Employees + Happy Employees = Productive Employees I want to introduce a new one, that builds upon the previous one: Expectations + Rewards = Innovation The level of innovation your organization will realize is directly associated with the expectations you place on your staff and the rewards you make available to them. Expectations We may feel uncomfortable with the idea of placing expectations on our staff, mainly because expectation has somewhat of a negative or cold connotation to it: “I expect you to act this way or else!” The problem is in the or-else part…we focus on the negative aspects of failing to meet expectations instead of looking at the positive side. “I expect you to act this way because it will produce <insert benefit here>”. Expectations should not be set to punish but instead be set to ensure quality. At a recent conference I spoke with some Microsoft employees who told me that you have five years from starting with the company to reach a “Senior” level. If you don’t, then you’re let go. The expectation Microsoft placed on their staff is that they should be working towards improving themselves, taking more responsibility, and thus ensure that there is a constant level of quality in the workforce. Rewards Let me be clear: a paycheck is not a reward. A paycheck is simply the employer’s responsibility in the employee/employer relationship. A paycheck will never be the key motivator to drive innovation. Offering employees something over and above their required compensation can spur them to greater performance and achievement. Working in the food service industry, this tactic was used again and again: whoever has the highest sales over lunch will receive a free lunch/gift certificate/entry into a draw/etc. There was something to strive for, to try beyond the baseline of what our serving jobs were. It was through this that innovative sales techniques would be tried and honed, with key servers being top sellers time and time again. At a code camp I spoke at, I was amazed to see that all the employees from one company receive $100 Visa gift cards as a thank you for taking time to speak. Again, offering something over and above that can give that extra push for employees. Rewards work. But what about the fairness angle? In the restaurant example I gave, there were servers that would never win the competition. They just weren’t good enough at selling and never seemed to get better. So should those that did work at performing better and produce more sales for the restaurant not get rewarded because those who weren’t working at performing better might get upset? Of course not! Organizations succeed because of their top performers and those that strive to join their ranks. The Expectation/Reward Graph While the Expectations + Rewards = Innovation formula may seem like a simple mathematics formula, there’s much more going under the hood. In fact there are three different outcomes that could occur based on what you put in as values for Expectations and Rewards. Consider the graph below and the descriptions that follow: Disgruntled – High Expectation, Low Reward I worked at a company where the mantra was “Company First, Because We Pay You”. Even today I still hear stories of how this sentiment continues to be perpetuated: They provide you a paycheck and a means to live, therefore you should always put them as your top priority. Of course, this is a huge imbalance in the expectation/reward equation. Why would anyone willingly meet high expectations of availability, workload, deadlines, etc. when there is no reward other than a paycheck to show for it? Remember: paychecks are not rewards! Instead, you see employees be disgruntled which not only affects the level of production but also the level of quality within an organization. It also means that you see higher turnover. Complacent – Low Expectation, Low Reward Complacency is a systemic problem that typically exists throughout all levels of an organization. With no real expectations or rewards, nobody needs to excel. In fact, those that do try to innovate, improve, or introduce new things into the organization might be shunned or pushed out by the rest of the staff who are just doing things the same way they’ve always done it. The bigger issue for the organization with low/low values is that at best they’ll never grow beyond their current size (and may shrink actually), and at worst will cease to exist. Entitled – Low Expectation, High Reward It’s one thing to say you have the best people and reward them as such, but its another thing to actually have the best people and reward them as such. Organizations with Entitled employees are the former: their organization provides them with all types of comforts, benefits, and perks. But there’s no requirement before the rewards are dolled out, and there’s no short-list of who receives the rewards. Everyone in the company is treated the same and is given equal share of the spoils. Entitlement is actually almost identical with Complacency with one notable difference: just try to introduce higher expectations into an entitled organization! Entitled employees have been spoiled for so long that they can’t fathom having rewards taken from them, or having to achieve specific levels of performance before attaining them. Those running the organization also buy in to the Entitled sentiment, feeling that they must persist the same level of comforts to appease their staff…even though the quality of the employee pool may be suspect. Innovative – High Expectation, High Reward Finally we have the Innovative organization which places high expectations but also provides high rewards. This organization gets it: if you truly want the best employees you need to apply equal doses of pressure and praise. Realize that I’m not suggesting crazy overtime or un-realistic working conditions. I do not agree with the “Glengary-Glenross” method of encouragement. But as anyone who follows sports can tell you, the teams that win are the ones where the coaches push their players to be their best; to achieve new levels of performance that they didn’t know they could receive. And the result for the players is more money, fame, and opportunity. It’s in this environment that organizations can focus on innovation – true innovation that builds the business and allows everyone involved to truly benefit. In Closing Organizations love to use the word “Innovation” and its derivatives, but very few actually do innovate. For many, the term has just become another marketing buzzword to lump in with all the other business terms that get overused. But for those organizations that truly get the value of innovation, they will be the ones surging forward while other companies simply fade into the background. And they will be the organizations that expect more from their employees, and give them their just rewards.

Read the article

Process Centric Banking: Loan Origination Solution

- by Manish Palaparthy

There is an old proverb that goes, "The difference between theory and practice is greater in practice than in theory". So, we keep doing numerous "Proof of Concepts" with our own products on various business cases to analyze them deeply, understand and explain to our customers. We then present our learnings as they happened. The awareness of each PoC should help readers increase the trustworthiness of the results coming out of these PoCs. I present one such PoC where we invested a lot of time&effort. Process Centric Banking : Loan Origination Solution Loan Origination is a process by which a borrower applies for a new loan and the lender processes that application. Loan origination includes the series of steps taken by the bank from the point the customer shows interest in a loan product all the way to disbursal of funds. The Loan Origination process is relevant for many kind of lenders in Financial services: Banks, Credit Unions, NBFCs(Non Banking Financial Companies) and so on. For simplicity sake, I will use "Bank" as the lending institution in the rest of my article. Loan Origination is one of the core processes for Banks as it is the process by which the it creates assets against which the Institution earns most of its profits from. A well tuned loan origination process can affect the Bank in many positive ways. Banks have always shown great interest in automating the loan origination process for the above reason. However, due the constant changes in customer environment, market dynamics, prevailing economic conditions, cost pressures & regulatory environment they run into lot of challenges. Let me categorize some of these challenges for you Customer Environment Multiple Channels: Customer can use any of the available channels (Internet Banking, Email, Fax, Branch, Phone Banking, ATM, Broker, Mobile, Snail Mail) to perform all or some of the activities related to her Visibility into the origination process: Expect immediate update on the status of loan processing & alert messages Reduced Turn Around Time: Expect loans to be processed with least turn around time Reduced loan processing fees: Partly due to market dynamics the customer expects the loan processing fee to be negligible Market Dynamics Competitive environment: The competition keeps creating many variants of loan products to attract customers, the bank needs to create similar product variants with better offers to attract customers or keep existing ones Ability to migrate loans from one vendor to another: It has become really easy for retail customers to move from one bank to the other given the low fee of loan processing and highly attractive offers. How does the bank protect it's customer base while actively engaging with potential customers banking with competitor banks Flexibility to react to market developments: Market development greatly influence loan processing, underwriting, asset valuation, risk mitigation rules. Can the bank modify rules and policies, the idea is not just to react to market developments but to pro-actively manage new developments Economic conditions Constant change in various rates and their implications on the rates and rules applied when on-boarding a loan: How quickly can the bank apply changes to rates offered to customers when the central bank changes various rates Requirements of Audit by the central banker: Tough economic conditions have demanded much more stringent audit rules and tests. The banks needs to produce ready reports(historic & operational) for audit compliance Risk Mitigation: While risk mitigation has always been a key concern for the bank, this is the area where the bank's underwriters & risk analysts spend the maximum time when processing a loan application. In order to reduce TAT the bank cannot compromise on its risk mitigation strategies Cost pressures Reduce Cost of processing per application: To deliver a reduced loan processing fee to the customer, the bank needs to keep its cost per processing loan application low. Meet customer TAT expectations while reducing the queues and the systems being used to process the loan application: The loan application could potentially be spending a lot of time waiting in the queue for further processing. Different volumes & patterns of applications demand different queuing algorithms. The bank needs to have real-time visibility into these queues and have the flexibility to change queuing algorithms at runtime Increase the use of electronic communication and reduce the branch channel usage: Lesser automation leads not only leads to Increased turn around time, it also impacts more costs to reach out to customers The objective of our PoC was to implement a Loan Origination Solution whose ownership lies with the bank and effectively meet the challenges listed above. We built a simple story board for the solution We then went about implementing our storyboard using Oracle BPM Suite, Webcenter Content : Imaging. The web UI has been built on ADF technolgies, while the integration with core-services has been implemented using the underlying SOA infrastructure. The BPM process model is quite exhaustive can meet all the challenges listed above to reasonable degree. A bank intending to implement an end-to-end Loan Origination Solution has multiple options at it's disposal. It can Develop a customer Loan Origination Application from scratch: Gives maximum opportunity to build what you want but inflexible to upgrade and maintain. Higher TCO in long term Buy a Packaged application & customize it: Customizing a generic loan application can be tedious and prove as difficult as above. Build it using many disparate & un-integrated tools: Initially seems easier than developing from scratch. But, without integrated tool sets this is not a viable approach either or A solution based on a Framework: Independent Services and Business Process Modeling provide decoupled architecture that is flexible. We built this framework end-to-end with processes the core process of loan origination & several sub-processes such as Analyse and define customer needs, customer credit verification, identity check processes, legal review process, New customer registration & risk assessment.

Read the article

Could not load type 'Default.DataMatch' in DataMatch.aspx file

- by salvationishere

I am developing a C# VS 2008 / SQL Server 2008 website, but now I am getting the above error when I build it. I included the Default.aspx, Default.aspx.cs, DataMatch.aspx, and DataMatch.aspx.cs files below. What do I need to do to fix this? Default.aspx: <%@ Page Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" Title="Untitled Page" %> ... DataMatch.aspx: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="DataMatch.aspx.cs" Inherits="_Default.DataMatch" %> ... Default.aspx.cs: using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Collections.Generic; using System.IO; using System.Drawing; using System.ComponentModel; using System.Data.SqlClient; using ADONET_namespace; using System.Security.Principal; //using System.Windows; public partial class _Default : System.Web.UI.Page //namespace AddFileToSQL { //protected System.Web.UI.HtmlControls.HtmlInputFile uploadFile; //protected System.Web.UI.HtmlControls.HtmlInputButton btnOWrite; //protected System.Web.UI.HtmlControls.HtmlInputButton btnAppend; protected System.Web.UI.WebControls.Label Label1; protected static string inputfile = ""; public static string targettable; public static string selection; // Number of controls added to view state protected int default_NumberOfControls { get { if (ViewState["default_NumberOfControls"] != null) { return (int)ViewState["default_NumberOfControls"]; } else { return 0; } } set { ViewState["default_NumberOfControls"] = value; } } protected void uploadFile_onclick(object sender, EventArgs e) { } protected void Load_GridData() { //GridView1.DataSource = ADONET_methods.DisplaySchemaTables(); //GridView1.DataBind(); } protected void btnOWrite_Click(object sender, EventArgs e) { if (uploadFile.PostedFile.ContentLength > 0) { feedbackLabel.Text = "You do not have sufficient access to overwrite table records."; } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void btnAppend_Click(object sender, EventArgs e) { string fullpath = Page.Request.PhysicalApplicationPath; string path = uploadFile.PostedFile.FileName; if (File.Exists(path)) { // Create a file to write to. try { StreamReader sr = new StreamReader(path); string s = ""; while (sr.Peek() > 0) s = sr.ReadLine(); sr.Close(); } catch (IOException exc) { Console.WriteLine(exc.Message + "Cannot open file."); return; } } if (uploadFile.PostedFile.ContentLength > 0) { inputfile = System.IO.File.ReadAllText(path); Session["Message"] = inputfile; Response.Redirect("DataMatch.aspx"); } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void Page_Load(object sender, EventArgs e) { if (Request.IsAuthenticated) { WelcomeBackMessage.Text = "Welcome back, " + User.Identity.Name + "!"; // Reference the CustomPrincipal / CustomIdentity CustomIdentity ident = User.Identity as CustomIdentity; if (ident != null) WelcomeBackMessage.Text += string.Format(" You are the {0} of {1}.", ident.Title, ident.CompanyName); AuthenticatedMessagePanel.Visible = true; AnonymousMessagePanel.Visible = false; if (!Page.IsPostBack) { Load_GridData(); } } else { AuthenticatedMessagePanel.Visible = false; AnonymousMessagePanel.Visible = true; } } protected void GridView1_SelectedIndexChanged(object sender, EventArgs e) { GridViewRow row = GridView1.SelectedRow; targettable = row.Cells[2].Text; } } DataMatch.aspx.cs: using System; using System.Collections; using System.Collections.Generic; using System.Data; using System.Data.SqlClient; using System.Diagnostics; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using ADONET_namespace; //using MatrixApp; //namespace AddFileToSQL //{ public partial class DataMatch : AddFileToSQL._Default { protected System.Web.UI.WebControls.PlaceHolder phTextBoxes; protected System.Web.UI.WebControls.PlaceHolder phDropDownLists; protected System.Web.UI.WebControls.Button btnAnotherRequest; protected System.Web.UI.WebControls.Panel pnlCreateData; protected System.Web.UI.WebControls.Literal lTextData; protected System.Web.UI.WebControls.Panel pnlDisplayData; protected static string inputfile2; static string[] headers = null; static string[] data = null; static string[] data2 = null; static DataTable myInputFile = new DataTable("MyInputFile"); static string[] myUserSelections; static bool restart = false; private DropDownList[] newcol; int @temp = 0; string @tempS = ""; string @tempT = ""; // a Property that manages a counter stored in ViewState protected int NumberOfControls { get { return (int)ViewState["NumControls"]; } set { ViewState["NumControls"] = value; } } private Hashtable ddl_ht { get { return (Hashtable)ViewState["ddl_ht"]; } set { ViewState["ddl_ht"] = value; } } // Page Load private void Page_Load(object sender, System.EventArgs e) { if (!Page.IsPostBack) { ddl_ht = new Hashtable(); this.NumberOfControls = 0; } } // This data comes from input file private void PopulateFileInputTable() { myInputFile.Columns.Clear(); string strInput, newrow; string[] oneRow; DataColumn myDataColumn; DataRow myDataRow; int result, numRows; //Read the input file strInput = Session["Message"].ToString(); data = strInput.Split('\r'); //Headers headers = data[0].Split('|'); //Data for (int i = 0; i < data.Length; i++) { newrow = data[i].TrimStart('\n'); data[i] = newrow; } result = String.Compare(data[data.Length - 1], ""); numRows = data.Length; if (result == 0) { numRows = numRows - 1; } data2 = new string[numRows]; for (int a = 0, b = 0; a < numRows; a++, b++) { data2[b] = data[a]; } // Create columns for (int col = 0; col < headers.Length; col++) { @temp = (col + 1); @tempS = @temp.ToString(); @tempT = "@col"+ @temp.ToString(); myDataColumn = new DataColumn(); myDataColumn.DataType = Type.GetType("System.String"); myDataColumn.ColumnName = headers[col]; myInputFile.Columns.Add(myDataColumn); ddl_ht.Add(@tempT, headers[col]); } // Create new DataRow objects and add to DataTable. for (int r = 0; r < numRows - 1; r++) { oneRow = data2[r + 1].Split('|'); myDataRow = myInputFile.NewRow(); for (int c = 0; c < headers.Length; c++) { myDataRow[c] = oneRow[c]; } myInputFile.Rows.Add(myDataRow); } NumberOfControls = headers.Length; myUserSelections = new string[NumberOfControls]; } //Create display panel private void CreateDisplayPanel() { btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); btnSubmit.Style.Add("top", "200px"); btnSubmit.Style.Add("left", "400px"); newcol = CreateDropDownLists(); for (int counter = 0; counter < NumberOfControls; counter++) { pnlDisplayData.Controls.Add(newcol[counter]); pnlDisplayData.Controls.Add(new LiteralControl(" ")); pnlDisplayData.Visible = true; pnlDisplayData.FindControl(newcol[counter].ID); } } //Recreate display panel private void RecreateDisplayPanel() { btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); btnSubmit.Style.Add("top", "200px"); btnSubmit.Style.Add("left", "400px"); newcol = RecreateDropDownLists(); for (int counter = 0; counter < NumberOfControls; counter++) { pnlDisplayData.Controls.Add(newcol[counter]); pnlDisplayData.Controls.Add(new LiteralControl(" ")); pnlDisplayData.Visible = true; pnlDisplayData.FindControl(newcol[counter].ID); } } // Add DropDownList Control to Placeholder private DropDownList[] CreateDropDownLists() { DropDownList[] dropDowns = new DropDownList[NumberOfControls]; for (int counter = 0; counter < NumberOfControls; counter++) { DropDownList ddl = new DropDownList(); SqlDataReader dr2 = ADONET_methods.DisplayTableColumns(targettable); ddl.ID = "DropDownListID" + counter.ToString(); int NumControls = targettable.Length; DataTable dt = new DataTable(); dt.Load(dr2); ddl.DataValueField = "COLUMN_NAME"; ddl.DataTextField = "COLUMN_NAME"; ddl.DataSource = dt; ddl.SelectedIndexChanged += new EventHandler(ddlList_SelectedIndexChanged); ddl.DataBind(); ddl.AutoPostBack = true; ddl.EnableViewState = true; //Preserves View State info on Postbacks dr2.Close(); ddl.Items.Add("IGNORE"); dropDowns[counter] = ddl; } return dropDowns; } protected void ddlList_SelectedIndexChanged(object sender, EventArgs e) { DropDownList ddl = (DropDownList)sender; string ID = ddl.ID; } // Add TextBoxes Control to Placeholder private DropDownList[] RecreateDropDownLists() { DropDownList[] dropDowns = new DropDownList[NumberOfControls]; for (int counter = 0; counter < NumberOfControls; counter++) { DropDownList ddl = new DropDownList(); SqlDataReader dr2 = ADONET_methods.DisplayTableColumns(targettable); ddl.ID = "DropDownListID" + counter.ToString(); int NumControls = targettable.Length; DataTable dt = new DataTable(); dt.Load(dr2); ddl.DataValueField = "COLUMN_NAME"; ddl.DataTextField = "COLUMN_NAME"; ddl.DataSource = dt; ddl.SelectedIndexChanged += new EventHandler(ddlList_SelectedIndexChanged); ddl.DataBind(); ddl.AutoPostBack = true; ddl.EnableViewState = false; //Preserves View State info on Postbacks dr2.Close(); ddl.Items.Add("IGNORE"); dropDowns[counter] = ddl; } return dropDowns; } private void CreateLabels() { for (int counter = 0; counter < NumberOfControls; counter++) { Label lbl = new Label(); lbl.ID = "Label" + counter.ToString(); lbl.Text = headers[counter]; lbl.Style["position"] = "absolute"; lbl.Style["top"] = 60 * counter + 10 + "px"; lbl.Style["left"] = 250 + "px"; pnlDisplayData.Controls.Add(lbl); pnlDisplayData.Controls.Add(new LiteralControl(" ")); } } // Add TextBoxes Control to Placeholder private void RecreateLabels() { for (int counter = 0; counter < NumberOfControls; counter++) { Label lbl = new Label(); lbl.ID = "Label" + counter.ToString(); lbl.Text = headers[counter]; lbl.Style["position"] = "absolute"; lbl.Style["top"] = 60 * counter + 10 + "px"; lbl.Style["left"] = 250 + "px"; pnlDisplayData.Controls.Add(lbl); pnlDisplayData.Controls.Add(new LiteralControl(" ")); } } // Create TextBoxes and DropDownList data here on postback. protected override void CreateChildControls() { // create the child controls if the server control does not contains child controls this.EnsureChildControls(); // Creates a new ControlCollection. this.CreateControlCollection(); // Here we are recreating controls to persist the ViewState on every post back if (Page.IsPostBack) { RecreateDisplayPanel(); RecreateLabels(); } // Create these conrols when asp.net page is created else { PopulateFileInputTable(); CreateDisplayPanel(); CreateLabels(); } // Prevent dropdownlists and labels from being created again. if (restart == false) { this.ChildControlsCreated = true; } else if (restart == true) { this.ChildControlsCreated = false; } } private void AppendRecords() { switch (targettable) { case "ContactType": for (int r = 0; r < myInputFile.Rows.Count; r++) { resultLabel.Text = ADONET_methods.AppendDataCT(myInputFile.Rows[r], ddl_ht); } break; case "Contact": for (int r = 0; r < myInputFile.Rows.Count; r++) { resultLabel.Text = ADONET_methods.AppendDataC(myInputFile.Rows[r], ddl_ht); } break; case "AddressType": for (int r = 0; r < myInputFile.Rows.Count; r++) { resultLabel.Text = ADONET_methods.AppendDataAT(myInputFile.Rows[r], ddl_ht); } break; default: resultLabel.Text = "You do not have access to modify this table. Please select a different target table and try again."; restart = true; break; //throw new ArgumentOutOfRangeException("targettable type", targettable); } } // Read all the data from TextBoxes and DropDownLists protected void btnSubmit_Click(object sender, System.EventArgs e) { //int cnt = FindOccurence("DropDownListID"); AppendRecords(); pnlDisplayData.Visible = false; btnSubmit.Visible = false; resultLabel.Attributes.Add("style", "align:center"); btnSubmit.Style.Add("top", "auto"); btnSubmit.Style.Add("left", "auto"); btnSubmit.Style.Add("position", "absolute"); int bSubmitPosition = NumberOfControls; btnSubmit.Style.Add("top", System.Convert.ToString(bSubmitPosition)+"px"); resultLabel.Visible = true; Instructions.Visible = false; if (restart == true) { CreateChildControls(); } } private int FindOccurence(string substr) { string reqstr = Request.Form.ToString(); return ((reqstr.Length - reqstr.Replace(substr, "").Length) / substr.Length); } #region Web Form Designer generated code override protected void OnInit(EventArgs e) { // // CODEGEN: This call is required by the ASP.NET Web Form Designer. // InitializeComponent(); base.OnInit(e); } /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { } #endregion } //}

Read the article

Sound issues after trying everything

- by Lerp

I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

Read the article

Developing Schema Compare for Oracle (Part 1)

- by Simon Cooper

SQL Compare is one of Red Gate's most successful SQL Server tools; it allows developers and DBAs to compare and synchronize the contents of their databases. Although similar tools exist for Oracle, they are quite noticeably lacking in the usability and stability that SQL Compare is known for in the SQL Server world. We could see a real need for a usable schema comparison tools for Oracle, and so the Schema Compare for Oracle project was born. Over the next few weeks, as we come up to release of v1, I'll be doing a series of posts on the development of Schema Compare for Oracle. For the first post, I thought I would start with the main pitfalls that we stumbled across when developing the product, especially from a SQL Server background. 1. Schemas and Databases The most obvious difference is that the concept of a 'database' is quite different between Oracle and SQL Server. On SQL Server, one server instance has multiple databases, each with separate schemas. There is typically little communication between separate databases, and most databases are no more than about 1000-2000 objects. This means SQL Compare can register an entire database in a reasonable amount of time, and cross-database dependencies probably won't be an issue. It is a quite different scene under Oracle, however. The terms 'database' and 'instance' are used interchangeably, (although technically 'database' refers to the datafiles on disk, and 'instance' the running Oracle process that reads & writes to the database), and a database is a single conceptual entity. This immediately presents problems, as it is infeasible to register an entire database as we do in SQL Compare; in my Oracle install, using the standard recommended options, there are 63975 system objects. If we tried to register all those, not only would it take hours, but the client would probably run out of memory before we finished. As a result, we had to allow people to specify what schemas they wanted to register. This decision had quite a few knock-on effects for the design, which I will cover in a future post. 2. Connecting to Oracle The next obvious difference is in actually connecting to Oracle – in SQL Server, you can specify a server and database, and off you go. On Oracle things are slightly more complicated. SIDs, Service Names, and TNS A database (the files on disk) must have a unique identifier for the databases on the system, called the SID. It also has a global database name, which consists of a name (which doesn't have to match the SID) and a domain. Alternatively, you can identify a database using a service name, which normally has a 1-to-1 relationship with instances, but may not if, for example, using RAC (Real Application Clusters) for redundancy and failover. You specify the computer and instance you want to connect to using TNS (Transparent Network Substrate). The user-visible parts are a config file (tnsnames.ora) on the client machine that specifies how to connect to an instance. For example, the entry for one of my test instances is: SC_11GDB1 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = simonctest)(PORT = 1521)) ) (CONNECT_DATA = (SID = 11gR1db1) ) ) This gives the hostname, port, and SID of the instance I want to connect to, and associates it with a name (SC_11GDB1). The tnsnames syntax also allows you to specify failover, multiple descriptions and address lists, and client load balancing. You can then specify this TNS identifier as the data source in a connection string. Although using ODP.NET (the .NET dlls provided by Oracle) was fine for internal prototype builds, once we released the EAP we discovered that this simply wasn't an acceptable solution for installs on other people's machines. Due to .NET assembly strong naming, users had to have installed on their machines the exact same version of the ODP.NET dlls as we had on our build server. We couldn't ship the ODP.NET dlls with our installer as the Oracle license agreement prohibited this, and we didn't want to force users to install another Oracle client just so they can run our program. To be able to list the TNS entries in the connection dialog, we also had to locate and parse the tnsnames.ora file, which was complicated by users with several Oracle client installs and intricate TNS entries. After much swearing at our computers, we eventually decided to use a third party Oracle connection library from Devart that we could ship with our program; this could use whatever client version was installed, parse the TNS entries for us, and also had the nice feature of being able to connect to an Oracle server without having any client installed at all. Unfortunately, their current license agreement prevents us from shipping an Oracle SDK, but that's a bridge we'll cross when we get to it. 3. Running synchronization scripts The most important difference is that in Oracle, DDL is non-transactional; you cannot rollback DDL statements like you can on SQL Server. Although we considered various solutions to this, including using the flashback archive or recycle bin, or generating an undo script, no reliable method of completely undoing a half-executed sync script has yet been found; so in this case we simply have to trust that the DBA or developer will check and verify the script before running it. However, before we got to that stage, we had to get the scripts to run in the first place... To run a synchronization script from SQL Compare we essentially pass the script over to the SqlCommand.ExecuteNonQuery method. However, when we tried to do the same for an OracleConnection we got a very strange error – 'ORA-00911: invalid character', even when running the most basic CREATE TABLE command. After much hair-pulling and Googling, we discovered that Oracle has got some very strange behaviour with semicolons at the end of statements. To understand what's going on, we need to take a quick foray into SQL and PL/SQL. PL/SQL is not T-SQL In SQL Server, T-SQL is the language used to interface with the database. It has DDL, DML, control flow, and many other nice features (like Turing-completeness) that you can mix and match in the same script. In Oracle, DDL SQL and PL/SQL are two completely separate languages, with different syntax, different datatypes and different execution engines within the instance. Oracle SQL is much more like 'pure' ANSI SQL, with no state, no control flow, and only the basic DML commands. PL/SQL is the Turing-complete language, but can only do DML and DCL (i.e. BEGIN TRANSATION commands). Any DDL or SQL commands that aren't recognised by the PL/SQL engine have to be passed back to the SQL engine via an EXECUTE IMMEDIATE command. In PL/SQL, a semicolons is a valid token used to delimit the end of a statement. In SQL, a semicolon is not a valid token (even though the Oracle documentation gives them at the end of the syntax diagrams) . When you execute the command CREATE TABLE table1 (COL1 NUMBER); in SQL*Plus the semicolon on the end is a command to SQL*Plus to execute the preceding statement on the server; it strips off the semicolon before passing it on. SQL Developer does a similar thing. When executing a PL/SQL block, however, the syntax is like so: BEGIN INSERT INTO table1 VALUES (1); INSERT INTO table1 VALUES (2); END; / In this case, the semicolon is accepted by the PL/SQL engine as a statement delimiter, and instead the / is the command to SQL*Plus to execute the current block. This explains the ORA-00911 error we got when trying to run the CREATE TABLE command – the server is complaining about the semicolon on the end. This also means that there is no SQL syntax to execute more than one DDL command in the same OracleCommand. Therefore, we would have to do a round-trip to the server for every command we want to execute. Obviously, this would cause lots of network traffic and be very slow on slow or congested networks. Our first attempt at a solution was to wrap every SQL statement (without semicolon) inside an EXECUTE IMMEDIATE command in a PL/SQL block and pass that to the server to execute. One downside of this solution is that we get no feedback as to how the script execution is going; we're currently evaluating better solutions to this thorny issue. Next up: Dependencies; how we solved the problem of being unable to register the entire database, and the knock-on effects to the whole product.

Read the article

External USB 3 drive not recognized

- by ilan123

Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

Read the article

Five Key Strategies in Master Data Management

- by david.butler(at)oracle.com

Here is a very interesting Profit Magazine article on MDM: A recent customer survey reveals the deleterious effects of data fragmentation. by Trevor Naidoo, December 2010 Across industries and geographies, IT organizations have grown in complexity, whether due to mergers and acquisitions, or decentralized systems supporting functional or departmental requirements. With systems architected over time to support unique, one-off process needs, they are becoming costly to maintain, and the Internet has only further added to the complexity. Data fragmentation has become a key inhibitor in delivering flexible, user-friendly systems. The Oracle Insight team conducted a survey assessing customers' master data management (MDM) capabilities over the past two years to get a sense of where they are in terms of their capabilities. The responses, by 27 respondents from six different industries, reveal five key areas in which customers need to improve their data management in order to get better financial results. 1. Less than 15 percent of organizations surveyed understand the sources and quality of their master data, and have a roadmap to address missing data domains. Examples of the types of master data domains referred to are customer, supplier, product, financial and site. Many organizations have multiple sources of master data with varying degrees of data quality in each source -- customer data stored in the customer relationship management system is inconsistent with customer data stored in the order management system. Imagine not knowing how many places you stored your customer information, and whether a customer's address was the most up to date in each source. In fact, more than 55 percent of the respondents in the survey manage their data quality on an ad-hoc basis. It is important for organizations to document their inventory of data sources and then profile these data sources to ensure that there is a consistent definition of key data entities throughout the organization. Some questions to ask are: How do we define a customer? What is a product? How do we define a site? The goal is to strive for one common repository for master data that acts as a cross reference for all other sources and ensures consistent, high-quality master data throughout the organization. 2. Only 18 percent of respondents have an enterprise data management strategy to ensure that data is treated as an asset to the organization. Most respondents handle data at the department or functional level and do not have an enterprise view of their master data. The sales department may track all their interactions with customers as they move through the sales cycle, the service department is tracking their interactions with the same customers independently, and the finance department also has a different perspective on the same customer. The salesperson may not be aware that the customer she is trying to sell to is experiencing issues with existing products purchased, or that the customer is behind on previous invoices. The lack of a data strategy makes it difficult for business users to turn data into information via reports. Without the key building blocks in place, it is difficult to create key linkages between customer, product, site, supplier and financial data. These linkages make it possible to understand patterns. A well-defined data management strategy is aligned to the business strategy and helps create the governance needed to ensure that data stewardship is in place and data integrity is intact. 3. Almost 60 percent of respondents have no strategy to integrate data across operational applications. Many respondents have several disparate sources of data with no strategy to keep them in sync with each other. Even though there is no clear strategy to integrate the data (see #2 above), the data needs to be synced and cross-referenced to keep the business processes running. About 55 percent of respondents said they perform this integration on an ad hoc basis, and in many cases, it is done manually with the help of Microsoft Excel spreadsheets. For example, a salesperson needs a report on global sales for a specific product, but the product has different product numbers in different countries. Typically, an analyst will pull all the data into Excel, manually create a cross reference for that product, and then aggregate the sales. The exact same procedure has to be followed if the same report is needed the following month. A well-defined consolidation strategy will ensure that a central cross-reference is maintained with updates in any one application being propagated to all the other systems, so that data is synchronized and up to date. This can be done in real time or in batch mode using integration technology. 4. Approximately 50 percent of respondents spend manual efforts cleansing and normalizing data. Information stored in various systems usually follows different standards and formats, making it difficult to match the data. A customer's address can be stored in different ways using a variety of abbreviations -- for example, "av" or "ave" for avenue. Similarly, a product's attributes can be stored in a number of different ways; for example, a size attribute can be stored in inches and can also be entered as "'' ". These types of variations make it difficult to match up data from different sources. Today, most customers rely on manual, heroic efforts to match, cleanse, and de-duplicate data -- clearly not a scalable, sustainable model. To solve this challenge, organizations need the ability to standardize data for customers, products, sites, suppliers and financial accounts; however, less than 10 percent of respondents have technology in place to automatically resolve duplicates. It is no wonder, therefore, that we get communications about products we don't own, at addresses we don't reside, and using channels (like direct mail) we don't like. An all-too-common example of a potential challenge follows: Customers end up receiving duplicate communications, which not only impacts customer satisfaction, but also incurs additional mailing costs. Cleansing, normalizing, and standardizing data will help address most of these issues. 5. Only 10 percent of respondents have the ability to share data that was mastered in a master data hub. Close to 60 percent of respondents have efforts in place that profile, standardize and cleanse data manually, and the output of these efforts are stored in spreadsheets in various parts of the organization. This valuable information is not easily shared with the rest of the organization and, more importantly, this enriched information cannot be sent back to the source systems so that the data is fixed at the source. A key benefit of a master data management strategy is not only to clean the data, but to also share the data back to the source systems as well as other systems that need the information. Aside from the source systems, another key beneficiary of this data is the business intelligence system. Having clean master data as input to business intelligence systems provides more accurate and enhanced reporting. Characteristics of Stellar MDM When deciding on the right master data management technology, organizations should look for solutions that have four main characteristics: enterprise-grade MDM performance complete technology that can be rapidly deployed and addresses multiple business issues end-to-end MDM process management with data quality monitoring and assurance pre-built MDM business relevant applications with data stores and workflows These master data management capabilities will aid in moving closer to a best-practice maturity level, delivering tremendous efficiencies and savings as well as revenue growth opportunities as a result of better understanding your customers. Trevor Naidoo is a senior director in Industry Strategy and Insight at Oracle.

Read the article

Easy Made Easier

- by dragonfly

How easy is it to deploy a 2 node, fully redundant Oracle RAC cluster? Not very. Unless you use an Oracle Database Appliance. The focus of this member of Oracle's Engineered Systems family is to simplify the configuration, management and maintenance throughout the life of the system, while offering pay-as-you-grow scaling. Getting a 2-node RAC cluster up and running in under 2 hours has been made possible by the Oracle Database Appliance. Don't take my word for it, just check out these blog posts from partners and end users. The Oracle Database Appliance Experience - Zip Zoom Zoom http://www.fuadarshad.com/2012/02/oracle-database-appliance-experience.html Off-the-shelf Oracle database servers http://normanweaver.wordpress.com/2011/10/10/off-the-shelf-oracle-database-servers/ Oracle Database Appliance – Deployment Steps http://marcel.vandewaters.nl/oracle/database-appliance/oracle-database-appliance-deployment-steps See how easy it is to deploy an Oracle Database Appliance for high availability with RAC? Now for the meat of this post, which is the first in a series of posts describing tips for making the deployment of an ODA even easier. The key to the easy deployment of an Oracle Database Appliance is the Appliance Manager software, which does the actual software deployment and configuration, based on best practices. But in order for it to do that, it needs some basic information first, including system name, IP addresses, etc. That's where the Appliance Manager GUI comes in to play, taking a wizard approach to specifying the information needed. Using the Appliance Manager GUI is pretty straight forward, stepping through several screens of information to enter data in typical wizard style. Like most configuration tasks, it helps to gather the required information before hand. But before you rush out to a committee meeting on what to use for host names, and rely on whatever IP addresses might be hanging around, make sure you are familiar with some of the auto-fill defaults for the Appliance Manager. I'll step through the key screens below to highlight the results of the auto-fill capability of the Appliance Manager GUI. Depending on which of the 2 Configuration Types (Config Type screen) you choose, you will get a slightly different set of screens. The Typical configuration assumes certain default configuration choices and has the fewest screens, where as the Custom configuration gives you the most flexibility in what you configure from the start. In the examples below, I have used the Custom config type. One of the first items you are asked for is the System Name (System Info screen). This is used to identify the system, but also as the base for the default hostnames on following screens. In this screen shot, the System Name is "oda". When you get to the next screen (Generic Network screen), you enter your domain name, DNS IP address(es), and NTP IP address(es). Next up is the Public Network screen, seen below, where you will see the host name fields are automatically filled in with default host names based on the System Name, in this case "oda". The System Name is also the basis for default host names for the extra ethernet ports available for configuration as part of a Custom configuration, as seen in the 2nd screen shot below (Other Network). There is no requirement to use these host names, as you can easily edit any of the host names. This does make filling in the configuration details easier and less prone to "fat fingers" if you are OK with these host names. Here is a full list of the automatically filled in host names. 1 2 1-vip 2-vip -scan 1-ilom 2-ilom 1-net1 2-net1 1-net2 2-net2 1-net3 2-net3 Another auto-fill feature of the Appliance Manager GUI follows a common practice of deploying IP Addresses for a RAC cluster in sequential order. In the screen shot below, I entered the first IP address (Node1-IP), then hit Tab to move to the next field. As a result, the next 5 IP address fields were automatically filled in with the next 5 IP addresses sequentially from the first one I entered. As with the host names, these are not required, and can be changed to whatever your IP address values are. One note of caution though, if the first IP Address field (Node1-IP) is filled out and you click in that field and back out, the following 5 IP addresses will be set to the sequential default. If you don't use the sequential IP addresses, pay attention to where you click that mouse. :-) In the screen shot below, by entering the netmask value in the Netmask field, in this case 255.255.255.0, the gateway value was auto-filled into the Gateway field, based on the IP addresses and netmask previously entered. As always, you can change this value. My last 2 screen shots illustrate that the same sequential IP address autofill and netmask to gateway autofill works when entering the IP configuration details for the Integrated Lights Out Manager (ILOM) for both nodes. The time these auto-fill capabilities save in entering data is nice, but from my perspective not as important as the opportunity to avoid data entry errors. In my next post in this series, I will touch on the benefit of using the network validation capability of the Appliance Manager GUI prior to deploying an Oracle Database Appliance.

Read the article

Updating a database connection password using a script

- by Tim Dexter

An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

Read the article

Mouse takes a while to start working after boot

- by warkior

I just recently installed Ubuntu 12.04 (64 bit) and a number of my USB devices have stopped working. At least, they don't work for the first 3-5 minutes. I have two mice (one wireless, one wired) and a camera, which seem to take Ubuntu 3-5 minutes to recognize after booting up. Eventually, they do start to work, but it takes ages! lsusb results: (when the mice are working...) $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c512 Logitech, Inc. LX-700 Cordless Desktop Receiver Bus 003 Device 003: ID 03f0:3f11 Hewlett-Packard PSC-1315/PSC-1317 Bus 006 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 006 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver syslog entries for what seems (to my very untrained eye) to be the problem: Oct 12 20:12:51 REMOVED-GA-MA785GM-US2H kernel: [ 17.420117] usb 2-3: device descriptor read/64, error -110 Oct 12 20:12:57 REMOVED-GA-MA785GM-US2H goa[1879]: goa-daemon version 3.4.0 starting [main.c:112, main()] Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.636107] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:06 REMOVED-GA-MA785GM-US2H kernel: [ 32.852122] usb 2-3: new high-speed USB device number 3 using ehci_hcd Oct 12 20:13:21 REMOVED-GA-MA785GM-US2H kernel: [ 47.964131] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.180115] usb 2-3: device descriptor read/64, error -110 Oct 12 20:13:37 REMOVED-GA-MA785GM-US2H kernel: [ 63.396126] usb 2-3: new high-speed USB device number 4 using ehci_hcd Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.804158] usb 2-3: device not accepting address 4, error -110 Oct 12 20:13:47 REMOVED-GA-MA785GM-US2H kernel: [ 73.916190] usb 2-3: new high-speed USB device number 5 using ehci_hcd Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324160] usb 2-3: device not accepting address 5, error -110 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.324197] hub 2-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: failed to claim interface Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: Failed to get parent Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:12.0/usb3/3-3 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H udev-configure-printer: MFG:hp MDL:psc 1310 series SERN:CN47CB60BJO2 serial:CN47CB60BJO2 Oct 12 20:13:58 REMOVED-GA-MA785GM-US2H kernel: [ 84.768132] usb 5-3: new full-speed USB device number 2 using ohci_hcd Oct 12 20:14:01 REMOVED-GA-MA785GM-US2H udev-configure-printer: no corresponding CUPS device found Oct 12 20:14:13 REMOVED-GA-MA785GM-US2H kernel: [ 99.904185] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.144188] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:29 REMOVED-GA-MA785GM-US2H kernel: [ 115.384178] usb 5-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:14:44 REMOVED-GA-MA785GM-US2H kernel: [ 130.520196] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 145.760179] usb 5-3: device descriptor read/64, error -110 Oct 12 20:14:59 REMOVED-GA-MA785GM-US2H kernel: [ 146.000173] usb 5-3: new full-speed USB device number 4 using ohci_hcd Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.408168] usb 5-3: device not accepting address 4, error -110 Oct 12 20:15:10 REMOVED-GA-MA785GM-US2H kernel: [ 156.544188] usb 5-3: new full-speed USB device number 5 using ohci_hcd Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952181] usb 5-3: device not accepting address 5, error -110 Oct 12 20:15:20 REMOVED-GA-MA785GM-US2H kernel: [ 166.952215] hub 5-0:1.0: unable to enumerate USB device on port 3 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.216164] usb 6-2: new low-speed USB device number 2 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-2" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 2 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396138] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input16 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.396442] generic-usb 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-2/input0 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.660187] usb 6-3: new full-speed USB device number 3 using ohci_hcd Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:13.1/usb6/6-3" Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H mtp-probe: bus: 6, device: 3 was not an MTP device Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.859045] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3/input2 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865086] input: Logitech Unifying Device. Wireless PID:400a as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.2/0003:046D:C52B.0006/input/input17 Oct 12 20:15:21 REMOVED-GA-MA785GM-US2H kernel: [ 167.865291] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:400a] on usb-0000:00:13.1-3:1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2040: invalid product id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2045: invalid serial id string ret=-1 Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 139: unable get_string_descriptor -1: Operation not permitted Oct 12 20:15:24 REMOVED-GA-MA785GM-US2H colord: io/hpmud/musb.c 2050: invalid manufacturer string ret=-1

Read the article

Building a plug-in for Windows Live Writer

- by mbcrump

This tutorial will show you how to build a plug-in for Windows Live Writer. Windows Live Writer is a blogging tool that Microsoft provides for free. It includes an open API for .NET developers to create custom plug-ins. In this tutorial, I will show you how easy it is to build one. Open VS2008 or VS2010 and create a new project. Set the target framework to 2.0, Application Type to Class Library and give it a name. In this tutorial, we are going to create a plug-in that generates a twitter message with your blog post name and a TinyUrl link to the blog post. It will do all of this automatically after you publish your post. Once, we have a new projected created. We need to setup the references. Add a reference to the WindowsLive.Writer.Api.dll located in the C:\Program Files (x86)\Windows Live\Writer\ folder, if you are using X64 version of Windows. You will also need to add a reference to System.Windows.Forms System.Web from the .NET tab as well. Once that is complete, add your “using” statements so that it looks like whats shown below: Live Writer Plug-In "Using" using System; using System.Collections.Generic; using System.Text; using WindowsLive.Writer.Api; using System.Web; Now, we are going to setup some build events to make it easier to test our custom class. Go into the Properties of your project and select Build Events, click edit the Post-build and copy/paste the following line: XCOPY /D /Y /R "$(TargetPath)" "C:\Program Files (x86)\Windows Live\Writer\Plugins\" Your screen should look like the one pictured below: Next, we are going to launch an external program on debug. Click the debug tab and enter C:\Program Files (x86)\Windows Live\Writer\WindowsLiveWriter.exe Your screen should look like the one pictured below: Now we have a blank project and we need to add some code. We start with adding the attributes for the Live Writer Plugin. Before we get started creating the Attributes, we need to create a GUID. This GUID will uniquely identity our plug-in. So, to create a GUID follow the steps in VS2008/2010. Click Tools from the VS Menu ->Create GUID It will generate a GUID like the one listed below: GUID <Guid("56ED8A2C-F216-420D-91A1-F7541495DBDA")> We only want what’s inside the quotes, so your final product should be: "56ED8A2C-F216-420D-91A1-F7541495DBDA". Go ahead and paste this snipped into your class just above the public class. Live Writer Plug-In Attributes [WriterPlugin("56ED8A2C-F216-420D-91A1-F7541495DBDA", "Generate Twitter Message", Description = "After your new post has been published, this plug-in will attempt to generate a Twitter status messsage with the Title and TinyUrl link.", HasEditableOptions = false, Name = "Generate Twitter Message", PublisherUrl = "http://michaelcrump.net")] [InsertableContentSource("Generate Twitter Message")] So far, it should look like the following: Next, we need to implement the PublishNotifcationHook class and override the OnPostPublish. I’m not going to dive into what the code is doing as you should be able to follow pretty easily. The code below is the entire code used in the project. PublishNotificationHook public class Class1 : PublishNotificationHook { public override void OnPostPublish(System.Windows.Forms.IWin32Window dialogOwner, IProperties properties, IPublishingContext publishingContext, bool publish) { if (!publish) return; if (string.IsNullOrEmpty(publishingContext.PostInfo.Permalink)) { PluginDiagnostics.LogError("Live Tweet didn't execute, due to blank permalink"); } else { var strBlogName = HttpUtility.UrlEncode("#blogged : " + publishingContext.PostInfo.Title); //Blog Post Title var strUrlFinal = getTinyUrl(publishingContext.PostInfo.Permalink); //Blog Permalink URL Converted to TinyURL System.Diagnostics.Process.Start("http://twitter.com/home?status=" + strBlogName + strUrlFinal); } } We are going to go ahead and create a method to create the short url (tinyurl). TinyURL Helper Method private static string getTinyUrl(string url) { var cmpUrl = System.Globalization.CultureInfo.InvariantCulture.CompareInfo; if (!cmpUrl.IsPrefix(url, "http://tinyurl.com")) { var address = "http://tinyurl.com/api-create.php?url=" + url; var client = new System.Net.WebClient(); return (client.DownloadString(address)); } return (url); } Go ahead and build your project, it should have copied the .DLL into the Windows Live Writer Plugin Directory. If it did not, then you will want to check your configuration. Once that is complete, open Windows Live Writer and select Tools-> Options-> Plug-ins and enable your plug-in that you just created. Your screen should look like the one pictured below: Go ahead and click OK and publish your blog post. You should get a pop-up with the following: Hit OK and It should open a Twitter and either ask for a login or fill in your status as shown below: That should do it, you can do so many other things with the API. I suggest that if you want to build something really useful consult the MSDN pages. This plug-in that I created was perfect for what I needed and I hope someone finds it useful.

Read the article

CD/DVD drive not mounted when inserted with Disc of any kind

- by Cisco Sán

I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

Read the article

Orchestrating the Virtual Enterprise

- by John Murphy

During the American Industrial Revolution, the Ford Motor Company did it all. It turned raw materials into a showroom full of Model Ts. It owned a steel mill, a glass factory, and an automobile assembly line. The company was both self-sufficient and innovative and went on to become one of the largest and most profitable companies in the world. Nowadays, it's unusual for any business to follow this vertical integration model because its much harder to be best in class across such a wide a range of capabilities and services. Instead, businesses focus on their core competencies and outsource other business functions to specialized suppliers. They exchange vertical integration for collaboration. When done well, all parties benefit from this arrangement and the collaboration leads to the creation of an agile, lean and successful "virtual enterprise." Case in point: For Sun hardware, Oracle outsources most of its manufacturing and all of its logistics to third parties. These are vital activities, but ones where Oracle doesn't have a core competency, so we shift them to business partners who do. Within our enterprise, we always retain the core functions of product development, support, and most of the sales function, because that's what constitutes our core value to our customers. This is a perfect example of a virtual enterprise. What are the implications of this? It means that we must exchange direct internal control for indirect external collaboration. This fundamentally changes the relative importance of different business processes, the boundaries of security and information sharing, and the relationship of the supply chain systems to the ERP. The challenge is that the systems required to support this virtual paradigm are still mired in "island enterprise" thinking. But help is at hand. Developments such as the Web, social networks, collaboration, and rules-based orchestration offer great potential to fundamentally re-architect supply chain systems to better support the virtual enterprise. Supply Chain Management Systems in a Virtual Enterprise Historically enterprise software was constructed to automate the ERP - and then the supply chain systems extended the ERP. They were joined at the hip. In virtual enterprises, the supply chain system needs to be ERP agnostic, sitting above each of the ERPs that are distributed across the virtual enterprise - most of which are operating in other businesses. This is vital so that the supply chain system can manage the flow of material and the related information through the multiple enterprises. It has to have strong collaboration tools. It needs to be highly flexible. Users need to be able to see information that's coming from multiple sources and be able to react and respond to events across those sources. Oracle Fusion Distributed Order Orchestration (DOO) is a perfect example of a supply chain system designed to operate in this virtual way. DOO embraces the idea that a company's fulfillment challenge is a distributed, multi-enterprise problem. It enables users to manage the process and the trading partners in a uniform way and deliver a consistent user experience while operating over a heterogeneous, virtual enterprise. This is a fundamental shift at the core of managing supply chains. It forces virtual enterprises to think architecturally about how best to construct their supply chain systems. Case in point, almost everyone has ordered from Amazon.com at one time or another. Our orders are as likely to be fulfilled by third parties as they are by Amazon itself. To deliver the order promptly and efficiently, Amazon has to send it to the right fulfillment location and know the availability in that location. It needs to be able to track status of the fulfillment and deal with exceptions. As a virtual enterprise, Amazon's operations, using thousands of trading partners, requires a very different approach to fulfillment than the traditional 'take an order and ship it from your own warehouse' model. Amazon had no choice but to develop a complex, expensive and custom solution to tackle this problem as there used to be no product solution available. Now, other companies who want to follow similar models have a better off-the-shelf choice -- Oracle Distributed Order Orchestration (DOO). Consider how another of our customers is using our distributed orchestration solution. This major airplane manufacturer has a highly complex business and interacts regularly with the U.S. Government and major airlines. It sits in the middle of an intricate supply chain and needed to improve visibility across its many different entities. Oracle Fusion DOO gives the company an orchestration mechanism so it could improve quality, speed, flexibility, and consistency without requiring an organ transplant of these highly complex legacy systems. Many retailers face the challenge of dealing with brick and mortar, Web, and reseller channels. They all need to be knitted together into a virtual enterprise experience that is consistent for their customers. When a large U.K. grocer with a strong brick and mortar retail operation added an online business, they turned to Oracle Fusion DOO to bring these entities together. Disturbing the Peace with Acquisitions Quite often a company's ERP system is disrupted when it acquires a new company. An acquisition can inject a new set of processes and systems -- or even introduce an entirely new business like Sun's hardware did at Oracle. This challenge has been a driver for some of our DOO customers. A large power management company is using Oracle Fusion DOO to provide the flexibility to rapidly integrate additional products and services into its central fulfillment operation. The Flip Side of Fulfillment Meanwhile, we haven't ignored similar challenges on the supply side of the equation. Specifically, how to manage complex supply in a flexible way when there are multiple trading parties involved? How to manage the supply to suppliers? How to manage critical components that need to merge in a tier two or tier three supply chain? By investing in supply orchestration solutions for the virtual enterprise, we plan to give users better visibility into their network of suppliers to help them drive down costs. We also think this technology and full orchestration process can be applied to the financial side of organizations. An example is transactions that flow through complex internal structures to minimize tax exposure. We can help companies manage those transactions effectively by thinking about the internal organization as a virtual enterprise and bringing the same solution set to this internal challenge. The Clear Front Runner No other company is investing in solving the virtual enterprise supply chain issues like Oracle is. Oracle is in a unique position to become the gold standard in this market space. We have the infrastructure of Oracle technology. We already have an Oracle Fusion DOO application which embraces the best of what's required in this area. And we're absolutely committed to extending our Fusion solution to other use cases and delivering even more business value.

Read the article

Atheros Wireless card shows up as two different models?

- by geermc4

Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

Read the article

Extended FindWindow

- by João Angelo

The Win32 API provides the FindWindow function that supports finding top-level windows by their class name and/or title. However, the title search does not work if you are trying to match partial text at the middle or the end of the full window title. You can however implement support for these extended search features by using another set of Win32 API like EnumWindows and GetWindowText. A possible implementation follows: using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; public class WindowInfo { private IntPtr handle; private string className; internal WindowInfo(IntPtr handle, string title) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); this.Handle = handle; this.Title = title ?? string.Empty; } public string Title { get; private set; } public string ClassName { get { if (className == null) { className = GetWindowClassNameByHandle(this.Handle); } return className; } } public IntPtr Handle { get { if (!NativeMethods.IsWindow(this.handle)) throw new InvalidOperationException("The handle is no longer valid."); return this.handle; } private set { this.handle = value; } } public static WindowInfo[] EnumerateWindows() { var windows = new List<WindowInfo>(); NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { windows.Add(new WindowInfo(hwnd, GetWindowTextByHandle(hwnd))); return true; }; bool succeeded = NativeMethods.EnumWindows(processor, IntPtr.Zero); if (!succeeded) return new WindowInfo[] { }; return windows.ToArray(); } public static WindowInfo FindWindow(Predicate<WindowInfo> predicate) { WindowInfo target = null; NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { var current = new WindowInfo(hwnd, GetWindowTextByHandle(hwnd)); if (predicate(current)) { target = current; return false; } return true; }; NativeMethods.EnumWindows(processor, IntPtr.Zero); return target; } private static string GetWindowTextByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); int length = NativeMethods.GetWindowTextLength(handle); if (length == 0) return string.Empty; var buffer = new StringBuilder(length + 1); NativeMethods.GetWindowText(handle, buffer, buffer.Capacity); return buffer.ToString(); } private static string GetWindowClassNameByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); const int WindowClassNameMaxLength = 256; var buffer = new StringBuilder(WindowClassNameMaxLength); NativeMethods.GetClassName(handle, buffer, buffer.Capacity); return buffer.ToString(); } } internal class NativeMethods { public delegate bool EnumWindowsProcessor(IntPtr hwnd, IntPtr lParam); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool EnumWindows( EnumWindowsProcessor lpEnumFunc, IntPtr lParam); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowText( IntPtr hWnd, StringBuilder lpString, int nMaxCount); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowTextLength(IntPtr hWnd); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetClassName( IntPtr hWnd, StringBuilder lpClassName, int nMaxCount); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool IsWindow(IntPtr hWnd); } The access to the windows handle is preceded by a sanity check to assert if it’s still valid, but if you are dealing with windows out of your control then the window can be destroyed right after the check so it’s not guaranteed that you’ll get a valid handle. Finally, to wrap this up a usage, example: static void Main(string[] args) { var w = WindowInfo.FindWindow(wi => wi.Title.Contains("Test.docx")); if (w != null) { Console.Write(w.Title); } }

Read the article

WIF-less claim extraction from ACS: SWT

- by Elton Stoneman

WIF with SAML is solid and flexible, but unless you need the power, it can be overkill for simple claim assertion, and in the REST world WIF doesn’t have support for the latest token formats. Simple Web Token (SWT) may not be around forever, but while it's here it's a nice easy format which you can manipulate in .NET without having to go down the WIF route. Assuming you have set up a Relying Party in ACS, specifying SWT as the token format: When ACS redirects to your login page, it will POST the SWT in the first form variable. It comes through in the BinarySecurityToken element of a RequestSecurityTokenResponse XML payload , the SWT type is specified with a TokenType of http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0 : <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust"> <t:Lifetime> <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:31:18.655Z</wsu:Created> <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:11:18.655Z</wsu:Expires> </t:Lifetime> <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"> <EndpointReference xmlns="http://www.w3.org/2005/08/addressing"> <Address>http://localhost/x.y.z</Address> </EndpointReference> </wsp:AppliesTo> <t:RequestedSecurityToken> <wsse:BinarySecurityToken wsu:Id="uuid:fc8d3332-d501-4bb0-84ba-d31aa95a1a6c" ValueType="http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> [ base64string ] </wsse:BinarySecurityToken> </t:RequestedSecurityToken> <t:TokenType>http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0</t:TokenType> <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType> <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> Reading the SWT is as simple as base-64 decoding, then URL-decoding the element value: var wrappedToken = XDocument.Parse(HttpContext.Current.Request.Form[1]); var binaryToken = wrappedToken.Root.Descendants("{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}BinarySecurityToken").First(); var tokenBytes = Convert.FromBase64String(binaryToken.Value); var token = Encoding.UTF8.GetString(tokenBytes); var tokenType = wrappedToken.Root.Descendants("{http://schemas.xmlsoap.org/ws/2005/02/trust}TokenType").First().Value; The decoded token contains the claims as key/value pairs, along with the issuer, audience (ACS realm), expiry date and an HMAC hash, which are in query string format. Separate them on the ampersand, and you can write out the claim values in your logged-in page: var decoded = HttpUtility.UrlDecode(token); foreach (var part in decoded.Split('&')) { Response.Write("<pre>" + part + "</pre> "); } - which will produce something like this: http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant=2012-08-31T06:57:01.855Z http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod=http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname=XYZ http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.microsoft.com/accesscontrolservice/2010/07/claims/identityprovider=http://fs.svc.xyz.com/adfs/services/trust Audience=http://localhost/x.y.z ExpiresOn=1346402225 Issuer=https://x-y-z.accesscontrol.windows.net/ HMACSHA256=oDCeEDDAWEC8x+yBnTaCLnzp4L6jI0Z/xNK95PdZTts= The HMAC hash lets you validate the token to ensure it hasn’t been tampered with. You'll need the token signing key from ACS, then you can re-sign the token and compare hashes. There's a full implementation of an SWT parser and validator here: How To Request SWT Token From ACS And How To Validate It At The REST WCF Service Hosted In Windows Azure, and a cut-down claim inspector on my github code gallery: ACS Claim Inspector. Interestingly, ACS lets you have a value for your logged-in page which has no relation to the realm for authentication, so you can put this code into a generic claim inspector page, and set that to be your logged-in page for any relying party where you want to check what's being sent through. Particularly handy with ADFS, when you're modifying the claims provided, and want to quickly see the results.

Read the article

Need personal advice on how to get out of a company..

- by SOfan

Hi, I am an SO user since past 6 months and this is the first time I am turning to SO for personal help. I have asked technical questions before with my real ID. I am stuck inside a service based IT company for the past one year and haven't been able to decide if to leave it, when to leave it and how to leave it. I had taken 2 weeks LWP on medical reason roughly at end of 1 year and then soon after reporting, I applied for 2 months more LWP (on medical/personal ground) with the intention of working on my health,take up a hobby class to ward off depression,pessimism, to have some fun in life, and to look for a job which I really would be excited about - that interests me and which matches with my strength. My leave starts from this Monday. So in any case, I had hard set in mind that I will leave the company after I join them back hopefully with some job offer already in hand (after figuring out what I want do). Neither I can stand the past project,past colleagues,company, HR, pathetically low salary. But if I really listen to my heart, I don't want to have to go back to that office after my sabbatical and again have to see those people. I will have to resign it after my sabbatical ends. Then HR people perhaps wont like it, may even accuse me on face or behind back that primary purpose of my leave must have been to hunt for a better job and I lied about medical and person reasons. Also, if they get nasty and force me to serve 2 months notice period. There is no way I see myself after sabbatical resuming in old project or starting new work. It will be a pain. Since they have already approved 2 months leave and stuff, ideally if they want, they should be just able to relieve me right on the next day after I join back. But, I don't know if they want to get nasty, will they mention about my 2 months sabbatical leave in my experience letter or more scary, the term medical/personal reason. I have hard earned my experience here, have worked against my will, mostly it has been painful and slogged like anything, because I realize the importance of work experience in IT industry. I don't have greed to have those 2 months included extra in my experience letter, but I don't want to mess up with my experience letter in a way which makes my next employer ask question, get suspicious, or be wary if I have any medical reason going on. Being an emotional,moody person or somebody who can't be in an environment, once my mind and heart starts hating it. I think it perhaps is best, if I resign on Monday itself telling them (in polite manner) something that look I took sabbatical for some reason but I don't want to resume working in the company after my sabbatical ends. So please accept my resignation. Now tell me what you want to do about my leave request, my notice period and when you are willing to relieve me. What should I write and how? Some background: I am working in an IT company in India.I am overqualified in the company. It is grossly underpaying me. My education qualifications far exceed anyone's in the whole company being a CS undergrad as well as a CS grad. I joined this company after finishing the grad. I had self-doubts about my skills and interest as a programmer. I like doing research oriented work, though didn't have any particular success during grad. My life here has been very hectic. The project containing many many sub-projects has kept me on my toes and I have never really liked the work. I have been playing against my strength. Also the company strict internet usage policy (you can't read gmails, can't browse any non-work related sites not even news). When working for a client, from the machine we can't even check company related emails.For this one has to go to kiosk like 5 machines in a small room etc. Most of the times those machines are not available, so it was not unusual to keep making rounds to these kiosk machines to check company emails, browse company related emails etc.So it was not so easy to keep in touch with company related basic affairs for a not particular careful person. Things like this which are new to me, make me feel restricted. I am an undecisive person with a sense of failure, self-doubt, not meeting up unrealistic expectation. Somewhere at back of mind, I envy my classmates who make a smooth transition from company to company without causing any gap in their resume. I on other hand have gaps in resume. I get tired after working in a place for sometime. problem with colleagues in general. I am not particular great with people, have few friends, not known for a fun nature, rather serious, scholar. I am not a typical conventional female. I think females are usually more disciplined. But I am not so. I reach office late (though after informing manager). I don't want to blame them entirely, because from my past, it is not unusual for me to get undecisive on things. Also I had doubts about my ability as researched and to succeed there. of building a relationship in a group, to have something to talk about, newspaper. I get cut-off from people. peer pressure. I make blunders in coding, lose patience. Consciously or unconsciously I feel contempt for people here, work here, environment here. I have doubts that either I go to a place which does innovation, does research oriented work, product biggies, have great motivated people, have competent people passionate about products they are building. But then I also doubt my ability to survive there. I have identified that an idea job for me would be 4 days a week, a high salary job. When among people in company/team, I can't think much. I need some time at home to read good authentic books written in good style on what work I am doing.So that I am comfortable with my understanding of work. I get into pressure easily under deadline and need 5th day to cool myself off. I took for 2 weeks leave, because each day was hell for me. May be the depression phase of bipolar is on and also partially it could be that being a work centered person, who derives happiness,self-esteem from work, haven't been enjoying work and have been working for the sole person of proving stability, and ability to stick, against all odds, and facing what challenges I see, bonding with people, identifying opportunities to learn in given task etc.have been averaging one day LWP in 1 week or 10 days. or may be because of my nature,ADD,not being able to switch context,out of touch with news, don't have a circle of friends with who I enjoy. less knowledge in general to talk about, just some technical stuff.anyway, so due to emotional reason, some practical reason etc, I wanted to be very sure before leaving. So my leave starts from Monday and I should feel happy about it. I have taken the leave to for a few purposes - to take care of my health by regular yoga/exercise (with project on, I just can't do anything regular), reassess myself to see what I want to try next which work I might like, look for next job, take up a hobby which I like say singing. I am not clear on my career,job aspiration. I have tried my hands on research. During this year appraisal yesterday, I even had some conflict with my last manager. In meeting with me one on one, he would say all nice things about me, but in feedback to new manager, he hasn't given any excellent feedback. It is all only good. I am angry at this old Manager. Also new manager also scolded me as I didn't agree to his appraisal and waited to hear myself from old Manager. He kind of scolded me for wasting his time. Am I being unethical somewhere? I am always very conscious of if I am cheating anywhere. What advice I am seeking? How to resign and what to write in resignation letter

Read the article

Generically correcting data before save with Entity Framework

- by koevoeter

Been working with Entity Framework (.NET 4.0) for a week now for a data migration job and needed some code that generically corrects string values in the database. You probably also have seen things like empty strings instead of NULL or non-trimmed texts ("United States ") in "old" databases, and you don't want to apply a correcting function on every column you migrate. Here's how I've done this (extending the partial class of my ObjectContext):public partial class MyDatacontext{ partial void OnContextCreated() { SavingChanges += OnSavingChanges; } private void OnSavingChanges(object sender, EventArgs e) { foreach (var entity in GetPersistingEntities(sender)) { foreach (var propertyInfo in GetStringProperties(entity)) { var value = (string)propertyInfo.GetValue(entity, null); if (value == null) { continue; } if (value.Trim().Length == 0 && IsNullable(propertyInfo)) { propertyInfo.SetValue(entity, null, null); } else if (value != value.Trim()) { propertyInfo.SetValue(entity, value.Trim(), null); } } } } private IEnumerable<object> GetPersistingEntities(object sender) { return ((ObjectContext)sender).ObjectStateManager .GetObjectStateEntries(EntityState.Added | EntityState.Modified) .Select(e => e.Entity); } private IEnumerable<PropertyInfo> GetStringProperties(object entity) { return entity.GetType().GetProperties() .Where(pi => pi.PropertyType == typeof(string)); } private bool IsNullable(PropertyInfo propertyInfo) { return ((EdmScalarPropertyAttribute)propertyInfo .GetCustomAttributes(typeof(EdmScalarPropertyAttribute), false) .Single()).IsNullable; }} Obviously you can use similar code for other generic corrections.

Read the article

Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

- by vafa

First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

Search Results

Search found 8156 results on 327 pages for 'generic relationship'.

Page 292/327 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299 | Next Page >

- by Tarek

- by dan

- by Bruno.Borges

- by rajbk

- by Ralf Westphal

- by Simon Cooper

- by D'Arcy Lussier

- by Manish Palaparthy

- by salvationishere

- by Lerp

- by Simon Cooper

- by ilan123

- by david.butler(at)oracle.com

- by dragonfly

- by Tim Dexter

- by warkior

- by mbcrump

- by Cisco Sán

- by John Murphy

- by geermc4

- by João Angelo

- by Elton Stoneman

- by SOfan

- by koevoeter

- by vafa

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299 | Next Page >