Search Results

Search found 7526 results on 302 pages for 'week in geek'.

Page 292/302 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • Contracting as a Software Developer in the UK

    - by Frez
    Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Having had some 15 years’ experience of working as a software contractor, I am often asked by developers who work as permanent employees (permies) about the pros and cons of working as a software consultant through my own limited company and whether the move would be a good one for them. Whilst it is possible to contract using other financial vehicles such as umbrella companies, this article will only consider limited companies as that is what I have experience of using. Contracting or consultancy requires a different mind-set from being a permanent member of staff, and not all developers are capable of this shift in attitude. Whilst you can look forward to an increase in the money you take home, there are real risks and expenses you would not normally be exposed to as a permie. So let us have a look at the pros and cons: Pros: More money There is no doubt that whilst you are working on contracts you will earn significantly more than you would as a permanent employee. Furthermore, working through a limited company is more tax efficient. Less politics You really have no need to involve yourself in office politics. When the end of the day comes you can go home and not think or worry about the power struggles within the company you are contracted to. Your career progression is not tied to the company. Expenses from gross income All your expenses of trading as a business will come out of your company’s gross income, i.e. before tax. This covers travelling expenses provided you have not been at the same client/location for more than two years, internet subscriptions, professional subscriptions, software, hardware, accountancy services and so on. Cons: Work is more transient Contracts typically range from a couple of weeks to a year, although will most likely start at 3 months. However, most contracts are extended either because the project you have been brought in to help with takes longer to deliver than expected, the client decides they can use you on other aspects of the project, or the client decides they would like to use you on other projects. The temporary nature of the work means that you will have down-time between contracts while you secure new opportunities during which time your company will have no income. You may need to attend several interviews before securing a new contract. Accountancy expenses Your company is a separate entity and there are accountancy requirements which, unless you like paperwork, means your company will need to appoint an accountant to prepare your company’s accounts. It may also be worth purchasing some accountancy software, so talk to your accountant about this as they may prefer you to use a particular software package so they can integrate it with their systems. VAT You will need to register your company for VAT. This is tax neutral for you as the VAT you charge your clients you will pass onto the government less any VAT you are reclaiming from expenses, but it is additional paperwork to undertake each quarter. It is worth checking out the Fixed Rate VAT Scheme that is available, particularly after the initial expenses of setting up your company are over. No training Clients take you on based on your skills, not to train you when they will lose that investment at the end of the contract, so understand that it is unlikely you will receive any training funded by a client. However, learning new skills during a contract is possible and you may choose to accept a contract on a lower rate if this is guaranteed as it will help secure future contracts. No financial extras You will have no free pension, life, accident, sickness or medical insurance unless you choose to purchase them yourself. A financial advisor can give you all the necessary advice in this area, and it is worth taking seriously. A year after I started as a consultant I contracted a serious illness, this kept me off work for over two months, my client was very understanding and it could have been much worse, so it is worth considering what your options might be in the case of illness, death and retirement. Agencies Whilst it is possible to work directly for end clients there are pros and cons of working through an agency.  The main advantage is cash flow, you invoice the agency and they typically pay you within a week, whereas working directly for a client could have you waiting up to three months to be paid. The downside of working for agencies, especially in the current difficult times, is that they may go out of business and you then have difficulty getting the money you are owed. Tax investigation It is possible that the Inland Revenue may decide to investigate your company for compliance with tax law. Insurance is available to cover you for this. My personal recommendation would be to join the PCG as this insurance is included as a benefit of membership, Professional Indemnity Some agencies require that you are covered by professional indemnity insurance; this is a cost you would not incur as a permie. Travel Unless you live in an area that has an abundance of opportunities, such as central London, it is likely that you will be travelling further, longer and with more expense than if you were permanently employed at a local company. This not only affects you monetarily, but also your quality of life and the ability to keep fit and healthy. Obtaining finance If you want to secure a mortgage on a property it can be more difficult or expensive, especially if you do not have three years of audited accounts to show a mortgage lender.   Caveat This post is my personal opinion and should not be used as a definitive guide or recommendation to contracting and whether it is suitable for you as an individual, i.e. I accept no responsibility if you decide to take up contracting based on this post and you fare badly for whatever reason.

    Read the article

  • Grow Your Business with Security

    - by Darin Pendergraft
    Author: Kevin Moulton Kevin Moulton has been in the security space for more than 25 years, and with Oracle for 7 years. He manages the East EnterpriseSecurity Sales Consulting Team. He is also a Distinguished Toastmaster. Follow Kevin on Twitter at twitter.com/kevin_moulton, where he sometimes tweets about security, but might also tweet about running, beer, food, baseball, football, good books, or whatever else grabs his attention. Kevin will be a regular contributor to this blog so stay tuned for more posts from him. It happened again! There I was, reading something interesting online, and realizing that a friend might find it interesting too. I clicked on the little email link, thinking that I could easily forward this to my friend, but no! Instead, a new screen popped up where I was asked to create an account. I was expected to create a User ID and password, not to mention providing some personally identifiable information, just for the privilege of helping that website spread their word. Of course, I didn’t want to have to remember a new account and password, I didn’t want to provide the requisite information, and I didn’t want to waste my time. I gave up, closed the web page, and moved on to something else. I was left with a bad taste in my mouth, and my friend might never find her way to this interesting website. If you were this content provider, would this be the outcome you were looking for? A few days later, I had a similar experience, but this one went a little differently. I was surfing the web, when I happened upon some little chotcke that I just had to have. I added it to my cart. When I went to buy the item, I was again brought to a page to create account. Groan! But wait! On this page, I also had the option to sign in with my OpenID account, my Facebook account, my Yahoo account, or my Google Account. I have all of those! No new account to create, no new password to remember, and no personally identifiable information to be given to someone else (I’ve already given it all to those other guys, after all). In this case, the vendor was easy to deal with, and I happily completed the transaction. That pleasant experience will bring me back again. This is where security can grow your business. It’s a differentiator. You’ve got to have a presence on the web, and that presence has to take into account all the smart phones everyone’s carrying, and the tablets that took over cyber Monday this year. If you are a company that a customer can deal with securely, and do so easily, then you are a company customers will come back to again and again. I recently had a need to open a new bank account. Every bank has a web presence now, but they are certainly not all the same. I wanted one that I could deal with easily using my laptop, but I also wanted 2-factor authentication in case I had to login from a shared machine, and I wanted an app for my iPad. I found a bank with all three, and that’s who I am doing business with. Let’s say, for example, that I’m in a regular Texas Hold-em game on Friday nights, so I move a couple of hundred bucks from checking to savings on Friday afternoons. I move a similar amount each week and I do it from the same machine. The bank trusts me, and they trust my machine. Most importantly, they trust my behavior. This is adaptive authentication. There should be no reason for my bank to make this transaction difficult for me. Now let's say that I login from a Starbucks in Uzbekistan, and I transfer $2,500. What should my bank do now? Should they stop the transaction? Should they call my home number? (My former bank did exactly this once when I was taking money out of an ATM on a business trip, when I had provided my cell phone number as my primary contact. When I asked them why they called my home number rather than my cell, they told me that their “policy” is to call the home number. If I'm on the road, what exactly is the use of trying to reach me at home to verify my transaction?) But, back to Uzbekistan… Should my bank assume that I am happily at home in New Jersey, and someone is trying to hack into my account? Perhaps they think they are protecting me, but I wouldn’t be very happy if I happened to be traveling on business in Central Asia. What if my bank were to automatically analyze my behavior and calculate a risk score? Clearly, this scenario would be outside of my typical behavior, so my risk score would necessitate something more than a simple login and password. Perhaps, in this case, a one-time password to my cell phone would prove that this is not just some hacker half way around the world. But, what if you're not a bank? Do you need this level of security? If you want to be a business that is easy to deal with while also protecting your customers, then of course you do. You want your customers to trust you, but you also want them to enjoy doing business with you. Make it easy for them to do business with you, and they’ll come back, and perhaps even Tweet about it, or Like you, and then their friends will follow. How can Oracle help? Oracle has the technology and expertise to help you to grown your business with security. Oracle Adaptive Access Manager will help you to prevent fraud while making it easier for your customers to do business with you by providing the risk analysis I discussed above, step-up authentication, and much more. Oracle Mobile and Social Access Service will help you to secure mobile access to applications by expanding on your existing back-end identity management infrastructure, and allowing your customers to transact business with you using the social media accounts they already know. You also have device fingerprinting and metrics to help you to grow your business securely. Security is not just a cost anymore. It’s a way to set your business apart. With Oracle’s help, you can be the business that everyone’s tweeting about. Image courtesy of Flickr user shareski

    Read the article

  • SQL University: What and why of database testing

    - by Mladen Prajdic
    This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 2 – Tools of the trade With that out of the way let us sharpen our pencils and get going. Why test a database The sad state of the industry today is that there is very little emphasis on testing in general. Test driven development is still a small niche of the programming world while refactoring is even smaller. The cause of this is the inability of developers to convince themselves and their managers that writing tests is beneficial. At the moment they are mostly viewed as waste of time. This is because the average person (let’s not fool ourselves, we’re all average) is unable to think about lower future costs in relation to little more current work. It’s orders of magnitude easier to know about the current costs in relation to current amount of work. That’s why programmers convince themselves testing is a waste of time. However we have to ask ourselves what tests are really about? Maybe finding bugs? No, not really. If we introduce bugs, we’re likely to write test around those bugs too. But yes we can find some bugs with tests. The main point of tests is to have reproducible repeatability in our systems. By having a code base largely covered by tests we can know with better certainty what a small code change can break in other parts of the system. By having repeatability we can make code changes with confidence, since we know we’ll see what breaks in other tests. And here comes the inability to estimate future costs. By spending just a few more hours writing those tests we’d know instantly what broke where. Imagine we fix a reported bug. We check-in the code, deploy it and the users are happy. Until we get a call 2 weeks later about a certain monthly process has stopped working. What we don’t know is that this process was developed by a long gone coworker and for some reason it relied on that same bug we’ve happily fixed. There’s no way we could’ve known that. We say OK and go in and fix the monthly process. But what we have no clue about is that there’s this ETL job that relied on data from that monthly process. Now that we’ve fixed the process it’s giving unexpected (yet correct since we fixed it) data to the ETL job. So we have to fix that too. But there’s this part of the app we coded that relies on data from that exact ETL job. And just like that we enter the “Loop of maintenance horror”. With the loop eventually comes blame. Here’s a nice tip for all developers and DBAs out there: If you make a mistake man up and admit to it. All of the above is valid for any kind of software development. Keeping this in mind the database is nothing other than just a part of the application. But a big part! One reason why testing a database is even more important than testing an application is that one database is usually accessed from multiple applications and processes. This makes it the central and vital part of the enterprise software infrastructure. Knowing all this can we really afford not to have tests? What to test in a database Now that we’ve decided we’ll dive into this testing thing we have to ask ourselves what needs to be tested? The short answer is: everything. The long answer is: read on! There are 2 main ways of doing tests: Black box and White box testing. Black box testing means we have no idea how the system internals are built and we only have access to it’s inputs and outputs. With it we test that the internal changes to the system haven’t caused the input/output behavior of the system to change. The most important thing to test here are the edge conditions. It’s where most programs break. Having good edge condition tests we can be more confident that the systems changes won’t break. White box testing has the full knowledge of the system internals. With it we test the internal system changes, different states of the application, etc… White and Black box tests should be complementary to each other as they are very much interconnected. Testing database routines includes testing stored procedures, views, user defined functions and anything you use to access the data with. Database routines are your input/output interface to the database system. They count as black box testing. We test then for 2 things: Data and schema. When testing schema we only care about the columns and the data types they’re returning. After all the schema is the contract to the out side systems. If it changes we usually have to change the applications accessing it. One helpful T-SQL command when doing schema tests is SET FMTONLY ON. It tells the SQL Server to return only empty results sets. This speeds up tests because it doesn’t return any data to the client. After we’ve validated the schema we have to test the returned data. There no other way to do this but to have expected data known before the tests executes and comparing that data to the database routine output. Testing Authentication and Authorization helps us validate who has access to the SQL Server box (Authentication) and who has access to certain database objects (Authorization). For desktop applications and windows authentication this works well. But the biggest problem here are web apps. They usually connect to the database as a single user. Please ensure that that user is not SA or an account with admin privileges. That is just bad. Load testing ensures us that our database can handle peak loads. One often overlooked tool for load testing is Microsoft’s OSTRESS tool. It’s part of RML utilities (x86, x64) for SQL Server and can help determine if our database server can handle loads like 100 simultaneous users each doing 10 requests per second. SQL Profiler can also help us here by looking at why certain queries are slow and what to do to fix them.   One particular problem to think about is how to begin testing existing databases. First thing we have to do is to get to know those databases. We can’t test something when we don’t know how it works. To do this we have to talk to the users of the applications accessing the database, run SQL Profiler to see what queries are being run, use existing documentation to decipher all the object relationships, etc… The way to approach this is to choose one part of the database (say a logical grouping of tables that go together) and filter our traces accordingly. Once we’ve done that we move on to the next grouping and so on until we’ve covered the whole database. Then we move on to the next one. Database Testing is a topic that we can spent many hours discussing but let this be a nice intro to the world of database testing. See you in the next post.

    Read the article

  • More Great Improvements to the Windows Azure Management Portal

    - by ScottGu
    Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal.  These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately.  Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them.  You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it.  This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts.  You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it.  This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site.  After that, subsequent sites could only be created in that same region.  This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region.  This allows you to now deploy sites to North America, Europe and Asia simultaneously.  Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories).  Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role.  The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal.  This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab.  All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure.  Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server).  When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server.  You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code.  Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts.  To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners.  It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • SQL University: What and why of database refactoring

    - by Mladen Prajdic
    This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Tools of the trade This is a second part of the series and in it we’ll take a look at what database refactoring is and why do it. Why refactor a database To know why refactor we first have to know what refactoring actually is. Code refactoring is a process where we change module internals in a way that does not change that module’s input/output behavior. For successful refactoring there is one crucial thing we absolutely must have: Tests. Automated unit tests are the only guarantee we have that we haven’t broken the input/output behavior before refactoring. If you haven’t go back ad read my post on the matter. Then start writing them. Next thing you need is a code module. Those are views, UDFs and stored procedures. By having direct table access we can kiss fast and sweet refactoring good bye. One more point to have a database abstraction layer. And no, ORM’s don’t fall into that category. But also know that refactoring is NOT adding new functionality to your code. Many have fallen into this trap. Don’t be one of them and resist the lure of the dark side. And it’s a strong lure. We developers in general love to add new stuff to our code, but hate fixing our own mistakes or changing existing code for no apparent reason. To be a good refactorer one needs discipline and focus. Now we know that refactoring is all about changing inner workings of existing code. This can be due to performance optimizations, changing internal code workflows or some other reason. This is a typical black box scenario to the outside world. If we upgrade the car engine it still has to drive on the road (preferably faster) and not fly (no matter how cool that would be). Also be aware that white box tests will break when we refactor. What to refactor in a database Refactoring databases doesn’t happen that often but when it does it can include a lot of stuff. Let us look at a few common cases. Adding or removing database schema objects Adding, removing or changing table columns in any way, adding constraints, keys, etc… All of these can be counted as internal changes not visible to the data consumer. But each of these carries a potential input/output behavior change. Dropping a column can result in views not working anymore or stored procedure logic crashing. Adding a unique constraint shows duplicated data that shouldn’t exist. Foreign keys break a truncate table command executed from an application that runs once a month. All these scenarios are very real and can happen. With the proper database abstraction layer fully covered with black box tests we can make sure something like that does not happen (hopefully at all). Changing physical structures Physical structures include heaps, indexes and partitions. We can pretty much add or remove those without changing the data returned by the database. But the performance can be affected. So here we use our performance tests. We do have them, right? Just by adding a single index we can achieve orders of magnitude performance improvement. Won’t that make users happy? But what if that index causes our write operations to crawl to a stop. again we have to test this. There are a lot of things to think about and have tests for. Without tests we can’t do successful refactoring! Fixing bad code We all have some bad code in our systems. We usually refer to that code as code smell as they violate good coding practices. Examples of such code smells are SQL injection, use of SELECT *, scalar UDFs or cursors, etc… Each of those is huge code smell and can result in major code changes. Take SELECT * from example. If we remove a column from a table the client using that SELECT * statement won’t have a clue about that until it runs. Then it will gracefully crash and burn. Not to mention the widely unknown SELECT * view refresh problem that Tomas LaRock (@SQLRockstar on Twitter) and Colin Stasiuk (@BenchmarkIT on Twitter) talk about in detail. Go read about it, it’s informative. Refactoring this includes replacing the * with column names and most likely change to application using the database. Breaking apart huge stored procedures Have you ever seen seen a stored procedure that was 2000 lines long? I have. It’s not pretty. It hurts the eyes and sucks the will to live the next 10 minutes. They are a maintenance nightmare and turn into things no one dares to touch. I’m willing to bet that 100% of time they don’t have a single test on them. Large stored procedures (and functions) are a clear sign that they contain business logic. General opinion on good database coding practices says that business logic has no business in the database. That’s the applications part. Refactoring such behemoths requires writing lots of edge case tests for the stored procedure input/output behavior and then start to refactor it. First we split the logic inside into smaller parts like new stored procedures and UDFs. Those then get called from the master stored procedure. Once we’ve successfully modularized the database code it’s best to transfer that logic into the applications consuming it. This only leaves the stored procedure with common data manipulation logic. Of course this isn’t always possible so having a plethora of performance and behavior unit tests is absolutely necessary to confirm we’ve actually improved the codebase in some way.   Refactoring is not a popular chore amongst developers or managers. The former don’t like fixing old code, the latter can’t see the financial benefit. Remember how we talked about being lousy at estimating future costs in the previous post? But there comes a time when it must be done. Hopefully I’ve given you some ideas how to get started. In the last post of the series we’ll take a look at the tools to use and an example of testing and refactoring.

    Read the article

  • Rapid Evolution of Society & Technology

    - by Michael Snow
    We caught up with Brian Solis on the phone the other day and Christie Flanagan had a chance to chat with him and learn a bit more about him and some of the concepts he'll be addressing in our Social Business Thought Leaders Webcast on Thursday 12/13/12. «--- Interview with Brian Solis  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast- mso-fareast-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Be sure and register for this week's webcast ---» ------------------- Guest post by Brian Solis. Reposted (Borrowed) from his posting of May 24, 2012 Dear [insert business name], what’s your promise? - Brian Solis You say you want to get closer to customers, but your actions are different than your words. You say you want to “surprise and delight” customers, but your product development teams are too busy building against a roadmap without consideration of the 5th P of marketing…people. Your employees are your number one asset, however the infrastructure of the organization has turned once optimistic and ambitious intrapreneurs into complacent cogs or worse, your greatest detractors. You question the adoption of disruptive technology by your internal champions yet you’ve not tried to find the value for yourself. You’re a change agent and you truly wish to bring about change, but you’ve not invested time or resources to answer “why” in your endeavors to become a connected or social business. If we are to truly change, we must find purpose. We must uncover the essence of our business and the value it delivers to traditional and connected consumers. We must rethink the spirit of today’s embrace and clearly articulate how transformation is going to improve customer and employee experiences and relationships now and over time. Without doing so, any attempts at evolution will be thwarted by reality. In an era of Digital Darwinism, no business is too big to fail or too small to succeed. These are undisciplined times which require alternative approaches to recognize and pursue new opportunities. But everything begins with acknowledging the 360 view of the world that you see today is actually a filtered view of managed and efficient convenience. Today, many organizations that were once inspired by innovation and engagement have fallen into a process of marketing, operationalizing, managing, and optimizing. That might have worked for the better part of the last century, but for the next 10 years and beyond, new vision, leadership and supporting business models will be written to move businesses from rigid frameworks to adaptive and agile entities. I believe that today’s executives will undergo a great test; a test of character, vision, intention, and universal leadership. It starts with a simple, but essential question…what is your promise? Notice, I didn’t ask about your brand promise. Nor did I ask for you to cite your mission and vision statements. This is much more than value propositions or manufactured marketing language designed to hook audiences and stakeholders. I asked for your promise to me as your consumer, stakeholder, and partner. This isn’t about B2B or B2C, but instead, people to people, person to person. It is this promise that will breathe new life into an organization that on the outside, could be misdiagnosed as catatonic by those who are disrupting your markets. A promise, for example, is meant to inspire. It creates alignment. It serves as the foundation for your vision, mission, and all business strategies and it must come from the top to mean anything. For without it, we cannot genuinely voice what it is we stand for or stand behind. Think for a moment about the definition of community. It’s easy to confuse a workplace or a market where everyone simply shares common characteristics. However, a community in this day and age is much more than belonging to something, it’s about doing something together that makes belonging matter The next few years will force a divide where companies are separated by intention as measured by actions and words. But, becoming a social business is not enough. Becoming more authentic and transparent doesn’t serve as a mantra for a renaissance. A promise is the ink that inscribes the spirit of the relationship between you and me. A promise serves as the words that influence change from within and change beyond the halls of our business. It is the foundation for a renewed embrace, one that must then find its way to every aspect of the organization. It’s the difference between a social business and an adaptive business. While an adaptive business can also be social, it is the culture of the organization that strives to not just use technology to extend current philosophies or processes into new domains, but instead give rise to a new culture where striving for relevance is among its goals. The tools and networks simply become enablers of a greater mission You are reading this because you believe in something more than what you’re doing today. While you fight for change within your organization, remember to aim for a higher purpose. Organizations that strive for innovation, imagination, and relevance will outperform those that do not. Part of your job is to lead a missionary push that unites the groundswell with a top down cascade. Change will only happen because you and other internal champions see what others can’t and will do what other won’t. It takes resolve. It takes the ability to translate new opportunities into business value. And, it takes courage. “This is a very noisy world, so we have to be very clear what we want them to know about us”-Steve Jobs ----------------------------------------------------------------- So -- where do you begin to evaluate the kind of experience you are delivering for your customers, partners, and employees?  Take a look at this White Paper: Creating a Successful and Meaningful Customer Experience on the Web and then have a cup of coffee while you listen to the sage advice of Guy Kawasaki in a short video below.   An interview with Guy Kawasaki on Maximizing Social Media Channels 

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Creating a Training Lab on Windows Azure

    - by Michael Stephenson
    Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/06/17/153149.aspxThis week we are preparing for a training course that Alan Smith will be running for the support teams at one of my customers around Windows Azure. In order to facilitate the training lab we have a few prerequisites we need to handle. One of the biggest ones is that although the support team all have MSDN accounts the local desktops they work on are not ideal for running most of the labs as we want to give them some additional developer background training around Azure. Some recent Azure announcements really help us in this area: MSDN software can now be used on Azure VM You don't pay for Azure VM's when they are no longer used  Since the support team only have limited experience of Windows Azure and the organisation also have an Enterprise Agreement we decided it would be best value for money to spin up a training lab in a subscription on the EA and then we can turn the machines off when we are done. At the same time we would be able to spin them back up when the users need to do some additional lab work once the training course is completed. In order to achieve this I wanted to create a powershell script which would setup my training lab. The aim was to create 18 VM's which would be based on a prebuilt template with Visual Studio and the Azure development tools. The script I used is described below The Start & Variables The below text will setup the powershell environment and some variables which I will use elsewhere in the script. It will also import the Azure Powershell cmdlets. You can see below that I will need to download my publisher settings file and know some details from my Azure account. At this point I will assume you have a basic understanding of Azure & Powershell so already know how to do this. Set-ExecutionPolicy Unrestrictedcls $startTime = get-dateImport-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\Azure.psd1"# Azure Publisher Settings $azurePublisherSettings = '<Your settings file>.publishsettings'  # Subscription Details $subscriptionName = "<Your subscription name>" $defaultStorageAccount = "<Your default storage account>"  # Affinity Group Details $affinityGroup = '<Your affinity group>' $dataCenter = 'West Europe' # From Get-AzureLocation  # VM Details $baseVMName = 'TRN' $adminUserName = '<Your admin username>' $password = '<Your admin password>' $size = 'Medium' $vmTemplate = '<The name of your VM template image>' $rdpFilePath = '<File path to save RDP files to>' $machineSettingsPath = '<File path to save machine info to>'    Functions In the next section of the script I have some functions which are used to perform certain actions. The first is called CreateVM. This will do the following actions: If the VM already exists it will be deleted Create the cloud service Create the VM from the template I have created Add an endpoint so we can RDP to them all over the same port Download the RDP file so there is a short cut the trainees can easily access the machine via Write settings for the machine to a log file  function CreateVM($machineNo) { # Specify a name for the new VM $machineName = "$baseVMName-$machineNo" Write-Host "Creating VM: $machineName"       # Get the Azure VM Image      $myImage = Get-AzureVMImage $vmTemplate   #If the VM already exists delete and re-create it $existingVm = Get-AzureVM -Name $machineName -ServiceName $serviceName if($existingVm -ne $null) { Write-Host "VM already exists so deleting it" Remove-AzureVM -Name $machineName -ServiceName $serviceName }   "Creating Service" $serviceName = "bupa-azure-train-$machineName" Remove-AzureService -Force -ServiceName $serviceName New-AzureService -Location $dataCenter -ServiceName $serviceName   Write-Host "Creating VM: $machineName" New-AzureQuickVM -Windows -name $machineName -ServiceName $serviceName -ImageName $myImage.ImageName -InstanceSize $size -AdminUsername $adminUserName -Password $password  Write-Host "Updating the RDP endpoint for $machineName" Get-AzureVM -name $machineName -ServiceName $serviceName ` | Add-AzureEndpoint -Name RDP -Protocol TCP -LocalPort 3389 -PublicPort 550 ` | Update-AzureVM    Write-Host "Get the RDP File for machine $machineName" $machineRDPFilePath = "$rdpFilePath\$machineName.rdp" Get-AzureRemoteDesktopFile -name $machineName -ServiceName $serviceName -LocalPath "$machineRDPFilePath"   WriteMachineSettings "$machineName" "$serviceName" }    The delete machine settings function is used to delete the log file before we start re-running the process.  function DeleteMachineSettings() { Write-Host "Deleting the machine settings output file" [System.IO.File]::Delete("$machineSettingsPath"); }    The write machine settings function will get the VM and then record its details to the log file. The importance of the log file is that I can easily provide the information for all of the VM's to our infrastructure team to be able to configure access to all of the VM's    function WriteMachineSettings([string]$vmName, [string]$vmServiceName) { Write-Host "Writing to the machine settings output file"   $vm = Get-AzureVM -name $vmName -ServiceName $vmServiceName $vmEndpoint = Get-AzureEndpoint -VM $vm -Name RDP   $sb = new-object System.Text.StringBuilder $sb.Append("Service Name: "); $sb.Append($vm.ServiceName); $sb.Append(", "); $sb.Append("VM: "); $sb.Append($vm.Name); $sb.Append(", "); $sb.Append("RDP Public Port: "); $sb.Append($vmEndpoint.Port); $sb.Append(", "); $sb.Append("Public DNS: "); $sb.Append($vmEndpoint.Vip); $sb.AppendLine(""); [System.IO.File]::AppendAllText($machineSettingsPath, $sb.ToString());  } # end functions    Rest of Script In the rest of the script it is really just the bit that orchestrates the actions we want to happen. It will load the publisher settings, select the Azure subscription and then loop around the CreateVM function and create 16 VM's  Import-AzurePublishSettingsFile $azurePublisherSettings Set-AzureSubscription -SubscriptionName $subscriptionName -CurrentStorageAccount $defaultStorageAccount Select-AzureSubscription -SubscriptionName $subscriptionName  DeleteMachineSettings    "Starting creating Bupa International Azure Training Lab" $numberOfVMs = 16  for ($index=1; $index -le $numberOfVMs; $index++) { $vmNo = "$index" CreateVM($vmNo); }    "Finished creating Bupa International Azure Training Lab" # Give it a Minute Start-Sleep -s 60  $endTime = get-date "Script run time " + ($endTime - $startTime)    Conclusion As you can see there is nothing too fancy about this script but in our case of creating a small isolated training lab which is not connected to our corporate network then we can easily use this to provision the lab. Im sure if this is of use to anyone you can easily modify it to do other things with the lab environment too. A couple of points to note are that there are some soft limits in Azure about the number of cores and services your subscription can use. You may need to contact the Azure support team to be able to increase this limit. In terms of the real business value of this approach, it was not possible to use the existing desktops to do the training on, and getting some internal virtual machines would have been relatively expensive and time consuming for our ops team to do. With the Azure option we are able to spin these machines up for a temporary period during the training course and then throw them away when we are done. We expect the costing of this test lab to be very small, especially considering we have EA pricing. As a ball park I think my 18 lab VM training environment will cost in the region of $80 per day on our EA. This is a fraction of the cost of the creation of a single VM on premise.

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • SQL Sentry First Impressions

    - by AjarnMark
    After struggling to defend my SQL Servers from a political attack recently, I realized that I needed better tools to back me up, and SQL Sentry is the leading candidate. A couple of weeks ago, seemingly from out of nowhere, complaints from the business users started coming in that one of the core internal applications was running dramatically slower than normal, and fingers were being pointed at the SQL Server.  Unfortunately, we don’t have a production DBA whose entire job is to monitor and maintain our SQL Servers.  The responsibility falls to me to do the best I can, investing only a small portion of my time, because there are so many other responsibilities to take care of, and our industry is still deep in recession.  I inherited these SQL Servers and have made significant improvements in process and procedure, but I had not yet made the time to take real baseline measurements or keep a really close eye on the performance.  Like many DBAs, I wrote several of my own tools and used the “built-in tools” like Profiler, PerfMon, and sp_who2 (did I mention most of our instances are SQL Server 2000?).  These have all served me well for in-the-moment troubleshooting and maintenance, but they really fell down on the job when I was called upon to “prove” that SQL Server performance was acceptable and more importantly had not degraded recently (i.e. historical comparisons).  I really didn’t have anything from a historical comparison perspective, but I was able to show that current performance was acceptable, and deflect attention back onto other components (which in fact turned out to be the real culprit). That experience dramatically illustrated the need for better monitoring tools.  Coincidentally, I had been talking recently to my boss about the mini nightmare of monitoring several critical and interdependent overnight jobs that operate on separate instances of SQL Server.  Among other tools, I had been using Idera’s SQL Job Manager which is a free tool and did a nice job of showing me job schedules and histories in a nice calendar view.  This worked fairly well, and for the money (did I mention it was free?) it couldn’t be beat.  But it is based on the stored job history in MSDB, and there were other performance problems that we ran into when we started changing the settings for how much job history to retain, in order to be able to look back a month or more in the calendar view.  Another coincidence (if you believe in such things) was that when we had some of those performance challenges, I posted a couple of questions to the #sqlhelp hashtag on Twitter and Greg Gonzalez (@SQLSensei) suggested I check out SQL Sentry’s Event Manager.  At the time, I just thought he worked there, but later found out that he founded the company.  When I took a quick look at the features & benefits, the one that really jumped out at me is Chaining and Queueing which sounded like it would really help with our “interdependent jobs on different servers” issue. I know that is a lot of background story and coincidences, but hopefully you have stuck with me so far, and now we have arrived at the point where last week I downloaded and installed the 30-day trial of the SQL Sentry Power Suite, which is Event Manager plus Performance Advisor.  And I must say that I really like what I see so far.  Here are a few highlights: Great Support.  I had two issues getting the trial setup and monitoring a handful of our servers.  One of which was entirely my fault (missed a security setting in SQL 2008) and the other was mostly my fault (late change to some config settings that were apparently cached and did not get refreshed properly).  In both cases, the support staff at SQL Sentry were very responsive and rather quickly figured out what the cause and fix was for each of them.  This left me with a great impression of the company.  Kudos to them! Chaining and Queueing.  While I have not yet activated this feature, I am very excited about the possibilities.  We have jobs on three different instances of SQL Server that have to be run in a certain order, and each has to finish before the next can successfully begin, and I believe this feature will ensure just that.  It has been a real pain in the backside when one of those jobs runs just a little too long and does not finish before the job on another instance starts, thus triggering a chain reaction of either outright job failures, or worse, successful completion of completely invalid processing. Calendar View.  I really, really like the Event Manager calendar view where I can see all jobs and events across all instances and identify potential resource contention as well as windows of opportunity for maintenance activity.  Very well done, and based on Event Manager’s own database of accumulated historical information rather than querying the source instances every time. Performance Advisor Dashboard History View.  This view let’s me quickly select a date and time range and it displays graphs of key SQL Server and Windows metrics.  This is exactly the thing I needed to answer the “has performance changed recently” question at the beginning of this post. Reporting Services Subscription Jobs with Report Name.  This was a big and VERY pleasant surprise.  If you have ever looked at the list of SQL Server jobs that SQL Server Reporting Services creates when you make a Subscription, you will notice that they all have some sort of GUID as the name of the job.  This is really ugly, and really annoying because when you are just looking at the SQL Agent and Job Activity Monitor, if you see that Job X failed, you really do not have any indication in the name or the properties of the Job itself, as to what Report that was for.  But with SQL Sentry Event Manager you do.  The Jobs list in the Navigator pane in SQL Sentry, amazingly, displays the name of the Report that the Subscription Job is for.  And when you open it to see more details, it shows you the full Reporting Services path to that Report, so you can immediately track it down in the Report Manager in case you want to identify/notify the owner or edit the Subscription information.  I did not expect this at all, but I sure do like it.  HOORAY! That is just my first impressions from using the tools for a few days.  And I haven’t even gotten into how it showed me where I was completely mistaken about one aspect of my SQL Server disk configurations.  I’ll share that lesson in another blog entry.  But I have to say it again, the combination of Event Manager and Performance Advisor working together have really made me a fan.

    Read the article

  • 10 tape technology features that make you go hmm.

    - by Karoly Vegh
    A week ago an Oracle/StorageTek Tape Specialist, Christian Vanden Balck, visited Vienna, and agreed to visit customers to do techtalks and update them about the technology boom going around tape. I had the privilege to attend some of his sessions and noted the information and features that took the customers by surprise and made them think. Allow me to share the top 10: I. StorageTek as a brand: StorageTek is one of he strongest names in the Tape field. The brand itself was valued so much by customers that even after Sun Microsystems acquiring StorageTek and the Oracle acquiring Sun the brand lives on with all the Oracle tapelibraries are officially branded StorageTek.See http://www.oracle.com/us/products/servers-storage/storage/tape-storage/overview/index.html II. Disk information density limitations: Disk technology struggles with information density. You haven't seen the disk sizes exploding lately, have you? That's partly because there are physical limits on a disk platter. The size is given, the number of platters is limited, they just can't grow, and are running out of physical area to write to. Now, in a T10000C tape cartridge we have over 1000m long tape. There you go, you have got your physical space and don't need to stuff all that data crammed together. You can write in a reliable pattern, and have space to grow too. III. Oracle has a market share of 62% worldwide in recording head manufacturing. That's right. If you are running LTO drives, with a good chance you rely on StorageTek production. That's two out of three LTO recording heads produced worldwide.  IV. You can store 1 Exabyte data in a single tape library. Yes, an Exabyte. That is 1000 Petabytes. Or, a million Terabytes. A thousand million GigaBytes. You can store that in a stacked StorageTek SL8500 tapelibrary. In one SL8500 you can put 10.000 T10000C cartridges, that store 10TB data (compressed). You can stack 10 of these SL8500s together. Boom. 1000.000 TB.(n.b.: stacking means interconnecting the libraries. Yes, cartridges are moved between the stacked libraries automatically.)  V. EMC: 'Tape doesn't suck after all. We moved on.': Do you remember the infamous 'Tape sucks, move on' Datadomain slogan? Of course they had to put it that way, having only had disk products. But here's a fun fact: on the EMCWorld 2012 there was a major presence of a Tape-tech company - EMC, in a sudden burst of sanity is embracing tape again. VI. The miraculous T10000C: Oracle StorageTek has developed an enterprise-grade tapedrive and cartridge, the T10000C. With awesome numbers: The Cartridge: Native 5TB capacity, 10TB with compression Over a kilometer long tape within the cartridge. And it's locked when unmounted, no rattling of your data.  Replaced the metalparticles datalayer with BaFe (bariumferrite) - metalparticles lose around 7% of magnetism within 30 days. BaFe does not. Yes we employ solid-state physicists doing R&D on demagnetisation in our labs. Can be partitioned, storage tiering within the cartridge!  The Drive: 2GB Cache Encryption implemented in HW - no performance hit 252 MB/s native sustained data rate, beats disk technology by far. Not to mention peak throughput.  Leading the tape while never touching the data side of it, protecting your data physically too Data integritiy checking (CRC recalculation) on tape within the drive without having to read it back to the server reordering data from tape-order, delivering it back in application-order  writing 32 tracks at once, reading them back for CRC check at once VII. You only use 20% of your data on a regular basis. The rest 80% is just lying around for years. On continuously spinning disks. Doubly consuming energy (power+cooling), blocking diskstorage capacity. There is a solution called SAM (Storage Archive Manager) that provides you a filesystem unifying disk and tape, moving data on-demand and for clients transparently between the different storage tiers. You can share these filesystems with NFS or CIFS for clients, and enjoy the low TCO of tape. Tapes don't spin. They sit quietly in their slots, storing 10TB data, using no energy, producing no heat, automounted when a client accesses their data.See: http://www.oracle.com/us/products/servers-storage/storage/storage-software/storage-archive-manager/overview/index.html VIII. HW supported for three decades: Did you know that the original PowderHorn library was released in '87 and has been only discontinued in 2010? That is over two decades of supported operation. Tape libraries are - just like the data carrying on tapecartridges - built for longevity. Oh, and the T10000C cartridge has 30-year archival life for long-term retention.  IX. Tape is easy to manage: Have you heard of Tape Storage Analytics? It is a central graphical tool to summarize, monitor, analyze dataflow, health and performance of drives and libraries, see: http://www.oracle.com/us/products/servers-storage/storage/tape-storage/tape-analytics/overview/index.html X. The next generation: The T10000B drives were able to reuse the T10000A cartridges and write on them even more data. On the same cartridges. We call this investment protection, and this is very important for Oracle for the future too. We usually support two generations of cartridges together. The current drive is a T10000C. (...I know I promised to enlist 10, but I got still two more I really want to mention. Allow me to work around the problem: ) X++. The TallBots, the robots moving around the cartridges in the StorageTek library from tapeslots to the drives are cableless. Cables, belts, chains running to moving parts in a library cause maintenance downtimes. So StorageTek eliminated them. The TallBots get power, commands, even firmwareupgrades through the rails they are running on. Also, the TallBots don't just hook'n'pull the tapes out of their slots, they actually grip'n'lift them out. No friction, no scratches, no zillion little plastic particles floating around in the library, in the drives, on your data. (X++)++: Tape beats SSDs and Disks. In terms of throughput (252 MB/s), in terms of TCO: disks cause around 290x more power and cooling, in terms of capacity: 10TB on a single media and soon more.  So... do you need to store large amounts of data? Are you legally bound to archive it for dozens of years? Would you benefit from automatic storage tiering? Have you got large mediachunks to be streamed at times? Have you got power and cooling issues in the growing datacenters? Do you find EMC's 180° turn of tape attitude interesting, but appreciate it at the same time? With all that, you aren't alone. The most data on this planet is stored on tape. Tape is coming. Big time.

    Read the article

  • Refactoring Part 1 : Intuitive Investments

    - by Wes McClure
    Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

    Read the article

  • How do I restrict concurrent statistics gathering to a small set of tables from a single schema?

    - by Maria Colgan
    I got an interesting question from one of my colleagues in the performance team last week about how to restrict a concurrent statistics gather to a small subset of tables from one schema, rather than the entire schema. I thought I would share the solution we came up with because it was rather elegant, and took advantage of concurrent statistics gathering, incremental statistics, and the not so well known “obj_filter_list” parameter in DBMS_STATS.GATHER_SCHEMA_STATS procedure. You should note that the solution outline below with “obj_filter_list” still applies, even when concurrent statistics gathering and/or incremental statistics gathering is disabled. The reason my colleague had asked the question in the first place was because he wanted to enable incremental statistics for 5 large partitioned tables in one schema. The first time you gather statistics after you enable incremental statistics on a table, you have to gather statistics for all of the existing partitions so that a synopsis may be created for them. If the partitioned table in question is large and contains a lot of partition, this could take a considerable amount of time. Since my colleague only had the Exadata environment at his disposal overnight, he wanted to re-gather statistics on 5 partition tables as quickly as possible to ensure that it all finished before morning. Prior to Oracle Database 11g Release 2, the only way to do this would have been to write a script with an individual DBMS_STATS.GATHER_TABLE_STATS command for each partition, in each of the 5 tables, as well as another one to gather global statistics on the table. Then, run each script in a separate session and manually manage how many of this session could run concurrently. Since each table has over one thousand partitions that would definitely be a daunting task and would most likely keep my colleague up all night! In Oracle Database 11g Release 2 we can take advantage of concurrent statistics gathering, which enables us to gather statistics on multiple tables in a schema (or database), and multiple (sub)partitions within a table concurrently. By using concurrent statistics gathering we no longer have to run individual statistics gathering commands for each partition. Oracle will automatically create a statistics gathering job for each partition, and one for the global statistics on each partitioned table. With the use of concurrent statistics, our script can now be simplified to just five DBMS_STATS.GATHER_TABLE_STATS commands, one for each table. This approach would work just fine but we really wanted to get this down to just one command. So how can we do that? You may be wondering why we didn’t just use the DBMS_STATS.GATHER_SCHEMA_STATS procedure with the OPTION parameter set to ‘GATHER STALE’. Unfortunately the statistics on the 5 partitioned tables were not stale and enabling incremental statistics does not mark the existing statistics stale. Plus how would we limit the schema statistics gather to just the 5 partitioned tables? So we went to ask one of the statistics developers if there was an alternative way. The developer told us the advantage of the “obj_filter_list” parameter in DBMS_STATS.GATHER_SCHEMA_STATS procedure. The “obj_filter_list” parameter allows you to specify a list of objects that you want to gather statistics on within a schema or database. The parameter takes a collection of type DBMS_STATS.OBJECTTAB. Each entry in the collection has 5 feilds; the schema name or the object owner, the object type (i.e., ‘TABLE’ or ‘INDEX’), object name, partition name, and subpartition name. You don't have to specify all five fields for each entry. Empty fields in an entry are treated as if it is a wildcard field (similar to ‘*’ character in LIKE predicates). Each entry corresponds to one set of filter conditions on the objects. If you have more than one entry, an object is qualified for statistics gathering as long as it satisfies the filter conditions in one entry. You first must create the collection of objects, and then gather statistics for the specified collection. It’s probably easier to explain this with an example. I’m using the SH sample schema but needed a couple of additional partitioned table tables to get recreate my colleagues scenario of 5 partitioned tables. So I created SALES2, SALES3, and COSTS2 as copies of the SALES and COSTS table respectively (setup.sql). I also deleted statistics on all of the tables in the SH schema beforehand to more easily demonstrate our approach. Step 0. Delete the statistics on the tables in the SH schema. Step 1. Enable concurrent statistics gathering. Remember, this has to be done at the global level. Step 2. Enable incremental statistics for the 5 partitioned tables. Step 3. Create the DBMS_STATS.OBJECTTAB and pass it to the DBMS_STATS.GATHER_SCHEMA_STATS command. Here, you will notice that we defined two variables of DBMS_STATS.OBJECTTAB type. The first, filter_lst, will be used to pass the list of tables we want to gather statistics on, and will be the value passed to the obj_filter_list parameter. The second, obj_lst, will be used to capture the list of tables that have had statistics gathered on them by this command, and will be the value passed to the objlist parameter. In Oracle Database 11g Release 2, you need to specify the objlist parameter in order to get the obj_filter_list parameter to work correctly due to bug 14539274. Will also needed to define the number of objects we would supply in the obj_filter_list. In our case we ere specifying 5 tables (filter_lst.extend(5)). Finally, we need to specify the owner name and object name for each of the objects in the list. Once the list definition is complete we can issue the DBMS_STATS.GATHER_SCHEMA_STATS command. Step 4. Confirm statistics were gathered on the 5 partitioned tables. Here are a couple of other things to keep in mind when specifying the entries for the  obj_filter_list parameter. If a field in the entry is empty, i.e., null, it means there is no condition on this field. In the above example , suppose you remove the statement Obj_filter_lst(1).ownname := ‘SH’; You will get the same result since when you have specified gather_schema_stats so there is no need to further specify ownname in the obj_filter_lst. All of the names in the entry are normalized, i.e., uppercased if they are not double quoted. So in the above example, it is OK to use Obj_filter_lst(1).objname := ‘sales’;. However if you have a table called ‘MyTab’ instead of ‘MYTAB’, then you need to specify Obj_filter_lst(1).objname := ‘”MyTab”’; As I said before, although we have illustrated the usage of the obj_filter_list parameter for partitioned tables, with concurrent and incremental statistics gathering turned on, the obj_filter_list parameter is generally applicable to any gather_database_stats, gather_dictionary_stats and gather_schema_stats command. You can get a copy of the script I used to generate this post here. +Maria Colgan

    Read the article

  • Experiences with learning Chinese

    - by Greg Low
    I've had a few friends asking me about learning Chinese and what I've found works and doesn't work. I was answering a question on a mailing list today and I thought I should post this info where it might be useful to many. The question that was initially asked was whether Rosetta Stone was useful but I've provided much more info on learning the language here. I’ve used Rosetta Stone with Chinese but it’s really hard to know whether to recommend it or not. Rosetta Stone works the same way in all languages. They show you photos and then let you both see and hear the target language and get you to work out what they’re talking about. The thinking is that that’s how children learn. However, at first, I found it very frustrating. I’d be staring at photos trying to work out what they were really trying to get at. Sometimes it’s far from obvious. I could not have survived without Google Translate open at the same time. The other weird thing is that the photos are from a mixture of countries. While that’s good in a way, it also means that they are endlessly showing pictures of something that would never happen in the target language and culture. For any language, constant interaction with a speaker of the target language is needed. Rosetta Stone has a “Studio” option. That’s the best part of the program. In my case, it lets me connect around twice a week to a live online class from Beijing. Classes usually have the teacher plus two to four students. You get some Studio access with the initial packages but need to purchase it for ongoing use. I find it very inexpensive. It seems to work out to about $70 (AUD/USD) for six months. That’s a real bargain. The other downside to Rosetta Stone is that they tend to teach very formal language, but as with other languages, that’s not how the locals speak. It might have been correct at one point but no-one actually says that. As an example, Rosetta Stone teach Gonggòng qìche (pronounced roughly like “gong gong chee chure” for bus. Most of my friends from areas like Taiwan would just say Gongche. Google Translate says Zongxiàn (pronounced somewhat like “dzong sheean”) instead. Mind you, the Rosetta Stone option isn't really as bad as "omnibus"; it's more like saying "public bus". If you say the option they provide, people would understand you. I also listen to ChinesePod in the car. They also have SpanishPod. Each podcast is about five minutes of spoken conversation. It is very good for providing current language. Another resource I use is local Meetup groups. Most cities have these and for a variety of languages. It’s way less structured (just standard conversation) but good for getting interaction. The obvious challenge for Asian languages is reading/writing. The input editors for Chinese that are part of Windows are excellent. Many of my Chinese friends speak fluently but cannot read or write. I was determined to learn to do both. For writing, I’m talking about on a computer, not with a pen. (Mind you, I can barely write English with a pen nowadays). When using Rosetta Stone, you can choose to have the Chinese words displayed in pinyin (Wo xihuan xuéxí zhongguó) or in Chinese characters (???????) or both. This year, I’ve been forcing myself to just use the Chinese characters. I use a pinyin input editor in Windows though, as it’s very fast.  (The character recognition input in the iPad is also amazing). Notice from the example that I provided above that the pronunciation of the pinyin isn’t that obvious to us at first either.  Since changing to only using characters, I find I can now read many more Chinese characters fluently. It’s a major challenge though. I can read about 300 now and yet you need around 2,500 to be able to read a newspaper fairly well. Tones are a major issue for some Asian languages. Mandarin has four tones (plus a neutral tone) and there is a major difference in meaning between two words that are spelled the same in pinyin but with different tones. For example, Ma (3rd tone?) is a horse, Ma (1st tone?) is like “mom”, and ma (neutral tone?) is a question mark and so on. Clearly you don’t want to mix these up. As in English, they also have words that do sound the same but mean different things in different contexts. What’s interesting is that even though we see two words that differ only by tone as very similar, to a native speaker, if you say the right words with the wrong tone, you might as well have said a completely different word. My wife’s dialect of Chinese has eight tones. It’s much worse. The reason I’m so keen to learn to read/write Chinese is that even though the different dialects are pronounced so differently that speakers of one dialect often cannot understand another dialect, the writing is generally the same. The only difference is that many years ago, the Chinese government created a simplified set of characters for some of the most commonly used ones. Older Chinese and most Cantonese speakers often struggle with the simplified characters. This is the simplified form of “three apples”: ????   This is the traditional form of the same words: ????  Note that two of the characters are the same but the middle two are quite different. For most languages, the best thing is to watch current movies in the target language but to watch them with the target language as subtitles, not your native language. You want to know what they actually said, not what it roughly means (which is what the English subtitle would give you). The difficulty with Asian languages like Chinese is that you have the added challenge of understanding the subtitles when they are written in the target language. I wish there were Mandarin Chinese movies with pinyin subtitles. For learning to read characters, I also recommend HanCard on the iPad. It is targeted at the HSK language proficiency levels. (I’m intending to take the first HSK exam as soon as I’m ready). Hope that info helps someone get started.  

    Read the article

  • 5 Ways Android Still Disappoints (Me)

    - by TStewartDev
    Let me make this clear: I'm annoyed with Apple. I don't like their current policies and I don't like where Steve Jobs is taking the company. In general, I don't like it when any one company gets too much control in a market. When that happens, the leading company dictates the game and as consumers, our options all but disappear. That said, I'm still going to buy a new iPhone next week. My Apple-hating friends seem to desperately want me to go Android instead, but frankly, it's not good enough for me, and here are the reasons why. The Modern WinMo One of the reasons that Microsoft has identified for Windows Mobile's rapid decline is the breadth of hardware. They exercised little control over manufacturer's implementations. In theory, that sounds great. We as consumers have lots of choice. In practice, though, it meant among other things that updates to the devices were left up to the manufacturers. As a result, that rarely happened. (I'm still bitter at Toshiba for leaving me hanging back in 2002.) And now, Google is doing the same thing with Android. Case in point: my wife has a Motorola Backflip that we bought in April. It was released in March. Motorola says it will get Android 2.1 "sometime in Q3". Great. Meanwhile, I pull down the latest version of iPhone OS (now iOS) and install it the same day it's released. You may say that I can't judge Android by one lazy manufacturer. Yup, I sure can. With Apple, my original iPhone has been supported perfectly for 3 years. With Android, I will have to wait for upgrades after Google releases them, possibly indefinitely. Not cool. AT&T We signed a new contract with AT&T in April to get my wife's phone. I've had a reasonable experience with them. I don't imagine my experience with Verizon would be any better, and I'm relatively confident that Sprint doesn't have the coverage it takes to work well for us. The fact is, AT&T, for whatever reason, doesn't have jack for Android phones. May not be Android's fault, but it's still a shortcoming that prevents me from having it just like the iPhone's exclusivity keeps some folks on other networks from having it. Innovation? What Innovation? Android has a nice dashboard and a great notification system and… nothing else original. I keep reading about how disappointing the iPhone is nowadays. "It has no innovation," people say. Who does? Android has modeled its behavior after the iPhone. That's fine, but if all you've got is a similar product and I'm invested both skill-wise and app-wise in my current platform, why should I change? Microsoft's new Windows Phone 7 looks somewhat innovative, and I'm pretty excited to see what they'll bring to the table, but that's another six months away, at least. I've got a 3 year old phone that has some annoying issues now (thanks to recent encounters with water). I need a new phone now. Is This Going to Work? There's no shortage of criticism of Apple over its App Store policies, and I've vented my own anger about it. However, I will give them credit: their screening of apps has done a great job of weeding out the crap and gives an excellent indication that the app will work on my device. How about Android? Nope. It might work on your phone. Maybe. You'll have to try it to see. Get burned by it? Well, write a nasty review to try to keep others from making the mistake you did. If you don't mind doing that stuff, then Android is the platform for you. Personally, I'd rather have a receptionist screening out the telemarketing and survey calls than hang up on them myself, but that's your call. Slow, Slowing, Slower All this yapping about multitasking. This is an area I've been on Apple's side from the beginning. Sorry folks, but this is the number one reason I hated Windows Mobile: the longer you use it, the slower it gets because it doesn't kill apps. I'm with Steve Jobs on this one: if you see a task manager, we're doing it wrong. I don't want to have to manually kill apps. I hate doing that on Windows let alone on a mobile device. To me, priority one should be keeping the device speedy. Waiting for your device to respond is unacceptable. Bonus! Taken from iPhone Letdown? 8 Things Apple Didn't Announce, here are my responses: 4G Yeah, let me know if your area actually has it. I live in Lincoln, Nebraska. No carrier is going to have 4G here for at least 3 years. Meanwhile, you still get to pay for it. Yay! Cloud iTunes/OTA Sync You got me here. Of course, whether or not your Android device will be able to do it is always a good question. 3G Video Chat You got me here, too. I'm sure you spent countless hours in front of your phone with video chat. Also, I can't wait for the "No Video Chat While Driving" laws. Mobile Hotspot This is a neat feature, but as the author points out, it's left up to the carrier whether to implement it or not. Pretty sure any Android phones that come to AT&T won't have this enabled in the foreseeable future. Is Verizon even allowing this? I just figured Sprint was because they're failing so hard at keeping customers. Free MobileMe I use Google's services with my iPhone. The only people I know who use MobileMe are Apple fanboys and fangirls. If you choose to pay for a service that you can get for free, that's your decision, not Apple's. Voice Input Voice input has been available on phones (even "dumb" phones) for years now. iPhone does have the ability, though limited. Why don't I hear people telling their phones what to do? Maybe because it's still easier to use your fingers than talk to it. Get back to me when this becomes an important feature. Free Navigation Maybe this will be a bigger deal to me now that I'm getting a phone with GPS, but when using my buddy's 3gs, Google maps has worked just fine. Maybe I just don't trust turn-by-turn navigation enough to want it. Dashboard The only legitimate complaint on this list, to me. iPhone's home screen is pathetic, doubly so for the iPad. What a waste of perfectly usable space. I also want to add notifications to this list. Android's notification panel is far superior to the iPhone's. I don't want to hunt all over my screen to find little red dots. Put 'em in one place, Apple.

    Read the article

  • Solaris 11 SRU / Update relationship explained, and blackout period on delivery of new bug fixes eliminated

    - by user12244672
    Relationship between SRUs and Update releases As you may know, Support Repository Updates (SRUs) for Oracle Solaris 11 are released monthly and are available to customers with an appropriate support contract.  SRUs primarily deliver bug fixes.  They may also deliver low risk feature enhancements. Solaris Update are typically released once or twice a year, containing support for new hardware, new software feature enhancements, and all bug fixes available at the time the Update content was finalized.  They also contain a significant number of new bug fixes, for issues found internally in Oracle and complex customer bug fixes which  require significant "soak" time to ensure their efficacy prior to release. Changes to SRU and Update Naming Conventions We're changing the naming convention of Update releases from a date based format such as Oracle Solaris 10 8/11 to a simpler "dot" version numbering, e.g. Oracle Solaris 11.1. Oracle Solaris 11 11/11 (i.e. the initial Oracle Solaris 11 release) may be referred to as 11.0. SRUs will simply be named as "dot.dot" releases, e.g. Oracle Solaris 11.1.1, for SRU1 after Oracle Solaris 11.1. Many Oracle products and infrastructure tools such as BugDB and MOS are tailored towards this "dot.dot" style of release naming, so these name changes align Oracle Solaris with these conventions. No Blackout Periods on Bug Fix Releases The Oracle Solaris 11 release process has been enhanced to eliminate blackout periods on the delivery of new bug fixes to customers. Previously, Oracle Solaris Updates were a superset of all preceding bug fix deliveries.  This made for a very simple update message - that which releases later is always a superset of that which was delivered previously. However, it had a downside.  Once the contents of an Update release were frozen prior to release, the release of new bug fixes for customer issues was also frozen to maintain the Update's superset relationship. Since the amount of change allowed into the final internal builds of an Update release is reduced to mitigate risk, this throttling back also impacted the release of new bug fixes to customers. This meant that there was effectively a 6 to 9 week hiatus on the release of new bug fixes prior to the release of each Update.  That wasn't good for customers awaiting critical bug fixes. We've eliminated this hiatus on the delivery of new bug fixes in Oracle Solaris 11 by allowing new bug fixes to continue to be released in SRUs even after the contents of the next Update release have been frozen. The release of SRUs will remain contiguous, with the first SRU released after the Update release effectively being a superset of both the the Update release and all preceding SRUs*.  That is, later SRUs are supersets of the content of previous SRUs. Therefore, the progression path from the final SRUs prior to the Update release is to the first SRU after the Update release, rather than to the Update release itself. The timeline / logical sequence of releases can be shown as follows: Updates: 11.0                                                11.1                               11.2     etc.                  \                                                         \                                    \ SRUs:       11.0.1, 11.0.2,...,11.0.12, 11.0.13, 11.1.1, 11.1.2,...,11.1.x, 11.2.1, etc. For example, for systems with Oracle Solaris 11 11/11 SRU12.4 or later installed, the recommended update path is to Oracle Solaris 11.1.1 (i.e. SRU1 after Solaris 11.1) or later rather than to the Solaris 11.1 release itself.  This will ensure no bug fixes are "lost" during the update. If for any reason you do wish to update from SRU12.4 or later to the 11.1 release itself - for example to update a test system - the instructions to do so are in the SRU12.4 README, https://updates.oracle.com/Orion/Services/download?type=readme&aru=15564533 For systems with Oracle Solaris 11 11/11 SRU11.4 or earlier installed, customers can update to either the 11.1 release or any 11.1 SRU as both will be supersets of their current version. Please do read the README of the SRU you are updating to, as it will contain important installation instructions which will save you time and effort. *Nerdy details: SRUs only contain the latest change delta relative to the Update on which they are based.  Their dependencies will, however, effectively pull in the Update content.  Customers maintaining a local Repo (e.g. behind their firewall), need to add both the 11.1 content and the relevant SRU content to their Repo, to enable the SRU's dependencies to be resolved.  Both will be available from the standard Support Repo and from MOS.  This is no different to existing SRUs for Oracle Solaris 11.0, whereby you may often get away with using just the SRU content to update, but the original 11.0 content may be needed in the Repo to resolve dependencies.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Checking who is connected to your server, with PowerShell.

    - by Fatherjack
    There are many occasions when, as a DBA, you want to see who is connected to your SQL Server, along with how they are connecting and what sort of activities they are carrying out. I’m going to look at a couple of ways of getting this information and compare the effort required and the results achieved of each. SQL Server comes with a couple of stored procedures to help with this sort of task – sp_who and its undocumented counterpart sp_who2. There is also the pumped up version of these called sp_whoisactive, written by Adam Machanic which does way more than these procedures. I wholly recommend you try it out if you don’t already know how it works. When it comes to serious interrogation of your SQL Server activity then it is absolutely indispensable. Anyway, back to the point of this blog, we are going to look at getting the information from sp_who2 for a remote server. I wrote this Powershell script a week or so ago and was quietly happy with it for a while. I’m relatively new to Powershell so forgive both my rather low threshold for entertainment and the fact that something so simple is a moderate achievement for me. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server # connection and query stuff         $ConnectionStr = "Server=$Server;Database=Master;Integrated Security=True" $Query = "EXEC sp_who2" $Connection = new-object system.Data.SQLClient.SQLConnection $Table = new-object "System.Data.DataTable" $Connection.connectionstring = $ConnectionStr try{ $Connection.open() $Command = $Connection.CreateCommand() $Command.commandtext = $Query $result = $Command.ExecuteReader() $Table.Load($result) } catch{ # Show error $error[0] | format-list -Force } $Title = "Data access processes (" + $Table.Rows.Count + ")" $Table | Out-GridView -Title $Title $Connection.close() So this is pretty straightforward, create an SMO object that represents our chosen server, define a connection to the database and a table object for the results when we get them, execute our query over the connection, load the results into our table object and then, if everything is error free display these results to the PowerShell grid viewer. The query simply gets the results of ‘EXEC sp_who2′ for us. Depending on how many connections there are will influence how long the query runs. The grid viewer lets me sort and search the results so it can be a pretty handy way to locate troublesome connections. Like I say, I was quite pleased with this, it seems a pretty simple script and was working well for me, I have added a few parameters to control the output and give me more specific details but then I see a script that uses the $SMOServer object itself to provide the process information and saves having to define the connection object and query specifications. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server $Processes = $SMOServer.EnumProcesses() $Title = "SMO processes (" + $Processes.Rows.Count + ")" $Processes | Out-GridView -Title $Title Create the SMO object of our server and then call the EnumProcesses method to get all the process information from the server. Staggeringly simple! The results are a little different though. Some columns are the same and we can see the same basic information so my first thought was to which runs faster – so that I can get my results more quickly and also so that I place less stress on my server(s). PowerShell comes with a great way of testing this – the Measure-Command function. All you have to do is wrap your piece of code in Measure-Command {[your code here]} and it will spit out the time taken to execute the code. So, I placed both of the above methods of getting SQL Server process connections in two Measure-Command wrappers and pressed F5! The Powershell console goes blank for a while as the code is executed internally when Measure-Command is used but the grid viewer windows appear and the console shows this. You can take the output from Measure-Command and format it for easier reading but in a simple comparison like this we can simply cross refer the TotalMilliseconds values from the two result sets to see how the two methods performed. The query execution method (running EXEC sp_who2 ) is the first set of timings and the SMO EnumProcesses is the second. I have run these on a variety of servers and while the results vary from execution to execution I have never seen the SMO version slower than the other. The difference has varied and the time for both has ranged from sub-second as we see above to almost 5 seconds on other systems. This difference, I would suggest is partly due to the cost overhead of having to construct the data connection and so on where as the SMO EnumProcesses method has the connection to the server already in place and just needs to call back the process information. There is also the difference in the data sets to consider. Let’s take a look at what we get and where the two methods differ Query execution method (sp_who2) SMO EnumProcesses Description - Urn What looks like an XML or JSON representation of the server name and the process ID SPID Spid The process ID Status Status The status of the process Login Login The login name of the user executing the command HostName Host The name of the computer where the  process originated BlkBy BlockingSpid The SPID of a process that is blocking this one DBName Database The database that this process is connected to Command Command The type of command that is executing CPUTime Cpu The CPU activity related to this process DiskIO - The Disk IO activity related to this process LastBatch - The time the last batch was executed from this process. ProgramName Program The application that is facilitating the process connection to the SQL Server. SPID1 - In my experience this is always the same value as SPID. REQUESTID - In my experience this is always 0 - Name In my experience this is always the same value as SPID and so could be seen as analogous to SPID1 from sp_who2 - MemUsage An indication of the memory used by this process but I don’t know what it is measured in (bytes, Kb, Mb…) - IsSystem True or False depending on whether the process is internal to the SQL Server instance or has been created by an external connection requesting data. - ExecutionContextID In my experience this is always 0 so could be analogous to REQUESTID from sp_who2. Please note, these are my own very brief descriptions of these columns, detail can be found from MSDN for columns in the sp_who results here http://msdn.microsoft.com/en-GB/library/ms174313.aspx. Where the columns are common then I would use that description, in other cases then the information returned is purely for interpretation by the reader. Rather annoyingly both result sets have useful information that the other doesn’t. sp_who2 returns Disk IO and LastBatch information which is really useful but the SMO processes method give you IsSystem and MemUsage which have their place in fault diagnosis methods too. So which is better? On reflection I think I prefer to use the sp_who2 method primarily but knowing that the SMO Enumprocesses method is there when I need it is really useful and I’m sure I’ll use it regularly. I’m OK with the fact that it is the slower method because Measure-Command has shown me how close it is to the other option and that it really isn’t a large enough margin to matter.

    Read the article

  • Visual Studio 2010 Productivity Tips and Tricks&ndash;Part 1: Extensions

    - by ToStringTheory
    I don’t know about you, but when it comes to development, I prefer my environment to be as free of clutter as possible.  It may surprise you to know that I have tried ReSharper, and did not like it, for the reason that I stated above.  In my opinion, it had too much clutter.  Don’t get me wrong, there were a couple of features that I did like about it (inversion of if blocks, code feedback), but for the most part, I actually felt that it was slowing me down. Introduction Another large factor besides intrusiveness/speed in my choice to dislike ReSharper would probably be that I have become comfortable with my current setup and extensions.  I believe I have a good collection, and am quite happy with what I can accomplish in a short amount of time.  I figured that I would share some of my tips/findings regarding Visual Studio productivity here, and see what you had to say. The first section of things that I would like to cover, are Visual Studio Extensions.  In case you have been living under a rock for the past several years, Extensions are available under the Tools menu in Visual Studio: The extension manager enables integrated access to the Microsoft Visual Studio Gallery online with access to a few thousand different extensions.  I have tried many extensions, but for reasons of lack reliability, usability, or features, have uninstalled almost all of them.  However, I have come across several that I find I can not do without anymore: NuGet Package Manager (Microsoft) Perspectives (Adam Driscoll) Productivity Power Tools (Microsoft) Web Essentials (Mads Kristensen) Extensions NuGet Package Manager To be honest, I debated on whether or not to put this in here.  Most people seem to have it, however, there was a time when I didn’t, and was always confused when blogs/posts would say to right click and “Add Package Reference…” which with one of the latest updates is now “Manage NuGet Packages”.  So, if you haven’t downloaded the NuGet Package Manager yet, or don’t know what it is, I would highly suggest downloading it now! Features Simply put, the NuGet Package Manager gives you a GUI and command line to access different libraries that have been uploaded to NuGet. Some of its features include: Ability to search NuGet for packages via the GUI, with information in the detail bar on the right. Quick access to see what packages are in a solution, and what packages have updates available, with easy 1-click updating. If you download a package that requires references to work on other NuGet packages, they will be downloaded and referenced automatically. Productivity Tip If you use any type of source control in Visual Studio as well as using NuGet packages, be sure to right-click on the solution and click "Enable NuGet Package Restore". What this does is add a NuGet package to the solution so that it will be checked in along side your solution, as well as automatically grab packages from NuGet on build if needed. This is an extremely simple system to use to manage your package references, instead of having to manually go into TFS and add the Packages folder. Perspectives I can't stand developing with just one monitor. Especially if it comes to debugging. The great thing about Visual Studio 2010, is that all of the panels and windows are floatable, and can dock to other screens. The only bad thing is, I don't use the same toolset with everything that I am doing. By this, I mean that I don't use all of the same windows for debugging a web application, as I do for coding a WPF application. Only thing is, Visual Studio doesn't save the screen positions for all of the undocked windows. So, I got curious one day and decided to check and see if there was an extension to help out. This is where I found Perspectives. Features Perspectives gives you the ability to configure window positions across any or your monitors, and then to save the positions in a profile. Perspectives offers a Panel to manage different presets/favorites, and a toolbar to add to the toolbars at the top of Visual Studio. Ability to 'Favorite' a profile to add it to the perspectives toolbar. Productivity Tip Take the time to setup profiles for each of your scenarios - debugging web/winforms/xaml, coding, maintenance, etc. Try to remember to use the profiles for a few days, and at the end of a week, you may find that your productivity was never better. Productivity Power Tools Ah, the Productivity Power Tools... Quite possibly one of my most used extensions, if not my most used. The tool pack gives you a variety of enhancements ranging from key shortcuts, interface tweaks, and completely new features to Visual Studio 2010. Features I don't want to bore you with all of the features here, so here are my favorite: Quick Find - Unobtrusive search box in upper-right corner of the code window. Great for searching in general, especially in a file. Solution Navigator - The 'Solution Explorer' on steroids. Easy to search for files, see defined members/properties/methods in files, and my favorite feature is the 'set as root' option. Updated 'Add Reference...' Dialog - This is probably my favorite enhancement period... The 'Add Reference...' dialog redone in a manner that resembles the Extension/Package managers. I especially love the ability to search through all of the references. "Ctrl - Click" for Definition - I am still getting used to this as I usually try to use my keyboard for everything, but I love the ability to hold Ctrl and turn property/methods/variables into hyperlinks, that you click on to see their definitions. Great for travelling down a rabbit hole in an application to research problems. While there are other commands/utilities, I find these to be the ones that I lean on the most for the usefulness. Web Essentials If you have do any type of web development in ASP .Net, ASP .Net MVC, even HTML, I highly suggest grabbing the Web Essentials right NOW! This extension alone is great for productivity in web development, and greatly decreases my development time on new features. Features Some of its best features include: CSS Previews - I say 'previews' because of the multiple kinds of previews in CSS that you get font-family, color, background/background-image previews. This is great for just tweaking UI slightly in different ways and seeing how they look in the CSS window at a glance. Live Preview - One word - awesome! This goes well with my multi-monitor setup. I put the site on one monitor in a Live Preview panel, and then as I make changes to CSS/cshtml/aspx/html, the preview window will update with each save/build automatically. For CSS, you can even turn on live-update, so as you are tweaking CSS, the style changes in real time. Great for tweaking colors or font-sizes. Outlining - Small, but I like to be able to collapse regions/declarations that are in the way of new work, or are just distracting. Commenting Shortcuts - I don't know why it wasn't included by default, but it is nice to have the key shortcuts for commenting working in the CSS editor as well. Productivity Tip When working on a site, hit CTRL-ALT-ENTER to launch the Live Preview window. Dock it to another monitor. When you make changes to the document/css, just save and glance at the other monitor. No need to alt tab, then alt tab before continuing editing. Conclusion These extensions are only the most useful and least intrusive - ones that I use every day. The great thing about Visual Studio 2010 is the extensibility options that it gives developers to utilize. Have an extension that you use that isn't intrusive, but isn't listed here? Please, feel free to comment. I love trying new things, and am always looking for new additions to my toolset of the most useful. Finally, please keep an eye out for Part 2 on key shortcuts in Visual Studio. Also, if you are visiting my site (http://tostringtheory.com || http://geekswithblogs.net/tostringtheory) from an actual browser and not a feed, please let me know what you think of the new styling!

    Read the article

  • How I Work: Staying Productive Whilst Traveling

    - by BuckWoody
    I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

    Read the article

  • I Know What I Did This Summer: Put Down Trex Decking

    - by thatjeffsmith
    If you’re wondering why I would bore everyone with my pictures and frequent status updates/tweets from the past week – it’s so I could document the process of refurbishing my deck, or what some would call a porch. When we go to take a vacation, buy a car, do anything – we also read personal blogs to get the real story. So, if you’re curious about what it takes to tackle this sort of project, read on. Skills/Equipment/Manpower We Possessed I took the old decking out by myself. I’m about 230 lbs, more than 6′ tall, and I’m pretty healthy. This took about 8 hours over two afternoons. Three of us put the deck back together. My wife has two engineering degrees. Her father also has two engineering degrees. Lots of brainpower available here. Also, her dad ran the public works department for a country for more than 20 years – so lots and lots of practical experience on hand. We had a compound mitre saw, a skilsaw, 2-3 crowbars, a framing hammer, 3 cordless drills, a corded drill, lots of sawhorses, a power sander, an angle grinder, a 10×10 Coleman canopy tent, a Ford F-150 pickup truck, outdoor speakers and lots of iTunes playlists, plenty of water and cold beer. Why We Did This Our deck was relatively young – it was built in 2005. However, the pressure treated boards must not have been adequately maintained before we bought the house. I had powerwashed the deck every other year and had it stained a few times. The boards just rotted. We’re going to be in the house for a long time, and we wanted something that would look nice and require little maintenance. More bad deck boards The deck boards were in bad shape Things We Learned The two most important things: The hidden fasteners have to be put in JUST right. Wedge them into the grooved board, then bend down the bit that is screwed down. We didn’t do this on the first board and couldn’t get the second board to fit nearly close enough. Watching the official TREX YouTube video helped immensely, and we should have watched that first. When pre-drilling holes for the boards that need screwed down – DO NOT pre-drill through the underlying framing wood. ONLY pre-drill through the TREX itself. The screw won’t seat in the board properly. Instead of sitting down flush with the board, it will stop at the top of the board and just spin. I had to call the the place that sold me the screws to find this out. So about a third of our screws look like crap. If it doesn’t look or feel right – stop everything and pick up your computer or your phone. It’s not right, and it will be much easier to stop and find out why. We didn’t do this, and now I’m going to see every screw that’s not flush with the boards and get upset. Oh well. The Process How much time did it take? Well I spent about 8 hours taking the deck apart. And then the 3 of use spent 8 hours the first day, 10 hours the second day, 8 hours the third, and another 6 hours on the fourth day. That’s like 104 man-hours. We supposedly saved four or five thousand dollars in labor, but don’t do the math here or you might get a bit upset. The main thing is that we got what we wanted, and there won’t be any surprises later. Now for some pictures… This 6”+ pry bar made the destruction of the old deck much easier Most of the joists, once exposed, were OK. This joist wasn’t sitting on ANYTHING before. We think a lazy gas person cut the board to sneak a gas line in. Awesome… These monster lag bolts had to be accounted for when putting in the additional framing The border pattern Sheri wanted to put in required a lot more framing. These were the first boards to go down – we screwed them in as there was no way to attach clips I sat, kicked in the boards, and then drilled these clips in – but my wife was able to go MUCH faster by using her hands to lock the boards in and drill on her knees. I liked locking the board in with my feet when they needed to be ‘encouraged’ to go straight. The first board took FOREVER to go in, but then when we got rolling, we were able to put in a 20′ board in less than 10 minutes. This was end of construction day #2 – we got much further than we thought we would. Ah, the dreaded last 10% – what to do here? Remember those ‘floating’ stringers? Yeah, we fixed that up a bit, too. My wife used a website (and her brain) to calculate exactly how to cut the stringers to give us the rise/run we needed with the proper clearance and all that jazz. The stairs with stringers and toe kicks – this was worth the effort It started raining on us as I screwed down the steps – this we managed to get our shade tent up on the deck to protect us from the rain too The stairs, finished Finished, mostly Good corner shot The top of the stairs Stairs, looking down Celebratory beer In Summary There are a few things we’re not happy with. I think we can fix them up – but later. I have a few things left to finish, rewire the lighting, get the gas grille put back in, and rehang some screen doors. I was expecting this to be a lot worse than it was. If I didn’t have the help, I would have never done it myself. But I’m glad that I did have that help and did do that project. It’s not often you get to spend that kind of qualify time with family and building cool stuff.

    Read the article

  • Advice for a distracted, unhappy, recently graduated programmer? [closed]

    - by Re-Invent
    I graduated 4 months ago. I had offers from a few good places to work at. At the same time I wanted to stick to building a small software business of my own, still have some ideas with good potential, some half done projects frozen in my github. But due to social pressures, I chose a job, the pay is great, but I am half-passionate about it. A small team of smart folks building useful product, working out contracts across the world. I've started finding it extremely boring. Boring to the extent that I skip 2-3 days a week together not doing work. Neither do I spend that time progressing any of my own projects. Yes, I feel stupid at the way I'm wasting time, but I don't understand exactly why is it happening. It's as if all the excitement has been drained. What can I do about it? Long version: School - I was in third standard. Only students, 6th grade had access to computer labs. I once peeked into the lab from the little door opening. No hard-disks, MS DOS on 5 1/2 inch floppies. I asked a senior student to play some sound in BASIC. He used PLAY to compose a tune. Boy! I was so excited, I was jumping from within. Back home, asked my brother to teach me some programming. We bought a book "MODERN All About GW-BASIC for Schools & Colleges". The book had everything, right from printing, to taking input, file i/o, game programming, machine level support, etc. I was in 6th standard, wrote my first game - a wheel of fortune, rotated the wheel by manipulating 16 color palette's definition. Got internet soon, got hooked to QuickBasic programming community. Made some more games "007 in Danger", "Car Crush 2" for submission to allbasiccode archives. I was extremely excited about all this. My interests now swayed into "hacking" (computer security). Taught myself some perl, found it annoying, learnt PHP and a bit of SQL. Also taught myself Visual Basic one of the winters and wrote a pacman clone with Direct X. By the time I was in 10th standard, I created some evil tools using visual basic, php and mysql and eventually landed myself into an unpaid side-job at a government facility, building evil tools for them. It was a dream come true for crackers of that time. And so was I, still very excited. Things changed soon, last two years of school were not so great as I was balancing preps for college, work at govt. and studies for school at same time. College - College was opposite of all I had wished it to be. I imagined it to be a place where I'd spend my 4 years building something awesome. It was rather an epitome of rote learning, attendance, rules, busy schedules, ban on personal laptops, hardly any hackers surrounding you and shit like that. We had to take permissions to even introduce some cultural/creative activities in our annual schedule. The labs won't be open on weekends because the lab employees had to have their leaves. Yes, a horrible place for someone like me. I still managed to pull out a project with a friend over 2 months. Showed it to people high in the academia hierarchy. They were immensely impressed, we proposed to allow personal computers for students. They made up half-assed reasons and didn't agree. We felt frustrated. And so on, I still managed to teach myself new languages, do new projects of my own, do an intern at the same govt. facility, start a small business for sometime, give a talk at a conference I'm passionate about, win game-dev and hacking contest at most respected colleges, solve good deal of programming contest problems, etc. At the same time I was not content with all these restrictions, great emphasis on rote learning, and sheer wastage of time due to college. I never felt I was overdoing, but now I feel I burnt myself out. During my last days at college, I did an intern at a bigco. While I spent my time building prototypes for certain LBS, the other interns around me, even a good friend, was just skipping time. I thought maybe, in a few weeks he would put in some serious efforts at work assigned to him, but all he did was to find creative ways to skip work, hide his face from manager, engage people in talks if they try to question his progress, etc. I tried a few time to get him on track, but it seems all he wanted was to "not to work hard at all and still reap the fruits". I don't know how others take such people, but I find their vicinity very very poisonous to one's own motivation and productivity. Over that, the place where I come from, HRs don't give much value to what have you done past 4 years. So towards the end of out intern, we all were offered work at the bigco, but the slacker, even after not writing more than 200 lines of code was made a much better offer. I felt enraged instantly - "Is this how the corp world treats someone who does fruitful, if not extra-ordinary work form them for past 6 months?". Yes, I did try to negotiate and debate. The bigcos seem blind due to departmentalization of responsibilities and many layers of management. I decided not to be in touch with any characters of that depressing play. Probably the busy time I had at college, ignoring friends, ignoring fun and squeezing every bit of free time for myself is also responsible. Probably this is what has drained all my willingness to work for anyone. I find my day job boring, at the same time I with to maintain it for financial reasons. I feel a bit burnt out, unsatisfied and at the same time an urge to quit working for someone else and start finishing my frozen side-projects (which may be profitable). Though I haven't got much to support myself with food, office, internet bills, etc in savings. I still have my day job, but I don't find it very interesting, even though the pay is higher than the slacker, I don't find money to be a great motivator here. I keep comparing myself to my past version. I wonder how to get rid of this and reboot myself back to the way I was in school days - excited about it, tinkering, building, learning new things daily, and NOT BORED?

    Read the article

  • Simplifying Human Capital Management with Mobile Applications

    - by HCM-Oracle
    By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

    Read the article

  • Introduction to Human Workflow 11g

    - by agiovannetti
    Human Workflow is a component of SOA Suite just like BPEL, Mediator, Business Rules, etc. The Human Workflow component allows you to incorporate human intervention in a business process. You can use Human Workflow to create a business process that requires a manager to approve purchase orders greater than $10,000; or a business process that handles article reviews in which a group of reviewers need to vote/approve an article before it gets published. Human Workflow can handle the task assignment and routing as well as the generation of notifications to the participants. There are three common patterns or usages of Human Workflow: 1) Approval Scenarios: manage documents and other transactional data through approval chains . For example: approve expense report, vacation approval, hiring approval, etc. 2) Reviews by multiple users or groups: group collaboration and review of documents or proposals. For example, processing a sales quote which is subject to review by multiple people. 3) Case Management: workflows around work management or case management. For example, processing a service request. This could be routed to various people who all need to modify the task. It may also incorporate ad hoc routing which is unknown at design time. SOA 11g Human Workflow includes the following features: Assignment and routing of tasks to the correct users or groups. Deadlines, escalations, notifications, and other features required for ensuring the timely performance of a task. Presentation of tasks to end users through a variety of mechanisms, including a Worklist application. Organization, filtering, prioritization and other features required for end users to productively perform their tasks. Reports, reassignments, load balancing and other features required by supervisors and business owners to manage the performance of tasks. Human Workflow Architecture The Human Workflow component is divided into 3 modules: the service interface, the task definition and the client interface module. The Service Interface handles the interaction with BPEL and other components. The Client Interface handles the presentation of task data through clients like the Worklist application, portals and notification channels. The task definition module is in charge of managing the lifecycle of a task. Who should get the task assigned? What should happen next with the task? When must the task be completed? Should the task be escalated?, etc Stages and Participants When you create a Human Task you need to specify how the task is assigned and routed. The first step is to define the stages and participants. A stage is just a logical group. A participant can be a user, a group of users or an application role. The participants indicate the type of assignment and routing that will be performed. Stages can be sequential or in parallel. You can combine them to create any usage you require. See diagram below: Assignment and Routing There are different ways a task can be assigned and routed: Single Approver: task is assigned to a single user, group or role. For example, a vacation request is assigned to a manager. If the manager approves or rejects the request, the employee is notified with the decision. If the task is assigned to a group then once one of managers acts on it, the task is completed. Parallel : task is assigned to a set of people that must work in parallel. This is commonly used for voting. For example, a task gets approved once 50% of the participants approve it. You can also set it up to be a unanimous vote. Serial : participants must work in sequence. The most common scenario for this is management chain escalation. FYI (For Your Information) : task is assigned to participants who can view it, add comments and attachments, but can not modify or complete the task. Task Actions The following is the list of actions that can be performed on a task: Claim : if a task is assigned to a group or multiple users, then the task must be claimed first to be able to act on it. Escalate : if the participant is not able to complete a task, he/she can escalate it. The task is reassigned to his/her manager (up one level in a hierarchy). Pushback : the task is sent back to the previous assignee. Reassign :if the participant is a manager, he/she can delegate a task to his/her reports. Release : if a task is assigned to a group or multiple users, it can be released if the user who claimed the task cannot complete the task. Any of the other assignees can claim and complete the task. Request Information and Submit Information : use when the participant needs to supply more information or to request more information from the task creator or any of the previous assignees. Suspend and Resume :if a task is not relevant, it can be suspended. A suspension is indefinite. It does not expire until Resume is used to resume working on the task. Withdraw : if the creator of a task does not want to continue with it, for example, he wants to cancel a vacation request, he can withdraw the task. The business process determines what happens next. Renew : if a task is about to expire, the participant can renew it. The task expiration date is extended one week. Notifications Human Workflow provides a mechanism for sending notifications to participants to alert them of changes on a task. Notifications can be sent via email, telephone voice message, instant messaging (IM) or short message service (SMS). Notifications can be sent when the task status changes to any of the following: Assigned/renewed/delegated/reassigned/escalated Completed Error Expired Request Info Resume Suspended Added/Updated comments and/or attachments Updated Outcome Withdraw Other Actions (e.g. acquiring a task) Here is an example of an email notification: Worklist Application Oracle BPM Worklist application is the default user interface included in SOA Suite. It allows users to access and act on tasks that have been assigned to them. For example, from the Worklist application, a loan agent can review loan applications or a manager can approve employee vacation requests. Through the Worklist Application users can: Perform authorized actions on tasks, acquire and check out shared tasks, define personal to-do tasks and define subtasks. Filter tasks view based on various criteria. Work with standard work queues, such as high priority tasks, tasks due soon and so on. Work queues allow users to create a custom view to group a subset of tasks in the worklist, for example, high priority tasks, tasks due in 24 hours, expense approval tasks and more. Define custom work queues. Gain proxy access to part of another user's tasks. Define custom vacation rules and delegation rules. Enable group owners to define task dispatching rules for shared tasks. Collect a complete workflow history and audit trail. Use digital signatures for tasks. Run reports like Unattended tasks, Tasks productivity, etc. Here is a screenshoot of what the Worklist Application looks like. On the right hand side you can see the tasks that have been assigned to the user and the task's detail. References Introduction to SOA Suite 11g Human Workflow Webcast Note 1452937.2 Human Workflow Information Center Using the Human Workflow Service Component 11.1.1.6 Human Workflow Samples Human Workflow APIs Java Docs

    Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >