Search Results

Search found 68400 results on 2736 pages for 'industry data model'.

Page 293/2736 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• Routing all data through an VPN tunnel with ppp

  - by Oliver

  I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

  Read the article

• LdapErr: DSID-0C0903AA, data 52e: authenticating against AD '08 with pam_ldap

  - by Stefan M

  I have full admin access to the AD '08 server I'm trying to authenticate towards. The error code means invalid credentials, but I wish this was as simple as me typing in the wrong password. First of all, I have a working Apache mod_ldap configuration against the same domain. AuthType basic AuthName "MYDOMAIN" AuthBasicProvider ldap AuthLDAPUrl "ldap://10.220.100.10/OU=Companies,MYCOMPANY,DC=southit,DC=inet?sAMAccountName?sub?(objectClass=user)" AuthLDAPBindDN svc_webaccess_auth AuthLDAPBindPassword mySvcWebAccessPassword Require ldap-group CN=Service_WebAccess,OU=Groups,OU=MYCOMPANY,DC=southit,DC=inet I'm showing this because it works without the use of any Kerberos, as so many other guides out there recommend for system authentication to AD. Now I want to translate this into pam_ldap.conf for use with OpenSSH. The /etc/pam.d/common-auth part is simple. auth sufficient pam_ldap.so debug This line is processed before any other. I believe the real issue is configuring pam_ldap.conf. host 10.220.100.10 base OU=Companies,MYCOMPANY,DC=southit,DC=inet ldap_version 3 binddn svc_webaccess_auth bindpw mySvcWebAccessPassword scope sub timelimit 30 pam_filter objectclass=User nss_map_attribute uid sAMAccountName pam_login_attribute sAMAccountName pam_password ad Now I've been monitoring ldap traffic on the AD host using wireshark. I've captured a successful session from Apache's mod_ldap and compared it to a failed session from pam_ldap. The first bindrequest is a success using the svc_webaccess_auth account, the searchrequest is a success and returns a result of 1. The last bindrequest using my user is a failure and returns the above error code. Everything looks identical except for this one line in the filter for the searchrequest, here showing mod_ldap. Filter: (&(objectClass=user)(sAMAccountName=ivasta)) The second one is pam_ldap. Filter: (&(&(objectclass=User)(objectclass=User))(sAMAccountName=ivasta)) My user is named ivasta. However, the searchrequest does not return failure, it does return 1 result. I've also tried this with ldapsearch on the cli. It's the bindrequest that follows the searchrequest that fails with the above error code 52e. Here is the failure message of the final bindrequest. resultcode: invalidcredentials (49) 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 52e, v1772 This should mean invalid password but I've tried with other users and with very simple passwords. Does anyone recognize this from their own struggles with pam_ldap and AD? Edit: Worth noting is that I've also tried pam_password crypt, and pam_filter sAMAccountName=User because this worked when using ldapsearch. ldapsearch -LLL -h 10.220.100.10 -x -b "ou=Users,ou=mycompany,dc=southit,dc=inet" -v -s sub -D svc_webaccess_auth -W '(sAMAccountName=ivasta)' This works using the svc_webaccess_auth account password. This account has scan access to that OU for use with apache's mod_ldap.

  Read the article

• What is the difference between "data hiding" and "encapsulation"?

  - by Software Engeneering Learner

  I'm reading "Java concurrency in practice" and there is said: "Fortunately, the same object-oriented techniques that help you write well-organized, maintainable classes - such as encapsulation and data hiding -can also help you create thread-safe classes." The problem #1 - I never heard about data hiding and don't know what it is. The problem #2 - I always thought that encapsulation is using private vs public, and is actually the data hiding. Can you please explain what data hiding is and how it differs from encapsulation?

  Read the article

• Normal vector of a face loaded from an FBX model during collision?

  - by Corey Ogburn

  I'm loading a simple 6 sided cube from a UV-mapped FBX model and I'm using a BoundingBox to test for collisions. Once I determine there's a collision, I want to use the normal vector of the collided surface to correct the movement of whatever collided with the cube. I suppose this is a two-part question: 1) How can I determine which face of the cube was collided with in a collision? 2) How can I get the normal vector of that surface?

  Read the article

• Weird appearance for a 3D XNA ground

  - by Belos

  I wanted to add a ground so I can know the position of a helicopter in the world. But the ground appeared in a weird way: http://i.stack.imgur.com/yTSuW.jpg The ground had the following texture: http://i.stack.imgur.com/pdpxB.png EDIT: Sorry, I forgot to post the code: public class ImportModel { public Vector3 Position { get; set; } public Vector3 Rotation { get; set; } public Vector3 Scale { get; set; } Model Model; Matrix[] modeltransforms; GraphicsDevice GraphicDevice; ContentManager Content; BoundingSphere sphere; bool boundingimplemented = false; public ImportModel(string model, GraphicsDevice gd, ContentManager cm, Vector3 position, Vector3 rot, Vector3 sca) { GraphicDevice = gd; Content = cm; Position = position; Rotation = rot; Scale = sca; Model = Content.Load<Model>(model); modeltransforms = new Matrix[Model.Bones.Count]; Model.CopyAbsoluteBoneTransformsTo(modeltransforms); } public void Draw(Camera camera) { Matrix baseworld = Matrix.CreateScale(Scale) * Matrix.CreateFromYawPitchRoll(Rotation.Y, Rotation.X, Rotation.Z) * Matrix.CreateTranslation(Position); foreach (ModelMesh mesh in Model.Meshes) { Matrix localworld = modeltransforms[mesh.ParentBone.Index] * baseworld; foreach (ModelMeshPart meshpart in mesh.MeshParts) { BasicEffect effect = (BasicEffect)meshpart.Effect; effect.World = localworld; effect.View = camera.View; effect.Projection = camera.Projection; effect.EnableDefaultLighting(); } mesh.Draw(); } } public BoundingSphere BoundingSphere { get { if (!boundingimplemented) { foreach (ModelMesh mesh in Model.Meshes) { BoundingSphere transformed = mesh.BoundingSphere.Transform( modeltransforms[mesh.ParentBone.Index]); sphere = BoundingSphere.CreateMerged(sphere, transformed); } Matrix worldTransform = Matrix.CreateScale(Scale) * Matrix.CreateTranslation(Position); BoundingSphere transforme = sphere; transforme = transforme.Transform(worldTransform); return transforme; } else { Matrix worldTransform = Matrix.CreateScale(Scale) * Matrix.CreateTranslation(Position); BoundingSphere transformed = sphere; transformed = transformed.Transform(worldTransform); return transformed; } } } } Then I call the class from the Game1 class: ImportModel ground = new ImportModel("ground", GraphicsDevice, Content, Vector3.Zero, Vector3.Zero, new Vector3(20f)); EDIT2:This is how the scene looks from top: i.stack.imgur.com/Hs983.jpg

  Read the article

• La victoire de Microsoft sur le FBI est aussi une victoire pour les entreprises adeptes du même business model mais pas pour les petites entreprises

  La victoire de Microsoft sur le FBI est aussi une victoire pour les entreprises adeptes du même business model mais pas pour les petites entreprises et les startupsLes révélations d'Edward Snowden ont eu pour conséquences d'ébranler la confiance des clients, en la capacité des géants de l'IT à garder leurs données confidentielles, toutefois Microsoft a tenté de remonter la pente en annonçant une série de mesure pour contrer les actions des agences gouvernementales US : le FBI et la NSA.Le bras...

  Read the article

• Serialized values or separate table, which is more efficient?

  - by Aravind

  I have a Rails model email_condition_string with a word column in it. Now I have another model called request_creation_email_config with the following columns admin_filter_group:references vendor_service:references email_condition_string:references email_condition_string has many request_creation_email_config and request_creation_email_config belongs to email_condition_string. Instead of this model a colleague of mine is suggesting that strong the word inside the same model as comma separated values is efficient than storing as a separate model. Is that alright?

  Read the article

• Gerrit code review, or Github's fork and pull model?

  - by user1366476

  I am starting a software project that will be team AND community developed. I was previously sold on gerrit, but now github's fork and pull request model seem to almost provide more tools, ways to visualize commits, and ease of use. For someone who has at least a little experience with both, what are the pros/cons of each, and which would be better for a team based project which wants to leave open the possibility for community development?

  Read the article

• Is it dangerous for me to give some of my Model classes Control-like methods?

  - by Pureferret

  In my personal project I have tried to stick to MVC, but I've also been made aware that sticking to MVC too tightly can be a bad thing as it makes writing awkward and forces the flow of the program in odd ways (i.e. some simple functions can be performed by something that normally wouldn't, and avoid MVC related overheads). So I'm beginning to feel justified in this compromise: I have some 'manager programs' that 'own' data and have some way to manipulate it, as such I think they'd count as both part of the model, and part of the control, and to me this feels more natural than keepingthem separate. For instance: One of my Managers is the PlayerCharacterManager that has these methods: void buySkill(PlayerCharacter playerCharacter, Skill skill); void changeName(); void changeRole(); void restatCharacter(); void addCharacterToGame(); void createNewCharacter(); PlayerCharacter getPlayerCharacter(); List<PlayerCharacter> getPlayersCharacter(Player player); List<PlayerCharacter> getAllCharacters(); I hope the mothod names are transparent enough that they don't all need explaining. I've called it a manager because it will help manage all of the PlayerCharacter 'model' objects the code creates, and create and keep a map of these. I may also get it to store other information in the future. I plan to have another two similar classes for this sort of control, but I will orchestrate when and how this happens, and what to do with the returned data via a pure controller class. This splitting up control between informed managers and the controller, as opposed to operating just through a controller seems like it will simplify my code and make it flow more. My question is, is this a dangerous choice, in terms of making the code harder to follow/test/fix? Is this somethign established as good or bad or neutral? I oculdn't find anything similar except the idea of Actors but that's not quite why I'm trying to do. Edit: Perhaps an example is needed; I'm using the Controller to update the view and access the data, so when I click the 'Add new character to a player button' it'll call methods in the controller that then go and tell the PlayerCharacterManager class to create a new character instance, it'll call the PlayerManager class to add that new character to the player-character map, and then it'll add this information to the database, and tell the view to update any GUIs effected. That is the sort of 'control sequence' I'm hoping to create with these manager classes.

  Read the article

• Correcting tree from messed up file tree in NTFS partition

  - by Fullmooninu

  It's a real messed situation, but I'm quite at the end of my options. It's my personal hardrive, so it's very important for me, and yes, I have no backup =( The short story: 1) I have two discs. One with Windows, and another where I had a bit of empty space at the front of the disk, so i could install Linux. The rest was occupied by a 1.8TB NTFS partition filled with data. 2) I installed Linux, and after a while realized there was not enough space for everything, so I tried using Gparted, and told it to re-size the NTFS partition, to a lesser size. 3) The system jammed. I had to reboot and broke the Resizing operation. Here's what I did to fix it: a) Rebooted into Linux Live, and used Testdisk,to deep analyze the disk, and recover the possible partitions. It found several versions of the NTFS partitions, probably made during the resizing. I told Testdisk to open every one of them, and only one could list its files. When trying to open the other options on Testdisk, it showed an error message. I assumed the one without errors, to be the correct one, and I told Testdisk to recover the partition, and write a new MBR. b) The partition had errors, and Linux has a NTFS fixing tool, used it, but the system still had errors. c) So I booted into windows and use chkdsk to correct all errors in the partition. d) Everything seems fine, but now, back in Windows, when I open one file, it opens another file, or part of another file. As in, some files took up the position of other files. What I think happened is that I recovered an old tree, and not the most current one. And that one just happened to be intact, while the most recent one was damaged. As such, the files that were moved during the failed resizing, were now, during the automatic correction, assumed wrongly to be in their correct places. So when I open a file, it tries to open another one. Radiohead - Creep.mp3 will open and it will actually be a bit from another song, or even code from a jpg. Some files seem to be all right, but others have seemed to have had their position taken by others. Anyone knows of something really powerful that can help me solve this?

  Read the article

• Are Intel and Motorola moving towards a MIPS/RISC model? [closed]

  - by Nick Rosencrantz

  Is it true what I read that Intel and Motorola are moving from CISC to a programming model more like RISC/MIPS? Why? From the famous book "Computer Architecture" by Hennessay which usually is recommended around here: Recent implementations of the x86 architecture actually translate x86 instruction into simple operation that look like MIPS instuctions.... Page 335. What does this mean specifically? Can you show me an example?

  Read the article

• Increase Max Pool Size ERROR when using SYBASE ASE ADO.NET data provider

  - by Brani

  I have made a program in VB.net (visual studio 2003) that connects to a SYBASE ASE database using the ADO.NET data provider. Recently, after a hard disk failure, I restored the program's code from a (rather old) backup. But now the connection fails with a message that does not remind me of anything that I have seen before. Here is the code and the error message: Dim cn As New AseConnection("Data Source='my_server';Port='5000';UID='sa';PWD='my_pwd';Database='my_db';") cn.Open() Error message: Sybase.Data.AseClient.AseException - Cannot allocate more connections. Connection pool is at maximum. Increase Max Pool Size Can anybody help me?

  Read the article

• How to remove "VsDebuggerCausalityData" data from SOAP message?

  - by scottmarlowe

  I've got a problem where incoming SOAP messages from one particular client are being marked as invalid and rejected by our XML firewall device. It appears extra payload data is being inserted by Visual Studio; we're thinking the extra data may be causing a problem b/c we're seeing "VsDebuggerCausalityData" in these messages but not in others sent from a different client who is not having a problem. It's a starting point, anyway. The question I have is how can the client remove this extra data and still run from VS? Why is VS putting it in there at all? Thanks.

  Read the article

• How to convert CFDataRef data to UIImage / NSData - Iphone

  - by sagar

  Hello ! every one. I am having a little query regarding CFData in Objective C / iPhone Development. See, Apple documentation has following method for CGPDFStream CGPDFStreamCopyData(<#CGPDFStreamRef stream#>, <#CGPDFDataFormat *format#>) Above method return type is CGDataRef. I have data as stream. Now I wish to convert in image. & For that I think I should follow this way. CGPDFDataFormat t=CGPDFDataFormatJPEG2000; CFDataRef data = CGPDFStreamCopyData (stream, &t); After executing above statements - I have some reference in data variable. Now my Query is - How to convert this CFData to NSData or UIImage ? I have gone through the documentation of apple - But I am failure to find it. Thanks in advance for sharing your knowledge. Sagar

  Read the article

• Expose DB2 data as XML / Query DB2via XML

  - by Anthony Gatlin

  I have a client who has a sort of data warehouse stored in DB2. For a variety of reasons, the data must remain on this platform. The client is considering implementing an open-source CMS (Drupal) which runs in MySQL. The client needs to be able to execute a bunch of pre-defined queries against the DB2 database from the remote application. Drupal appears to interact well with XML data from other systems. It was suggested that we use something like XML-RPC to execute the queries against DB2. I am very familiar with SQL Server and pretty familiar with MySQL, but I have no experience with DB2 and no understanding of its capabilities or limitations. Is there any way that we can use something like XML, XML-RPC, or even http to initiate queries against a DB2 database? Any ideas are appreciated! Thank you!

  Read the article

• Populating Tcl Treeview with Sqlite Data

  - by DFM

  Hello: I am building a Tcl application that reads off of a Sqlite Db. Currently, I can enter data into the database using the Tcl frontend. Now, I am trying to figure out how to display the data within the Sqlite Db from the Tcl frontend. After a little bit of research, I found that the treeview widget would work well for my needs. I now have the following code: set z1 [ttk::treeview .c1.t1 -columns {1 2} -show headings] $z1 heading #1 -text "First Name" $z1 heading #2 -text "Last Name" proc Srch {} {global z1 sqlite3 db test.db pack $z1 db close } When the "Srch" procedure is executed (button event), the treeview (z1) appears with the headings First Name and Last Name. Additionally, the Sqlite Db gets connected, then closes. I wanted to add code that would populate the treeview from the Sqlite Db between connecting to the Db and packing the treeview (z1). Does anyone know the correct syntax to populate a Tcl treeview with data from Sqlite? Thank you everyone in advance, DFM

  Read the article

• Mapping JSON data in JQGrid

  - by hunt

  Hi , I am using jqGrid 3.6.4 and a jquery 1.4.2 . in my sample i am getting following json data format & i want to map these json data into rows of a jqgrid { "page": "1", "total": 1, "records": "6", "rows": [ { "head": { "student_name": "Mr S. Jack ", "year": 2007 }, "sub": [ { "course_description": "Math ", "date": "22-04-2010", "number": 1, "time_of_add": "2:00", "day": "today" } ] } ] } my jqgrid code is as follows jQuery("#"+subgrid_table_id).jqGrid({ url:"http://localhost/stud/beta/web/GetStud.php?sid="+sid, dtatype: "json", colNames: ['Stud Name','Year','Date'.'Number'], colModel: [ {name:'Stud Name',index:'student_name', width:100, jsonmap:"student_name"}, {name:'Year',index:'year', width:100, jsonmap:"year"}, {name:'Date',index:'date', width:100, jsonmap:"date"}, {name:'Number',index:'number', width:100, jsonmap:"number"} ], height:'100%', jsonReader: { repeatitems : false, root:"head" }, }); So now the problem is as my data i.e. student_name and year is under "head" , the jqgrid is enable to locate these two fields. at the same time other two column values i.e. Date and Number lies under "sub" and even those columns i am not be able to map it with jqgrid so kindly help me how to located these attributes in JQGrid. Thanks

  Read the article

• ADO.NET Entity Framework with OLE DB Access Data Source

  - by Tim Long

  Has anyone found a way to make the ADO.NET Entity Framework work with OLE DB or ODBC data sources? Specifically, I need to work with an Access database that for various reasons can't be upsized to SQL. This MSDN page says: The .NET Framework includes ADO.NET providers for direct access to Microsoft SQL Server (including Entity Framework support), and for indirect access to other databases with ODBC and OLE DB drivers (see .NET Framework Data Providers). For direct access to other databases, many third-party providers are available as shown below. The reference to "indirect access to other databases" is tantalising but I confess that I am hopelessly confused by all the different names for data access technology.

  Read the article

• IE8 + Jquery ajax call giving parsererror : for json data which seems valid in Firefox

  - by PlanetUnknown

  The ajax call works fine in FF. the data returned is in JSON here is an example from FF firebug - {"noProfiles": "No profiles have been created, lets start now !"} When I try to print the error in IE8 (& in compatibility modes as well), it says "parsererror". But the output seems to be valid JSON. Here is the ajax function call I'm making. Any pointers would be great ! $.ajax({ type: "GET", url: "/get_all_profile_details/", data: "", dataType: "json", beforeSend: function() {alert("before send called");}, success: function(jsonData) { alert("data received"); }, error: function(xhr, txt, err){ alert("xhr: " + xhr + "\n textStatus: " + txt + "\n errorThrown: " + err); } }); The alerts in the error function above give - xhr:<blank> textstatus:parsererror errorThrown: undefined Any pointers would be great ! Note : jquery : 1.3.2

  Read the article

• Remote Backup User Data on iPhone

  - by Eric

  I wrote a few iPhone apps using Core Data for persistent storage. Everything is working great but I would like to add the ability for users to back up their data to a PC (via WiFi to a PC app) or to a web server. This is new to me and I can't seem to figure out where to begin researching the problem. I don't want to overcomplicate the issue if there is an easy way to implement this. Is anyone familiar enough with what I am looking to do to point me in the right direction or give me a high level overview of what I should be considering? The data is all text and would be perfectly stored in .csv files if that matters.

  Read the article

• DVCS and data loss?

  - by David Wolever

  After almost two years of using DVCS, it seems that one inherent "flaw" is accidental data loss: I have lost code which isn't pushed, and I know other people who have as well. I can see a few reasons for this: off-site data duplication (ie, "commits have to go to a remote host") is not built in, the repository lives in the same directory as the code and the notion of "hack 'till you've got something to release" is prevalent... But that's beside the point. I'm curious to know: have you experienced DVCS-related data loss? Or have you been using DVCS without trouble? And, related, apart from "remember to push often", is there anything which can be done to minimize the risk?

  Read the article

• Merging/filling pdf form file with xml data

  - by Giorgi

  Hello, Let's say I have a pdf form file available at website which is filled by the users and submitted to the server. On the server side (Asp.Net) I would like to merge the data that I receive in xml format with the empty pdf form that was filled and save it. As I have found there are several possible ways of doing it: Using pdf form created by adobe acrobat and filling it with itextsharp. Using pdf form created by adobe acrobat and filling it with FDF Toolkit .net (which seems to be using itextsharp internally) Usd pdfkt to fill the form. Use pdf form file created with adobe livecycle and merge the data by using Form Data Integration Service As I have no experience with this kind of task can you advise which option would be better/easier and give some additional tips? Thank you in advance.

  Read the article

• How to get the data for intra-day candlestick charts for stocks on eg Nasdaq

  - by Chris

  Hi, For a learning exercise, i'm wanting to create candlestick (stock) graphs for stocks using zedgraph. Now on google finance, i can get daily open-high-low-close data which is perfect for making these graphs, but i'm wanting to create intra-day graphs, eg open-high-low-close data for an hour (or 5 mins, or 1 min even). Is there any way to get that kind of data without having to subscribe to any expensive service? I've heard opentick mentioned in an old SO question, but their site is defunct now. I was thinking of polling google finance once a minute to get the latest stock price, then with an hour's worth of 60 prices, i could then roughly calculate the open-high-low-close, but this is a bit of an estimation and i'm open to other suggestions. Cheers all.

  Read the article

• Matlab - plot multiple data sets on a scatter plot

  - by Mark

  Hey all, I have 2 sets of data (Ax, Ay; Bx, By) - I'd like to plot both of these data sets on a scatter plot with different colors, but can't seem to get it to work because it seems scatter() does not work like plot(). Is it possible to do this? I've tried... scatter(Ax, Ay, 'g', Bx, By, 'b') And scatter(Ax, Ay, 'g') scatter(Bx, By, 'b') The first way returns an error. The latter only plots the Bx/By data. Many thanks!

  Read the article

• Java HTML Parsing

  - by Richie_W

  Hello everyone. I'm working on an app which scrapes data from a website and I was wondering how I should go about getting the data. Specifically I need data contained in a number of div tags which use a specific CSS class - Currently (for testing purposes) I'm just checking for "div class = "classname"" in each line of HTML - This works, but I can't help but feel there is a better solution out there. Ie. - Is there any nice way where I could give a class a line of HTML and have some nice methods like: boolean usesClass(String CSSClassname); String getText(); String getLink(); Many many thanks!

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >