Search Results

Search found 17710 results on 709 pages for 'portable home directories'.

Page 293/709 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

  • Why does my dd backup of MacBook OS X fail to boot upon restore?

    - by James
    I created a backup of a MacBook hard drive (WD2500BEVS-88US) by hooking it up as a secondary drive on my linux system (Ubuntu 10.10). I used the following command: sudo dd if=/dev/sdc of=/home/backup.img bs=2M This appears to have completed with no errors. I noticed that the file is only 68 GB in size even though the drive is 250 GB in capacity. I restored the image to a spare drive (WD2500BEVS) with the following command: sudo dd if=/home/backup.img of=/dev/sdb bs=2M When I boot the spare drive in the Mac, it appears to start up for a few seconds and then shuts down. (It does not appear to load into the OS at all). When I open up the drive that won't boot in GParted, it looks like this: When looking at the information for the middle partition with the little red exclamation mark, it shows this: The original hard drive that boots ok shows up like this: Further info on both drives: sudo fdisk -l Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 30402 244198580 ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 30402 244198580 ee GPT So why is my backup or restore failing? Why is dd not creating a byte for byte duplicate?

    Read the article

  • Best way to automatically synchronize files between Linux and Windows

    - by Gregory
    My first choice was rsync but it caused some issues and is too manual. My second choice, currently under evaluation is Unison. Are there any other good options for bi-directional auto-syncing? The synching tool cannot add it's own files to the directories to be synched. Which removes CVS/SVN as a choice. Plus they are too manual. The requirements are user-level program on both sides, no root account access available. Only scanning on linux. On windows it could be a virtual drive/path. Very fast and efficient like rsync. Some other requirements include: machines are not on the same network, files cannot fall into the wrong hands, nor can they be handled by 3rd parties, this pretty much excludes all online storage sites.

    Read the article

  • Wildcard DNS, VirtualHosts on apache2, 404 for unused subdomains

    - by niel
    On an Apache2 server linked to by a DNS that includes a wildcard entry, e.g. *.example.com, subdomains that are not defined as ServerNames in any VirtualHosts point to the first defined VirtualHost, in my example this is 000-default. My Question:How would one get unused subdomains (subdomains not used in any virtualhosts) to return a 404 error to the requesting client? This must preferably show in server logs as a 404 as well. I have looked into the following possibilities: Redirecting any invalid subdomain to the home page or some other page.The problem with this method is, when someone links to your site as this.company.sucks.example.com, the client will see your home page or in my case 000-default if I do not redirect. Thanks, to Mike for pointing this out. (regex for "suck", etc definately not an option) Let the default VirtualHost point to a non-existent directory.Apache does not like this one bit, warning with every reload. Beyond the warning, everything seems fine. This seems like a hack. Does this seem like a problem (however small) to anyone? Point the default VirtualHost to a folder where the index.php is forbidden, thus creating a 403 status code.This is confusing and makes things like the following overly complicated: Say, for example, you use a subdomain per user (a big reason to use wildcard DNS, apparently), and users have the ability to view each others profiles at username.example.com. This solution is confusing to the user and completely not what I want to do. My ideal sollution will let the user know there is nothing to view at the url he entered. Preferably with a 404 and an error log entry for the address entered (not some other address). Any help would be greatly appreciated!

    Read the article

  • Nginx ssl redirection of images

    - by krishna raj
    Hi. I am trying to set up nginx as reverse proxy for a tomcat server using SSL connection. I want the client's browser to load my tomcat application when nginx reverse proxy's IP is called from client's browser. My tomcat application's address is 192.168.25.25 and nginx proxy's address is 192.168.25.50 In my nginx.conf file i have added these lines # location / { proxy_pass https://192.168.25.25:443/myapp/; proxy_redirect https://192.168.25.25/myapp/ https://192.168.25.25/; } # Some of the images in my application is stored at 192.168.25.25/images/ . Now these directories cant be accessed as the proxy_pass is set to 192.168.25.25:443/myapp. Is there way to access images directory also without changing proxy_pass ? Thanks in advance.

    Read the article

  • Windows XP SP3 on Macbook Has Limited Disk Space

    - by Mikey.B
    Hi Guys, I setup Windows XP SP3 on a 40 GB partition using bootcamp (partition formatted for NTFS). For some reason, the hard drive properties only show ~3 GB of space available. Funny thing is though, I've hardly installed anything on the system... and if I open the windows explorer, select all directories, and check properties, it appears that I'm only using 11 GB of space. What gives? I thought there might be hidden files/folders so I enabled the option to show it but still nada. Has anyone come across this before? Any suggestions for how to proceed here?

    Read the article

  • Windows 8 unable to connect to WPA2 AES Wireless Network

    - by user170193
    I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

    Read the article

  • Bind9 DNS help with psuedo domains

    - by Tempname
    I have setup a dns server on my home network to manage some apps that I have written for home. Currently I have 3 "domains" that I am using: controller devserver fileserver The first issue that I am having is that when I attempt to ping the parent domain of any of these 3 I am unable to. I simply get ping: unknown host controller. I however can ping any of the subdomains I have setup for these 3 parent domains. The second issue is I am unable to ping any of the 3 parent domains or any child domains from my window machines. I have verified that these domains work on other devices in my house (ipod touch, ipad, cell phone). Any help with this is greatly appreciated Here is bind data file for my parent domain controller: ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA controller. admin.controller. ( 9 604800 86400 2419200 604800 ) ; @ IN NS controller. @ IN A 192.168.1.104 controller IN A 192.168.1.194 admin.controller. IN A 192.168.1.104

    Read the article

  • Why doesn’t windows explorer show my removable / USB drive even though the command prompt does?

    - by Gishu
    I'm running WinXP SP2. Around 50% of the time, when I slot in my USB drive. Windows explorer refuses to show the drive. If I click on the Safely remove hardware icon on the tray, I can see a menu item for the drive - say drive G: (the light on the USB drive is also on) If I type in G: into the address bar of explorer, it says 'Cannot find...' If I type in G: into a command prompt window, it works and I can do a dir to see the list of directories on the drive. To fix this, I've to remove-reinsert the pen-drive. But doing it every day is annoying. Also this happens only on this machine.. I use this drive on my home machine and it works flawlessly each time. Can anyone suggest things that I could try ? Thanks for reading...

    Read the article

  • How to automatically remove Flash history/privacy trail? Or stop Flash from storing it?

    - by Arjan van Bentem
    Many people have heard about third-party cookies, and some browsers even block those by default. Some people may even be using Private Browsing modes. However, only few seem to realise that Adobe's Flash player also leaves a cross-browser trail on your local hard drive, and allows for sending cookie-like information back to the server, including third-party sites. And because it is a plugin, Flash does not take any of the browser's privacy settings into account. Sorry for the long post, but first some details about why using Flash raises a privacy concern, followed by the results of my tests: The Flash player keeps a cross-browser history of the domain names of the Flash-sites your computer has visited. Unlike your browser's history, this history is not limited to a certain number of days. History is also recorded while using so-called Private Browsing modes. It is stored on your hard drive (though, as described below, without going to Adobe's site you won't know what is stored). I am not sure if any date and time information is kept about each visit, but to see the domain names: right-click on some Flash content, open the settings dialog, and click the Help icon or click the Advanced button within the Privacy tab. This opens a browser to the help pages on Adobe.com, where one can click through to the Website Storage Settings panel. One can clear the existing list, but one cannot stop it from being recorded again. Flash allows for storing data on your local hard drive, using so-called Local Shared Objects (aka "Flash Cookies"). Just like HTTP cookies, this data can be sent back to the server, for tracking purposes. They are cross-browser, have no expiration date, and no user defined maximum lifetime can be set in the Flash preferences either. These not being HTTP cookies, they are (of course) not blocked by a browser's cookies preferences and are not removed when the normal HTTP cookies are deleted. Adobe has announced that version 10.1 will obey Private Browsing in most popular browsers, but unfortunately no word about also removing the data whenever normal cookies are deleted manually. And its implementation might be confusing: [..] if the browser is in normal browsing mode when the Flash Player instance is created, then that particular instance will forever be in normal browsing mode (private browsing is turned off). Accordingly, toggling private browsing on or off without refreshing the page or closing the private browsing window will not impact Flash Player. Local Shared Objects are not limited to the site you visit, and third-party storage is enabled by default. At the Global Storage Settings panel one can deselect the default Allow third-party Flash content to store data on your computer. Because of the cross-browser and expiration-less nature (and the fact that few people know about it), I feel that the cross-browser third-party Flash Cookies are more dangerous for visitor tracking than third-party normal HTTP cookies. They are even used to restore plain HTTP cookies that the user tried to delete: "All advertisers, websites and networks use cookies for targeted advertising, but cookies are under attack. According to current research they are being erased by 40% of users creating serious problems," says Mookie Tenembaum, founder of United Virtualities. "From simple frequency capping to the more sophisticated behavioral targeting, cookies are an essential part of any online ad campaign. PIE ["Persistent Identification Element"] will give publishers and third-party providers a persistent backup to cookies effectively rendering them unassailable", adds Tenembaum. [..] To justify this tracking mechanism, UV's Tenembaum said, "The user is not proficient enough in technology to know if the cookie is good or bad, or how it works." When selecting None (zero KB) for Specify the amount of disk space that website websites that you haven't yet visited can use to store information on your computer, and checking Never ask again then some sites do not work. However, the same site might work when setting it to None but without selecting Never ask again, and then choose Deny whenever prompted. Both options would result in zero KB of data being allowed, but the behaviour differs. The plugin also provides a Flash Player cache for Adobe-signed files. I guess these files are not an issue. So: how to automatically delete that information? On a Mac, one can find a settings.sol file and a folder for each visited Flash-website in: $HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/ Deleting the settings.sol file and all the folders in sys, removes the trail from the settings panels. However, the actual Local Shared Ojects are elsewhere (see Wikipedia for locations on other operating systems), in a randomly named subfolder of: $HOME/Library/Preferences/Macromedia/Flash Player/#SharedObjects But then: how to remove this automatically? Simply removing the folders and the settings.sol file every now and then (like by using launchd or Windows' Task Scheduler) may interfere with active browsers. Or is it safe to assume that, given the cross-browser nature, the plugin would not care if things are removed while it is active? Only clearing during log-off may not work for those who hibernate all the time. Firefox users can install BetterPrivacy or Objection to delete the Local Shared Objects (for all others browsers as well). I don't know if that also deletes the trail of website domain names. Or: how to stop Flash from storing a history trail? Change of plans: I'm currently testing prohibiting Flash to write to its own sys and #SharedObjects folders. So far, Flash has not tried to restore permissions (though, when deleting the folders, Flash will of course recreate them). I've not encountered any problems but this may take some while to validate, using multiple browsers and sites. I've not yet found a log that reports errors. On a Mac: cd "$HOME/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer" rm -r sys/* chmod u-w sys cd "$HOME/Library/Preferences/Macromedia/Flash Player" # preserve the randomly named subfolders (only preserving the latest would suffice; see below) rm -r \#SharedObjects/*/* chmod -R u-w \#SharedObjects I guess the above chmods cannot be achieved on an old Windows system (I'm not sure about XP and Vista?). Though maybe on Windows one could replace the folders sys and #SharedObjects with dummy files with the same names? Anyone? Obviously, keeping Flash from storing those Local Shared Objects for all sites may cause problems. Some test results (Flash 10 on Mac OS X): When blocking the sys folder (even when leaving the #SharedObjects folder writable) then YouTube won't remember your volume settings while viewing multiple videos. Temporarily allowing write access to the blocked folders while visiting trusted sites (to only create folders for domains you like, maybe including references in settings.sol) solves that. This way, for YouTube, Flash could be allowed to write to sys/#s.ytimg.com and #SharedObjects/s.ytimg.com, while Flash could not create new folders for other domains. One may also need to make settings.sol read-only afterwards, or delete it again. When blocking both the sys and #SharedObjects folders, YouTube and Vimeo work fine (though they might not remember any settings). However, Bits on the Run refuses to even show the video player. This is solved by temporarily unblocking the #SharedObjects folder, to allow Flash to create a subfolder with some random name. Within this folder, it would create yet another folder for the current Flash website (content.bitsontherun.com). Removing that website-specific folder, and blocking both #SharedObjects and the randomly named subfolder, still seems to allow Bits on the Run to operate, even though it still cannot write anything to disk. So: the existence of the randomly named subfolder (even when write protected) is important for some sites. When I first found the #SharedObjects folder, it held many subfolders with random names, some created on the very same day. I wonder when Flash decides it wants a new folder, and how it determines (and remembers) that random name. For a moment I considered not blocking write access for sys and #SharedObjects, but explicitly creating read-only folders for well-known third-party tracking domains (like based on a list from, for example, AdBlock Plus). That way, any other domain could still create Local Shared Objects. But the list would be long, and the domains from AdBlock Plus are probably all third-party domains anyway, so disabling Allow third-party Flash content to store data on your computer might have the very same result. Any experience anyone? (Final notes: if the above links to the settings panels do not work in the future, then use the URL that is known to Flash player as a starting point: www.adobe.com/go/settingsmanager. See also "You Deleted Your Cookies? Think Again" at Wired.com -- which uses Flash cookies itself as well... For the very suspicious using Time Machine: you may want to exclude both folders, for each user, and remove the trace that is already on your backup.)

    Read the article

  • Windows 7 AIK help

    - by microchasm
    I've just got in a few Windows 7 (64, Windows 7 Professional) machines, and I'm trying to get the AIK 2010 working. I've set up one of the machines, and installed AIK and MDT on it. I've followed the directions at http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx about 3 times now, and also tried the built-in .chm help files that came with AIK. In AIK I grab the install.wim image off the OEM cd, at which point it asks me which version (I select Professional). I follow the rest of the instructions creating a new Autounattend answer file, and fill in the various bits and pieces according the the step-by-step guides. I verify the Answer file (No warnings or errors), save it, and copy it onto a USB drive. I go to another machine, insert it's OEM Win7 Disk, and power on. I've set BIOS to boot from CD, so it goes directly into the installation. Once The files are loaded, and Setup starts, it immediately asks which version to install (Home basic, Home Premium, Professiona, Ultimate). Ugh, I thought it was supposed to be an automated install, and that selecting the Version when opening the .wim file would answer this question. I looked for an option to set which version to be installed on the net, in the help, and in AIK itself; to no avail. Anyway, just for laughs I select Professional,and hit continue. It copies files for about 10 seconds, then fails with the following error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information. [OK]". Clicking OK reboots the box, and obviously there are no log files because the OS isn't installed. It is a Dell Optiplex 380 , Intel Core Duo 2.93 GHzl 4 GB RAM, 64 Bit. Any help would be REALLY appreciated.

    Read the article

  • Question regarding the SELinux type enforcement file

    - by Luke Bibby
    In my SElinux te file, I define two new types called voice_t and data_t which certain directories will be classified in the fc file (/data/ will be of type data_t and /voice/ will be of type voice_t). I would like the one SELinux policy to be used for all servers in my network, but, some servers will log VoIP data and other servers will be used to log IP data. I only want the voice_t type to be defined on some servers and data_t to be defined on the others - is this possible? I have tried using an if statement with a boolean expression, and then defining the type when the condition is true but this does not seem to work (it tells me there is a syntax error at 'type data_t'' or 'type voice_t;'). Example: if (data_logger) { type data_t; } else { type voice_t; } Any help would be greatly appreciated. Cheers, Luke

    Read the article

  • MaxStartups and MaxSessions configurations parameter for ssh connections?

    - by Webby
    I am copying the files from machineB and machineC into machineA as I am running my below shell script on machineA. If the files is not there in machineB then it should be there in machineC for sure so I will try copying the files from machineB first, if it is not there in machineB then I will try copying the same files from machineC. I am copying the files in parallel using GNU Parallel library and it is working fine. Currently I am copying 10 files in parallel. Below is my shell script which I have - #!/bin/bash export PRIMARY=/test01/primary export SECONDARY=/test02/secondary readonly FILERS_LOCATION=(machineB machineC) export FILERS_LOCATION_1=${FILERS_LOCATION[0]} export FILERS_LOCATION_2=${FILERS_LOCATION[1]} PRIMARY_PARTITION=(550 274 2 546 278) # this will have more file numbers SECONDARY_PARTITION=(1643 1103 1372 1096 1369 1568) # this will have more file numbers export dir3=/testing/snapshot/20140103 find "$PRIMARY" -mindepth 1 -delete find "$SECONDARY" -mindepth 1 -delete do_Copy() { el=$1 PRIMSEC=$2 scp david@$FILERS_LOCATION_1:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. || scp david@$FILERS_LOCATION_2:$dir3/new_weekly_2014_"$el"_200003_5.data $PRIMSEC/. } export -f do_Copy parallel --retries 10 -j 10 do_Copy {} $PRIMARY ::: "${PRIMARY_PARTITION[@]}" & parallel --retries 10 -j 10 do_Copy {} $SECONDARY ::: "${SECONDARY_PARTITION[@]}" & wait echo "All files copied." Problem Statement:- With the above script at some point I am getting this exception - ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host ssh_exchange_identification: Connection closed by remote host And I guess the error is typically caused by too many ssh/scp starting at the same time. That leads me to believe /etc/ssh/sshd_config:MaxStartups and MaxSessions is set too low. But my question is on which server it is pretty low? machineB and machineC or machineA? And on what machines I need to increase the number? On machineA this is what I can find - root@machineA:/home/david# grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10:30:60 root@machineA:/home/david# grep MaxSessions /etc/ssh/sshd_config And on machineB and machineC this is what I can find - [root@machineB ~]$ grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10 [root@machineB ~]$ grep MaxSessions /etc/ssh/sshd_config #MaxSessions 10

    Read the article

  • Cannot create file in directory even though it's writable by a group I belong to

    - by Alan Berndt
    I have a directory structure owned by a certain group, and I am a member of the group that owns these directories. I am able to create files in one directory, but not in another, even though the permissions are the same. alan@bricky:/mnt/storage/media$ stat Music Music\ \(Lossy\)/ File: `Music' Size: 34 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 4215424 Links: 3 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.182586898 -0700 Modify: 2011-08-19 11:44:01.412840027 -0700 Change: 2011-08-19 11:45:02.734603240 -0700 File: `Music (Lossy)/' Size: 6 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 1512056832 Links: 2 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.190586606 -0700 Modify: 2011-08-19 10:34:46.526530313 -0700 Change: 2011-08-19 11:45:02.738603094 -0700 alan@bricky:/mnt/storage/media$ touch Music/test alan@bricky:/mnt/storage/media$ touch Music\ \(Lossy\)/test touch: cannot touch `Music (Lossy)/test': Permission denied

    Read the article

  • Apache Reverse Proxy not working inside a VirtualHost running a Mono Web Application

    - by Arwen
    I have a mono web application running with this virtual host below. It is running on Apache 2.2.20 / Ubuntu 11.10. I tried to add a reverse proxy inside this virtualhost so I can make asynchronous or AJAX type calls back to this same domain. My asynchronous requests would have problems in many browsers calling services that are on another domain (cross domain requests problem). I am wanting to do reverse proxy calls to this other service using http://www.whatever.com/monkey/. So, I added the directive and top directive to try to make this work. It is weird though...nothing I do seems to have any effect. I can put the exact same markup in my default website virtualhost file and it works great. What is the deal? Are some of these Mono directives causing problems? <VirtualHost *:80> ServerName www.whatever.com ServerAlias whatever.com *.whatever.com ServerAdmin [email protected] DocumentRoot /home/myuser/web/whatever ProxyRequests off <Proxy *> Order allow,deny Allow from all </Proxy> <Location /monkey/> ProxyPass http://www.google.com/ ProxyPassReverse http://www.google.com/ </Location> MonoServerPath www.whatever.com "/usr/bin/mod-mono-server2" MonoSetEnv www.whatever.com MONO_IOMAP=all MonoApplications www.whatever.com "/:/home/myuser/web/whatever" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias www.whatever.com SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost>

    Read the article

  • Getting AWStats to work in Ubuntu 12.04

    - by koogee
    I'm new to apache and i'm trying to set up AWStats on my ubuntu 12.04 server. I've followed the guide at Ubuntu docs https://help.ubuntu.com/community/AWStats I set it up according to the instructions and awstats is able to generate initial stats from apache log successfully. I placed the links to awstats in the default virtual host file. However when I try to run http://server-ip-address:8080/awstats/awstats.pl, I get: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats. Setup ('/etc/awstats/awstats.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). Here is my /etc/apache2/sites-available/default file: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /home/saad/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/saad/www/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /awstatsclasses "/usr/share/awstats/lib/" Alias /awstats-icon "/usr/share/awstats/icon/" Alias /awstatscss "/usr/share/doc/awstats/examples/css" ScriptAlias /awstats/ /usr/lib/cgi-bin/ Options ExecCGI -MultiViews +SymLinksIfOwnerMatch ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> The only three variables I edited in /etc/awstats/awstats.conf are: LogFile="/var/log/apache2/access.log" SiteDomain="server-name.noip.org" HostAliases="localhost 127.0.0.1 server-name.no-ip.org" The apache server works fine and i'm able to access other pages stored on the server. Any guidance would be welcome.

    Read the article

  • Kubuntu 9.10: LUKS-encrypt entire partition

    - by Adam Matan
    Hi, In older versions of Ubuntu, mainly 8.04, I could encrypt en entire partition using LUKS, and mount it as /. the /boot directory was mounted on another partition. At boot time, I had to enter my password to enable any access to anything other than /boot. In Kubuntu 9.10, I only have the option to encrypt my /home/adam directory, which is a bit of a problem for me because I have sensitive data located in other directories. Any ideas how to set up LUKS for the entire disk, preferably during installation? Thanks in advance, Adam

    Read the article

  • How to remove strict RSA key checking in SSH and what's the problem here?

    - by setatakahashi
    I have a Linux server that whenever I connect it shows me the message that changed the SSH host key: $ ssh root@host1 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY! Someone could be eavesdropping on you right now (man-in-the-middle attack)! It is also possible that the RSA host key has just been changed. The fingerprint for the RSA key sent by the remote host is 93:a2:1b:1c:5f:3e:68:47:bf:79:56:52:f0:ec:03:6b. Please contact your system administrator. Add correct host key in /home/emerson/.ssh/known_hosts to get rid of this message. Offending key in /home/emerson/.ssh/known_hosts:377 RSA host key for host1 has changed and you have requested strict checking. Host key verification failed. It keeps me for a very few seconds logged in and then it closes the connection. host1:~/.ssh # Read from remote host host1: Connection reset by peer Connection to host1 closed. Does anyone know what's happening and what I could do to solve this problem?

    Read the article

  • Making the iPhone work with stripped down Windows XP

    - by Gabriel
    Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

    Read the article

  • Which tools should I use to work efficiently on a remote server?

    - by Konstantin
    I rented a virtual ubuntu server and am trying to setup a web application. I am working from ubuntu. I know how to use the command line, but it is slow and as a visual person, I prefer graphical interfaces. So I connected with nautilus via ssh and was now able to browse the directories graphically. But my permissions are just those of "other", so I cannot do much without o+rwx. What tools do you use to do setup and administrate your servers? Should I write code locally rather then directly on the server and rsync it? EDIT: It is NOT a production server, I am simply fiddling around there.

    Read the article

  • How to perform SCP as a Sudo user

    - by Ramesh.T
    What is the best way of doing SCP from one box to the other as a sudo user. There are two servers Server A 10.152.2.10 /home/oracle/export/files.txt User : deploy Server B 10.152.2.11 /home/oracle/import/ User : deploy Sudo user : /usr/local/bin/tester all i want is to copy files from server A to Server B as a sudo user... In order to do this, first i normally login as deploy user on the target server and then switch as a sudo user without password. after that SCP to copy file, this is the normal way i perform this activity... In order to auotmate i have written script #!/bin/sh ssh deploy@lnx120 sudo /usr/local/bin/tester "./tester/deploy.sh" I have generated the private key for deploy user, so it allows me to login as deploy user without password. afterthar the sudo command is executed it will switch the user to tester... after that nothing happens.. i mean the script is not getting executed ... is there any way to accomplish this in a different way...

    Read the article

  • How do I change OSX package install directory?

    - by Scott
    It drives me nuts that every time I download a binary to run on OSX that it wants to install in system directories. ~/Applications is a perfectly fine place to install and doesn't require blindly authenticating somebody else's binary. Is there a way to change the install directory for packages? On a few I've been able to open the package and edit the plist to install it elsewhere, but that doesn't work universally. I install from source when I can, but it isn't always an option. Is there a good way to force the installer to use ~/Applications?

    Read the article

  • How to create a very simple external FastCGI configuration in apache?

    - by Thiado de Arruda
    I have an externally started FastCGI application that listens on socket '/tmp/foo.sock' and a directory of static files in '/srv/static'. Apache has all needed permissions on the socket and the directories. What I need : All requests starting with '/static' should be handled by apache using the contents of '/srv/static'. All other requests should be handled by the FastCGI application. Here is my current virtual host configuration: <VirtualHost *:80> ServerAdmin [email protected] ServerName www.foo.com ServerAlias foo.com Alias /static /srv/static FastCgiExternalServer /* -socket /tmp/foo.sock ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost> Even though this seems simple, its giving me quite the headache. According to http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html#FastCgiExternalServer the first parameter to 'FastCgiExternalServer' should be a 'filename' that when matched will cause apache to delegate the request to the external FastCGI app. What am I missing here?

    Read the article

  • Windows Server 2003 R2 SP2 GPO Conditional Terminal Services Client Redirection

    - by caleban
    We have a lot of mobile/home users with different client side printers attached. Most of these users don't need to print on the client side and we don't want all of these users Terminal Services sessions trying to map their client side printers and we don't want all of these drivers on the Terminal Server. What is the best way to set up around 90 users to have no client side printer redirection and 10 users to have client side printer redirection (to the printers attached to their home computers)? Do I need to create two separate OU's in AD one for redirection and one for no redirection and create two different policies one for each OU? One GPO with Client Server data redirection Do not allow client printer redirection disabled and one enabled? Is it preferrable instead to change each user's AD User Properties Enviroment Client devices Connect client printers at logon setting? Is there any for me to direct "ALL HP Printers" to a single HP Universal Printer Driver, "ALL Canon Printers" to a single Canon Universal Printer Driver, etc without specifying hundreds of unique printer names in the printsub.inf file? Thanks in advance.

    Read the article

  • When using procmail with maildir, it returns error with code I found

    - by bradlis7
    I'm not an expert at procmail, but I have this code: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user, sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Thanks for the help.

    Read the article

  • Where is Amazon Linux AMI Test Page EC2?

    - by fuzzybee
    I have set up my websites as directories directly under /var/www/html/ and they are working just fine (the websites are mapped to virtual hosts). So, this is mainly out of curiosity for the moment. Furthermore, being able to customise this might bring some benefits in the future e.g. branding the elastic IPs my computer use temporarily. Notes I can always create a index.html page under /var/www/html/ and modify it but that's not my goal here. I can also map the elastic IP address to a directory /var/www/html/default/ and do my stuffs there but that is not also my goal here My goal is the find the Amazon Linux AMI test page I've tried running Linux command to find it but it takes too long obviously

    Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >