Search Results

Search found 10107 results on 405 pages for 'remote backups'.

Page 293/405 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• DD-WRT with both https and sshd running in port 443

  - by Bruno

  I have a buffalo router with dd-wrt v24 SP2. After setting up the basic stuff, I enabled the https access to the admin page. Several days later, while setting up remote ssh, I changed the default port from 22 to 443. And now..well :) You got the picture :) I can ssh the router but I have no web access to it's admin page. Before rushing to a cold-hearted configuration reset, is there any way to change the ssh port from a shell? Or make dd-wrt accessible thru basic http?

  Read the article

• How to route traffic from VM (Parallels) over an Open VPN connection on the host (OS X)

  - by withakay

  Scenario: I have a Mac running Lion that is connected to an OpenVPN server I have a Windows XP VM (running on parallels, but I don't think this is important) I want to be able to route traffic from the XP VM via the host Mac's OpenVPN connection so that I can log on to a domain. The remote network is 172.16.0.0/23 (255.255.254.0) Open VPN is configured to supply address in the 10.100.101.0/24 range and sets up the routing to 172.16.0.0 using the gateway 10.100.101.1/32 My local network is 192.16.1.0/24 NOTE: I do not want to install OpenVPN into the XP virtual machine as I would have to use a passwordless key in order for OpenVPN to connect before logon. Anyone got any ideas?

  Read the article

• Error when I try to connect to a SQL Server 2005 from the internet

  - by Manish

  My SQL Server is on a local machine. I want to access it through internet. I created a website through I want to connect local SQL Server 2005. This is the error message: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Thanks for a reply!

  Read the article

• Direct Access on Server 2012

  - by francisswest

  Scenario: Windows Server 2012 with the Remote Access role installed. IP set to static, registered DNS. 3 domain controllers, all running Server 2003 (I suspect this may be the issue) Done so far: DNS registered, firewall turned off after IPsec was applied. Able to ping all 3 DC's with no issues Problem: Going through the DA wizard generates this error. I am logged in as a domain admin, verified that I can ping the DC, verified IPsec allows me to contact it. Since this version hasnt been readily deployed yet, there isnt much help available online from what I can find. Any assistance ayone could provide would be greatly appreciated. I am still new to the server world as far as things are considered. I would fit, user wise, between Superuser.com and serverfault.com (junior admin) Thanks to anyone who may be able to assist!

  Read the article

• Limit WSUS replication to only certain product classifications

  - by MDMarra

  I have four WSUS 3.0 SP2 servers that are geographically distributed. The server at our main site (we'll call it WSUS1), is the main WSUS server. All manual and auto-approvals happen here. The other three WSUS servers are replicas of this server. Currently, we are only controlling desktop OS updates through WSUS. I would like to control server OS updates through WSUS as well. There is no need for all of these server updates to be on WSUS servers at the remote sites. The only server that would need a copy of them is WSUS1. Is there a way to keep my current infrastructure as-is and add server OS updates only to WSUS1, even though the others are set up as replicas, or will I need to configure an additional WSUS server that's not replicated?

  Read the article

• Selenium RC htmlsuite error with IE

  - by Alina

  I am trying to use Selenium RC but i keep getting this error whenever i start the server. "HTML suite exception seen: java.lang.RuntimeException: sessionId 7643 doesn't exist; perhaps this session w as already stopped?" The command I use is java -jar C:\selenium-remote-control-1.0.3\selenium-server-1.0.3\selenium-server.jar -multiwindow -htmlSuite "*iexplore" "https://user1.apps.com/" "C:\TEMP\Selenium Tests\TestSuite1.html" "C:\TEMP\Selenium Tests\results.html" However with the same command if I change *iexplore to *firefox then it works. I need to run the test with IE, please help!Many thanks!!

  Read the article

• Monitor status while using VNC

  - by kumar

  So after connecting to a vnc server via vnc viewer to my desktop (remotely), Is it possible to know whether the monitor connected to the CPU is switched ON or not. Simply put, from command prompt how do you know whether monitor is ON/OFF from command line. Here, Basically I am bit worried about privacy as my monitor can be viewed by anyone while accessed remotely. Any solution? Obviously there is a option to switch off the monitor while starting the vnc server at remote side but I am looking for a better solution to control monitor(possible??) remotely. Thanks!

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• Dreamweaver not connecting RDC

  - by thomas

  I am trying to use Dreamweaver to Remote Desktop Connect into a computer where a website is hosted. Normal traffic to this server is routed to another domain, but when accessed by IP (it is my understanding) the traffic never hits any sort of nameserver request, and so stays there. This server is set up so that the only way I can access it is RDC. I can connect using an RDC program, but when I attempt to use Dreamweaver, I get a vague error. The desired action could not be completed because an unexpected client/server communication error occurred. I have Web URL as http://my.ip.number/directory And in the settings panel, I have Host name: my.ip.number Port: 3388 Host directory: C:\Program Files (x86)\directory/directory Username: user Password: ••••••• What could be preventing Dreamweaver form connecting? Thanks! SERVER DETAILS It is a virtual server Windows SERVER 2008 R2 Standard Service Pack 1

  Read the article

• Server Running but unable to log in to it

  - by Funky Si

  I have a Windows Server 2003 server that is running sql server. Users can access the databases running on it fine, but I am unable to log on to it by remote desktop or directly at the machine. I am able to view the event logs remotely and I can't see anything that shouts out as being a problem. What options can people think of for regaining access to this server or finding out more information about the problem? I am able to reinstall the operating system but would like to leave that as a last resort.

  Read the article

• Protecting a SVN server

  - by user35072

  For various reasons we are finding it increasingly difficult to work with remote workers. We are a very small developer shop and it's becoming impractical to do manual merges on a daily basis. So we're left with little choice (?) but to consider opening up our SVN servers. I'm looking into the following: Full HTTPS session Running non-80 port Strong password policy Is this enough to prevent someone hacking and stealing data? I will also look into VPN but first would like to understand any alternative solutions.

  Read the article

• ftp users configuration in OpenSuse 12

  - by chieroz

  I usually work with MacOSX servers but this time I need to set up a ftp service on a OpenSuse 12.2 server and I am a little lost. I am using the remote YAST2 tool via ssh. I created several users who can connect via ssh and/or ftp, so the basic setup is ok. But when connecting via ftp all my users don't have write permissions. The FTP directory for authenticated users is /srv/www/htdocs, which has permissions root:root. The OpenSuse manual say it's bad practice to change these permissions, but my normal users (even the ones in the sudoers list) cannot upload files. So I am stuck: as a workaround I use rsync, but from time to time I just need to establish a working ftp connection. What's the right approach for users permissions in this scenario? Thanks a lot.

  Read the article

• Catch headset pause/play keypresses in Windows

  - by akshay2000

  I have a new Ultrabook which has single audio jack for input and output instead for separate 3.5 mm jacks we used to have on older machines. The jack is probably similar to American Audio Jack specification or like the one found on Macbook Pro. I have tried to use it with the Apple, HTC, Nokia earphones which ship with most of the smartphones. Microphone on the headset works the way it should. Thing is that the headsets also come with remote controls to control volume and playback. I am sure that those key presses are sent to the Windows. I was hoping to catch those events and bind those to actual media keys so that I can control music playback. I guess this happens on Macs. I want to do the similar thing on the Windows. I'm just not sure where I can catch the events. Driver level? Application level?

  Read the article

• How to choose an open source, Asterisk friendly firewall?

  - by Lucas

  I'm in pain. We are moving to a SIP based VOIP system and for whatever reason, we could not get our hosted Asterisk solution to work with our Sonicwall. Our VOIP provider gave up and is recommending an open source vendor, pfSense. A little background: We have about 30 users in our network. We use a few IPSec VPN connections for remote networks. I would like, but don't need, application layer filtering. We're active internet users, so properly traffic shaping is probably a concern. How can I tell if an open source firewall will handle VOIP setup smoothly with a hosted Asterisk system?

  Read the article

• Simple server status page hosted externally available for users

  - by Chris

  I am looking for any kind of script - can be asp or php or any other web language - that gives me the ability to log outages and the current state of the network for our organisation. This would be similar to any major Telco's "Network Status" page, but I just want to tell the user's out there if the systems are up and running and have a history of recent outages. This would be for our remote user's so they could go to a webpage (externally hosted from our main site) and see that we are currently having problems with our network. What are other people out there using?

  Read the article

• What is needed for 'Previous Versions' to be visible on the client OS?

  - by Zoredache

  I have servers with Shadow Copies enabled taking snapshots a couple times a day. From the server, if you look at the local devices you can see the Previous Versions being populated reliably. But from remote clients, the ability for an end-user to see the Previous Versions seems to be very hit-or-miss. For the sake of this question you can assume that all my clients are Windows 7 and the Servers are Windows Server 2008 R2. Is there an exhaustive list of everything that is required for end user to see Previous Versions? Are their any requirements for a certain level of share or filesystem permissions, other then read access? Does something need to be open on the firewall, other then what is already in-place for normal Windows networking?

  Read the article

• Input traffic shaping

  - by whitequark

  I know that I can shape output traffic with tc or a similar tool. However, I want to shape the input traffic now—actually, I want to prioritize downloading of files of certain type through a slow lossy connection. I know the reason tc can only shape output traffic: the host itself has no direct control over the amount of input traffic. On the other hand, TCP has some measures built in it which prevent the TCP traffic from overflowing a slow connection. So, can I mangle something in TCP header so that the remote host will think my connection is slower than it thinks? Suppose that I am able to set the corresponding mark on both types of connections with iptables. Is there any way to reduce the input bandwidth of connections of first type, but only if connections of second type are present?

  Read the article

• wamp server REDIRECT_STATUS

  - by user143039

  I have noticed my remote server returns $_SERVER[REDIRECT_STATUS] with every request. Example: [REDIRECT_STATUS] = 200 But my localhost wamp server does not. Interestingly, when I manually set a header: Example: header('HTTP/1.1 302 Redirect This'); The variable: $_SERVER[REDIRECT_STATUS] is still not set. Though I can view the headers, including the one I set, with HttpFox. $_SERVER[REDIRECT_STATUS] is set when .htaccess throws(?) an ErrorDocument, like ErrorDocument 404 for example. Any ideas how to get wamp server to set the variable $_SERVER[REDIRECT_STATUS] with every request?

  Read the article

• Backup XAMPP (Htdocs & MySQL)

  - by Max

  I have a development server, but would like to backup everything at least daily to a remote location. I would like to backup the htdocs folder and the MySQL servers. But if possible also the settings of the server and anything else relevant. At the moment I am using DropBox for the htdocs, but this is not ideal. I have looked into Git, DropBox simple copy paste on a daily basis. I was wondering what any advice would be. For example how hard would it be to set it up as a cloud based system? Any and all advice is greatly appreciated.

  Read the article

• 2 workstations won't connect to most websites, but will connect to some

  - by Dean

  I have a very frustrating issue I wasn't able to solve: 2 workstations which are used by the same user are not able to connect to most websites receivin a timeout, however they will load some websites specificly from my country. They are able to get the website addresses via DNS. Both stations have their internet connection through a remote router. Other stations in the same LAN are connecting fine. Here's what I tried: Virus scan Renewing IPs Reseting the workstations Moving one workstation to a different RJ-45 in the wall Reseting the hub and switch Checking the hosts file DNS flush Nothing seems to help. I am preparing a CD with more AV tools to see if there's anything hiding on the stations. UPDATE: It was an incorrect configuration in "Internet Options". I configured the correct proxy and now it works.

  Read the article

• APF, IPTABLES, Fedora 15 - Not blocking correctly

  - by RichardW11

  I just got a new remote server which came with Fedora 15. I first tried to run APF but it gave me this error "apf(18031): {glob} unable to load iptables module (ip_tables), aborting.". Which I then set SET_MONOKERN="0" to SET_MONOKERN="1" to resolve the problem. However, with my config file showing BLK_P2P_PORTS="1214,2323,4660_4678,6257,6699,6346,6347,6881_6889,6346,7778" The ports show up as closed, instead of being filtered. Any idea why this would be happening? 22/tcp open ssh 80/tcp open http 443/tcp open https 2323/tcp closed 3d-nfsd 4662/tcp closed edonkey 6346/tcp closed gnutella 6699/tcp closed napster 6881/tcp closed bittorrent-tracker 7778/tcp closed interwise

  Read the article

• Tool to launch a script driven by modem activity

  - by Will M

  Can anyone suggest a software tool (preferably under Windows XP or later) that would launch an application or script in response to a phone call being received on a landline phone line connected to a data modem on the same PC? or, better, in response to a sequence of touch-tones being played over such a phone line. This would allow, for example, using the telephone to manipulate firewall settings so as to create another layer of security in connection with remote internet access to that computer. I seem to recall seeing tools to do this sort of thing in the days before broadband internet access, when there was more attention to various tips and tricks for the dial-up modem, but a few attempts at Google hasn't turned anything up.

  Read the article

• Color highlights have vanished in emacs

  - by Jim Kiley

  I'm using emacs on a remote Linux server that I access via ssh. I'm editing C files that have a non-standard suffix, so I have had to manually enter c-mode with M-x c-mode every time I open one of those files. I found this to be annoying so I started monkeying with my .emacs to make that problem go away. This made all the color highlights in c-mode go away instead. Correction: All my color highlights are gone. I've removed the .emacs file, logged out and logged back in, but now, the color highlights are gone. I miss them! They were very helpful How do I get them back?

  Read the article

• ftp connects but files aren't visible browsing

  - by YsoL8

  Hello If this should be on that other site, please don't shoot me, as I can't remember the name or the url. I have an ftp account in Dreamweaver that connects to the remote site and appears to be uploading files as normal. But when I browse to the location I can't see any new files or changes to the index page. (I've uploaded index.php and connect.php). I'm getting a 404 page. I suspect the host directory is wrong, but looking at the file tree, I can't see the folder I'm supposed to be using, so I'm uploading to the apparent site root. Any guidance on this?

  Read the article

• Application runs with different speed for two different user logins on windows server

  - by karthi

  We have a application in Windows Server that download data from SQL server and store in our local machine. Now the problem I have is my Windows Server has two logins and in one login the app runs real slow, like gets 1 row in a minute, and from another login it fetches 20 rows in a minute. We have this problem only for a last couple of days. What could have caused this? More details: SQL server:S QL server2008 Os: Windows server 2008 Access method: Remote connection. Application: Custom .Net application to get data Both accounts are limited rights accounts. Any tools to track this? I am not sure what should I start with.

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >