Search Results

Search found 24755 results on 991 pages for 'linux mom'.

Page 292/991 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • Install perl module with dependencies

    - by AlxAlx
    I'm trying to install a Perl module like this : pi@raspbmc:~$ sudo cpan HTTP::Date Cpan get the file Checksum is ok uncompressed successfully But I got this error : Using Tar:/bin/tar xf "HTTP-Date-6.02.tar": Couldn't untar HTTP-Date-6.02.tar: 'Cannot allocate memory' Any ideas ? My filesystem : Filesystem Size Used Avail Use% Mounted on /dev/mmcblk0p2 15G 2.1G 12G 16% / /dev/mmcblk0p1 69M 8.1M 61M 12% /boot EDIT : I tryed curl -L http://cpanmin.us | perl - App::cpanminus But when I do sudo cpanm HTTP::Date I got this error : -bash: cpanm: command not found

    Read the article

  • Differences in classic setup for Apache on Debian

    - by Elena
    Hello everybody, I recently inherited an application which uses Apache on a Debian 5 installation. I am a begginer in Apache and would have a wory since I understand that the Debian setup of Apache is not quite the classical one. I found this page which describes some differences but wondered if there are some other "gotcha"s that I should be aware of. Is that page exhaustive in explaining the differences or are there others? Thank you!

    Read the article

  • Recommendation for PHP-FPM pm.max_children, PHP-FPM pm.start_servers and others

    - by jaypabs
    I have the following server: Intel® Xeon® E3-1270 v2 Single Processor - Quad Core Dedicated Server CPU Speed: 4 x 3.5 Ghz w/ 8MB Smart Cache Motherboard: SuperMicro X9SCM-F Total Cores: 4 Cores + 8 Threads RAM: 32 GB DDR3 1333 ECC Hard Drive: 120GB Smart Cache: 8MB I am using ubuntu 12.04 - nginx, php, mysql with ISPConfig 3. Under ISPConfig 3 website settings: I have this default value: PHP-FPM pm.max_children = 10 PHP-FPM pm.start_servers = 2 PHP-FPM pm.min_spare_servers = 1 PHP-FPM pm.max_spare_servers = 5 PHP-FPM pm.max_requests = 0 My question is what is the recommended settings for the above variable? Because I found some using a different settings.

    Read the article

  • Ubuntu 9 & 10 ignore .xinitrc?

    - by JSW
    In Ubuntu 9.x, 10.x, the .xinitrc file is apparently not used. So, where do you put your xinit stuff? Note: asking this here, answering it myself, in light of http://serverfault.com/questions/87156/ubuntu-karmic-ignores-xinitrc

    Read the article

  • Problem with apache + ssl: length mismatch error and ocasional bad request

    - by Ruben Garat
    we migrated a server from slicehost to linode recently, we copied the config from one server to the other. Everything works perfectly except that we get: Occasional errors with "Bad Request", this error is not common, you can use it all day and not see it, and the next day it will happen a lot. apart from that, a lot of the time, event though the request works fine we get some errors. using ssldump we get: New TCP connection #1: myip(39831) <-> develserk(443) 1 1 0.2316 (0.2316) C>S SSLv2 compatible client hello Version 3.1 cipher suites Unknown value 0x39 Unknown value 0x38 Unknown value 0x35 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA SSL2_CK_3DES Unknown value 0x33 Unknown value 0x32 Unknown value 0x2f SSL2_CK_RC2 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 SSL2_CK_RC4 TLS_DHE_RSA_WITH_DES_CBC_SHA TLS_DHE_DSS_WITH_DES_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA SSL2_CK_DES TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 SSL2_CK_RC2_EXPORT40 TLS_RSA_EXPORT_WITH_RC4_40_MD5 SSL2_CK_RC4_EXPORT40 1 2 0.2429 (0.0112) S>C Handshake ServerHello Version 3.1 session_id[32]= 9a 1e ae c4 5f df 99 47 97 40 42 71 97 eb b9 14 96 2d 11 ac c0 00 15 67 4e f3 7d 65 4e c4 30 e9 cipherSuite Unknown value 0x39 compressionMethod NULL 1 3 0.2429 (0.0000) S>C Handshake Certificate 1 4 0.2429 (0.0000) S>C Handshake ServerKeyExchange 1 5 0.2429 (0.0000) S>C Handshake ServerHelloDone 1 6 0.4965 (0.2536) C>S Handshake ClientKeyExchange 1 7 0.4965 (0.0000) C>S ChangeCipherSpec 1 8 0.4965 (0.0000) C>S Handshake 1 9 0.5040 (0.0075) S>C ChangeCipherSpec 1 10 0.5040 (0.0000) S>C Handshake ERROR: Length mismatch from the apache error.log [Fri Aug 27 14:50:05 2010] [debug] ssl_engine_io.c(1892): OpenSSL: I/O error, 5 bytes expected to read on BIO#b80c1e70 [mem: b8100918] the server is ubuntu 10.04.1 the apache version is 2.2.14-5ubuntu8 the openssl version is 0.9.8k-7ubuntu8

    Read the article

  • aide --init show lots of errors

    - by newbie14
    I have a brand new centos 6.2 server. The first thing I did is yum -y install aide and then next I did aide --init. Below is a whole lot of errors I got.What does it means must I reinstall it? Or leave it ? /usr/sbin/prelink: /usr/sbin/lusermod: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/console-kit-daemon: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/NetworkManager: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/rtacct: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/tcpdump: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/dnsmasq: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/getsebool: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ownership: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/modem-manager: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pluginviewer: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sasl2-shared-mechlist: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ifdhandler: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/mklost+found: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/vpddecode: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/skdump: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/getpcaps: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lpasswd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/tmpwatch: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ck-log-system-stop: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/alternatives: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/avahi-daemon: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/dump-acct: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/luseradd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/nstat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/efibootmgr: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sasldblistusers2: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/e2freefrag: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sa: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lgroupadd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ss: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/dmidecode: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sktest: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/fdformat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/saslpasswd2: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/selinuxenabled: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pppstats: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/wpa_supplicant: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/capsh: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/togglesebool: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/kppp: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lgroupmod: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/cracklib-unpacker: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/getcap: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/avcstat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lnstat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/filefrag: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lid: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/bonobo-activation-sysconf: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lockdev: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/mcelog: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/cifs.upcall: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pcscd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/brctl: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/logrotate: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/wpa_passphrase: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pppdump: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lsof: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ck-log-system-start: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/setcap: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/rtkitctl: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/latencytop: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/wpa_cli: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/saned: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process

    Read the article

  • SSL23_WRITE:ssl handshake failure:s23_lib.c:177

    - by Armin
    When attempting to connect to an xmpp server over SSL, openssl fails with the following error: 3071833836:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177 I believe that the server uses the RC4-MD5 cipher, here is the full output: [root@localhost ~]# openssl s_client -connect 184.106.52.124:5222 -cipher RC4-MD5 CONNECTED(00000003) >>> SSL 2.0 [length 0032], CLIENT-HELLO 01 03 03 00 09 00 00 00 20 00 00 04 01 00 80 00 00 ff b0 c9 c2 3f 0b 0e 98 df b4 dc fe b7 e8 8f 17 9a 34 b5 9b 17 1b 2b ac 01 dc bd 2b a9 2d 18 44 0c 3071866604:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 52 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- Using gnutls-cli: [root@localhost ~]# gnutls-cli 184.106.52.124 -p 5222 Resolving '184.106.52.124'... Connecting to '184.106.52.124:5222'... *** Fatal error: A TLS packet with unexpected length was received. *** Handshake has failed GNUTLS ERROR: A TLS packet with unexpected length was received. Connecting to the same server on port 5223 works fine. Using OpenSSL 1.0.1e-fips on CentOS 6.5 and OpenSSL 1.0.1f on Ubuntu 14.04.1 Any tips on how to troubleshoot this? Thanks in advance.

    Read the article

  • DNS Query.log - Multiple query’s for ripe.net

    - by Christopher Wilson
    Currently I run a DNS server (bind9) that handles queries from clients over the internet lately I have noticed hundreds of queries from all different address's that look like this (Server IP removed) client 216.59.33.210#53: query: ripe.net IN ANY +ED (0.0.0.0) client 216.59.33.204#53: query: ripe.net IN ANY +ED (0.0.0.0) client 208.64.127.5#53: query: ripe.net IN ANY +ED (0.0.0.0) client 184.107.255.202#53: query: ripe.net IN ANY +ED (0.0.0.0) client 208.64.127.5#53: query: ripe.net IN ANY +ED (0.0.0.0) client 208.64.127.5#53: query: ripe.net IN ANY +ED (0.0.0.0) client 205.204.65.83#53: query: ripe.net IN ANY +ED (0.0.0.0) client 69.162.110.106#53: query: ripe.net IN ANY +ED (0.0.0.0) client 216.59.33.210#53: query: ripe.net IN ANY +ED (0.0.0.0) client 69.162.110.106#53: query: ripe.net IN ANY +ED (0.0.0.0) client 216.59.33.204#53: query: ripe.net IN ANY +ED (0.0.0.0) client 208.64.127.5#53: query: ripe.net IN ANY +ED (0.0.0.0) Can someone please explain why there are so many clients querying for ripe.net ?

    Read the article

  • NFS to NFS mount

    - by dude
    I have a machine that I need to bridge NFS files to. Can I mount an NFS directory on machine2 from machine1 and then mount the mounted NFS directory on machine2 on machine3 via NFS? Do you see any problems with that? I am basically bridging some subnet domains this way, in a certain fashion. My development machine is on a different and separate (unbridged) than where I would like to use the files, and I would like this machine1(dev machine) - machine2(passthrough machine) - machine3(test machine) connection. And no there is no way to move the test machine as it's a chassis :) and it's two buildings away.

    Read the article

  • Why does my Intel HDA onboard sound card not have a "Mix" device / channel?

    - by Hanno Fietz
    I want to be able to record what my sound card outputs on the speakers / headphones. This question is all over the interwebs again and again, and there seem to be two outcomes: in your selection of audio input devices, there's a device called "Stereo Mix", or similar, which is the "loopback" device for audio. Choose that in your recording tool and you're done. there's no such device and only speculative posts about why that may be. Now, I'm using ALSA and an Intel HDA chipset on my mainboard under Kubuntu Karmic. I have some 5-10 output channels and "Mic", "Front Mic" and "Line" for input. All of those are available in KMix, Audacity and other software. No "loopback" / "Mix" / whatever. Do I have to get some driver / kernel module set up ALSA in some way set up my system configuration in some way use a software solution (such as JACK) I had a look at JACK, and found it rather hard to understand, it's either an expert tool or just clumsy, I couldn't say. At least, I wasn't able to figure out how to achieve what I wanted. One of my problems seems to be that I don't understand where and how the mixing happens. Are there sound cards which just aren't able to do it? Why does the sound card matter at all, since I could in theory grab the data stream at some point before it goes to the hardware, right?

    Read the article

  • Globe SSL with NGINX SSL certificate problem, please help

    - by PartySoft
    I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

    Read the article

  • sudo apt-key adv --keyserver keyserver.ubuntu.com --recv 7F0CEB10 command returns error

    - by nyamka
    I'm trying to install Mongodb on Ubuntu 12 but when I run this command: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv 7F0CEB10 This returned the error below: keyserver.ubuntu.com host not found gpgkeys: HTTP fetch error 7: couldn't connect: no such file or directory gpg:no valid openPGP data found gpg: Total number processes :0 I turned off Firewall on Iptables, but it don't work. Is there any idea?

    Read the article

  • Apache2 with SSL and mod_jk on SUSE Linux Enterprise | Apache always starts SSL disabled

    - by Shaakunthala
    I have installed Apache2 (with mod_ssl enabled) on SUSE Linux Enterprise Server 11 (x86_64) (patchlevel 1), using YaST. Once installed, I tested whether everything works fine so far. SSL also worked fine. Just 'apache2ctl start' was enough to make everything working. Then I installed mod_jk and applied the following configuration changes to make it work. /etc/sysconfig/apache2 (added JK module) APACHE_MODULES="... ... ... ... ...jk" /etc/apache2/httpd.conf (included mod_jk.conf) Include /etc/apache2/mod_jk.conf /etc/apache2/mod_jk.conf (new file) JkLogFile /var/log/apache2/mod_jk.log JkWorkersFile /etc/apache2/mod_jk/workers.properties JkShmFile /etc/apache2/mod_jk/mod_jk.shm # Set the jk log level [debug/error/info] JkLogLevel info # Select the timestamp log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " mod_jk.log & mod_jk.shm files were also created. /etc/apache2/mod_jk/workers.properties (new file) worker.list=jira worker.jira.type=ajp13 worker.jira.host=127.0.0.1 worker.jira.port=8009 Once everything is done, I've restarted Apache using the following command, apache2ctl restart Then I observed that SSL is not working. When checked with telnet, I observed that port 443 is not open. In listen.conf, if I specify port 443 bypassing 'IfDefine' and 'IfModule' conditions, then SSL works properly. This is likely the 'SSL' flag is not passed to Apache. I did not make this a persistent change as I thought it might not be the correct practice. I checked /etc/sysconfig/apache2 to see if this has been altered, but it is there. Although this flag is enabled, Apache won't start with SSL support. APACHE_SERVER_FLAGS="SSL" Finally, I had to start Apache using the following command, apache2ctl -D SSL -k start And my question is, why did Apache (or apache2ctl) fail to start with SSL when I have installed and correctly configured mod_jk, and no other configuration changes were applied? Have I missed anything? Thanks in advance. -- Shaakunthala

    Read the article

  • Send email from server to Google Apps email address (same domains)

    - by Orlando
    I'm sending email from a server, let's say domain.com. I also have Google Apps email set up for hosted email, same domain, domain.com. If I get mail sent to me from anywhere else, I receive things just fine. However, if the email originates from my server, it just ends up in /var/mail/root as a delivery error saying the user is unknown. I created a user on the server for the name which is having trouble, [email protected]. Retried sending and it sends, but not to my hosted email at Google Apps. I just receive it at /var/mail/webmaster now. I'm using sendmail. I messed around with /etc/aliases but adding webmaster: [email protected] looked useless (and I was right.) Any help?

    Read the article

  • "power limit notification" clobbering on 12G Dell servers with RHEL6

    - by Andrew B
    Server: Poweredge r620 OS: RHEL 6.4 Kernel: 2.6.32-358.18.1.el6.x86_64 I'm experiencing application alarms in my production environment. Critical CPU hungry processes are being starved of resources and causing a processing backlog. The problem is happening on all the 12th Generation Dell servers (r620s) in a recently deployed cluster. As near as I can tell, instances of this happening are matching up to peak CPU utilization, accompanied by massive amounts of "power limit notification" spam in dmesg. An excerpt of one of these events: Nov 7 10:15:15 someserver [.crit] CPU12: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU6: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU14: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Package power limit notification (total events = 11) Nov 7 10:15:15 someserver [.crit] CPU6: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU14: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU20: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Package power limit notification (total events = 12) Nov 7 10:15:15 someserver [.crit] CPU10: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU20: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU10: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU15: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU3: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU1: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU5: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU15: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU3: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU1: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU5: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU19: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Package power limit notification (total events = 377) Nov 7 10:15:15 someserver [.crit] CPU9: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU21: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU23: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU11: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU19: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU9: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU21: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU23: Package power limit notification (total events = 374) A little Google Fu reveals that this is typically associated with the CPU running hot, or voltage regulation kicking in. I don't think that's what is happening though. Temperature sensors for all servers in the cluster are running fine, Power Cap Policy is disabled in the iDRAC, and my System Profile is set to "Performance" on all of these servers: # omreport chassis biossetup | grep -A10 'System Profile' System Profile Settings ------------------------------------------ System Profile : Performance CPU Power Management : Maximum Performance Memory Frequency : Maximum Performance Turbo Boost : Enabled C1E : Disabled C States : Disabled Monitor/Mwait : Enabled Memory Patrol Scrub : Standard Memory Refresh Rate : 1x Memory Operating Voltage : Auto Collaborative CPU Performance Control : Disabled A Dell mailing list post describes the symptoms almost perfectly. Dell suggested that the author try using the Performance profile, but that didn't help. He ended up applying some settings in Dell's guide for configuring a server for low latency environments and one of those settings (or a combination thereof) seems to have fixed the problem. Kernel.org bug #36182 notes that power-limit interrupt debugging was enabled by default, which is causing performance degradation in scenarios where CPU voltage regulation is kicking in. A RHN KB article (RHN login required) mentions a problem impacting PE r620 and r720 servers not running the Performance profile, and recommends an update to a kernel released two weeks ago. ...Except we are running the Performance profile... Everything I can find online is running me in circles here. What's the heck is going on?

    Read the article

  • Can't install Perl DBD module on Ubuntu (for Bugzilla)

    - by Mara
    Trying to install bugzilla-4.2.2 on Ubuntu 12.04. When I run checksetup.pl I get the following error: YOU MUST RUN ONE OF THE FOLLOWING COMMANDS (depending on which database you use): PostgreSQL: /usr/bin/perl install-module.pl DBD::Pg MySQL: /usr/bin/perl install-module.pl DBD::mysql SQLite: /usr/bin/perl install-module.pl DBD::SQLite Oracle: /usr/bin/perl install-module.pl DBD::Oracle To attempt an automatic install of every required and optional module with one command, do: /usr/bin/perl install-module.pl --all I have installed MySQL via XAMPP so I run: /urs/bin/perl install-module.pl DBD::mysql And get the following error: perl Makefile.PL --testuser=username Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Can't exec "mysql_config": No such file or directory at Makefile.PL line 479. Can't find mysql_config. Use --mysql_config option to specify where mysql_config is located Failed to determine directory of mysql.h. Use perl Makefile.PL --cflags=-I<dir> to set this directory. For details see the INSTALL.html file, section "C Compiler flags" or type perl Makefile.PL --help Warning: No success on command[/usr/bin/perl Makefile.PL LIB="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib" INSTALLMAN1DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man1" INSTALLMAN3DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man3" INSTALLBIN="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLSCRIPT="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLDIRS=perl] CAPTTOFU/DBD-mysql-4.021.tar.gz /usr/bin/perl Makefile.PL LIB="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib" INSTALLMAN1DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man1" INSTALLMAN3DIR="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/man/man3" INSTALLBIN="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLSCRIPT="/opt/lampp/htdocs/bugzilla/4.2.2/bugzilla-4.2.2/lib/bin" INSTALLDIRS=perl -- NOT OK Skipping test because of notest pragma Running make install Make had some problems, won't install Could not read metadata file. Falling back to other methods to determine prerequisites So then I tried checksetup.pl's suggestion and ran: /usr/bin/perl install-module.pl --all And it seems to have installed DBD::SQLite without any problems, but again I see a warning that says it's skipping tests because of notest pragma. When I re-run checksetup.pl It shows 3 of the 4 original DB drivers in the "not found" list: PostgreSQL: /usr/bin/perl install-module.pl DBD::Pg MySQL: /usr/bin/perl install-module.pl DBD::mysql Oracle: /usr/bin/perl install-module.pl DBD::Oracle So running it with --all seems to have installed the SQLite driver without any problems, but for some reason I can't seem to install the MySQL driver. Again I need MySQL because thats what XAMPP uses and because I prefer MySQL regardless. I have a feeling it has something to do with this notest pragma error. Any ideas? Thanks in advance!

    Read the article

  • How to start networking on a wired interface before logon in Ubuntu Desktop Edition

    - by Burly
    Problem Ubuntu 9.10 Desktop Edition (and possibly previous versions as well, I haven't tested them) has no network connections after boot until at least 1 user logs in. This means any services that require networking (e.g. openssh-server) are not available until someone logs in locally either via gdm, kdm, or a TTY. Background Ubuntu 9.10 Desktop Edition uses the NetworkManager service to take commands from the nm-applet in Gnome (or it's equivalent in KDE). As I understand it, while NetworkManager is running at boot, it is not issued any commands to connect until you login for the first time because nm-applet isn't running until you login and your Gnome session starts (or similar for KDE). I'm not sure what prompts NetworkManager to connect to the network when you login via a TTY. There are several relevant variables involved in starting up the network connections including: Wired vs Wireless (and the resulting drivers, SSID, passwords, and priorities) Static vs DHCP Multiple interfaces Constraints Support Ubuntu 9.10 Karmic Koala (bonus points for additional supported versions) Support wired eth0 interface Receive an IP address via DHCP Receive DNS information via DHCP (obviously the DHCP server must provide this information) Enable networking at the proper time (e.g. some time after file systems are loaded but before network services like ssh start) Switching distros or versions (e.g. to Server Edition) is not an acceptable solution Switching to a Static IP configuration is not an acceptable solution Question How to start networking on a wired interface before logon in Ubuntu Desktop Edition? What I have tried Per this guide, adding the following entry into /etc/network/interfaces so that NetworkManager won't manage the eth0 interface: auth eth0 iface inet dhcp After reboot eth0 is down. Issuing ifconfig eth0 up brings the interface up but it receives no IP address. Issuing dhclient eth0 instead Does bring up the interface and it Does receive an IP address. Completely removing the NetworkManager package in addition to the settings above. I'm a bit confused with the whole UpStart/SysVinit mangling that's going in Ubuntu currently (I'm more familiar with the CentOS world). However, directly issuing sudo /etc/init.d/networking start Or sudo start networking does not bring up the eth0 interface at all, much less get an IP address. See-Also How to force NetworkManager to make a connection before login? References Ubuntu Desktop Edition Ubuntu Networking Configuration Using Command Line Automatic Network Configuration Via Command-Line Start network connection before login

    Read the article

  • VMware Workstation Error: Cannot find a valid peer process

    - by Robert Claypool
    I am running VMware Workstation 6.1.5 (build-126130) on CentOS 5.3 (Final). One of the guest machines is reporting an error when I try to power on the most recent snapshot. Snapshots further back in the timeline will power on without any problem. Error: Unable to change virtual machine power state: Cannot find a valid peer process to connect to. Apparently I'm not the only one with this problem. Others have been reporting it since at least early 2005. The forums say to delete unused lock files and restart any hung VMware processes (or restart the host machine), which I have done. Still no luck. Any other ideas?

    Read the article

  • XRDP errors when trying to use sesman-x11rdp

    - by Nicholas
    I've just installed Ubuntu 11.10 Desktop on an old laptop of mine and I wanted to set it up so I could remote into it from my windows desktop. I've installed XRDP, but when I attempt to login using sesman-x11rdp it logs in, then the window shuts down. I've checked over the logs and here is what I get at the time of login: [20120123-16:49:23] [INFO ] scp thread on sck 8 started successfully [20120123-16:49:23] [INFO ] granted TS access to user nicholas [20120123-16:49:24] [INFO ] starting X11rdp session... [20120123-16:49:24] [CORE ] error starting X server - user nicholas - pid 3869 [20120123-16:49:24] [DEBUG] errno: 2, description: No such file or directory [20120123-16:49:24] [DEBUG] execve parameter list: 11 [20120123-16:49:24] [DEBUG] argv[0] = X11rdp [20120123-16:49:24] [DEBUG] argv[1] = :11 [20120123-16:49:24] [DEBUG] argv[2] = -geometry [20120123-16:49:24] [DEBUG] argv[3] = 1280x720 [20120123-16:49:24] [DEBUG] argv[4] = -depth [20120123-16:49:24] [DEBUG] argv[5] = 16 [20120123-16:49:24] [DEBUG] argv[6] = -bs [20120123-16:49:24] [DEBUG] argv[7] = -ac [20120123-16:49:24] [DEBUG] argv[8] = -nolisten [20120123-16:49:24] [DEBUG] argv[9] = tcp [20120123-16:49:25] [DEBUG] argv[10] = (null) [20120123-16:49:34] [ERROR] X server for display 11 startup timeout [20120123-16:49:34] [ERROR] X server for display 11 startup timeout [20120123-16:49:34] [INFO ] starting xrdp-sessvc - xpid=3869 - wmpid=3868 [20120123-16:49:34] [ERROR] another Xserver is already active on display 11 [20120123-16:49:34] [DEBUG] aborting connection... [20120123-16:49:34] [INFO ] session 3867 - user nicholas - terminated Can anyone point me to the proper way to get this working with x11rdp?

    Read the article

  • ERROR 2002 (HY000): Can’t connect to local MySQL server through socket ‘/tmp/mysql.sock’ (2)

    - by Imran
    Can someone please help as i've spent all day trying to fix this. I installed the latest XAMPP and now i can't connect to mysql from terminal.I checked my .profile file and the PATH seems ok. Does anyone know whats happened and what's the solution? PATH=$PATH:/Applications/XAMPP/xamppfiles/bin export PATH THIS IS A PROGRAMMING QUESTION AS I'M A PHP DEVELOPER TRYING TO DO MY JOB! Thankyou soo much in advance;-)

    Read the article

  • Fix ACPI DSDT of Amilo Pa 1538

    - by kayahr
    I have a Fujitsu-Siemens Amilo Pa 1538 laptops and installed Ubuntu 10.04 on it (Kernel 2.6.32). Main problem is that the fans of the notebook are always on even when the temperature is low. Another problem is that the display brightness can not be adjusted. Since some years I use Dell laptops and never experienced any ACPI problems so I thought that it is no longer needed to fix ACPI tables but now I have this crap of a laptop and I think I have to do it. Unfortunately I need some help repairing the DSDT. The dsdt.dat and dsdt.dsl of the laptop can be found here: http://www.ailis.de/~k/permdata/20100420/dsdt/ Compiling the DSDT gives the following output: # iasl -sa dsdt.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20090521 [Jun 30 2009] Copyright (C) 2000 - 2009 Intel Corporation Supports ACPI Specification Revision 3.0a dsdt.dsl 81: Method (\_WAK, 1, NotSerialized) Warning 1080 - ^ Reserved method must return a value (_WAK) dsdt.dsl 207: Method (_L10, 0, NotSerialized) Warning 1087 - ^ Not all control paths return a value (_L10) dsdt.dsl 2861: Method (NVIF, 3, NotSerialized) Warning 1087 - ^ Not all control paths return a value (NVIF) dsdt.dsl 4551: Store (\_SB.PCI0.LPC0.PMRD (0xFA), Local0) Warning 1099 - Statement is unreachable ^ ASL Input: dsdt.dsl - 4962 lines, 162828 bytes, 2300 keywords AML Output: dsdt.aml - 17627 bytes, 591 named objects, 1709 executable opcodes Compilation complete. 0 Errors, 4 Warnings, 0 Remarks, 519 Optimizations Anyone here with DSDT experience who can help me fixing the DSDT?

    Read the article

  • Apache2 Startup warning: NameVirtualHost *:80 has no VirtualHosts

    - by Kit Roed
    When my Ubuntu Apache server (apache2) starts up I get a warning message that reads: [warn] NameVirtualHost *:80 has no VirtualHosts however, the web server is working fine... could anyone explain what I might have wrong in my site's configuration to make it give me this warning? the config file in question (located in /etc/apache2/sites-available) reads like this (details removed for brevity) <VirtualHost *> <Location /mysite> # config details here... </Location> # use the following for authorization <LocationMatch "/mysite/login"> AuthType Basic AuthName "My Site" AuthUserFile /etc/sitepasswords/passwd Require valid-user </LocationMatch> </VirtualHost> Could the fact that I'm using <Location> be a part of the problem?

    Read the article

  • Trouble with dns and debian update

    - by Sean
    I tried to update my debian dreamplug server with the command running as root apt-get update and recieved these errors. Err http://security.debian.org lenny/updates Release.gpg Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/main Translation-en_US Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/contrib Translation-en_US Could not resolve 'security.debian.org' Err htdtp://security.debian.org lenny/updates/non-free Translation-en_US Could not resolve 'security.debian.org' Err httdp://www.backports.org lenny-backports Releasegpg Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/main Translation-en_US Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/contrib Translation-en_US Could not resolve 'www.backports.org' Err httdp://www.backports.org lenny-backports/non-free Translation-en_US Could not resolve 'www.backports.org' Err httdp://ftp.us.debian.org lenny Release.gpg Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/main Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/contrib Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://ftp.us.debian.org lenny/non-free Translation-en_US Could not resolve 'ftp.us.debian.org' Err httdp://http.us.debian.org stable Release.gpg Could not resolve 'http.us.debian.org' Err htdtp://http.us.debian.org stable/main Translation-en_US Could not resolve 'http.us.debian.org' Err httdp://http.us.debian.org stable/contrib Translation-en_US Could not resolve 'http.us.debian.org' Err htdtp://http.us.debian.org stable/non-free Translation-en_US Could not resolve 'http.us.debian.org' Reading package lists... Done W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/Release.gpg Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/main/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/contrib/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://ftp.us.debian.org/debian/dists/lenny/non-free/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/Release.gpg Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/main/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/contrib/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://http.us.debian.org/debian/dists/stable/non-free/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/Release.gpg Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/main/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/contrib/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://security.debian.org/dists/lenny/updates/non-free/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/Release.gpg Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/main/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/contrib/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch ttp://www.backports.org/debian/dists/lenny-backports/non-free/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems I am able to ping ip addresses but not namespaces. Can't seem to figure out the problem. My /etc/resolv.conf file contains nameserver 192.168.1.2 which is my router.

    Read the article

  • Pecl complies .so extensions for OSX built-in PHP and not MAMP

    - by Camsoft
    I've installed the sphinx binaries and libraries and am now trying to install the PECL sphinx module. My system is running OS X 10.6 with MAMP 1.8.2 installed. I try to install sphinx using the following command: sudo pecl install sphinx The PECL command outputs the following: running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 The versions above don't match the versions listed when doing a phpinfo(). It seems that PECL is trying to complie against the built-in version of PHP. If I ignore the errors and continue the it will successfully compile and place the sphinx.so file in: /usr/lib/php/extensions/no-debug-non-zts-20090626/sphinx.so when in fact it should be: /Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/ I've tried copying the sphinx.so file to the MAMP extensions dir but when I restart apache PHP displays the following warning: PHP Startup: Unable to load dynamic library '/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/sphinx.so I think this is because MAMP is 32bit and the built-in PHP is 64bit so PECL complies for 64bit. I might be completely wrong but I did read this when I goggled on the topic. Does anyone know how to get PECL to map to the MAMP version of PHP instead of the built-in version?

    Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >