Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 292/808 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

• Remote access to a KVM Ubuntu virtual server

  - by Lee

  I've just setup an ubuntu virtual server and everything seems to be working fine. I used KVM to get it working with a bridged network. I've given the virtual server a static ip address on my network. I don't seem to be able to connect to the virtual machine though from outside my network. If I'm on my own network it all works fine, I can ping the ip and connect to it. The virtual server can ping other machines and sites on the internet. I changed the port forwarding rules on my router to forward any connections on a specific port to the virtual server ip address thinking that was the problem, but it was still the same. Is there something I'm missing here which is blocking outside connections to the virtual machine? Thanks.

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• Setting up a linux switch

  - by Shahmir Javaid

  I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

  Read the article

• Access port on machine by connecting to other machine via SSH?

  - by piquadrat

  I have to access my home router's web interface on port 80. Unfortunately, the only way into the network I have at the moment is SSH to another machine on the same network. me ---|---SSH Box----Home Router My Google foo seems to have abandoned me, I couldn't didn't find anything helpful. Any ideas? Thanks! To clarify: I'm not at home right now. I do however have access to one machine on the network (a QNAP NAS) over SSH. I need to access the home router web interface on port 80 from my notebook which is outside of the home network.

  Read the article

• Fix static ip address problems in Ubuntu 10.04

  - by jane

  I used Network Manager in Ubuntu 10.04 to set a static ip address and assigned one that was already in use. Now my computer will not boot (nfs crashes). I booted from a live cd to change the configuration on the file system in /etc/network/interfaces but the file looks to be the default. Where does the network manager (the gui from system- preferences) store it's configuration so I can overwrite it and enter the correct ip addresss and have a happy working computer again. thanks!!

  Read the article

• Does a single LACP channel over multiple switches increase redundancy?

  - by Sirch

  I am curious for opinions, findings, or evidence that having multiple interfaces bonded using LACP to ports in multiple switches can increase redundancy. Previously bonded interfaces have always been to a single switch, with a redundant channel to another port. Without getting into vendor specifics, my thought is that as this is a single LACP, the likelihood that an event or change could lead to a wide service outage. Without having the spare equipment or time to test this single channel over diverse switches, could anyone with a greater networking knowledge than myself, tell me if there a network side event that would bring down the network connectivity to a server that had created a bonded interface to two ports on separate switches? Does the use of bonded ethernet channels across multiple switches (that we are advised that we can use) from the server, provide both improved throughput (unquestionably), and improved redundancy (uncertain). Could/would network events such as switch failure, port migration, patching, recovery, etc, cause the channel for both server network interfaces to be unavailable? Thanks in advance.

  Read the article

• Routing with VPN and asymmetric communication

  - by Louis

  I'm stumbling on a problem that requires your advice. Keywords : networking, route, openVPN Problem : I have a local network with several physical servers and VMs. These machines have ip's in the range 10.10.x.x. I can access these machines from the Internet with the help of openVPN. These machines can : access each other within the local 10.10.x.x subnet access the Internet via the VPN can themselves be accessed (via SSH) from the Internet via the VPN. There is one machine however that behaves strangely and I don't know why. I can SSH into this machine from anywhere via SSH and I can also PING it from anywhere (including the Internet). However from this machine (i.e. when logged into it) I cannot access the Internet or ping machines outside the local network. In other words it will not go beyond the VPN. My question is why? Here are some technical details: The machine's Network Config (running Debian 6.0.3): allow-hotplug eth0 iface eth0 inet static address 10.10.10.200 netmask 255.255.0.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.200 The machine's Routing : Destination Gateway Genmask Flags MSS Window irtt Iface 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.10.0.0 10.10.10.250 255.255.0.0 UG 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.10.10.200 0.0.0.0 UG 0 0 0 eth0 The VPN's Network Config (running Debian 6.0.3): # This is the local network interface auto eth1 allow-hotplug eth1 iface eth1 inet static address 10.10.10.250 netmask 255.255.0.0 broadcast 10.10.10.255 gateway 10.10.10.250 The VPN's routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0 private 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 private 0.0.0.0 UG 0 0 0 eth0 net.ipv4.ip_forward = 1 on both machines. there are no iptables set anywhere. Thanks in advance for any feedback.

  Read the article

• Two DHCP Servers, Block Clients for one of them?

  - by Rilindo

  I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

• Alternate Out of Order TCP Packets problem

  - by Sunil

  I am having a network of windows and embedded nodes connected on a series of cisco switch. I have been seeing some serious network problems from few days. Used wireshark to capture the network trace and see every alternate tcp packets being marked as "out of order". Any pointers on how to troubleshoot this problem?

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• Change TCP wait for ACK timeouts in Win7/WinServer

  - by maseth

  Is there any possibility to change default wait for ACK timeout in TCP network on Windows 7 or Windows Server ? I'm using very slow network ( 1200 bps ) and want to tweak TCP. When using default parameters network stuck on multiple retransmissions . If I'm able to change the ACK timeout and tx window size I think that it would work. On Windows XP it was possible but cant find any document for Win7 and Win Server.

  Read the article

• Essential Business Server

  - by Dan

  We are trying to run the Preparation Wizard for Essential Business Server 2008 and receive the following error. "A list of servers could not be collected from Active Directory Domain Services (AD DS). Ensure that your network is functioning correctly and that this computer can access AD DS." Our network is an Windows Server 2003 network with all of the services running fine. I can't run this from either a machine or a server. Any idea where we should start?

  Read the article

• Add second ip address to an existing SQl 2008 failover clustering

  - by Cédric Boivin

  Hello, I got actually a failover cluster on Windows Server 2008, with sql server 2008. On each server i got two network card, with two different network one are on 10.10.10.x and other are on 192.168.99.x I want my sqlserver cluster listen on the two network. Is it possible and how i add new ip address. When i add a new ip address directly in the cluster, and i do a telnet on the 1433 port with the new cluster ip address it's not working. Thanks

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• How to make XAMPP virtual hosts accessible to VM's and other computers on LAN?

  - by martin's

  XAMPP running on Vista 64 Ultimate dev machine (don't think it matters). Machine / Browser configuration Safari, Firefox, Chrome and IE9 on dev machine IE7 and IE8 on separate XP Pro VM's (VMWare on dev machine) IE10 and Chrome on Windows 8 VM (VMware on dev machine) Safari, Firefox and Chrome running on a iMac (same network as dev) Safari, Firefox and Chrome running on a couple of Mac Pro's (same network as dev) IE7, IE8, IE9 running on other PC's on the same network as dev machine Development Configuration Multiple virtual hosts for different projects .local fake TLD for development No firewall restrictions on dev machine for Apache Some sites have .htaccess mapping www to non-www Port 80 is open in the dev machine's firewall Problem XAMPP local home page (http://192.168.1.98/xampp/) can be accessed from everywhere, real or virtual, by IP All .local sites can be accessed from the browsers on the dev machine. All .local sites can be accessed form the browsers in the XP VM's. Some .local sites cannot be accessed from IE10 or Chrome on the W8 VM Sites that cannot be accessed from W8 VM have a minimal .htaccess file No .local sites can be accessed from ANY machine (PC or Mac) on the LAN hosts on dev machine (relevant excerpt) 127.0.0.1 site1.local 127.0.0.1 site2.local 127.0.0.1 site3.local 127.0.0.1 site4.local 127.0.0.1 site5.local 127.0.0.1 site6.local 127.0.0.1 site7.local 127.0.0.1 site8.local 127.0.0.1 site9.local 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local httpd-vhosts.conf on dev machine (relevant excerpt) NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost ServerAlias localhost *.localhost.* DocumentRoot D:/xampp/htdocs </VirtualHost> # ======================================== site1.local <VirtualHost *:80> ServerName site1.local ServerAlias site1.local *.site1.local DocumentRoot D:/xampp-sites/site1/public_html ErrorLog D:/xampp-sites/site1/logs/access.log CustomLog D:/xampp-sites/site1/logs/error.log combined <Directory D:/xampp-sites/site1> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory> </VirtualHost> NOTE: The above <VirtualHost *:80> block is repeated for each of the nine virtual hosts in the file, no sense in posting it here. hosts on all VM's and physical machines on the network (relevant excerpt) 127.0.0.1 localhost ::1 localhost 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local None of the VM's have any firewall blocks on http traffic. They can reach any site on the real Internet. The same is true of the real machines on the network. The biggest puzzle perhaps is that the W8 VM actually DOES reach some of the virtual hosts. It does NOT reach site2, site6 and site 9, all of which have this minimal .htaccess file. .htaccess file <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </IfModule> Adding this file to any of the virtual hosts that do work on the W8 VM will break the site (only for W8 VM, not the XP VM's) and require a cache flush on the W8 VM before it will see the site again after deleting the file. Regardless of whether a .htaccess file exists or not, no machine on the same LAN can access anything other than the XAMPP home page via IP. Even with hosts files on all machines. I can ping any virtual host from any machine on the network and get a response from the correct IP address. I can't see anything in out Netgear router that might prevent one machine from reaching the other. Besides, once the local hosts file resolves to an ip address that's all that goes out onto the local network. I've gone through an extensive number of posts on both SO and as the result of Google searches. I can't say that I have found anything definitive anywhere.

  Read the article

• How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

  - by Gizmo

  I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

  Read the article

• Random timeout now and then

  - by KenavR

  Maybe this is a to generic question, but since we have this issue for quite a while now, I give it a shot. We have some applications which use HTTP for the connection between the client (website or fat-client) and the server. The Computer who runs this applications is in a Network behind a firewall and a proxy, the server isn't inside the same network. The problem is that every now and then the https Request times out and depending on the Client the Application "hangs" or does some other funky stuff. The problem is definitely inside our network, because if i try the applications outside our network it works fine. Can you give me a hint where i can most likely find the problem?

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• Failure Scenarios in IP networks [closed]

  - by Karthik

  I am searching for a list of faults that may occur in a traditional IP network. To give you a better understanding of what I am looking for: For an MPLS-IP network the set of faults may be something as given in this cisco site. I want pointers to such kind of faults for a traditional IP network. Individual suggestions from you are welcome, but in doing so, please also provide a link to the official site from which you came with those failure scenarios.

  Read the article

• Proxy Server suggestions

  - by Jon Menefee

  Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

  Read the article

• Internet connection issues after installing Windows Phone 8 SDK

  - by Mosquito

  first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

  Read the article

• (Windows 7) Dial Up Connection Locks up the Networking Service

  - by Nick

  I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

  Read the article

• An unknown Mac is connected to my router?

  - by Yar

  There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

  Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >