Search Results

Search found 11364 results on 455 pages for 'port blocking'.

Page 295/455 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

• Is there a Linux-compatible R/C simulator that works with real radios?

  - by Norman Ramsey

  My Dad flies radio-controlled (R/C) aircraft. He used to run a simulator called "RealFlight" which allowed him to connect his actual radio to his computer and fly simulated craft. He learned enough to fly actual planes, but he wants to move up from "trainer" aircraft to higher-performance craft. After some crashes, he'd like to go back to the simulator for a while. The catch: he's given up Windows and is now running Ubuntu. Question: is there an R/C flight simulator that Runs on Ubuntu? Allows you to connect your radio and use it to control the simulator, preferably through a USB port?

  Read the article

• Connect devices plugged into Raspberry Pi ethernet to WiFi network

  - by Tom

  I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

  Read the article

• VirtualBox in production?

  - by MrG

  I'm planning to move a service which is currently powered by Debian into a VirtualBox. That would allow us to easily port it i.e. to a faster machine if required. The setup would be: debian host > Virtual Box #1 > debian instance #1 running Apache & application > Virtual Box #2 > debian instance #2 containing database Do you have any experience with a production setup based on Virtual Box? Is it stable and fast enough? Many thanks!

  Read the article

• How to use IIS as a trusted proxy for ActiveDirectory SSO?

  - by brofield

  I'm trying to add Active Directory single-sign-on support to an existing SOAP server. The server can be configured to accept a trusted reverse-proxy and use the X-Remote-User HTTP header for the authenticated user. I want to configure IIS to be the trusted proxy for this service, so that it handles all of the Active Directory authentication for the SOAP server. Basically IIS would have to accept HTTP connections on port X and URL Y, do all the authentication, and then proxy the connection to a different server (most likely the same X and Y). Unfortunately, I have no knowledge of IIS or AD (so I am trying my best to learn enough to build this solution) so please be gentle. I would assume that this is not an uncommon scenario, so is there some easy way to do this? Is this sort of functionality built into IIS or do I need to build some sort of IIS proxy program myself? Is there a better option for getting the authentication done and the X-Remote-User HTTP header set than requiring IIS?

  Read the article

• How can I secure Postgres for remote access when not in a private network?

  - by orokusaki

  I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

  Read the article

• IIS 7 + ASP.NET 4

  - by user26712

  Hello, I have an ASP.NET application that I am trying to convert to an ASP.NET 4 application. The application is fairly simple. I have created a new web application in IIS 7.5 pointing to the directory that the ASP.NET application exists in. When I attempt to execute the application, but entering http://localhost%3A%5Bport%5D into my browser, I receive the following error: Error Summary HTTP Error 500.21 - Internal Server Error Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list Most likely causes: * Managed handler is used; however, ASP.NET is not installed or is not installed completely. * There is a typographical error in the configuration for the handler module list.

  Read the article

• How to use Client for NFS on Windows Vista?

  - by netvope

  I've installed "Client for NFS" on my 32-bit Windows Vista Ultimate. However, I can't find it in the start menu, and can't find any documentation on how to use it. How do I connect to a NFS share using "Client for NFS"? Can I map it to a drive letter? How do I choose connection options, such as my uid/gid, mount as read-only, port number, etc? Ideally I would like to map a NFS share using the command line. You may also suggest alternatives to "Client for NFS".

  Read the article

• Strange failure audit in 2003 R2 X64 SP2

  - by Az

  our server is running 2003 R2 X64 SP2, we keep seeing this in clusters of around 4 rapid fire. Sometimes 2 hours, sometimes around 8 hours apart with slight variations. I am also seeing the same blank username and domain in an account locked out message, I have tried disabling all scheduled tasks, if anyone has any idea please let me know! I find these processes running out of svc host: AeLookupSvc, AppMgmt, BITS, Browser, CryptSvc, dmserver, EventSystem, helpsvc, IAS, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, winmgmt, wuauserv, WZCSVC Logon Failure: Reason: Account currently disabled User Name: Domain: Logon Type: 3 Logon Process: Authz Authentication Package: Kerberos Workstation Name: PPCLUBES_TS Caller User Name: PPCLUBES_TS$ Caller Domain: PPCLUBES Caller Logon ID: (0x0,0x3E7) Caller Process ID: 928 Transited Services: - Source Network Address: - Source Port: -

  Read the article

• Sonicwall - dual WAN ports - switch from one to another

  - by Charles

  Hi, Folks! I'm using a SonicWall NSA 240 which has two WAN ports (T1 and Comcast) and the LAN port has a cable which connects to a switch. From the switch, several cables connect to other switches. The SonicWall doesn't have DHCP enabled; one of our domain controllers running Windows Server 2003 also functions as a DHCP server. Is there a way for a user in our network to change connection from T1 to Comcast as their ISP or vice versa? In other words, if a user is connected via the T1, can he/she somehow connect via Comcast instead? Thanks, in advance, for your help! Sincerely, Charles

  Read the article

• Reverse lookup SERVFAIL

  - by Quan Tran

  I just set up a DNS server and a web server using Virtualbox. The IP address of the DNS server is 192.168.56.101 and the web server 192.168.56.102. Here are my configuration files for the DNS server: named.conf: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; //query-source address * port 53; //forward first; forwarders { 8.8.8.8; 8.8.4.4; }; listen-on port 53 { 127.0.0.1; 192.168.56.0/24; }; allow-query { localhost; 192.168.56.0/24; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity debug 10; print-category yes; print-time yes; print-severity yes; }; }; zone "quantran.com" in { type master; file "named.quantran.com"; }; zone "56.168.192.in-addr.arpa" in { type master; file "named.192.168.56"; allow-update { none; }; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; named.quantran.com: $TTL 86400 quantran.com. IN SOA dns1.quantran.com. root.quantran.com. ( 100 ; serial 3600 ; refresh 600 ; retry 604800 ; expire 86400 ) IN NS dns1.quantran.com. dns1.quantran.com. IN A 192.168.56.101 www.quantran.com. IN A 192.168.56.102 named.192.168.56: $TTL 86400 $ORIGIN 56.168.192.in-addr.arpa. @ IN SOA dns1.quantran.com. root.quantran.com. ( 100 ; serial 3600 ; refresh 600 ; retry 604800 ; expire 86400 ) ; minimum IN NS dns1.quantran.com. 101.56.168.192.in-addr.arpa. IN PTR dns1.quantran.com. 102 IN PTR www.quantran.com. When I try a normal lookup from the host (I configured so that the only nameserver the host uses is the DNS server 192.168.56.101): quan@quantran:~$ host www.quantran.com www.quantran.com has address 192.168.56.102 quan@quantran:~$ host dns1.quantran.com dns1.quantran.com has address 192.168.56.101 But when I try a reverse lookup: quan@quantran:~$ host -v 192.168.56.101 192.168.56.101 Trying "101.56.168.192.in-addr.arpa" Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 101.56.168.192.in-addr.arpa not found: 2(SERVFAIL) Received 45 bytes from 192.168.56.101#53 in 0 ms quan@quantran:~$ host -v 192.168.56.102 192.168.56.101 Trying "102.56.168.192.in-addr.arpa" Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 102.56.168.192.in-addr.arpa not found: 2(SERVFAIL) Received 45 bytes from 192.168.56.101#53 in 0 ms So why can't I perform a reverse lookup? Anything wrong with the zone configuration files? Thanks in advance :) Oh, here is the output from the log file /var/named/data/named.run when I perform the reverse lookup: quan@quantran:~$ host 192.168.56.102 192.168.56.101 Using domain server: Name: 192.168.56.101 Address: 192.168.56.101#53 Aliases: Host 102.56.168.192.in-addr.arpa not found: 2(SERVFAIL) /var/named/data/named.run: 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: UDP request 02-Jun-2014 15:18:11.950 client: debug 5: client 192.168.56.1#51786: using view '_default' 02-Jun-2014 15:18:11.950 security: debug 3: client 192.168.56.1#51786: request is not signed 02-Jun-2014 15:18:11.950 security: debug 3: client 192.168.56.1#51786: recursion available 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: query 02-Jun-2014 15:18:11.950 client: debug 10: client 192.168.56.1#51786: ns_client_attach: ref = 1 02-Jun-2014 15:18:11.950 query-errors: debug 1: client 192.168.56.1#51786: query failed (SERVFAIL) for 102.56.168.192.in-addr.arpa/IN/PTR at query.c:5428 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: error 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: send 02-Jun-2014 15:18:11.950 client: debug 3: client 192.168.56.1#51786: sendto 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: senddone 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: next 02-Jun-2014 15:18:11.951 client: debug 10: client 192.168.56.1#51786: ns_client_detach: ref = 0 02-Jun-2014 15:18:11.951 client: debug 3: client 192.168.56.1#51786: endrequest 02-Jun-2014 15:18:11.951 client: debug 3: client @0xb537e008: udprecv Also, I made some changes to the log section in named.conf.

  Read the article

• Httpd restart "Address already in use" error

  - by mtndesign

  I have an .rpm, which I created. In its %post part, I do some stuff, and in the end of this script, i call service httpd restart. It gives the following error: + service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:81 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:81 no listening sockets available, shutting down Unable to open logs [FAILED] I got this from the rpm verbose installing (-vv). So I know its about httpd restart itself, nothing else. The according to netstat only one process (httpd) is listening on port 81. $ sudo netstat -nlp | grep 81 tcp 0 0 :::81 :::* LISTEN 29670/httpd I don't understand, why running http FAILS at stop, and FAILS again in start. Any ideas how to solve this?

  Read the article

• Anyone love/hate the PowerConnect line of switches from Dell?

  - by Rob Bergin

  I am looking at replacing some unmanaged 16 port store bought GB switches and wanted to go with Cisco but it may be cost prohibitive. Instead I am looking at ProCurve or Dell's PowerConnect line up. I am looking for SNMP, Management, VLANs, and SFLOW would icing on the switch cupcake. I would get the 6224 or the 6248 and then maybe add the RPS-600 to it for redundant power. I think the RPS-600 supports multiple switches. Rackspace is also a little challenge so I am trying to do it with as little Rack Units as possible. Ideally I would go with two 6224's or a single 6248 and then do two VLANs. Thanks for any feedback. Rob

  Read the article

• What causes "All-in-one USB Card Reader" to create 6 drives that always appear in Disk Management?

  - by tim11g

  I installed a "All-in-one USB Card Reader" to read SD cards and other media. It has caused six new drives to appear in Disk Management with six new drive letter assignments. These drives and letters are always present, even when there are no cards in the reader. When unused, they are labeled "No Media". Why does this multifunction reader cause these phantom Disks to appear and consume drive letters? Every USB port can (and does) allow removable media to be mounted and assigned a drive letter, and the drive letter assignment "disappears" when the USB drive is removed. Why are these card reader's drives and letters staying allocated permanently? Is there anything that can be done to make the slots work like a typical USB drive? (The reader is in fact connected to USB).

  Read the article

• Accessing my Rails webrick behind proxy?

  - by Eki Eqbal

  In my mackbook, when I try to connect to my rails application in office I can't , in the office there are some http proxy , and when I run my rails like this : sudo rails s -p8080 => Booting WEBrick => Rails 3.0.5 application starting in development on http://0.0.0.0:8080 => Call with -d to detach => Ctrl-C to shutdown server [2012-03-20 12:49:34] INFO WEBrick 1.3.1 [2012-03-20 12:49:34] INFO ruby 1.8.7 (2010-01-10) [universal-darwin11.0] [2012-03-20 12:49:34] INFO WEBrick::HTTPServer#start: pid=17439 port=8080 The local IP is : en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether f8:1e:df:d8:8c:25 inet6 fe80::fa1e:dfff:fed8:8c25%en1 prefixlen 64 scopeid 0x5 inet 10.21.21.240 netmask 0xffffff00 broadcast 10.21.21.255 media: autoselect status: active so when I try in the browser to trigger localhost:8080 or 10.21.21.240:8080 , it seems that I can't trigger my application as for the proxy check out the following : Any Ideas ?

  Read the article

• Prevent IIS7 HTTPS from binding to all SSL IP addresses

  - by robpaveza

  I've had this interesting problem with IIS7. I have a number of HTTPS sites in IIS7. That hasn't been a problem, until I wanted to go and set up VisualSVN Server using an SSL certificate. The installer had trouble starting the service. When I looked in the event log, the error was that "the file is already in use by another process." I figured that the "file" was really a socket, and checked with netstat - even though IIS was only bound to three specific IP addresses (.160, .156, and .168) with port 443, it was consuming *:443. I could stop the World Wide Web Publishing Service, start VisualSVN, and then start IIS, but then none of my SSL servers would start. Any helpful hints about how I could make IIS not try to default-bind to *:443? Thanks!!

  Read the article

• USB drivers installed twice

  - by stupid-phil

  Hello, I have a problem with usb drivers on Windows 7 64bit When I start up my laptop, the mouse I have plugged into a usb port does not work. I have to open the device manager, where there are two "Standard Enhanced PCI to USB Host Controller" entries. One is marked as faulty (yellow triangle). I uninstall this. Scan for changes. Then it re-appears, but not marked as faulty. And the mouse works. I have to do this every time I reboot. A colleague has the same problem. Both DELL laptops, but different models. I've tried uninstalling all USB controllers, but after a reboot, they are all reinstalled with the faulty entry. This only started happening in the last few weeks. Any help appreciated. It's driving me nuts. Thanks Phil

  Read the article

• mount: mount to NFS server 'IPADDRESS' failed: RPC Error: Program not registered

  - by matt74tm

  I've got two Redhat5/CentOS systems which share a folder. I'm trying to change the shared folder location, but I ran into this error on the machine on which the folder is mounted... How can I correct this? I rebooted the computer but to no avail. Server1 - where its "mounted" /etc/fstab IPADDRESS2:/opt/programA/common/files /srv/server2-share nfs rw,intr 0 0 Server2 - where its "shared" /etc/exports /opt/programA/common/files IPADDRESS1/28(rw,insecure,sync,no_root_squash) Ran the following on Server2 root@server2 [~]# /etc/init.d/nfs start root@server2 [~]# rpcinfo -p program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100011 1 udp 875 rquotad 100011 2 udp 875 rquotad 100011 1 tcp 875 rquotad 100011 2 tcp 875 rquotad 100005 1 udp 892 mountd 100005 1 tcp 892 mountd 100005 2 udp 892 mountd 100005 2 tcp 892 mountd 100005 3 udp 892 mountd 100005 3 tcp 892 mountd root@server2 [~]# /etc/init.d/nfs status rpc.mountd (pid 10204) is running... nfsd (pid 10201 10200 10199 10198 10197 10196 10195 10194) is running... rpc.rquotad (pid 10189) is running...

  Read the article

• Websphere SSL handshake with active directory cluster

  - by ring bearer

  We have a WebSphere based application that uses Active Directory(AD) based security configurations. Under WebSphere "Global security" we have configured the active directory server and connection parameters. Active directory server is actually a cluster of four servers, say, serverdc01, serverdc02,serverdc03 and serverdc04. Each of these servers have their own root certificate with CN=serverdc01, CN=serverdc02 ..so on. So to set up SSL communication, I need to retrieve certificate of active directory and save it in WebSphere's trust store. When I retrieve certificate by putting AD server name, port and retrieve certificate I randomly get certificate of one of the serverdc01,serverdc02 ... Then I save that certificate to trust store. Question is : Do I have to save certificate from each of the serverdc01,serverdc02 ...in cluster to WebSphere's trust store? What are general strategies so that each server in the cluster does not require its own root certificate?

  Read the article

• Apache can't connect to LDAP server

  - by jldugger

  I'm tying SVN to LDAPS by way of Apache. I've run openssl s_client --host $host --port 636 and received an SSL certificate, so it doesn't appear to be a firewall problem. I get the following warning: [Fri Apr 02 07:38:15 2010] [warn] [client <ip withheld>] [590] auth_ldap authenticate: user jldugger authentication failed; URI /internal-svn [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] "Can't contact LDAP server" is somewhere between vague and wrong. I'm at a loss on how to continue debugging this. Ideas?

  Read the article

• router w/ WOL out-of-the-box, or is known to work with open firmware

  - by Jaroslav Záruba

  I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed to dd-wrt I'd prefer if the new one supported WOL out-of-the-box. other required features would be: dyndns service support port forwarding sometimes it is called "virtual server" I guess NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes) did I mention WiFi? preferably w/ some range extending technology, if such stuff works at all

  Read the article

• Running dnsmasq as an authoritative DNS server

  - by Lord Loh.

  I am trying to implement a dynamic dns service for my computers. I have pointed h.lohray.com to my EC2 instance in the NS record of lohray.com and have installed dnsmasq on that system and have made sure to unblock the firewall port. For now, I have statistically added an entry on my /etc/hosts file. 129.118.19.163 i7.h.lohray.com however, i7.h.lohray.com does not resolve correctly with nslookup or dig :-( This is the only time I could have this resolved (online nslookup) - 50.19.103.190 is the IP address of the EC2 instance where dnsmasq is running. Where could I have gone wrong?

  Read the article

• chroot'ing SSH home directories, shell problem.

  - by Hamza

  Hi folks, I am trying to chroot my SSH users to their home directories and it seems to work.. in a strange way. Here is what I have in my sshd_config: Match group restricthome ChrootDirectory %h The permissions on the user directories looks like this: drwxr-xr-x 2 root root 1024 May 11 13:45 [user]/ And I can see that the user logs in successfully: May 11 13:49:23 box sshd[5695]: Accepted password for [user] from x.x.x.x port 2358 ssh2 (with no error messages after this) But after entering the password the PuTTY window closes down. This is a wild guess, but could it be because the user's shell is set to /bin/bash and it can't execute because of the chroot? If so, could you give me pointers on how to fix it? Would simply copying the bash binary into user's home directory and modyfying the shell work? How would I deal with the dependencies, ldd shows quite a few of those :) Comments/suggestions will be appreciated. Thanks.

  Read the article

• Why are certain default application associations "locked"?

  - by H.B.

  Edit: As i now have three answers that do not answer the question: This question is not about getting the association to work again. I do not like fighting symptoms, i prefer cures. After associating my MP3 files with MPlayer using the Open with/Choose default program... dialogue i can no longer change that association using said dialogue, the Always use this [...] Checkbox is henceforth always greyed out (Control Panel > Default Programs > Associate a file type or protocol with a program does not let me change it either, it seems to just use the same dialogue anyway). That also happened for MP4s but not for MKVs for example, and if i associate my MP3s with other applications like VLC it does not get blocked. I would really like to know why that is and if i can avoid this beforehand (thankfully i know ways to fix it afterwards already). Edit: Another obervation: The blocking programs (i managed to block it with an association to Visual Studio as well) do not appear in the Recommended Programs of the open-with-dialogue (And the explorer said: "The current program is not recommended, but i won't let you change it, ha!"). Edit: A screenshot as requested: As you can see on the top left (if you know the icon of MPlayer), the file is currently associated with MPlayer. Edit: Ways to fix it (Note: This question is not about fixing it) Using the Default Programs Control Panel > Default Programs > Set Default Programs, select WMP, Choose defaults for this program, check .mp3 This should reassociate the files with WMP and you can create a new association in the explorer. Using the registry (As always, keep your hands off it unless you know what you are doing or if you are fine with accidentally breaking your system) HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > FileExts > .mp3 Here you could for example clean up the open-with-list, and the current default program seems to be saved here as well in the key UserChoice, there you can change the ProgId string to another application, you can associate it with WMP by entering WMP11.AssocFile.MP3 or just pick another application right away. You may need to mess with permissions on the key though, if you cannot change the ProgId value.

  Read the article

• PostgreSQL won't start anymore

  - by Sander Declerck

  Today, my PostgreSQL doesn't start anymore on my windows machine... I've tried to start the service in windows services and got the following error: Windows could not start the PostgreSQL Database Server 8.3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion. Then I went to the command line to manually start C:/Program Files (x86)/PostgreSQL/8.3/bin/psql.exe, and then I got this error: psql: Could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "???" and accepting TCP/IP connections on port 5432? Edit: I found this in the logs: 2011-04-22 13:13:16 CEST LOG: could not receive data from client: No connection could be made because the target machine actively refused it. 2011-04-22 13:13:16 CEST LOG: unexpected EOF on client connection

  Read the article

• Unknown protocol when trying to connect to remote host with stunnel

  - by RaYell

  I'm trying to set up a stunnel for WebDav on Windows. I want to connect 80 port on my local interface to 443 on another machine in my network. I can ping the machine remote machine. However when I use the tunnel, I'm getting this error all the time SSL state (accept): before/accept initialization SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol There is nothing in the logs on the other machine and here's my stunnel connection config [https] accept = 127.0.0.2:80 connect = 10.0.0.60:443 verify = 0 I've set it up to accept all certificates so this shouldn't be a problem with a self-signed certificate remote host uses. Does anyone knows what might be the problem that this connection cannot be eastablished?

  Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >